Use the correct kernel-doc format & notation to eliminate
kernel-doc warnings:
Warning: include/linux/platform_data/mlxreg.h:24 Enum value
'MLX_WDT_TYPE1' not described in enum 'mlxreg_wdt_type'
Warning: include/linux/platform_data/mlxreg.h:24 Enum value
'MLX_WDT_TYPE2' not described in enum 'mlxreg_wdt_type'
Warning: include/linux/platform_data/mlxreg.h:24 Enum value
'MLX_WDT_TYPE3' not described in enum 'mlxreg_wdt_type'
Warning: include/linux/platform_data/mlxreg.h:37 bad line:
PHYs ready / unready state;
Warning: include/linux/platform_data/mlxreg.h:153 struct member 'np'
not described in 'mlxreg_core_data'
Warning: include/linux/platform_data/mlxreg.h:153 struct member 'hpdev'
not described in 'mlxreg_core_data'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260226051232.549537-1-rdunlap@infradead.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Lenovo ThinkPad X1 Fold 16 Gen 1 has an OV5675 sensor (ACPI HID
OVTI5675) behind an INT3472 discrete PMIC controller. The INT3472
_DSM returns GPIO type 0x10 for one of the pins, which controls the
DOVDD (digital I/O power) regulator enable.
Type 0x10 is not currently handled by the driver, causing the GPIO to
be ignored with a warning. Add INT3472_GPIO_TYPE_DOVDD (0x10) and
handle it as a regulator with con_id "dovdd" to match the supply name
used by sensor drivers (e.g. ov5675).
Also increase GPIO_SUPPLY_NAME_LENGTH from 5 to 6 to accommodate
the "dovdd" name (5 chars + null terminator).
Signed-off-by: Leif Skunberg <diamondback@cohunt.app>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260210132129.17943-1-diamondback@cohunt.app
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystem changes for 7.0-rc1. Lots of little things in here,
including:
- Loads of iio driver changes and updates and additions
- gpib driver updates
- interconnect driver updates
- i3c driver updates
- hwtracing (coresight and intel) driver updates
- deletion of the obsolete mwave driver
- binder driver updates (rust and c versions)
- mhi driver updates (causing a merge conflict, see below)
- mei driver updates
- fsi driver updates
- eeprom driver updates
- lots of other small char and misc driver updates and cleanups
All of these have been in linux-next for a while, with no reported
issues"
* tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (297 commits)
mux: mmio: fix regmap leak on probe failure
rust_binder: return p from rust_binder_transaction_target_node()
drivers: android: binder: Update ARef imports from sync::aref
rust_binder: fix needless borrow in context.rs
iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin
iio: sca3000: Fix a resource leak in sca3000_probe()
iio: proximity: rfd77402: Add interrupt handling support
iio: proximity: rfd77402: Document device private data structure
iio: proximity: rfd77402: Use devm-managed mutex initialization
iio: proximity: rfd77402: Use kernel helper for result polling
iio: proximity: rfd77402: Align polling timeout with datasheet
iio: cros_ec: Allow enabling/disabling calibration mode
iio: frequency: ad9523: correct kernel-doc bad line warning
iio: buffer: buffer_impl.h: fix kernel-doc warnings
iio: gyro: itg3200: Fix unchecked return value in read_raw
MAINTAINERS: add entry for ADE9000 driver
iio: accel: sca3000: remove unused last_timestamp field
iio: accel: adxl372: remove unused int2_bitmask field
iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll()
iio: magnetometer: Remove IRQF_ONESHOT
...
Pull MIPS updates from Thomas Bogendoerfer:
"Cleanups and fixes"
* tag 'mips_7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (28 commits)
Revert "clk: microchip: core: allow driver to be compiled with COMPILE_TEST"
Revert "clk: microchip: fix typo in reference to a config option"
MIPS: Implement ARCH_HAS_CC_CAN_LINK
MIPS: rb532: Fix MMIO UART resource registration
MIPS: Work around LLVM bug when gp is used as global register variable
MIPS: Loongson64: env: Fixup serial clock-frequency when using LEFI
MIPS: Loongson2ef: Use pcibios_align_resource() to block io range
MIPS: Loongson2ef: Register PCI controller in early stage
clk: microchip: fix typo in reference to a config option
MIPS: Loongson64: dts: fix phy-related definition of LS7A GMAC
clk: microchip: core: allow driver to be compiled with COMPILE_TEST
MIPS: drop unused pic32.h header
watchdog: pic32-wdt: update include to use pic32.h from platform_data
watchdog: pic32-dmt: update include to use pic32.h from platform_data
serial: pic32_uart: update include to use pic32.h from platform_data
rtc: pic32: update include to use pic32.h from platform_data
pinctrl: pic32: update include to use pic32.h from platform_data
mmc: sdhci-pic32: update include to use pic32.h from platform_data
irqchip/irq-pic32-evic: update include to use pic32.h from platform_data
clk: microchip: core: update include to use pic32.h from platform_data
...
