This attempts to make unacked packet handling more robust by detecting
if there are no connections left then restore all buffers of the
respective pool.
Fixes: 5638d9ea9c ("Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnect")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pull s390 fixes from Alexander Gordeev:
- When kernel lockdown is active userspace tools that rely on read
operations only are unnecessarily blocked. Fix that by avoiding ioctl
registration during lockdown
- Invalid NULL pointer accesses succeed due to the lowcore is always
mapped the identity mapping pinned to zero. To fix that never map the
first two pages of physical memory with identity mapping
- Fix invalid SCCB present check in the SCLP interrupt handler
- Update defconfigs
* tag 's390-6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/hypfs: Enable limited access during lockdown
s390/hypfs: Avoid unnecessary ioctl registration in debugfs
s390/mm: Do not map lowcore with identity mapping
s390/sclp: Fix SCCB present check
s390/configs: Set HZ=1000
s390/configs: Update defconfigs
Pull xen fixes from Juergen Gross:
"Two small cleanups which are both relevant only when running as a Xen
guest"
* tag 'for-linus-6.17-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
drivers/xen/xenbus: remove quirk for Xen 3.x
compiler: remove __ADDRESSABLE_ASM{_STR,}() again
Pull x86 platform driver fixes from Ilpo Järvinen:
- amd/hsmp:
- Ensure sock->metric_tbl_addr is non-NULL
- Register driver even if hwmon registration fails
- amd/pmc: Drop SMU F/W match for Cezanne
- dell-smbios-wmi: Separate "priority" from WMI device ID
- hp-wmi: mark Victus 16-r1xxx for Victus s fan and thermal profile
support
- intel-uncore-freq: Check write blocked for efficiency latency control
* tag 'platform-drivers-x86-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: hp-wmi: mark Victus 16-r1xxx for victus_s fan and thermal profile support
platform/x86/amd/hsmp: Ensure success even if hwmon registration fails
platform/x86/amd/hsmp: Ensure sock->metric_tbl_addr is non-NULL
platform/x86/intel-uncore-freq: Check write blocked for ELC
platform/x86/amd: pmc: Drop SMU F/W match for Cezanne
platform/x86: dell-smbios-wmi: Stop touching WMI device ID
Pull block fixes from Jens Axboe:
"A set of fixes for block that should go into this tree. A bit larger
than what I usually have at this point in time, a lot of that is the
continued fixing of the lockdep annotation for queue freezing that we
recently added, which has highlighted a number of little issues here
and there. This contains:
- MD pull request via Yu:
- Add a legacy_async_del_gendisk mode, to prevent a user tools
regression. New user tools releases will not use such a mode,
the old release with a new kernel now will have warning about
deprecated behavior, and we prepare to remove this legacy mode
after about a year later
- The rename in kernel causing user tools build failure, revert
the rename in mdp_superblock_s
- Fix a regression that interrupted resync can be shown as
recover from mdstat or sysfs
- Improve file size detection for loop, particularly for networked
file systems, by using getattr to get the size rather than the
cached inode size.
