The trap vector marked by label .Lsecondary_park must align on a
4-byte boundary, as the {m,s}tvec is defined to require 4-byte
alignment.
Signed-off-by: Chen Lu <181250012@smail.nju.edu.cn>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Fixes: e011995e82 ("RISC-V: Move relocate and few other functions out of __init")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Pull nds32 tracing fix from Steven Rostedt:
"Fix nds32le build when DYNAMIC_FTRACE is disabled
A randconfig found that nds32le architecture fails to build due to a
prototype mismatch between a ftrace function pointer and the function
it was to be assigned to. That function pointer prototype missed being
updated when all the ftrace callbacks were updated"
* tag 'trace-v5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace/nds32: Update the proto for ftrace_trace_function to match ftrace_stub
Pull nios2 fix from Dinh Nguyen:
"Fix a build error for allmodconfig"
* tag 'nios2_fixes_for_v5.15_part3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
nios2: Make NIOS2_DTB_SOURCE_BOOL depend on !COMPILE_TEST
If the guest requests string I/O from the hypervisor via VMGEXIT,
SW_EXITINFO2 will contain the REP count. However, sev_es_string_io
was incorrectly treating it as the size of the GHCB buffer in
bytes.
This fixes the "outsw" test in the experimental SEV tests of
kvm-unit-tests.
Cc: stable@vger.kernel.org
Fixes: 7ed9abfe8e ("KVM: SVM: Support string IO operations for an SEV-ES guest")
Reported-by: Marc Orr <marcorr@google.com>
Tested-by: Marc Orr <marcorr@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
nios2:allmodconfig builds fail with
make[1]: *** No rule to make target 'arch/nios2/boot/dts/""',
needed by 'arch/nios2/boot/dts/built-in.a'. Stop.
make: [Makefile:1868: arch/nios2/boot/dts] Error 2 (ignored)
This is seen with compile tests since those enable NIOS2_DTB_SOURCE_BOOL,
which in turn enables NIOS2_DTB_SOURCE. This causes the build error
because the default value for NIOS2_DTB_SOURCE is an empty string.
Disable NIOS2_DTB_SOURCE_BOOL for compile tests to avoid the error.
Fixes: 2fc8483fdc ("nios2: Build infrastructure")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Building tqm8541_defconfig results in:
arch/powerpc/mm/nohash/fsl_book3e.c: In function 'settlbcam':
arch/powerpc/mm/nohash/fsl_book3e.c:126:40: error: '_PAGE_BAP_SX' undeclared (first use in this function)
126 | TLBCAM[index].MAS3 |= (flags & _PAGE_BAP_SX) ? MAS3_SX : 0;
| ^~~~~~~~~~~~
arch/powerpc/mm/nohash/fsl_book3e.c:126:40: note: each undeclared identifier is reported only once for each function it appears in
make[3]: *** [scripts/Makefile.build:277: arch/powerpc/mm/nohash/fsl_book3e.o] Error 1
make[2]: *** [scripts/Makefile.build:540: arch/powerpc/mm/nohash] Error 2
make[1]: *** [scripts/Makefile.build:540: arch/powerpc/mm] Error 2
make: *** [Makefile:1868: arch/powerpc] Error 2
This is because _PAGE_BAP_SX is not defined when using 32 bits PTE.
Now that _PAGE_EXEC contains both _PAGE_BAP_SX and _PAGE_BAP_UX, it can be used instead.
Fixes: 01116e6e98 ("powerpc/fsl_booke: Take exec flag into account when setting TLBCAMs")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/91a0235e7f2a85308b84aa5b9efd8d022e2b899a.1635226743.git.christophe.leroy@csgroup.eu
set_memory_x() calls pte_mkexec() which sets _PAGE_EXEC.
set_memory_nx() calls pte_exprotec() which clears _PAGE_EXEC.
Book3e has 2 bits, UX and SX, which defines the exec rights
resp. for user (PR=1) and for kernel (PR=0).
_PAGE_EXEC is defined as UX only.
An executable kernel page is set with either _PAGE_KERNEL_RWX
or _PAGE_KERNEL_ROX, which both have SX set and UX cleared.
So set_memory_nx() call for an executable kernel page does
nothing because UX is already cleared.
And set_memory_x() on a non-executable kernel page makes it
executable for the user and keeps it non-executable for kernel.
