Pull ARM SoC driver updates from Arnd Bergmann:
"These are all the driver updates for SoC specific drivers. There are a
couple of subsystems with individual maintainers picking up their
patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this tree this
time. There are only minor changes, but they depend on other tegra
driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process. This
depends on a small sound driver change that is included here as
well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains a
mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for the
"Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed BMCs,
something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better
suspend/resume support"
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
layerscape, allwinner, broadcom, and omap"
* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
optee: Fix spelling mistake "reclain" -> "reclaim"
Revert "firmware: qcom: scm: Add support for MC boot address API"
qcom: spm: allow compile-testing
firmware: arm_ffa: Remove unused 'compat_version' variable
soc: samsung: exynos-chipid: add exynosautov9 SoC support
firmware: qcom: scm: Don't break compile test on non-ARM platforms
soc: qcom: smp2p: Add of_node_put() before goto
soc: qcom: apr: Add of_node_put() before return
soc: qcom: qcom_stats: Fix client votes offset
soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
firmware: qcom: scm: Add support for MC boot address API
soc: qcom: spm: Add 8916 SPM register data
dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
soc: qcom: socinfo: Add PM8150C and SMB2351 models
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
soc: aspeed: Add UART routing support
soc: fsl: dpio: rename the enqueue descriptor variable
soc: fsl: dpio: use an explicit NULL instead of 0
...
Pull ARM SoC DT updates from Arnd Bergmann:
"This is a rather large update for the ARM devicetree files, after a
few quieter releases, with 775 total commits and 47 branches pulled
into this one.
There are 5 new SoC types plus some minor variations, and a total of
60 new machines, so I'm limiting the summary to the main noteworthy
items:
- Apple M1 gain support for PCI and pinctrl, getting a bit closer to
a usable system out of the box.
- Qualcomm gains support for Snapdragon 690 (aka SM6350) as well as
SM7225, 11 new smartphones, and three additional Chromebooks, and
improvements all over the place.
- Samsung gains support for ExynosAutov9, an automotive version of
their smartphone SoC, but otherwise no major changes.
- Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a number
of improvements for the recently added SAMA7 family. The LAN966 SoC
that was added in the platform code does not have dts files yet.
Two board files are added for the older at91sam9g20 SoC
- Aspeed supports two additional server boards using their AST2600 as
BMC, and improves support for qemu models
- Rockchip RK3566/RK3688 gets added, along with six new development
boards using RK3328/RK3399/RK3566, and one Chromebook tablet.
- Two NAS boxes are added using the ARMv4 based Gemini platform
- One new board is added to the Intel Arria SoC FPGA family
- Marvell adds one network switch based on Armada 381 and the new
MOCHAbin 7040 development board
- NXP adds support for the S32G2 automotive SoC, two imx6 based ebook
readers, and three additional development boards, which is notably
less than their usual additions, but they also gain improvements to
their many existing boards
- STmicroelectronics adds their stm32mp13 SoC family along with a
reference board
- Renesas adds new versions of their R-Car Gen3 SoCs and many updates
for their older generations
- Broadcom adds support for a number of Cisco Meraki wireless
controllers, along with two new boards and other updates for
BCM53xx/BCM47xx networking SoCs and the Raspberry Pi boards
- Mediatek improves support for the MT81xx SoCs used in Chromebooks
as well as the MT76xx networking SoCs
- NVIDIA adds a number of cleanups and additional support for more
hardware on the already supported machines
- TI K3 adds support for three new boards along with cleanups
- Toshiba adds one board for the Visconti family
- Xilinx adds five new ZynqMP based machines
- Amlogic support is added for the Radxa Zero and two Jethub home
automation controllers, along with changes to other machines
- Rob Herring continues his work on fixing dtc warnings all over the
tree.
- Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon,
Ux500, Unisoc"
* tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (720 commits)
arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address
arm64: dts: apple: t8103: Add root port interrupt routing
arm64: dts: apple: t8103: Add PCIe DARTs
arm64: apple: Add PCIe node
arm64: apple: Add pinctrl nodes
ARM: dts: arm: Update ICST clock nodes 'reg' and node names
ARM: dts: arm: Update register-bit-led nodes 'reg' and node names
arm64: dts: exynos: add chipid node for exynosautov9 SoC
ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node
Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors"
arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node
arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property
arm64: dts: qcom: sm8350: Add CPU topology and idle-states
arm64: dts: qcom: Drop unneeded extra device-specific includes
arm64: dts: qcom: msm8916: Drop standalone smem node
arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes
arm64: dts: qcom: msm8916-asus-z00l: Add sensors
arm64: dts: qcom: msm8916-asus-z00l: Add SDCard
arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen
arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node
...
Pull ARM SoC updates from Arnd Bergmann:
"The SoC updates this time are mainly removing obsolete code from the
OMAP2 platform, another step in the eternal cleanup of that platform.
There are two new SoCs getting added: STMicroelectronics stm32mp13 and
Microchip lan966. Both fit into existing platforms and require minimal
changes here.
A couple of MAINTAINER file updates relate to those changes, and
update some file paths"
* tag 'soc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
MAINTAINERS: Update BCM7XXX entry with additional patterns
MAINTAINERS: add pinctrl-apple-gpio to ARM/APPLE MACHINE
MAINTAINERS: Add pasemi i2c to ARM/APPLE MACHINE
ARM: SPEAr: Update MAINTAINERS entries
ARM: OMAP2+: Drop unused CM defines for am3
ARM: OMAP2+: Drop unused CM and SCRM defines for omap4
ARM: OMAP2+: Drop unused CM and SCRM defines for omap5
ARM: OMAP2+: Drop unused CM defines for dra7
ARM: OMAP2+: Drop unused PRM defines for am3
ARM: OMAP2+: Drop unused PRM defines for am4
ARM: OMAP2+: Drop unused PRM defines for omap4
ARM: OMAP2+: Drop unused PRM defines for omap5
ARM: OMAP2+: Drop unused PRM defines for dra7
ARM: OMAP2+: Fix comment typo
ARM: OMAP2+: Fix typo in some comments
ARM: at91: add basic support for new SoC family lan966
dt-bindings: arm: at91: Document lan966 pcb8291 and pcb8290 boards
ARM: at91: Documentation: add lan966 family
ARM: at91: Documentation: add sama7g5 family
MAINTAINERS: add an entry for NXP S32G boards
...
tl;dr: AMX state is ~8k. Signal frames can have space for this
~8k and each signal entry writes out all 8k even if it is zeros.
Skip writing zeros for AMX to speed up signal delivery by about
4% overall when AMX is in its init state.
This is a user-visible change to the sigframe ABI.
== Hardware XSAVE Background ==
XSAVE state components may be tracked by the processor as being
in their initial configuration. Software can detect which
features are in this configuration by looking at the XSTATE_BV
field in an XSAVE buffer or with the XGETBV(1) instruction.
Both the XSAVE and XSAVEOPT instructions enumerate features s
being in the initial configuration via the XSTATE_BV field in the
XSAVE header, However, XSAVEOPT declines to actually write
features in their initial configuration to the buffer. XSAVE
writes the feature unconditionally, regardless of whether it is
in the initial configuration or not.
Basically, XSAVE users never need to inspect XSTATE_BV to
determine if the feature has been written to the buffer.
XSAVEOPT users *do* need to inspect XSTATE_BV. They might also
need to clear out the buffer if they want to make an isolated
change to the state, like modifying one register.
== Software Signal / XSAVE Background ==
Signal frames have historically been written with XSAVE itself.
