Pull misc x86 fixes from Ingo Molnar:
- Follow up fixes for the BHI mitigations code
- Fix !SPECULATION_MITIGATIONS bug not turning off mitigations as
expected
- Work around an APIC emulation bug when the kernel is built with Clang
and run as a SEV guest
- Follow up x86 topology fixes
* tag 'x86-urgent-2024-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/amd: Move TOPOEXT enablement into the topology parser
x86/cpu/amd: Make the NODEID_MSR union actually work
x86/cpu/amd: Make the CPUID 0x80000008 parser correct
x86/bugs: Replace CONFIG_SPECTRE_BHI_{ON,OFF} with CONFIG_MITIGATION_SPECTRE_BHI
x86/bugs: Remove CONFIG_BHI_MITIGATION_AUTO and spectre_bhi=auto
x86/bugs: Clarify that syscall hardening isn't a BHI mitigation
x86/bugs: Fix BHI handling of RRSBA
x86/bugs: Rename various 'ia32_cap' variables to 'x86_arch_cap_msr'
x86/bugs: Cache the value of MSR_IA32_ARCH_CAPABILITIES
x86/bugs: Fix BHI documentation
x86/cpu: Actually turn off mitigations by default for SPECULATION_MITIGATIONS=n
x86/topology: Don't update cpu_possible_map in topo_set_cpuids()
x86/bugs: Fix return type of spectre_bhi_state()
x86/apic: Force native_apic_mem_read() to use the MOV instruction
Pull virtio bugfixes from Michael Tsirkin:
"Some small, obvious (in hindsight) bugfixes:
- new ioctl in vhost-vdpa has a wrong # - not too late to fix
- vhost has apparently been lacking an smp_rmb() - due to code
duplication :( The duplication will be fixed in the next merge
cycle, this is a minimal fix
- an error message in vhost talks about guest moving used index -
which of course never happens, guest only ever moves the available
index
- i2c-virtio didn't set the driver owner so it did not get refcounted
correctly"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: correct misleading printing information
vhost-vdpa: change ioctl # for VDPA_GET_VRING_SIZE
virtio: store owner from modules with register_virtio_driver()
vhost: Add smp_rmb() in vhost_enable_notify()
vhost: Add smp_rmb() in vhost_vq_avail_empty()
Pull drm fixes from Dave Airlie:
"Looks like everyone woke up after holidays, this weeks pull has a
bunch of stuff all over, 2 weeks worth of amdgpu is a lot of it, then
i915/xe have a few, a bunch of msm fixes, then some scattered driver
fixes.
I expect things will settle down for rc5.
client:
- Protect connector modes with mode_config mutex
ast:
- Fix soft lockup
host1x:
- Do not setup DMA for virtual addresses
ivpu:
- Fix deadlock in context_xa
- PCI fixes
- Fixes to error handling
nouveau:
- gsp: Fix OOB access
- Fix casting
panfrost:
- Fix error path in MMU code
qxl:
- Revert "drm/qxl: simplify qxl_fence_wait"
vmwgfx:
- Enable DMA for SEV mappings
i915:
- Couple CDCLK programming fixes
- HDCP related fix
- 4 Bigjoiner related fixes
- Fix for a circular locking around GuC on reset+wedged case
xe:
- Fix double display mutex initializations
- Fix u32 -> u64 implicit conversions
- Fix RING_CONTEXT_CONTROL not marked as masked
msm:
- DP refcount leak fix on disconnect
- Add missing newlines to prints in msm_fb and msm_kms
- fix dpu debugfs entry permissions
- Fix the interface table for the catalog of X1E80100
- fix irq message printing
- Bindings fix to add DP node as child of mdss for mdss node
- Minor typo fix in DP driver API which handles port status change
- fix CHRASHDUMP_READ()
- fix HHB (highest bank bit) for a619 to fix UBWC corruption
amdgpu:
- GPU reset fixes
- Fix some confusing logging
- UMSCH fix
- Aborted suspend fix
- DCN 3.5 fixes
- S4 fix
- MES logging fixes
- SMU 14 fixes
- SDMA 4.4.2 fix
- KASAN fix
- SMU 13.0.10 fix
- VCN partition fix
- GFX11 fixes
- DWB fixes
- Plane handling fix
- FAMS fix
- DCN 3.1.6 fix
- VSC SDP fixes
- OLED panel fix
- GFX 11.5 fix
amdkfd:
- GPU reset fixes
- fix ioctl integer overflow"
* tag 'drm-fixes-2024-04-12' of https://gitlab.freedesktop.org/drm/kernel: (65 commits)
amdkfd: use calloc instead of kzalloc to avoid integer overflow
drm/xe: Label RING_CONTEXT_CONTROL as masked
drm/xe/xe_migrate: Cast to output precision before multiplying operands
drm/xe/hwmon: Cast result to output precision on left shift of operand
drm/xe/display: Fix double mutex initialization
drm/amdgpu: differentiate external rev id for gfx 11.5.0
drm/amd/display: Adjust dprefclk by down spread percentage.
drm/amd/display: Set VSC SDP Colorimetry same way for MST and SST
drm/amd/display: Program VSC SDP colorimetry for all DP sinks >= 1.4
drm/amd/display: fix disable otg wa logic in DCN316
drm/amd/display: Do not recursively call manual trigger programming
drm/amd/display: always reset ODM mode in context when adding first plane
drm/amdgpu: fix incorrect number of active RBs for gfx11
drm/amd/display: Return max resolution supported by DWB
amd/amdkfd: sync all devices to wait all processes being evicted
drm/amdgpu: clear set_q_mode_offs when VM changed
drm/amdgpu: Fix VCN allocation in CPX partition
drm/amd/pm: fix the high voltage issue after unload
drm/amd/display: Skip on writeback when it's not applicable
drm/amdgpu: implement IRQ_STATE_ENABLE for SDMA v4.4.2
...
