Several fixes for:
- amdxdna: Fix for a deadlock, a NULL pointer dereference, a suspend
failure, a hang, an out-of-bounds access, a buffer overflow, input
sanitization and other minor fixes.
- dw-dp: An error handling fix
- ethosu: A binary shift overflow fix
- imx: An error handling fix
- logicvc: A dt node reference leak fix
- nouveau: A WARN_ON removal
- samsung-dsim: A memory leak fix
- sharp-memory: A NULL pointer dereference fix
- vmgfx: A reference count and error handling fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260226-heretic-stimulating-swine-6a2f27@penduick
A workaround was introduced in commit 1fb710793c ("drm/amdgpu: Enable
MES lr_compute_wa by default") to help with some hangs observed in gfx1151.
This WA didn't fully fix the issue. It was actually fixed by adjusting
the VGPR size to the correct value that matched the hardware in commit
b42f3bf953 ("drm/amdkfd: bump minimum vgpr size for gfx1151").
There are reports of instability on other products with newer GC microcode
versions, and I believe they're caused by this workaround. As we don't
need the workaround any more, remove it.
Fixes: b42f3bf953 ("drm/amdkfd: bump minimum vgpr size for gfx1151")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9973e64bd6ee7642860a6f3b6958cbf14e89cabd)
Cc: stable@vger.kernel.org
If the device has not recovered after slot reset is called, it goes to
out label for error handling. There it could make decision based on
uninitialized hive pointer and could result in accessing an uninitialized
list.
Initialize the list and hive properly so that it handles the error
situation and also releases the reset domain lock which is acquired
during error_detected callback.
Fixes: 732c6cefc1 ("drm/amdgpu: Replace tmp_adev with hive in amdgpu_pci_slot_reset")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bb71362182e59caa227e4192da5a612b09349696)
This will set AMDGPU_VCN_SMU_DPM_INTERFACE_* smu_type
based on soc type and fixing ring timeout issue seen
for DPM enabled case.
Signed-off-by: sguttula <suresh.guttula@amd.com>
Reviewed-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f0f23c315b38c55e8ce9484cf59b65811f350630)
This can be called while preemption is disabled, for example by
dcn32_internal_validate_bw which is called with the FPU active.
Fixes "BUG: scheduling while atomic" messages I encounter on my Navi31
machine.
Signed-off-by: Natalie Vock <natalie.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b42dae2ebc5c84a68de63ec4ffdfec49362d53f1)
Cc: stable@vger.kernel.org
Huge input values in amdgpu_userq_wait_ioctl can lead to a OOM and
could be exploited.
So check these input value against AMDGPU_USERQ_MAX_HANDLES
which is big enough value for genuine use cases and could
potentially avoid OOM.
v2: squash in Srini's fix
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fcec012c664247531aed3e662f4280ff804d1476)
Cc: stable@vger.kernel.org
Huge input values in amdgpu_userq_signal_ioctl can lead to a OOM and
could be exploited.
So check these input value against AMDGPU_USERQ_MAX_HANDLES
which is big enough value for genuine use cases and could
potentially avoid OOM.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit be267e15f99bc97cbe202cd556717797cdcf79a5)
Cc: stable@vger.kernel.org
Userspace can either deliberately pass in the too small num_fences, or the
required number can legitimately grow between the two calls to the userq
wait ioctl. In both cases we do not want the emit the kernel warning
backtrace since nothing is wrong with the kernel and userspace will simply
get an errno reported back. So lets simply drop the WARN_ONs.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: a292fdecd7 ("drm/amdgpu: Implement userqueue signal/wait IOCTL")
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2c333ea579de6cc20ea7bc50e9595ef72863e65c)
When generating the default LRC, if a register is not masked, we apply
any save-restore programming necessary via a read-modify-write sequence
that will ensure we only update the relevant bits/fields without
clobbering the rest of the register. However some of the registers that
need to be updated might be MCR registers which require steering to a
non-terminated instance to ensure we can read back a valid, non-zero
value. The steering of reads originating from a command streamer is
controlled by register CS_MMIO_GROUP_INSTANCE_SELECT. Emit additional
MI_LRI commands to update the steering before any RMW of an MCR register
to ensure the reads are performed properly.
Note that needing to perform a RMW of an MCR register while building the
default LRC is pretty rare. Most of the MCR registers that are part of
an engine's LRCs are also masked registers, so no MCR is necessary.
Fixes: f2f90989cc ("drm/xe: Avoid reading RMW registers in emit_wa_job")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patch.msgid.link/20260206223058.387014-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 6c2e331c915ba9e774aa847921262805feb00863)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
In samsung_dsim_host_attach(), drm_bridge_add() is called to add the
bridge. However, if samsung_dsim_register_te_irq() or
pdata->host_ops->attach() fails afterwards, the function returns
without removing the bridge, causing a memory leak.
Fix this by adding proper error handling with goto labels to ensure
drm_bridge_remove() is called in all error paths. Also ensure that
samsung_dsim_unregister_te_irq() is called if the attach operation
fails after the TE IRQ has been registered.
samsung_dsim_unregister_te_irq() function is moved without changes
to be before samsung_dsim_host_attach() to avoid forward declaration.
Fixes: e7447128ca ("drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge")
Cc: stable@vger.kernel.org
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260209184115.10937-1-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Return the value of devm_drm_bridge_add() in order to propagate the
error properly, if it fails due to resource allocation failure or bridge
registration failure.
This ensures that the probe function fails safely rather than proceeding
with a potentially incomplete bridge setup.
Fixes: bf7e97910b ("drm/imx: parallel-display: add the bridge before attaching it")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260204090629.2209542-1-nichen@iscas.ac.cn
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "void **" but the returned type will be "void ***".