Each state is written in its entirety, regardless of being in its
initial configuration.
In other words, the signal frame ABI uses the XSAVE behavior, not
the XSAVEOPT behavior.
== Problem ==
This means that any application which has acquired permission to
use AMX via ARCH_REQ_XCOMP_PERM will write 8k of state to the
signal frame. This 8k write will occur even when AMX was in its
initial configuration and software *knows* this because of
XSTATE_BV.
This problem also exists to a lesser degree with AVX-512 and its
2k of state. However, AVX-512 use does not require
ARCH_REQ_XCOMP_PERM and is more likely to have existing users
which would be impacted by any change in behavior.
== Solution ==
Stop writing out AMX xfeatures which are in their initial state
to the signal frame. This effectively makes the signal frame
XSAVE buffer look as if it were written with a combination of
XSAVEOPT and XSAVE behavior. Userspace which handles XSAVEOPT-
style buffers should be able to handle this naturally.
For now, include only the AMX xfeatures: XTILE and XTILEDATA in
this new behavior. These require new ABI to use anyway, which
makes their users very unlikely to be broken. This XSAVEOPT-like
behavior should be expected for all future dynamic xfeatures. It
may also be extended to legacy features like AVX-512 in the
future.
Only attempt this optimization on systems with dynamic features.
Disable dynamic feature support (XFD) if XGETBV1 is unavailable
by adding a CPUID dependency.
This has been measured to reduce the *overall* cycle cost of
signal delivery by about 4%.
Fixes: 2308ee57d9 ("x86/fpu/amx: Enable the AMX feature in 64-bit mode")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: "Chang S. Bae" <chang.seok.bae@intel.com>
Link: https://lore.kernel.org/r/20211102224750.FA412E26@davehans-spike.ostc.intel.com
Pull per signal_struct coredumps from Eric Biederman:
"Current coredumps are mixed up with the exit code, the signal handling
code, and the ptrace code making coredumps much more complicated than
necessary and difficult to follow.
This series of changes starts with ptrace_stop and cleans it up,
making it easier to follow what is happening in ptrace_stop. Then
cleans up the exec interactions with coredumps. Then cleans up the
coredump interactions with exit. Finally the coredump interactions
with the signal handling code is cleaned up.
The first and last changes are bug fixes for minor bugs.
I believe the fact that vfork followed by execve can kill the process
the called vfork if exec fails is sufficient justification to change
the userspace visible behavior.
In previous discussions some of these changes were organized
differently and individually appeared to make the code base worse. As
currently written I believe they all stand on their own as cleanups
and bug fixes.
Which means that even if the worst should happen and the last change
needs to be reverted for some unimaginable reason, the code base will
still be improved.
If the worst does not happen there are a more cleanups that can be
made. Signals that generate coredumps can easily become eligible for
short circuit delivery in complete_signal. The entire rendezvous for
generating a coredump can move into get_signal. The function
force_sig_info_to_task be written in a way that does not modify the
signal handling state of the target task (because coredumps are
eligible for short circuit delivery). Many of these future cleanups
can be done another way but nothing so cleanly as if coredumps become
per signal_struct"
* 'per_signal_struct_coredumps-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
coredump: Limit coredumps to a single thread group
coredump: Don't perform any cleanups before dumping core
exit: Factor coredump_exit_mm out of exit_mm
exec: Check for a pending fatal signal instead of core_state
ptrace: Remove the unnecessary arguments from arch_ptrace_stop
signal: Remove the bogus sigkill_pending in ptrace_stop
Properly document why changing PCI Class Code for GT64111 device to Host
Bridge is required as important details were after 20 years forgotten.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Pull sound updates from Takashi Iwai:
"Lots of code development have been see in ASoC side as usual, while
the continued development on memalloc helper and USB-audio low-
latency support are found in the rest.
Note that a few changes in the unusual places like arch/sh are
included, which are a part of ASoC DAI format cleanups.
ALSA core:
- Continued memalloc helper updates and cleanups, now supporting
non-coherent and non-contiguous pages
- Fixes for races in mixer OSS layer
ASoC:
- A new version of the audio graph card which supports a wider range
of systems
- Several conversions to YAML DT bindings
- Continuing cleanups to the SOF and Intel code
- Move of the Cirrus DSP framework into drivers/firmware to allow for
future use by non-audio DSPs
- An overhaul of the cs42l42 driver, correcting many problems
- DAI format terminology conversions over many drivers for cleanups
- Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim
MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia
Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS,
RT5682S, and RT9120 and Rockchip RV1126 and RK3568
USB-audio:
- Continued improvements on low-latency playback
- Quirks for Pioneer devices, Line6 HX-Stomp XL, Audient iD14
HD-audio:
- Reduce excessive udelay() calls on Intel platforms; this should
reduce the CPU load with PulseAudio
- Quirks for HP and Clevo laptops
FireWire:
- Support for meter information on MOTU"
* tag 'sound-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (513 commits)
ALSA: usb-audio: Add quirk for Audient iD14
ALSA: hda/realtek: Add quirk for Clevo PC70HS
ALSA: usb-audio: Line6 HX-Stomp XL USB_ID for 48k-fixed quirk
ALSA: usb-audio: Add registration quirk for JBL Quantum 400
ASoC: rsnd: Fix an error handling path in 'rsnd_node_count()'
ASoC: tlv320aic3x: Make aic3x_remove() return void
ASoC: Intel: soc-acpi: use const for all uses of snd_soc_acpi_codecs
ASoC: Intel: soc-acpi-cht: shrink tables using compatible IDs
ASoC: Intel: soc-acpi-byt: shrink tables using compatible IDs
ASoC: Intel: sof_rt5682: use comp_ids to enumerate rt5682s
ASoC: Intel: sof_rt5682: detect codec variant in probe function
ASoC: soc-acpi: add comp_ids field for machine driver matching
ASoC: mediatek: mt8195: add mt8195-mt6359-rt1011-rt5682 bindings document
ASoC: mediatek: mt8195: add machine driver with mt6359, rt1011 and rt5682
ASoC: Stop dummy from overriding hwparams
ASoC: topology: Change topology device to card device
ASoC: topology: Use correct device for prints
ASoC: topology: Check for dapm widget completeness
ASoC: topology: Add header payload_size verification
ASoC: core: Remove invalid snd_soc_component_set_jack call
...
Throughout the OpenRISC kernel port VMA is passed as NULL when flushing
kernel tlb entries. Somehow this was missed when I was testing
c28b27416d ("openrisc: Implement proper SMP tlb flushing") and now the
SMP kernel fails to completely boot.
In OpenRISC VMA is used only to determine which cores need to have their
TLB entries flushed.
This patch updates the logic to flush tlbs on all cores when the VMA is
passed as NULL. Also, we update places VMA is passed as NULL to use
flush_tlb_kernel_range instead. Now, the only place VMA is passed as
NULL is in the implementation of flush_tlb_kernel_range.