Fixes for v6.9
Display:
- Fixes for PM refcount leak when DP goes to disconnected state and
also when link training fails. This is also one of the issues found
with the pm runtime series
- Add missing newlines to prints in msm_fb and msm_kms
- Change permissions of some dpu debugfs entries which write to const
data from catalog to read-only to avoid protection faults
- Fix the interface table for the catalog of X1E80100. This is an
important fix to bringup DP for X1E80100.
- Logging fix to print the callback symbol in the invalid IRQ message
case rather than printing when its known to be NULL.
- Bindings fix to add DP node as child of mdss for mdss node
- Minor typo fix in DP driver API which handles port status change
GPU:
- fix CHRASHDUMP_READ()
- fix HHB (highest bank bit) for a619 to fix UBWC corruption
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvFwRUcHGWva7oDeydq1PTiZMduuykCD2MWaFrT4iMGZA@mail.gmail.com
Pull more bcachefs fixes from Kent Overstreet:
"Notable user impacting bugs
- On multi device filesystems, recovery was looping in
btree_trans_too_many_iters(). This checks if a transaction has
touched too many btree paths (because of iteration over many keys),
and isuses a restart to drop unneeded paths.
But it's now possible for some paths to exceed the previous limit
without iteration in the interior btree update path, since the
transaction commit will do alloc updates for every old and new
btree node, and during journal replay we don't use the btree write
buffer for locking reasons and thus those updates use btree paths
when they wouldn't normally.
- Fix a corner case in rebalance when moving extents on a
durability=0 device. This wouldn't be hit when a device was
formatted with durability=0 since in that case we'll only use it as
a write through cache (only cached extents will live on it), but
durability can now be changed on an existing device.
- bch2_get_acl() could rarely forget to handle a transaction restart;
this manifested as the occasional missing acl that came back after
dropping caches.
- Fix a major performance regression on high iops multithreaded write
workloads (only since 6.9-rc1); a previous fix for a deadlock in
the interior btree update path to check the journal watermark
introduced a dependency on the state of btree write buffer flushing
that we didn't want.
- Assorted other repair paths and recovery fixes"
* tag 'bcachefs-2024-04-10' of https://evilpiepirate.org/git/bcachefs: (25 commits)
bcachefs: Fix __bch2_btree_and_journal_iter_init_node_iter()
bcachefs: Kill read lock dropping in bch2_btree_node_lock_write_nofail()
bcachefs: Fix a race in btree_update_nodes_written()
bcachefs: btree_node_scan: Respect member.data_allowed
bcachefs: Don't scan for btree nodes when we can reconstruct
bcachefs: Fix check_topology() when using node scan
bcachefs: fix eytzinger0_find_gt()
bcachefs: fix bch2_get_acl() transaction restart handling
bcachefs: fix the count of nr_freed_pcpu after changing bc->freed_nonpcpu list
bcachefs: Fix gap buffer bug in bch2_journal_key_insert_take()
bcachefs: Rename struct field swap to prevent macro naming collision
MAINTAINERS: Add entry for bcachefs documentation
Documentation: filesystems: Add bcachefs toctree
bcachefs: JOURNAL_SPACE_LOW
bcachefs: Disable errors=panic for BCH_IOCTL_FSCK_OFFLINE
bcachefs: Fix BCH_IOCTL_FSCK_OFFLINE for encrypted filesystems
bcachefs: fix rand_delete unit test
bcachefs: fix ! vs ~ typo in __clear_bit_le64()
bcachefs: Fix rebalance from durability=0 device
bcachefs: Print shutdown journal sequence number
...
Pull x86 mitigations from Thomas Gleixner:
"Mitigations for the native BHI hardware vulnerabilty:
Branch History Injection (BHI) attacks may allow a malicious
application to influence indirect branch prediction in kernel by
poisoning the branch history. eIBRS isolates indirect branch targets
in ring0. The BHB can still influence the choice of indirect branch
predictor entry, and although branch predictor entries are isolated
between modes when eIBRS is enabled, the BHB itself is not isolated
between modes.
Add mitigations against it either with the help of microcode or with
software sequences for the affected CPUs"
[ This also ends up enabling the full mitigation by default despite the
system call hardening, because apparently there are other indirect
calls that are still sufficiently reachable, and the 'auto' case just
isn't hardened enough.
We'll have some more inevitable tweaking in the future - Linus ]
* tag 'nativebhi' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM: x86: Add BHI_NO
x86/bhi: Mitigate KVM by default
x86/bhi: Add BHI mitigation knob
x86/bhi: Enumerate Branch History Injection (BHI) bug
x86/bhi: Define SPEC_CTRL_BHI_DIS_S
x86/bhi: Add support for clearing branch history at syscall entry
x86/syscall: Don't force use of indirect calls for system calls
x86/bugs: Change commas to semicolons in 'spectre_v2' sysfs file
BHI mitigation mode spectre_bhi=auto does not deploy the software
mitigation by default. In a cloud environment, it is a likely scenario
where userspace is trusted but the guests are not trusted. Deploying
system wide mitigation in such cases is not desirable.
Update the auto mode to unconditionally mitigate against malicious
guests. Deploy the software sequence at VMexit in auto mode also, when
hardware mitigation is not available. Unlike the force =on mode,
software sequence is not deployed at syscalls in auto mode.
