Pull bpf fixes from Alexei Starovoitov:
- Fix interaction between livepatch and BPF fexit programs (Song Liu)
With Steven and Masami acks.
- Fix stack ORC unwind from BPF kprobe_multi (Jiri Olsa)
With Steven and Masami acks.
- Fix out of bounds access in widen_imprecise_scalars() in the verifier
(Eduard Zingerman)
- Fix conflicts between MPTCP and BPF sockmap (Jiayuan Chen)
- Fix net_sched storage collision with BPF data_meta/data_end (Eric
Dumazet)
- Add _impl suffix to BPF kfuncs with implicit args to avoid breaking
them in bpf-next when KF_IMPLICIT_ARGS is added (Mykyta Yatsenko)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test widen_imprecise_scalars() with different stack depth
bpf: account for current allocated stack depth in widen_imprecise_scalars()
bpf: Add bpf_prog_run_data_pointers()
selftests/bpf: Add mptcp test with sockmap
mptcp: Fix proto fallback detection with BPF
mptcp: Disallow MPTCP subflows from sockmap
selftests/bpf: Add stacktrace ips test for raw_tp
selftests/bpf: Add stacktrace ips test for kprobe_multi/kretprobe_multi
x86/fgraph,bpf: Fix stack ORC unwind from kprobe_multi return probe
Revert "perf/x86: Always store regs->ip in perf_callchain_kernel()"
bpf: add _impl suffix for bpf_stream_vprintk() kfunc
bpf:add _impl suffix for bpf_task_work_schedule* kfuncs
selftests/bpf: Add tests for livepatch + bpf trampoline
ftrace: bpf: Fix IPMODIFY + DIRECT in modify_ftrace_direct()
ftrace: Fix BPF fexit with livepatch
syzbot found that cls_bpf_classify() is able to change
tc_skb_cb(skb)->drop_reason triggering a warning in sk_skb_reason_drop().
WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 __sk_skb_reason_drop net/core/skbuff.c:1189 [inline]
WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 sk_skb_reason_drop+0x76/0x170 net/core/skbuff.c:1214
struct tc_skb_cb has been added in commit ec624fe740 ("net/sched:
Extend qdisc control block with tc control block"), which added a wrong
interaction with db58ba4592 ("bpf: wire in data and data_end for
cls_act_bpf").
drop_reason was added later.
Add bpf_prog_run_data_pointers() helper to save/restore the net_sched
storage colliding with BPF data_meta/data_end.
Fixes: ec624fe740 ("net/sched: Extend qdisc control block with tc control block")
Reported-by: syzbot <syzkaller@googlegroups.com>
Closes: https://lore.kernel.org/netdev/6913437c.a70a0220.22f260.013b.GAE@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20251112125516.1563021-1-edumazet@google.com
The sockmap feature allows bpf syscall from userspace, or based
on bpf sockops, replacing the sk_prot of sockets during protocol stack
processing with sockmap's custom read/write interfaces.
'''
tcp_rcv_state_process()
syn_recv_sock()/subflow_syn_recv_sock()
tcp_init_transfer(BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB)
bpf_skops_established <== sockops
bpf_sock_map_update(sk) <== call bpf helper
tcp_bpf_update_proto() <== update sk_prot
'''
When the server has MPTCP enabled but the client sends a TCP SYN
without MPTCP, subflow_syn_recv_sock() performs a fallback on the
subflow, replacing the subflow sk's sk_prot with the native sk_prot.
'''
subflow_syn_recv_sock()
subflow_ulp_fallback()
subflow_drop_ctx()
mptcp_subflow_ops_undo_override()
'''
Then, this subflow can be normally used by sockmap, which replaces the
native sk_prot with sockmap's custom sk_prot. The issue occurs when the
user executes accept::mptcp_stream_accept::mptcp_fallback_tcp_ops().
Here, it uses sk->sk_prot to compare with the native sk_prot, but this
is incorrect when sockmap is used, as we may incorrectly set
sk->sk_socket->ops.
