Pull perf event updates from Ingo Molnar:
- Improve Intel uncore PMU support:
- Parse uncore 'discovery tables' - a new hardware capability
enumeration method introduced on the latest Intel platforms. This
table is in a well-defined PCI namespace location and is read via
MMIO. It is organized in an rbtree.
These uncore tables will allow the discovery of standard counter
blocks, but fancier counters still need to be enumerated
explicitly.
- Add Alder Lake support
- Improve IIO stacks to PMON mapping support on Skylake servers
- Add Intel Alder Lake PMU support - which requires the introduction of
'hybrid' CPUs and PMUs. Alder Lake is a mix of Golden Cove ('big')
and Gracemont ('small' - Atom derived) cores.
The CPU-side feature set is entirely symmetrical - but on the PMU
side there's core type dependent PMU functionality.
- Reduce data loss with CPU level hardware tracing on Intel PT / AUX
profiling, by fixing the AUX allocation watermark logic.
- Improve ring buffer allocation on NUMA systems
- Put 'struct perf_event' into their separate kmem_cache pool
- Add support for synchronous signals for select perf events. The
immediate motivation is to support low-overhead sampling-based race
detection for user-space code. The feature consists of the following
main changes:
- Add thread-only event inheritance via
perf_event_attr::inherit_thread, which limits inheritance of
events to CLONE_THREAD.
- Add the ability for events to not leak through exec(), via
perf_event_attr::remove_on_exec.
- Allow the generation of SIGTRAP via perf_event_attr::sigtrap,
extend siginfo with an u64 ::si_perf, and add the breakpoint
information to ::si_addr and ::si_perf if the event is
PERF_TYPE_BREAKPOINT.
The siginfo support is adequate for breakpoints right now - but the
new field can be used to introduce support for other types of
metadata passed over siginfo as well.
- Misc fixes, cleanups and smaller updates.
* tag 'perf-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
signal, perf: Add missing TRAP_PERF case in siginfo_layout()
signal, perf: Fix siginfo_t by avoiding u64 on 32-bit architectures
perf/x86: Allow for 8<num_fixed_counters<16
perf/x86/rapl: Add support for Intel Alder Lake
perf/x86/cstate: Add Alder Lake CPU support
perf/x86/msr: Add Alder Lake CPU support
perf/x86/intel/uncore: Add Alder Lake support
perf: Extend PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE
perf/x86/intel: Add Alder Lake Hybrid support
perf/x86: Support filter_match callback
perf/x86/intel: Add attr_update for Hybrid PMUs
perf/x86: Add structures for the attributes of Hybrid PMUs
perf/x86: Register hybrid PMUs
perf/x86: Factor out x86_pmu_show_pmu_cap
perf/x86: Remove temporary pmu assignment in event_init
perf/x86/intel: Factor out intel_pmu_check_extra_regs
perf/x86/intel: Factor out intel_pmu_check_event_constraints
perf/x86/intel: Factor out intel_pmu_check_num_counters
perf/x86: Hybrid PMU support for extra_regs
perf/x86: Hybrid PMU support for event constraints
...
Pull RCU updates from Ingo Molnar:
- Support for "N" as alias for last bit in bitmap parsing library (eg
using syntax like "nohz_full=2-N")
- kvfree_rcu updates
- mm_dump_obj() updates. (One of these is to mm, but was suggested by
Andrew Morton.)
- RCU callback offloading update
- Polling RCU grace-period interfaces
- Realtime-related RCU updates
- Tasks-RCU updates
- Torture-test updates
- Torture-test scripting updates
- Miscellaneous fixes
* tag 'core-rcu-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
rcutorture: Test start_poll_synchronize_rcu() and poll_state_synchronize_rcu()
rcu: Provide polling interfaces for Tiny RCU grace periods
torture: Fix kvm.sh --datestamp regex check
torture: Consolidate qemu-cmd duration editing into kvm-transform.sh
torture: Print proper vmlinux path for kvm-again.sh runs
torture: Make TORTURE_TRUST_MAKE available in kvm-again.sh environment
torture: Make kvm-transform.sh update jitter commands
torture: Add --duration argument to kvm-again.sh
torture: Add kvm-again.sh to rerun a previous torture-test
torture: Create a "batches" file for build reuse
torture: De-capitalize TORTURE_SUITE
torture: Make upper-case-only no-dot no-slash scenario names official
torture: Rename SRCU-t and SRCU-u to avoid lowercase characters
torture: Remove no-mpstat error message
torture: Record kvm-test-1-run.sh and kvm-test-1-run-qemu.sh PIDs
torture: Record jitter start/stop commands
torture: Extract kvm-test-1-run-qemu.sh from kvm-test-1-run.sh
torture: Record TORTURE_KCONFIG_GDB_ARG in qemu-cmd
torture: Abstract jitter.sh start/stop into scripts
rcu: Provide polling interfaces for Tree RCU grace periods
...
Pull KUnit updates from Shuah Khan:
"Several fixes and a new feature to support failure from dynamic
analysis tools such as UBSAN and fake ops for testing.
- a fake ops struct for testing a "free" function to complain if it
was called with an invalid argument, or caught a double-free. Most
return void and have no normal means of signalling failure (e.g.
super_operations, iommu_ops, etc.)"