Suggested-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Branch history clearing software sequences and hardware control
BHI_DIS_S were defined to mitigate Branch History Injection (BHI).
Add cmdline spectre_bhi={on|off|auto} to control BHI mitigation:
auto - Deploy the hardware mitigation BHI_DIS_S, if available.
on - Deploy the hardware mitigation BHI_DIS_S, if available,
otherwise deploy the software sequence at syscall entry and
VMexit.
off - Turn off BHI mitigation.
The default is auto mode which does not deploy the software sequence
mitigation. This is because of the hardening done in the syscall
dispatch path, which is the likely target of BHI.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Modules registering driver with register_virtio_driver() might forget to
set .owner field. i2c-virtio.c for example has it missing. The field
is used by some other kernel parts for reference counting
(try_module_get()), so it is expected that drivers will set it.
Solve the problem by moving this task away from the drivers to the core
virtio code, just like we did for platform_driver in
commit 9447057eaf ("platform_device: use a macro instead of
platform_driver_register").
Fixes: 3cfc883804 ("i2c: virtio: add a virtio i2c frontend driver")
Cc: "Jie Deng" <jie.deng@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-1-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit eb386617be ("bcachefs: Errcode tracepoint, documentation")
adds initial bcachefs documentation (private error codes) but without
any table of contents tree for the filesystem docs, hence Sphinx warns:
Documentation/filesystems/bcachefs/errorcodes.rst: WARNING: document isn't included in any toctree
Add bcachefs toctree to fix above warning.
Fixes: eb386617be ("bcachefs: Errcode tracepoint, documentation")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull devicetree fixes from Rob Herring:
- Fix NIOS2 boot with external DTB
- Add missing synchronization needed between fw_devlink and DT overlay
removals
- Fix some unit-address regex's to be hex only
- Drop some 10+ year old "unstable binding" statements
- Add new SoCs to QCom UFS binding
- Add TPM bindings to TPM maintainers
* tag 'devicetree-fixes-for-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
nios2: Only use built-in devicetree blob if configured to do so
dt-bindings: timer: narrow regex for unit address to hex numbers
dt-bindings: soc: fsl: narrow regex for unit address to hex numbers
dt-bindings: remoteproc: ti,davinci: remove unstable remark
dt-bindings: clock: ti: remove unstable remark
dt-bindings: clock: keystone: remove unstable remark
of: module: prevent NULL pointer dereference in vsnprintf()
dt-bindings: ufs: qcom: document SM6125 UFS
dt-bindings: ufs: qcom: document SC7180 UFS
dt-bindings: ufs: qcom: document SC8180X UFS
of: dynamic: Synchronize of_changeset_destroy() with the devlink removals
driver core: Introduce device_link_wait_removal()
docs: dt-bindings: add missing address/size-cells to example
MAINTAINERS: Add TPM DT bindings to TPM maintainers
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bluetooth and bpf.
Fairly usual collection of driver and core fixes. The large selftest
accompanying one of the fixes is also becoming a common occurrence.
Current release - regressions:
- ipv6: fix infinite recursion in fib6_dump_done()
- net/rds: fix possible null-deref in newly added error path
Current release - new code bugs:
- net: do not consume a full cacheline for system_page_pool
- bpf: fix bpf_arena-related file descriptor leaks in the verifier
- drv: ice: fix freeing uninitialized pointers, fixing misuse of the
newfangled __free() auto-cleanup
Previous releases - regressions:
- x86/bpf: fixes the BPF JIT with retbleed=stuff
- xen-netfront: add missing skb_mark_for_recycle, fix page pool
accounting leaks, revealed by recently added explicit warning
- tcp: fix bind() regression for v6-only wildcard and v4-mapped-v6
non-wildcard addresses
- Bluetooth:
- replace "hci_qca: Set BDA quirk bit if fwnode exists in DT" with
better workarounds to un-break some buggy Qualcomm devices
- set conn encrypted before conn establishes, fix re-connecting to
some headsets which use slightly unusual sequence of msgs
- mptcp:
- prevent BPF accessing lowat from a subflow socket
- don't account accept() of non-MPC client as fallback to TCP
- drv: mana: fix Rx DMA datasize and skb_over_panic
- drv: i40e: fix VF MAC filter removal
Previous releases - always broken:
- gro: various fixes related to UDP tunnels - netns crossing
problems, incorrect checksum conversions, and incorrect packet
transformations which may lead to panics
- bpf: support deferring bpf_link dealloc to after RCU grace period
- nf_tables:
- release batch on table validation from abort path
- release mutex after nft_gc_seq_end from abort path
- flush pending destroy work before exit_net release
- drv: r8169: skip DASH fw status checks when DASH is disabled"
* tag 'net-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
netfilter: validate user input for expected length
net/sched: act_skbmod: prevent kernel-infoleak
net: usb: ax88179_178a: avoid the interface always configured as random address
net: dsa: sja1105: Fix parameters order in sja1110_pcs_mdio_write_c45()
net: ravb: Always update error counters
net: ravb: Always process TX descriptor ring
netfilter: nf_tables: discard table flag update with pending basechain deletion
netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get()
netfilter: nf_tables: reject new basechain after table flag update
netfilter: nf_tables: flush pending destroy work before exit_net release
netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path
netfilter: nf_tables: release batch on table validation from abort path
Revert "tg3: Remove residual error handling in tg3_suspend"
tg3: Remove residual error handling in tg3_suspend
net: mana: Fix Rx DMA datasize and skb_over_panic
net/sched: fix lockdep splat in qdisc_tree_reduce_backlog()
net: phy: micrel: lan8814: Fix when enabling/disabling 1-step timestamping
net: stmmac: fix rx queue priority assignment
net: txgbe: fix i2c dev name cannot match clkdev
net: fec: Set mac_managed_pm during probe
...
