- Return error to application when command execution fails because an
out-of-band reset has cleared the device BARs, Memory Space Enable, etc
(Kelvin Cao)
- Fix MRPC error status handling issue (Kelvin Cao)
- Mask out other bits when reading of management VEP instance ID (Kelvin
Cao)
- Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions (Kelvin
Cao)
- Add check of event support (Logan Gunthorpe)
* pci/switchtec:
PCI/switchtec: Add check of event support
PCI/switchtec: Replace ENOTSUPP with EOPNOTSUPP
PCI/switchtec: Update the way of getting management VEP instance ID
PCI/switchtec: Fix a MRPC error status handling issue
PCI/switchtec: Error out MRPC execution when MMIO reads fail
- Drop the struct pci_dev.driver pointer, which is redundant with the
struct device.driver pointer (Uwe Kleine-König)
* pci/driver:
PCI: Remove struct pci_dev->driver
PCI: Use to_pci_driver() instead of pci_dev->driver
x86/pci/probe_roms: Use to_pci_driver() instead of pci_dev->driver
perf/x86/intel/uncore: Use to_pci_driver() instead of pci_dev->driver
powerpc/eeh: Use to_pci_driver() instead of pci_dev->driver
usb: xhci: Use to_pci_driver() instead of pci_dev->driver
cxl: Use to_pci_driver() instead of pci_dev->driver
cxl: Factor out common dev->driver expressions
xen/pcifront: Use to_pci_driver() instead of pci_dev->driver
xen/pcifront: Drop pcifront_common_process() tests of pcidev, pdrv
nfp: use dev_driver_string() instead of pci_dev->driver->name
mlxsw: pci: Use dev_driver_string() instead of pci_dev->driver->name
net: marvell: prestera: use dev_driver_string() instead of pci_dev->driver->name
net: hns3: use dev_driver_string() instead of pci_dev->driver->name
crypto: hisilicon - use dev_driver_string() instead of pci_dev->driver->name
powerpc/eeh: Use dev_driver_string() instead of struct pci_dev->driver->name
ssb: Use dev_driver_string() instead of pci_dev->driver->name
bcma: simplify reference to driver name
crypto: qat - simplify adf_enable_aer()
scsi: message: fusion: Remove unused mpt_pci driver .probe() 'id' parameter
PCI/ERR: Factor out common dev->driver expressions
PCI: Drop pci_device_probe() test of !pci_dev->driver
PCI: Drop pci_device_remove() test of pci_dev->driver
PCI: Return NULL for to_pci_driver(NULL)
- Rename pcibios_add_device() to pcibios_device_add() since it's called
from pci_device_add() (Oliver O'Halloran)
- Don't try to enable AtomicOps on VFs, since they can only be enabled on
the PF (Selvin Xavier)
* pci/enumeration:
PCI: Do not enable AtomicOps on VFs
PCI: Rename pcibios_add_device() to pcibios_device_add()
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes.
Notable core changes are the removal of scsi->tag which caused some
churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: lpfc: Update lpfc version to 14.0.0.3
scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
scsi: lpfc: Fix link down processing to address NULL pointer dereference
scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
scsi: ufs: mediatek: Avoid sched_clock() misuse
scsi: mpt3sas: Make mpt3sas_dev_attrs static
scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
scsi: target: core: Stop using bdevname()
scsi: aha1542: Use memcpy_{from,to}_bvec()
scsi: sr: Add error handling support for add_disk()
scsi: sd: Add error handling support for add_disk()
scsi: target: Perform ALUA group changes in one step
scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
scsi: target: Fix alua_tg_pt_gps_count tracking
scsi: target: Fix ordered tag handling
...
Pull HID updates from Jiri Kosina:
- support for Nintendo Switch Pro Controllers and Joy-Cons (Daniel J.
Ogorchock)
- support for new revision of the NitroKey U2F device firmware (Andrej
Shadura)
- LED handling improvements for Sony Playstation5 controllers (Roderick
Colenbrander)
- support for Apple 2021 Magic Keyboard (Alex Henrie)
- other assorted code cleanups and new device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (41 commits)
HID: nintendo: fix -Werror build
HID: playstation: require multicolor LED functionality
HID: u2fzero: properly handle timeouts in usb_submit_urb
HID: u2fzero: clarify error check and length calculations
HID: u2fzero: Support NitroKey U2F revision of the device
HID: wacom: Make use of the helper function devm_add_action_or_reset()
HID: wacom: Shrink critical section in `wacom_add_shared_data`
HID: nintendo: prevent needless queueing of the rumble worker
HID: nintendo: ratelimit subcommands and rumble
HID: nintendo: improve rumble performance and stability
HID: nintendo: add IMU support
HID: nintendo: add support for reading user calibration
HID: nintendo: add support for charging grip
HID: nintendo: set controller uniq to MAC
HID: nintendo: reduce device removal subcommand errors
HID: nintendo: patch hw version for userspace HID mappings
HID: nintendo: send subcommands after receiving input report
HID: nintendo: improve subcommand reliability
HID: nintendo: add rumble support
HID: nintendo: add home led support
...
Pull pin control updates from Linus Walleij:
"The most interesting aspect is that we now have initial support for
the Apple pin controller as used in the M1 laptops and the iPhones
which is a step forward for using Linux efficiently on this Apple
silicon.
Core changes:
- Add infrastructure for per-parent interrupt data to support the
Apple pin controller.
New drivers:
- New combined pin control and GPIO driver for the Apple SoC. This is
used in all modern Apple silicon such as the M1 laptops but also in
at least recent iPhone variants.
- New subdriver for the Qualcomm SM6350
- New subdriver for the Qualcomm QCM2290
- New subdriver for the Qualcomm PM6350
- New subdriver for the Uniphier NX1
- New subdriver for the Samsung ExynosAutoV9
- New subdriver for the Mediatek MT7986
- New subdriver for the nVidia Tegra194
Improvements:
- Improve power management in the Mediatek driver.
- Improvements to the Renesas internal consistency checker.
- Convert the Rockchip pin control device tree bindings to YAML.
- Finally convert the Qualcomm PMIC SSBI and SPMI MPP GPIO driver to
use hierarchical interrupts.