This fix uses the more generic sk_family for the comparison instead.
Additionally, this also prevents a WARNING from occurring:
result from ./scripts/decode_stacktrace.sh:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 337 at net/mptcp/protocol.c:68 mptcp_stream_accept \
(net/mptcp/protocol.c:4005)
Modules linked in:
...
PKRU: 55555554
Call Trace:
<TASK>
do_accept (net/socket.c:1989)
__sys_accept4 (net/socket.c:2028 net/socket.c:2057)
__x64_sys_accept (net/socket.c:2067)
x64_sys_call (arch/x86/entry/syscall_64.c:41)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
RIP: 0033:0x7f87ac92b83d
---[ end trace 0000000000000000 ]---
Fixes: 0b4f33def7 ("mptcp: fix tcp fallback crash")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20251111060307.194196-3-jiayuan.chen@linux.dev
The sockmap feature allows bpf syscall from userspace, or based on bpf
sockops, replacing the sk_prot of sockets during protocol stack processing
with sockmap's custom read/write interfaces.
'''
tcp_rcv_state_process()
subflow_syn_recv_sock()
tcp_init_transfer(BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB)
bpf_skops_established <== sockops
bpf_sock_map_update(sk) <== call bpf helper
tcp_bpf_update_proto() <== update sk_prot
'''
Consider two scenarios:
1. When the server has MPTCP enabled and the client also requests MPTCP,
the sk passed to the BPF program is a subflow sk. Since subflows only
handle partial data, replacing their sk_prot is meaningless and will
cause traffic disruption.
2. When the server has MPTCP enabled but the client sends a TCP SYN
without MPTCP, subflow_syn_recv_sock() performs a fallback on the
subflow, replacing the subflow sk's sk_prot with the native sk_prot.
'''
subflow_ulp_fallback()
subflow_drop_ctx()
mptcp_subflow_ops_undo_override()
'''
Subsequently, accept::mptcp_stream_accept::mptcp_fallback_tcp_ops()
converts the subflow to plain TCP.
For the first case, we should prevent it from being combined with sockmap
by setting sk_prot->psock_update_sk_prot to NULL, which will be blocked by
sockmap's own flow.
For the second case, since subflow_syn_recv_sock() has already restored
sk_prot to native tcp_prot/tcpv6_prot, no further action is needed.
Fixes: cec37a6e41 ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20251111060307.194196-2-jiayuan.chen@linux.dev
For HSRv0, the path_id has the following meaning:
- 0000: PRP supervision frame
- 0001-1001: HSR ring identifier
- 1010-1011: Frames from PRP network (A/B, with RedBoxes)
- 1111: HSR supervision frame
Follow the IEC 62439-3:2010 standard more closely by setting the right
path_id for HSRv0 supervision frames (actually, it is correctly set when
the frame is constructed, but hsr_set_path_id() overwrites it) and set a
fixed HSR ring identifier of 1. The ring identifier seems to be generally
unused and we ignore it anyways on reception, but some fixed identifier is
definitely better than using one identifier in one direction and a wrong
identifier in the other.
This was also the behavior before commit f266a683a4 ("net/hsr: Better
frame dispatch") which introduced the alternating path_id. This was later
moved to hsr_set_path_id() in commit 451d8123f8 ("net: prp: add packet
handling support").
The IEC 62439-3:2010 also contains 6 unused bytes after the MacAddressA in
the HSRv0 supervision frames. Adjust a TODO comment accordingly.
Fixes: f266a683a4 ("net/hsr: Better frame dispatch")
Fixes: 451d8123f8 ("net: prp: add packet handling support")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/ea0d5133cd593856b2fa673d6e2067bf1d4d1794.1762876095.git.fmaurer@redhat.com
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull nfsd fixes from Chuck Lever:
"Address recently reported issues or issues found at the recent NFS
bake-a-thon held in Raleigh, NC.