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Ensure perf events programmed to count during guest execution are
actually enabled before entering the guest in the nVHE
configuration
- Restore out-of-range handler for stage-2 translation faults
- Several fixes to stage-2 TLB invalidations to avoid stale
translations, possibly including partial walk caches
- Fix early handling of architectural VHE-only systems to ensure E2H
is appropriately set
- Correct a format specifier warning in the arch_timer selftest
- Make the KVM banner message correctly handle all of the possible
configurations
RISC-V:
- Remove redundant semicolon in num_isa_ext_regs()
- Fix APLIC setipnum_le/be write emulation
- Fix APLIC in_clrip[x] read emulation
x86:
- Fix a bug in KVM_SET_CPUID{2,} where KVM looks at the wrong CPUID
entries (old vs. new) and ultimately neglects to clear PV_UNHALT
from vCPUs with HLT-exiting disabled
- Documentation fixes for SEV
- Fix compat ABI for KVM_MEMORY_ENCRYPT_OP
- Fix a 14-year-old goof in a declaration shared by host and guest;
the enabled field used by Linux when running as a guest pushes the
size of "struct kvm_vcpu_pv_apf_data" from 64 to 68 bytes. This is
really unconsequential because KVM never consumes anything beyond
the first 64 bytes, but the resulting struct does not match the
documentation
Selftests:
- Fix spelling mistake in arch_timer selftest"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: arm64: Rationalise KVM banner output
arm64: Fix early handling of FEAT_E2H0 not being implemented
KVM: arm64: Ensure target address is granule-aligned for range TLBI
KVM: arm64: Use TLBI_TTL_UNKNOWN in __kvm_tlb_flush_vmid_range()
KVM: arm64: Don't pass a TLBI level hint when zapping table entries
KVM: arm64: Don't defer TLB invalidation when zapping table entries
KVM: selftests: Fix __GUEST_ASSERT() format warnings in ARM's arch timer test
KVM: arm64: Fix out-of-IPA space translation fault handling
KVM: arm64: Fix host-programmed guest events in nVHE
RISC-V: KVM: Fix APLIC in_clrip[x] read emulation
RISC-V: KVM: Fix APLIC setipnum_le/be write emulation
RISC-V: KVM: Remove second semicolon
KVM: selftests: Fix spelling mistake "trigged" -> "triggered"
Documentation: kvm/sev: clarify usage of KVM_MEMORY_ENCRYPT_OP
Documentation: kvm/sev: separate description of firmware
KVM: SEV: fix compat ABI for KVM_MEMORY_ENCRYPT_OP
KVM: selftests: Check that PV_UNHALT is cleared when HLT exiting is disabled
KVM: x86: Use actual kvm_cpuid.base for clearing KVM_FEATURE_PV_UNHALT
KVM: x86: Introduce __kvm_get_hypervisor_cpuid() helper
KVM: SVM: Return -EINVAL instead of -EBUSY on attempt to re-init SEV/SEV-ES
...
Pull documentation fixes from Jonathan Corbet:
"Four small documentation fixes"
* tag 'docs-6.9-fixes' of git://git.lwn.net/linux:
docs: zswap: fix shell command format
tracing: Fix documentation on tp_printk cmdline option
docs: Fix bitfield handling in kernel-doc
Documentation: dev-tools: Add link to RV docs
KVM/arm64 fixes for 6.9, part #1
- Ensure perf events programmed to count during guest execution
are actually enabled before entering the guest in the nVHE
configuration.
- Restore out-of-range handler for stage-2 translation faults.
- Several fixes to stage-2 TLB invalidations to avoid stale
translations, possibly including partial walk caches.
- Fix early handling of architectural VHE-only systems to ensure E2H is
appropriately set.
- Correct a format specifier warning in the arch_timer selftest.
- Make the KVM banner message correctly handle all of the possible
configurations.
Pull Kbuild fixes from Masahiro Yamada:
- Deduplicate Kconfig entries for CONFIG_CXL_PMU
- Fix unselectable choice entry in MIPS Kconfig, and forbid this
structure
- Remove unused include/asm-generic/export.h
- Fix a NULL pointer dereference bug in modpost
- Enable -Woverride-init warning consistently with W=1
- Drop KCSAN flags from *.mod.c files
* tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: Fix typo HEIGTH to HEIGHT
Documentation/llvm: Note s390 LLVM=1 support with LLVM 18.1.0 and newer
kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries
kbuild: make -Woverride-init warnings more consistent
modpost: do not make find_tosym() return NULL
export.h: remove include/asm-generic/export.h
kconfig: do not reparent the menu inside a choice block
MIPS: move unselectable FIT_IMAGE_FDT_EPM5 out of the "System type" choice
cxl: remove CONFIG_CXL_PMU entry in drivers/cxl/Kconfig
As of the first s390 pull request during the 6.9 merge window,
commit 691632f0e8 ("Merge tag 's390-6.9-1' of
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux"), s390 can be
built with LLVM=1 when using LLVM 18.1.0, which is the first version
that has SystemZ support implemented in ld.lld and llvm-objcopy.