- Convert the Qualcomm PMIC MPP device tree bindings to YAML"
* tag 'pinctrl-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (55 commits)
pinctrl: add pinctrl/GPIO driver for Apple SoCs
dt-bindings: pinctrl: Add apple,npins property to apple,pinctrl
dt-bindings: pinctrl: add #interrupt-cells to apple,pinctrl
gpio: Allow per-parent interrupt data
pinctrl: tegra: Fix warnings and error
pinctrl: intel: Kconfig: Add configuration menu to Intel pin control
pinctrl: tegra: Use correct offset for pin group
pinctrl: core: fix possible memory leak in pinctrl_enable()
pinctrl: bcm2835: Allow building driver as a module
pinctrl: equilibrium: Fix function addition in multiple groups
pinctrl: tegra: Add pinmux support for Tegra194
pinctrl: tegra: include lpdr pin properties
pinctrl: mediatek: add support for MT7986 SoC
dt-bindings: pinctrl: update bindings for MT7986 SoC
pinctrl: microchip sgpio: use reset driver
dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add reset binding
dt-bindings: pinctrl: qcom,pmic-mpp: switch to #interrupt-cells
pinctrl: qcom: spmi-mpp: add support for hierarchical IRQ chip
pinctrl: qcom: spmi-mpp: hardcode IRQ counts
pinctrl: qcom: ssbi-mpp: add support for hierarchical IRQ chip
...
This update adds new regmap to support the latest EA silicon
which will be selected based on the chip and variant
information read from the device.
Signed-off-by: Carlos de Paula <me@carlosedp.com>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
At least some implementations sleep. So mark pwm_apply_state() with a
might_sleep() to make callers aware. In the worst case this uncovers a
valid atomic user, then we revert this patch and at least gained some more
knowledge and then can work on a concept similar to
gpio_get_value/gpio_get_value_cansleep.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The normal implementations of these functions make use of mutexes. To
make it obvious that these functions might sleep also add annotations to
the dummy implementations in the !CONFIG_PWM case.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The huge page functionality in TTM does not work safely because PUD and
PMD entries do not have a special bit.
get_user_pages_fast() considers any page that passed pmd_huge() as
usable:
if (unlikely(pmd_trans_huge(pmd) || pmd_huge(pmd) ||
pmd_devmap(pmd))) {
And vmf_insert_pfn_pmd_prot() unconditionally sets
entry = pmd_mkhuge(pfn_t_pmd(pfn, prot));
eg on x86 the page will be _PAGE_PRESENT | PAGE_PSE.
As such gup_huge_pmd() will try to deref a struct page:
head = try_grab_compound_head(pmd_page(orig), refs, flags);
and thus crash.
Thomas further notices that the drivers are not expecting the struct page
to be used by anything - in particular the refcount incr above will cause
them to malfunction.
Thus everything about this is not able to fully work correctly considering
GUP_fast. Delete it entirely. It can return someday along with a proper
PMD/PUD_SPECIAL bit in the page table itself to gate GUP_fast.
Fixes: 314b6580ad ("drm/ttm, drm/vmwgfx: Support huge TTM pagefaults")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Thomas Hellström <thomas.helllstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
[danvet: Update subject per Thomas' &Christian's review]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/0-v2-a44694790652+4ac-ttm_pmd_jgg@nvidia.com
This reverts commit 2d9ea39917.
We've got a regression report showing that the audio got broken the
device over AMD IOMMU. The conversion assumed the wrong pointer /
page mapping for the indirect mapping case, and we need to correct
this urgently, so let's revert it for now.
Fixes: 2d9ea39917 ("ALSA: memalloc: Convert x86 SG-buffer handling with non-contiguous type")
Reported-and-tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Link: https://lore.kernel.org/r/20211104180846.16340-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull power supply and reset updates from Sebastian Reichel:
"Miscellaneous small fixes and improvements all over the place.
Nothing stands out in particular"
* tag 'for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (30 commits)
power: supply: bq25890: Fix initial setting of the F_CONV_RATE field
power: supply: bq25890: Fix race causing oops at boot
power: supply: bq27xxx: Fix kernel crash on IRQ handler register error
power: bq25890: add return values to error messages
power: supply: axp288-charger: Simplify axp288_get_charger_health()
power: supply: axp288-charger: Remove unnecessary is_present and is_online helpers
power: supply: axp288-charger: Add depends on IOSF_MBIO to Kconfig
power: supply: ab8500_bmdata: Use standard phandle
dt-bindings: power: supply: ab8500: Standard monitored-battery
power: supply: axp288_charger: Fix missing mutex_init()
power: supply: max17042_battery: Prevent int underflow in set_soc_threshold
power: supply: max17042_battery: Clear status bits in interrupt handler
MAINTAINERS: power: supply: max17040: add entry with reviewers
MAINTAINERS: power: supply: max17042: add entry with reviewers
power: supply: max17040: fix null-ptr-deref in max17040_probe()
power: supply: rt5033_battery: Change voltage values to µV
power: supply: axp288-charger: Optimize register reading method
dt-bindings: power: Bindings for Samsung batteries
power: supply: cpcap-battery: use device_get_match_data() to simplify code
power: supply: max17042_battery: fix typo in MAX17042_IAvg_empty
...
Pull iommu updates from Joerg Roedel:
- Intel IOMMU Updates fro Lu Baolu:
- Dump DMAR translation structure when DMA fault occurs
- An optimization in the page table manipulation code
- Use second level for GPA->HPA translation
- Various cleanups
- Arm SMMU Updates from Will
- Minor optimisations to SMMUv3 command creation and submission
- Numerous new compatible string for Qualcomm SMMUv2 implementations
- Fixes for the SWIOTLB based implemenation of dma-iommu code for
untrusted devices
- Add support for r8a779a0 to the Renesas IOMMU driver and DT matching
code for r8a77980
- A couple of cleanups and fixes for the Apple DART IOMMU driver
- Make use of generic report_iommu_fault() interface in the AMD IOMMU
driver
- Various smaller fixes and cleanups
* tag 'iommu-updates-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (35 commits)
iommu/dma: Fix incorrect error return on iommu deferred attach
iommu/dart: Initialize DART_STREAMS_ENABLE
iommu/dma: Use kvcalloc() instead of kvzalloc()
iommu/tegra-smmu: Use devm_bitmap_zalloc when applicable
iommu/dart: Use kmemdup instead of kzalloc and memcpy
iommu/vt-d: Avoid duplicate removing in __domain_mapping()
iommu/vt-d: Convert the return type of first_pte_in_page to bool
iommu/vt-d: Clean up unused PASID updating functions
iommu/vt-d: Delete dev_has_feat callback
iommu/vt-d: Use second level for GPA->HPA translation
iommu/vt-d: Check FL and SL capability sanity in scalable mode
iommu/vt-d: Remove duplicate identity domain flag
iommu/vt-d: Dump DMAR translation structure when DMA fault occurs
iommu/vt-d: Do not falsely log intel_iommu is unsupported kernel option
iommu/arm-smmu-qcom: Request direct mapping for modem device
iommu: arm-smmu-qcom: Add compatible for QCM2290
dt-bindings: arm-smmu: Add compatible for QCM2290 SoC
iommu/arm-smmu-qcom: Add SM6350 SMMU compatible
dt-bindings: arm-smmu: Add compatible for SM6350 SoC
iommu/arm-smmu-v3: Properly handle the return value of arm_smmu_cmdq_build_cmd()
...
