mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-05-29 14:47:19 -04:00
cc4a875cf3b3bc07d523ea85b8ca45da1ca4f4e6
69883 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
9187210eee |
Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps
etc) lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core instead
of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length and
budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global
config variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug of
ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for use
on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code:
- Enforce VM_IOREMAP flag and range in ioremap_page_range and
introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
bpf_arena).
- Rework selftest harness to enable the use of the full range of ksft
exit code (pass, fail, skip, xfail, xpass).
Netfilter:
- Allow userspace to define a table that is exclusively owned by a
daemon (via netlink socket aliveness) without auto-removing this
table when the userspace program exits. Such table gets marked as
orphaned and a restarting management daemon can re-attach/regain
ownership.
- Speed up element insertions to nftables' concatenated-ranges set
type. Compact a few related data structures.
BPF:
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between
BPF program and user space where structures inside the arena can
have pointers to other areas of the arena, and pointers work
seamlessly for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the
verifier and the program. The verifier allows the program to loop
assuming it's behaving well, but reserves the right to terminate
it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops
type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF
firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF
objects.
Wireless:
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API:
- Major overhaul of the Energy Efficient Ethernet internals to
support new link modes (2.5GE, 5GE), share more code between
drivers (especially those using phylib), and encourage more
uniform behavior. Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from
drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc:
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions, and
packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message
encapsulation or "Netlink polymorphism", where interpretation of
nested attributes depends on link type, classifier type or some
other "class type".
Drivers:
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic on CAN
BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO)
support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs
to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro"
* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
nexthop: Fix out-of-bounds access during attribute validation
nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
nexthop: Only parse NHA_OP_FLAGS for get messages that require it
bpf: move sleepable flag from bpf_prog_aux to bpf_prog
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
selftests/bpf: Add kprobe multi triggering benchmarks
ptp: Move from simple ida to xarray
vxlan: Remove generic .ndo_get_stats64
vxlan: Do not alloc tstats manually
devlink: Add comments to use netlink gen tool
nfp: flower: handle acti_netdevs allocation failure
net/packet: Add getsockopt support for PACKET_COPY_THRESH
net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
selftests/bpf: Add bpf_arena_htab test.
selftests/bpf: Add bpf_arena_list test.
selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
bpf: Add helper macro bpf_addr_space_cast()
libbpf: Recognize __arena global variables.
bpftool: Recognize arena map type
...
|
||
|
Linus Torvalds
|
1f44039766 |
Merge tag 'docs-6.9' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A moderatly busy cycle for development this time around.
- Some cleanup of the main index page for easier navigation
- Rework some of the other top-level pages for better readability
and, with luck, fewer merge conflicts in the future.
- Submit-checklist improvements, hopefully the first of many.
- New Italian translations
- A fair number of kernel-doc fixes and improvements. We have also
dropped the recommendation to use an old version of Sphinx.
- A new document from Thorsten on bisection
... and lots of fixes and updates"
* tag 'docs-6.9' of git://git.lwn.net/linux: (54 commits)
docs: verify/bisect: fixes, finetuning, and support for Arch
docs: Makefile: Add dependency to $(YNL_INDEX) for targets other than htmldocs
docs: Move ja_JP/howto.rst to ja_JP/process/howto.rst
docs: submit-checklist: use subheadings
docs: submit-checklist: structure by category
docs: new text on bisecting which also covers bug validation
docs: drop the version constraints for sphinx and dependencies
docs: kerneldoc-preamble.sty: Remove code for Sphinx <2.4
docs: Restore "smart quotes" for quotes
docs/zh_CN: accurate translation of "function"
docs: Include simplified link titles in main index
docs: Correct formatting of title in admin-guide/index.rst
docs: kernel_feat.py: fix build error for missing files
MAINTAINERS: Set the field name for subsystem profile section
kasan: Add documentation for CONFIG_KASAN_EXTRA_INFO
Fixed case issue with 'fault-injection' in documentation
kernel-doc: handle #if in enums as well
Documentation: update mailing list addresses
doc: kerneldoc.py: fix indentation
scripts/kernel-doc: simplify signature printing
...
|
||
|
Linus Torvalds
|
216532e147 |
Merge tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As is pretty normal for this tree, there are changes all over the
place, especially for small fixes, selftest improvements, and improved
macro usability.
Some header changes ended up landing via this tree as they depended on
the string header cleanups. Also, a notable set of changes is the work
for the reintroduction of the UBSAN signed integer overflow sanitizer
so that we can continue to make improvements on the compiler side to
make this sanitizer a more viable future security hardening option.
Summary:
- string.h and related header cleanups (Tanzir Hasan, Andy
Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev,
Harshit Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure
(Michael Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob
Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer"
* tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (51 commits)
selftests/powerpc: Fix load_unaligned_zeropad build failure
string: Convert helpers selftest to KUnit
string: Convert selftest to KUnit
sh: Fix build with CONFIG_UBSAN=y
compiler.h: Explain how __is_constexpr() works
overflow: Allow non-type arg to type_max() and type_min()
VMCI: Fix possible memcpy() run-time warning in vmci_datagram_invoke_guest_handler()
lib/string_helpers: Add flags param to string_get_size()
x86, relocs: Ignore relocations in .notes section
objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks
overflow: Use POD in check_shl_overflow()
lib: stackinit: Adjust target string to 8 bytes for m68k
sparc: vdso: Disable UBSAN instrumentation
kernel.h: Move lib/cmdline.c prototypes to string.h
leaking_addresses: Provide mechanism to scan binary files
leaking_addresses: Ignore input device status lines
leaking_addresses: Use File::Temp for /tmp files
MAINTAINERS: Update LEAKING_ADDRESSES details
fortify: Improve buffer overflow reporting
fortify: Add KUnit tests for runtime overflows
...
|
||
|
Linus Torvalds
|
3bf95d567d |
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux
Pull fscrypt updates from Eric Biggers: "Fix flakiness in a test by releasing the quota synchronously when a key is removed, and other minor cleanups" * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux: fscrypt: shrink the size of struct fscrypt_inode_info slightly fscrypt: write CBC-CTS instead of CTS-CBC fscrypt: clear keyring before calling key_put() fscrypt: explicitly require that inode->i_blkbits be set |
||
|
Linus Torvalds
|
2184dbcde4 |
Merge tag 'soc-drivers-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"This is the usual mix of updates for drivers that are used on (mostly
ARM) SoCs with no other top-level subsystem tree, including:
- The SCMI firmware subsystem gains support for version 3.2 of the
specification and updates to the notification code
- Feature updates for Tegra and Qualcomm platforms for added hardware
support
- A number of platforms get soc_device additions for identifying
newly added chips from Renesas, Qualcomm, Mediatek and Google
- Trivial improvements for firmware and memory drivers amongst
others, in particular 'const' annotations throughout multiple
subsystems"
* tag 'soc-drivers-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
tee: make tee_bus_type const
soc: qcom: aoss: add missing kerneldoc for qmp members
soc: qcom: geni-se: drop unused kerneldoc struct geni_wrapper param
soc: qcom: spm: fix building with CONFIG_REGULATOR=n
bus: ti-sysc: constify the struct device_type usage
memory: stm32-fmc2-ebi: keep power domain on
memory: stm32-fmc2-ebi: add MP25 RIF support
memory: stm32-fmc2-ebi: add MP25 support
memory: stm32-fmc2-ebi: check regmap_read return value
dt-bindings: memory-controller: st,stm32: add MP25 support
dt-bindings: bus: imx-weim: convert to YAML
watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
MAINTAINERS: Update SCMI entry with HWMON driver
MAINTAINERS: samsung: gs101: match patches touching Google Tensor SoC
memory: tegra: Fix indentation
memory: tegra: Add BPMP and ICC info for DLA clients
memory: tegra: Correct DLA client names
dt-bindings: memory: renesas,rpc-if: Document R-Car V4M support
firmware: arm_scmi: Update the supported clock protocol version
...
|
||
|
Linus Torvalds
|
306bee64b7 |
Merge tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC device tree updates from Arnd Bergmann:
"There is very little going on with new SoC support this time, all the
new chips are variations of others that we already support, and they
are all based on ARMv8 cores:
- Mediatek MT7981B (Filogic 820) and MT7988A (Filogic 880) are
networking SoCs designed to be used in wireless routers, similar to
the already supported MT7986A (Filogic 830).
- NXP i.MX8DXP is a variant of i.MX8QXP, with two CPU cores less.
These are used in many embedded and industrial applications.
- Renesas R8A779G2 (R-Car V4H ES2.0) and R8A779H0 (R-Car V4M) are
automotive SoCs.
- TI J722S is another automotive variant of its K3 family, related to
the AM62 series.
There are a total of 7 new arm32 machines and 45 arm64 ones, including
- Two Android phones based on the old Tegra30 chip
- Two machines using Cortex-A53 SoCs from Allwinner, a mini PC and a
SoM development board
- A set-top box using Amlogic Meson G12A S905X2
- Eight embedded board using NXP i.MX6/8/9
- Three machines using Mediatek network router chips
- Ten Chromebooks, all based on Mediatek MT8186
- One development board based on Mediatek MT8395 (Genio 1200)
- Seven tablets and phones based on Qualcomm SoCs, most of them from
Samsung.
