Pull timer and timekeeping core updates from Thomas Gleixner:
- Fix a subtly inconsistency in the timekeeping code, which fails to
account for the monotonicity adjustment in ntp_error.
For small changes of the clocksource multiplicator (+/-1) which are
typically used by the NTP PLL this is hard to observe. But for larger
adjustments, e.g. caused by a direct frequency setting through
adjtimex() the one-time uncompensated offset is significant.
Cure this by adjusting ntp_error with the resulting offset so that
the discrepancy is smoothed away over time
- Make tick length calculations correct in NTP.
The timekeeping core takes the quantisation of the clocksource into
account when calculating the tick length to compensate for the
deviation of the nominal NTP_INTERVAL_LENGTH.
While timekeeping gets this right, NTP is not aware of that, which
means it operates on the nominal value and not on the actual value
which is determined by the clock source frequency. The rounding of a
coarse clocksource like the ACPI PM timer results in a +127 PPM
deviation.
Cure this by exposing the deviation to the NTP code so that it can
operate on the same data as the timekeeping core. This is purely
kernel internal. User space still sees the nominal tick lenght via
adjtimex().
- The accuracy of the NTP adjustments is fairly approximate as the code
assumes that the invocations are precisely in NTP interval frequency
ticks and the final adjustment can over and under-run.
Cure this by adjusting ntp_error by the intended skew on each tick to
achieve the desired rate.
- Handle the two competing skews of time offset and time adjustment
correctly by calculating the conflict portion between the skews and
adjusting both accordingly.
- A set of updates and improvements for the selftests
- The usual small fixes and improvements all over the place
* tag 'timers-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
selftests: timers: nsleep-lat: Check all calls to clock_nanosleep() and clock_gettime()
selftests: timers: nsleep-lat: Reuse kselftest error numbers
selftests: timers: nsleep-lat: Explicitly list the tested clocks
selftests: timers: nsleep-lat: Use NSEC_PER_MSEC define for unreasonable latency
selftests: timers: nanosleep: Report each test separately
selftests: timers: nanosleep: Explicitly handle timer_delete() failure
selftests: timers: nanosleep: Move all single clock tests out of the loop in main()
selftests: timers: nanosleep: Reuse kselftest error numbers
selftests: timers: nanosleep: Explicitly list the tested clocks
selftests: timers: nanosleep: Drop output alignment
selftests: timers: Use clock_name() and constants from clock-helpers.h
selftests: Add clock-helpers.h
timer_list: Use ktime_t over nanoseconds
timer_list: Use standard 'long long' format placeholders
hrtimer: Add a lockdep assertion to hrtimer_update_base()
timekeeping: Use u32 for clock_was_set_seq
timekeeping: Rename clockid_aux_valid() to clockid_is_aux_clock()
hrtimer: Account nr_retries on recovered interrupt retries
timers/itimer: Zero-init old itimerval before copy to userspace
nohz: Replace dead select with choice default
...
Pull futex updates from Thomas Gleixner:
- Improvements to various futex self tests:
- Conversion to the selftest harness
- Provide and use thread creation and synchronization helpers to
reduce the dependency on delays, which tend to fail on loaded test
systems
- New tests for validating owner exit scenarios for robust and PI
futexes
- Runtime detect supported features and skip the tests if the kernel
has no support
- A few minor fixes
* tag 'locking-futex-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/futex: Give circular-list nodes static storage
selftests/futex: Use thread synchronization helpers instead of usleep()
selftests/futex: Provide thread creation and synchronization helpers
selftests/futex: Dynamically skip unsupported tests
selftests/futex: Add FUTEX_LOCK_PI owner-exiting coverage
selftests/futex: Migrate robust_list to harness
selftests/futex: Migrate futex_priv_hash to harness
selftests/futex: Migrate futex_numa_mpol to harness
selftests/futex: Migrate futex_requeue_pi_signal_restart to harness
selftests/futex: Migrate futex_requeue_pi_mismatched_ops to harness
selftests/futex: Migrate futex_requeue_pi to harness
selftests/futex: Migrate futex_requeue to harness
selftests/futex: Migrate futex_wait_uninitialized_heap to harness
selftests/futex: Migrate futex_wait_private_mapped_file to harness
selftests/futex: Migrate futex_wait to harness
selftests/futex: Correct validation logic in waitv
selftests/futex: Migrate functional tests to harness
selftests/futex: Remove static keyword from 'head'
futex: Remove unnecessary NULL check before kvfree()
selftests/rseq: Replace glibc-specific __GNUC_PREREQ with portable check
Pull rseq updates from Thomas Gleixner:
"Two trivial updates for RSEQ:
- Add the recently added new test binaries to .gitignore
- Fix a trivial typo in a comment"
* tag 'core-rseq-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/rseq: Add missing test binaries to .gitignore
selftests/rseq: Fix spelling of accommodate
Pull generic entry code updates from Thomas Gleixner:
- Make syscall user dispatching configurable
Not all architectures can makes use of syscall user dispatching.
Allow them to disable the feature completely.
- Consolidate stack randomization for the generic entry code and the
architectures using it.
Stack randomization on syscall entry was sprinkled throughout the
architecture specific low level entry code and in some cases at the
wrong points, e.g. before establishing state, which violates the
non-instrumentable constraints of that code.
Clean this up by integrating stack randomization into the generic
entry code helpers so that it is invoked at the earliest possible
point right after establishing state and converting all generic entry
code using architecture over.
- Clean up the syscall number handling in the generic entry code. It
works correctly for architectures which have a separate return value
storage in pt_regs, but fails to distinguish the case where user
space handed in -1 as syscall number from the case where the entry
code rejects it by returning -1 to the callers. Aside of that the
return value functionality of those interfaces is not really
intuitive.
Fix this by separating the decision to reject a syscall (user
dispatch, ptrace, seccomp ...) from the potential modification of the
syscall number through these mechanisms.
This solves most of the problems for architectures which do not have
a separate return value storage in pt_regs except for the case where
a tracepoint has a BPF script or a probe attached which overwrite
both the syscall number and the return value. But that's a problem
which cannot be solved in the generic code, that only can be
addressed by separating the storage model in the affected
architectures.
* tag 'core-entry-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
entry, treewide: Make syscall_enter_from_user_mode[_work]() indicate syscall execution
entry: Make return type of syscall_trace_enter() bool
entry: Rework trace_syscall_enter()
entry: Rework syscall_audit_enter()
syscall_user_dispatch: Introduce ARCH_SUPPORTS_SYSCALL_USER_DISPATCH
entry: Fix seccomp bypass after ptrace with TSYNC
x86/entry: Simplify the syscall number logic
x86/entry: Get rid of the sys_ni_syscall() indirection
x86/entry: Make syscall functions static
ptrace, treewide: Rename ptrace_report_syscall_entry() to ptrace_report_syscall_permit_entry()
seccomp, treewide: Rename and convert __secure_computing() to return boolean
entry: Use syscall number instead of rereading it
entry: Remove syscall_enter_from_user_mode()
x86/syscall: Use [syscall_]enter_from_user_mode_randomize_stack()
s390/syscall: Use enter_from_user_mode_randomize_stack()
riscv/syscall: Use syscall_enter_from_user_mode_randomize_stack()
powerpc/syscall: Use syscall_enter_from_user_mode_randomize_stack()
loongarch/syscall: Use syscall_enter_from_user_mode_randomize_stack()
entry: Provide [syscall_]enter_from_user_mode_randomize_stack()
randomize_kstack: Provide add_random_kstack_offset_irqsoff()
...