Issues reported with v6.18-rc:
- Address a kernel build issue
- Reorder SEQUENCE processing to avoid spurious NFS4ERR_SEQ_MISORDERED
Issues that need expedient stable backports:
- Close a refcount leak exposure
- Report support for NFSv4.2 CLONE correctly
- Fix oops during COPY_NOTIFY processing
- Prevent rare crash after XDR encoding failure
- Prevent crash due to confused or malicious NFSv4.1 client"
* tag 'nfsd-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
Revert "SUNRPC: Make RPCSEC_GSS_KRB5 select CRYPTO instead of depending on it"
nfsd: ensure SEQUENCE replay sends a valid reply.
NFSD: Never cache a COMPOUND when the SEQUENCE operation fails
NFSD: Skip close replay processing if XDR encoding fails
NFSD: free copynotify stateid in nfs4_free_ol_stateid()
nfsd: add missing FATTR4_WORD2_CLONE_BLKSIZE from supported attributes
nfsd: fix refcount leak in nfsd_set_fh_dentry()
Johannes Berg says:
====================
Couple more fixes:
- mwl8k: work around FW expecting a DSSS element in beacons
- ath11k: report correct TX status
- iwlwifi: avoid toggling links due to wrong element use
- iwlwifi: fix beacon template rate on older devices
- iwlwifi: fix loop iterator being used after loop
- mac80211: disallow address changes while using the address
- mac80211: avoid bad rate warning in monitor/sniffer mode
- hwsim: fix potential NULL deref (on monitor injection)
* tag 'wireless-2025-11-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: mld: always take beacon ies in link grading
wifi: iwlwifi: mvm: fix beacon template/fixed rate
wifi: iwlwifi: fix aux ROC time event iterator usage
wifi: mwl8k: inject DSSS Parameter Set element into beacons if missing
wifi: mac80211_hwsim: Fix possible NULL dereference
wifi: mac80211: skip rate verification for not captured PSDUs
wifi: mac80211: reject address change while connecting
wifi: ath11k: zero init info->status in wmi_process_mgmt_tx_comp()
====================
Link: https://patch.msgid.link/20251112114621.15716-5-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The sit driver's packet transmission path calls: sit_tunnel_xmit() ->
update_or_create_fnhe(), which lead to fnhe_remove_oldest() being called
to delete entries exceeding FNHE_RECLAIM_DEPTH+random.
The race window is between fnhe_remove_oldest() selecting fnheX for
deletion and the subsequent kfree_rcu(). During this time, the
concurrent path's __mkroute_output() -> find_exception() can fetch the
soon-to-be-deleted fnheX, and rt_bind_exception() then binds it with a
new dst using a dst_hold(). When the original fnheX is freed via RCU,
the dst reference remains permanently leaked.
CPU 0 CPU 1
__mkroute_output()
find_exception() [fnheX]
update_or_create_fnhe()
fnhe_remove_oldest() [fnheX]
rt_bind_exception() [bind dst]
RCU callback [fnheX freed, dst leak]
This issue manifests as a device reference count leak and a warning in
dmesg when unregistering the net device:
unregister_netdevice: waiting for sitX to become free. Usage count = N
Ido Schimmel provided the simple test validation method [1].
The fix clears 'oldest->fnhe_daddr' before calling fnhe_flush_routes().
Since rt_bind_exception() checks this field, setting it to zero prevents
the stale fnhe from being reused and bound to a new dst just before it
is freed.