* tag 'linux-kselftest-kunit-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: kunit: add tips for using current->kunit_test
kunit: fix -Wunused-function warning for __kunit_fail_current_test
kunit: support failure from dynamic analysis tools
kunit: tool: make --kunitconfig accept dirs, add lib/kunit fragment
kunit: make KUNIT_EXPECT_STREQ() quote values, don't print literals
kunit: Match parenthesis alignment to improve code readability
Pull Kselftest updates from Shuah Khan:
- fixes and updates to resctrl test from Fenghua Yu and Reinette Chatre
- fixes to Kselftest documentation, framework
- minor spelling correction in timers test
* tag 'linux-kselftest-next-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits)
selftests/resctrl: Change a few printed messages
Documentation: kselftest: fix path to test module files
selftests/resctrl: Create .gitignore to include resctrl_tests
selftests/resctrl: Fix checking for < 0 for unsigned values
selftests/resctrl: Fix incorrect parsing of iMC counters
selftests/resctrl: Fix unmount resctrl FS
selftests/resctrl: Skip the test if requested resctrl feature is not supported
selftests/resctrl: Modularize resctrl test suite main() function
selftests/resctrl: Don't hard code value of "no_of_bits" variable
selftests/resctrl: Fix MBA/MBM results reporting format
selftests/resctrl: Use resctrl/info for feature detection
selftests/resctrl: Check for resctrl mount point only if resctrl FS is supported
selftests/resctrl: Add config dependencies
selftests/resctrl: Fix a printed message
selftests/resctrl: Share show_cache_info() by CAT and CMT tests
selftests/resctrl: Call kselftest APIs to log test results
selftests/resctrl: Rename CQM test as CMT test
selftests/resctrl: Fix missing options "-n" and "-p"
selftests/resctrl: Ensure sibling CPU is not same as original CPU
selftests/resctrl: Clean up resctrl features check
...
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core changes for 5.13-rc1.
Nothing major, just lots of little core changes and cleanups, notable
things are:
- finally set 'fw_devlink=on' by default.
All reported issues with this have been shaken out over the past 9
months or so, but we will be paying attention to any fallout here
in case we need to revert this as the default boot value (symptoms
of problems are a simple lack of booting)
- fixes found to be needed by fw_devlink=on value in some subsystems
(like clock).
- delayed work initialization cleanup
- driver core cleanups and minor updates
- software node cleanups and tweaks
- devtmpfs cleanups
- minor debugfs cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (53 commits)
devm-helpers: Fix devm_delayed_work_autocancel() kerneldoc
PM / wakeup: use dev_set_name() directly
software node: Allow node addition to already existing device
kunit: software node: adhear to KUNIT formatting standard
node: fix device cleanups in error handling code
kobject_uevent: remove warning in init_uevent_argv()
debugfs: Make debugfs_allow RO after init
Revert "driver core: platform: Make platform_get_irq_optional() optional"
media: ipu3-cio2: Switch to use SOFTWARE_NODE_REFERENCE()
software node: Introduce SOFTWARE_NODE_REFERENCE() helper macro
software node: Imply kobj_to_swnode() to be no-op
software node: Deduplicate code in fwnode_create_software_node()
software node: Introduce software_node_alloc()/software_node_free()
software node: Free resources explicitly when swnode_register() fails
debugfs: drop pointless nul-termination in debugfs_read_file_bool()
driver core: add helper for deferred probe reason setting
driver core: Improve fw_devlink & deferred_probe_timeout interaction
of: property: fw_devlink: Add support for remote-endpoint
driver core: platform: Make platform_get_irq_optional() optional
driver core: Replace printf() specifier and drop unneeded casting
...
Pull arm64 updates from Catalin Marinas:
- MTE asynchronous support for KASan. Previously only synchronous
(slower) mode was supported. Asynchronous is faster but does not
allow precise identification of the illegal access.
- Run kernel mode SIMD with softirqs disabled. This allows using NEON
in softirq context for crypto performance improvements. The
conditional yield support is modified to take softirqs into account
and reduce the latency.
- Preparatory patches for Apple M1: handle CPUs that only have the VHE
mode available (host kernel running at EL2), add FIQ support.
- arm64 perf updates: support for HiSilicon PA and SLLC PMU drivers,
new functions for the HiSilicon HHA and L3C PMU, cleanups.
- Re-introduce support for execute-only user permissions but only when
the EPAN (Enhanced Privileged Access Never) architecture feature is
available.
- Disable fine-grained traps at boot and improve the documented boot
requirements.
- Support CONFIG_KASAN_VMALLOC on arm64 (only with KASAN_GENERIC).
- Add hierarchical eXecute Never permissions for all page tables.
- Add arm64 prctl(PR_PAC_{SET,GET}_ENABLED_KEYS) allowing user programs
to control which PAC keys are enabled in a particular task.
- arm64 kselftests for BTI and some improvements to the MTE tests.
- Minor improvements to the compat vdso and sigpage.