Fixes: c28b27416d ("openrisc: Implement proper SMP tlb flushing")
Reported-by: Jan Henrik Weinstock <jan.weinstock@rwth-aachen.de>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Pull devicetree updates from Rob Herring:
- Convert /reserved-memory bindings to schemas
- Convert a bunch of NFC bindings to schemas
- Convert bindings to schema: Xilinx USB, Freescale DDR controller, Arm
CCI-400, UBlox Neo-6M, 1-Wire GPIO, MSI controller, ASpeed LPC, OMAP
and Inside-Secure HWRNG, register-bit-led, OV5640, Silead GSL1680,
Elan ekth3000, Marvell bluetooth, TI wlcore, TI bluetooth, ESP
ESP8089, tlm,trusted-foundations, Microchip cap11xx, Ralink SoCs and
boards, and TI sysc
- New binding schemas for: msi-ranges, Aspeed UART routing controller,
palmbus, Xylon LogiCVC display controller, Mediatek's MT7621 SDRAM
memory controller, and Apple M1 PCIe host
- Run schema checks for %.dtb targets
- Improve build time when using DT_SCHEMA_FILES
- Improve error message when dtschema is not found
- Various doc reference fixes in MAINTAINERS
- Convert architectures to common CPU h/w ID parsing function
of_get_cpu_hwid().
- Allow for empty NUMA node IDs which may be hotplugged
- Cleanup of __fdt_scan_reserved_mem()
- Constify device_node parameters
- Update dtc to upstream v1.6.1-19-g0a3a9d3449c8. Adds new checks
'node_name_vs_property_name' and 'interrupt_map'.
- Enable dtc 'unit_address_format' warning by default
- Fix unittest EXPECT text for gpio hog errors
* tag 'devicetree-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (97 commits)
dt-bindings: net: ti,bluetooth: Document default max-speed
dt-bindings: pci: rcar-pci-ep: Document r8a7795
dt-bindings: net: qcom,ipa: IPA does support up to two iommus
of/fdt: Remove of_scan_flat_dt() usage for __fdt_scan_reserved_mem()
of: unittest: document intentional interrupt-map provider build warning
of: unittest: fix EXPECT text for gpio hog errors
of/unittest: Disable new dtc node_name_vs_property_name and interrupt_map warnings
scripts/dtc: Update to upstream version v1.6.1-19-g0a3a9d3449c8
dt-bindings: arm: firmware: tlm,trusted-foundations: Convert txt bindings to yaml
dt-bindings: display: tilcd: Fix endpoint addressing in example
dt-bindings: input: microchip,cap11xx: Convert txt bindings to yaml
dt-bindings: ufs: exynos-ufs: add exynosautov9 compatible
dt-bindings: ufs: exynos-ufs: add io-coherency property
dt-bindings: mips: convert Ralink SoCs and boards to schema
dt-bindings: display: xilinx: Fix example with psgtr
dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml
dt-bindings: Add a help message when dtschema tools are missing
dt-bindings: bus: ti-sysc: Update to use yaml binding
dt-bindings: sram: Allow numbers in sram region node name
dt-bindings: display: Document the Xylon LogiCVC display controller
...
Pull drm updates from Dave Airlie:
"Summary below. i915 starts to add support for DG2 GPUs, enables DG1
and ADL-S support by default, lots of work to enable DisplayPort 2.0
across drivers. Lots of documentation updates and fixes across the
board.
core:
- improve dma_fence, lease and resv documentation
- shmem-helpers: allocate WC pages on x86, use vmf_insert_pin
- sched fixes/improvements
- allow empty drm leases
- add dma resv iterator
- add more DP 2.0 headers
- DP MST helper improvements for DP2.0
dma-buf:
- avoid warnings, remove fence trace macros
bridge:
- new helper to get rid of panels
- probe improvements for it66121
- enable DSI EOTP for anx7625
fbdev:
- efifb: release runtime PM on destroy
ttm:
- kerneldoc switch
- helper to clear all DMA mappings
- pool shrinker optimizaton
- remove ttm_tt_destroy_common
- update ttm_move_memcpy for async use
panel:
- add new panel-edp driver
amdgpu:
- Initial DP 2.0 support
- Initial USB4 DP tunnelling support
- Aldebaran MCE support
- Modifier support for DCC image stores for GFX 10.3
- Display rework for better FP code handling
- Yellow Carp/Cyan Skillfish updates
- Cyan Skillfish display support
- convert vega/navi to IP discovery asic enumeration
- validate IP discovery table
- RAS improvements
- Lots of fixes
i915:
- DG1 PCI IDs + LMEM discovery/placement
- DG1 GuC submission by default
- ADL-S PCI IDs updated + enabled by default
- ADL-P (XE_LPD) fixed and updates
- DG2 display fixes
- PXP protected object support for Gen12 integrated
- expose multi-LRC submission interface for GuC
- export logical engine instance to user
- Disable engine bonding on Gen12+
- PSR cleanup
- PSR2 selective fetch by default
- DP 2.0 prep work
- VESA vendor block + MSO use of it
- FBC refactor
- try again to fix fast-narrow vs slow-wide eDP training
- use THP when IOMMU enabled
- LMEM backup/restore for suspend/resume
- locking simplification
- GuC major reworking
- async flip VT-D workaround changes
- DP link training improvements
- misc display refactorings
bochs:
- new PCI ID
rcar-du:
- Non-contiguious buffer import support for rcar-du
- r8a779a0 support prep
omapdrm:
- COMPILE_TEST fixes
sti:
- COMPILE_TEST fixes
msm:
- fence ordering improvements
- eDP support in DP sub-driver
- dpu irq handling cleanup
- CRC support for making igt happy
- NO_CONNECTOR bridge support
- dsi: 14nm phy support for msm8953
- mdp5: msm8x53, sdm450, sdm632 support
stm:
- layer alpha + zpo support
v3d:
- fix Vulkan CTS failure
- support multiple sync objects
gud:
- add R8/RGB332/RGB888 pixel formats
vc4:
- convert to new bridge helpers
vgem:
- use shmem helpers
virtio:
- support mapping exported vram
zte:
- remove obsolete driver
rockchip:
- use bridge attach no connector for LVDS/RGB"
* tag 'drm-next-2021-11-03' of git://anongit.freedesktop.org/drm/drm: (1259 commits)
drm/amdgpu/gmc6: fix DMA mask from 44 to 40 bits
drm/amd/display: MST support for DPIA
drm/amdgpu: Fix even more out of bound writes from debugfs
drm/amdgpu/discovery: add SDMA IP instance info for soc15 parts
drm/amdgpu/discovery: add UVD/VCN IP instance info for soc15 parts
drm/amdgpu/UAPI: rearrange header to better align related items
drm/amd/display: Enable dpia in dmub only for DCN31 B0
drm/amd/display: Fix USB4 hot plug crash issue
drm/amd/display: Fix deadlock when falling back to v2 from v3
drm/amd/display: Fallback to clocks which meet requested voltage on DCN31
drm/amd/display: move FPU associated DCN301 code to DML folder
drm/amd/display: fix link training regression for 1 or 2 lane
drm/amd/display: add two lane settings training options
drm/amd/display: decouple hw_lane_settings from dpcd_lane_settings
drm/amd/display: implement decide lane settings
drm/amd/display: adopt DP2.0 LT SCR revision 8
drm/amd/display: FEC configuration for dpia links in MST mode
drm/amd/display: FEC configuration for dpia links
drm/amd/display: Add workaround flag for EDID read on certain docks
drm/amd/display: Set phy_mux_sel bit in dmub scratch register
...
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to the most recent upstream
revision, address some issues related to the ACPI power resources
management, simplify the enumeration of PCI devices having ACPI
companions, add new quirks, fix assorted problems, update the
ACPI-related information in maintainers and clean up code in several
places.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20210930
including the following changes:
- Fix system-wide resume issue caused by evaluating control
methods too early in the resume path (Rafael Wysocki).
- Add support for Windows 2020 _OSI string (Mario Limonciello).
- Add Generic Port Affinity type for SRAT (Alison Schofield).
- Add disassembly support for the NHLT ACPI table (Bob Moore).