alloc_xenballooned_pages() and free_xenballooned_pages() are used as
direct replacements of xen_alloc_unpopulated_pages() and
xen_free_unpopulated_pages() in case CONFIG_XEN_UNPOPULATED_ALLOC isn't
defined.
Guard both functions with !CONFIG_XEN_UNPOPULATED_ALLOC and rename them
to the xen_*() variants they are replacing. This allows to remove some
ifdeffery from the xen.h header file. Adapt the prototype of the
functions to match.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20211102092234.17852-1-jgross@suse.com
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Pull tty / serial driver updates from Greg KH:
"Here is the big set of tty and serial driver updates for 5.16-rc1.
Nothing major in here at all, just lots of tiny serial and tty driver
updates for various reported things, and some good cleanups. These
include:
- more good tty api cleanups from Jiri
- stm32 serial driver updates
- softlockup fix for non-preempt systems under high serial load
- rpmsg serial driver update
- 8250 drivers updates and fixes
- n_gsm line discipline fixes and updates as people are finally
starting to use it.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'tty-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (86 commits)
tty: Fix extra "not" in TTY_DRIVER_REAL_RAW description
serial: cpm_uart: Protect udbg definitions by CONFIG_SERIAL_CPM_CONSOLE
tty: rpmsg: Define tty name via constant string literal
tty: rpmsg: Add pr_fmt() to prefix messages
tty: rpmsg: Use dev_err_probe() in ->probe()
tty: rpmsg: Unify variable used to keep an error code
tty: rpmsg: Assign returned id to a local variable
serial: stm32: push DMA RX data before suspending
serial: stm32: terminate / restart DMA transfer at suspend / resume
serial: stm32: rework RX dma initialization and release
serial: 8250_pci: Remove empty stub pci_quatech_exit()
serial: 8250_pci: Replace custom pci_match_id() implementation
serial: xilinx_uartps: Fix race condition causing stuck TX
serial: sunzilog: Mark sunzilog_putchar() __maybe_unused
Revert "tty: hvc: pass DMA capable memory to put_chars()"
Revert "virtio-console: remove unnecessary kmemdup()"
serial: 8250_pci: Replace dev_*() by pci_*() macros
serial: 8250_pci: Get rid of redundant 'else' keyword
serial: 8250_pci: Refactor the loop in pci_ite887x_init()
tty: add rpmsg driver
...
Declaring the struct packed here is mostly harmless,
but gives a bad example for people to copy.
As the struct is packed and aligned manually,
let's just drop the attribute.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
This patch adds IRQ support for the virtio GPIO driver. Note that this
uses the irq_bus_lock/unlock() callbacks, since those operations over
virtio may sleep.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 5.16-rc1.
All of these have been in linux-next for a while now with no reported
problems.
Included in here are:
- big update and cleanup of the sysfs abi documentation files and
scripts from Mauro. We are almost at the place where we can
properly check that the running kernel's sysfs abi is documented
fully.
- firmware loader updates
- dyndbg updates
- kernfs cleanups and fixes from Christoph
- device property updates
- component fix
- other minor driver core cleanups and fixes"
* tag 'driver-core-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (122 commits)
device property: Drop redundant NULL checks
x86/build: Tuck away built-in firmware under FW_LOADER
vmlinux.lds.h: wrap built-in firmware support under FW_LOADER
firmware_loader: move struct builtin_fw to the only place used
x86/microcode: Use the firmware_loader built-in API
firmware_loader: remove old DECLARE_BUILTIN_FIRMWARE()
firmware_loader: formalize built-in firmware API
component: do not leave master devres group open after bind
dyndbg: refine verbosity 1-4 summary-detail
gpiolib: acpi: Replace custom code with device_match_acpi_handle()
i2c: acpi: Replace custom function with device_match_acpi_handle()
driver core: Provide device_match_acpi_handle() helper
dyndbg: fix spurious vNpr_info change
dyndbg: no vpr-info on empty queries
dyndbg: vpr-info on remove-module complete, not starting
device property: Add missed header in fwnode.h
Documentation: dyndbg: Improve cli param examples
dyndbg: Remove support for ddebug_query param
dyndbg: make dyndbg a known cli param
dyndbg: show module in vpr-info in dd-exec-queries
...
Pull char/misc driver updates from Greg KH:
"Here is the big set of char and misc and other tiny driver subsystem
updates for 5.16-rc1.
Loads of things in here, all of which have been in linux-next for a
while with no reported problems (except for one called out below.)
Included are:
- habanana labs driver updates, including dma_buf usage, reviewed and
acked by the dma_buf maintainers
- iio driver update (going through this tree not staging as they
really do not belong going through that tree anymore)
- counter driver updates
- hwmon driver updates that the counter drivers needed, acked by the
hwmon maintainer
- xillybus driver updates
- binder driver updates
- extcon driver updates
- dma_buf module namespaces added (will cause a build error in arm64
for allmodconfig, but that change is on its way through the drm
tree)
- lkdtm driver updates
- pvpanic driver updates
- phy driver updates
- virt acrn and nitr_enclaves driver updates
- smaller char and misc driver updates"
* tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (386 commits)
comedi: dt9812: fix DMA buffers on stack
comedi: ni_usb6501: fix NULL-deref in command paths
arm64: errata: Enable TRBE workaround for write to out-of-range address
arm64: errata: Enable workaround for TRBE overwrite in FILL mode
coresight: trbe: Work around write to out of range
coresight: trbe: Make sure we have enough space
coresight: trbe: Add a helper to determine the minimum buffer size
coresight: trbe: Workaround TRBE errata overwrite in FILL mode
coresight: trbe: Add infrastructure for Errata handling
coresight: trbe: Allow driver to choose a different alignment
coresight: trbe: Decouple buffer base from the hardware base
coresight: trbe: Add a helper to pad a given buffer area
coresight: trbe: Add a helper to calculate the trace generated
coresight: trbe: Defer the probe on offline CPUs
coresight: trbe: Fix incorrect access of the sink specific data
coresight: etm4x: Add ETM PID for Kryo-5XX
coresight: trbe: Prohibit trace before disabling TRBE
coresight: trbe: End the AUX handle on truncation
coresight: trbe: Do not truncate buffer on IRQ
coresight: trbe: Fix handling of spurious interrupts
...
