Sometimes firmware may enter strange state or infinite
loop due to unknown bug, and then it will lead critical
function fail, such as sending H2C command or changing
power mode. In these abnormal states, we add more debug
information, including hardware register status, to help
further investigation.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231016053554.744180-3-pkshih@realtek.com
Get ahead of the game and fix all the -Wformat=2 noted warnings in the
intel drivers directory.
There are one set of i40e and iavf warnings I couldn't figure out how to
fix because the driver is already using vsnprintf without an explicit
"const char *" format string.
Tested with both gcc-12 and clang-15. I found gcc-12 runs clean after
this series but clang-15 is a little worried about the vsnprintf lines.
summary of warnings:
drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c:148:34: warning: format string is not a string literal [-Wformat-nonliteral]
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1416:24: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1416:24: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1421:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c:1421:6: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/igc/igc_ethtool.c:776:24: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/igc/igc_ethtool.c:776:24: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/igc/igc_ethtool.c:779:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/igc/igc_ethtool.c:779:6: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/iavf/iavf_ethtool.c:199:34: warning: format string is not a string literal [-Wformat-nonliteral]
drivers/net/ethernet/intel/igb/igb_ethtool.c:2360:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/igb/igb_ethtool.c:2360:6: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/igb/igb_ethtool.c:2363:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/igb/igb_ethtool.c:2363:6: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/i40e/i40e_ethtool.c:208:34: warning: format string is not a string literal [-Wformat-nonliteral]
drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2515:23: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2515:23: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2519:23: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/i40e/i40e_ethtool.c:2519:23: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/ice/ice_ethtool.c:1064:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/ice/ice_ethtool.c:1064:6: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/ice/ice_ethtool.c:1084:6: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/ice/ice_ethtool.c:1084:6: note: treat the string as an argument to avoid this
drivers/net/ethernet/intel/ice/ice_ethtool.c:1100:24: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
drivers/net/ethernet/intel/ice/ice_ethtool.c:1100:24: note: treat the string as an argument to avoid this
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231017190411.2199743-3-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix -Wformat-truncated warnings to complete the intel directories' W=1
clean efforts. The W=1 recently got enhanced with a few new flags and
this brought up some new warnings.
Switch to using kasprintf() when possible so we always allocate the
right length strings.
summary of warnings:
drivers/net/ethernet/intel/iavf/iavf_virtchnl.c:1425:60: warning: ‘%s’ directive output may be truncated writing 4 bytes into a region of size between 1 and 11 [-Wformat-truncation=]
drivers/net/ethernet/intel/iavf/iavf_virtchnl.c:1425:17: note: ‘snprintf’ output between 7 and 17 bytes into a destination of size 13
drivers/net/ethernet/intel/ice/ice_ptp.c:43:27: warning: ‘%s’ directive output may be truncated writing up to 479 bytes into a region of size 64 [-Wformat-truncation=]
drivers/net/ethernet/intel/ice/ice_ptp.c:42:17: note: ‘snprintf’ output between 1 and 480 bytes into a destination of size 64
drivers/net/ethernet/intel/igb/igb_main.c:3092:53: warning: ‘%d’ directive output may be truncated writing between 1 and 5 bytes into a region of size between 1 and 13 [-Wformat-truncation=]
drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note: directive argument in the range [0, 65535]
drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note: directive argument in the range [0, 65535]
drivers/net/ethernet/intel/igb/igb_main.c:3090:25: note: ‘snprintf’ output between 23 and 43 bytes into a destination of size 32
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231017190411.2199743-2-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mii_bus API conversion to read_c45() and write_c45() did not cover
the mdio-mux driver before read() and write() were made C22-only.
This broke arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dtso.
The -EOPNOTSUPP from mdiobus_c45_read() is transformed by
get_phy_c45_devs_in_pkg() into -EIO, is further propagated to
of_mdiobus_register() and this makes the mdio-mux driver fail to probe
the entire child buses, not just the PHYs that cause access errors.
Fix the regression by introducing special c45 read and write accessors
to mdio-mux which forward the operation to the parent MDIO bus.
Fixes: db1a63aed8 ("net: phy: Remove fallback to old C45 method")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20231017143144.3212657-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sometimes Tx is completed immediately after doorbell is updated, which
causes Tx completion routing to update completion bytes before the
same packet bytes are updated in sent bytes in transmit function, hence
hitting BUG_ON() in dql_completed(). To avoid this, update BQL
sent bytes before ringing doorbell.
Fixes: 37d79d0596 ("octeon_ep: add Tx/Rx processing and interrupt support")
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Link: https://lore.kernel.org/r/20231017105030.2310966-1-srasheed@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Runtime power management support breaks Intel LTE modem where dmesg dump
showes timeout errors:
```
[ 72.027442] iosm 0000:01:00.0: msg timeout
[ 72.531638] iosm 0000:01:00.0: msg timeout
[ 73.035414] iosm 0000:01:00.0: msg timeout
[ 73.540359] iosm 0000:01:00.0: msg timeout
```
Furthermore, when shutting down with `poweroff` and modem attached, the
system rebooted instead of powering down as expected. The modem works
again only after power cycling.
