The path did not match the one it was submitted into linux-firmware
which prevented generic distribution from having working CODEC.
Fixes: 9f599f351e ("media: amphion: add vpu core driver")
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Pull media updates from Mauro Carvalho Chehab:
- Lots of improvement at atomisp driver, which is starting to look in
good shape
- Mediatek vcodec driver has gained support for av1 and hevc stateless
codecs
- New sensor driver: ov01a10
- verisilicon driver has gained AV1 entropy helpers
- tegra-video has gained support for Tegra20 parallel input
- dvb core has gained an extra property to better support DVB-S2X
- as usual, lots of cleanups, fixes and improvements on media drivers
* tag 'media/v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (253 commits)
media: wl128x: fix a clang warning
media: dvb: mb86a20s: get rid of a clang-15 warning
media: cec: i2c: ch7322: also select REGMAP
media: add HAS_IOPORT dependencies
media: tc358746: select CONFIG_GENERIC_PHY
media: mediatek: vcodec: Add dbgfs help function
media: mediatek: vcodec: Add encode to support dbgfs
media: mediatek: vcodec: Change dbgfs interface to support encode
media: mediatek: vcodec: Get each instance format type
media: mediatek: vcodec: Get each context resolution information
media: mediatek: vcodec: Add a debugfs file to get different useful information
media: mediatek: vcodec: Add debug params to control different log level
media: mediatek: vcodec: Add debugfs interface to get debug information
media: mediatek: vcodec: support stateless AV1 decoder
media: verisilicon: Conditionally ignore native formats
media: verisilicon: Enable AV1 decoder on rk3588
media: verisilicon: Add film grain feature to AV1 driver
media: verisilicon: Add Rockchip AV1 decoder
media: verisilicon: Add AV1 entropy helpers
media: verisilicon: Compute motion vectors size for AV1 frames
...
The last buffer from before the change must be marked
with the V4L2_BUF_FLAG_LAST flag,
similarly to the Drain sequence above.
initiate a drain of the capture queue in dynamic resolution change
Fixes: 6de8d628df ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
For format V4L2_PIX_FMT_VC1_ANNEX_G,
the separate codec data is required only once.
The repeated codec data may introduce some decoding error.
so drop the repeated codec data.
It's amphion vpu's limitation
Fixes: e670f5d672 ("media: amphion: only insert the first sequence startcode for vc1l format")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Tested-by: xiahong.bao <xiahong.bao@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
For format V4L2_PIX_FMT_VC1_ANNEX_L,
the codec data is replaced with startcode,
and then driver drop it, otherwise it may led to decoding error.
It's amphion vpu's limitation
Driver has dropped the first codec data,
but need to drop the repeated codec data too.
Fixes: e670f5d672 ("media: amphion: only insert the first sequence startcode for vc1l format")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Tested-by: xiahong.bao <xiahong.bao@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
BACKGROUND
==========
When multiple work items are queued to a workqueue, their execution order
doesn't match the queueing order. They may get executed in any order and
simultaneously. When fully serialized execution - one by one in the
queueing order - is needed, an ordered workqueue should be used which can
be created with alloc_ordered_workqueue().
However, alloc_ordered_workqueue() was a later addition. Before it, an
ordered workqueue could be obtained by creating an UNBOUND workqueue with
@max_active==1. This originally was an implementation side-effect which was
broken by 4c16bd327c ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered"). Because there were users that depended on the ordered execution,
5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
made workqueue allocation path to implicitly promote UNBOUND workqueues w/
@max_active==1 to ordered workqueues.
While this has worked okay, overloading the UNBOUND allocation interface
this way creates other issues. It's difficult to tell whether a given
workqueue actually needs to be ordered and users that legitimately want a
min concurrency level wq unexpectedly gets an ordered one instead. With
planned UNBOUND workqueue updates to improve execution locality and more
prevalence of chiplet designs which can benefit from such improvements,
this isn't a state we wanna be in forever.
This patch series audits all callsites that create an UNBOUND workqueue w/
@max_active==1 and converts them to alloc_ordered_workqueue() as necessary.
WHAT TO LOOK FOR
================
The conversions are from
alloc_workqueue(WQ_UNBOUND | flags, 1, args..)
to
alloc_ordered_workqueue(flags, args...)
which don't cause any functional changes. If you know that fully ordered
execution is not necessary, please let me know. I'll drop the conversion
and instead add a comment noting the fact to reduce confusion while
conversion is in progress.
If you aren't fully sure, it's completely fine to let the conversion
through. The behavior will stay exactly the same and we can always
reconsider later.
As there are follow-up workqueue core changes, I'd really appreciate if the
patch can be routed through the workqueue tree w/ your acks. Thanks.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ming Qian <ming.qian@nxp.com>
Cc: Shijie Qin <shijie.qin@nxp.com>
Cc: Zhou Peng <eagle.zhou@nxp.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
amphion decoder add support for the RealVideo video.