- Hotplug CPU lock vs queue freeze fix
- Lockdep fix while updating the number of hardware queues
- Fix stacking for PI devices
- Silence bio_check_eod() for the known case of device removal where
the size is truncated to 0 sectors"
* tag 'block-6.17-20250822' of git://git.kernel.dk/linux:
block: avoid cpu_hotplug_lock depedency on freeze_lock
block: decrement block_rq_qos static key in rq_qos_del()
block: skip q->rq_qos check in rq_qos_done_bio()
blk-mq: fix lockdep warning in __blk_mq_update_nr_hw_queues
block: tone down bio_check_eod
loop: use vfs_getattr_nosec for accurate file size
loop: Consolidate size calculation logic into lo_calculate_size()
block: remove newlines from the warnings in blk_validate_integrity_limits
block: handle pi_tuple_size in queue_limits_stack_integrity
selftests: ublk: Use ARRAY_SIZE() macro to improve code
md: fix sync_action incorrect display during resync
md: add helper rdev_needs_recovery()
md: keep recovery_cp in mdp_superblock_s
md: add legacy_async_del_gendisk mode
Pull io_uring fixes from Jens Axboe:
"Just two small fixes - one that fixes inconsistent ->async_data vs
REQ_F_ASYNC_DATA handling in futex, and a followup that just ensures
that if other opcode handlers mess this up, it won't cause any issues"
* tag 'io_uring-6.17-20250822' of git://git.kernel.dk/linux:
io_uring: clear ->async_data as part of normal init
io_uring/futex: ensure io_futex_wait() cleans up properly on failure
Pull SCSI fixes from James Bottomley:
"All fixes in drivers. The largest diffstat in ufs is caused by the doc
update with the next being the qcom null pointer deref fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: ufs-qcom: Fix ESI null pointer dereference
scsi: ufs: core: Rename ufshcd_wait_for_doorbell_clr()
scsi: ufs: core: Fix the return value documentation
scsi: ufs: core: Remove WARN_ON_ONCE() call from ufshcd_uic_cmd_compl()
scsi: ufs: core: Fix IRQ lock inversion for the SCSI host lock
scsi: qla4xxx: Prevent a potential error pointer dereference
scsi: ufs: ufs-pci: Add support for Intel Wildcat Lake
scsi: fnic: Remove a useless struct mempool forward declaration
Pull MMC fixes from Ulf Hansson:
"MMC host:
- sdhci_am654: Disable HS400 for AM62P SR1.0 and SR1.1
- sdhci-of-arasan: Ensure CD logic stabilization before power-up
- sdhci-pci-gli: Mask the replay timer timeout of AER for GL9763e
MEMSTICK:
- Fix deadlock by moving removing flag earlier"
* tag 'mmc-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci_am654: Disable HS400 for AM62P SR1.0 and SR1.1
memstick: Fix deadlock by moving removing flag earlier
mmc: sdhci-of-arasan: Ensure CD logic stabilization before power-up
mmc: sdhci-pci-gli: GL9763e: Mask the replay timer timeout of AER
mmc: sdhci-pci-gli: GL9763e: Rename the gli_set_gl9763e() for consistency
mmc: sdhci-pci-gli: Add a new function to simplify the code
Pull rdma fixes from Jason Gunthorpe:
- syzkaller found a WARN_ON in rxe due to poor lifecycle management of
resources linked to skbs
- Missing error path handling in erdma qp creation
- Initialize the qp number for the GSI QP in erdma
- Mismatching of DIP, SCC and QP numbers in hns
- SRQ bug fixes in bnxt_re
- Memory leak and possibly uninited memory in bnxt_re
- Remove retired irdma maintainer
- Fix kfree() for kvalloc() in ODP
- Fix memory leak in hns
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/hns: Fix dip entries leak on devices newer than hip09
RDMA/core: Free pfn_list with appropriate kvfree call
MAINTAINERS: Remove bouncing irdma maintainer
RDMA/bnxt_re: Fix to initialize the PBL array
RDMA/bnxt_re: Fix a possible memory leak in the driver
RDMA/bnxt_re: Fix to remove workload check in SRQ limit path
RDMA/bnxt_re: Fix to do SRQ armena by default
RDMA/hns: Fix querying wrong SCC context for DIP algorithm
RDMA/erdma: Fix unset QPN of GSI QP
RDMA/erdma: Fix ignored return value of init_kernel_qp
RDMA/rxe: Flush delayed SKBs while releasing RXE resources
Pull sound fixes from Takashi Iwai:
"Only small fixes.