Pull x86 platform driver updates from Ilpo Järvinen:
"Highlights:
- amd/pmf:
- Avoid overwriting BIOS input values when events occur rapidly
- Fix PMF driver issues related to S4 (in part on crypto/ccp side)
- Add NPU metrics API (for accel side consumers)
- Allow disabling Smart PC function through a module parameter
- asus-wmi & HID/asus:
- Unification of backlight control (replaces quirks)
- Support multiple interfaces for controlling keyboard/RGB brightness
- Simplify init sequence
- hp-wmi:
- Add manual fan control for Victus S models
- Add fan mode keep-alive
- Fix platform profile values for Omen 16-wf1xxx
- Add EC offset to get the thermal profile
- intel/pmc: Show substate residencies also for non-primary PMCs
- intel/ISST:
- Store and restore data for all domains
- Write interface improvements
- lenovo-wmi:
- Support multiple Capability Data
- Add HWMON reporting and tuning support
- mellanox/mlx-platform: Add HI173 & HI174 support
- surface/aggregator_registry: Add Surface Pro 11 (QCOM)
- thinkpad_acpi: Add support for HW damage detection capability
- uniwill: Implement cTGP setting
- wmi:
- Introduce marshalling support
- Convert a few drivers to use the new buffer-based WMI API
- tools/power/x86/intel-speed-select: Allow read operations for non-root
- Miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (68 commits)
platform/x86: lenovo-wmi-{capdata,other}: Fix HWMON channel visibility
platform/x86: hp-wmi: Add EC offsets to read Victus S thermal profile
platform: mellanox: mlx-platform: Add support DGX flavor of next-generation 800GB/s ethernet switch.
platform: mellanox: mlx-platform: Add support for new Nvidia DGX system based on class VMOD0010
HID: asus: add support for the asus-wmi brightness handler
platform/x86: asus-wmi: add keyboard brightness event handler
platform/x86: asus-wmi: remove unused keyboard backlight quirk
HID: asus: listen to the asus-wmi brightness device instead of creating one
platform/x86: asus-wmi: Add support for multiple kbd led handlers
HID: asus: early return for ROG devices
HID: asus: move vendor initialization to probe
HID: asus: fortify keyboard handshake
HID: asus: use same report_id in response
HID: asus: initialize additional endpoints only for certain devices
HID: asus: simplify RGB init sequence
platform/wmi: string-kunit: Add missing oversized string test case
platform/x86/amd/pmf: Added a module parameter to disable the Smart PC function
platform/x86/uniwill: Implement cTGP setting
platform/x86: uniwill-laptop: Introduce device descriptor system
platform/x86/amd: Use scope-based cleanup for wbrf_record()
...
Pull sound updates from Takashi Iwai:
"It's been relatively calm for a new era; majority of changes are for
ASoC, mostly device-specific changes, while there are a bit of
cleanups in core stuff. A few SPI API and regmap updates are included
to be used by sound drivers, too.
Core:
- A few trivial cleanups about __free() and runtime PM macros
- Convert to new snd_seq_bus binding
ASoC:
- Generic SDCA support for reporting jack events
- Continuing platform support, cleanup and feature improvements for
AMD, Intel, Qualcomm and SOF code
- Platform description improvements for the Cirrus drivers
- Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo
CV1800B
HD- and USB-audio:
- Many quirks as usual"
* tag 'sound-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits)
ALSA: usb-audio: Add DSD support for iBasso DC04U
ALSA: mixer: oss: Add card disconnect checkpoints
ASoC: SOF: ipc4-control: Set correct error code in refresh_bytes_control
ASoC: SOF: Intel: select CONFIG_SND_HDA_EXT_CORE from SND_SOC_SOF_HDA_COMMON
ALSA: usb-audio: Add iface reset and delay quirk for AB13X USB Audio
ASoC: amd: maintainer information
ALSA: ctxfi: Add quirk for SE-300PCIE variant (160b:0102)
ALSA: hda/generic: fix typos in comments
ALSA: hda/realtek - Enable mute LEDs on HP ENVY x360 15-es0xxx
ALSA: hda/conexant: Add quirk for HP ZBook Studio G4
ASoC: fsl_asrc_dma: allocate memory from dma device
ASoC: fsl_asrc: Add support for i.MX952 platform
ASoC: fsl_asrc_m2m: Add option to start ASRC before DMA device for M2M
ASoC: dt-bindings: fsl,imx-asrc: Add support for i.MX952 platform
ALSA: oss: delete self assignment
ASoC: rockchip: spdif: Convert to FIELD_PREP
ASoC: rockchip: spdif: Fill IEC958 CS info per params
ASoC: rockchip: spdif: Add support for format S32_LE
ASoC: rockchip: spdif: Add support for set mclk rate
ASoC: rockchip: spdif: Swap PCM and DAI component registration order
...
Pull HID updates from Jiri Kosina:
- global switch of HID drivers to use pm_*ptr instead of #ifdef
CONFIG_PM* (Bastien Nocera)
- support for new firmware handling in intel-ish-hid (Vishnu Sankar)
- support for HID output reports in the Quicki2c in intel-thc (Even Xu)
- solidify register configuration updates in intel-thc (Even Xu)
- Support for Rock band 4 PS4 and PS5 guitars (Rosalie Wanders)
- fn lock and WMI fan control handling improvements in certain Asus
models (ROG, ProArt P16) (Ionut Nechita, Connor Belli)
- fix for potential NULL pointer dereference during warm reset in
intel-ish-hid (Ryan Lin)
- fix for potential NULL pointer derefence in probe error paths in
hid-pl (Oliver Neukum)
- various other small assorted fixes and new device ID additions /
device-specific quirks
* tag 'hid-for-linus-2026020901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (41 commits)
HID: sony: add dongle device IDs for CRKD Gibson SG
HID: Intel-thc-hid: Intel-thc: Fix wrong register fields updating
HID: intel-ish-hid: fix NULL-ptr-deref in ishtp_bus_remove_all_clients
HID: logitech-hidpp: Add support for Logitech K980
HID: logitech-dj: Differentiate "invalid device index" error
HID: sony: Use pm_ptr instead of #ifdef CONFIG_PM
HID: wacom: Use pm_ptr instead of #ifdef CONFIG_PM
HID: uclogic: Use pm_ptr instead of #ifdef CONFIG_PM
HID: hid-sensor-hub: Use pm_ptr instead of #ifdef CONFIG_PM
HID: picolcd_core: Use pm_ptr instead of #ifdef CONFIG_PM
HID: nintendo: Use pm_ptr instead of #ifdef CONFIG_PM
HID: logitech-dj: Use pm_ptr instead of #ifdef CONFIG_PM
HID: lenovo: Use pm_ptr instead of #ifdef CONFIG_PM
HID: asus: Use pm_ptr instead of #ifdef CONFIG_PM
HID: appletb-kbd: Use pm_ptr instead of #ifdef CONFIG_PM
HID: hid-alps: Use pm_ptr instead of #ifdef CONFIG_PM
HID: multitouch: add eGalaxTouch EXC3188 support
HID: elecom: Add support for ELECOM HUGE Plus M-HT1MRBK
HID: sony: add support for bluetooth Rock Band 4 PS4 guitars
HID: logitech-hidpp: Check maxfield in hidpp_get_report_length()
...