RV30 and RV40 are support by amphion decoder.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Sorenson Spark is an implementation of H.263 for use
in Flash Video and Adobe Flash files.
amphion decoder can support it by insert some startcode
before sequence and picture.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
amphion vpu support a low latency mode,
when V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY_ENABLE is enabled,
decoder can display frame immediately after it's decoded.
Only h264 is support yet.
Fixes: 6de8d628df ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
in the E.2.1 of Rec. ITU-T H.264 (06/2019),
0 of colour primaries is reserved, and 2 is unspecified.
driver can map V4L2_COLORSPACE_LAST to 0,
and map V4L2_COLORSPACE_DEFAULT to 2.
v4l2_xfer_func and v4l2_ycbcr_encoding are similar case.
Fixes: 3cd084519c ("media: amphion: add vpu v4l2 m2m support")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
record the colorspace set by user.
if it's not supported by h264 vui, then zero will be written to vui,
but don't modify the user setting.
Fixes: 0401e659c1 ("media: amphion: add v4l2 m2m vpu encoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
driver needs to cancel vpu before releasing the vpu instance,
so call v4l2_m2m_ctx_release() first,
to handle the redundant event triggered after m2m_ctx is released.
lock and check m2m_ctx in the event handler.
Fixes: 3cd084519c ("media: amphion: add vpu v4l2 m2m support")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
firmware should be waked up by start or configure command,
but there is a very small chance that firmware failed to wakeup.
in such case, try to wakeup firmware again by sending a noop command
Fixes: 6de8d628df ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Driver should tell the number of memory planes and component planes.
the amphion vpu support non contiguous planes,
but for compatibility with other device
that only support contiguous planes.
driver can add support for contiguous planes in the same time.
Then the mem_planes can be different from the comp_planes.
driver need to handle buffer according mem_planes and comp_planes.
So driver can support NV12 and NV12M.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
A problem about modprobe amphion-vpu failed is triggered with the
following log given:
[ 2208.634841] Error: Driver 'amphion-vpu' is already registered, aborting...
modprobe: ERROR: could not insert 'amphion_vpu': Device or resource busy
The reason is that vpu_driver_init() returns vpu_core_driver_init()
directly without checking its return value, if vpu_core_driver_init()
failed, it returns without unregister amphion_vpu_driver, resulting the
amphion-vpu can never be installed later.
A simple call graph is shown as below:
vpu_driver_init()
platform_driver_register() # register amphion_vpu_driver
vpu_core_driver_init()
platform_driver_register()
driver_register()
bus_add_driver()
dev = kzalloc(...) # OOM happened
# return without unregister amphion_vpu_driver
Fix by unregister amphion_vpu_driver when vpu_core_driver_init() returns
error.
Fixes: b50a64fc54 ("media: amphion: add amphion vpu device driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: ming_qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
vb2_queue_error is help to set the error of vb2_queue,
don't need to set it manually
Fixes: 3cd084519c ("media: amphion: add vpu v4l2 m2m support")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
the capture format may be changed when
sequence header is parsed,
it may be read and write in the same time,
add lock around vdec_g_fmt to synchronize it
Fixes: 6de8d628df ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
there is hardware limitation that if it's aborted before
the first codec header parsed, the codec may be stalled
unless we do reset codec.
and drop the source change event if it's triggered after reset.
Fixes: 6de8d628df ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
release m2m ctx in the callback function that
release the vpu instance, then there is no need
to add lock around releasing m2m ctx.
Fixes: 3cd084519c ("media: amphion: add vpu v4l2 m2m support")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
driver will enable the vpu core when request the first instance
on the core.
one vpu core can only support 8 streaming instances in the same
time, the instance won't be added to core's list before streamon.
so the actual instance count may be greater then the number in
the core's list.
in pm resume callback, driver will resume the core immediately if
core's list is not empty.
but this check is not accurate,
if suspend during one instance is requested, but not streamon,
then after suspend, the core won't be resume, and led to instance failure.
use the request_count instead of the core's list to check
whether is the core needed to resume immediately after suspend.
And it can make the pm suspend and resume callback more clear.
Fixes: 9f599f351e ("media: amphion: add vpu core driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
decoder will report the colorspace information
which is parsed from the sequence header,
if they are unspecified, just let application to determine it,
don't change it in driver.
Fixes: 6de8d628df ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
adjust the value range of gop size from [0, 65535] to [1, 8000].
when the gop size is set to a too large value,
it may affect the encoded picture quality.
so constrain it to a reasonable range.