- ASoC Cirrus codec fixes
- A regression fix for the recent TAS2781 codec refactoring
- A fix for user-timer error handling
- Fixes for USB-audio descriptor validators
- Usual HD-audio and ASoC device-specific quirks"
* tag 'sound-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Use correct sub-type for UAC3 feature unit validation
ALSA: timer: fix ida_free call while not allocated
ASoC: cs35l56: Remove SoundWire Clock Divider workaround for CS35L63
ASoC: cs35l56: Handle new algorithms IDs for CS35L63
ASoC: cs35l56: Update Firmware Addresses for CS35L63 for production silicon
ALSA: hda: tas2781: Fix wrong reference of tasdevice_priv
ALSA: hda/realtek: Audio disappears on HP 15-fc000 after warm boot again
ALSA: hda/realtek: Fix headset mic on ASUS Zenbook 14
ASoC: codecs: ES9389: Modify the standby configuration
ALSA: usb-audio: Fix size validation in convert_chmap_v3()
ALSA: hda/tas2781: Add name prefix tas2781 for tas2781's dvc_tlv and amp_vol_tlv
ALSA: hda/realtek: Add support for HP EliteBook x360 830 G6 and EliteBook 830 G6
Pull smb client fix from Steve French:
"Fix for netfs smb3 oops"
* tag '6.17-rc2-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix oops due to uninitialised variable
Pull NFS client fix from Trond Myklebust:
- NFS: Fix a data corrupting race when updating an existing write
* tag 'nfs-for-6.17-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix a race when updating an existing write
Pull misc fixes from Andrew Morton:
"20 hotfixes. 10 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels. 17 of these
fixes are for MM.
As usual, singletons all over the place, apart from a three-patch
series of KHO followup work from Pasha which is actually also a bunch
of singletons"
* tag 'mm-hotfixes-stable-2025-08-21-18-17' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/mremap: fix WARN with uffd that has remap events disabled
mm/damon/sysfs-schemes: put damos dests dir after removing its files
mm/migrate: fix NULL movable_ops if CONFIG_ZSMALLOC=m
mm/damon/core: fix damos_commit_filter not changing allow
mm/memory-failure: fix infinite UCE for VM_PFNMAP pfn
MAINTAINERS: mark MGLRU as maintained
mm: rust: add page.rs to MEMORY MANAGEMENT - RUST
iov_iter: iterate_folioq: fix handling of offset >= folio size
selftests/damon: fix selftests by installing drgn related script
.mailmap: add entry for Easwar Hariharan
selftests/mm: add test for invalid multi VMA operations
mm/mremap: catch invalid multi VMA moves earlier
mm/mremap: allow multi-VMA move when filesystem uses thp_get_unmapped_area
mm/damon/core: fix commit_ops_filters by using correct nth function
tools/testing: add linux/args.h header and fix radix, VMA tests
mm/debug_vm_pgtable: clear page table entries at destroy_args()
squashfs: fix memory leak in squashfs_fill_super
kho: warn if KHO is disabled due to an error
kho: mm: don't allow deferred struct page with KHO
kho: init new_physxa->phys_bits to fix lockdep
Much like arm-smmu in commit 7d835134d4 ("iommu/arm-smmu: Make
instance lookup robust"), virtio-iommu appears to have the same issue
where iommu_device_register() makes the IOMMU instance visible to other
API callers (including itself) straight away, but internally the
instance isn't ready to recognise itself for viommu_probe_device() to
work correctly until after viommu_probe() has returned. This matters a
lot more now that bus_iommu_probe() has the DT/VIOT knowledge to probe
client devices the way that was always intended. Tweak the lookup and
initialisation in much the same way as for arm-smmu, to ensure that what
we register is functional and ready to go.
Cc: stable@vger.kernel.org
Fixes: bcb81ac6ae ("iommu: Get DT/ACPI parsing into the proper probe path")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/308911aaa1f5be32a3a709996c7bd6cf71d30f33.1755190036.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The arm_smmu_attach_commit() updates master->ats_enabled before calling
arm_smmu_remove_master_domain() that is supposed to clean up everything
in the old domain, including the old domain's nr_ats_masters. So, it is
supposed to use the old ats_enabled state of the device, not an updated
state.
This isn't a problem if switching between two domains where:
- old ats_enabled = false; new ats_enabled = false
- old ats_enabled = true; new ats_enabled = true
but can fail cases where:
- old ats_enabled = false; new ats_enabled = true
(old domain should keep the counter but incorrectly decreased it)
- old ats_enabled = true; new ats_enabled = false
(old domain needed to decrease the counter but incorrectly missed it)
Update master->ats_enabled after arm_smmu_remove_master_domain() to fix
this.