Also, pte_exec() always returns 'false' on kernel pages, because
it checks _PAGE_EXEC which doesn't include SX, so for instance
the W+X check doesn't work.
To fix this:
- change tlb_low_64e.S to use _PAGE_BAP_UX instead of _PAGE_USER
- sets both UX and SX in _PAGE_EXEC so that pte_exec() returns
true whenever one of the two bits is set and pte_exprotect()
clears both bits.
- Define a book3e specific version of pte_mkexec() which sets
either SX or UX based on UR.
Fixes: 1f9ad21c3b ("powerpc/mm: Implement set_memory() routines")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c41100f9c144dc5b62e5a751b810190c6b5d42fd.1635226743.git.christophe.leroy@csgroup.eu
Commit 26973fa5ac ("powerpc/mm: use pte helpers in generic code")
changed those two functions to use pte helpers to determine which
bits to clear and which bits to set.
This change was based on the assumption that bits to be set/cleared
are always the same and can be determined by applying the pte
manipulation helpers on __pte(0).
But on platforms like book3e, the bits depend on whether the page
is a user page or not.
For the time being it more or less works because of _PAGE_EXEC being
used for user pages only and exec right being set at all time on
kernel page. But following patch will clean that and output of
pte_mkexec() will depend on the page being a user or kernel page.
Instead of trying to make an even more complicated helper where bits
would become dependent on the final pte value, come back to a more
static situation like before commit 26973fa5ac ("powerpc/mm: use
pte helpers in generic code"), by introducing an 8xx specific
version of __ptep_set_access_flags() and ptep_set_wrprotect().
Fixes: 26973fa5ac ("powerpc/mm: use pte helpers in generic code")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/922bdab3a220781bae2360ff3dd5adb7fe4d34f1.1635226743.git.christophe.leroy@csgroup.eu
Running program with bpf-to-bpf function calls results in data access
exception (0x300) with the below call trace:
bpf_int_jit_compile+0x238/0x750 (unreliable)
bpf_check+0x2008/0x2710
bpf_prog_load+0xb00/0x13a0
__sys_bpf+0x6f4/0x27c0
sys_bpf+0x2c/0x40
system_call_exception+0x164/0x330
system_call_vectored_common+0xe8/0x278
as bpf_int_jit_compile() tries writing to write protected JIT code
location during the extra pass.
Fix it by holding off write protection of JIT code until the extra
pass, where branch target addresses fixup happens.
Fixes: 62e3d4210a ("powerpc/bpf: Write protect JIT code")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211025055649.114728-1-hbathini@linux.ibm.com
At the moment, all the Minis running Linux have the same MAC
address (00:10:18:00:00:00), which is a bit annoying.
Expose the PCI node corresponding to the Ethernet device, and
declare a 'local-mac-address' property. The bootloader will update
it (m1n1 already has the required feature). And if it doesn't, then
the default value is already present in the DT.
This relies on forcing the bus number for each port so that the
endpoints connected to them are correctly numbered (and keeps dtc
quiet).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Add the interrupt-map properties that are required for INTx
signalling.
Tested-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
PCIe on the Apple M1 (aka t8103) requires the use of IOMMUs (aka
DARTs). Add the three instances that deal with the internal PCIe
ports and route each port's traffic through its DART.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
The check_return_regs_valid() can cause a false positive if the return
regs are marked as norestart and they are an HSRR type interrupt,
because the low bit in the bottom of regs->trap causes interrupt type
matching to fail.
This can occcur for example on bare metal with a HV privileged doorbell
interrupt that causes a signal, but do_signal returns early because
get_signal() fails, and takes the "No signal to deliver" path. In this
case no signal was delivered so the return location is not changed so
return SRRs are not invalidated, yet set_trap_norestart is called, which
messes up the match. Building go-1.16.6 is known to reproduce this.
Fix it by using the TRAP() accessor which masks out the low bit.