- A third development board for Qualcomm SM8550 (Snapdragon 8 Gen 2)
- Three variants of the "White Hawk" board for Renesas automotive
SoCs
- Ten Rockchips RK35xx based machines, including NAS, Tablet, Game
console and industrial form factors.
- Three evaluation boards for TI K3 based SoCs
The other changes are mainly the usual feature additions for existing
hardware, cleanups, and dtc compile time fixes. One notable change is
the inclusion of PowerVR SGX GPU nodes on TI SoCs"
* tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (824 commits)
riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig
riscv: dts: starfive: jh7100: fix root clock names
ARM: dts: samsung: exynos4412: decrease memory to account for unusable region
arm64: dts: qcom: sm8250-xiaomi-elish: set rotation
arm64: dts: qcom: sm8650: Fix SPMI channels size
arm64: dts: qcom: sm8550: Fix SPMI channels size
arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433
arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure
arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector
dt-bindings: soc: renesas: renesas-soc: Add pattern for gray-hawk
dtc: Enable dtc interrupt_provider check
arm64: dts: st: add video encoder support to stm32mp255
arm64: dts: st: add video decoder support to stm32mp255
ARM: dts: stm32: enable crypto accelerator on stm32mp135f-dk
ARM: dts: stm32: enable CRC on stm32mp135f-dk
ARM: dts: stm32: add CRC on stm32mp131
ARM: dts: add stm32f769-disco-mb1166-reva09
ARM: dts: stm32: add display support on stm32f769-disco
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco
ARM: dts: stm32: add DSI support on stm32f769
...
|
||
|
Linus Torvalds
|
b29f377119 |
Merge tag 'x86-boot-2024-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
- Continuing work by Ard Biesheuvel to improve the x86 early startup
code, with the long-term goal to make it position independent:
- Get rid of early accesses to global objects, either by moving
them to the stack, deferring the access until later, or dropping
the globals entirely
- Move all code that runs early via the 1:1 mapping into
.head.text, and move code that does not out of it, so that build
time checks can be added later to ensure that no inadvertent
absolute references were emitted into code that does not
tolerate them
- Remove fixup_pointer() and occurrences of __pa_symbol(), which
rely on the compiler emitting absolute references, which is not
guaranteed
- Improve the early console code
- Add early console message about ignored NMIs, so that users are at
least warned about their existence - even if we cannot do anything
about them
- Improve the kexec code's kernel load address handling
- Enable more X86S (simplified x86) bits
- Simplify early boot GDT handling
- Micro-optimize the boot code a bit
- Misc cleanups
* tag 'x86-boot-2024-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86/sev: Move early startup code into .head.text section
x86/sme: Move early SME kernel encryption handling into .head.text
x86/boot: Move mem_encrypt= parsing to the decompressor
efi/libstub: Add generic support for parsing mem_encrypt=
x86/startup_64: Simplify virtual switch on primary boot
x86/startup_64: Simplify calculation of initial page table address
x86/startup_64: Defer assignment of 5-level paging global variables
x86/startup_64: Simplify CR4 handling in startup code
x86/boot: Use 32-bit XOR to clear registers
efi/x86: Set the PE/COFF header's NX compat flag unconditionally
x86/boot/64: Load the final kernel GDT during early boot directly, remove startup_gdt[]
x86/boot/64: Use RIP_REL_REF() to access early_top_pgt[]
x86/boot/64: Use RIP_REL_REF() to access early page tables
x86/boot/64: Use RIP_REL_REF() to access '__supported_pte_mask'
x86/boot/64: Use RIP_REL_REF() to access early_dynamic_pgts[]
x86/boot/64: Use RIP_REL_REF() to assign 'phys_base'
x86/boot/64: Simplify global variable accesses in GDT/IDT programming
x86/trampoline: Bypass compat mode in trampoline_start64() if not needed
kexec: Allocate kernel above bzImage's pref_address
x86/boot: Add a message about ignored early NMIs
...
|
||
|
Linus Torvalds
|
0e33cf955f |
Merge tag 'rfds-for-linus-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RFDS mitigation from Dave Hansen: "RFDS is a CPU vulnerability that may allow a malicious userspace to infer stale register values from kernel space. Kernel registers can have all kinds of secrets in them so the mitigation is basically to wait until the kernel is about to return to userspace and has user values in the registers. At that point there is little chance of kernel secrets ending up in the registers and the microarchitectural state can be cleared. This leverages some recent robustness fixes for the existing MDS vulnerability. Both MDS and RFDS use the VERW instruction for mitigation" * tag 'rfds-for-linus-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: KVM/x86: Export RFDS_NO and RFDS_CLEAR to guests x86/rfds: Mitigate Register File Data Sampling (RFDS) Documentation/hw-vuln: Add documentation for RFDS x86/mmio: Disable KVM mitigation when X86_FEATURE_CLEAR_CPU_BUF is set |
||
|
Ingo Molnar
|
2e2bc42c83 |
Merge branch 'linus' into x86/boot, to resolve conflict
There's a new conflict with Linus's upstream tree, because in the following merge conflict resolution in <asm/coco.h>: |
||
|
Jakub Kicinski
|
ed1f164038 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Merge in late fixes to prepare for the 6.9 net-next PR. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
685d982112 |
Merge tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
- The biggest change is the rework of the percpu code, to support the
'Named Address Spaces' GCC feature, by Uros Bizjak:
- This allows C code to access GS and FS segment relative memory
via variables declared with such attributes, which allows the
compiler to better optimize those accesses than the previous
inline assembly code.
- The series also includes a number of micro-optimizations for
various percpu access methods, plus a number of cleanups of %gs
accesses in assembly code.
- These changes have been exposed to linux-next testing for the
last ~5 months, with no known regressions in this area.
- Fix/clean up __switch_to()'s broken but accidentally working handling
of FPU switching - which also generates better code
- Propagate more RIP-relative addressing in assembly code, to generate
slightly better code
- Rework the CPU mitigations Kconfig space to be less idiosyncratic, to
make it easier for distros to follow & maintain these options
- Rework the x86 idle code to cure RCU violations and to clean up the
logic
- Clean up the vDSO Makefile logic
- Misc cleanups and fixes
* tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/idle: Select idle routine only once
x86/idle: Let prefer_mwait_c1_over_halt() return bool
x86/idle: Cleanup idle_setup()
x86/idle: Clean up idle selection
x86/idle: Sanitize X86_BUG_AMD_E400 handling
sched/idle: Conditionally handle tick broadcast in default_idle_call()
x86: Increase brk randomness entropy for 64-bit systems
x86/vdso: Move vDSO to mmap region
x86/vdso/kbuild: Group non-standard build attributes and primary object file rules together
x86/vdso: Fix rethunk patching for vdso-image-{32,64}.o
x86/retpoline: Ensure default return thunk isn't used at runtime
x86/vdso: Use CONFIG_COMPAT_32 to specify vdso32
x86/vdso: Use $(addprefix ) instead of $(foreach )
x86/vdso: Simplify obj-y addition
x86/vdso: Consolidate targets and clean-files
x86/bugs: Rename CONFIG_RETHUNK => CONFIG_MITIGATION_RETHUNK
x86/bugs: Rename CONFIG_CPU_SRSO => CONFIG_MITIGATION_SRSO
x86/bugs: Rename CONFIG_CPU_IBRS_ENTRY => CONFIG_MITIGATION_IBRS_ENTRY
x86/bugs: Rename CONFIG_CPU_UNRET_ENTRY => CONFIG_MITIGATION_UNRET_ENTRY
x86/bugs: Rename CONFIG_SLS => CONFIG_MITIGATION_SLS
...