Update the supported architectures table in the Kbuild LLVM
documentation to note this explicitly to make it more discoverable by
users and other developers. Additionally, this brings s390 in line with
the rest of the architectures in the table, which all support LLVM=1.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
kernel-parameters.txt incorrectly states that workings of
kernel.tracepoint_printk sysctl depends on "tracepoint_printk kernel
cmdline option", this is a bit misleading for new users since the actual
cmdline option name is tp_printk.
Fixes: 0daa230296 ("tracing: Add tp_printk cmdline to have tracepoints go to printk()")
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240323231704.1217926-1-vt@altlinux.org
Several Qualcomm Bluetooth controllers lack persistent storage for the
device address and instead one can be provided by the boot firmware
using the 'local-bd-address' devicetree property.
The Bluetooth bindings clearly states that the address should be
specified in little-endian order, but due to a long-standing bug in the
Qualcomm driver which reversed the address some boot firmware has been
providing the address in big-endian order instead.
The only device out there that should be affected by this is the WCN3991
used in some Chromebooks.
Add a 'qcom,local-bd-address-broken' property which can be set on these
platforms to indicate that the boot firmware is using the wrong byte
order.
Note that ChromeOS always updates the kernel and devicetree in lockstep
so that there is no need to handle backwards compatibility with older
devicetrees.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Document already upstreamed and used Qualcomm SC7180 UFS host controller
to fix dtbs_check warnings like:
sc7180-idp.dtb: ufshc@1d84000: compatible:0: 'qcom,sc7180-ufshc' is not one of ...
sc7180-idp.dtb: ufshc@1d84000: clocks: [[39, 99], [39, 7], [39, 98], [39, 107], [36, 0], [39, 106], [39, 105]] is too short
sc7180-idp.dtb: ufshc@1d84000: clock-names: ['core_clk', 'bus_aggr_clk', 'iface_clk', 'core_clk_unipro', ...] is too short
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240326174632.209745-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Document already upstreamed and used Qualcomm SC8180x UFS host
controller to fix dtbs_check warnings like:
sc8180x-primus.dtb: ufshc@1d84000: compatible:0: 'qcom,sc8180x-ufshc' is not one of ['qcom,msm8994-ufshc', ... ]
sc8180x-primus.dtb: ufshc@1d84000: Unevaluated properties are not allowed ('compatible' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240326174632.209745-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Pull x86 fixes from Thomas Gleixner:
- Ensure that the encryption mask at boot is properly propagated on
5-level page tables, otherwise the PGD entry is incorrectly set to
non-encrypted, which causes system crashes during boot.
- Undo the deferred 5-level page table setup as it cannot work with
memory encryption enabled.
- Prevent inconsistent XFD state on CPU hotplug, where the MSR is reset
to the default value but the cached variable is not, so subsequent
comparisons might yield the wrong result and as a consequence the
result prevents updating the MSR.
- Register the local APIC address only once in the MPPARSE enumeration
to prevent triggering the related WARN_ONs() in the APIC and topology
code.
- Handle the case where no APIC is found gracefully by registering a
fake APIC in the topology code. That makes all related topology
functions work correctly and does not affect the actual APIC driver
code at all.
- Don't evaluate logical IDs during early boot as the local APIC IDs
are not yet enumerated and the invoked function returns an error
code. Nothing requires the logical IDs before the final CPUID
enumeration takes place, which happens after the enumeration.
- Cure the fallout of the per CPU rework on UP which misplaced the
copying of boot_cpu_data to per CPU data so that the final update to
boot_cpu_data got lost which caused inconsistent state and boot
crashes.
- Use copy_from_kernel_nofault() in the kprobes setup as there is no
guarantee that the address can be safely accessed.
- Reorder struct members in struct saved_context to work around another
kmemleak false positive
- Remove the buggy code which tries to update the E820 kexec table for
setup_data as that is never passed to the kexec kernel.
- Update the resource control documentation to use the proper units.
- Fix a Kconfig warning observed with tinyconfig
* tag 'x86-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/64: Move 5-level paging global variable assignments back
x86/boot/64: Apply encryption mask to 5-level pagetable update
x86/cpu: Add model number for another Intel Arrow Lake mobile processor
x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD
Documentation/x86: Document that resctrl bandwidth control units are MiB
x86/mpparse: Register APIC address only once
x86/topology: Handle the !APIC case gracefully
x86/topology: Don't evaluate logical IDs during early boot
x86/cpu: Ensure that CPU info updates are propagated on UP
kprobes/x86: Use copy_from_kernel_nofault() to read from unsafe address
x86/pm: Work around false positive kmemleak report in msr_build_context()
x86/kexec: Do not update E820 kexec table for setup_data
x86/config: Fix warning for 'make ARCH=x86_64 tinyconfig'
Pull scheduler doc clarification from Thomas Gleixner:
"A single update for the documentation of the base_slice_ns tunable to
clarify that any value which is less than the tick slice has no effect
because the scheduler tick is not guaranteed to happen within the set
time slice"
* tag 'sched-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/doc: Update documentation for base_slice_ns and CONFIG_HZ relation
The memory bandwidth software controller uses 2^20 units rather than
10^6. See mbm_bw_count() which computes bandwidth using the "SZ_1M"
Linux define for 0x00100000.
Update the documentation to use MiB when describing this feature.
It's too late to fix the mount option "mba_MBps" as that is now an
established user interface.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240322182016.196544-1-tony.luck@intel.com
Pull more clocksource updates from Thomas Gleixner:
"A set of updates for clocksource and clockevent drivers:
- A fix for the prescaler of the ARM global timer where the prescaler
mask define only covered 4 bits while it is actully 8 bits wide.