Pull chrome platform updates from Tzung-Bi Shih:
"New cros_ec_lightbar features:
- Report the number of exposed LED segments via sysfs
- Support large sequence of program to be transmitted
Fixes:
- Don't touch fwnode_handle::dev which is a private field
- Fix wrong assignment for response size in cros_ec_lightbar
Cleanups:
- Use acpi_get_local_u64_address() helper"
* tag 'chrome-platform-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: lightbar: Use flexible array member
platform/chrome: lightbar: Fix lightbar_program_ex alignment
platform/chrome: lightbar: Add support for large sequence
platform/chrome: lightbar: Report number of segments
platform/chrome: cros_ec_lightbar: Fix response size initialization
platform/chrome: cros_typec_switch: Use acpi_get_local_u64_address()
platform/chrome: cros_typec_switch: Don't touch struct fwnode_handle::dev
Pull SoC driver updates from Arnd Bergmann:
"There are are a number of to firmware drivers, in particular the TEE
subsystem:
- a bus callback for TEE firmware that device drivers can register to
- sysfs support for tee firmware information
- minor updates to platform specific TEE drivers for AMD, NXP,
Qualcomm and the generic optee driver
- ARM SCMI firmware refactoring to improve the protocol discover
among other fixes and cleanups
- ARM FF-A firmware interoperability improvements
The reset controller and memory controller subsystems gain support for
additional hardware platforms from Mediatek, Renesas, NXP, Canaan and
SpacemiT.
Most of the other changes are for random drivers/soc code. Among a
number of cleanups and newly added hardware support, including:
- Mediatek MT8196 DVFS power management and mailbox support
- Qualcomm SCM firmware and MDT loader refactoring, as part of the
new Glymur platform support.
- NXP i.MX9 System Manager firmware support for accessing the syslog
- Minor updates for TI, Renesas, Samsung, Apple, Marvell and AMD
SoCs"
* tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (171 commits)
bus: fsl-mc: fix an error handling in fsl_mc_device_add()
reset: spacemit: Add SpacemiT K3 reset driver
reset: spacemit: Extract common K1 reset code
reset: Create subdirectory for SpacemiT drivers
dt-bindings: soc: spacemit: Add K3 reset support and IDs
reset: canaan: k230: drop OF dependency and enable by default
reset: rzg2l-usbphy-ctrl: Add suspend/resume support
reset: rzg2l-usbphy-ctrl: Propagate the return value of regmap_field_update_bits()
reset: gpio: check the return value of gpiod_set_value_cansleep()
reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV
reset: imx8mp-audiomix: Extend the driver usage
reset: imx8mp-audiomix: Switch to using regmap API
reset: imx8mp-audiomix: Drop unneeded macros
soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove
soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses
soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID
soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support
soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create()
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
...
McASP has dedicated clock & frame sync registers for both transmit
and receive. Currently McASP driver only supports synchronous behavior and
couples both TX & RX settings.
Add logic that enables asynchronous mode via ti,async-mode property. In
async mode, playback & record can be done simultaneously with different
audio configurations (tdm slots, tdm width, audio bit depth).
Note the ability to have different tx/rx DSP formats (i2s, dsp_a, etc.),
while possible in hardware, remains to be a gap as it require changes
to the corresponding machine driver interface.
Existing IIS (sync mode) and DIT mode logic remains mostly unchanged.
Exceptions are IIS mode logic that previously assumed sync mode, which has
now been made aware of the distinction. And shared logic across all modes
also now checks for McASP tx/rx-specific driver attributes. Those
attributes have been populated according to the original extent, ensuring
no divergence in functionality.
Constraints no longer applicable for async mode are skipped.
Clock selection options have also been added to include rx/tx-only clk_ids,
exposing independent configuration via the machine driver as well.
Note that asynchronous mode is not applicable for McASP in DIT mode,
which is a transmitter-only mode to interface w/ self-clocking formats.
Signed-off-by: Sen Wang <sen@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Paresh Bhagat <p-bhagat@ti.com>
Link: https://patch.msgid.link/20260203003703.2334443-5-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Variable arrays should be defined as [], not [0], otherwise
the kernel complains:
memcpy : detected field-spanning write (size 9) of single field "param->set_program_ex.data" at drivers/platform/chrome/cros_ec_lightbar.c:603 (size 0)
Fixes: 9600b8bdbf ("platform/chrome: lightbar: Add support for large sequence")
Signed-off-by: Gwendal Grignou <gwendal@google.com>
Link: https://lore.kernel.org/r/20260204034848.697033-1-gwendal@google.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
There are currently some pic32 MIPS drivers that are in tree, and are
only configured to be compiled on the pic32 platform. There's a risk of
breaking some of these drivers when migrating drivers away from legacy
APIs. It happened to me with a pic32 clk driver.
Let's go ahead and copy the MIPS pic32.h header to
include/linux/platform_data/, and make a minor update to allow compiling
this on other architectures. This will make it easier, and cleaner to
enable COMPILE_TEST for some of these pic32 drivers.
The asm variant of the header file will be dropped once all drivers have
been updated.
Link: https://lore.kernel.org/linux-clk/CABx5tq+eOocJ41X-GSgkGy6S+s+Am1yCS099wqP695NtwALTmg@mail.gmail.com/T/
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
'calibrate' was a one-shot event sent to the sensor to calibrate itself.