Fixes: 0401e659c1 ("media: amphion: add v4l2 m2m vpu encoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
For format vc1, the amphion vpu requires driver to
help insert some custom startcode before sequence and frame.
the startcode is different for vc1l and vc1g format.
But the sequence startcode is only needed at the beginning,
and it's not expected after seek.
driver need to treat the codec header and the first frame after seek
as a normal frame, and insert picture startcode for it.
In previous patch, I just fix it for vc1l format,
and should fix the similar issue for vc1g too.
Fixes: e670f5d672 (media: amphion: only insert the first sequence startcode for vc1l format)
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
For format V4L2_PIX_FMT_VC1_ANNEX_L,
the amphion vpu requires driver to help insert some custom startcode
before sequence and frame.
but only the first sequence startcode is needed,
the extra startcode will cause decoding error.
So after seek, we don't need to insert the sequence startcode.
In other words, for V4L2_PIX_FMT_VC1_ANNEX_L,
the vpu doesn't support dynamic resolution change.
Fixes: 145e936380 ("media: amphion: implement malone decoder rpc interface")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Don't set last_buffer_dequeued during dynamic resolution change,
otherwise it may be cleared in handling resolution change,
as streamoff may be called in dynamic resolution change.
Normally, this does not happen.
But we encounter a special testcase,
User issue V4L2_DEC_CMD_STOP after enqueue one buffer
that only contains codec config header, but not any frame data.
So VPU report the parsed resolution, then report the eos event.
So driver should notify user to handle resolution change first,
after it's handled, set the last_buffer_dequeued.
then the user can exit decoding normally.
Otherwise the user may be stalled.
Fixes: 6de8d628df ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In reset vpu core, driver will wait for a response event,
but if there are still some events unhandled,
they will be handled first, driver may acquire core lock for that.
So if we do reset in core lock, it may led to reset timeout.
Fixes: 9f599f351e ("media: amphion: add vpu core driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Firmware may send the error event with some error message,
and it help locate the firmware error,
so output the error message if it exists
Fixes: 61cbf1c1fa ("media: amphion: implement vpu core communication based on mailbox")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
vfree(NULL) is safe. NULL check before vfree() is not needed.
Delete them to simplify the code.
Generated by coccinelle script:
scripts/coccinelle/free/ifnullfree.cocci
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: ming_qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
return error if format is unsupported by vpu,
otherwise the vpu will be stalled at decoding
Fixes: 3cd084519c ("media: amphion: add vpu v4l2 m2m support")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
vdec check the pixel format is supported by vpu,
or is it disabled.
And don't report it if the result is false
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As there is no interface to power off vpu core.
So it need to boot from cold on first load.
but on the second load, driver need to restore the status
instead of booting.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
G/S_PARM doesn't make sense for the capture queue of a stateful encoder,
unless V4L2_FMT_FLAG_ENC_CAP_FRAME_INTERVAL is set to reserve hardware
resources.
Otherwise it will fail the v4l2-compliance
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
when error occurs, driver set error flag,
and driver need to wake up the poll wait
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
the output buffer count should >= min_buffer_out
the capture buffer count should >= min_buffer_cap
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The typical behavior is to add all controls, then at the end check if
hdl->error was set, and if so, v4l2_ctrl_handler_free is called and
the error is returned.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
For some invalid frames,
especially multiple consecutive invalid frames,
they all can't be decoded,
then the firmware can send picture skipped event
to notify driver that some frames are invalid,
driver can return them with error flag.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
copy the timestamp using the helper function
V4L2_BUF_FLAG_TIMESTAMP_COPY
To implement this, driver will keep the output buffer until it's
encoded, in previous, driver will return the output buffer immediately
after firmware return it
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
copy the timestamp using the helper function
V4L2_BUF_FLAG_TIMESTAMP_COPY
To implement this, driver will keep the output buffer until it's
decoded, in previous, driver will return the output buffer immediately
after copying data to stream buffer.
After that, there is no need to make a workaround for poll function.
driver can use v4l2_m2m_fop_poll directly.
Also, driver don't need to keep a input threshold
as the buffer count is up to only 32.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
For interlaced frame, the amphion vpu will store the
two fields sequential into one buffer, top-bottom order
so the field should be set to V4L2_FIELD_SEQ_TB.
fix the previous bug that set it to V4L2_FIELD_SEQ_BT wrongly.
Fixes: 6de8d628df ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
there is issue that driver forget to
call media_device_cleanup if media_device_register fail,
it will led to memory leak.
Also driver should check the return value of vpu_add_func.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
fix some issues reported by Dan,
1. fix some signedness bug
2. don't use u32 as function return value
3. prevent a divide by zero bug
4. Just return zero on success, don't return a known parameter
5. check the validity of some variables
6. reset buffer state when return buffers
7. make sure the ALIGN won't wrap to zero
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