Fixes: 7497f4211f ("iommu/arm-smmu-v3: Make changing domains be hitless for ATS")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Link: https://lore.kernel.org/r/20250801030127.2006979-1-nicolinc@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
When building on ARCH=um (which does not set HAS_IOMEM), kconfig
reports an unmet dependency caused by PINCTRL_STMFX. It selects
MFD_STMFX, which depends on HAS_IOMEM. To stop this warning,
PINCTRL_STMFX should also depend on HAS_IOMEM.
kconfig warning:
WARNING: unmet direct dependencies detected for MFD_STMFX
Depends on [n]: HAS_IOMEM [=n] && I2C [=y] && OF [=y]
Selected by [y]:
- PINCTRL_STMFX [=y] && PINCTRL [=y] && I2C [=y] && OF_GPIO [=y]
Fixes: 1490d9f841 ("pinctrl: Add STMFX GPIO expander Pinctrl/GPIO driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/20250815022721.1650885-1-rdunlap@infradead.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When removing a macb device, the driver calls phy_exit() before
unregister_netdev(). This leads to a WARN from kernfs:
------------[ cut here ]------------
kernfs: can not remove 'attached_dev', no directory
WARNING: CPU: 1 PID: 27146 at fs/kernfs/dir.c:1683
Call trace:
kernfs_remove_by_name_ns+0xd8/0xf0
sysfs_remove_link+0x24/0x58
phy_detach+0x5c/0x168
phy_disconnect+0x4c/0x70
phylink_disconnect_phy+0x6c/0xc0 [phylink]
macb_close+0x6c/0x170 [macb]
...
macb_remove+0x60/0x168 [macb]
platform_remove+0x5c/0x80
...
The warning happens because the PHY is being exited while the netdev
is still registered. The correct order is to unregister the netdev
before shutting down the PHY and cleaning up the MDIO bus.
Fix this by moving unregister_netdev() ahead of phy_exit() in
macb_remove().
Fixes: 8b73fa3ae0 ("net: macb: Added ZynqMP-specific initialization")
Signed-off-by: luoguangfei <15388634752@163.com>
Link: https://patch.msgid.link/20250818232527.1316-1-15388634752@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Will Deacon says:
====================
Fix vsock error-handling regression introduced in v6.17-rc1
Here are a couple of patches fixing the vsock error-handling regression
found by syzbot that I introduced during the recent merge window.
====================
Link: https://patch.msgid.link/20250818180355.29275-1-will@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 6693731487 ("vsock/virtio: Allocate nonlinear SKBs for handling
large transmit buffers") converted the virtio vsock transmit path to
utilise nonlinear SKBs when handling large buffers. As part of this
change, virtio_transport_fill_skb() was updated to call
skb_copy_datagram_from_iter() instead of memcpy_from_msg() as the latter
expects a single destination buffer and cannot handle nonlinear SKBs
correctly.
Unfortunately, during this conversion, I overlooked the error case when
the copying function returns -EFAULT due to a fault on the input buffer
in userspace. In this case, memcpy_from_msg() reverts the iterator to
its initial state thanks to copy_from_iter_full() whereas
skb_copy_datagram_from_iter() leaves the iterator partially advanced.
This results in a WARN_ONCE() from the vsock code, which expects the
iterator to stay in sync with the number of bytes transmitted so that
virtio_transport_send_pkt_info() can return -EFAULT when it is called
again:
------------[ cut here ]------------
'send_pkt()' returns 0, but 65536 expected
WARNING: CPU: 0 PID: 5503 at net/vmw_vsock/virtio_transport_common.c:428 virtio_transport_send_pkt_info+0xd11/0xf00 net/vmw_vsock/virtio_transport_common.c:426
Modules linked in:
CPU: 0 UID: 0 PID: 5503 Comm: syz.0.17 Not tainted 6.16.0-syzkaller-12063-g37816488247d #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call virtio_transport_fill_skb_full() to restore the previous iterator
behaviour.