Pull locking updates from Ingo Molnar:
"Futexes:
- Use runtime constants for futex_hash computation (K Prateek Nayak,
Peter Zijlstra)
- Optimise the size check get_futex_key() (Sebastian Andrzej Siewior)
- Avoid private hash use-after-free on final put (Felix Hoffmann)
- Tell kmemleak we're not leaking __futex_queues (Peter Zijlstra)
Rust integration updates:
- Implement refcounted interrupt disable and SpinLockIrq for Rust
(Boqun Feng, Heiko Carstens, Joel Fernandes, Lyude Paul)
- Rust sync: add helpers for mb, dma_mb and friends; add generic
memory barriers and use LKMM atomics instead of Rust atomics in the
revocable code (Gary Guo)
- Add abstraction and integrate synchronize_rcu() (Philipp Stanner)
Lock debugging:
- Add qspinlock contended_release tracepoint (Dmitry Ilvokhin, Peter
Zijlstra)
- Enable the printing of held locks of remote running tasks and print
task CPU (Ingo Molnar)
- percpu-rwsem: Annotate intentional data race in readers_active_check()
(Sun Shaojie)
Misc fixes and updates by Boqun Feng, Peter Zijlstra, Fangrui Song,
Naveen Kumar Chaudhary and Thomas Huth"
* tag 'locking-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
rust: sync: Introduce SpinLockIrq::lock_with() and friends
rust: sync: Add SpinLockIrq
rust: sync: Use super::* in spinlock.rs
rust: helper: Add spin_{un,}lock_irq_{enable,disable}() helpers
rust: Introduce interrupt module
s390/preempt: Enable HAS_SEPARATE_PREEMPT_RESCHED_BITS
arm64: sched/preempt: Enable HAS_SEPARATE_PREEMPT_RESCHED_BITS
preempt: Introduce HAS_SEPARATE_PREEMPT_RESCHED_BITS
sched: Avoid signed comparison of preempt_count() in __cant_migrate()
sched: Remove the unused preempt_offset parameter of __cant_sleep()
locking: Switch to _irq_{disable,enable}() variants in cleanup guards
irq: Add KUnit test for refcounted interrupt enable/disable
irq,spin_lock: Add counted interrupt disabling/enabling
openrisc: Include <linux/cpumask.h> in smp.h
preempt: Introduce __preempt_count_{sub,add}_return()
preempt: Introduce HARDIRQ_DISABLE_BITS
preempt: Track NMI nesting to separate per-CPU counter
futex: Tell kmemleak we're not leaking __futex_queues
x86/paravirt: Trace contended_release on unlock
tracing/lock: Use TRACE_EVENT_FN() for contended_release
...
Pull performance events updates from Ingo Molnar:
"uprobes updates:
- Fix a category of bugs with optimized uprobes that can clobber the
redzone area with call instruction storing return address on stack
where user code may keep temporary data without adjusting RSP.
Fix this by moving the optimized uprobes on top of 10-bytes NOP
instruction, so we can squeeze another instruction to escape the
redzone area before doing the call (Jiri Olsa, Andrii Nakryiko)
- Switch uretprobes_srcu to SRCU-fast-updown, to improve performance
(Puranjay Mohan)
Intel CPU PMU driver updates:
- Optimize ACR handling in match_prev_assignment() (Dapeng Mi)
- Fix various PMU driver bugs and data leaks (Dapeng Mi)
- Fix Intel PT stop/start with no update (Adrian Hunter)
Intel uncore PMU driver updates:
- Fix various uncore PMU setup robustness bugs (Zide Chen)
AMD uncore PMU driver updates:
- Add group validation (Sandipan Das)
.. and misc fixes and updates by Dapeng Mi, Randy Dunlap and Zide Chen"
* tag 'perf-core-2026-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
perf/x86: Optimize ACR handling in match_prev_assignment()
perf/x86/intel: Fix intel_cap handling on hybrid PMUs
perf/x86: Remove stale fixed counter helper and fix hybrid PMU access
perf/x86/intel: Unwind cpuc state if PEBS buffer setup fails
perf/x86: Guard intel_pmu_cpu_dead() against invalid hybrid PMU casts
perf/x86: Free hybrid state on PMU init failure
perf/x86: Unregister PMI handler on PMU init failure
perf/x86/intel/pt: Fix stop/start with no update
perf/x86/intel/pt: Use bitwise access for PERF_HES_STOPPED
perf/x86/intel/pt: Factor out pt_config_enable()
uprobes: Switch uretprobes_srcu to SRCU-fast-updown
srcu: Add lock guard for srcu_fast_updown flavor
perf/x86/intel/pt: Drop kernel-doc for deleted struct members
perf/x86/amd/uncore: Add group validation
selftests/bpf: Add tests for forked/cloned optimized uprobes
selftests/bpf: Add tests for uprobe nop10 red zone clobbering
selftests/bpf: Add reattach tests for uprobe syscall
selftests/bpf: Change uprobe/usdt trigger bench code to use nop10
selftests/bpf: Change uprobe syscall tests to use nop10
selftests/bpf: Emit nop,nop10 instructions combo for x86_64 arch
...
Pull arm64 updates from Will Deacon:
"There's a reasonable amount of stuff here, including a bunch of
updates to the perf PMU drivers and some MPAM updates to expose the
memory bandwidth counters via resctrl.
On the architecture side, some highlights include support for BBML3
and steps towards support for an architectural NMI solution, all
wrapped up in a web of fixes for latent issues identified by Sashiko.
ACPI:
- Combine reads of AMU counters into a single FFH feedback counter op
Confidential computing:
- Fix smp_processor_id() in preemptible context when retrieving an
attestation token inside a realm
- Convert pKVM over to a "CC platform"
- Clean-up our SWIOTLB configuration in preparation for reworking the
handling of encrypted/decryped DMA buffers in the dma-mapping tree
CPU errata handling:
- Work around broken device memory ordering on NVIDIA Olympus cores
- Fix broken 'nospectre_bhb' command-line option
- Select the idle loop backend instruction on the command-line
CPU features:
- Replace our BBML2-noabort feature with the new architectural BBML3
feature
- Disable in-kernel BTI for recent versions of Clang due to issues
with livepatch that are still being investigated
- Clean-up documentation describing which ID register fields are
exposed to userspace
Interrupts:
- Preliminary work towards supporting FEAT_NMI, which cleans up our
IRQ entry code and fixes some latent issues with pseudo-NMI
- Support for an SDEI backend to trigger an NMI backtrace
Memory management:
- Treat all devices as coherent when CLIDR_EL1.LoC == 0
- Fix no-map handling of sub-page-sized regions
- Second attempt at unmapping the linear aliases of the kernel data
and bss sections
- Fix EFI runtime calls when software-PAN is enabled
Miscellaneous:
- Add Mark Rutland as a reviewer!
- Tidy-up our futex cmpxchg logic when using the new LSUI
instructions
- Drop the requirement on DYNAMIC_FTRACE_WITH_CALL_OPS when
selecting HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
- Fix a false-positive KCSCAN splat in the delay loop
- Use a portable typedef for 128-bit scalar types in our UAPI headers
- Non-critical fixes for Sashiko reports all over
MPAM:
- Hook MPAM memory bandwidth counters into resctrl's counter
assignment interface
- Fix a quirk in the MPAM bandwidth counting on Nvidia T241 so that
it also applies to 63 bit counters
Perf:
- Workarounds for hardware issues in the CMN-S3 PMU (Graviton 5) and
CPU PMU (NVIDIA Olympus again!)
- Add support for the DDR PMU on Marvell CN20K SoCs
- Add support for Picoheart implementations of the DCW PCIe PMU
- Add support for Channel/Rank/Bank filtering in the CXL PMU driver
- Add support for 64-bit counters in the CSPMU device
- Add support for revision 2 of the CMN S3 PMU
Ptrace:
- Fix a decade-old bug in our handling of seccomp and tracing on
syscall entry
- Fix regset handling for inactive SVE and SSVE registers
Selftests
- Add some tests for the decade-old bug that we just tried to fix in
our syscall entry path
- Fix SVE test crash on SME-only CPUs"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (95 commits)
arm64/efi: Avoid voluntary preemption with efi_mm installed
arm64: bti: Disable in-kernel BTI with recent versions of Clang
arm64: entry: Avoid unnecessary local_irq_disable() on kernel exit
irqchip/gic-v3: make the unmasking of pseudo-NMIs explicit when handling IRQs
arm64: Disable KCSAN instrumentation in delay.o
arm_mpam: Disable driver unbind to avoid UAF
arm_mpam: Fix a NULL pointer dereference on unbinding after an error interrupt
perf: arm_pmuv3: Zero initialize hw_id branch stack field
arm64: mm: Unmap kernel data/bss entirely from the linear map
iommu/arm-smmu-v3-sva: Use system_supports_bbml3() to detect CPU feature
perf/arm-cmn: Support CMN S3 r2
perf/arm-cmn: Plumb in new filter types
perf/arm-cmn: Refactor event filter data
perf/arm-cmn: Refactor event filter programming
perf/arm-cmn: Rename filter variables for clarity
arm64: mm: fix accidental linear mapping of no-map reserved memory
tools: Ensure tools copy of linux/filter.h exports the UAPI
kselftest/arm64: Fix abi test compilation errors
arch: arm64: add early_param idle=<wfi|yield|nop>
arm64: entry: mask DAIF before returning from C EL1 handlers
...