This obviously restricted the possible range of prescaler
adjustments
- A fix for the RISC-V timer which prevents a timer interrupt being
raised while the timer is initialized
- A set of device tree updates to support new system on chips in
various drivers
- Kernel-doc and other cleanups all over the place"
* tag 'timers-core-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/timer-riscv: Clear timer interrupt on timer initialization
dt-bindings: timer: Add support for cadence TTC PWM
clocksource/drivers/arm_global_timer: Simplify prescaler register access
clocksource/drivers/arm_global_timer: Guard against division by zero
clocksource/drivers/arm_global_timer: Make gt_target_rate unsigned long
dt-bindings: timer: add Ralink SoCs system tick counter
clocksource: arm_global_timer: fix non-kernel-doc comment
clocksource/drivers/arm_global_timer: Remove stray tab
clocksource/drivers/arm_global_timer: Fix maximum prescaler value
clocksource/drivers/imx-sysctr: Add i.MX95 support
clocksource/drivers/imx-sysctr: Drop use global variables
dt-bindings: timer: nxp,sysctr-timer: support i.MX95
dt-bindings: timer: renesas: ostm: Document RZ/Five SoC
dt-bindings: timer: renesas,tmu: Document input capture interrupt
clocksource/drivers/ti-32K: Fix misuse of "/**" comment
clocksource/drivers/stm32: Fix all kernel-doc warnings
dt-bindings: timer: exynos4210-mct: Add google,gs101-mct compatible
clocksource/drivers/imx: Fix -Wunused-but-set-variable warning
Pull RISC-V updates from Palmer Dabbelt:
- Support for various vector-accelerated crypto routines
- Hibernation is now enabled for portable kernel builds
- mmap_rnd_bits_max is larger on systems with larger VAs
- Support for fast GUP
- Support for membarrier-based instruction cache synchronization
- Support for the Andes hart-level interrupt controller and PMU
- Some cleanups around unaligned access speed probing and Kconfig
settings
- Support for ACPI LPI and CPPC
- Various cleanus related to barriers
- A handful of fixes
* tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (66 commits)
riscv: Fix syscall wrapper for >word-size arguments
crypto: riscv - add vector crypto accelerated AES-CBC-CTS
crypto: riscv - parallelize AES-CBC decryption
riscv: Only flush the mm icache when setting an exec pte
riscv: Use kcalloc() instead of kzalloc()
riscv/barrier: Add missing space after ','
riscv/barrier: Consolidate fence definitions
riscv/barrier: Define RISCV_FULL_BARRIER
riscv/barrier: Define __{mb,rmb,wmb}
RISC-V: defconfig: Enable CONFIG_ACPI_CPPC_CPUFREQ
cpufreq: Move CPPC configs to common Kconfig and add RISC-V
ACPI: RISC-V: Add CPPC driver
ACPI: Enable ACPI_PROCESSOR for RISC-V
ACPI: RISC-V: Add LPI driver
cpuidle: RISC-V: Move few functions to arch/riscv
riscv: Introduce set_compat_task() in asm/compat.h
riscv: Introduce is_compat_thread() into compat.h
riscv: add compile-time test into is_compat_task()
riscv: Replace direct thread flag check with is_compat_task()
riscv: Improve arch_get_mmap_end() macro
...
Pull spi fixes from Mark Brown:
"A small collection of fixes that came in since the merge window. Most
of it is relatively minor driver specific fixes, there's also fixes
for error handling with SPI flash devices and a fix restoring delay
control functionality for non-GPIO chip selects managed by the core"
* tag 'spi-fix-v6.9-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-mt65xx: Fix NULL pointer access in interrupt handler
spi: docs: spidev: fix echo command format
spi: spi-imx: fix off-by-one in mx51 CPU mode burst length
spi: lm70llp: fix links in doc and comments
spi: Fix error code checking in spi_mem_exec_op()
spi: Restore delays for non-GPIO chip select
spi: lpspi: Avoid potential use-after-free in probe()
Pull more sound fixes from Takashi Iwai:
"The remaining fixes for 6.9-rc1 that have been gathered in this week.
More about ASoC at this time (one long-standing fix for compress
offload, SOF, AMD ACP, Rockchip, Cirrus and tlv320 stuff) while
another regression fix in ALSA core and a couple of HD-audio quirks as
usual are included"
* tag 'sound-fix2-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: control: Fix unannotated kfree() cleanup
ALSA: hda/realtek: Add quirks for some Clevo laptops
ALSA: hda/realtek: Add quirk for HP Spectre x360 14 eu0000
ALSA: hda/realtek: fix the hp playback volume issue for LG machines
ASoC: soc-compress: Fix and add DPCM locking
ASoC: SOF: amd: Skip IRAM/DRAM size modification for Steam Deck OLED
ASoC: SOF: amd: Move signed_fw_image to struct acp_quirk_entry
ASoC: amd: yc: Revert "add new YC platform variant (0x63) support"
ASoC: amd: yc: Revert "Fix non-functional mic on Lenovo 21J2"
ASoC: soc-core.c: Skip dummy codec when adding platforms
ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates
ASoC: dt-bindings: cirrus,cs42l43: Fix 'gpio-ranges' schema
ASoC: amd: yc: Fix non-functional mic on ASUS M7600RE
ASoC: tlv320adc3xxx: Don't strip remove function when driver is builtin
Pull more i2c updates from Wolfram Sang:
"Some more I2C updates after the dependencies have been merged now.