It is used on Bosch sensors (BMI160, BMA254).
Light sensors work differently: They are first put in calibration mode,
tests are run to collect information and calculate the calibration
values to apply. Once done, the sensors are put back in normal mode.
Accept boolean true and false (not just true) to enter/exit calibration
state.
Check "echo 0 > calibrate" is supported.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The keyboard brightness control of Asus WMI keyboards is handled in
kernel, which leads to the shortcut going from brightness 0, to 1,
to 2, and 3.
However, for HID keyboards it is exposed as a key and handled by the
user's desktop environment. For the toggle button, this means that
brightness control becomes on/off. In addition, in the absence of a
DE, the keyboard brightness does not work.
Therefore, expose an event handler for the keyboard brightness control
which can then be used by hid-asus. Since this handler is called from
an interrupt context, defer the actual work to a workqueue.
In the process, introduce ASUS_EV_MAX_BRIGHTNESS to hold the constant
for maximum brightness since it is shared between hid-asus/asus-wmi.
Reviewed-by: Luke D. Jones <luke@ljones.dev>
Tested-by: Luke D. Jones <luke@ljones.dev>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Reviewed-by: Denis Benato <benato.denis96@gmail.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20260122075044.5070-11-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some devices, such as the Z13 have multiple Aura devices connected
to them by USB. In addition, they might have a WMI interface for
RGB. In Windows, Armoury Crate exposes a unified brightness slider
for all of them, with 3 brightness levels.
Therefore, to be synergistic in Linux, and support existing tooling
such as UPower, allow adding listeners to the RGB device of the WMI
interface. If WMI does not exist, lazy initialize the interface.
Since hid-asus and asus-wmi can both interact with the led objects
including from an atomic context, protect the brightness access with a
spinlock and update the values from a workqueue. Use this workqueue to
also process WMI keyboard events, so they are handled asynchronously.
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Reviewed-by: Denis Benato <benato.denis96@gmail.com>
Link: https://patch.msgid.link/20260122075044.5070-8-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add support for MIPI I3C Host Controllers with the Multi-Bus Instance
capability. These controllers can host multiple I3C buses (up to 15)
within a single hardware function (e.g., PCIe B/D/F), providing one
indepedent HCI register set and corresponding I3C bus controller logic
per bus.
A separate platform device will represent each instance, but it is
necessary to allow for shared resources.
Multi-bus instances share the same MMIO address space, but the ranges are
not guaranteed to be contiguous. To avoid overlapping mappings, pass
base_regs from the parent mapping to child devices.
Allow the IRQ to be shared among instances.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260106164416.67074-8-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add infrastructure for the HID driver to communicate with the asus-wmi
driver for handling special keys that require WMI communication.
This includes:
- Define ASUS_WMI_METHODID_NOTIF method ID in asus-wmi.h
- Implement asus_wmi_send_event() function to send events to asus-wmi
Reviewed-by: Denis Benato <benato.denis96@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Ionut Nechita <ionut_n2001@yahoo.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Pull x86 platform driver updates from Ilpo Järvinen:
- acer-wmi: Add PH16-72, PHN16-72, and PT14-51 fan control support
- acpi: platform_profile: Add max-power profile option (power draw
limited by the cooling hardware, may exceed battery power draw limit
when on AC power)
- amd/hsmp: Allow more than one data-fabric per socket
- asus-armoury: Add WMI attributes driver to expose miscellaneous WMI
functions through fw_attributes (deprecates the custom BIOS features
interface through asus-wmi)
- asus-wmi: Use brightness_set_blocking() for kbd led
- ayaneo-ec: Add Ayaneo Embedded Controller driver
- fs/nls:
- Fix utf16 to utf8 string conversion when output size restricted
- Improve error code consistency for utf8 to utf32 conversions
- ideapad-laptop: Fast (Rapid Charge) charge type support
- intel/hid: Add Dell Pro Rugged 10/12 tablet to VGBS DMI quirks
- intel/pmc:
- Arrow Lake telemetry GUID improvements
- Add support for Wildcat Lake PMC information
- intel_pmc_ipc: Fix ACPI buffer memleak
- intel/punit_ipc: Fix memory corruption
- intel/vsec: Wildcat Lake PMT telemetry support
- lenovo-wmi-gamezone: Map "Extreme" performance mode to max-power
- lg-laptop: Add support for the HDAP opregion field
- serial-multi-instantiate: Add IRQ_RESOURCE_OPT for IRQ missing
projects
- thinkpad-t14s-ec: Improve suspend/resume support (lid LEDs, keyboard
backlight)
- uniwill: Add Uniwill laptop driver
- wmi: Move under drivers/platform/wmi as non-x86 WMI support is around
the corner and other WMI features will require adding more C files as
well
- tools/power/x86/intel-speed-select: v1.24
- Check feature status to check if the feature enablement was
successful
- Reset SST-TF bucket structure to display valid bucket info
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (73 commits)
tools/power/x86/intel-speed-select: v1.24 release
tools/power/x86/intel-speed-select: Reset isst_turbo_freq_info for invalid buckets
tools/power/x86/intel-speed-select: Check feature status
platform/x86: asus-wmi: use brightness_set_blocking() for kbd led
fs/nls: Fix inconsistency between utf8_to_utf32() and utf32_to_utf8()
platform/x86: asus-armoury: add support for GA503QR
platform/x86: intel_pmc_ipc: fix ACPI buffer memory leak
platform/x86: hp-wmi: Order DMI board name arrays
platform/x86/intel/hid: Add Dell Pro Rugged 10/12 tablet to VGBS DMI quirks
platform: surface: replace use of system_wq with system_percpu_wq
platform: x86: replace use of system_wq with system_percpu_wq
platform/surface: acpi-notify: add WQ_PERCPU to alloc_workqueue users
platform/x86: wmi-gamezone: Add Legion Go 2 Quirks
platform/x86: lenovo-wmi-gamezone Use max-power rather than balanced-performance
acpi: platform_profile - Add max-power profile option
platform/x86/amd/pmf: Use devm_mutex_init() for mutex initialization
platform/x86/amd/pmf: Add BIOS_INPUTS_MAX macro to replace hardcoded array size
platform/x86: serial-multi-instantiate: Add IRQ_RESOURCE_OPT for IRQ missing projects
platform/x86/amd/pmf: Refactor repetitive BIOS output handling
platform/x86/uniwill: Add TUXEDO devices
...