|
||
|
Linus Torvalds
|
b0402403e5 |
Merge tag 'edac_updates_for_v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov: - Add a FRU (Field Replaceable Unit) memory poison manager which collects and manages previously encountered hw errors in order to save them to persistent storage across reboots. Previously recorded errors are "replayed" upon reboot in order to poison memory which has caused said errors in the past. The main use case is stacked, on-chip memory which cannot simply be replaced so poisoning faulty areas of it and thus making them inaccessible is the only strategy to prolong its lifetime. - Add an AMD address translation library glue which converts the reported addresses of hw errors into system physical addresses in order to be used by other subsystems like memory failure, for example. Add support for MI300 accelerators to that library. - igen6: Add support for Alder Lake-N SoC - i10nm: Add Grand Ridge support - The usual fixlets and cleanups * tag 'edac_updates_for_v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/versal: Convert to platform remove callback returning void RAS/AMD/FMPM: Fix off by one when unwinding on error RAS/AMD/FMPM: Add debugfs interface to print record entries RAS/AMD/FMPM: Save SPA values RAS: Export helper to get ras_debugfs_dir RAS/AMD/ATL: Fix bit overflow in denorm_addr_df4_np2() RAS: Introduce a FRU memory poison manager RAS/AMD/ATL: Add MI300 row retirement support Documentation: Move RAS section to admin-guide EDAC/versal: Make the bit position of injected errors configurable EDAC/i10nm: Add Intel Grand Ridge micro-server support EDAC/igen6: Add one more Intel Alder Lake-N SoC support RAS/AMD/ATL: Add MI300 DRAM to normalized address translation support RAS/AMD/ATL: Fix array overflow in get_logical_coh_st_fabric_id_mi300() RAS/AMD/ATL: Add MI300 support Documentation: RAS: Add index and address translation section EDAC/amd64: Use new AMD Address Translation Library RAS: Introduce AMD Address Translation Library EDAC/synopsys: Convert to devm_platform_ioremap_resource() |
||
|
Jakub Kicinski
|
5f20e6ab1f |
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says: ==================== pull-request: bpf-next 2024-03-11 We've added 59 non-merge commits during the last 9 day(s) which contain a total of 88 files changed, 4181 insertions(+), 590 deletions(-). The main changes are: 1) Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce VM_SPARSE kind and vm_area_[un]map_pages to be used in bpf_arena, from Alexei. 2) Introduce bpf_arena which is sparse shared memory region between bpf program and user space where structures inside the arena can have pointers to other areas of the arena, and pointers work seamlessly for both user-space programs and bpf programs, from Alexei and Andrii. 3) Introduce may_goto instruction that is a contract between the verifier and the program. The verifier allows the program to loop assuming it's behaving well, but reserves the right to terminate it, from Alexei. 4) Use IETF format for field definitions in the BPF standard document, from Dave. 5) Extend struct_ops libbpf APIs to allow specify version suffixes for stuct_ops map types, share the same BPF program between several map definitions, and other improvements, from Eduard. 6) Enable struct_ops support for more than one page in trampolines, from Kui-Feng. 7) Support kCFI + BPF on riscv64, from Puranjay. 8) Use bpf_prog_pack for arm64 bpf trampoline, from Puranjay. 9) Fix roundup_pow_of_two undefined behavior on 32-bit archs, from Toke. ==================== Link: https://lore.kernel.org/r/20240312003646.8692-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
1f75619a72 |
Merge tag 'x86_misc_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Borislav Petkov: - Fix a wrong check in the function reporting whether a CPU executes (or not) a NMI handler - Ratelimit unknown NMIs messages in order to not potentially slow down the machine - Other fixlets * tag 'x86_misc_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/nmi: Fix the inverse "in NMI handler" check Documentation/maintainer-tip: Add C++ tail comments exception Documentation/maintainer-tip: Add Closes tag x86/nmi: Rate limit unknown NMI messages Documentation/kernel-parameters: Add spec_rstack_overflow to mitigations=off |
||
|
Linus Torvalds
|
38b334fc76 |
Merge tag 'x86_sev_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov: - Add the x86 part of the SEV-SNP host support. This will allow the kernel to be used as a KVM hypervisor capable of running SNP (Secure Nested Paging) guests. Roughly speaking, SEV-SNP is the ultimate goal of the AMD confidential computing side, providing the most comprehensive confidential computing environment up to date. This is the x86 part and there is a KVM part which did not get ready in time for the merge window so latter will be forthcoming in the next cycle. - Rework the early code's position-dependent SEV variable references in order to allow building the kernel with clang and -fPIE/-fPIC and -mcmodel=kernel - The usual set of fixes, cleanups and improvements all over the place * tag 'x86_sev_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) x86/sev: Disable KMSAN for memory encryption TUs x86/sev: Dump SEV_STATUS crypto: ccp - Have it depend on AMD_IOMMU iommu/amd: Fix failure return from snp_lookup_rmpentry() x86/sev: Fix position dependent variable references in startup code crypto: ccp: Make snp_range_list static x86/Kconfig: Remove CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT Documentation: virt: Fix up pre-formatted text block for SEV ioctls crypto: ccp: Add the SNP_SET_CONFIG command crypto: ccp: Add the SNP_COMMIT command crypto: ccp: Add the SNP_PLATFORM_STATUS command x86/cpufeatures: Enable/unmask SEV-SNP CPU feature KVM: SEV: Make AVIC backing, VMSA and VMCB memory allocation SNP safe crypto: ccp: Add panic notifier for SEV/SNP firmware shutdown on kdump iommu/amd: Clean up RMP entries for IOMMU pages during SNP shutdown crypto: ccp: Handle legacy SEV commands when SNP is enabled crypto: ccp: Handle non-volatile INIT_EX data when SNP is enabled crypto: ccp: Handle the legacy TMR allocation when SNP is enabled x86/sev: Introduce an SNP leaked pages list crypto: ccp: Provide an API to issue SEV and SNP commands ... |
||
|
Linus Torvalds
|
720c857907 |
Merge tag 'x86-fred-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 FRED support from Thomas Gleixner:
"Support for x86 Fast Return and Event Delivery (FRED).
FRED is a replacement for IDT event delivery on x86 and addresses most
of the technical nightmares which IDT exposes:
1) Exception cause registers like CR2 need to be manually preserved
in nested exception scenarios.
2) Hardware interrupt stack switching is suboptimal for nested
exceptions as the interrupt stack mechanism rewinds the stack on
each entry which requires a massive effort in the low level entry
of #NMI code to handle this.
3) No hardware distinction between entry from kernel or from user
which makes establishing kernel context more complex than it needs
to be especially for unconditionally nestable exceptions like NMI.
4) NMI nesting caused by IRET unconditionally reenabling NMIs, which
is a problem when the perf NMI takes a fault when collecting a
stack trace.
5) Partial restore of ESP when returning to a 16-bit segment
6) Limitation of the vector space which can cause vector exhaustion
on large systems.
7) Inability to differentiate NMI sources
FRED addresses these shortcomings by:
1) An extended exception stack frame which the CPU uses to save
exception cause registers. This ensures that the meta information
for each exception is preserved on stack and avoids the extra
complexity of preserving it in software.
2) Hardware interrupt stack switching is non-rewinding if a nested
exception uses the currently interrupt stack.
3) The entry points for kernel and user context are separate and GS
BASE handling which is required to establish kernel context for
per CPU variable access is done in hardware.
4) NMIs are now nesting protected. They are only reenabled on the
return from NMI.
5) FRED guarantees full restore of ESP
6) FRED does not put a limitation on the vector space by design
because it uses a central entry points for kernel and user space
and the CPUstores the entry type (exception, trap, interrupt,
syscall) on the entry stack along with the vector number. The
entry code has to demultiplex this information, but this removes
the vector space restriction.
The first hardware implementations will still have the current
restricted vector space because lifting this limitation requires
further changes to the local APIC.
7) FRED stores the vector number and meta information on stack which
allows having more than one NMI vector in future hardware when the
required local APIC changes are in place.
The series implements the initial FRED support by:
- Reworking the existing entry and IDT handling infrastructure to
accomodate for the alternative entry mechanism.
- Expanding the stack frame to accomodate for the extra 16 bytes FRED
requires to store context and meta information
- Providing FRED specific C entry points for events which have
information pushed to the extended stack frame, e.g. #PF and #DB.
- Providing FRED specific C entry points for #NMI and #MCE
- Implementing the FRED specific ASM entry points and the C code to
demultiplex the events
- Providing detection and initialization mechanisms and the necessary
tweaks in context switching, GS BASE handling etc.
The FRED integration aims for maximum code reuse vs the existing IDT
implementation to the extent possible and the deviation in hot paths
like context switching are handled with alternatives to minimalize the
impact. The low level entry and exit paths are seperate due to the
extended stack frame and the hardware based GS BASE swichting and
therefore have no impact on IDT based systems.
It has been extensively tested on existing systems and on the FRED
simulation and as of now there are no outstanding problems"
* tag 'x86-fred-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
x86/fred: Fix init_task thread stack pointer initialization
MAINTAINERS: Add a maintainer entry for FRED
x86/fred: Fix a build warning with allmodconfig due to 'inline' failing to inline properly
x86/fred: Invoke FRED initialization code to enable FRED
x86/fred: Add FRED initialization functions
x86/syscall: Split IDT syscall setup code into idt_syscall_init()
KVM: VMX: Call fred_entry_from_kvm() for IRQ/NMI handling
x86/entry: Add fred_entry_from_kvm() for VMX to handle IRQ/NMI
x86/entry/calling: Allow PUSH_AND_CLEAR_REGS being used beyond actual entry code
x86/fred: Fixup fault on ERETU by jumping to fred_entrypoint_user
x86/fred: Let ret_from_fork_asm() jmp to asm_fred_exit_user when FRED is enabled
x86/traps: Add sysvec_install() to install a system interrupt handler
x86/fred: FRED entry/exit and dispatch code
x86/fred: Add a machine check entry stub for FRED
x86/fred: Add a NMI entry stub for FRED
x86/fred: Add a debug fault entry stub for FRED
x86/idtentry: Incorporate definitions/declarations of the FRED entries
x86/fred: Make exc_page_fault() work for FRED
x86/fred: Allow single-step trap and NMI when starting a new task
x86/fred: No ESPFIX needed when FRED is enabled
...
|
||
|
Linus Torvalds
|
ca7e917769 |
Merge tag 'x86-apic-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC updates from Thomas Gleixner:
"Rework of APIC enumeration and topology evaluation.
The current implementation has a couple of shortcomings:
- It fails to handle hybrid systems correctly.
- The APIC registration code which handles CPU number assignents is
in the middle of the APIC code and detached from the topology
evaluation.
- The various mechanisms which enumerate APICs, ACPI, MPPARSE and
guest specific ones, tweak global variables as they see fit or in
case of XENPV just hack around the generic mechanisms completely.