- Avoid flushing caches before entering C3 type of idle states on AMD
processors (Deepak Sharma).
- Avoid enumerating CPUs that are not present and not online-capable
according to the platform firmware (Mario Limonciello).
- Add DMI-based mechanism to quirk IRQ overrides and use it for two
platforms (Hui Wang).
- Change the configuration of unused ACPI device objects to reflect
the D3cold power state after enumerating devices (Rafael Wysocki).
- Update MAINTAINERS information regarding ACPI (Rafael Wysocki).
- Fix typo in ACPI Kconfig (Masanari Iid).
- Use sysfs_emit() instead of snprintf() in some places (Qing Wang).
- Make the association of ACPI device objects with PCI devices more
straightforward and simplify the code doing that for all devices in
general (Rafael Wysocki).
- Use acpi_device_adr() in acpi_find_child_device() instead of
evaluating _ADR (Rafael Wysocki).
- Drop duplicate device IDs from PNP device IDs list (Krzysztof
Kozlowski).
- Allow acpi_idle_play_dead() to use C3 on AMD processors (Richard
Gong).
- Use ACPI_COMPANION() to simplify code in some drivers (Rafael
Wysocki).
- Check the states of all ACPI power resources during initialization
to avoid dealing with power resources in unknown states (Rafael
Wysocki).
- Fix ACPI power resource issues related to sharing wakeup power
resources (Rafael Wysocki).
- Avoid registering redundant suspend_ops (Rafael Wysocki).
- Report battery charging state as "full" if it appears to be over
the design capacity (André Almeida).
- Quirk GK45 mini PC to skip reading _PSR in the AC driver (Stefan
Schaeckeler).
- Mark apei_hest_parse() static (Christoph Hellwig).
- Relax platform response timeout to 1 second after instructing it to
inject an error (Shuai Xue).
- Make the PRM code handle memory allocation and remapping failures
more gracefully and drop some unnecessary blank lines from that
code (Aubrey Li).
- Fix spelling mistake in the ACPI documentation (Colin Ian King)"
* tag 'acpi-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (36 commits)
ACPI: glue: Use acpi_device_adr() in acpi_find_child_device()
perf: qcom_l2_pmu: ACPI: Use ACPI_COMPANION() directly
ACPI: APEI: mark apei_hest_parse() static
ACPI: APEI: EINJ: Relax platform response timeout to 1 second
gpio-amdpt: ACPI: Use the ACPI_COMPANION() macro directly
nouveau: ACPI: Use the ACPI_COMPANION() macro directly
ACPI: resources: Add one more Medion model in IRQ override quirk
ACPI: AC: Quirk GK45 to skip reading _PSR
ACPI: PM: sleep: Do not set suspend_ops unnecessarily
ACPI: PRM: Handle memory allocation and memory remap failure
ACPI: PRM: Remove unnecessary blank lines
ACPI: PM: Turn off wakeup power resources on _DSW/_PSW errors
ACPI: PM: Fix sharing of wakeup power resources
ACPI: PM: Turn off unused wakeup power resources
ACPI: PM: Check states of power resources during initialization
ACPI: replace snprintf() in "show" functions with sysfs_emit()
ACPI: LPSS: Use ACPI_COMPANION() directly
ACPI: scan: Release PM resources blocked by unused objects
ACPI: battery: Accept charges over the design capacity as full
ACPICA: Update version to 20210930
...
Pull gfs2 mmap + page fault deadlocks fixes from Andreas Gruenbacher:
"Functions gfs2_file_read_iter and gfs2_file_write_iter are both
accessing the user buffer to write to or read from while holding the
inode glock.
In the most basic deadlock scenario, that buffer will not be resident
and it will be mapped to the same file. Accessing the buffer will
trigger a page fault, and gfs2 will deadlock trying to take the same
inode glock again while trying to handle that fault.
Fix that and similar, more complex scenarios by disabling page faults
while accessing user buffers. To make this work, introduce a small
amount of new infrastructure and fix some bugs that didn't trigger so
far, with page faults enabled"
* tag 'gfs2-v5.15-rc5-mmap-fault' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix mmap + page fault deadlocks for direct I/O
iov_iter: Introduce nofault flag to disable page faults
gup: Introduce FOLL_NOFAULT flag to disable page faults
iomap: Add done_before argument to iomap_dio_rw
iomap: Support partial direct I/O on user copy failures
iomap: Fix iomap_dio_rw return value for user copies
gfs2: Fix mmap + page fault deadlocks for buffered I/O
gfs2: Eliminate ip->i_gh
gfs2: Move the inode glock locking to gfs2_file_buffered_write
gfs2: Introduce flag for glock holder auto-demotion
gfs2: Clean up function may_grant
gfs2: Add wrapper for iomap_file_buffered_write
iov_iter: Introduce fault_in_iov_iter_writeable
iov_iter: Turn iov_iter_fault_in_readable into fault_in_iov_iter_readable
gup: Turn fault_in_pages_{readable,writeable} into fault_in_{readable,writeable}
powerpc/kvm: Fix kvm_use_magic_page
iov_iter: Fix iov_iter_get_pages{,_alloc} page fault return value
* clk-imx: (21 commits)
clk: imx: Make CLK_IMX8ULP select MXC_CLK
clk: imx: imx6ul: Fix csi clk gate register
clk: imx: imx6ul: Move csi_sel mux to correct base register
clk: imx: Fix the build break when clk-imx8ulp build as module
clk: imx: Add the pcc reset controller support on imx8ulp
clk: imx: Add clock driver for imx8ulp
clk: imx: Update the pfdv2 for 8ulp specific support
clk: imx: disable the pfd when set pfdv2 clock rate
clk: imx: Add 'CLK_SET_RATE_NO_REPARENT' for composite-7ulp
clk: imx: disable i.mx7ulp composite clock during initialization
clk: imx: Update the compsite driver to support imx8ulp
clk: imx: Update the pllv4 to support imx8ulp
dt-bindings: clock: Add imx8ulp clock support
clk: imx: Rework imx_clk_hw_pll14xx wrapper
clk: imx: Rework all imx_clk_hw_composite wrappers
clk: imx: Rework all clk_hw_register_divider wrappers
clk: imx: Rework all clk_hw_register_mux wrappers
clk: imx: Rework all clk_hw_register_gate2 wrappers
clk: imx: Rework all clk_hw_register_gate wrappers
clk: imx: Make mux/mux2 clk based helpers use clk_hw based ones
...
* clk-ux500:
clk: ux500: Add driver for the reset portions of PRCC
dt-bindings: clock: u8500: Rewrite in YAML and extend
* clk-debugfs:
clk: use clk_core_get_rate_recalc() in clk_rate_get()
Pull KVM updates from Paolo Bonzini:
"ARM:
- More progress on the protected VM front, now with the full fixed
feature set as well as the limitation of some hypercalls after
initialisation.