Pull nolibc updates from Thomas Weißschuh:
- New architecture: Alpha
- New library functionality: readlink(), getcwd()
- Various bugfixes and cleanups
* tag 'nolibc-20260814-for-7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc:
tools/nolibc: add support for Alpha
tools/nolibc/powerpc: mark ctr and xer as clobbered by system call
tools/nolibc: remove dead __ARCH_WANT_SYS_OLD_SELECT
selftests/nolibc: add debug information
tools/nolibc: mark arg1 operand in __nolibc_syscall0() as write-only
selftests/nolibc: Add test for getcwd() and readlink()
tools/nolibc: unistd: Add readlink()
tools/nolibc: unistd: Add getcwd()
Pull liveupdate updates from Mike Rapoport:
"Kexec Handover:
- Fix size calculation in kho_preserved_memory_reserve() for
preservations larger than 2 GiB
Live Update Orchestrator:
- move liveupdate selftest utilities into a library so that selftests
of subsystems participating in liveupdate, e.g. PCI and VFIO, can
use them and drop direct ioctl calls from the tests
- add end to end liveupdate test infrastructure that allows running
the tests across a kexec in QEMU
- remove redundant INIT_LIST_HEAD in luo_session_alloc()
- remember the error status of an FLB retrieve() and return it on
subsequent attempts rather than retrying retrieve() with an FLB in
an unexpected state
- reference count the outgoing FLB so that it cannot be freed while a
caller is using it, the same way it's done for the incoming FLB
- reject nonzero reserved field in LIVEUPDATE_SESSION_FINISH so that
it can be reused by a future extension"
* tag 'liveupdate-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux:
kho: fix size calculation in kho_preserved_memory_reserve()
selftests/liveupdate: Move luo_test_utils.* into a reusable library
selftests/liveupdate: Use luo_test_utils.c for liveupdate ioctl APIs
liveupdate: Remember FLB retrieve() status
liveupdate: Reference count outgoing FLB data
liveupdate: reject nonzero reserved value for SESSION_FINISH
liveupdate: Remove redundant INIT_LIST_HEAD in luo_session_alloc
selftests/liveupdate: add end to end test infrastructure and scripts
Pull power management updates from Rafael Wysocki:
"As has been the case for quite some time, this set of changes is
dominated by cpufreq updates including intel-pstate and amd-pstate
driver updates, minor fixes and cleanups of other assorted cpufreq
drivers, schedutil governor updates, fixes of the Rust bindings, new
hardware support (IPQ5210 in qcom-nvmem), and some updates of self
tests related to cpufreq.
The second largest group of changes are cpuidle updates consisting of
intel_idle driver updates and ACPI processor idle driver updates, both
mostly related to ACPI _LPI support.
There are also updates related to system sleep, mostly in the
hibernation core code, two operating performance points (OPP) updates,
one runtime PM framework update, one power capping update, and some
tools updates including the addition of ACPI CPPC support to cpupower.
Specifics:
- Minor fixes and cleanups in assorted cpufreq drivers (Dan
Carpenter, Guru Das Srinagesh, Haoxiang Li, Karl Mehltretter, Sasha
Finkelstein, and Pan Chuang)
- Fix cpufreq table creation and bios_limits() callback in the Rust
bindings (Priya Bala Govindasamy)
- Add IPQ5210 support to qcom-nvmem driver (Varadarajan Narayanan)
- Adjust the .adjust_perf() cpufreq driver callback to allow the
maximum performance value to be passed to drivers and update the
intel_pstate driver to use it (Rafael Wysocki)
- Set policy->cur to the actual requested frequency in the
intel_pstate driver when the performance policy is used (Rafael
Wysocki)
- Simplify HWP handling on Broadwell processors in intel_pstate
(Rafael Wysocki)
- Fix setting minimum P-state at init time in intel_pstate (Rafael
Wysocki)
- Consolidate frequency values computation in intel_pstate and clean
up code in that driver (Rafael Wysocki)
- Add missing kernel-doc descriptions for structure and union members
in the amd-pstate driver (David Vernet)
- Handle missing policy in dynamic EPP callbacks in the amd-pstate
driver (EDAMAMEX)
- Introduce EXPORT_SYMBOL_FOR_PSTATE_UT() to export amd-pstate driver
symbols to the amd-pstate-ut subdriver (K Prateek Nayak)
- Add dynamic EPP as an "energy_performance_preference" mode in
amd-pstate, remove the "amd_dynamic_epp" kernel command line option
and the "dynamic_epp" sysfs attribute, and update the dynamic_epp
documentation accordingly (K Prateek Nayak)
- Add unit tests for CPPC Performance Priority and the "dynamic" EPP
mode in the amd-pstate driver (K Prateek Nayak)
- Set min_limit_freq based on bios_min_perf in amd-pstate and remove
the defensive check for bios_min_perf from it (K Prateek Nayak)
- Fix EPP return type and handle errors in amd-pstate during
initialization, toggle auto_sel in active mode on shared memory
systems, and cache the firmware programmed EPP value (Marco
Scardovi)
- Skip tests in amd-pstate-ut if the amd-pstate driver is not in
active use (Qianheng Peng)
- Replace sprintf() with sysfs_emit() in sysfs show in the cpufreq
schedutil governor and fix a self-contradictory comment in
sugov_iowait_apply() (Zhongqiu Han)
- Fix the usage example for the sampling_rate tunable of the ondemand
cpufreq governor in admin-guide (wangxiaodong)
- Avoid using deep idle states during initialization in the
intel_idle driver to work around device handling issues (Rafael
Wysocki)
- Fix and refactor the ACPI processor driver code related to ACPI
_LPI support and add ACPI _LPI support to intel_idle based on that
ACPI processor driver update (Rafael Wysocki)
- Backup and restore governor for cpufreq sptests (Yiwei Lin)
- Remove unnecessary sudo from quick_shuffle() and remove unused
local variables from switch_show_governor() in cpufreq selftests
(Jinseok Kim)
- Rename the PM core module parameter prefix to "pm" and allow the PM
transition (DPM) watchdog to be disabled by default (Tzung-Bi Shih)
- Fix off-by-one in wakelocks number limit check in the system sleep
sysfs interface (Haowen Tu)
- Remove kernel-doc markings from helper descriptions in the core
hibernation code (Adi Nata)
- Use %pe to print error pointer values in the hibernation core
(Ronan Marchal)
- Fix memory leak in snapshot_write_next() error path (Malaya Kumar
Rout)
- Delay allocating and linking the next swap_map_page in the
hibernation image saving code until another image page actually
needs to be recorded (Haesung Kim)
- Fix cleanup ordering around scope-based pointers in OPP (Gregor
Herburger).
- Use clk_get_optional() for optional clocks in OPP (Praveen Talari).