- The CPUID topology evaluation code is sprinkled all over the vendor
code and reevaluates global variables on every hotplug operation.
- There is no way to analyze topology on the boot CPU before bringing
up the APs. This causes problems for infrastructure like PERF which
needs to size certain aspects upfront or could be simplified if
that would be possible.
- The APIC admission and CPU number association logic is
incomprehensible and overly complex and needs to be kept around
after boot instead of completing this right after the APIC
enumeration.
This update addresses these shortcomings with the following changes:
- Rework the CPUID evaluation code so it is common for all vendors
and provides information about the APIC ID segments in a uniform
way independent of the number of segments (Thread, Core, Module,
..., Die, Package) so that this information can be computed instead
of rewriting global variables of dubious value over and over.
- A few cleanups and simplifcations of the APIC, IO/APIC and related
interfaces to prepare for the topology evaluation changes.
- Seperation of the parser stages so the early evaluation which tries
to find the APIC address can be seperately overridden from the late
evaluation which enumerates and registers the local APIC as further
preparation for sanitizing the topology evaluation.
- A new registration and admission logic which
- encapsulates the inner workings so that parsers and guest logic
cannot longer fiddle in it
- uses the APIC ID segments to build topology bitmaps at
registration time
- provides a sane admission logic
- allows to detect the crash kernel case, where CPU0 does not run
on the real BSP, automatically. This is required to prevent
sending INIT/SIPI sequences to the real BSP which would reset
the whole machine. This was so far handled by a tedious command
line parameter, which does not even work in nested crash
scenarios.
- Associates CPU number after the enumeration completed and
prevents the late registration of APICs, which was somehow
tolerated before.
- Converting all parsers and guest enumeration mechanisms over to the
new interfaces.
This allows to get rid of all global variable tweaking from the
parsers and enumeration mechanisms and sanitizes the XEN[PV]
handling so it can use CPUID evaluation for the first time.
- Mopping up existing sins by taking the information from the APIC ID
segment bitmaps.
This evaluates hybrid systems correctly on the boot CPU and allows
for cleanups and fixes in the related drivers, e.g. PERF.
The series has been extensively tested and the minimal late fallout
due to a broken ACPI/MADT table has been addressed by tightening the
admission logic further"
* tag 'x86-apic-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (76 commits)
x86/topology: Ignore non-present APIC IDs in a present package
x86/apic: Build the x86 topology enumeration functions on UP APIC builds too
smp: Provide 'setup_max_cpus' definition on UP too
smp: Avoid 'setup_max_cpus' namespace collision/shadowing
x86/bugs: Use fixed addressing for VERW operand
x86/cpu/topology: Get rid of cpuinfo::x86_max_cores
x86/cpu/topology: Provide __num_[cores|threads]_per_package
x86/cpu/topology: Rename topology_max_die_per_package()
x86/cpu/topology: Rename smp_num_siblings
x86/cpu/topology: Retrieve cores per package from topology bitmaps
x86/cpu/topology: Use topology logical mapping mechanism
x86/cpu/topology: Provide logical pkg/die mapping
x86/cpu/topology: Simplify cpu_mark_primary_thread()
x86/cpu/topology: Mop up primary thread mask handling
x86/cpu/topology: Use topology bitmaps for sizing
x86/cpu/topology: Let XEN/PV use topology from CPUID/MADT
x86/xen/smp_pv: Count number of vCPUs early
x86/cpu/topology: Assign hotpluggable CPUIDs during init
x86/cpu/topology: Reject unknown APIC IDs on ACPI hotplug
x86/topology: Add a mechanism to track topology via APIC IDs
...
|
||
|
Jakub Kicinski
|
ba980f8dff |
netlink: specs: support generating code for genl socket priv
The family struct is auto-generated for new families, support
use of the sock_priv_* mechanism added in commit
|
||
|
Linus Torvalds
|
d08c407f71 |
Merge tag 'timers-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A large set of updates and features for timers and timekeeping:
- The hierarchical timer pull model
When timer wheel timers are armed they are placed into the timer
wheel of a CPU which is likely to be busy at the time of expiry.
This is done to avoid wakeups on potentially idle CPUs.
This is wrong in several aspects:
1) The heuristics to select the target CPU are wrong by
definition as the chance to get the prediction right is
close to zero.
2) Due to #1 it is possible that timers are accumulated on
a single target CPU
3) The required computation in the enqueue path is just overhead
for dubious value especially under the consideration that the
vast majority of timer wheel timers are either canceled or
rearmed before they expire.
The timer pull model avoids the above by removing the target
computation on enqueue and queueing timers always on the CPU on
which they get armed.
This is achieved by having separate wheels for CPU pinned timers
and global timers which do not care about where they expire.
As long as a CPU is busy it handles both the pinned and the global
timers which are queued on the CPU local timer wheels.
When a CPU goes idle it evaluates its own timer wheels:
- If the first expiring timer is a pinned timer, then the global
timers can be ignored as the CPU will wake up before they
expire.
- If the first expiring timer is a global timer, then the expiry
time is propagated into the timer pull hierarchy and the CPU
makes sure to wake up for the first pinned timer.
The timer pull hierarchy organizes CPUs in groups of eight at the
lowest level and at the next levels groups of eight groups up to
the point where no further aggregation of groups is required, i.e.
the number of levels is log8(NR_CPUS). The magic number of eight
has been established by experimention, but can be adjusted if
needed.
In each group one busy CPU acts as the migrator. It's only one CPU
to avoid lock contention on remote timer wheels.
The migrator CPU checks in its own timer wheel handling whether
there are other CPUs in the group which have gone idle and have
global timers to expire. If there are global timers to expire, the
migrator locks the remote CPU timer wheel and handles the expiry.
Depending on the group level in the hierarchy this handling can
require to walk the hierarchy downwards to the CPU level.
Special care is taken when the last CPU goes idle. At this point
the CPU is the systemwide migrator at the top of the hierarchy and
it therefore cannot delegate to the hierarchy. It needs to arm its
own timer device to expire either at the first expiring timer in
the hierarchy or at the first CPU local timer, which ever expires
first.
This completely removes the overhead from the enqueue path, which
is e.g. for networking a true hotpath and trades it for a slightly
more complex idle path.
This has been in development for a couple of years and the final
series has been extensively tested by various teams from silicon
vendors and ran through extensive CI.
There have been slight performance improvements observed on network
centric workloads and an Intel team confirmed that this allows them
to power down a die completely on a mult-die socket for the first
time in a mostly idle scenario.
There is only one outstanding ~1.5% regression on a specific
overloaded netperf test which is currently investigated, but the
rest is either positive or neutral performance wise and positive on
the power management side.
- Fixes for the timekeeping interpolation code for cross-timestamps:
cross-timestamps are used for PTP to get snapshots from hardware
timers and interpolated them back to clock MONOTONIC. The changes
address a few corner cases in the interpolation code which got the
math and logic wrong.
- Simplifcation of the clocksource watchdog retry logic to
automatically adjust to handle larger systems correctly instead of
having more incomprehensible command line parameters.
- Treewide consolidation of the VDSO data structures.
- The usual small improvements and cleanups all over the place"
* tag 'timers-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
timer/migration: Fix quick check reporting late expiry
tick/sched: Fix build failure for CONFIG_NO_HZ_COMMON=n
vdso/datapage: Quick fix - use asm/page-def.h for ARM64
timers: Assert no next dyntick timer look-up while CPU is offline
tick: Assume timekeeping is correctly handed over upon last offline idle call
tick: Shut down low-res tick from dying CPU
tick: Split nohz and highres features from nohz_mode
tick: Move individual bit features to debuggable mask accesses
tick: Move got_idle_tick away from common flags
tick: Assume the tick can't be stopped in NOHZ_MODE_INACTIVE mode
tick: Move broadcast cancellation up to CPUHP_AP_TICK_DYING
tick: Move tick cancellation up to CPUHP_AP_TICK_DYING
tick: Start centralizing tick related CPU hotplug operations
tick/sched: Don't clear ts::next_tick again in can_stop_idle_tick()
tick/sched: Rename tick_nohz_stop_sched_tick() to tick_nohz_full_stop_tick()
tick: Use IS_ENABLED() whenever possible
tick/sched: Remove useless oneshot ifdeffery
tick/nohz: Remove duplicate between lowres and highres handlers
tick/nohz: Remove duplicate between tick_nohz_switch_to_nohz() and tick_setup_sched_timer()
hrtimer: Select housekeeping CPU during migration
...
|
||
|
Matthew Wood
|
2b39535859 |
net: netconsole: Add continuation line prefix to userdata messages
Add a space (' ') prefix to every userdata line to match docs for
dev-kmsg. To account for this extra character in each userdata entry,
reduce userdata entry names (directory name) from 54 characters to 53.
According to the dev-kmsg docs, a space is used for subsequent lines to
mark them as continuation lines.
> A line starting with ' ', is a continuation line, adding
> key/value pairs to the log message, which provide the machine
> readable context of the message, for reliable processing in
> userspace.