- Cleanup of the RAZ/WI sysreg handling, which was pointlessly
complicated
- Fixes for the vgic placement in the IPA space, together with a
bunch of selftests
- More memcg accounting of the memory allocated on behalf of a guest
- Timer and vgic selftests
- Workarounds for the Apple M1 broken vgic implementation
- KConfig cleanups
- New kvmarm.mode=none option, for those who really dislike us
RISC-V:
- New KVM port.
x86:
- New API to control TSC offset from userspace
- TSC scaling for nested hypervisors on SVM
- Switch masterclock protection from raw_spin_lock to seqcount
- Clean up function prototypes in the page fault code and avoid
repeated memslot lookups
- Convey the exit reason to userspace on emulation failure
- Configure time between NX page recovery iterations
- Expose Predictive Store Forwarding Disable CPUID leaf
- Allocate page tracking data structures lazily (if the i915 KVM-GT
functionality is not compiled in)
- Cleanups, fixes and optimizations for the shadow MMU code
s390:
- SIGP Fixes
- initial preparations for lazy destroy of secure VMs
- storage key improvements/fixes
- Log the guest CPNC
Starting from this release, KVM-PPC patches will come from Michael
Ellerman's PPC tree"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
RISC-V: KVM: fix boolreturn.cocci warnings
RISC-V: KVM: remove unneeded semicolon
RISC-V: KVM: Fix GPA passed to __kvm_riscv_hfence_gvma_xyz() functions
RISC-V: KVM: Factor-out FP virtualization into separate sources
KVM: s390: add debug statement for diag 318 CPNC data
KVM: s390: pv: properly handle page flags for protected guests
KVM: s390: Fix handle_sske page fault handling
KVM: x86: SGX must obey the KVM_INTERNAL_ERROR_EMULATION protocol
KVM: x86: On emulation failure, convey the exit reason, etc. to userspace
KVM: x86: Get exit_reason as part of kvm_x86_ops.get_exit_info
KVM: x86: Clarify the kvm_run.emulation_failure structure layout
KVM: s390: Add a routine for setting userspace CPU state
KVM: s390: Simplify SIGP Set Arch handling
KVM: s390: pv: avoid stalls when making pages secure
KVM: s390: pv: avoid stalls for kvm_s390_pv_init_vm
KVM: s390: pv: avoid double free of sida page
KVM: s390: pv: add macros for UVC CC values
s390/mm: optimize reset_guest_reference_bit()
s390/mm: optimize set_guest_storage_key()
s390/mm: no need for pte_alloc_map_lock() if we know the pmd is present
...
Pull hyperv updates from Wei Liu:
- Initial patch set for Hyper-V isolation VM support (Tianyu Lan)
- Fix a warning on preemption (Vitaly Kuznetsov)
- A bunch of misc cleanup patches
* tag 'hyperv-next-signed-20211102' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Protect set_hv_tscchange_cb() against getting preempted
Drivers: hv : vmbus: Adding NULL pointer check
x86/hyperv: Remove duplicate include
x86/hyperv: Remove duplicated include in hv_init
Drivers: hv: vmbus: Remove unused code to check for subchannels
Drivers: hv: vmbus: Initialize VMbus ring buffer for Isolation VM
Drivers: hv: vmbus: Add SNP support for VMbus channel initiate message
x86/hyperv: Add ghcb hvcall support for SNP VM
x86/hyperv: Add Write/Read MSR registers via ghcb page
Drivers: hv: vmbus: Mark vmbus ring buffer visible to host in Isolation VM
x86/hyperv: Add new hvcall guest address host visibility support
x86/hyperv: Initialize shared memory boundary in the Isolation VM.
x86/hyperv: Initialize GHCB page in Isolation VM
Pull printk updates from Petr Mladek:
- Extend %pGp print format to print hex value of the page flags
- Use kvmalloc instead of kmalloc to allocate devkmsg buffers
- Misc cleanup and warning fixes
* tag 'printk-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
vsprintf: Update %pGp documentation about that it prints hex value
lib/vsprintf.c: Amend static asserts for format specifier flags
vsprintf: Make %pGp print the hex value
test_printf: Append strings more efficiently
test_printf: Remove custom appending of '|'
test_printf: Remove separate page_flags variable
test_printf: Make pft array const
ia64: don't do IA64_CMPXCHG_DEBUG without CONFIG_PRINTK
printk: use gnu_printf format attribute for printk_sprint()
printk: avoid -Wsometimes-uninitialized warning
printk: use kvmalloc instead of kmalloc for devkmsg_user
Merge x86-specific ACPI updates, ACPI resources management updates,
one ACPI device enumeration update and miscellaneous ACPI updates for
5.16-rc1:
- Avoid flushing caches before entering C3 type of idle states on
AMD processors (Deepak Sharma).
- Avoid enumerating CPUs that are not present and not online-capable
according to the platform firmware (Mario Limonciello).
- Add DMI-based mechanism to quirk IRQ overrides and use it for two
platforms (Hui Wang).
- Change the configuration of unused ACPI device objects to reflect
the D3cold power state after enumerating devices (Rafael Wysocki).
- Update MAINTAINERS information regarding ACPI (Rafael Wysocki).
- Fix typo in ACPI Kconfig (Masanari Iid).
- Use sysfs_emit() instead of snprintf() in some places (Qing Wang).
* acpi-x86:
x86: ACPI: cstate: Optimize C3 entry on AMD CPUs
x86/ACPI: Don't add CPUs that are not online capable
ACPICA: Add support for MADT online enabled bit
* acpi-resources:
ACPI: resources: Add one more Medion model in IRQ override quirk
ACPI: resources: Add DMI-based legacy IRQ override quirk
* acpi-scan:
ACPI: scan: Release PM resources blocked by unused objects
* acpi-misc:
ACPI: replace snprintf() in "show" functions with sysfs_emit()
ACPI: Update information in MAINTAINERS
ACPI: Kconfig: Fix a typo in Kconfig
Pull x86 core updates from Borislav Petkov:
- Do not #GP on userspace use of CLI/STI but pretend it was a NOP to
keep old userspace from breaking. Adjust the corresponding iopl
selftest to that.
- Improve stack overflow warnings to say which stack got overflowed and
raise the exception stack sizes to 2 pages since overflowing the
single page of exception stack is very easy to do nowadays with all
the tracing machinery enabled. With that, rip out the custom mapping
of AMD SEV's too.
- A bunch of changes in preparation for FGKASLR like supporting more
than 64K section headers in the relocs tool, correct ORC lookup table
size to cover the whole kernel .text and other adjustments.
* tag 'x86_core_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/x86/iopl: Adjust to the faked iopl CLI/STI usage
vmlinux.lds.h: Have ORC lookup cover entire _etext - _stext
x86/boot/compressed: Avoid duplicate malloc() implementations
x86/boot: Allow a "silent" kaslr random byte fetch
x86/tools/relocs: Support >64K section headers
x86/sev: Make the #VC exception stacks part of the default stacks storage
x86: Increase exception stack sizes
x86/mm/64: Improve stack overflow warnings
x86/iopl: Fake iopl(3) CLI/STI usage
Pull networking updates from Jakub Kicinski:
"Core:
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace to
work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction, by
exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP buffer
pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we can
add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements to
CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies"
* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
Revert "net: avoid double accounting for pure zerocopy skbs"
selftests: net: add arp_ndisc_evict_nocarrier
net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
net: arp: introduce arp_evict_nocarrier sysctl parameter
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
net: avoid double accounting for pure zerocopy skbs
tcp: rename sk_wmem_free_skb
netdevsim: fix uninit value in nsim_drv_configure_vfs()
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
...
Xen-pciback driver was designed to be built for x86 only. But it
can also be used by other architectures, e.g. Arm.
Currently PCI backend implements multiple functionalities at a time,
such as:
1. It is used as a database for assignable PCI devices, e.g. xl
pci-assignable-{add|remove|list} manipulates that list. So, whenever
the toolstack needs to know which PCI devices can be passed through
it reads that from the relevant sysfs entries of the pciback.