- Stop setting runtime_error on runtime resume callback failures to
allow drivers to recover from resume issues (Praveen Talari)
- Handle PMU registration failure during probe in the intel_rapl_tpmi
driver (Sumeet Pawnikar)
- Avoid optional imports in intel_pstate_tracer unless they are
really needed (Yousef Alhouseen)
- Add generic CPPC performance display to the cpupower utility, build
and call CPPC information on non-AMD processors, make cpupower
print kernel and hardware frequency information, and add libm to
cpupower for generic CPPC view (Jeremy Linton)
- Remove conditional return with no effect from cpupower (Sang-Heon
Jeon)"
* tag 'pm-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits)
cpufreq: imx6q: fix out-of-bounds write when probed more than once
cpufreq: imx6q: fix devres accumulation across driver rebind
rust: cpufreq: Fix temporary write in Registration::bios_limit_callback
rust: cpufreq: Add CPUFREQ_TABLE_END as last table entry in TableBuilder::to_table
opp: Use clk_get_optional() to avoid leaving opp_table->clk as an error pointer
intel_idle: Avoid using deep idle states during initialization
cpupower: remove conditional return with no effect
cpufreq: intel_pstate: Adjust policy->cur in active mode to policy
cpufreq/amd-pstate: Document missing kernel-doc members
cpufreq/amd-pstate-ut: Add unit test for CPPC Performance Priority
cpufreq/amd-pstate-ut: Add unit test for "dynamic" EPP mode
cpufreq/amd-pstate: Reduce the scope of exported symbols
Documentation/amd-pstate: Update dynamic_epp documentation with new behavior
cpufreq/amd-pstate: Remove "amd_dynamic_epp" cmdline and "dynamic_epp" sysfs
cpufreq/amd-pstate: Add dynamic EPP as an "energy_performance_preference" mode
cpufreq/amd-pstate: Extract platform profile to EPP conversion into a helper
cpufreq/amd-pstate: Remove the defensive check for bios_min_perf
cpufreq/amd-pstate: Set min_limit_freq based on bios_min_perf
powercap: intel_rapl_tpmi: Handle PMU registration failure during probe
PM: sleep: Allow disabling DPM watchdog by default
...
Pull kselftest update from Shuah Khan:
"Fix zram test failure in kernel_gte() when using dash and a spelling
error in ftrace poll test comment"
* tag 'linux_kselftest-next-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/zram: fix kernel_gte() for POSIX sh
selftests/ftrace: fix spelling error in poll test comment
Pull kunit updates from Shuah Khan:
"Fixes and new kunit and tools, enable new configs:
- configs: enable GPIO kunit test cases in all_tests.config
- string-stream: Replace strlcat() with strscpy() and seq_buf
- configs: enable GPIO kunit test cases in all_tests.config
Documentation:
- Test config entries shouldn't select other configs
- Fix outdated FAQ entries
Add the ability to skip entire test suites and an example test suite
that can be skipped at runtime:
- Add ability to skip entire test suites
- Add example of test suite that can be skipped at runtime"
* tag 'linux_kselftest-kunit-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: fix _list_tests filtering wrong variable when list has TAP prefix
kunit: configs: enable GPIO kunit test cases in all_tests.config
kunit: string-stream: Replace strlcat() with strscpy() and seq_buf
Documentation: kunit: Fix outdated FAQ entries
Documentation: kunit: Test Kconfig entries shouldn't select other configs
kunit: Add example of test suite that can be skipped at runtime
kunit,rust: Add ability to skip entire test suites
Pull vfs superblock updates from Christian Brauner:
- Make it possible to share a block device between multiple
filesystems.
erofs can mount read-only blob devices shared between many
superblocks, but because we only tracked a single superblock a
freeze, thaw, removal or sync on such a device was never propagated
to all the superblocks using it, and there was no way to find them.
Add an efficient table to lookup all superblocks using a given block
device.
- A bunch of pre-existing fixes fell out of this work:
A block-device freeze racing a btrfs device change could leave the
whole filesystem stuck frozen. A bdev_freeze() issued by "dmsetup
suspend" or an LVM snapshot resolves that holder to freeze the
filesystem. and bdev_thaw() resolves it again to thaw. A freeze
landing while btrfs is adding, removing or replacing a device freezes
the filesystem. The membership change then drops that link. So the
matching thaw could no longer find the superblock.
Forbid freezing a device for the duration of a membership change,
modelled on deny_write_access()/allow_write_access().
* tag 'vfs-7.3-rc1.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (24 commits)
super: fix dying superblock warning messages
block: reject block device inodes with i_rdev == 0 in lookup_bdev()
selftests/filesystems: add ustat() coverage
fs: look up the superblock via the device table in user_get_super()
super: make fs_holder_ops private
f2fs: open via dedicated fs bdev helpers
erofs: open via dedicated fs bdev helpers
fs: tolerate per-superblock freeze errors on shared devices
fs: look up superblocks via the device table in fs_holder_ops
ext4: open via dedicated fs bdev helpers
btrfs: open via dedicated fs bdev helpers
xfs: port to fs_bdev_file_open_by_path()
fs: add dedicated block device open helpers for filesystems
fs: maintain a global device-to-superblock table
ocfs2: don't reset s_dev on dismount
ext4: use anonymous devices for KUnit test superblocks
fs, block: move blk_mode_t and fop_flags_t into <linux/types.h>
super: take lock after last reference count
super: convert s_count to refcount_t s_passive
btrfs: deny freezing devices undergoing a replace
...
Pull overlayfs updates from Christian Brauner:
"This lets the merged overlayfs mount itself be idmapped through
mount_setattr(MOUNT_ATTR_IDMAP), in addition to the already supported
idmapped lower and upper layers. The same overlay tree can then be
exposed under a different ownership view.
Overlayfs already normalizes every underlying id through the relevant
layer idmap when ovl_copyattr() copies attributes into the overlay
inode. So the overlay inode's i_uid and i_gid are overlay-final ids.
The overlay mount idmap composes on top of that and is applied at the
overlay-inode boundary only while the underlying layers keep being
accessed with the mounter's credentials through their own (possibly
idmapped) mounts.
So this only changes how the caller sees the overlay inode and never
widens the mounter's access to the layers. The second,
mounter-credential check in ovl_permission() against the real inode
stays on the layer idmap.
Most paths need no change because the VFS applies the mount idmap to
the overlay inode before overlayfs runs or after it returns at the
syscall boundary. Overlayfs only has to change where it bypasses the
generic path.
This also included is a fix for a double end_creating() on the
overlayfs casefold-mismatch path"
* tag 'vfs-7.3-rc1.ovl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ovl: fix double end_creating() on the casefold-mismatch path
ovl: document security.capability idmapping on the xattr forward paths
selftests/filesystems/overlayfs: test idmapped overlay mounts
selftests/filesystems/overlayfs: fix set_layers_via_fds link error
docs: document idmapped overlay mounts
ovl: allow idmapping overlay mounts
ovl: handle idmapped mounts in ovl_set_acl()
ovl: handle idmapped mounts in ovl_getattr()
ovl: handle idmapped mounts in ovl_setattr()
ovl: handle idmapped mounts in ovl_permission()
ovl: handle idmapped mounts in ovl_create_object() and ovl_tmpfile()
Pull misc vfs updates from Christian Brauner:
"Bigger cleanups:
- The lockref dead-count handling is tidied up.
The open-coded check for a count below zero as the dead marker
relies on information the caller should not have.
- make put_mnt_ns() leave mounts connected. Destroying a mount
namespace disconnected its mounts from their mount points. So a
file descriptor still open on the parent of a mount point could be
used to peek under it.
Locked mounts were already kept connected to prevent exactly that.
But a mount is only locked when its tree is copied across a user
namespace boundary. So a mount namespace set up by a privileged
component had no locked mounts and its mounts were disconnected.
Passing UMOUNT_CONNECTED keeps every mount connected and prevents
that bug.
- vfs_prepare_mode() passes S_IFDIR for directories. I meant to fix
that ago but didn't get to it. So now someone finally did it.
This kills the exception where the mode could be 0 when a directory
was created whereas every other creation operation passed it
explicitly already.
- move long delayed work for ufs, jffs2, hfsplus, hfs and affs from
the per-cpu system_long_wq to the new unbound system_dfl_long_wq.
None of that work relies on per-cpu state and the work item is
enqueued with queue_delayed_work() whose timer is global anyway. So
it may as well benefit from scheduler task placement.