- Miscellaneous cleanups.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (86 commits)
arm64/sve: Add compile time checks for SVE hooks in generic functions
arm64/kernel/probes: Use BUG_ON instead of if condition followed by BUG.
arm64: pac: Optimize kernel entry/exit key installation code paths
arm64: Introduce prctl(PR_PAC_{SET,GET}_ENABLED_KEYS)
arm64: mte: make the per-task SCTLR_EL1 field usable elsewhere
arm64/sve: Remove redundant system_supports_sve() tests
arm64: fpsimd: run kernel mode NEON with softirqs disabled
arm64: assembler: introduce wxN aliases for wN registers
arm64: assembler: remove conditional NEON yield macros
kasan, arm64: tests supports for HW_TAGS async mode
arm64: mte: Report async tag faults before suspend
arm64: mte: Enable async tag check fault
arm64: mte: Conditionally compile mte_enable_kernel_*()
arm64: mte: Enable TCO in functions that can read beyond buffer limits
kasan: Add report for async mode
arm64: mte: Drop arch_enable_tagging()
kasan: Add KASAN mode kernel parameter
arm64: mte: Add asynchronous mode support
arm64: Get rid of CONFIG_ARM64_VHE
arm64: Cope with CPUs stuck in VHE mode
...
Pull entry code update from Thomas Gleixner:
"Provide support for randomized stack offsets per syscall to make
stack-based attacks harder which rely on the deterministic stack
layout.
The feature is based on the original idea of PaX's RANDSTACK feature,
but uses a significantly different implementation.
The offset does not affect the pt_regs location on the task stack as
this was agreed on to be of dubious value. The offset is applied
before the actual syscall is invoked.
The offset is stored per cpu and the randomization happens at the end
of the syscall which is less predictable than on syscall entry.
The mechanism to apply the offset is via alloca(), i.e. abusing the
dispised VLAs. This comes with the drawback that
stack-clash-protection has to be disabled for the affected compilation
units and there is also a negative interaction with stack-protector.
Those downsides are traded with the advantage that this approach does
not require any intrusive changes to the low level assembly entry
code, does not affect the unwinder and the correct stack alignment is
handled automatically by the compiler.
The feature is guarded with a static branch which avoids the overhead
when disabled.
Currently this is supported for X86 and ARM64"
* tag 'x86-entry-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arm64: entry: Enable random_kstack_offset support
lkdtm: Add REPORT_STACK for checking stack offsets
x86/entry: Enable random_kstack_offset support
stack: Optionally randomize kernel stack offset each syscall
init_on_alloc: Optimize static branches
jump_label: Provide CONFIG-driven build state defaults
Pull timer updates from Thomas Gleixner:
"The time and timers updates contain:
Core changes:
- Allow runtime power management when the clocksource is changed.
- A correctness fix for clock_adjtime32() so that the return value on
success is not overwritten by the result of the copy to user.
- Allow late installment of broadcast clockevent devices which was
broken because nothing switched them over to oneshot mode. This
went unnoticed so far because clockevent devices used to be built
in, but now people started to make them modular.
- Debugfs related simplifications
- Small cleanups and improvements here and there
Driver changes:
- The usual set of device tree binding updates for a wide range of
drivers/devices.
- The usual updates and improvements for drivers all over the place
but nothing outstanding.
- No new clocksource/event drivers. They'll come back next time"
* tag 'timers-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
posix-timers: Preserve return value in clock_adjtime32()
tick/broadcast: Allow late registered device to enter oneshot mode
tick: Use tick_check_replacement() instead of open coding it
time/timecounter: Mark 1st argument of timecounter_cyc2time() as const
dt-bindings: timer: nuvoton,npcm7xx: Add wpcm450-timer
clocksource/drivers/arm_arch_timer: Add __ro_after_init and __init
clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940
clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue
clocksource/drivers/dw_apb_timer_of: Add handling for potential memory leak
clocksource/drivers/npcm: Add support for WPCM450
clocksource/drivers/sh_cmt: Don't use CMTOUT_IE with R-Car Gen2/3
clocksource/drivers/pistachio: Fix trivial typo
clocksource/drivers/ingenic_ost: Fix return value check in ingenic_ost_probe()
clocksource/drivers/timer-ti-dm: Add missing set_state_oneshot_stopped
clocksource/drivers/timer-ti-dm: Fix posted mode status check order
dt-bindings: timer: renesas,cmt: Document R8A77961
dt-bindings: timer: renesas,cmt: Add r8a779a0 CMT support
clocksource/drivers/ingenic-ost: Add support for the JZ4760B
clocksource/drivers/ingenic: Add support for the JZ4760
dt-bindings: timer: ingenic: Add compatible strings for JZ4760(B)
...
Pull x86 SGX updates from Borislav Petkov:
"Add the guest side of SGX support in KVM guests. Work by Sean
Christopherson, Kai Huang and Jarkko Sakkinen.