2. It is used to hold the unbound PCI devices list, e.g. when passing
through a PCI device it needs to be unbound from the relevant device
driver and bound to pciback (strictly speaking it is not required
that the device is bound to pciback, but pciback is again used as a
database of the passed through PCI devices, so we can re-bind the
devices back to their original drivers when guest domain shuts down)
3. Device reset for the devices being passed through
4. Para-virtualised use-cases support
The para-virtualised part of the driver is not always needed as some
architectures, e.g. Arm or x86 PVH Dom0, are not using backend-frontend
model for PCI device passthrough.
For such use-cases make the very first step in splitting the
xen-pciback driver into two parts: Xen PCI stub and PCI PV backend
drivers.
For that add new configuration options CONFIG_XEN_PCI_STUB and
CONFIG_XEN_PCIDEV_STUB, so the driver can be limited in its
functionality, e.g. no support for para-virtualised scenario.
x86 platform will continue using CONFIG_XEN_PCIDEV_BACKEND for the
fully featured backend driver.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20211028143620.144936-1-andr2000@gmail.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The flag xen_have_vcpu_info_placement was needed to support Xen
hypervisors older than version 3.4, which didn't support the
VCPUOP_register_vcpu_info hypercall. Today the Linux kernel requires
at least Xen 4.0 to be able to run, so xen_have_vcpu_info_placement
can be dropped (in theory the flag was used to ensure a working kernel
even in case of the VCPUOP_register_vcpu_info hypercall failing for
other reasons than the hypercall not being supported, but the only
cases covered by the flag would be parameter errors, which ought not
to be made anyway).
This allows to let some functions return void now, as they can never
fail.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20211028072748.29862-2-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
When moving away RAM pages, there having been a mapping of those is not
a proper indication that instead MMIO should be mapped there. At the
point in time this effectively covers the low megabyte only. Mapping of
that is, however, the job of init_mem_mapping(). Comparing the two one
can also spot that we've been wrongly (or at least inconsistently) using
PAGE_KERNEL_IO here.
Simply zap any such mappings instead.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/038b8c02-3621-d66a-63ae-982ccf67ae88@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Marking the page tableas pinned without ever actually pinning is was
probably an oversight in the first place. The main reason for the change
is more subtle, though: The write of the one present entry each here and
in the subsequently allocated L2 table engage a code path in the
hypervisor which exists only for thought-to-be-broken guests: An mmu-
update operation to a page which is neither a page table nor marked
writable. The hypervisor merely assumes (or should I say "hopes") that
the fact that a writable reference to the page can be obtained means it
is okay to actually write to that page in response to such a hypercall.
While there make all involved code and data dependent upon
X86_VSYSCALL_EMULATION (some code was already).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/1048f5b8-b726-dcc1-1216-9d5ac328ce82@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Using __native_set_fixmap() here means guaranteed trap-and-emulate
instances the hypervisor has to deal with. Since the virtual address
covered by the to be adjusted page table entry is easy to determine (and
actually already gets obtained in a special case), simply use an
available, easy to invoke hypercall instead.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/11fcaea2-ec17-3edd-ecdf-4cdd2d472bd0@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Commit f7c90c2aa4 ("x86/xen: don't write ptes directly in 32-bit PV
guests") needlessly (and heavily) penalized 64-bit guests here: The
majority of the early page table updates is to writable pages (which get
converted to r/o only after all the writes are done), in particular
those involved in building the direct map (which consists of all 4k
mappings in PV). On my test system this accounts for almost 16 million
hypercalls when each could simply have been a plain memory write.
Switch back to using native_set_pte(), except for updates of early
ioremap tables (where a suitable accessor exists to recognize them).
With 32-bit PV support gone, this doesn't need to be further
conditionalized (albeit backports thereof may need adjustment).
To avoid a fair number (almost 256k on my test system) of trap-and-
emulate cases appearing as a result, switch the hook in
xen_pagetable_init().
Finally commit d6b186c1e2 ("x86/xen: avoid m2p lookup when setting
early page table entries") inserted a function ahead of
xen_set_pte_init(), separating it from its comment (which may have been
part of the reason why the performance regression wasn't anticipated /
recognized while codeing / reviewing the change mentioned further up).
Move the function up and adjust that comment to describe the new
behavior.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/57ce1289-0297-e96e-79e1-cedafb5d9bf6@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
In preparation for restoring xen_set_pte_init()'s original behavior of
avoiding hypercalls, make set_pte_mfn() no longer use the standard
set_pte() code path. That one is more complicated than the alternative
of simply using an available hypercall directly. This way we can avoid
introducing a fair number (2k on my test system) of cases where the
hypervisor would trap-and-emulate page table updates.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/b39c08e8-4a53-8bca-e6e7-3684a6cab8d0@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
ltp test futex_wake04 without THP enabled leads to below bt:
[<ffffffff80a03728>] BUG+0x0/0x8
[<ffffffff80a0624c>] internal_get_user_pages_fast+0x81c/0x820
[<ffffffff8093ac18>] get_futex_key+0xa0/0x480
[<ffffffff8093b074>] futex_wait_setup+0x7c/0x1a8
[<ffffffff8093b2c0>] futex_wait+0x120/0x228
[<ffffffff8093dbe8>] do_futex+0x140/0xbd8
[<ffffffff8093e78c>] sys_futex+0x10c/0x1c0
[<ffffffff808703d0>] syscall_common+0x34/0x58
Move pmd_write() and pmd_page() from TRANSPARENT_HUGEPAGE scope to
MIPS_HUGE_TLB_SUPPORT scope, because both THP and HUGETLB will need
them.
Signed-off-by: Zhaolong Zhang <zhangzl2013@126.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
mips_cm_error_report() extracts the cause and other cause from the error
register using shifts. This works fine for the former, as it is stored
in the top bits, and the shift will thus remove all non-related bits.
However, the latter is stored in the bottom bits, hence thus needs masking
to get rid of non-related bits. Without such masking, using it as an
index into the cm2_causes[] array will lead to an out-of-bounds access,
probably causing a crash.
Fix this by using FIELD_GET() instead. Bite the bullet and convert all
MIPS CM handling to the bitfield API, to improve readability and safety.
Fixes: 3885c2b463 ("MIPS: CM: Add support for reporting CM cache errors")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Pull crypto updates from Herbert Xu:
"API:
- Delay boot-up self-test for built-in algorithms
Algorithms:
- Remove fallback path on arm64 as SIMD now runs with softirq off
Drivers:
- Add Keem Bay OCS ECC Driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (61 commits)
crypto: testmgr - fix wrong key length for pkcs1pad
crypto: pcrypt - Delay write to padata->info
crypto: ccp - Make use of the helper macro kthread_run()
crypto: sa2ul - Use the defined variable to clean code
crypto: s5p-sss - Add error handling in s5p_aes_probe()
crypto: keembay-ocs-ecc - Add Keem Bay OCS ECC Driver
dt-bindings: crypto: Add Keem Bay ECC bindings
crypto: ecc - Export additional helper functions
crypto: ecc - Move ecc.h to include/crypto/internal
crypto: engine - Add KPP Support to Crypto Engine
crypto: api - Do not create test larvals if manager is disabled
crypto: tcrypt - fix skcipher multi-buffer tests for 1420B blocks
hwrng: s390 - replace snprintf in show functions with sysfs_emit
crypto: octeontx2 - set assoclen in aead_do_fallback()
crypto: ccp - Fix whitespace in sev_cmd_buffer_len()
hwrng: mtk - Force runtime pm ops for sleep ops
crypto: testmgr - Only disable migration in crypto_disable_simd_for_test()
crypto: qat - share adf_enable_pf2vf_comms() from adf_pf2vf_msg.c
crypto: qat - extract send and wait from adf_vf2pf_request_version()
crypto: qat - add VF and PF wrappers to common send function
...