Plus a DT binding fix"
* tag 'i2c-for-6.9-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: qcom,i2c-cci: Fix OV7251 'data-lanes' entries
i2c: muxes: pca954x: Allow sharing reset GPIO
i2c: nomadik: sort includes
i2c: nomadik: support Mobileye EyeQ5 I2C controller
i2c: nomadik: fetch i2c-transfer-timeout-us property from devicetree
i2c: nomadik: replace jiffies by ktime for FIFO flushing timeout
i2c: nomadik: support short xfer timeouts using waitqueue & hrtimer
i2c: nomadik: use bitops helpers
i2c: nomadik: simplify IRQ masking logic
i2c: nomadik: rename private struct pointers from dev to priv
dt-bindings: i2c: nomadik: add mobileye,eyeq5-i2c bindings and example
Pull RTC updates from Alexandre Belloni:
"Subsytem:
- rtc_class is now const
Drivers:
- ds1511: cleanup, set date and time range and alarm offset limit
- max31335: fix interrupt handler
- pcf8523: improve suspend support"
* tag 'rtc-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (28 commits)
MAINTAINER: Include linux-arm-msm for Qualcomm RTC patches
dt-bindings: rtc: zynqmp: Add support for Versal/Versal NET SoCs
rtc: class: make rtc_class constant
dt-bindings: rtc: abx80x: Improve checks on trickle charger constraints
MAINTAINERS: adjust file entry in ARM/Mediatek RTC DRIVER
rtc: nct3018y: fix possible NULL dereference
rtc: max31335: fix interrupt status reg
rtc: mt6397: select IRQ_DOMAIN instead of depending on it
dt-bindings: rtc: abx80x: convert to yaml
rtc: m41t80: Use the unified property API get the wakeup-source property
dt-bindings: at91rm9260-rtt: add sam9x7 compatible
dt-bindings: rtc: convert MT7622 RTC to the json-schema
dt-bindings: rtc: convert MT2717 RTC to the json-schema
rtc: pcf8523: add suspend handlers for alarm IRQ
rtc: ds1511: set alarm offset limit
rtc: ds1511: set range
rtc: ds1511: drop inline/noinline hints
rtc: ds1511: rename pdata
rtc: ds1511: implement ds1511_rtc_read_alarm properly
rtc: ds1511: remove partial alarm support
...
Pull UBI and UBIFS updates from Richard Weinberger:
"UBI:
- Add Zhihao Cheng as reviewer
- Attach via device tree
- Add NVMEM layer
- Various fastmap related fixes
UBIFS:
- Add Zhihao Cheng as reviewer
- Convert to folios
- Various fixes (memory leaks in error paths, function prototypes)"
* tag 'ubifs-for-linus-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: (34 commits)
mtd: ubi: fix NVMEM over UBI volumes on 32-bit systems
mtd: ubi: provide NVMEM layer over UBI volumes
mtd: ubi: populate ubi volume fwnode
mtd: ubi: introduce pre-removal notification for UBI volumes
mtd: ubi: attach from device tree
mtd: ubi: block: use notifier to create ubiblock from parameter
dt-bindings: mtd: ubi-volume: allow UBI volumes to provide NVMEM
dt-bindings: mtd: add basic bindings for UBI
ubifs: Queue up space reservation tasks if retrying many times
ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path
ubifs: dbg_check_idx_size: Fix kmemleak if loading znode failed
ubi: Correct the number of PEBs after a volume resize failure
ubi: fix slab-out-of-bounds in ubi_eba_get_ldesc+0xfb/0x130
ubi: correct the calculation of fastmap size
ubifs: Remove unreachable code in dbg_check_ltab_lnum
ubifs: fix function pointer cast warnings
ubifs: fix sort function prototype
ubi: Check for too small LEB size in VTBL code
MAINTAINERS: Add Zhihao Cheng as UBI/UBIFS reviewer
ubifs: Convert populate_page() to take a folio
...
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, netfilter, wireguard and IPsec.
I'd like to highlight [ lowlight? - Linus ] Florian W stepping down as
a netfilter maintainer due to constant stream of bug reports. Not sure
what we can do but IIUC this is not the first such case.
Current release - regressions:
- rxrpc: fix use of page_frag_alloc_align(), it changed semantics and
we added a new caller in a different subtree
- xfrm: allow UDP encapsulation only in offload modes
Current release - new code bugs:
- tcp: fix refcnt handling in __inet_hash_connect()
- Revert "net: Re-use and set mono_delivery_time bit for userspace
tstamp packets", conflicted with some expectations in BPF uAPI
Previous releases - regressions:
- ipv4: raw: fix sending packets from raw sockets via IPsec tunnels
- devlink: fix devlink's parallel command processing
- veth: do not manipulate GRO when using XDP
- esp: fix bad handling of pages from page_pool
Previous releases - always broken:
- report RCU QS for busy network kthreads (with Paul McK's blessing)
- tcp/rds: fix use-after-free on netns with kernel TCP reqsk
- virt: vmxnet3: fix missing reserved tailroom with XDP
Misc:
- couple of build fixes for Documentation"
* tag 'net-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits)
selftests: forwarding: Fix ping failure due to short timeout
MAINTAINERS: step down as netfilter maintainer
netfilter: nf_tables: Fix a memory leak in nf_tables_updchain
net: dsa: mt7530: fix handling of all link-local frames
net: dsa: mt7530: fix link-local frames that ingress vlan filtering ports
bpf: report RCU QS in cpumap kthread
net: report RCU QS on threaded NAPI repolling
rcu: add a helper to report consolidated flavor QS
ionic: update documentation for XDP support
lib/bitmap: Fix bitmap_scatter() and bitmap_gather() kernel doc
netfilter: nf_tables: do not compare internal table flags on updates
netfilter: nft_set_pipapo: release elements in clone only from destroy path
octeontx2-af: Use separate handlers for interrupts
octeontx2-pf: Send UP messages to VF only when VF is up.
octeontx2-pf: Use default max_active works instead of one
octeontx2-pf: Wait till detach_resources msg is complete
octeontx2: Detect the mbox up or down message via register
devlink: fix port new reply cmd type
tcp: Clear req->syncookie in reqsk_alloc().
net/bnx2x: Prevent access to a freed page in page_pool
...