Along with the usual fixes, cleanups and improvements"
* tag 'x86_sgx_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/sgx: Mark sgx_vepc_vm_ops static
x86/sgx: Do not update sgx_nr_free_pages in sgx_setup_epc_section()
x86/sgx: Move provisioning device creation out of SGX driver
x86/sgx: Add helpers to expose ECREATE and EINIT to KVM
x86/sgx: Add helper to update SGX_LEPUBKEYHASHn MSRs
x86/sgx: Add encls_faulted() helper
x86/sgx: Add SGX2 ENCLS leaf definitions (EAUG, EMODPR and EMODT)
x86/sgx: Move ENCLS leaf definitions to sgx.h
x86/sgx: Expose SGX architectural definitions to the kernel
x86/sgx: Initialize virtual EPC driver even when SGX driver is disabled
x86/cpu/intel: Allow SGX virtualization without Launch Control support
x86/sgx: Introduce virtual EPC for use by KVM guests
x86/sgx: Add SGX_CHILD_PRESENT hardware error code
x86/sgx: Wipe out EREMOVE from sgx_free_epc_page()
x86/cpufeatures: Add SGX1 and SGX2 sub-features
x86/cpufeatures: Make SGX_LC feature bit depend on SGX bit
x86/sgx: Remove unnecessary kmap() from sgx_ioc_enclave_init()
selftests/sgx: Use getauxval() to simplify test code
selftests/sgx: Improve error detection and messages
x86/sgx: Add a basic NUMA allocation scheme to sgx_alloc_epc_page()
...
Pull x86 tool update from Borislav Petkov:
"A new kcpuid tool to dump the raw CPUID leafs of a CPU.
It has the CPUID bit definitions in a separate csv file which allows
for adding support for new CPUID leafs and bits without having to
update the tool.
The main use case for the tool is hw enablement on preproduction x86
hardware"
* tag 'x86_misc_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/x86/kcpuid: Add AMD leaf 0x8000001E
tools/x86/kcpuid: Check last token too
selftests/x86: Add a missing .note.GNU-stack section to thunks_32.S
tools/x86/kcpuid: Add AMD Secure Encryption leaf
tools/x86: Add a kcpuid tool to show raw CPU features
The alignment of a structure is that of its largest member. On
architectures like 32-bit Arm (but not e.g. 32-bit x86) 64-bit integers
will require 64-bit alignment and not its natural word size.
This means that there is no portable way to add 64-bit integers to
siginfo_t on 32-bit architectures without breaking the ABI, because
siginfo_t does not yet (and therefore likely never will) contain 64-bit
fields on 32-bit architectures. Adding a 64-bit integer could change the
alignment of the union after the 3 initial int si_signo, si_errno,
si_code, thus introducing 4 bytes of padding shifting the entire union,
which would break the ABI.
One alternative would be to use the __packed attribute, however, it is
non-standard C. Given siginfo_t has definitions outside the Linux kernel
in various standard libraries that can be compiled with any number of
different compilers (not just those we rely on), using non-standard
attributes on siginfo_t should be avoided to ensure portability.
In the case of the si_perf field, word size is sufficient since there is
no exact requirement on size, given the data it contains is user-defined
via perf_event_attr::sig_data. On 32-bit architectures, any excess bits
of perf_event_attr::sig_data will therefore be truncated when copying
into si_perf.
Since si_perf is intended to disambiguate events (e.g. encoding relevant
information if there are more events of the same type), 32 bits should
provide enough entropy to do so on 32-bit architectures.
For 64-bit architectures, no change is intended.
Fixes: fb6cc127e0 ("signal: Introduce TRAP_PERF si_code and si_perf to siginfo")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lkml.kernel.org/r/20210422191823.79012-1-elver@google.com
Daniel Borkmann says:
====================
pull-request: bpf 2021-04-17
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 9 day(s) which contain
a total of 8 files changed, 175 insertions(+), 111 deletions(-).
The main changes are:
1) Fix a potential NULL pointer dereference in libbpf's xsk
umem handling, from Ciara Loftus.
2) Mitigate a speculative oob read of up to map value size by
tightening the masking window, from Daniel Borkmann.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Update various selftest error messages:
* The 'Rx tried to sub from different maps, paths, or prohibited types'
is reworked into more specific/differentiated error messages for better
guidance.
* The change into 'value -4294967168 makes map_value pointer be out of
bounds' is due to moving the mixed bounds check into the speculation
handling and thus occuring slightly later than above mentioned sanity
check.
* The change into 'math between map_value pointer and register with
unbounded min value' is similarly due to register sanity check coming
before the mixed bounds check.
* The case of 'map access: known scalar += value_ptr from different maps'
now loads fine given masks are the same from the different paths (despite
max map value size being different).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Add a kselftest for testing process-wide perf events with synchronous
SIGTRAP on events (using breakpoints). In particular, we want to test
that changes to the event propagate to all children, and the SIGTRAPs
are in fact synchronously sent to the thread where the event occurred.
Note: The "signal_stress" test case is also added later in the series to
perf tool's built-in tests. The test here is more elaborate in that
respect, which on one hand avoids bloating the perf tool unnecessarily,
but we also benefit from structured tests with TAP-compliant output that
the kselftest framework provides.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210408103605.1676875-8-elver@google.com
Pull RCU changes from Paul E. McKenney:
- Bitmap support for "N" as alias for last bit
- kvfree_rcu updates
- mm_dump_obj() updates. (One of these is to mm, but was suggested by Andrew Morton.)
- RCU callback offloading update
- Polling RCU grace-period interfaces
- Realtime-related RCU updates
- Tasks-RCU updates
- Torture-test updates
- Torture-test scripting updates
- Miscellaneous fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.12-rc7, including fixes from can, ipsec,
mac80211, wireless, and bpf trees.
No scary regressions here or in the works, but small fixes for 5.12
changes keep coming.