Revert runtime power management support for IOSM driver as introduced by
commit e4f5073d53 ("net: wwan: iosm: enable runtime pm support for
7560").
Fixes: e4f5073d53 ("net: wwan: iosm: enable runtime pm support for 7560")
Reported-by: Martin <mwolf@adiumentum.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217996
Link: https://lore.kernel.org/r/267abf02-4b60-4a2e-92cd-709e3da6f7d3@gmail.com/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The capabilities for the EHT mesh are generated from the capabilities
reported by the firmware. But the firmware only reports the overall
capabilities and not the one which are specific for mesh.
Capabilities which requires infrastructure setup with a main STA(AP)
controlling operations are not needed for mesh and hence remove these
capabilities from the list.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0-02903-QCAHKSWPL_SILICONZ-1
Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231013070007.25597-3-quic_rgnanase@quicinc.com
Saeed Mahameed says:
====================
mlx5-updates-2023-10-10
1) Adham Faris, Increase max supported channels number to 256
2) Leon Romanovsky, Allow IPsec soft/hard limits in bytes
3) Shay Drory, Replace global mlx5_intf_lock with
HCA devcom component lock
4) Wei Zhang, Optimize SF creation flow
During SF creation, HCA state gets changed from INVALID to
IN_USE step by step. Accordingly, FW sends vhca event to
driver to inform about this state change asynchronously.
Each vhca event is critical because all related SW/FW
operations are triggered by it.
Currently there is only a single mlx5 general event handler
which not only handles vhca event but many other events.
This incurs huge bottleneck because all events are forced
to be handled in serial manner.
Moreover, all SFs share same table_lock which inevitably
impacts each other when they are created in parallel.
This series will solve this issue by:
1. A dedicated vhca event handler is introduced to eliminate
the mutual impact with other mlx5 events.
2. Max FW threads work queues are employed in the vhca event
handler to fully utilize FW capability.
3. Redesign SF active work logic to completely remove
table_lock.
With above optimization, SF creation time is reduced by 25%,
i.e. from 80s to 60s when creating 100 SFs.
Patches summary:
Patch 1 - implement dedicated vhca event handler with max FW
cmd threads of work queues.
Patch 2 - remove table_lock by redesigning SF active work
logic.
* tag 'mlx5-updates-2023-10-10' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Allow IPsec soft/hard limits in bytes
net/mlx5e: Increase max supported channels number to 256
net/mlx5e: Preparations for supporting larger number of channels
net/mlx5e: Refactor mlx5e_rss_init() and mlx5e_rss_free() API's
net/mlx5e: Refactor mlx5e_rss_set_rxfh() and mlx5e_rss_get_rxfh()
net/mlx5e: Refactor rx_res_init() and rx_res_free() APIs
net/mlx5e: Use PTR_ERR_OR_ZERO() to simplify code
net/mlx5: Use PTR_ERR_OR_ZERO() to simplify code
net/mlx5: fix config name in Kconfig parameter documentation
net/mlx5: Remove unused declaration
net/mlx5: Replace global mlx5_intf_lock with HCA devcom component lock
net/mlx5: Refactor LAG peer device lookout bus logic to mlx5 devcom
net/mlx5: Avoid false positive lockdep warning by adding lock_class_key
net/mlx5: Redesign SF active work to remove table_lock
net/mlx5: Parallelize vhca event handling
====================
Link: https://lore.kernel.org/r/20231014171908.290428-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect both hi.data.modename and hi.data.drivername to be
NUL-terminated based on its usage with sprintf:
| sprintf(hi.data.modename, "%sclk,%smodem,fclk=%d,bps=%d%s",
| bc->cfg.intclk ? "int" : "ext",
| bc->cfg.extmodem ? "ext" : "int", bc->cfg.fclk, bc->cfg.bps,
| bc->cfg.loopback ? ",loopback" : "");
Note that this data is copied out to userspace with:
| if (copy_to_user(data, &hi, sizeof(hi)))
... however, the data was also copied FROM the user here:
| if (copy_from_user(&hi, data, sizeof(hi)))
Considering the above, a suitable replacement is strscpy_pad() as it
guarantees NUL-termination on the destination buffer while also
NUL-padding (which is good+wanted behavior when copying data to
userspace).
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231016-strncpy-drivers-net-hamradio-baycom_epp-c-v2-1-39f72a72de30@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide a new method, mac_get_caps() to get the MAC capabilities for
the specified interface mode. This is for MACs which have special
requirements, such as not supporting half-duplex in certain interface
modes, and will replace the validate() method.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qsPk5-009wiX-G5@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recent FW interface update bumped the size of struct hwrm_func_cfg_input
above 128B which is the max some devices support.