Cc: Jason Wang <jasowang@redhat.com>
Cc: Stefano Garzarella <sgarzare@redhat.com>
Fixes: 6693731487 ("vsock/virtio: Allocate nonlinear SKBs for handling large transmit buffers")
Reported-by: syzbot+b4d960daf7a3c7c2b7b1@syzkaller.appspotmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://patch.msgid.link/20250818180355.29275-3-will@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull cgroup fixes from Tejun Heo:
- Fix NULL de-ref in css_rstat_exit() which could happen after
allocation failure
- Fix a cpuset partition handling bug and a couple other misc issues
- Doc spelling fix
* tag 'cgroup-for-6.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
docs: cgroup: fixed spelling mistakes in documentation
cgroup: avoid null de-ref in css_rstat_exit()
cgroup/cpuset: Remove the unnecessary css_get/put() in cpuset_partition_write()
cgroup/cpuset: Fix a partition error with CPU hotplug
cgroup/cpuset: Use static_branch_enable_cpuslocked() on cpusets_insane_config_key
Pull spi fixes from Mark Brown:
"A small collection of fixes that came in during the past week, a few
driver specifics plus one fix for the spi-mem core where we weren't
taking account of the frequency capabilities of the system when
determining if it can support an operation"
* tag 'spi-fix-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: st: fix PM macros to use CONFIG_PM instead of CONFIG_PM_SLEEP
spi: spi-qpic-snand: fix calculating of ECC OOB regions' properties
spi: spi-fsl-lpspi: Clamp too high speed_hz
spi: spi-mem: add spi_mem_adjust_op_freq() in spi_mem_supports_op()
spi: spi-mem: Add missing kdoc argument
spi: spi-qpic-snand: use correct CW_PER_PAGE value for OOB write
Pull regulator fixes from Mark Brown:
"A couple of fairly minor device specific fixes that came in over the
past week or so, plus the addition of an actual maintainer for the
IR38060"
* tag 'regulator-fix-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: tps65219: regulator: tps65219: Fix error codes in probe()
regulator: pca9450: Use devm_register_sys_off_handler
regulator: dt-bindings: infineon,ir38060: Add Guenter as maintainer from IBM
Pull ACPI fixes from Rafael Wysocki:
"These fix three new issues in the ACPI APEI error injection code and
an ACPI platform firmware runtime update interface issue:
- Make ACPI APEI error injection check the version of the request
when mapping the EINJ parameter structure in the BIOS reserved
memory to prevent injecting errors based on an uninitialized
field (Tony Luck)
- Fix potential NULL dereference in __einj_error_inject() that may
occur when memory allocation fails (Charles Han)
- Remove the __exit annotation from einj_remove(), so it can be
called on errors during faux device probe (Uwe Kleine-König)
- Use a security-version-number check instead of a runtime version
check during ACPI platform firmware runtime driver updates to
prevent those updates from failing due to false-positive driver
version check failures (Chen Yu)"
* tag 'acpi-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: pfr_update: Fix the driver update version check
ACPI: APEI: EINJ: Fix resource leak by remove callback in .exit.text
ACPI: APEI: EINJ: fix potential NULL dereference in __einj_error_inject()
ACPI: APEI: EINJ: Check if user asked for EINJV2 injection
Pull power management fixes from Rafael Wysocki:
"These fix a cpuidle menu governor issue and two issues in the cpupower
utility:
- Prevent the menu cpuidle governor from selecting idle states with
exit latency exceeding the current PM QoS limit after stopping the
scheduler tick (Rafael Wysocki)
- Make the set subcommand's -t option in the cpupower utility work as
documented and allow it to control the CPU boost feature of cpufreq
beyond x86 (Shinji Nomoto)"
* tag 'pm-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: governors: menu: Avoid selecting states with too much latency
cpupower: Allow control of boost feature on non-x86 based systems with boost support.
cpupower: Fix a bug where the -t option of the set subcommand was not working.
Pull sched_ext fixes from Tejun Heo:
- Fix a subtle bug during SCX enabling where a dead task skips init
but doesn't skip sched class switch leading to invalid task state
transition warning
- Cosmetic fix in selftests
* tag 'sched_ext-for-6.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
selftests/sched_ext: Remove duplicate sched.h header
sched/ext: Fix invalid task state transitions on class switch
Opcode handlers like POLL_ADD will use ->async_data as the pointer for
double poll handling, which is a bit different than the usual case
where it's strictly gated by the REQ_F_ASYNC_DATA flag. Be a bit more
proactive in handling ->async_data, and clear it to NULL as part of
regular init. Init is touching that cacheline anyway, so might as well
clear it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The io_futex_data is allocated upfront and assigned to the io_kiocb
async_data field, but the request isn't marked with REQ_F_ASYNC_DATA
at that point. Those two should always go together, as the flag tells
io_uring whether the field is valid or not.