Testing for this patch::
cd /sys/kernel/config/netconsole && mkdir cmdline0
cd cmdline0
mkdir userdata/test && echo "hello" > userdata/test/value
mkdir userdata/test2 && echo "hello2" > userdata/test2/value
echo "message" > /dev/kmsg
Outputs::
6.8.0-rc5-virtme,12,493,231373579,-;message
test=hello
test2=hello2
And I confirmed all testing works as expected from the original patchset
Fixes:
|
||
|
Linus Torvalds
|
02d4df78c5 |
Merge tag 'irq-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Core:
- Make affinity changes take effect immediately for interrupt
threads. This reduces the impact on isolated CPUs as it pulls over
the thread right away instead of doing it after the next hardware
interrupt arrived.
- Cleanup and improvements for the interrupt chip simulator
- Deduplication of the interrupt descriptor initialization code so
the sparse and non-sparse mode share more code.
Drivers:
- A set of conversions to platform_drivers::remove_new() which gets
rid of the pointless return value.
- A new driver for the Starfive JH8100 SoC
- Support for Amlogic-T7 SoCs
- Improvement for the interrupt handling and EOI management for the
loongson interrupt controller.
- The usual fixes and improvements all over the place"
* tag 'irq-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
irqchip/ts4800: Convert to platform_driver::remove_new() callback
irqchip/stm32-exti: Convert to platform_driver::remove_new() callback
irqchip/renesas-rza1: Convert to platform_driver::remove_new() callback
irqchip/renesas-irqc: Convert to platform_driver::remove_new() callback
irqchip/renesas-intc-irqpin: Convert to platform_driver::remove_new() callback
irqchip/pruss-intc: Convert to platform_driver::remove_new() callback
irqchip/mvebu-pic: Convert to platform_driver::remove_new() callback
irqchip/madera: Convert to platform_driver::remove_new() callback
irqchip/ls-scfg-msi: Convert to platform_driver::remove_new() callback
irqchip/keystone: Convert to platform_driver::remove_new() callback
irqchip/imx-irqsteer: Convert to platform_driver::remove_new() callback
irqchip/imx-intmux: Convert to platform_driver::remove_new() callback
irqchip/imgpdc: Convert to platform_driver::remove_new() callback
irqchip: Add StarFive external interrupt controller
dt-bindings: interrupt-controller: Add starfive,jh8100-intc
arm64: dts: Add gpio_intc node for Amlogic-T7 SoCs
irqchip/meson-gpio: Add support for Amlogic-T7 SoCs
dt-bindings: interrupt-controller: Add support for Amlogic-T7 SoCs
irqchip/vic: Fix a kernel-doc warning
genirq: Wake interrupt threads immediately when changing affinity
...
|
||
|
William Tu
|
8f4cd89bf1 |
devlink: Fix length of eswitch inline-mode
Set eswitch inline-mode to be u8, not u16. Otherwise, errors below
$ devlink dev eswitch set pci/0000:08:00.0 mode switchdev \
inline-mode network
Error: Attribute failed policy validation.
kernel answers: Numerical result out of rang
netlink: 'devlink': attribute type 26 has an invalid length.
Fixes:
|
||
|
Pawan Gupta
|
8076fcde01 |
x86/rfds: Mitigate Register File Data Sampling (RFDS)
RFDS is a CPU vulnerability that may allow userspace to infer kernel stale data previously used in floating point registers, vector registers and integer registers. RFDS only affects certain Intel Atom processors. Intel released a microcode update that uses VERW instruction to clear the affected CPU buffers. Unlike MDS, none of the affected cores support SMT. Add RFDS bug infrastructure and enable the VERW based mitigation by default, that clears the affected buffers just before exiting to userspace. Also add sysfs reporting and cmdline parameter "reg_file_data_sampling" to control the mitigation. For details see: Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> |
||
|
Pawan Gupta
|
4e42765d1b |
Documentation/hw-vuln: Add documentation for RFDS
Add the documentation for transient execution vulnerability Register File Data Sampling (RFDS) that affects Intel Atom CPUs. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> |
||
|
Linus Torvalds
|
045395d86a |
Merge tag 'cgroup-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo: "A quiet cycle. One trivial doc update patch. Two patches to drop the now defunct memory_spread_slab feature from cgroup1 cpuset" * tag 'cgroup-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup/cpuset: Mark memory_spread_slab as obsolete cgroup/cpuset: Remove cpuset_do_slab_mem_spread() docs: cgroup-v1: add missing code-block tags |
||
|
Hangbin Liu
|
44208f5936 |
netlink: specs: support unterminated-ok
ynl-gen-c.py supports check unterminated-ok, but the yaml schemas don't have this key. Add this to the yaml files. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20240308081239.3281710-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Hangbin Liu
|
8d0c314c30 |
tools: ynl-gen: support using pre-defined values in attr checks
Support using pre-defined values in checks so we don't need to use hard
code number for the string, binary length. e.g. we have a definition like
#define TEAM_STRING_MAX_LEN 32
Which defined in yaml like:
definitions:
-
name: string-max-len
type: const
value: 32
It can be used in the attribute-sets like
attribute-sets:
-
name: attr-option
name-prefix: team-attr-option-
attributes:
-
name: name
type: string
checks:
len: string-max-len
With this patch it will be converted to
[TEAM_ATTR_OPTION_NAME] = { .type = NLA_STRING, .len = TEAM_STRING_MAX_LEN, }
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240311140727.109562-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Linus Torvalds
|
ff887eb07c |
Merge tag 'wq-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue updates from Tejun Heo:
"This cycle, a lot of workqueue changes including some that are
significant and invasive.
- During v6.6 cycle, unbound workqueues were updated so that they are
more topology aware and flexible, which among other things improved
workqueue behavior on modern multi-L3 CPUs. In the process, commit
|
||
|
Linus Torvalds
|
8ede842f66 |
Merge tag 'rust-6.9' of https://github.com/Rust-for-Linux/linux
Pull Rust updates from Miguel Ojeda:
"Another routine one in terms of features. We got two version upgrades
this time, but in terms of lines, 'alloc' changes are not very large.
Toolchain and infrastructure:
- Upgrade to Rust 1.76.0
This time around, due to how the kernel and Rust schedules have
aligned, there are two upgrades in fact. These allow us to remove
two more unstable features ('const_maybe_uninit_zeroed' and
'ptr_metadata') from the list, among other improvements
- Mark 'rustc' (and others) invocations as recursive, which fixes a
new warning and prepares us for the future in case we eventually
take advantage of the Make jobserver
'kernel' crate:
- Add the 'container_of!' macro
- Stop using the unstable 'ptr_metadata' feature by employing the now
stable 'byte_sub' method to implement 'Arc::from_raw()'
- Add the 'time' module with a 'msecs_to_jiffies()' conversion
function to begin with, to be used by Rust Binder
- Add 'notify_sync()' and 'wait_interruptible_timeout()' methods to
'CondVar', to be used by Rust Binder
- Update integer types for 'CondVar'
- Rename 'wait_list' field to 'wait_queue_head' in 'CondVar'
- Implement 'Display' and 'Debug' for 'BStr'
- Add the 'try_from_foreign()' method to the 'ForeignOwnable' trait
- Add reexports for macros so that they can be used from the right
module (in addition to the root)
- A series of code documentation improvements, including adding
intra-doc links, consistency improvements, typo fixes...
'macros' crate:
- Place generated 'init_module()' function in '.init.text'
Documentation:
- Add documentation on Rust doctests and how they work"
* tag 'rust-6.9' of https://github.com/Rust-for-Linux/linux: (29 commits)
rust: upgrade to Rust 1.76.0
kbuild: mark `rustc` (and others) invocations as recursive
rust: add `container_of!` macro
rust: str: implement `Display` and `Debug` for `BStr`
rust: module: place generated init_module() function in .init.text
rust: types: add `try_from_foreign()` method
docs: rust: Add description of Rust documentation test as KUnit ones
docs: rust: Move testing to a separate page
rust: kernel: stop using ptr_metadata feature
rust: kernel: add reexports for macros
rust: locked_by: shorten doclink preview
rust: kernel: remove unneeded doclink targets
rust: kernel: add doclinks
rust: kernel: add blank lines in front of code blocks
rust: kernel: mark code fragments in docs with backticks
rust: kernel: unify spelling of refcount in docs
rust: str: move SAFETY comment in front of unsafe block
rust: str: use `NUL` instead of 0 in doc comments
rust: kernel: add srctree-relative doclinks
rust: ioctl: end top-level module docs with full stop
...