[1]
ip netns add ns1
ip -n ns1 link set dev lo up
ip -n ns1 address add 192.0.2.1/32 dev lo
ip -n ns1 link add name dummy1 up type dummy
ip -n ns1 route add 192.0.2.2/32 dev dummy1
ip -n ns1 link add name gretap1 up arp off type gretap \
local 192.0.2.1 remote 192.0.2.2
ip -n ns1 route add 198.51.0.0/16 dev gretap1
taskset -c 0 ip netns exec ns1 mausezahn gretap1 \
-A 198.51.100.1 -B 198.51.0.0/16 -t udp -p 1000 -c 0 -q &
taskset -c 2 ip netns exec ns1 mausezahn gretap1 \
-A 198.51.100.1 -B 198.51.0.0/16 -t udp -p 1000 -c 0 -q &
sleep 10
ip netns pids ns1 | xargs kill
ip netns del ns1
Cc: stable@vger.kernel.org
Fixes: 67d6d681e1 ("ipv4: make exception cache less predictible")
Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251111064328.24440-1-nashuiliang@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 100dfa74ca ("inet: dev_queue_xmit() llist adoption")
I started seeing many qdisc requeues on IDPF under high TX workload.
$ tc -s qd sh dev eth1 handle 1: ; sleep 1; tc -s qd sh dev eth1 handle 1:
qdisc mq 1: root
Sent 43534617319319 bytes 268186451819 pkt (dropped 0, overlimits 0 requeues 3532840114)
backlog 1056Kb 6675p requeues 3532840114
qdisc mq 1: root
Sent 43554665866695 bytes 268309964788 pkt (dropped 0, overlimits 0 requeues 3537737653)
backlog 781164b 4822p requeues 3537737653
This is caused by try_bulk_dequeue_skb() being only limited by BQL budget.
perf record -C120-239 -e qdisc:qdisc_dequeue sleep 1 ; perf script
...
netperf 75332 [146] 2711.138269: qdisc:qdisc_dequeue: dequeue ifindex=5 qdisc handle=0x80150000 parent=0x10013 txq_state=0x0 packets=1292 skbaddr=0xff378005a1e9f200
netperf 75332 [146] 2711.138953: qdisc:qdisc_dequeue: dequeue ifindex=5 qdisc handle=0x80150000 parent=0x10013 txq_state=0x0 packets=1213 skbaddr=0xff378004d607a500
netperf 75330 [144] 2711.139631: qdisc:qdisc_dequeue: dequeue ifindex=5 qdisc handle=0x80150000 parent=0x10013 txq_state=0x0 packets=1233 skbaddr=0xff3780046be20100
netperf 75333 [147] 2711.140356: qdisc:qdisc_dequeue: dequeue ifindex=5 qdisc handle=0x80150000 parent=0x10013 txq_state=0x0 packets=1093 skbaddr=0xff37800514845b00
netperf 75337 [151] 2711.141037: qdisc:qdisc_dequeue: dequeue ifindex=5 qdisc handle=0x80150000 parent=0x10013 txq_state=0x0 packets=1353 skbaddr=0xff37800460753300
netperf 75337 [151] 2711.141877: qdisc:qdisc_dequeue: dequeue ifindex=5 qdisc handle=0x80150000 parent=0x10013 txq_state=0x0 packets=1367 skbaddr=0xff378004e72c7b00
netperf 75330 [144] 2711.142643: qdisc:qdisc_dequeue: dequeue ifindex=5 qdisc handle=0x80150000 parent=0x10013 txq_state=0x0 packets=1202 skbaddr=0xff3780045bd60000
...
This is bad because :
1) Large batches hold one victim cpu for a very long time.
2) Driver often hit their own TX ring limit (all slots are used).
3) We call dev_requeue_skb()
4) Requeues are using a FIFO (q->gso_skb), breaking qdisc ability to
implement FQ or priority scheduling.
5) dequeue_skb() gets packets from q->gso_skb one skb at a time
with no xmit_more support. This is causing many spinlock games
between the qdisc and the device driver.
Requeues were supposed to be very rare, lets keep them this way.