These are the same allocation size (pointer size), but the types do not
match. Adjust the allocation type to match the assignment.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260206222151.work.016-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Ensure that the DAC output is enabled at the correct time by
moving it to the DCE link encoder similarly to how digital
outputs are enabled.
This also removes the call to DAC1EncoderControl from the DCE
HWSS, which always felt like it was a hacky solution.
Fixes: 0fbe321a93 ("drm/amd/display: Implement DCE analog link encoders (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apparently the VBIOS SelectCRTC_Source function overwrites
a few registers (such as FMT_*) which DC writes in a different
place, which can cause problems.
Instead of using the SelectCRTC_Source function from the
VBIOS, use the DAC_SOURCE_SELECT register directly, similarly
to how it is done for digital link encoders.
Fixes: 3be26d81b1 ("drm/amd/display: Support DAC in dce110_hwseq")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VBIOS DAC1EncoderControl() function can initialize the DAC,
by writing board-specific values to certain registers.
Call this at link encoder hardware initialization time similarly
to how the equivalent UNIPHYTransmitterControl initialization
is done.
This fixes DAC output on the Radeon HD 7790.
Also remove the ENCODER_CONTROL_SETUP enum from the
dac_encoder_control_prepare_params function which is actually
not a supported operation for DAC encoders.
Fixes: 0fbe321a93 ("drm/amd/display: Implement DCE analog link encoders (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Mauro Rossi <issor.oruam@gmail.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apparently, the VBIOS DAC1EncoderControl function is much more
graceful about turning off the DAC. It writes various DAC
registers in a specific sequence. Use that instead of just
clearing the DAC_ENABLE register.
Do this in just the dce110_link_encoder_disable_output
function and remove it from the HWSS.
Fixes: 0fbe321a93 ("drm/amd/display: Implement DCE analog link encoders (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Mauro Rossi <issor.oruam@gmail.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The analog engine is already there in the link_analog_engine
variable and assigned to enc_init_data.analog_engine already.
I suspect this was a rebase mistake.
Fixes: 436d0d22aa ("drm/amd/display: Pass proper DAC encoder ID to VBIOS")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It turned that using 4 level page tables on GMC generations which support
57bit VAs actually doesn't work at all.
Background is that the GMC actually can't switch between 4 and 5 levels,
but rather just uses a subset of address space when less than 5 levels are
selected.
Philip already removed the automatically switch to 4levels, now fix it as
well should it be enabled by module parameters.
v2: fix AMDGPU_GMC_HOLE_MASK as well, fix off by one issue pointed out
by Philip
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
xgmi support atomics between links. Set them to true. This only set for
GFX12 onwards to avoid regression on older generations
v2: Use correct xgmi flag that indicates CPU connection
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes issues when the code moves forward with a potential
NULL pointer, without checking.
Removed one redundant NULL check for a function parameter. This check
is already done in the only caller.
Signed-off-by: Andrew Martin <andrew.martin@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The plane scaling hw seems to have the same min/max plane scaling limits
for all 16 bpc / 64 bpp interleaved pixel color formats.
Therefore add cases to amdgpu_dm_plane_get_min_max_dc_plane_scaling() for
all the 16 bpc fixed-point / unorm formats to use the same .fp16
up/downscaling factor limits as used by the fp16 floating point formats.
So far, 16 bpc unorm formats were not handled, and the default: path
returned max/min factors for 32 bpp argb8888 formats, which were wrong
and bigger than what many DCE / DCN hw generations could handle.
The result sometimes was misscaling of framebuffers with
DRM_FORMAT_XRGB16161616, DRM_FORMAT_ARGB16161616, DRM_FORMAT_XBGR16161616,
DRM_FORMAT_ABGR16161616, leading to very wrong looking display, as tested
on Polaris11 / DCE-11.2.
So far this went unnoticed, because only few userspace clients used such
16 bpc unorm framebuffers, and those didn't use hw plane scaling, so they
did not experience this issue.
With upcoming Mesa 26 exposing 16 bpc unorm formats under both OpenGL
and Vulkan under Wayland, and the upcoming GNOME 50 Mutter Wayland
compositor allowing for direct scanout of these formats, the scaling
hw will be used on these formats if possible for HiDPI display scaling,
so it is important to use the correct hw scaling limits to avoid wrong
display.
Tested on AMD Polaris 11 / DCE 11.2 with upcoming Mesa 26 and GNOME 50
on HiDPI displays with scaling enabled. The mutter Wayland compositor now
correctly falls back to scaling via desktop compositing instead of direct
scanout, thereby avoiding wrong image display. For unscaled mode, it
correctly uses direct scanout.
Fixes: 580204038f ("drm/amd/display: Enable support for 16 bpc fixed-point framebuffers.")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This solves a priority inversion issue, caused by the language
runtime making high-priority queues wait for activity on
lower-priority queues.
Signed-off-by: Andrew Martin <andrew.martin@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Shaper programming has high chance to fail on first time after
power-on or reboot. This can be verified by running IGT's kms_colorop.
[How]
Always power on the shaper and 3DLUT before programming by
removing the debug flag of low power mode.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Fix fastboot broken in driver.
This is caused by an open source backport change 7495962c.
from the comment, the intended check is to disable fastboot
for pre-DCN10. but the logic check is reversed, and causes
fastboot to be disabled on all DCN10 and after.
fastboot is for driver trying to pick up bios used hw setting
and bypass reprogramming the hw if dc_validate_boot_timing()
condition meets.
Fixes: 7495962cbc ("drm/amd/display: Disable fastboot on DCE 6 too")
Cc: stable@vger.kernel.org
Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com>
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