Pull Kbuild updates from Masahiro Yamada:
- Generate a list of built DTB files (arch/*/boot/dts/dtbs-list)
- Use more threads when building Debian packages in parallel
- Fix warnings shown during the RPM kernel package uninstallation
- Change OBJECT_FILES_NON_STANDARD_*.o etc. to take a relative path to
Makefile
- Support GCC's -fmin-function-alignment flag
- Fix a null pointer dereference bug in modpost
- Add the DTB support to the RPM package
- Various fixes and cleanups in Kconfig
* tag 'kbuild-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (67 commits)
kconfig: tests: test dependency after shuffling choices
kconfig: tests: add a test for randconfig with dependent choices
kconfig: tests: support KCONFIG_SEED for the randconfig runner
kbuild: rpm-pkg: add dtb files in kernel rpm
kconfig: remove unneeded menu_is_visible() call in conf_write_defconfig()
kconfig: check prompt for choice while parsing
kconfig: lxdialog: remove unused dialog colors
kconfig: lxdialog: fix button color for blackbg theme
modpost: fix null pointer dereference
kbuild: remove GCC's default -Wpacked-bitfield-compat flag
kbuild: unexport abs_srctree and abs_objtree
kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1
kconfig: remove named choice support
kconfig: use linked list in get_symbol_str() to iterate over menus
kconfig: link menus to a symbol
kbuild: fix inconsistent indentation in top Makefile
kbuild: Use -fmin-function-alignment when available
alpha: merge two entries for CONFIG_ALPHA_GAMMA
alpha: merge two entries for CONFIG_ALPHA_EV4
kbuild: change DTC_FLAGS_<basetarget>.o to take the path relative to $(obj)
...
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and a number of other driver
subsystem updates for 6.9-rc1. Included in here are:
- IIO driver updates, loads of new ones and evolution of existing ones
- coresight driver updates
- const cleanups for many driver subsystems
- speakup driver additions
- platform remove callback void cleanups
- mei driver updates
- mhi driver updates
- cdx driver updates for MSI interrupt handling
- nvmem driver updates
- other smaller driver updates and cleanups, full details in the
shortlog
All of these have been in linux-next for a long time with no reported
issue, other than a build warning for the speakup driver"
The build warning hits clang and is a gcc (and C23) extension, and is
fixed up in the merge.
Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/
* tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits)
binder: remove redundant variable page_addr
uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion
uio_pruss: UIO_MEM_DMA_COHERENT conversion
cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT
uio: introduce UIO_MEM_DMA_COHERENT type
cdx: add MSI support for CDX bus
pps: use cflags-y instead of EXTRA_CFLAGS
speakup: Add /dev/synthu device
speakup: Fix 8bit characters from direct synth
parport: sunbpp: Convert to platform remove callback returning void
parport: amiga: Convert to platform remove callback returning void
char: xillybus: Convert to platform remove callback returning void
vmw_balloon: change maintainership
MAINTAINERS: change the maintainer for hpilo driver
char: xilinx_hwicap: Fix NULL vs IS_ERR() bug
hpet: remove hpets::hp_clocksource
platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH
char: xilinx_hwicap: drop casting to void in dev_set_drvdata
greybus: move is_gb_* functions out of greybus.h
greybus: Remove usage of the deprecated ida_simple_xx() API
...
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY/Serial driver updates and cleanups for
6.9-rc1. Included in here are:
- more tty cleanups from Jiri
- loads of 8250 driver cleanups from Andy
- max310x driver updates
- samsung serial driver updates
- uart_prepare_sysrq_char() updates for many drivers
- platform driver remove callback void cleanups
- stm32 driver updates
- other small tty/serial driver updates
All of these have been in linux-next for a long time with no reported
issues"
* tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
dt-bindings: serial: stm32: add power-domains property
serial: 8250_dw: Replace ACPI device check by a quirk
serial: Lock console when calling into driver before registration
serial: 8250_uniphier: Switch to use uart_read_port_properties()
serial: 8250_tegra: Switch to use uart_read_port_properties()
serial: 8250_pxa: Switch to use uart_read_port_properties()
serial: 8250_omap: Switch to use uart_read_port_properties()
serial: 8250_of: Switch to use uart_read_port_properties()
serial: 8250_lpc18xx: Switch to use uart_read_port_properties()
serial: 8250_ingenic: Switch to use uart_read_port_properties()
serial: 8250_dw: Switch to use uart_read_port_properties()
serial: 8250_bcm7271: Switch to use uart_read_port_properties()
serial: 8250_bcm2835aux: Switch to use uart_read_port_properties()
serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties()
serial: port: Introduce a common helper to read properties
serial: core: Add UPIO_UNKNOWN constant for unknown port type
serial: core: Move struct uart_port::quirks closer to possible values
serial: sh-sci: Call sci_serial_{in,out}() directly
serial: core: only stop transmit when HW fifo is empty
serial: pch: Use uart_prepare_sysrq_char().
...