Smaller fixes and cleanups:
- unlock_buffer() and journal_end_buffer_io_sync() use
clear_and_wake_up_bit()
- the pipe page pools are unified into a single per-pipe pool and the
extra wake_up(rd_wait) is limited to EPOLLET consumers
- eventpoll now computes its timer slack lazily in ep_poll()
- shrink_dcache_for_umount() keeps making progress on busy roots
- excess xarray nodes are freed in clear_inode()
- romfs detects hard link cycles
- the user path of nested backing files is fixed
- pidfd holds exec_update_lock around the namespace ioctl
- non-memcg-aware nr_cached_objects is skipped during memcg slab
shrink
- iomap_write_iter() always returns status
- mangle_path() is renamed to seq_mangle_path()
- inode timestamp accessors are annotated
- new regression test for pipe->poll_usage.
- a few documentation, kernel-doc and selftest fixes"
* tag 'vfs-7.3-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (67 commits)
selftests/namespaces: Fix racy pipe handshake in timens and pidns_separate
selftests/epoll: add a regression test for pipe->poll_usage
pipe: only enable the extra wake_up(rd_wait) for EPOLLET consumers
pidfd: hold exec_update_lock around namespace ioctl
fs: fix user path of nested backing files
fs: remove stale inode_insert5() kernel-doc parameter
fs: fix switch/case indentation in sysfs() syscall
fs: document semantics of kstat::{uid,gid} fields
dcache: keep shrink_dcache_for_umount() making progress on busy roots
seq_file: rename mangle_path to seq_mangle_path
nstree: add/fix struct ns_id_req kernel-doc member fields
dcache: use lockref routines for dead count checks
lockref: tidy up dead count handling
initramfs: fix typo in reserve_initrd_mem comment
fs/pipe: unify the page pools into a single per-pipe pool
fs: annotate inode timestamp accessors
eventpoll: compute timer slack lazily in ep_poll()
selftests/filesystems: add mntns cleanup test
put_mnt_ns(): leave mounts connected
affs: Move long delayed work on system_dfl_long_wq
...
Pull vfs bpf access updates from Christian Brauner:
"This adds a bpf_sock_read_xattr() kfunc so a BPF LSM program can read
a user.* extended attribute from a socket's sockfs inode locklessly.
userspace already uses user.* xattrs on sockets to implement socket
rate limiting and to tag sockets for other purposes such as a varlink
registry. There has been no efficient way for a BPF program to read
those labels back. With this a listening socket marked from userspace
with fsetxattr() can be read back during bind or connect and acted
upon on the connecting socket. That lets userspace mark sockets and
later rediscover them or implement policy on them"
* tag 'vfs-7.3-rc1.kfunc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/bpf: Add test for bpf_sock_read_xattr() kfunc
fs: Add bpf_sock_read_xattr() kfunc to read socket xattrs
Pull failfs filesystem from Christian Brauner:
"Add failfs and expose a FD_FAILFS_ROOT sentinel.
This allows userspace to shed their filesystem state completely. A
process with its root or working directory in failfs must anchor every
path lookup at an explicit file descriptor. Absolute paths, absolute
symlinks and AT_FDCWD-relative lookups simply fail.
Failfs is the counterpart to nullfs. nullfs says adds a permanently
empty, immutable directory whose lookups fail with ENOENT but which
can be opened, read, stat'd and mounted upon. Failfs on the other hand
fails every operation. The root cannot be opened at all. A single
instance is mounted during early boot via kern_mount(), which makes it
logically distinct from every mount namespace.
This is accompanied by a new fchroot() system call which makes
chrooting via a file descriptor a first class concept. It's possible
to chroot into failfs as an unprivileged user provided the task has no
new privileges set"
* tag 'vfs-7.3-rc1.failfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
Documentation: add failfs documentation
selftests/filesystems: add failfs selftests
arch: hookup fchroot() system call
fs: support FD_FAILFS_ROOT in fchroot()
fs: add fchroot()
fs: support FD_FAILFS_ROOT in fchdir()
fs: add failfs
Pull binfmt updates from Christian Brauner:
"This contains a bunch of work for binfmt_misc. It fixes a bunch of
old bugs, reworks the locking, and then extends the format registry
so a binary type can be matched programmatically and its interpreter
computed per exec instead of being a fixed string recorded at
registration time.
This allows nixos and other to e.g., implement relocatable binaries
meaning the interpreter/dynamic loader can be determined
programatically, say found relative to the binary. The mechanism is
flexible and can support other policies:
- Handler lookup is now an rcu walk. An exec that matches no
binfmt_misc entry should now never write to a shared cacheline
- remove the VERBOSE_STATUS and USE_DEBUG compile time toggles
- convert the entry file to a seq_file which simplifies things quite
a bit and kills a lot of custom logic
- make flags proper enums
- rename struct Node to binfmt_misc_entry
- allow entries to be removed with unlink(2)
- Add the ability to attach bpf programs to binfmt_misc entries so
it's possible to dynamically choose the execution environment such
as the loader or interpreter on a per binary basis.
A handler is an instance of a binfmt_misc_ops struct_ops with a
->match() and a ->load() program. match() decides from the entry
lookup walk whether the handler applies under the same
registration-order. It can read file content as needed not only the
prefetched 256 bytes in bprm->buf.
load() then selects the interpreter and stages it through the new
bpf_binprm_set_interp(), bpf_binprm_set_interp_arg() and
bpf_binprm_set_flags() kfuncs.
Handlers are published in a registry keyed by the registering
task's user namespace and activated through the existing text
interface with a new 'B' type carrying the handler name:
echo ':origin:B::::nix:' > /proc/sys/fs/binfmt_misc/register
The permission and namespacing model is unchanged. Activating a
handler requires the same write access to an instance as any other
registration. A container mounting its own instance escapes the
host's entries exactly as before. The computed interpreter is
opened with open_exec() under the caller's credentials and goes
through full LSM vetting as the next binprm level. A program can
only ever redirect the caller to something the caller could exec
anyway.
- Two dispatch modes are added. So far the chosen interpreter owns
the whole process identity (argv[0], /proc/pid/cmdline,
/proc/self/exe all name interpreter information). So relocatable
find the dynamic linker instead. Also a binary passed to execveat()
as an inaccessible O_CLOEXEC fd cannot run at all and gdb trips
because AT_ENTRY and AT_PHDR do not match the exe file. So PIE
symbols are unrelocated.
This adds transparent dispatch which allows the interpreter to load
the binary through AT_EXECFD and leaves the argument vector exactly
as the caller built it and labels mm->exe_file and comm with the
binary. It also raises the AT_FLAGS_TRANSPARENT_INTERP aux vector
bit. The interpreter keeps control of mapping the binary.
The second mode is loader substitution. This allows a binary to be
executed natively and only the interpreter to be changed.
- Last, interpreters can be bound at registration time. Each
interpreter is opened by its own write with the credentials the
entry file was opened with. The program picks one per exec with
bpf_binprm_select_interp().
Ucounts are used to properly account for pre-opened interpreters
via /proc/sys/user/max_binfmt_misc_interpreters"
* tag 'vfs-7.3-rc1.binfmt' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (63 commits)
binfmt_misc: document the pre-opened interpreter limit
selftests/exec: test the pre-opened interpreter limit
binfmt_misc: correctly account pre-opened interpreters
binfmt_misc: document interpreters bound by a 'B' entry
selftests/exec: test interpreters bound to a 'B' entry
binfmt_misc: let a 'B' entry bind its interpreters
binfmt_misc: carry pre-opened interpreters in struct binfmt_misc_interp
selftests/exec: share the bpf handler preconditions
binfmt_misc: document registering an entry disabled
selftests/exec: test registering an entry disabled
selftests/exec: let binfmt_flag_supported() return a bool
selftests/exec: check that a binfmt_misc instance cannot be pinned
binfmt_misc: let a register string create an entry disabled
binfmt_misc: document loader substitution
selftests/exec: test binfmt_misc loader substitution
binfmt_misc: let a bpf handler request loader substitution
binfmt_misc: add the 'L' loader substitution flag
binfmt_elf_fdpic: consume a stashed PT_INTERP substitute
binfmt_elf: consume a stashed PT_INTERP substitute
exec: carry a PT_INTERP substitute in struct linux_binprm
...