Pull USB/Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.19-rc1. Nothing major here, just lots of tiny updates for most of
the common USB drivers. Included in here are:
- more xhci driver updates and fixes
- Thunderbolt driver cleanups
- usb serial driver updates
- typec driver updates
- USB tracepoint additions
- dwc3 driver updates, including support for Apple hardware
- lots of other smaller driver updates and cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (161 commits)
usb: gadget: tegra-xudc: Always reinitialize data toggle when clear halt
USB: serial: option: move Telit 0x10c7 composition in the right place
USB: serial: option: add Telit Cinterion FE910C04 new compositions
usb: typec: ucsi: fix use-after-free caused by uec->work
usb: typec: ucsi: fix probe failure in gaokun_ucsi_probe()
usb: dwc3: core: Remove redundant comment in core init
usb: phy: Initialize struct usb_phy list_head
USB: serial: option: add Foxconn T99W760
usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive.
usb: typec: hd3ss3220: Enable VBUS based on ID pin state
dt-bindings: usb: ti,hd3ss3220: Add support for VBUS based on ID state
usb: typec: anx7411: add WQ_PERCPU to alloc_workqueue users
USB: add WQ_PERCPU to alloc_workqueue users
dt-bindings: usb: dwc3-xilinx: Describe the reset constraint for the versal platform
drivers/usb/storage: use min() instead of min_t()
usb: raw-gadget: cap raw_io transfer length to KMALLOC_MAX_SIZE
usb: ohci-da8xx: remove unused platform data
usb: gadget: functionfs: use dma_buf_unmap_attachment_unlocked() helper
usb: uas: reduce time under spinlock
usb: dwc3: eic7700: Add EIC7700 USB driver
...
Pull backlight updates from Lee Jones:
"Additions:
- Add support for Awinic AW99706 backlight driver
Fixes:
- Add GPIOLIB dependency to backlight ktd2801 driver
- Add devlink to LED Backlight's supplier LEDs to enforce correct
removal order and prevent NULL pointer dereferences
- Fix kernel-doc warnings in lp855x.h
Removals:
- Do not include <linux/fb.h> in backlight.h
- Fix unused function warnings from suspend/resume ops in aw99706.c
by switching to DEFINE_SIMPLE_DEV_PM_OPS and using pm_ptr()
Bindings:
- Add Awinic AW99706 backlight binding to MAINTAINERS
- Add Awinic AW99706 backlight binding documentation"
* tag 'backlight-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: aw99706: Fix unused function warnings from suspend/resume ops
backlight: lp855x: Fix lp855x.h kernel-doc warnings
dt-bindings: leds: backlight: Add Awinic AW99706 backlight
backlight: aw99706: Add support for Awinic AW99706 backlight
backlight: led-bl: Add devlink to supplier LEDs
backlight: ktd2801: Depend on GPIOLIB
backlight: Do not include <linux/fb.h> in header file
Pull spi updates from Mark Brown:
"This release is almost entirely new drivers, with a couple of small
changes in generic code.
The biggest individual update is a rename of the existing Microchip
driver and the addition of a new driver for the silicon SPI controller
in their PolarFire SoCs. The overlap between the soft IP supported by
the current driver and this new one is regrettably all in the IP and
not in the register interface offered to software.
- Add a time offset parameter for offloads, allowing them to be
defined in relation to each other. This is useful for IIO type
applcations where you trigger an operation then read the result
after a delay.
- Add a tracepoint for flash exec_ops, bringing the flash support
more in line with the debuggability of vanilla SPI.
- Support for Airoha EN7523, Arduino MCUs, Aspeed AST2700, Microchip
PolarFire SPI controllers, NXP i.MX51 ECSPI target mode, Qualcomm
IPQ5414 and IPQ5332, Renesas RZ/T2H, RZ/V2N and RZ/2NH and SpacemiT
K1 QuadSPI.
There's also a small set of ASoC cleanups that I mistakenly applied to
the SPI tree and then put more stuff on top of before it was brought
to my attention, sorry about that"
* tag 'spi-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (80 commits)
spi: microchip-core: Refactor FIFO read and write handlers
spi: ch341: fix out-of-bounds memory access in ch341_transfer_one
spi: microchip-core: Remove unneeded PM related macro
spi: microchip-core: Use SPI_MODE_X_MASK
spi: microchip-core: Utilise temporary variable for struct device
spi: microchip-core: Replace dead code (-ENOMEM error message)
spi: microchip-core: use min() instead of min_t()
spi: dt-bindings: airoha: add compatible for EN7523
spi: airoha-snfi: en7523: workaround flash damaging if UART_TXD was short to GND
spi: dt-bindings: renesas,rzv2h-rspi: Document RZ/V2N SoC support
spi: dt-bindings: renesas,rzv2h-rspi: Document RZ/V2N SoC support
spi: microchip: Enable compile-testing for FPGA SPI controllers
spi: Fix potential uninitialized variable in probe()
spi: rzv2h-rspi: add support for RZ/T2H and RZ/N2H
spi: dt-bindings: renesas,rzv2h-rspi: document RZ/T2H and RZ/N2H
spi: rzv2h-rspi: add support for loopback mode
spi: rzv2h-rspi: add support for variable transfer clock
spi: rzv2h-rspi: add support for using PCLK for transfer clock
spi: rzv2h-rspi: make transfer clock rate finding chip-specific
spi: rzv2h-rspi: avoid recomputing transfer frequency
...