Fixes: 6eaaf9de35 ("powerpc/64s/interrupt: Check and fix srr_valid without crashing")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211026122531.3599918-1-npiggin@gmail.com
While trying to build a simple Image for ACADIA platform, I got the
following error:
WRAP arch/powerpc/boot/simpleImage.acadia
INFO: Uncompressed kernel (size 0x6ae7d0) overlaps the address of the wrapper(0x400000)
INFO: Fixing the link_address of wrapper to (0x700000)
powerpc64-linux-gnu-ld : mode d'émulation non reconnu : -T
Émulations prises en charge : elf64ppc elf32ppc elf32ppclinux elf32ppcsim elf64lppc elf32lppc elf32lppclinux elf32lppcsim
make[1]: *** [arch/powerpc/boot/Makefile:424 : arch/powerpc/boot/simpleImage.acadia] Erreur 1
make: *** [arch/powerpc/Makefile:285 : simpleImage.acadia] Erreur 2
Trying again with V=1 shows the following command
powerpc64-linux-gnu-ld -m -T arch/powerpc/boot/zImage.lds -Ttext 0x700000 --no-dynamic-linker -o arch/powerpc/boot/simpleImage.acadia -Map wrapper.map arch/powerpc/boot/fixed-head.o arch/powerpc/boot/simpleboot.o ./zImage.3278022.o arch/powerpc/boot/wrapper.a
The argument of '-m' is missing.
This is due to the wrapper script calling 'objdump -p vmlinux' and
looking for 'file format', whereas the output of objdump is:
vmlinux: format de fichier elf32-powerpc
En-tête de programme:
LOAD off 0x00010000 vaddr 0xc0000000 paddr 0x00000000 align 2**16
filesz 0x0069e1d4 memsz 0x006c128c flags rwx
NOTE off 0x0064591c vaddr 0xc063591c paddr 0x0063591c align 2**2
filesz 0x00000054 memsz 0x00000054 flags ---
Add LC_ALL=C at the beginning of the wrapper script in order to get the
output expected by the script:
vmlinux: file format elf32-powerpc
Program Header:
LOAD off 0x00010000 vaddr 0xc0000000 paddr 0x00000000 align 2**16
filesz 0x0069e1d4 memsz 0x006c128c flags rwx
NOTE off 0x0064591c vaddr 0xc063591c paddr 0x0063591c align 2**2
filesz 0x00000054 memsz 0x00000054 flags ---
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a9ff3bc98035f63b122c051f02dc47c7aed10430.1635256089.git.christophe.leroy@csgroup.eu
For 64-bit book3s the default should be 64K as that's what modern CPUs
are designed for.
The following defconfigs already set CONFIG_PPC_64K_PAGES:
cell_defconfig
pasemi_defconfig
powernv_defconfig
ppc64_defconfig
pseries_defconfig
skiroot_defconfig
The have the option removed from the defconfig, as it is now the
default.
The defconfigs that now need to set CONFIG_PPC_4K_PAGES to maintain
their existing behaviour are:
g5_defconfig
maple_defconfig
microwatt_defconfig
ps3_defconfig
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
BugLink: https://github.com/linuxppc/issues/issues/109
Link: https://lore.kernel.org/r/20211015001649.45591-1-joel@jms.id.au
This reverts commit 566af8cda3.
This caused some conflicts vs the audit tree, and the audit maintainers
would prefer we postpone this to the next merge window so we have more
time for testing.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The early malloc() and free() implementation in include/linux/decompress/mm.h
(which is also included by the static decompressors) is static. This is
fine when the only thing interested in using malloc() is the decompression
code, but the x86 early boot environment may use malloc() in a couple places,
leading to a potential collision when the static copies of the available
memory region ("malloc_ptr") gets reset to the global "free_mem_ptr" value.
As it happened, the existing usage pattern was accidentally safe because each
user did 1 malloc() and 1 free() before returning and were not nested:
extract_kernel() (misc.c)
choose_random_location() (kaslr.c)
mem_avoid_init()
handle_mem_options()
malloc()
...
free()
...
parse_elf() (misc.c)
malloc()
...
free()
Once the future FGKASLR series is added, however, it will insert
additional malloc() calls local to fgkaslr.c in the middle of
parse_elf()'s malloc()/free() pair:
parse_elf() (misc.c)
malloc()
if (...) {
layout_randomized_image(output, &ehdr, phdrs);
malloc() <- boom
...
else
layout_image(output, &ehdr, phdrs);
free()
To avoid collisions, there must be a single implementation of malloc().