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
5.16-rc1.
Nothing major in here, just lots of little cleanups and additions for
new hardware, all of which have been in linux-next for a while with no
reported problems.
Included in here are:
- tiny Thunderbolt driver updates
- USB typec driver updates
- USB serial driver updates
- USB gadget driver updates
- dwc2 and dwc3 controller driver updates
- tiny USB host driver updates
- minor USB driver fixes and updates
- USB dts updates for various platforms"
* tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (123 commits)
usb: gadget: Mark USB_FSL_QE broken on 64-bit
usb: gadget: f_mass_storage: Disable eps during disconnect
usb: gadget: udc: core: Revise comments for USB ep enable/disable
USB: serial: keyspan: fix memleak on probe errors
USB: serial: cp210x: use usb_control_msg_recv() and usb_control_msg_send()
USB: serial: ch314: use usb_control_msg_recv()
USB: iowarrior: fix control-message timeouts
Documentation: USB: fix example bulk-message timeout
usb: dwc2: stm32mp15: set otg_rev
usb: dwc2: add otg_rev and otg_caps information for gadget driver
dt-bindings: usb: dwc2: adopt otg properties defined in usb-drd.yaml
dt-bindings: usb: dwc2: Add reference to usb-drd.yaml
usb: gadget: uvc: implement dwPresentationTime and scrSourceClock
usb: gadget: uvc: use on returned header len in video_encode_isoc_sg
usb:gadget: f_uac1: fixed sync playback
Docs: usb: remove :c:func: for usb_register and usb_deregister
Docs: usb: update struct usb_driver
usb: gadget: configfs: change config attributes file operation
usb: gadget: configfs: add cfg_to_gadget_info() helper
usb: dwc3: Align DWC3_EP_* flag macros
...
Pull clk updates from Stephen Boyd:
"The usual collection of clk driver updates and new driver additions.
In terms of lines it's mainly Qualcomm and Mediatek code, supporting
various SoCs and their multitude of clk controllers.
New Drivers:
- GCC and RPMcc support for Qualcomm QCM2290 SoCs
- GCC support for Qualcomm MSM8994/MSM8992 SoCs
- LPASSCC and CAMCC support for Qualcomm SC7280 SoCs
- Support for Mediatek MT8195 SoCs
- Initial clock driver for the Exynos850 SoC
- Add i.MX8ULP clock driver and related bindings
Updates:
- Clock power management for new SAMA7G5 SoC
- Updates to the master clock driver and sam9x60-pll to be able to
use cpufreq-dt driver and avoid overclocking of CPU and MCK0
domains while changing the frequency via DVFS
- Use ARRAY_SIZE in qcom clk drivers
- Remove some impractical fallback parent names in qcom clk drivers
- Make Mediatek clk drivers tristate
- Refactoring of the CPU clock code and conversion of Samsung
Exynos5433 CPU clock driver to the platform driver
- A few conversions to devm_platform_ioremap_resource()
- Updates of the Samsung Kconfig help text
- Update video path realted clocks for Amlogic meson8
- Add SPI Multi I/O Bus and SDHI clocks and resets on Renesas RZ/G2L
- Add SPI Multi I/O Bus (RPC) clocks on Renesas R-Car V3U
- Add MediaLB clocks on Renesas R-Car H3, M3-W/W+, and M3-N
- Remove unused helpers from i.MX specific clock header
- Rework all i.MX clk based helpers to use clk_hw based ones
- Rework i.MX gate/mux/divider wrappers
- Rework imx_clk_hw_composite and imx_clk_hw_pll14xx wrappers
- Update i.MX pllv4 and composite clocks to support i.MX8ULP
- Disable i.MX7ULP composite clock during initialization
- Add CLK_SET_RATE_NO_REPARENT flag to the i.MX7ULP composite
- Disable the i.MX pfd when set pfdv2 clock rate
- Add support for i.MX8ULP in pfdv2
- Add the pcc reset controller support on i.MX8ULP
- Fix the build break when clk-imx8ulp is built as module
- Move csi_sel mux to correct base register in i.MX6UL clock drivr
- Fix csi clk gate register in i.MX6UL clock driver
- Fix build bug making CLK_IMX8ULP select MXC_CLK
- Add TPU (PWM), and Z (Cortex-A76) clocks on Renesas R-Car V3U
- Add Ethernet clocks on Renesas RZ/G2L
- Move Rockchip to use module_platform_probe
- Enable usage of Coresight related clocks on Rockchip rk3399"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (170 commits)
clk: use clk_core_get_rate_recalc() in clk_rate_get()
clk: at91: sama7g5: set low limit for mck0 at 32KHz
clk: at91: sama7g5: remove prescaler part of master clock
clk: at91: clk-master: add notifier for divider
clk: at91: clk-sam9x60-pll: add notifier for div part of PLL
clk: at91: clk-master: fix prescaler logic
clk: at91: clk-master: mask mckr against layout->mask
clk: at91: clk-master: check if div or pres is zero
clk: at91: sam9x60-pll: use DIV_ROUND_CLOSEST_ULL
clk: at91: pmc: add sama7g5 to the list of available pmcs
clk: at91: clk-master: improve readability by using local variables
clk: at91: clk-master: add register definition for sama7g5's master clock
clk: at91: sama7g5: add securam's peripheral clock
clk: at91: pmc: execute suspend/resume only for backup mode
clk: at91: re-factor clocks suspend/resume
clk: ux500: Add driver for the reset portions of PRCC
dt-bindings: clock: u8500: Rewrite in YAML and extend
clk: composite: Use rate_ops.determine_rate when also a mux is available
clk: samsung: describe drivers in Kconfig
clk: samsung: exynos5433: update apollo and atlas clock probing
...