|
||
|
Linus Torvalds
|
e5a3878c94 |
Merge tag 'rcu.next.v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/boqun/linux
Pull RCU updates from Boqun Feng:
- Eliminate deadlocks involving do_exit() and RCU tasks, by Paul:
Instead of SRCU read side critical sections, now a percpu list is
used in do_exit() for scaning yet-to-exit tasks
- Fix a deadlock due to the dependency between workqueue and RCU
expedited grace period, reported by Anna-Maria Behnsen and Thomas
Gleixner and fixed by Frederic: Now RCU expedited always uses its own
kthread worker instead of a workqueue
- RCU NOCB updates, code cleanups, unnecessary barrier removals and
minor bug fixes
- Maintain real-time response in rcu_tasks_postscan() and a minor fix
for tasks trace quiescence check
- Misc updates, comments and readibility improvement, boot time
parameter for lazy RCU and rcutorture improvement
- Documentation updates
* tag 'rcu.next.v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/boqun/linux: (34 commits)
rcu-tasks: Maintain real-time response in rcu_tasks_postscan()
rcu-tasks: Eliminate deadlocks involving do_exit() and RCU tasks
rcu-tasks: Maintain lists to eliminate RCU-tasks/do_exit() deadlocks
rcu-tasks: Initialize data to eliminate RCU-tasks/do_exit() deadlocks
rcu-tasks: Initialize callback lists at rcu_init() time
rcu-tasks: Add data to eliminate RCU-tasks/do_exit() deadlocks
rcu-tasks: Repair RCU Tasks Trace quiescence check
rcu/sync: remove un-used rcu_sync_enter_start function
rcutorture: Suppress rtort_pipe_count warnings until after stalls
srcu: Improve comments about acceleration leak
rcu: Provide a boot time parameter to control lazy RCU
rcu: Rename jiffies_till_flush to jiffies_lazy_flush
doc: Update checklist.rst discussion of callback execution
doc: Clarify use of slab constructors and SLAB_TYPESAFE_BY_RCU
context_tracking: Fix kerneldoc headers for __ct_user_{enter,exit}()
doc: Add EARLY flag to early-parsed kernel boot parameters
doc: Add CONFIG_RCU_STRICT_GRACE_PERIOD to checklist.rst
doc: Make checklist.rst note that spinlocks are implied RCU readers
doc: Make whatisRCU.rst note that spinlocks are RCU readers
doc: Spinlocks are implied RCU readers
...
|
||
|
Linus Torvalds
|
0f1a876682 |
Merge tag 'vfs-6.9.uuid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs uuid updates from Christian Brauner: "This adds two new ioctl()s for getting the filesystem uuid and retrieving the sysfs path based on the path of a mounted filesystem. Getting the filesystem uuid has been implemented in filesystem specific code for a while it's now lifted as a generic ioctl" * tag 'vfs-6.9.uuid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: xfs: add support for FS_IOC_GETFSSYSFSPATH fs: add FS_IOC_GETFSSYSFSPATH fat: Hook up sb->s_uuid fs: FS_IOC_GETUUID ovl: convert to super_set_uuid() fs: super_set_uuid() |
||
|
Linus Torvalds
|
77417942e4 |
Merge tag 'vfs-6.9.ntfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull ntfs update from Christian Brauner:
"This removes the old ntfs driver. The new ntfs3 driver is a full
replacement that was merged over two years ago. We've went through
various userspace and either they use ntfs3 or they use the fuse
version of ntfs and thus build neither ntfs nor ntfs3. I think that's
a clear sign that we should risk removing the legacy ntfs driver.
Quoting from Arch Linux and Debian:
- Debian does neither build the legacy ntfs nor the new ntfs3:
"Not currently built with Debian's kernel packages, 'ntfs' has been
symlinked to 'ntfs-3g' as it relates to fstab and mount commands.
Debian kernels are built without support of the ntfs3 driver
developed by Paragon Software." (cf. [2])
- Archlinux provides ntfs3 as their default since 5.15:
"All officially supported kernels with versions 5.15 or newer are
built with CONFIG_NTFS3_FS=m and thus support it. Before 5.15,
NTFS read and write support is provided by the NTFS-3G FUSE file
system." (cf. [1]).
It's unmaintained apart from various odd fixes as well. Worst case we
have to reintroduce it if someone really has a valid dependency on it.
But it's worth trying to see whether we can remove it"
Link: https://wiki.archlinux.org/title/NTFS [1]
Link: https://wiki.debian.org/NTFS [2]
* tag 'vfs-6.9.ntfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: remove NTFS classic from docum. index
fs: Remove NTFS classic
|
||
|
Linus Torvalds
|
7ea65c89d8 |
Merge tag 'vfs-6.9.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Misc features, cleanups, and fixes for vfs and individual filesystems.
Features:
- Support idmapped mounts for hugetlbfs.
- Add RWF_NOAPPEND flag for pwritev2(). This allows us to fix a bug
where the passed offset is ignored if the file is O_APPEND. The new
flag allows a caller to enforce that the offset is honored to
conform to posix even if the file was opened in append mode.
- Move i_mmap_rwsem in struct address_space to avoid false sharing
between i_mmap and i_mmap_rwsem.
- Convert efs, qnx4, and coda to use the new mount api.
- Add a generic is_dot_dotdot() helper that's used by various
filesystems and the VFS code instead of open-coding it multiple
times.
- Recently we've added stable offsets which allows stable ordering
when iterating directories exported through NFS on e.g., tmpfs
filesystems. Originally an xarray was used for the offset map but
that caused slab fragmentation issues over time. This switches the
offset map to the maple tree which has a dense mode that handles
this scenario a lot better. Includes tests.
- Finally merge the case-insensitive improvement series Gabriel has
been working on for a long time. This cleanly propagates case
insensitive operations through ->s_d_op which in turn allows us to
remove the quite ugly generic_set_encrypted_ci_d_ops() operations.
It also improves performance by trying a case-sensitive comparison
first and then fallback to case-insensitive lookup if that fails.
This also fixes a bug where overlayfs would be able to be mounted
over a case insensitive directory which would lead to all sort of
odd behaviors.
Cleanups:
- Make file_dentry() a simple accessor now that ->d_real() is
simplified because of the backing file work we did the last two
cycles.
- Use the dedicated file_mnt_idmap helper in ntfs3.
- Use smp_load_acquire/store_release() in the i_size_read/write
helpers and thus remove the hack to handle i_size reads in the
filemap code.
- The SLAB_MEM_SPREAD is a nop now. Remove it from various places in
fs/
- It's no longer necessary to perform a second built-in initramfs
unpack call because we retain the contents of the previous
extraction. Remove it.
- Now that we have removed various allocators kfree_rcu() always
works with kmem caches and kmalloc(). So simplify various places
that only use an rcu callback in order to handle the kmem cache
case.
- Convert the pipe code to use a lockdep comparison function instead
of open-coding the nesting making lockdep validation easier.
- Move code into fs-writeback.c that was located in a header but can
be made static as it's only used in that one file.
- Rewrite the alignment checking iterators for iovec and bvec to be
easier to read, and also significantly more compact in terms of
generated code. This saves 270 bytes of text on x86-64 (with
clang-18) and 224 bytes on arm64 (with gcc-13). In profiles it also
saves a bit of time for the same workload.
- Switch various places to use KMEM_CACHE instead of
kmem_cache_create().
- Use inode_set_ctime_to_ts() in inode_set_ctime_current()
- Use kzalloc() in name_to_handle_at() to avoid kernel infoleak.
- Various smaller cleanups for eventfds.
Fixes:
- Fix various comments and typos, and unneeded initializations.
- Fix stack allocation hack for clang in the select code.
- Improve dump_mapping() debug code on a best-effort basis.
- Fix build errors in various selftests.
- Avoid wrap-around instrumentation in various places.
- Don't allow user namespaces without an idmapping to be used for
idmapped mounts.
- Fix sysv sb_read() call.
- Fix fallback implementation of the get_name() export operation"
* tag 'vfs-6.9.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (70 commits)
hugetlbfs: support idmapped mounts
qnx4: convert qnx4 to use the new mount api
fs: use inode_set_ctime_to_ts to set inode ctime to current time
libfs: Drop generic_set_encrypted_ci_d_ops
ubifs: Configure dentry operations at dentry-creation time
f2fs: Configure dentry operations at dentry-creation time
ext4: Configure dentry operations at dentry-creation time
libfs: Add helper to choose dentry operations at mount-time
libfs: Merge encrypted_ci_dentry_ops and ci_dentry_ops
fscrypt: Drop d_revalidate once the key is added
fscrypt: Drop d_revalidate for valid dentries during lookup
fscrypt: Factor out a helper to configure the lookup dentry
ovl: Always reject mounting over case-insensitive directories
libfs: Attempt exact-match comparison first during casefolded lookup
efs: remove SLAB_MEM_SPREAD flag usage
jfs: remove SLAB_MEM_SPREAD flag usage
minix: remove SLAB_MEM_SPREAD flag usage
openpromfs: remove SLAB_MEM_SPREAD flag usage
proc: remove SLAB_MEM_SPREAD flag usage
qnx6: remove SLAB_MEM_SPREAD flag usage
...