Adjust include/linux/decompress/mm.h so that visibility can be
controlled, provide prototypes in misc.h, and implement the functions in
misc.c. This also results in a small size savings:
$ size vmlinux.before vmlinux.after
text data bss dec hex filename
8842314 468 178320 9021102 89a6ae vmlinux.before
8842240 468 178320 9021028 89a664 vmlinux.after
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211013175742.1197608-4-keescook@chromium.org
Under earlyprintk, each RNG call produces a debug report line. To support
the future FGKASLR feature, which will fetch random bytes during function
shuffling, this is not useful information (each line is identical and
tells us nothing new), needlessly spamming the console. Instead, allow
for a NULL "purpose" to suppress the debug reporting.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20211013175742.1197608-3-keescook@chromium.org
While the relocs tool already supports finding the total number of
section headers if vmlinux exceeds 64K sections, it fails to read the
extended symbol table to get section header indexes for symbols, causing
incorrect symbol table indexes to be used when there are > 64K symbols.
Parse the ELF file to read the extended symbol table info, and then
replace all direct references to st_shndx with calls to sym_index(),
which will determine whether the value can be read directly or whether
the value should be pulled out of the extended table.
This is needed for future FGKASLR support, which uses a separate section
per function.
Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20211013175742.1197608-2-keescook@chromium.org
The diag 318 data contains values that denote information regarding the
guest's environment. Currently, it is unecessarily difficult to observe
this value (either manually-inserted debug statements, gdb stepping, mem
dumping etc). It's useful to observe this information to obtain an
at-a-glance view of the guest's environment, so lets add a simple VCPU
event that prints the CPNC to the s390dbf logs.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lore.kernel.org/r/20211027025451.290124-1-walling@linux.ibm.com
[borntraeger@de.ibm.com]: change debug level to 3
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Introduce variants of the convert and destroy page functions that also
clear the PG_arch_1 bit used to mark them as secure pages.
The PG_arch_1 flag is always allowed to overindicate; using the new
functions introduced here allows to reduce the extent of overindication
and thus improve performance.
These new functions can only be called on pages for which a reference
is already being held.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lore.kernel.org/r/20210920132502.36111-7-imbrenda@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If handle_sske cannot set the storage key, because there is no
page table entry or no present large page entry, it calls
fixup_user_fault.
However, currently, if the call succeeds, handle_sske returns
-EAGAIN, without having set the storage key.
Instead, retry by continue'ing the loop without incrementing the
address.
The same issue in handle_pfmf was fixed by
a11bdb1a6b ("KVM: s390: Fix pfmf and conditional skey emulation").
Fixes: bd096f6443 ("KVM: s390: Add skey emulation fault handling")
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20211022152648.26536-1-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The Ux500 PRCC (peripheral reset and clock controller) can also
control reset of the IP blocks, not just clocks. As the PRCC is probed
as a clock controller and we have other platforms implementing combined
clock and reset controllers, follow this pattern and implement the PRCC
rest controller as part of the clock driver.
The reset controller needs to be selected from the machine as Ux500 has
traditionally selected its mandatory subsystem prerequisites from there.
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210921184803.1757916-2-linus.walleij@linaro.org
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
[sboyd@kernel.org: Dropped allocation error message]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
It seems that something is wrong when patch "riscv/vdso:
Refactor asm/vdso.h" is merged.
Let's fix the merge issue.
Fixes: 8edab02386 ("Merge remote-tracking branch 'palmer/riscv-vdso-cleanup' into for-next")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Pull ARM SoC fixes from Arnd Bergmann:
"One last set of small fixes for the soc tree:
- Incorrect ethernet phy settings found on i.mx and allwinner
platforms
- a revert for a Qualcomm DT change that caused a boot regression
- four patches for incorrect settings in i.MX DT files
- new MAINTAINER file entries for dhcom boards
- a Kconfig fix for a reset driver that became unselectable
- three more code changes for bugs in reset drivers"
* tag 'arm-soc-fixes-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Add maintainers for DHCOM i.MX6 and DHCOM/DHCOR STM32MP1
Revert "arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target"
arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHY
arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequency
arm64: dts: imx8mm-kontron: Fix polarity of reg_rst_eth2
arm64: dts: imx8mm-kontron: Set lower limit of VDD_SNVS to 800 mV
arm64: dts: imx8mm-kontron: Make sure SOC and DRAM supply voltages are correct
reset: socfpga: add empty driver allowing consumers to probe
reset: tegra-bpmp: Handle errors in BPMP response
reset: pistachio: Re-enable driver selection
reset: brcmstb-rescal: fix incorrect polarity of status bit
ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode
arm64: dts: allwinner: h5: NanoPI Neo 2: Fix ethernet node
Daniel Borkmann says:
====================
pull-request: bpf 2021-10-26
We've added 12 non-merge commits during the last 7 day(s) which contain
a total of 23 files changed, 118 insertions(+), 98 deletions(-).