Current release - regressions:
- virtio: do not pull payload in skb->head
- virtio: ensure mac header is set in virtio_net_hdr_to_skb()
- Revert "net: correct sk_acceptq_is_full()"
- mptcp: revert "mptcp: provide subflow aware release function"
- ethernet: lan743x: fix ethernet frame cutoff issue
- dsa: fix type was not set for devlink port
- ethtool: remove link_mode param and derive link params from driver
- sched: htb: fix null pointer dereference on a null new_q
- wireless: iwlwifi: Fix softirq/hardirq disabling in
iwl_pcie_enqueue_hcmd()
- wireless: iwlwifi: fw: fix notification wait locking
- wireless: brcmfmac: p2p: Fix deadlock introduced by avoiding the
rtnl dependency
Current release - new code bugs:
- napi: fix hangup on napi_disable for threaded napi
- bpf: take module reference for trampoline in module
- wireless: mt76: mt7921: fix airtime reporting and related tx hangs
- wireless: iwlwifi: mvm: rfi: don't lock mvm->mutex when sending
config command
Previous releases - regressions:
- rfkill: revert back to old userspace API by default
- nfc: fix infinite loop, refcount & memory leaks in LLCP sockets
- let skb_orphan_partial wake-up waiters
- xfrm/compat: Cleanup WARN()s that can be user-triggered
- vxlan, geneve: do not modify the shared tunnel info when PMTU
triggers an ICMP reply
- can: fix msg_namelen values depending on CAN_REQUIRED_SIZE
- can: uapi: mark union inside struct can_frame packed
- sched: cls: fix action overwrite reference counting
- sched: cls: fix err handler in tcf_action_init()
- ethernet: mlxsw: fix ECN marking in tunnel decapsulation
- ethernet: nfp: Fix a use after free in nfp_bpf_ctrl_msg_rx
- ethernet: i40e: fix receiving of single packets in xsk zero-copy
mode
- ethernet: cxgb4: avoid collecting SGE_QBASE regs during traffic
Previous releases - always broken:
- bpf: Refuse non-O_RDWR flags in BPF_OBJ_GET
- bpf: Refcount task stack in bpf_get_task_stack
- bpf, x86: Validate computation of branch displacements
- ieee802154: fix many similar syzbot-found bugs
- fix NULL dereferences in netlink attribute handling
- reject unsupported operations on monitor interfaces
- fix error handling in llsec_key_alloc()
- xfrm: make ipv4 pmtu check honor ip header df
- xfrm: make hash generation lock per network namespace
- xfrm: esp: delete NETIF_F_SCTP_CRC bit from features for esp
offload
- ethtool: fix incorrect datatype in set_eee ops
- xdp: fix xdp_return_frame() kernel BUG throw for page_pool memory
model
- openvswitch: fix send of uninitialized stack memory in ct limit
reply
Misc:
- udp: add get handling for UDP_GRO sockopt"
* tag 'net-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (182 commits)
net: fix hangup on napi_disable for threaded napi
net: hns3: Trivial spell fix in hns3 driver
lan743x: fix ethernet frame cutoff issue
net: ipv6: check for validity before dereferencing cfg->fc_nlinfo.nlh
net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits
net: dsa: lantiq_gswip: Don't use PHY auto polling
net: sched: sch_teql: fix null-pointer dereference
ipv6: report errors for iftoken via netlink extack
net: sched: fix err handler in tcf_action_init()
net: sched: fix action overwrite reference counting
Revert "net: sched: bump refcount for new action in ACT replace mode"
ice: fix memory leak of aRFS after resuming from suspend
i40e: Fix sparse warning: missing error code 'err'
i40e: Fix sparse error: 'vsi->netdev' could be null
i40e: Fix sparse error: uninitialized symbol 'ring'
i40e: Fix sparse errors in i40e_txrx.c
i40e: Fix parameters in aq_get_phy_register()
nl80211: fix beacon head validation
bpf, x86: Validate computation of branch displacements for x86-32
bpf, x86: Validate computation of branch displacements for x86-64
...
Change a few printed messages to report test progress more clearly.
Add a missing "\n" at the end of one printed message.
Suggested-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
TL;DR
$ ./tools/testing/kunit/kunit.py run --kunitconfig=lib/kunit
Per suggestion from Ted [1], we can reduce the amount of typing by
assuming a convention that these files are named '.kunitconfig'.
In the case of [1], we now have
$ ./tools/testing/kunit/kunit.py run --kunitconfig=fs/ext4
Also add in such a fragment for kunit itself so we can give that as an
example more close to home (and thus less likely to be accidentally
broken).
[1] https://lore.kernel.org/linux-ext4/YCNF4yP1dB97zzwD@mit.edu/
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Dan reported following static checker warnings
tools/testing/selftests/resctrl/resctrl_val.c:545 measure_vals()
warn: 'bw_imc' unsigned <= 0
tools/testing/selftests/resctrl/resctrl_val.c:549 measure_vals()
warn: 'bw_resc_end' unsigned <= 0
These warnings are reported because
1. measure_vals() declares 'bw_imc' and 'bw_resc_end' as unsigned long
variables
2. Return value of get_mem_bw_imc() and get_mem_bw_resctrl() are assigned
to 'bw_imc' and 'bw_resc_end' respectively
3. The returned values are checked for <= 0 to see if the calls failed
Checking for < 0 for an unsigned value doesn't make any sense.