The changes to issue the abort from the scmd->abort_work instead of the EH
thread introduced a problem if eh_deadline is used. If aborting the
command(s) is successful, and there are never any scmds added to the
shost->eh_cmd_q, there is no code path which will reset the ->last_reset
value back to zero.
The effect of this is that after a successful abort with no EH thread
activity, a subsequent timeout, perhaps a long time later, might
immediately be considered past a user-set eh_deadline time, and the host
will be reset with no attempt at recovery.
Fix this by resetting ->last_reset back to zero in scmd_eh_abort_handler()
if it is determined that the EH thread will not run to do this.
Thanks to Gopinath Marappan for investigating this problem.
Link: https://lore.kernel.org/r/20211029194311.17504-2-emilne@redhat.com
Fixes: e494f6a728 ("[SCSI] improved eh timeout handler")
Cc: stable@vger.kernel.org
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull ARM SoC driver updates from Arnd Bergmann:
"These are all the driver updates for SoC specific drivers. There are a
couple of subsystems with individual maintainers picking up their
patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this tree this
time. There are only minor changes, but they depend on other tegra
driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process. This
depends on a small sound driver change that is included here as
well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains a
mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for the
"Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed BMCs,
something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better
suspend/resume support"
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
layerscape, allwinner, broadcom, and omap"
* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
optee: Fix spelling mistake "reclain" -> "reclaim"
Revert "firmware: qcom: scm: Add support for MC boot address API"
qcom: spm: allow compile-testing
firmware: arm_ffa: Remove unused 'compat_version' variable
soc: samsung: exynos-chipid: add exynosautov9 SoC support
firmware: qcom: scm: Don't break compile test on non-ARM platforms
soc: qcom: smp2p: Add of_node_put() before goto
soc: qcom: apr: Add of_node_put() before return
soc: qcom: qcom_stats: Fix client votes offset
soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
firmware: qcom: scm: Add support for MC boot address API
soc: qcom: spm: Add 8916 SPM register data
dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
soc: qcom: socinfo: Add PM8150C and SMB2351 models
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
soc: aspeed: Add UART routing support
soc: fsl: dpio: rename the enqueue descriptor variable
soc: fsl: dpio: use an explicit NULL instead of 0
...
Pull ARM SoC DT updates from Arnd Bergmann:
"This is a rather large update for the ARM devicetree files, after a
few quieter releases, with 775 total commits and 47 branches pulled
into this one.
There are 5 new SoC types plus some minor variations, and a total of
60 new machines, so I'm limiting the summary to the main noteworthy
items:
- Apple M1 gain support for PCI and pinctrl, getting a bit closer to
a usable system out of the box.
- Qualcomm gains support for Snapdragon 690 (aka SM6350) as well as
SM7225, 11 new smartphones, and three additional Chromebooks, and
improvements all over the place.
- Samsung gains support for ExynosAutov9, an automotive version of
their smartphone SoC, but otherwise no major changes.
- Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a number
of improvements for the recently added SAMA7 family. The LAN966 SoC
that was added in the platform code does not have dts files yet.
Two board files are added for the older at91sam9g20 SoC
- Aspeed supports two additional server boards using their AST2600 as
BMC, and improves support for qemu models
- Rockchip RK3566/RK3688 gets added, along with six new development
boards using RK3328/RK3399/RK3566, and one Chromebook tablet.
- Two NAS boxes are added using the ARMv4 based Gemini platform
- One new board is added to the Intel Arria SoC FPGA family
- Marvell adds one network switch based on Armada 381 and the new
MOCHAbin 7040 development board
- NXP adds support for the S32G2 automotive SoC, two imx6 based ebook
readers, and three additional development boards, which is notably
less than their usual additions, but they also gain improvements to
their many existing boards
- STmicroelectronics adds their stm32mp13 SoC family along with a
reference board
- Renesas adds new versions of their R-Car Gen3 SoCs and many updates
for their older generations
- Broadcom adds support for a number of Cisco Meraki wireless
controllers, along with two new boards and other updates for
BCM53xx/BCM47xx networking SoCs and the Raspberry Pi boards
- Mediatek improves support for the MT81xx SoCs used in Chromebooks
as well as the MT76xx networking SoCs
- NVIDIA adds a number of cleanups and additional support for more
hardware on the already supported machines
- TI K3 adds support for three new boards along with cleanups
- Toshiba adds one board for the Visconti family
- Xilinx adds five new ZynqMP based machines
- Amlogic support is added for the Radxa Zero and two Jethub home
automation controllers, along with changes to other machines
- Rob Herring continues his work on fixing dtc warnings all over the
tree.
- Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon,
Ux500, Unisoc"
* tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (720 commits)
arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address
arm64: dts: apple: t8103: Add root port interrupt routing
arm64: dts: apple: t8103: Add PCIe DARTs
arm64: apple: Add PCIe node
arm64: apple: Add pinctrl nodes
ARM: dts: arm: Update ICST clock nodes 'reg' and node names
ARM: dts: arm: Update register-bit-led nodes 'reg' and node names
arm64: dts: exynos: add chipid node for exynosautov9 SoC
ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node
Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors"
arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node
arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property
arm64: dts: qcom: sm8350: Add CPU topology and idle-states
arm64: dts: qcom: Drop unneeded extra device-specific includes
arm64: dts: qcom: msm8916: Drop standalone smem node
arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes
arm64: dts: qcom: msm8916-asus-z00l: Add sensors
arm64: dts: qcom: msm8916-asus-z00l: Add SDCard
arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen
arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node
...
Pull virtio updates from Michael Tsirkin:
"vhost and virtio fixes and features:
- Hardening work by Jason
- vdpa driver for Alibaba ENI
- Performance tweaks for virtio blk
- virtio rng rework using an internal buffer
- mac/mtu programming for mlx5 vdpa
- Misc fixes, cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (45 commits)
vdpa/mlx5: Forward only packets with allowed MAC address
vdpa/mlx5: Support configuration of MAC
vdpa/mlx5: Fix clearing of VIRTIO_NET_F_MAC feature bit
vdpa_sim_net: Enable user to set mac address and mtu
vdpa: Enable user to set mac and mtu of vdpa device
vdpa: Use kernel coding style for structure comments
vdpa: Introduce query of device config layout
vdpa: Introduce and use vdpa device get, set config helpers
virtio-scsi: don't let virtio core to validate used buffer length
virtio-blk: don't let virtio core to validate used length
virtio-net: don't let virtio core to validate used length
virtio_ring: validate used buffer length
virtio_blk: correct types for status handling
virtio_blk: allow 0 as num_request_queues
i2c: virtio: Add support for zero-length requests
virtio-blk: fixup coccinelle warnings
virtio_ring: fix typos in vring_desc_extra
virtio-pci: harden INTX interrupts
virtio_pci: harden MSI-X interrupts
virtio_config: introduce a new .enable_cbs method
...