Add a missing struct short description and a missing leading " *" to
lp855x.h to avoid kernel-doc warnings:
Warning: include/linux/platform_data/lp855x.h:126 missing initial short
description on line:
* struct lp855x_platform_data
Warning: include/linux/platform_data/lp855x.h:131 bad line:
Only valid when mode is PWM_BASED.
Fixes: 7be865ab86 ("backlight: new backlight driver for LP855x devices")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Link: https://patch.msgid.link/20251111060916.1995920-1-rdunlap@infradead.org
Signed-off-by: Lee Jones <lee@kernel.org>
Adds the ppt_* and nv_* tuning knobs that are available via WMI methods
and adds proper min/max levels plus defaults.
The min/max are defined by ASUS and typically gained by looking at what
they allow in the ASUS Armoury Crate application - ASUS does not share
the values outside of this. It could also be possible to gain the AMD
values by use of ryzenadj and testing for the minimum stable value.
The general rule of thumb for adding to the match table is that if the
model range has a single CPU used throughout, then the DMI match can
omit the last letter of the model number as this is the GPU model.
If a min or max value is not provided it is assumed that the particular
setting is not supported. for example ppt_pl2_sppt_min/max is not set.
If a <ppt_setting>_def is not set then the default is assumed to be
<ppt_setting>_max
It is assumed that at least AC settings are available so that the
firmware attributes will be created - if no DC table is available
and power is on DC, then reading the attributes is -ENODEV.
Co-developed-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mateusz Schyboll <dragonn@op.pl>
Tested-by: Porfet Lillian <porfet828@gmail.com>
Link: https://patch.msgid.link/20251102215319.3126879-10-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The fw_attributes_class provides a much cleaner interface to all of the
attributes introduced to asus-wmi. This patch moves all of these extra
attributes over to fw_attributes_class, and shifts the bulk of these
definitions to a new kernel module to reduce the clutter of asus-wmi
with the intention of deprecating the asus-wmi attributes in future.
The work applies only to WMI methods which don't have a clearly defined
place within the sysfs and as a result ended up lumped together in
/sys/devices/platform/asus-nb-wmi/ with no standard API.
Where possible the fw attrs now implement defaults, min, max, scalar,
choices, etc. As en example dgpu_disable becomes:
/sys/class/firmware-attributes/asus-armoury/attributes/dgpu_disable/
├── current_value
├── display_name
├── possible_values
└── type
as do other attributes.
Co-developed-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://patch.msgid.link/20251102215319.3126879-3-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cross-merge networking fixes after downstream PR (net-6.18-rc5).
Conflicts:
drivers/net/wireless/ath/ath12k/mac.c
9222582ec5 ("Revert "wifi: ath12k: Fix missing station power save configuration"")
6917e268c4 ("wifi: ath12k: Defer vdev bring-up until CSA finalize to avoid stale beacon")
https://lore.kernel.org/11cece9f7e36c12efd732baa5718239b1bf8c950.camel@sipsolutions.net
Adjacent changes:
drivers/net/ethernet/intel/Kconfig
b1d16f7c00 ("libie: depend on DEBUG_FS when building LIBIE_FWLOG")
93f53db9f9 ("ice: switch to Page Pool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
regulator_unregister() already frees the associated GPIO device. On
ThinkPad X9 (Lunar Lake), this causes a double free issue that leads to
random failures when other drivers (typically Intel THC) attempt to
allocate interrupts. The root cause is that the reference count of the
pinctrl_intel_platform module unexpectedly drops to zero when this
driver defers its probe.
This behavior can also be reproduced by unloading the module directly.
Fix the issue by removing the redundant release of the GPIO device
during regulator unregistration.
Cc: stable@vger.kernel.org
Fixes: 1e5d088a52 ("platform/x86: int3472: Stop using devm_gpiod_get()")
Signed-off-by: Qiu Wenbo <qiuwenbo@kylinsec.com.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://patch.msgid.link/20251028063009.289414-1-qiuwenbo@gnome.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Pull input updates from Dmitry Torokhov:
- Conversions to yaml/json schema and fixes for input-related device
tree bindings
- New drivers:
- Awinic AW86927 haptic chip
- Hynitron CST816x series controller
- Himax HX852x(ES) touchscreen controller
- Fix uinput to not leak kernel memory via a gap in
uinput_ff_upload_compat structure
- Prevent overflow in pressure calculation in tsc2007 driver causing
phantom touches
- Make the Atmel maxTouch driver support generic touchscreen
configuration (flip, rotate, etc)
- Drop support for platform data in tca8418_keypad, pxa27x-keypad,
spear-keyboard and twl4030_keypad drivers, they all now rely on
generic device properties for configuration
- Other assorted changes and fixes
* tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (50 commits)
Input: atmel_mxt_ts - allow reset GPIO to sleep
Input: aw86927 - fix error code in probe()
Input: psxpad-spi - add a check for the return value of spi_setup()
Input: uinput - zero-initialize uinput_ff_upload_compat to avoid info leak
Input: aw86927 - add driver for Awinic AW86927
dt-bindings: input: Add Awinic AW86927
dt-bindings: touchscreen: remove touchscreen.txt
dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add touchscreen child node
dt-bindings: touchscreen: convert eeti bindings to json schema
Input: pm8941-pwrkey - disable wakeup for resin by default
dt-bindings: input: pm8941-pwrkey: Document wakeup-source property
Input: add driver for Hynitron CST816x series
dt-bindings: input: touchscreen: add hynitron cst816x series
Input: imx6ul_tsc - set glitch threshold by DTS property
dt-bindings: touchscreen: fsl,imx6ul-tsc: support glitch thresold
dt-bindings: touchscreen: add debounce-delay-us property
Input: ps2-gpio - fix typo
Input: atmel_mxt_ts - add support for generic touchscreen configurations
dt-bindings: input: maxtouch: add common touchscreen properties
dt-bindings: touchscreen: convert zet6223 bindings to json schema
...