Additionally, on failure cleanup, the futex handler frees the data but
does not clear ->async_data. Clear the data and the flag in the error
path as well.
Thanks to Trend Micro Zero Day Initiative and particularly ReDress for
reporting this.
Cc: stable@vger.kernel.org
Fixes: 194bb58c60 ("io_uring: add support for futex wake and wait")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth.
Current release - fix to a fix:
- usb: asix_devices: fix PHY address mask in MDIO bus initialization
Current release - regressions:
- Bluetooth: fixes for the split between BIS_LINK and PA_LINK
- Revert "net: cadence: macb: sama7g5_emac: Remove USARIO CLKEN
flag", breaks compatibility with some existing device tree blobs
- dsa: b53: fix reserved register access in b53_fdb_dump()
Current release - new code bugs:
- sched: dualpi2: run probability update timer in BH to avoid
deadlock
- eth: libwx: fix the size in RSS hash key population
- pse-pd: pd692x0: improve power budget error paths and handling
Previous releases - regressions:
- tls: fix handling of zero-length records on the rx_list
- hsr: reject HSR frame if skb can't hold tag
- bonding: fix negotiation flapping in 802.3ad passive mode
Previous releases - always broken:
- gso: forbid IPv6 TSO with extensions on devices with only IPV6_CSUM
- sched: make cake_enqueue return NET_XMIT_CN when past buffer_limit,
avoid packet drops with low buffer_limit, remove unnecessary WARN()
- sched: fix backlog accounting after modifying config of a qdisc in
the middle of the hierarchy
- mptcp: improve handling of skb extension allocation failures
- eth: mlx5:
- fixes for the "HW Steering" flow management method
- fixes for QoS and device buffer management"
* tag 'net-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
netfilter: nf_reject: don't leak dst refcount for loopback packets
net/mlx5e: Preserve shared buffer capacity during headroom updates
net/mlx5e: Query FW for buffer ownership
net/mlx5: Restore missing scheduling node cleanup on vport enable failure
net/mlx5: Fix QoS reference leak in vport enable error path
net/mlx5: Destroy vport QoS element when no configuration remains
net/mlx5e: Preserve tc-bw during parent changes
net/mlx5: Remove default QoS group and attach vports directly to root TSAR
net/mlx5: Base ECVF devlink port attrs from 0
net: pse-pd: pd692x0: Skip power budget configuration when undefined
net: pse-pd: pd692x0: Fix power budget leak in manager setup error path
Octeontx2-af: Skip overlap check for SPI field
selftests: tls: add tests for zero-length records
tls: fix handling of zero-length records on the rx_list
net: airoha: ppe: Do not invalid PPE entries in case of SW hash collision
selftests: bonding: add test for passive LACP mode
bonding: send LACPDUs periodically in passive mode after receiving partner's LACPDU
bonding: update LACP activity flag after setting lacp_active
Revert "net: cadence: macb: sama7g5_emac: Remove USARIO CLKEN flag"
ipv6: sr: Fix MAC comparison to be constant-time
...
recent patches to add a WARN() when replacing skb dst entry found an
old bug:
WARNING: include/linux/skbuff.h:1165 skb_dst_check_unset include/linux/skbuff.h:1164 [inline]
WARNING: include/linux/skbuff.h:1165 skb_dst_set include/linux/skbuff.h:1210 [inline]
WARNING: include/linux/skbuff.h:1165 nf_reject_fill_skb_dst+0x2a4/0x330 net/ipv4/netfilter/nf_reject_ipv4.c:234
[..]
Call Trace:
nf_send_unreach+0x17b/0x6e0 net/ipv4/netfilter/nf_reject_ipv4.c:325
nft_reject_inet_eval+0x4bc/0x690 net/netfilter/nft_reject_inet.c:27
expr_call_ops_eval net/netfilter/nf_tables_core.c:237 [inline]
..