Fix this issue by changing the implementation of get_mem_bw_imc() and
get_mem_bw_resctrl() such that they now accept reference to a variable
and set the variable appropriately upon success and return 0, else return
< 0 on error.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
iMC (Integrated Memory Controller) counters are usually at
"/sys/bus/event_source/devices/" and are named as "uncore_imc_<n>".
num_of_imcs() function tries to count number of such iMC counters so that
it could appropriately initialize required number of perf_attr structures
that could be used to read these iMC counters.
num_of_imcs() function assumes that all the directories under this path
that start with "uncore_imc" are iMC counters. But, on some systems there
could be directories named as "uncore_imc_free_running" which aren't iMC
counters. Trying to read from such directories will result in "not found
file" errors and MBM/MBA tests will fail.
Hence, fix the logic in num_of_imcs() such that it looks at the first
character after "uncore_imc_" to check if it's a numerical digit or not. If
it's a digit then the directory represents an iMC counter, else, skip the
directory.
Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
umount_resctrlfs() directly attempts to unmount resctrl file system without
checking if resctrl FS is already mounted or not. It returns 0 on success
and on failure it prints an error message and returns an error status.
Calling umount_resctrlfs() when resctrl FS isn't mounted will return an
error status.
There could be situations where-in the caller might not know if resctrl
FS is already mounted or not and the caller might still want to unmount
resctrl FS if it's already mounted (For example during teardown).
To support above use cases, change umount_resctrlfs() such that it now
first checks if resctrl FS is already mounted or not and unmounts resctrl
FS only if it's already mounted.
unmount resctrl FS upon exit. For example, running only mba test on a
Broadwell (BDW) machine (MBA isn't supported on BDW CPU).
This happens because validate_resctrl_feature_request() would mount resctrl
FS to check if mba is enabled on the platform or not and finds that the H/W
doesn't support mba and hence will return false to run_mba_test(). This in
turn makes the main() function return without unmounting resctrl FS.
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There could be two reasons why a resctrl feature might not be enabled on
the platform
1. H/W might not support the feature
2. Even if the H/W supports it, the user might have disabled the feature
through kernel command line arguments
Hence, any resctrl unit test (like cmt, cat, mbm and mba) before starting
the test will first check if the feature is enabled on the platform or not.
If the feature isn't enabled, then the test returns with an error status.
For example, if MBA isn't supported on a platform and if the user tries to
run MBA, the output will look like this
ok mounting resctrl to "/sys/fs/resctrl"
not ok MBA: schemata change
But, not supporting a feature isn't a test failure. So, instead of treating
it as an error, use the SKIP directive of the TAP protocol. With the
change, the output will look as below
ok MBA # SKIP Hardware does not support MBA or MBA is disabled
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Resctrl test suite main() function does the following things
1. Parses command line arguments passed by user
2. Some setup checks
3. Logic that calls into each unit test
4. Print result and clean up after running each unit test
Introduce wrapper functions for steps 3 and 4 to modularize the main()
function. Adding these wrapper functions makes it easier to add any logic
to each individual test.
Please note that this is a preparatory patch for the next one and no
functional changes are intended.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cache related tests (like CAT and CMT) depend on a variable called
no_of_bits to run. no_of_bits defines the number of contiguous bits
that should be set in the CBM mask and a user can pass a value for
no_of_bits using -n command line argument. If a user hasn't passed any
value, it defaults to 5 (randomly chosen value).
Hard coding no_of_bits to 5 will make the cache tests fail to run on
systems that support maximum cbm mask that is less than or equal to 5 bits.
Hence, don't hard code no_of_bits value.
If a user passes a value for "no_of_bits" using -n option, use it.
Otherwise, no_of_bits is equal to half of the maximum number of bits in
the cbm mask.
Please note that CMT test is still hard coded to 5 bits. It will change in
subsequent patches that change CMT test.
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
MBM unit test starts fill_buf (default built-in benchmark) in a new con_mon
group (c1, m1) and records resctrl reported mbm values and iMC (Integrated
Memory Controller) values every second. It does this for five seconds
(randomly chosen value) in total. It then calculates average of resctrl_mbm
values and imc_mbm values and if the difference is greater than 300 MB/sec
(randomly chosen value), the test treats it as a failure. MBA unit test is
similar to MBM but after every run it changes schemata.
Checking for a difference of 300 MB/sec doesn't look very meaningful when
the mbm values are changing over a wide range. For example, below are the
values running MBA test on SKL with different allocations
1. With 10% as schemata both iMC and resctrl mbm_values are around 2000
MB/sec
2. With 100% as schemata both iMC and resctrl mbm_values are around 10000
MB/sec
A 300 MB/sec difference between resctrl_mbm and imc_mbm values is
acceptable at 100% schemata but it isn't acceptable at 10% schemata because
that's a huge difference.
So, fix this by checking for percentage difference instead of absolute
difference i.e. check if the difference between resctrl_mbm value and
imc_mbm value is within 5% (randomly chosen value) of imc_mbm value. If the
difference is greater than 5% of imc_mbm value, treat it is a failure.