Probe on Stratus (BCM957452) with FW 20.8.3.11 fails with:
bnxt_en ...: Unable to reserve tx rings
bnxt_en ...: 2nd rings reservation failed.
bnxt_en ...: Not enough rings available.
Once probe is fixed other errors pop up:
bnxt_en ...: Failed to set async event completion ring.
This is because __hwrm_send() rejects requests larger than
bp->hwrm_max_ext_req_len with -E2BIG. Since the driver doesn't
actually access any of the new fields, yet, trim the length.
It should be safe.
Similar workaround exists for backing_store_cfg_input.
Although that one mins() to a constant of 256, not 128
we'll effectively use here. Michael explains: "the backing
store cfg command is supported by relatively newer firmware
that will accept 256 bytes at least."
To make debugging easier in the future add a warning
for oversized requests.
Fixes: 754fbf604f ("bnxt_en: Update firmware interface to 1.10.2.171")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231016171640.1481493-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kalle Valo says:
====================
wireless-next patches for v6.7
The second pull request for v6.7, with only driver changes this time.
We have now support for mt7925 PCIe and USB variants, few new features
and of course some fixes.
Major changes:
mt76
- mt7925 support
ath12k
- read board data variant name from SMBIOS
wfx
- Remain-On-Channel (ROC) support
* tag 'wireless-next-2023-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (109 commits)
wifi: rtw89: mac: do bf_monitor only if WiFi 6 chips
wifi: rtw89: mac: set bf_assoc capabilities according to chip gen
wifi: rtw89: mac: set bfee_ctrl() according to chip gen
wifi: rtw89: mac: add registers of MU-EDCA parameters for WiFi 7 chips
wifi: rtw89: mac: generalize register of MU-EDCA switch according to chip gen
wifi: rtw89: mac: update RTS threshold according to chip gen
wifi: rtlwifi: simplify TX command fill callbacks
wifi: hostap: remove unused ioctl function
wifi: atmel: remove unused ioctl function
wifi: rtw89: coex: add annotation __counted_by() to struct rtw89_btc_btf_set_mon_reg
wifi: rtw89: coex: add annotation __counted_by() for struct rtw89_btc_btf_set_slot_table
wifi: rtw89: add EHT radiotap in monitor mode
wifi: rtw89: show EHT rate in debugfs
wifi: rtw89: parse TX EHT rate selected by firmware from RA C2H report
wifi: rtw89: Add EHT rate mask as parameters of RA H2C command
wifi: rtw89: parse EHT information from RX descriptor and PPDU status packet
wifi: radiotap: add bandwidth definition of EHT U-SIG
wifi: rtlwifi: use convenient list_count_nodes()
wifi: p54: Annotate struct p54_cal_database with __counted_by
wifi: brcmfmac: fweh: Add __counted_by for struct brcmf_fweh_queue_item and use struct_size()
...
====================
Link: https://lore.kernel.org/r/20231016143822.880D8C433C8@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provides MCTP network transport over an I3C bus, as specified in
DMTF DSP0233.
Each I3C bus (with "mctp-controller" devicetree property) gets an
"mctpi3cX" net device created. I3C devices are reachable as remote
endpoints through that net device. Link layer addressing uses the
I3C PID as a fixed hardware address for neighbour table entries.
The driver matches I3C devices that have the MIPI assigned DCR 0xCC for
MCTP.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The tsnep network controller is able to extend the descriptor directly
with data to be transmitted. In this case no TX data DMA address is
necessary. Instead of the TX data DMA address the TX data buffer is
placed at the end of the descriptor.
The descriptor is read with a 64 bytes DMA read by the tsnep network
controller. If the sum of descriptor data and TX data is less than or
equal to 64 bytes, then no additional DMA read is necessary to read the
TX data. Therefore, it makes sense to inline small fragments up to this
limit within the descriptor ring.
Inlined fragments need to be copied to the descriptor ring. On the other
hand DMA mapping is not necessary. At most 40 bytes are copied, so
copying should be faster than DMA mapping.
For A53 1.2 GHz copying takes <100ns and DMA mapping takes >200ns. So
inlining small fragments should result in lower CPU load. Performance
improvement is small. Thus, comparision of CPU load with and without
inlining of small fragments did not show any significant difference.
With this optimization less DMA reads will be done, which decreases the
load of the interconnect.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The route lookup can be done now via generic function
udp_tunnel_dst_lookup() to replace the custom implementations in
vxlan_get_route().
Note that this patch only touches IPv4, while IPv6 still uses
vxlan6_get_route(). After IPv6 route lookup gets converted as well,
vxlan_xmit_one() can be simplified by removing local variables that
will be passed via "struct ip_tunnel_key", such as remote_ip,
local_ip, flow_flags, label.
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