Pull vfs fixes from Christian Brauner:
- Don't warn when a mount is completed from another user namespace.
fsopen() records the caller's user namespace in fc->user_ns and
hands back an ordinary file descriptor. The task that calls
fsconfig(FSCONFIG_CMD_CREATE) doesn't have to be the one that
created the context, and mount_capable() lets it through as long
as the caller has CAP_SYS_ADMIN over fc->user_ns, which anyone in
an ancestor namespace does. So fc->user_ns != current_user_ns()
is something an unprivileged user can arrange.
Both overlayfs and binfmt_misc WARN_ON() that. Overlayfs already
has the same check as a plain error return in ovl_parse_param().
Drop the WARN_ON() and just refuse. Add selftests for both cases.
- Reject pid allocations through dead ancestor pid namespaces.
Require PIDNS_ADDING in every namespace that will receive the pid
before publishing any of them. That preserves the invariant that
free_pid() never decrements pid_allocated in a namespace whose
child_reaper is no longer live. The existing ENOMEM behavior is
unchanged.
* tag 'vfs-7.2-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
pid: reject allocations through dead ancestor pid namespaces
selftests/filesystems: test completing a context from another user namespace
binfmt_misc: don't warn when the mount is completed from another user namespace
ovl: don't warn when the mount is completed from another user namespace
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
There is a known WiFi/mt76 regression, waiting for a complete fix that
should land soonish.
Previous releases - regressions:
- tcp: fix icsk_ack.ato bitfield overflow
- af_unix: Unlink scc_entry in unix_del_edge()
- ipv4: fix use-after-free in fib_nhc_update_mtu()
- netfilter:
- ipset: fix refcount race between list:set GC and swap
- nf_tables_offload: suppress WARN_ON_ONCE for ENOMEM in abort
path
- sched: act_ct: fix sk_buff leak when the header checks reject a
packet
- sctp: clear new_transport when removing a peer
- dibs: correct freeing of dmb_clientid_arr
- ovpn: fix NULL dereference when killing missing key
- eth:
- veth: fix queue index used to wake the peer txq in veth_poll
- ngbe: fix NULL pointer dereference in non-MSI-X interrupt
enabling
- gve: fix zero-length skb frag with header-split
Previous releases - always broken:
- core: fix skb length accounting after generic XDP frag adjustment
- af_packet: don't send zero-byte data in tpacket_snd().
- eth:
- bnxt: avoid deadlock when canceling IRQ affinity notifier
- ipvlan: inherit needed_headroom and needed_tailroom from
phy_dev"
* tag 'net-7.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
l2tp: fix tunnel and session refcount leak on seq_file release
net/sched: cls_bpf: reject dev-bound programs bound to a different device
sctp: fix use-after-free of cached ASCONF chunk
net: ethernet: ti: am65-cpsw-nuss: Fix port_id extraction from SRC TAG
sctp: clear new_transport when removing a peer
net/dibs: Correct freeing of dmb_clientid_arr
net/sched: cls_u32: skip hash tables in u32_bind_class()
gve: fix NULL dereference due to missing ptp adjfine
gve: fix zero-length skb frag with header-split
net/sched: act_api: fix TOCTOU NULL deref on a->goto_chain
af_packet: Don't send zero-byte data in tpacket_snd().
tipc: read le->link under the node lock in tipc_node_link_down()
selftests: tls: cover splice after a failed decrypt
net/tls: Fail tls_sw_splice_read() after a failed async decrypt
net: ngbe: fix NULL pointer dereference in non-MSI-X interrupt enabling
net: tap: fix wrong transport_header when sending VLAN-tagged frame
net: packet: fix wrong transport_header when sending VLAN-tagged frame
vxlan: do not arm the ageing timer on a device that is down
ipv4: fix use-after-free in fib_nhc_update_mtu()
NTB: ntb_netdev: Preserve RX queue depth on allocation failure
...
In timens_separate and pidns_separate both the child and the grandchild
write a 'Y' readiness byte to the same pipe, but the parent expects a
single 'Y' followed by the grandchild's pid. If the grandchild's byte
arrives first, the parent takes it for the child's and reads the pid
misaligned, ending up with a garbage value.
The parent stores that pid in self->grandchild_pid so that
FIXTURE_TEARDOWN() can kill the grandchild. A garbage pid leaves the real
grandchild alive in pause(), holding the test runner's TAP pipe open and
hanging the whole collection.
The grandchild has nothing to report, so drop its write() and leave the
child as the sole writer.
Fixes: fdb48976b6 ("selftests/namespaces: Kill grandchild in nsid fixture teardown")
Signed-off-by: Ricardo B. Marlière (SUSE) <ricardo@marliere.net>
Link: https://patch.msgid.link/20260810-selftests-namespaces_race-v1-1-4307e833783e@marliere.net
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
pipe->poll_usage was added to ensure that edge-triggered epoll consumers
get a wakeup on every write, even if the pipe was already non-empty.
However, none of the existing epoll_wakeup_test cases cover this; the
test suite passes even with WRITE_ONCE(pipe->poll_usage, true) removed.
Add a test that writes twice to a pipe and verifies that epoll_wait with
EPOLLET reports data each time. This covers the pipe-specific per-write
wakeup behavior that edge-triggered consumers depend on.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://patch.msgid.link/amnlGZesXu-SUK2H@redhat.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
`_list_tests()` runs the kernel to list tests, strips printk timestamp
lines via `extract_tap_lines()`, then drops the dummy TAP header from
the cleaned `lines`. However the subsequent regex filter mistakenly
operates on the original `output` instead of the cleaned `lines`. When
the kernel output includes timestamp prefixes (common with UML or slower
setups), e.g.:
[ 0.100000] suite.test1
[ 0.100000] suite.test2
the anchored regex `^[^\s.]+\.[^\s.]+$` rejects them and `--list_tests`
returns an empty list.
Filter `lines` instead of `output`, matching the behavior of the
adjacent `_list_tests_attr()` which already returns the cleaned list.
Add a regression test with timestamp-prefixed input to verify the fix.
Link: https://lore.kernel.org/r/20260803190059.36491-1-mohammad.abukhader@hotmail.com
Fixes: 723c8258c8 ("kunit: tool: Add command line interface to filter and report attributes")
Signed-off-by: Mohammad Abu-Khader <mohammad.abukhader@hotmail.com>
Reviewed-by: David Gow <david@davidgow.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The test relies on the numeric values of the clockids.
As not all clocks are meant to be tested, this requires skipping some
clocks unconditionally, cluttering the result.
Use an equivalent, explicit list instead.
In addition to CLOCK_PROCESS_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID and
CLOCK_HWSPECIFIC which were unconditionally skipped before, this also
unconditionally skips CLOCK_MONOTONIC_RAW, CLOCK_MONOTONIC_COARSE and
CLOCK_REALTIME_COARSE. clock_nanosleep() is not supported for those.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-15-910cbd485390@linutronix.de
Currently the test for the sleep functionality itself and the one for
the remaining time are reported together. This makes the test output a
bit confusing, especially as the upcoming tests for auxiliary clocks
will have different results between the two parts.
Report each test part on its own.
This also allows continuing testing other clocks after a single one
has failed.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-13-910cbd485390@linutronix.de
An upcoming patch will remove the early exit on failure of a single
testcase. If a test fails because a timeout timer could not be deleted,
then that timeout timer might interfere with the following tettcases.
Exit the whole test case with a clear error message in this case.
Other failures are not problematic:
* If timer_settime() fails, a harmless unarmed timer is left around.
* The SIGALRM handler reconfigured for each call to
nanosleep_test_remaining() anyways.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-12-910cbd485390@linutronix.de
The test relies on the numeric values of the clockids.
As not all clocks are meant to be tested, this requires skipping some
clocks unconditionally, cluttering the result.