|
||
|
Linus Torvalds
|
d451b075f7 |
Merge tag 'linux_kselftest-next-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan: - livepatch restructuring to move the module out of lib to be built as a out-of-tree modules during kselftest build. This makes it easier change, debug and rebuild the tests by running make on the selftests/livepatch directory, which is not currently possible since the modules on lib/livepatch are build and installed using the main makefile modules target. - livepatch restructuring fixes for problems found by kernel test robot. The change skips the test if kernel-devel isn't installed (default value of KDIR), or if KDIR variable passed doesn't exists. - resctrl test restructuring and new non-contiguous CBMs CAT test - new ktap_helpers to print diagnostic messages, pass/fail tests based on exit code, abort test, and finish the test. - a new test verify power supply properties. - a new ftrace to exercise function tracer across cpu hotplug. - timeout increase for mqueue test to allow the test to run on i3.metal AWS instances. - minor spelling corrections in several tests. - missing gitignore files and changes to existing gitignore files. * tag 'linux_kselftest-next-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (57 commits) kselftest: Add basic test for probing the rust sample modules selftests: lib.mk: Do not process TEST_GEN_MODS_DIR selftests: livepatch: Avoid running the tests if kernel-devel is missing selftests: livepatch: Add initial .gitignore selftests/resctrl: Add non-contiguous CBMs CAT test selftests/resctrl: Add resource_info_file_exists() selftests/resctrl: Split validate_resctrl_feature_request() selftests/resctrl: Add a helper for the non-contiguous test selftests/resctrl: Add test groups and name L3 CAT test L3_CAT selftests: sched: Fix spelling mistake "hiearchy" -> "hierarchy" selftests/mqueue: Set timeout to 180 seconds selftests/ftrace: Add test to exercize function tracer across cpu hotplug selftest: ftrace: fix minor typo in log selftests: thermal: intel: workload_hint: add missing gitignore selftests: thermal: intel: power_floor: add missing gitignore selftests: uevent: add missing gitignore selftests: Add test to verify power supply properties selftests: ktap_helpers: Add a helper to finish the test selftests: ktap_helpers: Add a helper to abort the test selftests: ktap_helpers: Add helper to pass/fail test based on exit code ... |
||
|
David S. Miller
|
f541fd7adf |
Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says: ==================== ethtool: ice: Support for RSS settings to GTP Takeru Hayasaka enables RSS functionality for GTP packets on ice driver with ethtool. A user can include TEID and make RSS work for GTP-U over IPv4 by doing the following:`ethtool -N ens3 rx-flow-hash gtpu4 sde` In addition to gtpu(4|6), we now support gtpc(4|6),gtpc(4|6)t,gtpu(4|6)e, gtpu(4|6)u, and gtpu(4|6)d. gtpc(4|6): Used for GTP-C in IPv4 and IPv6, where the GTP header format does not include a TEID. gtpc(4|6)t: Used for GTP-C in IPv4 and IPv6, with a GTP header format that includes a TEID. gtpu(4|6): Used for GTP-U in both IPv4 and IPv6 scenarios. gtpu(4|6)e: Used for GTP-U with extended headers in both IPv4 and IPv6. gtpu(4|6)u: Used when the PSC (PDU session container) in the GTP-U extended header includes Uplink, applicable to both IPv4 and IPv6. gtpu(4|6)d: Used when the PSC in the GTP-U extended header includes Downlink, for both IPv4 and IPv6. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Linus Torvalds
|
137e0ec05a |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"KVM GUEST_MEMFD fixes for 6.8:
- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY
to avoid creating an inconsistent ABI (KVM_MEM_GUEST_MEMFD is not
writable from userspace, so there would be no way to write to a
read-only guest_memfd).
- Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
clear that such VMs are purely for development and testing.
- Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term
plan is to support confidential VMs with deterministic private
memory (SNP and TDX) only in the TDP MMU.
- Fix a bug in a GUEST_MEMFD dirty logging test that caused false
passes.
x86 fixes:
- Fix missing marking of a guest page as dirty when emulating an
atomic access.
- Check for mmu_notifier invalidation events before faulting in the
pfn, and before acquiring mmu_lock, to avoid unnecessary work and
lock contention with preemptible kernels (including
CONFIG_PREEMPT_DYNAMIC in non-preemptible mode).
- Disable AMD DebugSwap by default, it breaks VMSA signing and will
be re-enabled with a better VM creation API in 6.10.
- Do the cache flush of converted pages in svm_register_enc_region()
before dropping kvm->lock, to avoid a race with unregistering of
the same region and the consequent use-after-free issue"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
SEV: disable SEV-ES DebugSwap by default
KVM: x86/mmu: Retry fault before acquiring mmu_lock if mapping is changing
KVM: SVM: Flush pages under kvm->lock to fix UAF in svm_register_enc_region()
KVM: selftests: Add a testcase to verify GUEST_MEMFD and READONLY are exclusive
KVM: selftests: Create GUEST_MEMFD for relevant invalid flags testcases
KVM: x86/mmu: Restrict KVM_SW_PROTECTED_VM to the TDP MMU
KVM: x86: Update KVM_SW_PROTECTED_VM docs to make it clear they're a WIP
KVM: Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY
KVM: x86: Mark target gfn of emulated atomic instruction as dirty
|
||
|
Jakub Kicinski
|
d7e14e5344 |
Merge tag 'mlx5-socket-direct-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says: ==================== Support Multi-PF netdev (Socket Direct) This series adds support for combining multiple devices (PFs) of the same port under one netdev instance. Passing traffic through different devices belonging to different NUMA sockets saves cross-numa traffic and allows apps running on the same netdev from different numas to still feel a sense of proximity to the device and achieve improved performance. We achieve this by grouping PFs together, and creating the netdev only once all group members are probed. Symmetrically, we destroy the netdev once any of the PFs is removed. The channels are distributed between all devices, a proper configuration would utilize the correct close numa when working on a certain app/cpu. We pick one device to be a primary (leader), and it fills a special role. The other devices (secondaries) are disconnected from the network in the chip level (set to silent mode). All RX/TX traffic is steered through the primary to/from the secondaries. Currently, we limit the support to PFs only, and up to two devices (sockets). * tag 'mlx5-socket-direct-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: Documentation: networking: Add description for multi-pf netdev net/mlx5: Enable SD feature net/mlx5e: Block TLS device offload on combined SD netdev net/mlx5e: Support per-mdev queue counter net/mlx5e: Support cross-vhca RSS net/mlx5e: Let channels be SD-aware net/mlx5e: Create EN core HW resources for all secondary devices net/mlx5e: Create single netdev per SD group net/mlx5: SD, Add debugfs net/mlx5: SD, Add informative prints in kernel log net/mlx5: SD, Implement steering for primary and secondaries net/mlx5: SD, Implement devcom communication and primary election net/mlx5: SD, Implement basic query and instantiation net/mlx5: SD, Introduce SD lib net/mlx5: Add MPIR bit in mcam_access_reg ==================== Link: https://lore.kernel.org/r/20240307084229.500776-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
6dfeb04c46 |
Merge tag 'sound-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai: "A collection of small fixes. Half of them are HD-audio quirks while the rest are various device-specific ASoC fixes" * tag 'sound-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: wm8962: Fix up incorrect error message in wm8962_set_fll ASoC: wm8962: Enable both SPKOUTR_ENA and SPKOUTL_ENA in mono mode ASoC: wm8962: Enable oscillator if selecting WM8962_FLL_OSC ASoC: dt-bindings: nvidia: Fix 'lge' vendor prefix ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook ASoC: amd: yc: Add HP Pavilion Aero Laptop 13-be2xxx(8BD6) into DMI quirk table ASoC: rcar: adg: correct TIMSEL setting for SSI9 ALSA: hda: cs35l41: Overwrite CS35L41 configuration for ASUS UM5302LA ALSA: hda/realtek: Add quirks for Lenovo Thinkbook 16P laptops ALSA: hda: cs35l41: Support Lenovo Thinkbook 16P ALSA: hda/realtek - Add Headset Mic supported Acer NB platform ALSA: hda: optimize the probe codec process ALSA: hda/realtek - Fix headset Mic no show at resume back for Lenovo ALC897 platform ASoC: Intel: bytcr_rt5640: Add an extra entry for the Chuwi Vi8 tablet ASoC: madera: Fix typo in madera_set_fll_clks shift value |
||
|
Jakub Kicinski
|
75c2946db3 |
Merge tag 'wireless-next-2024-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.9
The fourth "new features" pull request for v6.9 with changes both in
stack and in drivers. The theme in this pull request is to fix sparse
warnings but we still have some left in wireless subsystem. Otherwise
quite normal.
Major changes:
rtw89
* NL80211_EXT_FEATURE_SCAN_RANDOM_SN support
* NL80211_EXT_FEATURE_SET_SCAN_DWELL support
rtw88
* support for more rtw8811cu and rtw8821cu devices
mt76
* mt76x2u: add Netgear WNDA3100v3 USB
* mt7915: newer ADIE version support
* mt7925: radio temperature sensor support
* mt7996: remove GCMP IGTK offload
* tag 'wireless-next-2024-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (125 commits)
wifi: rtw89: wow: move release offload packet earlier for WoWLAN mode
wifi: rtw89: wow: set security engine options for 802.11ax chips only
wifi: rtw89: update suspend/resume for different generation
wifi: rtw89: wow: update config mac function with different generation
wifi: rtw89: update DMA function with different generation
wifi: rtw89: wow: update WoWLAN status register for different generation
wifi: rtw89: wow: update WoWLAN reason register for different chips
wifi: brcm80211: handle pmk_op allocation failure
wifi: rtw89: coex: Add coexistence policy to decrease WiFi packet CRC-ERR
wifi: rtw89: coex: When Bluetooth not available don't set power/gain
wifi: rtw89: coex: add return value to ensure H2C command is success or not
wifi: rtw89: coex: Reorder H2C command index to align with firmware
wifi: rtw89: coex: add BTC ctrl_info version 7 and related logic
wifi: rtw89: coex: add init_info H2C command format version 7
wifi: rtw89: 8922a: add coexistence helpers of SW grant
wifi: rtw89: mac: add coexistence helpers {cfg/get}_plt
wifi: cw1200: restore endian swapping
wifi: wlcore: sdio: Rate limit wl12xx_sdio_raw_{read,write}() failures warns
wifi: rtlwifi: Remove rtl_intf_ops.read_efuse_byte
wifi: rtw88: 8821c: Fix false alarm count
...