Pull audit updates from Paul Moore:
"Add some additional audit logging to capture the openat2() syscall
open_how struct info.
Previous variations of the open()/openat() syscalls allowed audit
admins to inspect the syscall args to get the information contained in
the new open_how struct used in openat2()"
* tag 'audit-pr-20211101' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: return early if the filter rule has a lower priority
audit: add OPENAT2 record to list "how" info
audit: add support for the openat2 syscall
audit: replace magic audit syscall class numbers with macros
lsm_audit: avoid overloading the "key" audit field
audit: Convert to SPDX identifier
audit: rename struct node to struct audit_node to prevent future name collisions
Pull RCU updates from Paul McKenney:
- Miscellaneous fixes
- Torture-test updates for smp_call_function(), most notably improved
checking of module parameters.
- Tasks-trace RCU updates that fix a number of rare but important
race-condition bugs.
- Other torture-test updates, most notably better checking of module
parameters. In addition, rcutorture may once again be run on
CONFIG_PREEMPT_RT kernels.
- Torture-test scripting updates, most notably specifying the new
CONFIG_KCSAN_STRICT kconfig option rather than maintaining an
ever-changing list of individual KCSAN kconfig options.
* tag 'rcu.2021.11.01a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (46 commits)
rcu: Fix rcu_dynticks_curr_cpu_in_eqs() vs noinstr
rcu: Always inline rcu_dynticks_task*_{enter,exit}()
torture: Make kvm-remote.sh print size of downloaded tarball
torture: Allot 1G of memory for scftorture runs
tools/rcu: Add an extract-stall script
scftorture: Warn on individual scf_torture_init() error conditions
scftorture: Count reschedule IPIs
scftorture: Account for weight_resched when checking for all zeroes
scftorture: Shut down if nonsensical arguments given
scftorture: Allow zero weight to exclude an smp_call_function*() category
rcu: Avoid unneeded function call in rcu_read_unlock()
rcu-tasks: Update comments to cond_resched_tasks_rcu_qs()
rcu-tasks: Fix IPI failure handling in trc_wait_for_one_reader
rcu-tasks: Fix read-side primitives comment for call_rcu_tasks_trace
rcu-tasks: Clarify read side section info for rcu_tasks_rude GP primitives
rcu-tasks: Correct comparisons for CPU numbers in show_stalled_task_trace
rcu-tasks: Correct firstreport usage in check_all_holdout_tasks_trace
rcu-tasks: Fix s/rcu_add_holdout/trc_add_holdout/ typo in comment
rcu-tasks: Move RTGS_WAIT_CBS to beginning of rcu_tasks_kthread() loop
rcu-tasks: Fix s/instruction/instructions/ typo in comment
...
Pull tracing updates from Steven Rostedt:
- kprobes: Restructured stack unwinder to show properly on x86 when a
stack dump happens from a kretprobe callback.
- Fix to bootconfig parsing
- Have tracefs allow owner and group permissions by default (only
denying others). There's been pressure to allow non root to tracefs
in a controlled fashion, and using groups is probably the safest.
- Bootconfig memory managament updates.
- Bootconfig clean up to have the tools directory be less dependent on
changes in the kernel tree.
- Allow perf to be traced by function tracer.
- Rewrite of function graph tracer to be a callback from the function
tracer instead of having its own trampoline (this change will happen
on an arch by arch basis, and currently only x86_64 implements it).
- Allow multiple direct trampolines (bpf hooks to functions) be batched
together in one synchronization.
- Allow histogram triggers to add variables that can perform
calculations against the event's fields.
- Use the linker to determine architecture callbacks from the ftrace
trampoline to allow for proper parameter prototypes and prevent
warnings from the compiler.
- Extend histogram triggers to key off of variables.
- Have trace recursion use bit magic to determine preempt context over
if branches.
- Have trace recursion disable preemption as all use cases do anyway.
- Added testing for verification of tracing utilities.
- Various small clean ups and fixes.
* tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (101 commits)
tracing/histogram: Fix semicolon.cocci warnings
tracing/histogram: Fix documentation inline emphasis warning
tracing: Increase PERF_MAX_TRACE_SIZE to handle Sentinel1 and docker together
tracing: Show size of requested perf buffer
bootconfig: Initialize ret in xbc_parse_tree()
ftrace: do CPU checking after preemption disabled
ftrace: disable preemption when recursion locked
tracing/histogram: Document expression arithmetic and constants
tracing/histogram: Optimize division by a power of 2
tracing/histogram: Covert expr to const if both operands are constants
tracing/histogram: Simplify handling of .sym-offset in expressions
tracing: Fix operator precedence for hist triggers expression
tracing: Add division and multiplication support for hist triggers
tracing: Add support for creating hist trigger variables from literal
selftests/ftrace: Stop tracing while reading the trace file by default
MAINTAINERS: Update KPROBES and TRACING entries
test_kprobes: Move it from kernel/ to lib/
docs, kprobes: Remove invalid URL and add new reference
samples/kretprobes: Fix return value if register_kretprobe() failed
lib/bootconfig: Fix the xbc_get_info kerneldoc
...
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-11-01
We've added 181 non-merge commits during the last 28 day(s) which contain
a total of 280 files changed, 11791 insertions(+), 5879 deletions(-).
The main changes are:
1) Fix bpf verifier propagation of 64-bit bounds, from Alexei.
2) Parallelize bpf test_progs, from Yucong and Andrii.
3) Deprecate various libbpf apis including af_xdp, from Andrii, Hengqi, Magnus.
4) Improve bpf selftests on s390, from Ilya.
5) bloomfilter bpf map type, from Joanne.
6) Big improvements to JIT tests especially on Mips, from Johan.
7) Support kernel module function calls from bpf, from Kumar.
8) Support typeless and weak ksym in light skeleton, from Kumar.
9) Disallow unprivileged bpf by default, from Pawan.
10) BTF_KIND_DECL_TAG support, from Yonghong.
11) Various bpftool cleanups, from Quentin.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (181 commits)
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
bpf: Factor out helpers for ctx access checking
bpf: Factor out a helper to prepare trampoline for struct_ops prog
selftests, bpf: Fix broken riscv build
riscv, libbpf: Add RISC-V (RV64) support to bpf_tracing.h
tools, build: Add RISC-V to HOSTARCH parsing
riscv, bpf: Increase the maximum number of iterations
selftests, bpf: Add one test for sockmap with strparser
selftests, bpf: Fix test_txmsg_ingress_parser error
...
====================
Link: https://lore.kernel.org/r/20211102013123.9005-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull spi updates from Mark Brown:
"This is quite a quiet release for SPI, there's been a bit of cleanup
to the core from Uwe but nothing functionality wise.
We have added several new drivers, Cadence XSPI, Ingenic JZ47xx,
Qualcomm SC7280 and SC7180 and Xilinx Versal OSPI"
* tag 'spi-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (41 commits)
spi: Convert NXP flexspi to json schema
spi: spi-geni-qcom: Add support for GPI dma
spi: fsi: Fix contention in the FSI2SPI engine
spi: spi-rpc-if: Check return value of rpcif_sw_init()
spi: tegra210-quad: Put device into suspend on driver removal
spi: tegra20-slink: Put device into suspend on driver removal
spi: bcm-qspi: Fix missing clk_disable_unprepare() on error in bcm_qspi_probe()
spi: at91-usart: replacing legacy gpio interface for gpiod
spi: replace snprintf in show functions with sysfs_emit
spi: cadence: Add of_node_put() before return
spi: orion: Add of_node_put() before goto
spi: cadence-quadspi: fix dma_unmap_single() call
spi: tegra20: fix build with CONFIG_PM_SLEEP=n
spi: bcm-qspi: add support for 3-wire mode for half duplex transfer
spi: bcm-qspi: Add mspi spcr3 32/64-bits xfer mode
spi: Make several public functions private to spi.c
spi: Reorder functions to simplify the next commit
spi: Remove unused function spi_busnum_to_master()
spi: Move comment about chipselect check to the right place
spi: fsi: Print status on error
...