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
Pull MTD updates from Miquel Raynal:
"MTD core:
- Bad blocks increment is skipped if the block is already known bad
(improves user statistics relevance)
- Expose the OOB layout via debugfs
Raw NAND:
- Add support for Loongson-2K1000 and Loongson-2K0500 NAND
controllers, including extra features, such as chip select
and 6-byte NAND ID reading support
- Drop the s3c2410 driver
SPI NAND:
- Important SPI NAND continuous read improvements and fixes
- Add support for FudanMicro FM25S01A
- Add support for continuous reads in Gigadevice vendor driver
ECC:
- Add support for the Realtek ECC engine
SPI NOR:
- Some flashes can't perform reads or writes with start or end being
an odd number in Octal DTR mode. File systems like UBIFS can
request such reads or writes, causing the transaction to error out.
Pad the read or write transactions with extra bytes to avoid this
problem.
And the usual amount of various miscellaneous fixes"
* tag 'mtd/for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (46 commits)
mtd: rawnand: sunxi: drop unused module alias
mtd: rawnand: stm32_fmc2: drop unused module alias
mtd: rawnand: rockchip: drop unused module alias
mtd: rawnand: pl353: drop unused module alias
mtd: rawnand: omap2: drop unused module alias
mtd: rawnand: atmel: drop unused module alias
mtd: onenand: omap2: drop unused module alias
mtd: hyperbus: hbmc-am654: drop unused module alias
mtd: jedec_probe: use struct_size() helper for cfiq allocation
mtd: cfi: use struct_size() helper for cfiq allocation
mtd: nand: raw: gpmi: fix clocks when CONFIG_PM=N
mtd: rawnand: omap2: fix device leak on probe failure
mtd: rawnand: atmel: Fix error handling path in atmel_nand_controller_add_nands
mtd: nand: realtek-ecc: Add Realtek external ECC engine support
dt-bindings: mtd: Add realtek,rtl9301-ecc
mtd: spinand: repeat reading in regular mode if continuous reading fails
mtd: spinand: try a regular dirmap if creating a dirmap for continuous reading fails
mtd: spinand: fix direct mapping creation sizes
mtd: rawnand: fsmc: Default to autodetect buswidth
mtd: nand: move nand_check_erased_ecc_chunk() to nand/core
...
Pull MMC updates from Ulf Hansson:
"MMC core:
- Improve RPMB frame handling code
- Add support for a new max-sd-hs-hz DT property to limit frequency
- Add support to manage regulator-under-voltage events
- Support regulator-under-voltage for eMMC to mitigate data
corruptions
- Add mmc_read_tuning() to allow a host to validate its tuning
sequence
- Add some helpers to align checks for CMD23 support
- Read the CCCR register for SDIO over SPI rather than the
unsupported CMD7
MMC host:
- Add COMPILE_TEST option for a couple of drivers
- Convert drivers to use the modern PM macros
- dw_mmc-exynos: Enable support for the Exynos8890 variant
- mmc_spi: Don't use crc ack during multiple block read
- renesas_sdhi: Enable 64-bit polling mode for R-Car gen3 and
RZ/G2L SoCs
- rtsx_usb: Add support for over-current-protection
- sdhci-cadence: Add support for multi-block read gap tuning
- sdhci-msm:
- Add support for tuning for SDR50 mode for SD cards
- Enable support for the Lemans variant
- sdhci-pci: Disable SD card clock before update for a few
Intel platforms
- sdhci-pxav3: Add support for UHS pinctrl settings
- tmio: Add 64-bit read/write support in polling mode
MEMSTICK:
- Convert to use timeouts to prevent indefinite waiting
- rtsx_usb: Add support for over-current-protection"
* tag 'mmc-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (77 commits)
dt-bindings: mmc: samsung,exynos-dw-mshc: add specific compatible for exynos8890
mmc: select REGMAP_MMIO with MMC_LOONGSON2
mmc: add COMPILE_TEST to multiple drivers
mmc: core: Improve RPMB frame handling code
mmc: core: Fix variable shadowing in mmc_route_rpmb_frames()
mmc: core: Parse and use the new max-sd-hs-hz DT property
dt-bindings: mmc: controller: Add max-sd-hs-hz property
mmc: sdhci-msm: Enable tuning for SDR50 mode for SD card
dt-bindings: mmc: sdhci-msm: Document the Lemans compatible
mmc: sh_mmcif: Remove dummy PM resume callback
dt-bindings: mmc: sdhci-pxa: Add minItems to pinctrl-names
mmc: sdio: Drop dev_pm_domain_detach() call
mmc: dw_mmc-rockchip: use modern PM macros
mmc: dw_mmc-pci: use modern PM macros
mmc: dw_mmc-k3: use modern PM macros
mmc: dw_mmc: exynos: use modern PM macros
mmc: via-sdmmc: use modern PM macros
mmc: sdhci-msm: use modern PM macros
mmc: mtk-sd: use modern PM macros
mmc: wmt-sdmmc: use modern PM macros
...