Pull VFIO updates from Alex Williamson:
- Cleanup vfio iommu_group creation (Christoph Hellwig)
- Add individual device reset for vfio/fsl-mc (Diana Craciun)
- IGD OpRegion 2.0+ support (Colin Xu)
- Use modern cdev lifecycle for vfio_group (Jason Gunthorpe)
- Use new mdev API in vfio_ccw (Jason Gunthorpe)
* tag 'vfio-v5.16-rc1' of git://github.com/awilliam/linux-vfio: (27 commits)
vfio/ccw: Convert to use vfio_register_emulated_iommu_dev()
vfio/ccw: Pass vfio_ccw_private not mdev_device to various functions
vfio/ccw: Use functions for alloc/free of the vfio_ccw_private
vfio/ccw: Remove unneeded GFP_DMA
vfio: Use cdev_device_add() instead of device_create()
vfio: Use a refcount_t instead of a kref in the vfio_group
vfio: Don't leak a group reference if the group already exists
vfio: Do not open code the group list search in vfio_create_group()
vfio: Delete vfio_get/put_group from vfio_iommu_group_notifier()
vfio/pci: Add OpRegion 2.0+ Extended VBT support.
vfio/iommu_type1: remove IS_IOMMU_CAP_DOMAIN_IN_CONTAINER
vfio/iommu_type1: remove the "external" domain
vfio/iommu_type1: initialize pgsize_bitmap in ->open
vfio/spapr_tce: reject mediated devices
vfio: clean up the check for mediated device in vfio_iommu_type1
vfio: remove the unused mdev iommu hook
vfio: move the vfio_iommu_driver_ops interface out of <linux/vfio.h>
vfio: remove unused method from vfio_iommu_driver_ops
vfio: simplify iommu group allocation for mediated devices
vfio: remove the iommudata hack for noiommu groups
...
Pull per signal_struct coredumps from Eric Biederman:
"Current coredumps are mixed up with the exit code, the signal handling
code, and the ptrace code making coredumps much more complicated than
necessary and difficult to follow.
This series of changes starts with ptrace_stop and cleans it up,
making it easier to follow what is happening in ptrace_stop. Then
cleans up the exec interactions with coredumps. Then cleans up the
coredump interactions with exit. Finally the coredump interactions
with the signal handling code is cleaned up.
The first and last changes are bug fixes for minor bugs.
I believe the fact that vfork followed by execve can kill the process
the called vfork if exec fails is sufficient justification to change
the userspace visible behavior.
In previous discussions some of these changes were organized
differently and individually appeared to make the code base worse. As
currently written I believe they all stand on their own as cleanups
and bug fixes.
Which means that even if the worst should happen and the last change
needs to be reverted for some unimaginable reason, the code base will
still be improved.
If the worst does not happen there are a more cleanups that can be
made. Signals that generate coredumps can easily become eligible for
short circuit delivery in complete_signal. The entire rendezvous for
generating a coredump can move into get_signal. The function
force_sig_info_to_task be written in a way that does not modify the
signal handling state of the target task (because coredumps are
eligible for short circuit delivery). Many of these future cleanups
can be done another way but nothing so cleanly as if coredumps become
per signal_struct"
* 'per_signal_struct_coredumps-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
coredump: Limit coredumps to a single thread group
coredump: Don't perform any cleanups before dumping core
exit: Factor coredump_exit_mm out of exit_mm
exec: Check for a pending fatal signal instead of core_state
ptrace: Remove the unnecessary arguments from arch_ptrace_stop
signal: Remove the bogus sigkill_pending in ptrace_stop
As Andy pointed out that there are races between
force_sig_info_to_task and sigaction[1] when force_sig_info_task. As
Kees discovered[2] ptrace is also able to change these signals.
In the case of seeccomp killing a process with a signal it is a
security violation to allow the signal to be caught or manipulated.
Solve this problem by introducing a new flag SA_IMMUTABLE that
prevents sigaction and ptrace from modifying these forced signals.
This flag is carefully made kernel internal so that no new ABI is
introduced.
Longer term I think this can be solved by guaranteeing short circuit
delivery of signals in this case. Unfortunately reliable and
guaranteed short circuit delivery of these signals is still a ways off
from being implemented, tested, and merged. So I have implemented a much
simpler alternative for now.
[1] https://lkml.kernel.org/r/b5d52d25-7bde-4030-a7b1-7c6f8ab90660@www.fastmail.com
[2] https://lkml.kernel.org/r/202110281136.5CE65399A7@keescook
Cc: stable@vger.kernel.org
Fixes: 307d522f5e ("signal/seccomp: Refactor seccomp signal and coredump generation")
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
When building m68k:allmodconfig, recent versions of gcc generate the
following error if the length of UTS_RELEASE is less than 8 bytes.
In function 'memcpy_and_pad',
inlined from 'nvmet_execute_disc_identify' at
drivers/nvme/target/discovery.c:268:2: arch/m68k/include/asm/string.h:72:25: error:
'__builtin_memcpy' reading 8 bytes from a region of size 7
Discussions around the problem suggest that this only happens if an
architecture does not provide strlen(), if -ffreestanding is provided as
compiler option, and if CONFIG_FORTIFY_SOURCE=n. All of this is the case
for m68k. The exact reasons are unknown, but seem to be related to the
ability of the compiler to evaluate the return value of strlen() and
the resulting execution flow in memcpy_and_pad(). It would be possible
to work around the problem by using sizeof(UTS_RELEASE) instead of
strlen(UTS_RELEASE), but that would only postpone the problem until the
function is called in a similar way. Uninline memcpy_and_pad() instead
to solve the problem for good.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a convenience function to tell whether a device is in D0 state,
primarily for use in drivers' probe or remove functions on busses where
the custom is to power on the device for the duration of both.