This is because blamed commit forgot about loopback packets.
Such packets already have a dst_entry attached, even at PRE_ROUTING stage.
Instead of checking hook just check if the skb already has a route
attached to it.
Fixes: f53b9b0bdc ("netfilter: introduce support for reject at prerouting stage")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20250820123707.10671-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Tx refillq logic will cause packets to be silently dropped if there
are not enough buffer resources available to send a packet in flow
scheduling mode. Instead, determine how many buffers are needed along
with number of descriptors. Make sure there are enough of both resources
to send the packet, and stop the queue if not.
Fixes: 7292af042b ("idpf: fix a race in txq wakeup")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Replace the TxQ buffer ring with one large pool/array of buffers (only
for flow scheduling). This eliminates the tag generation and makes it
impossible for a tag to be associated with more than one packet.
The completion tag passed to HW through the descriptor is the index into
the array. That same completion tag is posted back to the driver in the
completion descriptor, and used to index into the array to quickly
retrieve the buffer during cleaning. In this way, the tags are treated
as a fix sized resource. If all tags are in use, no more packets can be
sent on that particular queue (until some are freed up). The tag pool
size is 64K since the completion tag width is 16 bits.
For each packet, the driver pulls a free tag from the refillq to get the
next free buffer index. When cleaning is complete, the tag is posted
back to the refillq. A multi-frag packet spans multiple buffers in the
driver, therefore it uses multiple buffer indexes/tags from the pool.
Each frag pulls from the refillq to get the next free buffer index.
These are tracked in a next_buf field that replaces the completion tag
field in the buffer struct. This chains the buffers together so that the
packet can be cleaned from the starting completion tag taken from the
completion descriptor, then from the next_buf field for each subsequent
buffer.
In case of a dma_mapping_error occurs or the refillq runs out of free
buf_ids, the packet will execute the rollback error path. This unmaps
any buffers previously mapped for the packet. Since several free
buf_ids could have already been pulled from the refillq, we need to
restore its original state as well. Otherwise, the buf_ids/tags
will be leaked and not used again until the queue is reallocated.
Descriptor completions only advance the descriptor ring index to "clean"
the descriptors. The packet completions only clean the buffers
associated with the given packet completion tag and do not update the
descriptor ring index.
When operating in queue based scheduling mode, the array still acts as a
ring and will only have TxQ descriptor count entries. The tx_bufs are
still associated 1:1 with the descriptor ring entries and we can use the
conventional indexing mechanisms.
Fixes: c2d548cad1 ("idpf: add TX splitq napi poll support")
Signed-off-by: Luigi Rizzo <lrizzo@google.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Move (and rename) the existing rollback logic to singleq.c since that
will be the only consumer. Create a simplified splitq specific rollback
function to loop through and unmap tx_bufs based on the completion tag.
This is critical before replacing the Tx buffer ring with the buffer
pool since the previous rollback indexing will not work to unmap the
chained buffers from the pool.
Cache the next_to_use index before any portion of the packet is put on
the descriptor ring. In case of an error, the rollback will bump tail to
the correct next_to_use value. Because the splitq path now supports
different types of context descriptors (and potentially multiple in the
future), this will take care of rolling back any and all context
descriptors encoded on the ring for the erroneous packet. The previous
rollback logic was broken for PTP packets since it would not account for
the PTP context descriptor.
Fixes: 1a49cf814f ("idpf: add Tx timestamp flows")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Track the gap between next_to_use and the last RE index. Set RE again
if the gap is large enough to ensure RE bit is set frequently. This is
critical before removing the stashing mechanisms because the
opportunistic descriptor ring cleaning from the out-of-order completions
will go away. Previously the descriptors would be "cleaned" by both the
descriptor (RE) completion and the out-of-order completions. Without the
latter, we must ensure the RE bit is set more frequently. Otherwise,
it's theoretically possible for the descriptor ring next_to_clean to
never advance. The previous implementation was dependent on the start
of a packet falling on a 64th index in the descriptor ring, which is not
guaranteed with large packets.