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Kontron SMARC-sAM67
- GPD device sensors
- MP29502
- MP2869, MP29608, MP29612 and MP29816 series
Added chip support to existing drivers:
- asus-ec-sensors:
Add B650E-I
Add PRIME Z270-A
Add Pro WS WRX90E-SAGE SE
Add ROG STRIX X670E-E GAMING WIFI
Add ROG STRIX X870-I GAMING WIFI
Add ROG STRIX X870E-E GAMING WIFI
Add ROG STRIX Z690-E GAMING WIFI
Add ROG STRIX Z790E GAMING WIFI II
Add STRIX B850-I GAMING WIFI
Add TUF GAMING X670E PLUS WIFI
Add X670E-I GAMING WIFI
Add Z790-I GAMING WIFI
- dell-smm: Add support for Dell OptiPlex 7040
- ina238: Major cleanup, and
Add support for INA700
Add support for INA780
- k10temp:
Add device ID for Strix Halo
Add support for AMD Family 1Ah-based models
- lenovo-ec-sensors: Update P8 supprt
- lm75: Add NXP P3T1750 support
- pmbus/adm1275: Add sq24905c support
- pmbus/isl68137: Add support for Renesas RAA228244 and RAA228246
- pmbus/mp5990: Add support for MP5998
- sht21: Add support for SHT20, SHT25
- sl28cpld: Add sa67mcu compatible
Other notable changes:
- core:
Handle locking internally
Introduce 64-bit energy attribute support
- cros_ec: Register into thermal framework, improve PWM control
- lm75: allow interrupt for ti,tmp75
- mlxreg-fan: Add support for new flavour of capability register
- sbtsi_temp: AMD CPU extended temperature range support
- sht21: Add devicetree support
Various other minor improvements and fixes"
* tag 'hwmon-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (86 commits)
dt-bindings: hwmon: (lm75) allow interrupt for ti,tmp75
hwmon: (mlxreg-fan) Add support for new flavour of capability register
hwmon: (mlxreg-fan) Separate methods of fan setting coming from different subsystems
hwmon: (cros_ec) register fans into thermal framework cooling devices
hwmon: (cros_ec) add PWM control over fans
platform/chrome: update pwm fan control host commands
hwmon: add SMARC-sAM67 support
dt-bindings: hwmon: sl28cpld: add sa67mcu compatible
hwmon: (asus-ec-sensors) add TUF GAMING X670E PLUS WIFI
hwmon: (dell-smm) Add support for Dell OptiPlex 7040
hwmon: (dell-smm) Add support for automatic fan mode
hwmon: (gpd-fan) complete Kconfig dependencies
hwmon: (asus-ec-sensors) increase timeout for locking ACPI mutex
hwmon: (asus-ec-sensors) add ROG STRIX X870E-E GAMING WIFI
hwmon: (dell-smm) Move clamping of fan speed out of i8k_set_fan()
hwmon: (dell-smm) Remove Dell Precision 490 custom config data
hwmon: (asus-ec-sensors) add ROG STRIX X670E-E GAMING WIFI
hwmon: (gpd-fan) Fix range check for pwm input
hwmon: (pmbus/mp5990) add support for MP5998
dt-bindings: trivial-devices: add mps,mp5998
...
Pull chrome platform updates from Tzung-Bi Shih:
"New:
- Add a new API cros_ec_device_registered() for checking if the
cros_ec_deivce is ready
Improvements:
- Use TRAILING_OVERLAP() to fix -Wflex-array-member-not-at-end
warning
- Defer probe until parent EC device is ready in cros_ec_keyb
Cleanups:
- Remove redundant and simplify code in cros_ec_chardev
- Centralize cros_ec_device allocation and initialization to remove
duplicate code"
* tag 'chrome-platform-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
Input: cros_ec_keyb - Defer probe until parent EC device is registered
platform/chrome: cros_ec: Add a flag to track registration state
platform/chrome: cros_ec: Separate initialization from cros_ec_register()
platform/chrome: Centralize common cros_ec_device initialization
platform/chrome: Centralize cros_ec_device allocation
platform/chrome: wilco_ec: Remove redundant semicolons
platform/chrome: cros_ec: Avoid -Wflex-array-member-not-at-end warning
platform/chrome: cros_ec_chardev: Decouple fops from struct cros_ec_dev
platform/chrome: cros_ec_chardev: Remove redundant struct field
Pull clocksource updates from Thomas Gleixner:
- Further preparations for modular clocksource/event drivers
- The usual device tree updates to support new chip variants and the
related changes to thise drivers
- Avoid a 64-bit division in the TEGRA186 driver, which caused a build
fail on 32-bit machines.
- Small fixes, improvements and cleanups all over the place
* tag 'timers-clocksource-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
dt-bindings: timer: exynos4210-mct: Add compatible for ARTPEC-9 SoC
clocksource/drivers/sh_cmt: Split start/stop of clock source and events
clocksource/drivers/clps711x: Fix resource leaks in error paths
clocksource/drivers/arm_global_timer: Add auto-detection for initial prescaler values
clocksource/drivers/ingenic-sysost: Convert from round_rate() to determine_rate()
clocksource/drivers/timer-tegra186: Don't print superfluous errors
clocksource/drivers/timer-rtl-otto: Simplify documentation
clocksource/drivers/timer-rtl-otto: Do not interfere with interrupts
clocksource/drivers/timer-rtl-otto: Drop set_counter function
clocksource/drivers/timer-rtl-otto: Work around dying timers
clocksource/drivers/timer-ti-dm : Capture functionality for OMAP DM timer
clocksource/drivers/arm_arch_timer_mmio: Add MMIO clocksource
clocksource/drivers/arm_arch_timer_mmio: Switch over to standalone driver
clocksource/drivers/arm_arch_timer: Add standalone MMIO driver
ACPI: GTDT: Generate platform devices for MMIO timers
clocksource/drivers/nxp-pit: Add NXP Automotive s32g2 / s32g3 support
dt: bindings: fsl,vf610-pit: Add compatible for s32g2 and s32g3
clocksource/drivers/vf-pit: Rename the VF PIT to NXP PIT
clocksource/drivers/vf-pit: Unify the function name for irq ack
clocksource/drivers/vf-pit: Consolidate calls to pit_*_disable/enable
...