Use an equivalent, explicit list instead.
In addition to CLOCK_PROCESS_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID and
CLOCK_HWSPECIFIC which were unconditionally skipped before, this also
unconditionally skips CLOCK_MONOTONIC_RAW, CLOCK_MONOTONIC_COARSE and
CLOCK_REALTIME_COARSE. clock_nanosleep() is not supported for those.
Signed-off-by: Thomas Weißschuh (Schneider Electric) <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260803-auxclock-nanosleep-prep-v2-9-910cbd485390@linutronix.de
Pull probes fix from Masami Hiramatsu:
- Convert ELF entry point to file offset in uprobe test
Convert the ELF entry point address (e_entry) to a file offset using
LOAD segment headers in add_remove_uprobe test. This fixes uprobe
registration failures (-EINVAL) on non-PIE executables where vaddr
exceeds file size.
* tag 'probes-fixes-v7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
selftests/ftrace: Convert ELF entry point to file offset in uprobe test
Nothing in this file splices a socket whose last decrypt failed, so
the check that fails tls_sw_splice_read() on a broken connection can
be removed without a test noticing. Such a splice hands the
application plaintext that recvmsg() and read_sock() already refuse
to return.
Extend the bad_auth pattern. Corrupt an authenticated record, confirm
recvmsg() reports EBADMSG, then splice the same socket and require
EBADMSG again. A synchronous decrypt fails again on the still-queued
record, so only an async decrypt reaches EBADMSG through the
recorded-failure check alone.
bad_auth builds the same corrupted record, so its construction moves
into a helper the two tests share.
Signed-off-by: Chuck Lever <cel@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260806-tls-splice-crypto-fix-v1-2-a2624005a286@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a tdc case covering the leak fixed by the previous patch.
The test attaches "action ct" to a clsact ingress chain and injects ten
IPv6 frames whose nexthdr says hop-by-hop but which carry nothing after
the 40-byte header, so ipv6_find_hdr() fails and
tcf_ct_ipv6_is_fragment() returns -EPROTO.
Before the fix act_ct returned TC_ACT_CONSUMED for these packets, so
tc_run() never reached its TC_ACT_SHOT arm and the clsact drop counter
stayed at zero while the skbs leaked. After the fix the packets are
dropped properly and the counter reflects them, which is what the test
matches on:
before: Sent 476 bytes 11 pkt (dropped 0, overlimits 0 requeues 0)
after: Sent 400 bytes 10 pkt (dropped 10, overlimits 0 requeues 0)
Signed-off-by: Hyunjung Ko <hj351016@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260806101235.809370-2-hj351016@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fsopen() records the caller's user namespace in fc->user_ns and hands
back an ordinary file descriptor, so the task that issues
FSCONFIG_CMD_CREATE need not be the one that created the context.
mount_capable() authorizes that for a caller holding CAP_SYS_ADMIN in an
ancestor of fc->user_ns, which any unprivileged user has over a user
namespace it just created.
binfmt_misc and overlayfs used to WARN_ON() the mismatch. Add a test for
both. Also cover the handover within one user namespace. That is a
supported thing to do and has to keep working.
Link: https://patch.msgid.link/20260802-work-fill_super-warn-v1-3-4e987911a39a@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Merge cpufreq updates for 7.3-rc1:
- Minor fixes and cleanups in assorted cpufreq drivers (Dan Carpenter,
Guru Das Srinagesh, Haoxiang Li, Karl Mehltretter, Sasha Finkelstein,
and Pan Chuang)
- Fix cpufreq table creation and bios_limits() callback in the Rust
bindings (Priya Bala Govindasamy)
- Add IPQ5210 support to qcom-nvmem driver (Varadarajan Narayanan)
- Adjust the .adjust_perf() cpufreq driver callback to allow the
maximum performance value to be passed to drivers and update the
intel_pstate driver to use it (Rafael Wysocki)
- Set policy->cur to the actual requested frequency in the intel_pstate
driver when the performance policy is used (Rafael Wysocki)
- Simplify HWP handling on Broadwell processors in intel_pstate (Rafael
Wysocki)
- Fix setting minimum P-state at init time in intel_pstate (Rafael
Wysocki)
- Consolidate frequency values computation in intel_pstate and clean up
code in that driver (Rafael Wysocki)
- Add missing kernel-doc desciptions for structure and union members in
the amd-pstate driver (David Vernet)
- Handle missing policy in dynamic EPP callbacks in the amd-pstate
driver (EDAMAMEX)
- Introduce EXPORT_SYMBOL_FOR_PSTATE_UT() to export amd-pstate driver
symbols to the amd-pstate-ut subdriver (K Prateek Nayak)
- Add dynamic EPP as an "energy_performance_preference" mode in
amd-pstate, remove the "amd_dynamic_epp" kernel command line option
and the "dynamic_epp" sysfs attribute, and update the dynamic_epp
documentation accordingly (K Prateek Nayak)
- Add unit tests for CPPC Performance Priority and the "dynamic" EPP
mode in the amd-pstate driver (K Prateek Nayak)
- Set min_limit_freq based on bios_min_perf in amd-pstate and remove
the defensive check for bios_min_perf from it (K Prateek Nayak)
- Fix EPP return type and handle errors in amd-pstate during
initialization, toggle auto_sel in active mode on shared memory
systems, and cache the firmware programmed EPP value (Marco Scardovi)
- Skip tests in amd-pstate-ut if the amd-pstate driver is not in active
use (Qianheng Peng)
- Replace sprintf() with sysfs_emit() in sysfs show in the cpufreq
schedutil governor and fix a self-contradictory comment in
sugov_iowait_apply() (Zhongqiu Han)
- Fix the usage example for the sampling_rate tunable of the ondemand
cpufreq governor in admin-guide (wangxiaodong)
* pm-cpufreq: (40 commits)
cpufreq: imx6q: fix out-of-bounds write when probed more than once
cpufreq: imx6q: fix devres accumulation across driver rebind
rust: cpufreq: Fix temporary write in Registration::bios_limit_callback
rust: cpufreq: Add CPUFREQ_TABLE_END as last table entry in TableBuilder::to_table
cpufreq: intel_pstate: Adjust policy->cur in active mode to policy
cpufreq/amd-pstate: Document missing kernel-doc members
cpufreq/amd-pstate-ut: Add unit test for CPPC Performance Priority
cpufreq/amd-pstate-ut: Add unit test for "dynamic" EPP mode
cpufreq/amd-pstate: Reduce the scope of exported symbols
Documentation/amd-pstate: Update dynamic_epp documentation with new behavior
cpufreq/amd-pstate: Remove "amd_dynamic_epp" cmdline and "dynamic_epp" sysfs
cpufreq/amd-pstate: Add dynamic EPP as an "energy_performance_preference" mode
cpufreq/amd-pstate: Extract platform profile to EPP conversion into a helper
cpufreq/amd-pstate: Remove the defensive check for bios_min_perf
cpufreq/amd-pstate: Set min_limit_freq based on bios_min_perf
cpufreq: apple-soc: Calculate frequency as a 64-bit value
kselftest: cpufreq: Backup and restore governor for sptests
selftests/cpufreq: Remove unnecessary sudo from quick_shuffle()
selftests/cpufreq: Remove unused local variables from switch_show_governor()
cpufreq/amd-pstate: handle missing policy in dynamic EPP callbacks
...
The add_remove_uprobe test uses readelf -h to obtain the ELF entry
point (e_entry) and passes it directly as the offset to uprobe_events.
However, uprobe_events expects a file offset, not a virtual address.
For PIE binaries, the virtual address happens to equal the file offset
because the first LOAD segment has p_vaddr == p_offset, so the test
works by coincidence. But for non-PIE executables, e_entry is an
absolute virtual address that can far exceed the file size. When the
probe is enabled, uprobe_register() checks offset > i_size_read(inode)
and rejects it with -EINVAL.
Fix this by converting the virtual address to a file offset using the
ELF program headers: scan readelf -lW output for the LOAD segment
containing the entry point, then compute file_offset = e_entry -
p_vaddr + p_offset. For PIE binaries the result is unchanged; for
non-PIE binaries the offset is correctly translated.