Limit batch sizes to /proc/sys/net/core/dev_weight (default 64) as
__qdisc_run() was designed to use.
Fixes: 5772e9a346 ("qdisc: bulk dequeue support for qdiscs with TCQ_F_ONETXQUEUE")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20251109161215.2574081-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_conn: Fix not cleaning up PA_LINK connections
- hci_event: Fix not handling PA Sync Lost event
- MGMT: cancel mesh send timer when hdev removed
- 6lowpan: reset link-local header on ipv6 recv path
- 6lowpan: fix BDADDR_LE vs ADDR_LE_DEV address type confusion
- L2CAP: export l2cap_chan_hold for modules
- 6lowpan: Don't hold spin lock over sleeping functions
- 6lowpan: add missing l2cap_chan_lock()
- btusb: reorder cleanup in btusb_disconnect to avoid UAF
- btrtl: Avoid loading the config file on security chips
* tag 'for-net-2025-11-11' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btrtl: Avoid loading the config file on security chips
Bluetooth: hci_event: Fix not handling PA Sync Lost event
Bluetooth: hci_conn: Fix not cleaning up PA_LINK connections
Bluetooth: 6lowpan: add missing l2cap_chan_lock()
Bluetooth: 6lowpan: Don't hold spin lock over sleeping functions
Bluetooth: L2CAP: export l2cap_chan_hold for modules
Bluetooth: 6lowpan: fix BDADDR_LE vs ADDR_LE_DEV address type confusion
Bluetooth: 6lowpan: reset link-local header on ipv6 recv path
Bluetooth: btusb: reorder cleanup in btusb_disconnect to avoid UAF
Bluetooth: MGMT: cancel mesh send timer when hdev removed
====================
Link: https://patch.msgid.link/20251111141357.1983153-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This handles PA Sync Lost event which previously was assumed to be
handled with BIG Sync Lost but their lifetime are not the same thus why
there are 2 different events to inform when each sync is lost.
Fixes: b2a5f2e1c1 ("Bluetooth: hci_event: Add support for handling LE BIG Sync Lost event")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Quang Le reported that the AF_UNIX GC could garbage-collect a
receive queue of an alive in-flight socket, with a nice repro.
The repro consists of three stages.
1)
1-a. Create a single cyclic reference with many sockets
1-b. close() all sockets
1-c. Trigger GC
2)
2-a. Pass sk-A to an embryo sk-B
2-b. Pass sk-X to sk-X
2-c. Trigger GC
3)
3-a. accept() the embryo sk-B
3-b. Pass sk-B to sk-C
3-c. close() the in-flight sk-A
3-d. Trigger GC
As of 2-c, sk-A and sk-X are linked to unix_unvisited_vertices,
and unix_walk_scc() groups them into two different SCCs:
unix_sk(sk-A)->vertex->scc_index = 2 (UNIX_VERTEX_INDEX_START)
unix_sk(sk-X)->vertex->scc_index = 3
Once GC completes, unix_graph_grouped is set to true.
Also, unix_graph_maybe_cyclic is set to true due to sk-X's
cyclic self-reference, which makes close() trigger GC.
At 3-b, unix_add_edge() allocates unix_sk(sk-B)->vertex and
links it to unix_unvisited_vertices.
unix_update_graph() is called at 3-a. and 3-b., but neither
unix_graph_grouped nor unix_graph_maybe_cyclic is changed
because both sk-B's listener and sk-C are not in-flight.
3-c decrements sk-A's file refcnt to 1.
Since unix_graph_grouped is true at 3-d, unix_walk_scc_fast()
is finally called and iterates 3 sockets sk-A, sk-B, and sk-X:
sk-A -> sk-B (-> sk-C)
sk-X -> sk-X
This is totally fine. All of them are not yet close()d and
should be grouped into different SCCs.
However, unix_vertex_dead() misjudges that sk-A and sk-B are
in the same SCC and sk-A is dead.
unix_sk(sk-A)->scc_index == unix_sk(sk-B)->scc_index <-- Wrong!
&&
sk-A's file refcnt == unix_sk(sk-A)->vertex->out_degree
^-- 1 in-flight count for sk-B
-> sk-A is dead !?
The problem is that unix_add_edge() does not initialise scc_index.