The main changes are:
1) Fix potential race window in BPF tail call compatibility check, from Toke Høiland-Jørgensen.
2) Fix memory leak in cgroup fs due to missing cgroup_bpf_offline(), from Quanyang Wang.
3) Fix file descriptor reference counting in generic_map_update_batch(), from Xu Kuohai.
4) Fix bpf_jit_limit knob to the max supported limit by the arch's JIT, from Lorenz Bauer.
5) Fix BPF sockmap ->poll callbacks for UDP and AF_UNIX sockets, from Cong Wang and Yucong Sun.
6) Fix BPF sockmap concurrency issue in TCP on non-blocking sendmsg calls, from Liu Jian.
7) Fix build failure of INODE_STORAGE and TASK_STORAGE maps on !CONFIG_NET, from Tejun Heo.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix potential race in tail call compatibility check
bpf: Move BPF_MAP_TYPE for INODE_STORAGE and TASK_STORAGE outside of CONFIG_NET
selftests/bpf: Use recv_timeout() instead of retries
net: Implement ->sock_is_readable() for UDP and AF_UNIX
skmsg: Extract and reuse sk_msg_is_readable()
net: Rename ->stream_memory_read to ->sock_is_readable
tcp_bpf: Fix one concurrency problem in the tcp_bpf_send_verdict function
cgroup: Fix memory leak caused by missing cgroup_bpf_offline
bpf: Fix error usage of map_fd and fdget() in generic_map_update_batch()
bpf: Prevent increasing bpf_jit_limit above max
bpf: Define bpf_jit_alloc_exec_limit for arm64 JIT
bpf: Define bpf_jit_alloc_exec_limit for riscv JIT
====================
Link: https://lore.kernel.org/r/20211026201920.11296-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently there's a limit of 8MB for the .text section of a RISC-V
image in the XIP case. This breaks compilation of many automatic
builds and is generally inconvenient. This patch removes that
limitation and optimizes XIP image file size at the same time.
Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add a test case for stacktrace from kretprobe handler and
nested kretprobe handlers.
This test checks both of stack trace inside kretprobe handler
and stack trace from pt_regs. Those stack trace must include
actual function return address instead of kretprobe trampoline.
The nested kretprobe stacktrace test checks whether the unwinder
can correctly unwind the call frame on the stack which has been
modified by the kretprobe.
Since the stacktrace on kretprobe is correctly fixed only on x86,
this introduces a meta kconfig ARCH_CORRECT_STACKTRACE_ON_KRETPROBE
which tells user that the stacktrace on kretprobe is correct or not.
The test results will be shown like below;
TAP version 14
1..1
# Subtest: kprobes_test
1..6
ok 1 - test_kprobe
ok 2 - test_kprobes
ok 3 - test_kretprobe
ok 4 - test_kretprobes
ok 5 - test_stacktrace_on_kretprobe
ok 6 - test_stacktrace_on_nested_kretprobe
# kprobes_test: pass:6 fail:0 skip:0 total:6
# Totals: pass:6 fail:0 skip:0 total:6
ok 1 - kprobes_test
Link: https://lkml.kernel.org/r/163516211244.604541.18350507860972214415.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Using the linker script to fix an issue where some archs call the
function tracer with just the ip (instruction pointer) and pip (parent
instruction pointer) where as more up to date archs also pass in the
associated ftrace_ops and the ftrace_regs pointer, the generic code
will be called either with two parameters or four. To avoid any C
undefined behavior of calling two parameters to four or four to two
parameter function, two functions are created, where a preprocessor
macro uses the one that matches the architecture. As the function
pointers for them may be different, a typecast is used. But this
triggers issues with newer compilers that will fail due to -Werror.
A linker trick is now used to map the generic function to the function
that is used (note the generic function is only used to set the default
function callback). The linker trick defines ftrace_ops_list_func (the
generic function) to arch_ftrace_ops_list_func (the arch defined one).
Link: https://lore.kernel.org/all/20200617165616.52241bde@oasis.local.home/
But this fails sh arch because their linker script is included in their
compressed image that does not define arch_ftrace_ops_list_func at all
sh4-linux-ld:arch/sh/boot/compressed/../../kernel/vmlinux.lds:32: undefined symbol `arch_ftrace_ops_list_func' referenced in expression
Included a stub by that name in the misc.c to allow the code to
compile and link, even though it's not used.