The conversion uses only POSIX shell primitives, with no dependency on
gawk or perl.
Link: https://lore.kernel.org/all/20260807081512.2974757-3-qirui.001@bytedance.com/
Fixes: dc4b165855 ("selftests/ftrace: Use readelf to find entry point in uprobe test")
Cc: stable@vger.kernel.org
Signed-off-by: Rui Qi <qirui.001@bytedance.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Pull BPF fixes from Daniel Borkmann:
- Fix BPF verifier to preserve full pointer state for commuted
scalar += pointer arithmetic (Yiyang Chen, Eduard Zingerman)
- Fix a use-after-free of request sockets in the BPF TCP iterator
batching (Jose Fernandez)
- Fix a use-after-free of sk_redir in the BPF sockmap send verdict
path (Chengfeng Ye)
- Fix a netns reference imbalance in the BPF conntrack kfuncs
(Chengfeng Ye)
- Fix bpf_get_fsverity_digest() dynptr assumptions and silent
digest truncation (Eric Biggers)
- Fix bpf_tcp_{gen,check}_syncookie to check sk_state before
sk_protocol to make sure it is a full socket (Luxiao Xu)
- Fix rqspinlock to reset the tail when preserving the queue
on deadlock (Kumar Kartikeya Dwivedi)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
rqspinlock: Reset tail when preserving queue on deadlock
bpf: Check sk_state before sk_protocol in bpf_tcp_*_syncookie
fsverity: Fix silent truncation in bpf_get_fsverity_digest()
fsverity: Fix bpf_get_fsverity_digest() dynptr assumptions
bpf: tcp: Fix use-after-free in bpf_iter_tcp_established_batch()
bpf: Fix netns reference imbalance in conntrack kfuncs
bpf, sockmap: Fix sk_redir use-after-free in send verdict
selftests/bpf: Cover commuted pointer state propagation
bpf: Propagate untrusted pointer state in commuted arithmetic
bpf: Preserve pointer state for commuted arithmetic
bpf: Simplify sanitize_err() signature
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Looks like our attempt to keep the PRs smaller have only prevented
this one from getting even bigger. In the last 9 days there were
405 postings explicitly tagged with [PATCH net], vs 687 with [PATCH
net-next]. 37% of posted patches being fixes is pretty crazy, and
that's likely undercounting because LLM "researchers" more often post
fixes without knowing to tag the patches for specific trees. I don't
have historic data.
In any case, we keep adjusting the criteria. The next PR will be
smaller.
Current release - regressions:
- net: defer netdev KOBJ_ADD uevent until the device is published,
previously rtnl_lock would serialize the accesses vs publishing
- net: explicitly cancel work to avoid races with ref tracker exit
- qrtr: ns: raise lookup limit to 128
- eth: hns3: fix speed configuration residue after driver reload
Previous releases - regressions:
- tcp: do not change rcv_ssthresh in tcp_measure_rcv_mss(), regressed
flows with MSS and scaling_ratio variability
- Revert "net: thunderbolt: Enable end-to-end flow control also in
transmit", broke some platforms (no packets coming thru)
- eth: stmmac: resume PHY before hardware setup when opening the
interface
Previous releases - always broken:
- another pile of fixes for less common protocols (SCTP, TLS, SMC
etc.)
- close a couple of AF_PACKET bugs and ways it can build skbs
problematic for the rest of the stack
- bridge: mrp: fix uninitialised bytes on the wire
- net: devmem: prevent net-iov / page mixing, avoid crashes
- eth: atlantic: free RX pages of consumed but not refilled buffers"
* tag 'net-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (116 commits)
igc: fix netdev not re-attached after resume if interface is down
tls: don't abort the connection on signal-interrupted sends
net: avoid theoretical races with ref drain
net: Defer netdev KOBJ_ADD uevent until the device is published
MAINTAINERS: dpll: zl3073x: replace Prathosh Satish with Min Li
sctp: clear control chunk transport if it is being removed
net/atm: fix slab-out-of-bounds read in vcc_setsockopt()
s390/ism: Fix UAF of sba and ieq during ism_dev_exit()
packet: use consistent hard_header_len in TX_RING send path
packet: use consistent hard_header_len in non-ring send paths
net: remove CAP_SYS_RAWIO zero-padding in dev_validate_header
bnge: Fix resource leak in bnge_init_nic() error path
ptp: ocp: Fix board ID over-read
tls: rx: restore msg_iter before TLS 1.3 optimistic retry
selftests: tls: add a test for splicing onto a full plaintext record
tls: don't leave a full plaintext sk_msg ring unpushed
xdp: reject clones that overrun skb_shared_info tailroom
mptcp: reclaim forward-allocated memory on RX path errors
mptcp: fastopen: only mark MPTFO subflows with SYN data
mptcp: pm: fix memory leak from alloc-during-teardown race
...
tls_decrypt_sg() advances msg->msg_iter when it maps user pages for
the optimistic TLS 1.3 zero-copy path. If the decrypted record turns
out not to be unpadded application data, tls_decrypt_sw() retries into
a kernel skb, but leaves the iterator advanced.
The subsequent copy from the skb then writes decrypted bytes again at
a later point in the caller iovecs while recvmsg() reports only the
post-retry length. A TLS peer can trigger this after the receiver
enables TLS_RX_EXPECT_NO_PAD.
Revert the iterator by the number of bytes consumed by the optimistic
mapping before retrying without zero-copy.
Add a selftest which sends a TLS 1.3 control record with
TLS_RX_EXPECT_NO_PAD enabled and verifies that recvmsg() does not
overwrite later iovecs beyond the returned length.
Fixes: ce61327ce9 ("tls: rx: support optimistic decrypt to user buffer with TLS 1.3")
Cc: stable@vger.kernel.org
Signed-off-by: Jérémy Jean <Jeremy.Jean@oss.cyber.gouv.fr>
Link: https://patch.msgid.link/20260804125528.2139928-1-Jeremy.Jean@oss.cyber.gouv.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Splicing onto a plaintext sk_msg ring that is already full used to wrap the
ring and make the kernel oops in the scatterwalk once the record was
pushed.
Only the copy path leaves the ring full without pushing it, so splice until
the ring is one fragment short, add the last fragment with a one-byte
MSG_MORE send, and splice once more before pushing the record.
CONFIG_MAX_SKB_FRAGS is 17..45, so that last fragment follows between 16
and 44 splices; sweep that range to trigger the bug on any build.
Signed-off-by: chanyoung <ppoo1220@gmail.com>
Link: https://patch.msgid.link/20260804052837.49015-3-ppoo1220@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
check_transfer() compares the input and output files byte-by-byte using
`cmp -l "$in" "$out" | while read ...`. Because the while-loop body runs
in a subshell (the script sets neither lastpipe nor pipefail), the
fail_test call inside it -- which sets the global ret/last_test_failed --
and the `return 1` both act on the subshell, not on check_transfer().
check_transfer() thus always falls through to `return 0`, and any data
corruption affecting only the payload (leaving the subflow/PM counters
untouched) is silently reported as PASS.
Fixes: 8117dac3e7 ("selftests: mptcp: add invert check in check_transfer")
Cc: stable@vger.kernel.org
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-5-b8f496d71664@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The arm64 ABI selftests fail to compile due to missing include paths
for kernel headers, causing errors like incomplete type struct sock_filter
and implicit BPF macro declarations.
Add $(KHDR_INCLUDES) and -I$(top_srcdir)/tools/include to CFLAGS
to resolve the header search path. Also remove the hardcoded __NR_write
macro and include <asm/unistd.h> to obtain the correct syscall number.
Fixes: 21e37da120 ("kselftest/arm64: Add testcase for SECCOMP_RET_TRACE orig_x0 bypass")
Fixes: 2fcbc4adf9 ("kselftest/arm64: Add seccomp ptrace x0 bypass test")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202608021842.jp6IBrFi-lkp@intel.com/
Suggested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