====================
Link: https://lore.kernel.org/r/20240308100429.B8EA2C433F1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Jakub Kicinski
|
6025b9135f |
net: dqs: add NIC stall detector based on BQL
softnet_data->time_squeeze is sometimes used as a proxy for host overload or indication of scheduling problems. In practice this statistic is very noisy and has hard to grasp units - e.g. is 10 squeezes a second to be expected, or high? Delaying network (NAPI) processing leads to drops on NIC queues but also RTT bloat, impacting pacing and CA decisions. Stalls are a little hard to detect on the Rx side, because there may simply have not been any packets received in given period of time. Packet timestamps help a little bit, but again we don't know if packets are stale because we're not keeping up or because someone (*cough* cgroups) disabled IRQs for a long time. We can, however, use Tx as a proxy for Rx stalls. Most drivers use combined Rx+Tx NAPIs so if Tx gets starved so will Rx. On the Tx side we know exactly when packets get queued, and completed, so there is no uncertainty. This patch adds stall checks to BQL. Why BQL? Because it's a convenient place to add such checks, already called by most drivers, and it has copious free space in its structures (this patch adds no extra cache references or dirtying to the fast path). The algorithm takes one parameter - max delay AKA stall threshold and increments a counter whenever NAPI got delayed for at least that amount of time. It also records the length of the longest stall. To be precise every time NAPI has not polled for at least stall thrs we check if there were any Tx packets queued between last NAPI run and now - stall_thrs/2. Unlike the classic Tx watchdog this mechanism does not ignore stalls caused by Tx being disabled, or loss of link. I don't think the check is worth the complexity, and stall is a stall, whether due to host overload, flow control, link down... doesn't matter much to the application. We have been running this detector in production at Meta for 2 years, with the threshold of 8ms. It's the lowest value where false positives become rare. There's still a constant stream of reported stalls (especially without the ksoftirqd deferral patches reverted), those who like their stall metrics to be 0 may prefer higher value. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Jakub Kicinski
|
92f8b1f5ca |
netdev: add queue stat for alloc failures
Rx alloc failures are commonly counted by drivers. Support reporting those via netdev-genl queue stats. Acked-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20240306195509.1502746-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
ab63a2387c |
netdev: add per-queue statistics
The ethtool-nl family does a good job exposing various protocol related and IEEE/IETF statistics which used to get dumped under ethtool -S, with creative names. Queue stats don't have a netlink API, yet, and remain a lion's share of ethtool -S output for new drivers. Not only is that bad because the names differ driver to driver but it's also bug-prone. Intuitively drivers try to report only the stats for active queues, but querying ethtool stats involves multiple system calls, and the number of stats is read separately from the stats themselves. Worse still when user space asks for values of the stats, it doesn't inform the kernel how big the buffer is. If number of stats increases in the meantime kernel will overflow user buffer. Add a netlink API for dumping queue stats. Queue information is exposed via the netdev-genl family, so add the stats there. Support per-queue and sum-for-device dumps. Latter will be useful when subsequent patches add more interesting common stats than just bytes and packets. The API does not currently distinguish between HW and SW stats. The expectation is that the source of the stats will either not matter much (good packets) or be obvious (skb alloc errors). Acked-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20240306195509.1502746-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jiri Pirko
|
5c497a6482 |
dpll: spec: use proper enum for pin capabilities attribute
The enum is defined, however the pin capabilities attribute does
refer to it. Add this missing enum field.
This fixes ynl cli output:
Example current output:
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml --do pin-get --json '{"id": 0}'
{'capabilities': 4,
...
Example new output:
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml --do pin-get --json '{"id": 0}'
{'capabilities': {'state-can-change'},
...
Fixes:
|
||
|
Donald Hunter
|
768e044a5f |
doc/netlink/specs: Add spec for nlctrl netlink family
Add a spec for the nlctrl family.
Example usage:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/nlctrl.yaml \
--do getfamily --json '{"family-name": "nlctrl"}'
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/nlctrl.yaml \
--dump getpolicy --json '{"family-name": "nlctrl"}'
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240306231046.97158-7-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Donald Hunter
|
bc52b39309 |
doc/netlink: Allow empty enum-name in ynl specs
Update the ynl schemas to allow the specification of empty enum names for all enum code generation. Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240306231046.97158-6-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jérémie Dautheribes
|
b72413211b |
dt-bindings: net: dp83822: change ti,rmii-mode description
Drop reference to the 25MHz clock as it has nothing to do with connecting the PHY and the MAC. Add info about the reference clock direction between the PHY and the MAC as it depends on the selected rmii mode. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jérémie Dautheribes <jeremie.dautheribes@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240305141309.127669-1-jeremie.dautheribes@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
e3afe5dd3a |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: net/core/page_pool_user.c |
||
|
Linus Torvalds
|
df4793505a |
Merge tag 'net-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, ipsec and netfilter.
No solution yet for the stmmac issue mentioned in the last PR, but it
proved to be a lockdep false positive, not a blocker.
Current release - regressions:
- dpll: move all dpll<>netdev helpers to dpll code, fix build
regression with old compilers
Current release - new code bugs:
- page_pool: fix netlink dump stop/resume
Previous releases - regressions:
- bpf: fix verifier to check bpf_func_state->callback_depth when
pruning states as otherwise unsafe programs could get accepted
- ipv6: avoid possible UAF in ip6_route_mpath_notify()
- ice: reconfig host after changing MSI-X on VF
- mlx5:
- e-switch, change flow rule destination checking
- add a memory barrier to prevent a possible null-ptr-deref
- switch to using _bh variant of of spinlock where needed
Previous releases - always broken:
- netfilter: nf_conntrack_h323: add protection for bmp length out of
range
- bpf: fix to zero-initialise xdp_rxq_info struct before running XDP
program in CPU map which led to random xdp_md fields
- xfrm: fix UDP encapsulation in TX packet offload
- netrom: fix data-races around sysctls
- ice:
- fix potential NULL pointer dereference in ice_bridge_setlink()
- fix uninitialized dplls mutex usage
- igc: avoid returning frame twice in XDP_REDIRECT
- i40e: disable NAPI right after disabling irqs when handling
xsk_pool
- geneve: make sure to pull inner header in geneve_rx()
- sparx5: fix use after free inside sparx5_del_mact_entry
- dsa: microchip: fix register write order in ksz8_ind_write8()
Misc:
- selftests: mptcp: fixes for diag.sh"
* tag 'net-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
net: pds_core: Fix possible double free in error handling path
netrom: Fix data-races around sysctl_net_busy_read
netrom: Fix a data-race around sysctl_netrom_link_fails_count
netrom: Fix a data-race around sysctl_netrom_routing_control
netrom: Fix a data-race around sysctl_netrom_transport_no_activity_timeout
netrom: Fix a data-race around sysctl_netrom_transport_requested_window_size
netrom: Fix a data-race around sysctl_netrom_transport_busy_delay
netrom: Fix a data-race around sysctl_netrom_transport_acknowledge_delay
netrom: Fix a data-race around sysctl_netrom_transport_maximum_tries
netrom: Fix a data-race around sysctl_netrom_transport_timeout
netrom: Fix data-races around sysctl_netrom_network_ttl_initialiser
netrom: Fix a data-race around sysctl_netrom_obsolescence_count_initialiser
netrom: Fix a data-race around sysctl_netrom_default_path_quality
netfilter: nf_conntrack_h323: Add protection for bmp length out of range
netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout
netfilter: nft_ct: fix l3num expectations with inet pseudo family
netfilter: nf_tables: reject constant set with timeout
netfilter: nf_tables: disallow anonymous set with timeout flag
net/rds: fix WARNING in rds_conn_connect_if_down
net: dsa: microchip: fix register write order in ksz8_ind_write8()
...
|
||
|
Maxime Chevallier
|
9b1d858839 |
doc: sfp-phylink: update the porting guide with PCS handling
Now that phylink has a comprehensive PCS support, update the porting guide to explain the process of supporting the PCS configuration. This also removed outdated references to phylink_config fields that no longer exists. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Thorsten Leemhuis
|
0c8e9b538e |
docs: verify/bisect: fixes, finetuning, and support for Arch
Assorted changes for the recently added document. Improvements: * Add instructions for installing required software on Arch Linux. Fixes: * Move a 'git remote add -t master stable [...]' from a totally wrong to the right place. * Fix two anchors. * Add two required packages to the openSUSE install instructions. Fine tuning: * Improve the reference section about downloading Linux mainline sources to make it more obvious that those are alternatives. * Include the full instructions for git bundles to ensure the remote gets the right name; that way the text also works stand alone. * Install ncurses and qt headers for use of menuconfig and xconfig by default, but tell users that they are free to omit them. * Mention ahead of time which version number are meant as example in commands used during the step-by-step guide. * Mention that 'kernel-install remove' might do a incomplete job. Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Message-ID: <6592c9ef4244faa484b4113f088dbc1beca61015.1709716794.git.linux@leemhuis.info> |