Returns false on non-ACPI systems.
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Enable drivers to tell ACPI that there's no need to power on a device for
probe. Drivers should still perform this by themselves if there's a need
to. In some cases powering on the device during probe is undesirable, and
this change enables a driver to choose what fits best for it.
Add a field called "flags" into struct i2c_driver for driver flags, and a
flag I2C_DRV_ACPI_WAIVE_D0_PROBE to tell a driver supports probe in ACPI D
states other than 0.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Store a device's desired enumeration power state in struct
acpi_device_power during acpi_device object's initialisation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull rdma updates from Jason Gunthorpe:
"A typical collection of patches this cycle, mostly fixing with a few
new features:
- Fixes from static tools. clang warnings, dead code, unused
variable, coccinelle sweeps, etc
- Driver bug fixes and minor improvements in rxe, bnxt_re, hfi1,
mlx5, irdma, qedr
- rtrs ULP bug fixes an improvments
- Additional counters for bnxt_re
- Support verbs CQ notifications in EFA
- Continued reworking and fixing of rxe
- netlink control to enable/disable optional device counters
- rxe now can use AH objects for its UD path, fixing various bugs in
the process
- Add DMABUF support to EFA"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (103 commits)
RDMA/core: Require the driver to set the IOVA correctly during rereg_mr
RDMA/bnxt_re: Remove unsupported bnxt_re_modify_ah callback
RDMA/irdma: optimize rx path by removing unnecessary copy
RDMA/qed: Use helper function to set GUIDs
RDMA/hns: Use the core code to manage the fixed mmap entries
IB/opa_vnic: Rebranding of OPA VNIC driver to Cornelis Networks
IB/qib: Rebranding of qib driver to Cornelis Networks
IB/hfi1: Rebranding of hfi1 driver to Cornelis Networks
RDMA/bnxt_re: Use helper function to set GUIDs
RDMA/bnxt_re: Fix kernel panic when trying to access bnxt_re_stat_descs
RDMA/qedr: Fix NULL deref for query_qp on the GSI QP
RDMA/hns: Modify the value of MAX_LP_MSG_LEN to meet hardware compatibility
RDMA/hns: Fix initial arm_st of CQ
RDMA/rxe: Make rxe_type_info static const
RDMA/rxe: Use 'bitmap_zalloc()' when applicable
RDMA/rxe: Save a few bytes from struct rxe_pool
RDMA/irdma: Remove the unused variable local_qp
RDMA/core: Fix missed initialization of rdma_hw_stats::lock
RDMA/efa: Add support for dmabuf memory regions
RDMA/umem: Allow pinned dmabuf umem usage
...
Pull sound updates from Takashi Iwai:
"Lots of code development have been see in ASoC side as usual, while
the continued development on memalloc helper and USB-audio low-
latency support are found in the rest.
Note that a few changes in the unusual places like arch/sh are
included, which are a part of ASoC DAI format cleanups.
ALSA core:
- Continued memalloc helper updates and cleanups, now supporting
non-coherent and non-contiguous pages
- Fixes for races in mixer OSS layer
ASoC:
- A new version of the audio graph card which supports a wider range
of systems
- Several conversions to YAML DT bindings
- Continuing cleanups to the SOF and Intel code
- Move of the Cirrus DSP framework into drivers/firmware to allow for
future use by non-audio DSPs
- An overhaul of the cs42l42 driver, correcting many problems
- DAI format terminology conversions over many drivers for cleanups
- Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim
MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia
Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS,
RT5682S, and RT9120 and Rockchip RV1126 and RK3568
USB-audio:
- Continued improvements on low-latency playback
- Quirks for Pioneer devices, Line6 HX-Stomp XL, Audient iD14
HD-audio:
- Reduce excessive udelay() calls on Intel platforms; this should
reduce the CPU load with PulseAudio
- Quirks for HP and Clevo laptops
FireWire:
- Support for meter information on MOTU"
* tag 'sound-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (513 commits)
ALSA: usb-audio: Add quirk for Audient iD14
ALSA: hda/realtek: Add quirk for Clevo PC70HS
ALSA: usb-audio: Line6 HX-Stomp XL USB_ID for 48k-fixed quirk
ALSA: usb-audio: Add registration quirk for JBL Quantum 400
ASoC: rsnd: Fix an error handling path in 'rsnd_node_count()'
ASoC: tlv320aic3x: Make aic3x_remove() return void
ASoC: Intel: soc-acpi: use const for all uses of snd_soc_acpi_codecs
ASoC: Intel: soc-acpi-cht: shrink tables using compatible IDs
ASoC: Intel: soc-acpi-byt: shrink tables using compatible IDs
ASoC: Intel: sof_rt5682: use comp_ids to enumerate rt5682s
ASoC: Intel: sof_rt5682: detect codec variant in probe function
ASoC: soc-acpi: add comp_ids field for machine driver matching
ASoC: mediatek: mt8195: add mt8195-mt6359-rt1011-rt5682 bindings document
ASoC: mediatek: mt8195: add machine driver with mt6359, rt1011 and rt5682
ASoC: Stop dummy from overriding hwparams
ASoC: topology: Change topology device to card device
ASoC: topology: Use correct device for prints
ASoC: topology: Check for dapm widget completeness
ASoC: topology: Add header payload_size verification
ASoC: core: Remove invalid snd_soc_component_set_jack call
...
Normally it is expected that the dsa_device_ops :: rcv() method finishes
parsing the DSA tag and consumes it, then never looks at it again.
But commit c0bcf53766 ("net: dsa: ocelot: add hardware timestamping
support for Felix") added support for RX timestamping in a very
unconventional way. On this switch, a partial timestamp is available in
the DSA header, but the driver got away with not parsing that timestamp
right away, but instead delayed that parsing for a little longer:
dsa_switch_rcv():
nskb = cpu_dp->rcv(skb, dev); <------------- not here
-> ocelot_rcv()
...
skb = nskb;
skb_push(skb, ETH_HLEN);
skb->pkt_type = PACKET_HOST;
skb->protocol = eth_type_trans(skb, skb->dev);
...
if (dsa_skb_defer_rx_timestamp(p, skb)) <--- but here
-> felix_rxtstamp()
return 0;
When in felix_rxtstamp(), this driver accounted for the fact that
eth_type_trans() happened in the meanwhile, so it got a hold of the
extraction header again by subtracting (ETH_HLEN + OCELOT_TAG_LEN) bytes
from the current skb->data.