This is similar to what was done for ftrace_stub:
b83b43ffc6 ("fgraph: Fix function type mismatches of
ftrace_graph_return using ftrace_stub")
Link: https://lkml.kernel.org/r/20211021221627.5d7270de@rorschach.local.home
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Qualcomm ARM64 DTS additional patches for v5.16
The RPM and RPMh sleep stats are introduced on a number of platforms, to
aid the enablement of entering low power mode.
The MSM8916 support receives some polishing touches, followed by
introduction of the necessary pieces to use the DeviceTree on 32-bit
variants of the MSM8916 platform, in particular to boot the secondary
CPUs. Based on this support for the Samsung Galaxy S4 Mini Value Edition
is introduced.
The Asus Zenfone 2 Laser gained touchscreen, sensors and sdcard support.
MSM8996 got support for the its crypto hardware and the Xiaomi Mi 5
gained a description of its LCD panel.
The Trogdor device on SC7180 gained support for a second source eDP
brigde, while SC7280 gains PCIe support and the newly introduced
Herobrine device.
Both MSM8916 and SDM845 has their standalong SMEM node dropped, in favour
of the newly introduced support for specifying the compatible directly
on the reserved-memory node.
The SM7225 platform is introduced, as a derrivative of SM6350, initial
support for the PM6350 PMIC and based on this the Fairphone 4 is
introduced.
The RB3 and RB5 devices gains msm-id and board-id, to allow the two DTBs
to be baked into a single boot.img that can be booted on both devices.
As the GDSC driver has been extended to properly describe the
relationship between MMCX and MDSS_GDSC, the now deprecated mmcx
regulator is removed from SM8250.
SM8350 gained CPU topology, idle-states and fastrpc support. FastRPC was
also added for SM8150 and the SA8155p ADP got a couple of remoteprocs
enabled.
Additionally a number of DT validation issues was corrected across the
various platforms and devices.
* tag 'qcom-arm64-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (77 commits)
Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors"
arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node
arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property
arm64: dts: qcom: sm8350: Add CPU topology and idle-states
arm64: dts: qcom: Drop unneeded extra device-specific includes
arm64: dts: qcom: msm8916: Drop standalone smem node
arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes
arm64: dts: qcom: msm8916-asus-z00l: Add sensors
arm64: dts: qcom: msm8916-asus-z00l: Add SDCard
arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen
arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node
arm64: dts: qcom: sdm845: Fix Qualcomm crypto engine bus clock
arm64: dts: qcom: msm8996: Add device tree entries to support crypto engine
arm64: dts: qcom: msm8996: move clock-frequency from PN547 NFC to I2C bus
arm64: dts: qcom: msm8916-asus-z00l: Add sensors
arm64: dts: qcom: sdm630: Add disabled Venus support
arm64: dts: qcom: pm660l: Remove board-specific WLED configuration
arm64: dts: qcom: Move WLED num-strings from pmi8994 to sony-xperia-tone
arm64: dts: qcom: pmi8994: Remove hardcoded linear WLED enabled-strings
arm64: dts: qcom: pmi8994: Fix "eternal"->"external" typo in WLED node
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm ARM64 defconfig updates for v5.16
The major change here is the disabling of the firmware loades user space
fallback, this is done as arm64 is the only platform with this flag
enabled and as a result doesn't play nice with standard distributions.
It then enables the new limits driver, which controls the hardware based
thermal mitigation on a range of Qualcomm platforms. The prima/pronto
WiFi and Bluetooth drivers are enabled to ensure these features works
out of the box, now that the last details in the dts are landed.
The new driver for acquiring sleep stats is enabled to facilitate the
various efforts on getting these platforms into low power mode.
Lastly the base SC7280 drivers needed to simply boot this platform are
enabled.
* tag 'qcom-arm64-defconfig-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm LMH driver
arm64: defconfig: Enable Qualcomm prima/pronto drivers
arm64: defconfig: Enable Sleep stats driver
arm64: defconfig: Enable QTI SC7280 pinctrl, gcc and interconnect
arm64: defconfig: Disable firmware sysfs fallback
Link: https://lore.kernel.org/r/20211026134953.1204327-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
AT91 DT #2 for 5.16:
- Add DT nodes for TCB and RTC blocks on SAMA7G5
- Add TCB0 for clocksource and clockevent functionality fallback only in
case PIT64B will fail to probe and as a testbed for this feature on
the Evaluation Kit.