Stage 1) is used for heap spraying, making a newly allocated
vertex have vertex->scc_index == 2 (UNIX_VERTEX_INDEX_START)
set by unix_walk_scc() at 1-c.
Let's track the max SCC index from the previous unix_walk_scc()
call and assign the max + 1 to a new vertex's scc_index.
This way, we can continue to avoid Tarjan's algorithm while
preventing misjudgments.
Fixes: ad081928a8 ("af_unix: Avoid Tarjan's algorithm if unnecessary.")
Reported-by: Quang Le <quanglex97@gmail.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251109025233.3659187-1-kuniyu@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
commit efa95b01da ("netpoll: fix use after free") incorrectly
ignored the refcount and prematurely set dev->npinfo to NULL during
netpoll cleanup, leading to improper behavior and memory leaks.
Scenario causing lack of proper cleanup:
1) A netpoll is associated with a NIC (e.g., eth0) and netdev->npinfo is
allocated, and refcnt = 1
- Keep in mind that npinfo is shared among all netpoll instances. In
this case, there is just one.
2) Another netpoll is also associated with the same NIC and
npinfo->refcnt += 1.
- Now dev->npinfo->refcnt = 2;
- There is just one npinfo associated to the netdev.
3) When the first netpolls goes to clean up:
- The first cleanup succeeds and clears np->dev->npinfo, ignoring
refcnt.
- It basically calls `RCU_INIT_POINTER(np->dev->npinfo, NULL);`
- Set dev->npinfo = NULL, without proper cleanup
- No ->ndo_netpoll_cleanup() is either called
4) Now the second target tries to clean up
- The second cleanup fails because np->dev->npinfo is already NULL.
* In this case, ops->ndo_netpoll_cleanup() was never called, and
the skb pool is not cleaned as well (for the second netpoll
instance)
- This leaks npinfo and skbpool skbs, which is clearly reported by
kmemleak.
Revert commit efa95b01da ("netpoll: fix use after free") and adds
clarifying comments emphasizing that npinfo cleanup should only happen
once the refcount reaches zero, ensuring stable and correct netpoll
behavior.
Cc: <stable@vger.kernel.org> # 3.17.x
Cc: Jay Vosburgh <jv@jvosburgh.net>
Fixes: efa95b01da ("netpoll: fix use after free")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251107-netconsole_torture-v10-1-749227b55f63@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In tls_handshake_accept(), a netlink message is allocated using
genlmsg_new(). In the error handling path, genlmsg_cancel() is called
to cancel the message construction, but the message itself is not freed.
This leads to a memory leak.
Fix this by calling nlmsg_free() in the error path after genlmsg_cancel()
to release the allocated memory.
Fixes: 2fd5532044 ("net/handshake: Add a kernel API for requesting a TLSv1.3 handshake")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20251106144511.3859535-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current CLC proposal message construction uses a mix of
`ini->smc_type_v1/v2` and `pclc_base->hdr.typev1/v2` to decide whether
to include optional extensions (IPv6 prefix extension for v1, and v2
extension). This leads to a critical inconsistency: when
`smc_clc_prfx_set()` fails - for example, in IPv6-only environments with
only link-local addresses, or when the local IP address and the outgoing
interface’s network address are not in the same subnet.
As a result, the proposal message is assembled using the stale
`ini->smc_type_v1` value—causing the IPv6 prefix extension to be
included even though the header indicates v1 is not supported.
The peer then receives a malformed CLC proposal where the header type
does not match the payload, and immediately resets the connection.
The fix ensures consistency between the CLC header flags and the actual
payload by synchronizing `ini->smc_type_v1` with `pclc_base->hdr.typev1`
when prefix setup fails.
Fixes: 8c3dca341a ("net/smc: build and send V2 CLC proposal")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20251107024029.88753-1-alibuda@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Broadcom switches locally terminate link local traffic and do not
forward it, so we should not mark it as offloaded.
In some situations we still want/need to flood this traffic, e.g. if STP
is disabled, or it is explicitly enabled via the group_fwd_mask. But if
the skb is marked as offloaded, the kernel will assume this was already
done in hardware, and the packets never reach other bridge ports.