This worked for quite some time but was quite fragile from the very
beginning. Not to mention that having DSA tag parsing split in two
different files, under different folders (net/dsa/tag_ocelot.c vs
drivers/net/dsa/ocelot/felix.c) made it quite non-obvious for patches to
come that they might break this.
Finally, the blamed commit does the following: at the end of
ocelot_rcv(), it checks whether the skb payload contains a VLAN header.
If it does, and this port is under a VLAN-aware bridge, that VLAN ID
might not be correct in the sense that the packet might have suffered
VLAN rewriting due to TCAM rules (VCAP IS1). So we consume the VLAN ID
from the skb payload using __skb_vlan_pop(), and take the classified
VLAN ID from the DSA tag, and construct a hwaccel VLAN tag with the
classified VLAN, and the skb payload is VLAN-untagged.
The big problem is that __skb_vlan_pop() does:
memmove(skb->data + VLAN_HLEN, skb->data, 2 * ETH_ALEN);
__skb_pull(skb, VLAN_HLEN);
aka it moves the Ethernet header 4 bytes to the right, and pulls 4 bytes
from the skb headroom (effectively also moving skb->data, by definition).
So for felix_rxtstamp()'s fragile logic, all bets are off now.
Instead of having the "extraction" pointer point to the DSA header,
it actually points to 4 bytes _inside_ the extraction header.
Corollary, the last 4 bytes of the "extraction" header are in fact 4
stale bytes of the destination MAC address from the Ethernet header,
from prior to the __skb_vlan_pop() movement.
So of course, RX timestamps are completely bogus when the system is
configured in this way.
The fix is actually very simple: just don't structure the code like that.
For better or worse, the DSA PTP timestamping API does not offer a
straightforward way for drivers to present their RX timestamps, but
other drivers (sja1105) have established a simple mechanism to carry
their RX timestamp from dsa_device_ops :: rcv() all the way to
dsa_switch_ops :: port_rxtstamp() and even later. That mechanism is to
simply save the partial timestamp to the skb->cb, and complete it later.
Question: why don't we simply populate the skb's struct
skb_shared_hwtstamps from ocelot_rcv(), and bother with this
complication of propagating the timestamp to felix_rxtstamp()?
Answer: dsa_switch_ops :: port_rxtstamp() answers the question whether
PTP packets need sleepable context to retrieve the full RX timestamp.
Currently felix_rxtstamp() answers "no, thanks" to that question, and
calls ocelot_ptp_gettime64() from softirq atomic context. This is
understandable, since Felix VSC9959 is a PCIe memory-mapped switch, so
hardware access does not require sleeping. But the felix driver is
preparing for the introduction of other switches where hardware access
is over a slow bus like SPI or MDIO:
https://lore.kernel.org/lkml/20210814025003.2449143-1-colin.foster@in-advantage.com/
So I would like to keep this code structure, so the rework needed when
that driver will need PTP support will be minimal (answer "yes, I need
deferred context for this skb's RX timestamp", then the partial
timestamp will still be found in the skb->cb.
Fixes: ea440cd2d9 ("net: dsa: tag_ocelot: use VLAN information from tagging header when available")
Reported-by: Po Liu <po.liu@nxp.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ETHTOOL_A_PAUSE_STAT_MAX is the MAX attribute id,
so we need to subtract non-stats and add one to
get a count (IOW -2+1 == -1).
Otherwise we'll see:
ethnl cmd 21: calculated reply length 40, but consumed 52
Fixes: 9a27a33027 ("ethtool: add standard pause stats")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Track skbs containing only zerocopy data and avoid charging them to
kernel memory to correctly account the memory utilization for
msg_zerocopy. All of the data in such skbs is held in user pages which
are already accounted to user. Before this change, they are charged
again in kernel in __zerocopy_sg_from_iter. The charging in kernel is
excessive because data is not being copied into skb frags. This
excessive charging can lead to kernel going into memory pressure
state which impacts all sockets in the system adversely. Mark pure
zerocopy skbs with a SKBFL_PURE_ZEROCOPY flag and remove
charge/uncharge for data in such skbs.
Initially, an skb is marked pure zerocopy when it is empty and in
zerocopy path. skb can then change from a pure zerocopy skb to mixed
data skb (zerocopy and copy data) if it is at tail of write queue and
there is room available in it and non-zerocopy data is being sent in
the next sendmsg call. At this time sk_mem_charge is done for the pure
zerocopied data and the pure zerocopy flag is unmarked. We found that
this happens very rarely on workloads that pass MSG_ZEROCOPY.
A pure zerocopy skb can later be coalesced into normal skb if they are
next to each other in queue but this patch prevents coalescing from
happening. This avoids complexity of charging when skb downgrades from
pure zerocopy to mixed. This is also rare.
In sk_wmem_free_skb, if it is a pure zerocopy skb, an sk_mem_uncharge
for SKB_TRUESIZE(skb_end_offset(skb)) is done for sk_mem_charge in
tcp_skb_entail for an skb without data.
Testing with the msg_zerocopy.c benchmark between two hosts(100G nics)
with zerocopy showed that before this patch the 'sock' variable in
memory.stat for cgroup2 that tracks sum of sk_forward_alloc,
sk_rmem_alloc and sk_wmem_queued is around 1822720 and with this
change it is 0. This is due to no charge to sk_forward_alloc for
zerocopy data and shows memory utilization for kernel is lowered.
With this commit we don't see the warning we saw in previous commit
which resulted in commit 84882cf72c.
Signed-off-by: Talal Ahmad <talalahmad@google.com>
Acked-by: Arjun Roy <arjunroy@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
security_sctp_assoc_established() is added to replace
security_inet_conn_established() called in
sctp_sf_do_5_1E_ca(), so that asoc can be accessed in security
subsystem and save the peer secid to asoc->peer_secid.
v1->v2:
- fix the return value of security_sctp_assoc_established() in
security.h, found by kernel test robot and Ondrej.
Fixes: 72e89f5008 ("security: Add support for SCTP security hooks")
Reported-by: Prashanth Prahlad <pprahlad@redhat.com>
Reviewed-by: Richard Haines <richard_c_haines@btinternet.com>
Tested-by: Richard Haines <richard_c_haines@btinternet.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