Pull fallthrough fixes from Gustavo A. R. Silva:
"Fix some fall-through warnings when building with Clang and
-Wimplicit-fallthrough"
* tag 'fallthrough-fixes-clang-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
pcmcia: db1xxx_ss: Fix fall-through warning for Clang
MIPS: Fix fall-through warnings for Clang
scsi: st: Fix fall-through warning for Clang
Pull hardening fixes and cleanups from Gustavo A. R. Silva:
"Various hardening fixes and cleanups that I've been collecting during
the last development cycle:
Fix -Wcast-function-type error:
- firewire: Remove function callback casts (Oscar Carter)
Fix application of sizeof operator:
- firmware/psci: fix application of sizeof to pointer (jing yangyang)
Replace open coded instances with size_t saturating arithmetic
helpers:
- assoc_array: Avoid open coded arithmetic in allocator arguments
(Len Baker)
- writeback: prefer struct_size over open coded arithmetic (Len
Baker)
- aio: Prefer struct_size over open coded arithmetic (Len Baker)
- dmaengine: pxa_dma: Prefer struct_size over open coded arithmetic
(Len Baker)
Flexible array transformation:
- KVM: PPC: Replace zero-length array with flexible array member (Len
Baker)
Use 2-factor argument multiplication form:
- nouveau/svm: Use kvcalloc() instead of kvzalloc() (Gustavo A. R.
Silva)
- xfs: Use kvcalloc() instead of kvzalloc() (Gustavo A. R. Silva)"
* tag 'kspp-misc-fixes-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
firewire: Remove function callback casts
nouveau/svm: Use kvcalloc() instead of kvzalloc()
firmware/psci: fix application of sizeof to pointer
dmaengine: pxa_dma: Prefer struct_size over open coded arithmetic
KVM: PPC: Replace zero-length array with flexible array member
aio: Prefer struct_size over open coded arithmetic
writeback: prefer struct_size over open coded arithmetic
xfs: Use kvcalloc() instead of kvzalloc()
assoc_array: Avoid open coded arithmetic in allocator arguments
Pull seccomp updates from Kees Cook:
"These are x86-specific, but I carried these since they're also
seccomp-specific.
This flips the defaults for spec_store_bypass_disable and
spectre_v2_user from "seccomp" to "prctl", as enough time has passed
to allow system owners to have updated the defensive stances of their
various workloads, and it's long overdue to unpessimize seccomp
threads.
Extensive rationale and details are in Andrea's main patch.
Summary:
- set spec_store_bypass_disable & spectre_v2_user to prctl (Andrea Arcangeli)"
* tag 'seccomp-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
x86: deduplicate the spectre_v2_user documentation
x86: change default to spec_store_bypass_disable=prctl spectre_v2_user=prctl
Pull overflow updates from Kees Cook:
"The end goal of the current buffer overflow detection work[0] is to
gain full compile-time and run-time coverage of all detectable buffer
overflows seen via array indexing or memcpy(), memmove(), and
memset(). The str*() family of functions already have full coverage.
While much of the work for these changes have been on-going for many
releases (i.e. 0-element and 1-element array replacements, as well as
avoiding false positives and fixing discovered overflows[1]), this
series contains the foundational elements of several related buffer
overflow detection improvements by providing new common helpers and
FORTIFY_SOURCE changes needed to gain the introspection required for
compiler visibility into array sizes. Also included are a handful of
already Acked instances using the helpers (or related clean-ups), with
many more waiting at the ready to be taken via subsystem-specific
trees[2].
The new helpers are:
- struct_group() for gaining struct member range introspection
- memset_after() and memset_startat() for clearing to the end of
structures
- DECLARE_FLEX_ARRAY() for using flex arrays in unions or alone in
structs
Also included is the beginning of the refactoring of FORTIFY_SOURCE to
support memcpy() introspection, fix missing and regressed coverage
under GCC, and to prepare to fix the currently broken Clang support.
Finishing this work is part of the larger series[0], but depends on
all the false positives and buffer overflow bug fixes to have landed
already and those that depend on this series to land.
As part of the FORTIFY_SOURCE refactoring, a set of both a
compile-time and run-time tests are added for FORTIFY_SOURCE and the
mem*()-family functions respectively. The compile time tests have
found a legitimate (though corner-case) bug[6] already.
Please note that the appearance of "panic" and "BUG" in the
FORTIFY_SOURCE refactoring are the result of relocating existing code,
and no new use of those code-paths are expected nor desired.
Finally, there are two tree-wide conversions for 0-element arrays and
flexible array unions to gain sane compiler introspection coverage
that result in no known object code differences.
After this series (and the changes that have now landed via netdev and
usb), we are very close to finally being able to build with
-Warray-bounds and -Wzero-length-bounds.
However, due corner cases in GCC[3] and Clang[4], I have not included
the last two patches that turn on these options, as I don't want to
introduce any known warnings to the build. Hopefully these can be
solved soon"
Link: https://lore.kernel.org/lkml/20210818060533.3569517-1-keescook@chromium.org/ [0]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/log/?qt=grep&q=FORTIFY_SOURCE [1]
Link: https://lore.kernel.org/lkml/202108220107.3E26FE6C9C@keescook/ [2]
Link: https://lore.kernel.org/lkml/3ab153ec-2798-da4c-f7b1-81b0ac8b0c5b@roeck-us.net/ [3]
Link: https://bugs.llvm.org/show_bug.cgi?id=51682 [4]
Link: https://lore.kernel.org/lkml/202109051257.29B29745C0@keescook/ [5]
Link: https://lore.kernel.org/lkml/20211020200039.170424-1-keescook@chromium.org/ [6]
* tag 'overflow-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (30 commits)
fortify: strlen: Avoid shadowing previous locals
compiler-gcc.h: Define __SANITIZE_ADDRESS__ under hwaddress sanitizer
treewide: Replace 0-element memcpy() destinations with flexible arrays
treewide: Replace open-coded flex arrays in unions
stddef: Introduce DECLARE_FLEX_ARRAY() helper
btrfs: Use memset_startat() to clear end of struct
string.h: Introduce memset_startat() for wiping trailing members and padding
xfrm: Use memset_after() to clear padding
string.h: Introduce memset_after() for wiping trailing members/padding
lib: Introduce CONFIG_MEMCPY_KUNIT_TEST
fortify: Add compile-time FORTIFY_SOURCE tests
fortify: Allow strlen() and strnlen() to pass compile-time known lengths
fortify: Prepare to improve strnlen() and strlen() warnings
fortify: Fix dropped strcpy() compile-time write overflow check
fortify: Explicitly disable Clang support
fortify: Move remaining fortify helpers into fortify-string.h
lib/string: Move helper functions out of string.c
compiler_types.h: Remove __compiletime_object_size()
cm4000_cs: Use struct_group() to zero struct cm4000_dev region
can: flexcan: Use struct_group() to zero struct flexcan_regs regions
...