* tag 'at91-dt-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama7g5-ek: use blocks 0 and 1 of TCB0 as cs and ce
ARM: dts: at91: sama7g5: add tcb nodes
ARM: dts: at91: sama7g5: add rtc node
Link: https://lore.kernel.org/r/20211025163428.26285-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
More Qualcomm driver updates for v5.16
This introduces the Qualcomm "sleep stats" driver, which aids the
efforts of bringing various Qualcomm platforms into low power mode.
The SMP2P driver gains support for negotiating the "SSR" feature, which
is used to better synchronize some corner cases that might appear as the
remoteproc is recovering from a crash.
The socinfo driver learns about a few new PMICs.
SMEM is updated so that it's possible to put the compatible property
directly in the reserved-memory node, to avoid having to have a separate
node just pointing to the memory-region.
Lastly it fixes some bugs in smp2p, apr, rpmhpd drivers, notably
avoiding the issue where powering on a power-domain using rpmhpd while
keeping the performance_state at 0 is a nop
* tag 'qcom-drivers-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom: scm: Don't break compile test on non-ARM platforms
soc: qcom: smp2p: Add of_node_put() before goto
soc: qcom: apr: Add of_node_put() before return
soc: qcom: qcom_stats: Fix client votes offset
soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
firmware: qcom: scm: Add support for MC boot address API
soc: qcom: spm: Add 8916 SPM register data
dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
soc: qcom: socinfo: Add PM8150C and SMB2351 models
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
soc: qcom: smp2p: add feature negotiation and ssr ack feature support
soc: qcom: Add Sleep stats driver
dt-bindings: Introduce QCOM Sleep stats bindings
soc: qcom: socinfo: add two missing PMIC IDs
soc: qcom: rpmhpd: Make power_on actually enable the domain
soc: qcom: smem: Support reserved-memory description
dt-bindings: soc: smem: Make indirection optional
dt-bindings: sram: Document qcom,rpm-msg-ram
Link: https://lore.kernel.org/r/20211026140706.1205989-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung SoC drivers changes for v5.16
1. Convert Exynos ChipID and ASV driver to a module and make it a
default, instead of selected. The driver is not essential, so it
could be disabled, if needed.
2. Add support for Exynos850 and Exynos Auto v9 to Exynos ChipID and ASV
driver.
3. Get rid of HAVE_S3C_RTC because it was adding just another layer
instead of direct dependencies.
4. Minor cleanups.
* tag 'samsung-drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: exynos-chipid: add exynosautov9 SoC support
rtc: s3c: remove HAVE_S3C_RTC in favor of direct dependencies
soc: samsung: exynos-chipid: Add Exynos850 support
dt-bindings: samsung: exynos-chipid: Document Exynos850 compatible
soc: samsung: exynos-chipid: Pass revision reg offsets
soc: samsung: pm_domains: drop unused is_off field
arm64: exynos: don't have ARCH_EXYNOS select EXYNOS_CHIPID
soc: samsung: exynos-chipid: do not enforce built-in
soc: samsung: exynos-chipid: convert to a module
soc: samsung: exynos-chipid: avoid soc_device_to_device()
soc: samsung: exynos-pmu: Fix compilation when nothing selects CONFIG_MFD_CORE
Link: https://lore.kernel.org/r/20211026094709.75692-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung mach/soc changes for v5.16
A minor fix for theoretical issue when handling IRQ setup code errors in
S3C24xx and a cleanup for S3C64xx.
* tag 'samsung-soc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: s3c: Use strscpy to replace strlcpy
ARM: s3c: irq-s3c24xx: Fix return value check for s3c24xx_init_intc()
Link: https://lore.kernel.org/r/20211026094709.75692-5-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm ARM64 DTS one more fix for 5.15
This reverts a clock change in the Qualcomm RB5 devicetree which in some
combinations of firmware and configuration causes the device to crash
during boot.
Data on an adjacent platform indicates that this is probably not be the
root cause of the problem, but this resolves the regression seen on RB5
and will allow the SM8250 platform to boot v5.15.
* tag 'qcom-arm64-fixes-for-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
Revert "arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target"
Link: https://lore.kernel.org/r/20211025201213.1145348-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