Signed-off-by: Luigi Rizzo <lrizzo@google.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In certain production environments, it is possible for completion tags
to collide, meaning N packets with the same completion tag are in flight
at the same time. In this environment, any given Tx queue is effectively
used to send both slower traffic and higher throughput traffic
simultaneously. This is the result of a customer's specific
configuration in the device pipeline, the details of which Intel cannot
provide. This configuration results in a small number of out-of-order
completions, i.e., a small number of packets in flight. The existing
guardrails in the driver only protect against a large number of packets
in flight. The slower flow completions are delayed which causes the
out-of-order completions. The fast flow will continue sending traffic
and generating tags. Because tags are generated on the fly, the fast
flow eventually uses the same tag for a packet that is still in flight
from the slower flow. The driver has no idea which packet it should
clean when it processes the completion with that tag, but it will look
for the packet on the buffer ring before the hash table. If the slower
flow packet completion is processed first, it will end up cleaning the
fast flow packet on the ring prematurely. This leaves the descriptor
ring in a bad state resulting in a crash or Tx timeout.
In summary, generating a tag when a packet is sent can lead to the same
tag being associated with multiple packets. This can lead to resource
leaks, crashes, and/or Tx timeouts.
Before we can replace the tag generation, we need a new mechanism for
the send path to know what tag to use next. The driver will allocate and
initialize a refillq for each TxQ with all of the possible free tag
values. During send, the driver grabs the next free tag from the refillq
from next_to_clean. While cleaning the packet, the clean routine posts
the tag back to the refillq's next_to_use to indicate that it is now
free to use.
This mechanism works exactly the same way as the existing Rx refill
queues, which post the cleaned buffer IDs back to the buffer queue to be
reposted to HW. Since we're using the refillqs for both Rx and Tx now,
genericize some of the existing refillq support.
Note: the refillqs will not be used yet. This is only demonstrating how
they will be used to pass free tags back to the send path.
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When kernel lockdown is active, debugfs_locked_down() blocks access to
hypfs files that register ioctl callbacks, even if the ioctl interface
is not required for a function. This unnecessarily breaks userspace
tools that only rely on read operations.
Resolve this by registering a minimal set of file operations during
lockdown, avoiding ioctl registration and preserving access for affected
tooling.
Note that this change restores hypfs functionality when lockdown is
active from early boot (e.g. via lockdown=integrity kernel parameter),
but does not apply to scenarios where lockdown is enabled dynamically
while Linux is running.
Tested-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Fixes: 5496197f9b ("debugfs: Restrict debugfs when the kernel is locked down")
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Currently, hypfs registers ioctl callbacks for all debugfs files,
despite only one file requiring them. This leads to unintended exposure
of unused interfaces to user space and can trigger side effects such as
restricted access when kernel lockdown is enabled.
Restrict ioctl registration to only those files that implement ioctl
functionality to avoid interface clutter and unnecessary access
restrictions.
Tested-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Fixes: 5496197f9b ("debugfs: Restrict debugfs when the kernel is locked down")
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The entry of the validators table for UAC3 feature unit is defined
with a wrong sub-type UAC_FEATURE (= 0x06) while it should have been
UAC3_FEATURE (= 0x07). This patch corrects the entry value.
Fixes: 57f8770620 ("ALSA: usb-audio: More validations of descriptor units")
Link: https://patch.msgid.link/20250821150835.8894-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When port buffer headroom changes, port_update_shared_buffer()
recalculates the shared buffer size and splits it in a 3:1 ratio
(lossy:lossless) - Currently, the calculation is:
lossless = shared / 4;
lossy = (shared / 4) * 3;
Meaning, the calculation dropped the remainder of shared % 4 due to
integer division, unintentionally reducing the total shared buffer
by up to three cells on each update. Over time, this could shrink
the buffer below usable size.
Fix it by changing the calculation to:
lossless = shared / 4;
lossy = shared - lossless;
This retains all buffer cells while still approximating the
intended 3:1 split, preventing capacity loss over time.
While at it, perform headroom calculations in units of cells rather than
in bytes for more accurate calculations avoiding extra divisions.
Fixes: a440030d89 ("net/mlx5e: Update shared buffer along with device buffer changes")
Signed-off-by: Armen Ratner <armeng@nvidia.com>
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20250820133209.389065-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