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Resctrl test suite before running any unit test (like cmt, cat, mbm and
mba) should first check if the feature is enabled (by kernel and not just
supported by H/W) on the platform or not.
validate_resctrl_feature_request() is supposed to do that. This function
intends to grep for relevant flags in /proc/cpuinfo but there are several
issues here
1. validate_resctrl_feature_request() calls fgrep() to get flags from
/proc/cpuinfo. But, fgrep() can only return a string with maximum of 255
characters and hence the complete cpu flags are never returned.
2. The substring search logic is also busted. If strstr() finds requested
resctrl feature in the cpu flags, it returns pointer to the first
occurrence. But, the logic negates the return value of strstr() and
hence validate_resctrl_feature_request() returns false if the feature is
present in the cpu flags and returns true if the feature is not present.
3. validate_resctrl_feature_request() checks if a resctrl feature is
reported in /proc/cpuinfo flags or not. Having a cpu flag means that the
H/W supports the feature, but it doesn't mean that the kernel enabled
it. A user could selectively enable only a subset of resctrl features
using kernel command line arguments. Hence, /proc/cpuinfo isn't a
reliable source to check if a feature is enabled or not.
The 3rd issue being the major one and fixing it requires changing the way
validate_resctrl_feature_request() works. Since, /proc/cpuinfo isn't the
right place to check if a resctrl feature is enabled or not, a more
appropriate place is /sys/fs/resctrl/info directory. Change
validate_resctrl_feature_request() such that,
1. For cat, check if /sys/fs/resctrl/info/L3 directory is present or not
2. For mba, check if /sys/fs/resctrl/info/MB directory is present or not
3. For cmt, check if /sys/fs/resctrl/info/L3_MON directory is present and
check if /sys/fs/resctrl/info/L3_MON/mon_features has llc_occupancy
4. For mbm, check if /sys/fs/resctrl/info/L3_MON directory is present and
check if /sys/fs/resctrl/info/L3_MON/mon_features has
mbm_<total/local>_bytes
Please note that only L3_CAT, L3_CMT, MBA and MBM are supported. CDP and L2
variants can be added later.
Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
check_resctrlfs_support() does the following
1. Checks if the platform supports resctrl file system or not by looking
for resctrl in /proc/filesystems
2. Calls opendir() on default resctrl file system path
(i.e. /sys/fs/resctrl)
3. Checks if resctrl file system is mounted or not by looking at
/proc/mounts
Steps 2 and 3 will fail if the platform does not support resctrl file
system. So, there is no need to check for them if step 1 fails.
Fix this by returning immediately if the platform does not support
resctrl file system.
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
show_cache_info() functions are defined separately in CAT and CMT
tests. But the functions are same for the tests and unnecessary
to be defined separately. Share the function by the tests.
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
CMT (Cache Monitoring Technology) [1] is a H/W feature that reports cache
occupancy of a process. resctrl selftest suite has a unit test to test CMT
for LLC but the test is named as CQM (Cache Quality Monitoring).
Furthermore, the unit test source file is named as cqm_test.c and several
functions, variables, comments, preprocessors and statements widely use
"cqm" as either suffix or prefix. This rampant misusage of CQM for CMT
might confuse someone who is newly looking at resctrl selftests because
this feature is named CMT in the Intel Software Developer's Manual.
Hence, rename all the occurrences (unit test source file name, functions,
variables, comments and preprocessors) of cqm with cmt.
[1] Please see Intel SDM, Volume 3, chapter 17 and section 18 for more
information on CMT: https://software.intel.com/content/www/us/en/develop/articles/intel-sdm.html
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
resctrl test suite accepts command line arguments (like -b, -t, -n and -p)
as documented in the help. But passing -n and -p throws an invalid option
error. This happens because -n and -p are missing in the list of
characters that getopt() recognizes as valid arguments. Hence, they are
treated as invalid options.
Fix this by adding them to the list of characters that getopt() recognizes
as valid arguments. Please note that the main() function already has the
logic to deal with the values passed as part of these arguments and hence
no changes are needed there.
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The resctrl tests can accept a CPU on which the tests are run and use
default of CPU #1 if it is not provided. In the CAT test a "sibling CPU"
is determined that is from the same package where another thread will be
run.
The current algorithm with which a "sibling CPU" is determined does not
take the provided/default CPU into account and when that CPU is the
first CPU in a package then the "sibling CPU" will be selected to be the
same CPU since it starts by picking the first CPU from core_siblings_list.
Fix the "sibling CPU" selection by taking the provided/default CPU into
account and ensuring a sibling that is a different CPU is selected.
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Checking resctrl features call strcmp() to compare feature strings
(e.g. "mba", "cat" etc). The checkings are error prone and don't have
good coding style. Define the constant strings in macros and call
strncmp() to solve the potential issues.
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Reinette reported following compilation issue on Fedora 32, gcc version
10.1.1
/usr/bin/ld: resctrl_tests.o:<src_dir>/resctrl.h:65: multiple definition
of `bm_pid'; cache.o:<src_dir>/resctrl.h:65: first defined here
Other variables are ppid, tests_run, llc_occup_path, is_amd. Compiler
isn't happy because these variables are defined globally in two .c files
but are not declared as extern.
To fix issues for the global variables, declare them as extern.
Chang Log:
- Split this patch from v4's patch 1 (Shuah).
Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Reinette reported following compilation issue on Fedora 32, gcc version
10.1.1
/usr/bin/ld: cqm_test.o:<src_dir>/cqm_test.c:22: multiple definition of
`cache_size'; cat_test.o:<src_dir>/cat_test.c:23: first defined here
The same issue is reported for long_mask, cbm_mask, count_of_bits etc
variables as well. Compiler isn't happy because these variables are
defined globally in two .c files namely cqm_test.c and cat_test.c and
the compiler during compilation finds that the variable is already
defined (multiple definition error).
Taking a closer look at the usage of these variables reveals that these
variables are used only locally in functions such as cqm_resctrl_val()
(defined in cqm_test.c) and cat_perf_miss_val() (defined in cat_test.c).
These variables are not shared between those functions. So, there is no
need for these variables to be global. Hence, fix this issue by making
them static variables.
Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
David reported a buffer overflow error in the check_results() function of
the cmt unit test and he suggested enabling _FORTIFY_SOURCE gcc compiler
option to automatically detect any such errors.
Feature Test Macros man page describes_FORTIFY_SOURCE as below
"Defining this macro causes some lightweight checks to be performed to
detect some buffer overflow errors when employing various string and memory
manipulation functions (for example, memcpy, memset, stpcpy, strcpy,
strncpy, strcat, strncat, sprintf, snprintf, vsprintf, vsnprintf, gets, and
wide character variants thereof). For some functions, argument consistency
is checked; for example, a check is made that open has been supplied with a
mode argument when the specified flags include O_CREAT. Not all problems
are detected, just some common cases.
If _FORTIFY_SOURCE is set to 1, with compiler optimization level 1 (gcc
-O1) and above, checks that shouldn't change the behavior of conforming
programs are performed.
With _FORTIFY_SOURCE set to 2, some more checking is added, but some
conforming programs might fail.
Some of the checks can be performed at compile time (via macros logic
implemented in header files), and result in compiler warnings; other checks
take place at run time, and result in a run-time error if the check fails.
Use of this macro requires compiler support, available with gcc since
version 4.0."
Fix the buffer overflow error in the check_results() function of the cmt
unit test and enable _FORTIFY_SOURCE gcc check to catch any future buffer
overflow errors.
Reported-by: David Binderman <dcb314@hotmail.com>
Suggested-by: David Binderman <dcb314@hotmail.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Alexei Starovoitov says:
====================
pull-request: bpf 2021-04-01
The following pull-request contains BPF updates for your *net* tree.
We've added 11 non-merge commits during the last 8 day(s) which contain
a total of 10 files changed, 151 insertions(+), 26 deletions(-).
The main changes are:
1) xsk creation fixes, from Ciara.
2) bpf_get_task_stack fix, from Dave.
3) trampoline in modules fix, from Jiri.
4) bpf_obj_get fix for links and progs, from Lorenz.
5) struct_ops progs must be gpl compatible fix, from Toke.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull kvm fixes from Paolo Bonzini:
"It's a bit larger than I (and probably you) would like by the time we
get to -rc6, but perhaps not entirely unexpected since the changes in
the last merge window were larger than usual.
x86:
- Fixes for missing TLB flushes with TDP MMU
- Fixes for race conditions in nested SVM
- Fixes for lockdep splat with Xen emulation
- Fix for kvmclock underflow
- Fix srcdir != builddir builds
- Other small cleanups
ARM:
- Fix GICv3 MMIO compatibility probing
- Prevent guests from using the ARMv8.4 self-hosted tracing
extension"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
selftests: kvm: Check that TSC page value is small after KVM_SET_CLOCK(0)
KVM: x86: Prevent 'hv_clock->system_time' from going negative in kvm_guest_time_update()
KVM: x86: disable interrupts while pvclock_gtod_sync_lock is taken
KVM: x86: reduce pvclock_gtod_sync_lock critical sections
KVM: SVM: ensure that EFER.SVME is set when running nested guest or on nested vmexit
KVM: SVM: load control fields from VMCB12 before checking them
KVM: x86/mmu: Don't allow TDP MMU to yield when recovering NX pages
KVM: x86/mmu: Ensure TLBs are flushed for TDP MMU during NX zapping
KVM: x86/mmu: Ensure TLBs are flushed when yielding during GFN range zap
KVM: make: Fix out-of-source module builds
selftests: kvm: make hardware_disable_test less verbose
KVM: x86/vPMU: Forbid writing to MSR_F15H_PERF MSRs when guest doesn't have X86_FEATURE_PERFCTR_CORE
KVM: x86: remove unused declaration of kvm_write_tsc()
KVM: clean up the unused argument
tools/kvm_stat: Add restart delay
KVM: arm64: Fix CPU interface MMIO compatibility detection
KVM: arm64: Disable guest access to trace filter controls
KVM: arm64: Hide system instruction access to Trace registers
Instead of just reporting an assertion failure, report enough information
that we can start diagnosing exactly went wrong.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
The throbber could race with creation of the anchor entry and cause the
IDR to have zero entries in it, which would cause the test to fail.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
When run on a single CPU, this test would frequently access already-freed
memory. Due to timing, this bug never showed up on multi-CPU tests.
Reported-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Several test runners register individual worker threads with the
RCU library, but neglect to register the main thread, which can lead
to objects being freed while the main thread is in what appears to be
an RCU critical section.
Reported-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