So ensure that link local traffic is never marked as offloaded, so that
the kernel can forward/flood these packets in software if needed.
Since the local termination in not configurable, check the destination
MAC, and never mark packets as offloaded if it is a link local ether
address.
While modern switches set the tag reason code to BRCM_EG_RC_PROT_TERM
for trapped link local traffic, they also set it for link local traffic
that is flooded (01:80:c2:00:00:10 to 01:80:c2:00:00:2f), so we cannot
use it and need to look at the destination address for them as well.
Fixes: 964dbf186e ("net: dsa: tag_brcm: add support for legacy tags")
Fixes: 0e62f543be ("net: dsa: Fix duplicate frames flooded by learning")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251109134635.243951-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported a possible shift-out-of-bounds [1]
Blamed commit added rto_alpha_max and rto_beta_max set to 1000.
It is unclear if some sctp users are setting very large rto_alpha
and/or rto_beta.
In order to prevent user regression, perform the test at run time.
Also add READ_ONCE() annotations as sysctl values can change under us.
[1]
UBSAN: shift-out-of-bounds in net/sctp/transport.c:509:41
shift exponent 64 is too large for 32-bit type 'unsigned int'
CPU: 0 UID: 0 PID: 16704 Comm: syz.2.2320 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/02/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:233 [inline]
__ubsan_handle_shift_out_of_bounds+0x27f/0x420 lib/ubsan.c:494
sctp_transport_update_rto.cold+0x1c/0x34b net/sctp/transport.c:509
sctp_check_transmitted+0x11c4/0x1c30 net/sctp/outqueue.c:1502
sctp_outq_sack+0x4ef/0x1b20 net/sctp/outqueue.c:1338
sctp_cmd_process_sack net/sctp/sm_sideeffect.c:840 [inline]
sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1372 [inline]
Fixes: b58537a1f5 ("net: sctp: fix permissions for rto_alpha and rto_beta knobs")
Reported-by: syzbot+f8c46c8b2b7f6e076e99@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/690c81ae.050a0220.3d0d33.014e.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20251106111054.3288127-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Contrary to what was stated on d36349ea73 ("Bluetooth: hci_conn:
Fix running bis_cleanup for hci_conn->type PA_LINK") the PA_LINK does
in fact needs to run bis_cleanup in order to terminate the PA Sync,
since that is bond to the listening socket which is the entity that
controls the lifetime of PA Sync, so if it is closed/released the PA
Sync shall be terminated, terminating the PA Sync shall not result in
the BIG Sync being terminated since once the later is established it
doesn't depend on the former anymore.
If the use user wants to reconnect/rebind a number of BIS(s) it shall
keep the socket open until it no longer needs the PA Sync, which means
it retains full control of the lifetime of both PA and BIG Syncs.
Fixes: d36349ea73 ("Bluetooth: hci_conn: Fix running bis_cleanup for hci_conn->type PA_LINK")
Fixes: a7bcffc673 ("Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_chan_close() needs to be called in l2cap_chan_lock(), otherwise
l2cap_le_sig_cmd() etc. may run concurrently.
Add missing locks around l2cap_chan_close().
Fixes: 6b8d4a6a03 ("Bluetooth: 6LoWPAN: Use connected oriented channel instead of fixed one")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
disconnect_all_peers() calls sleeping function (l2cap_chan_close) under
spinlock. Holding the lock doesn't actually do any good -- we work on a
local copy of the list, and the lock doesn't protect against peer->chan
having already been freed.
Fix by taking refcounts of peer->chan instead. Clean up the code and
old comments a bit.
Take devices_lock instead of RCU, because the kfree_rcu();
l2cap_chan_put(); construct in chan_close_cb() does not guarantee
peer->chan is necessarily valid in RCU.
Also take l2cap_chan_lock() which is required for l2cap_chan_close().
Log: (bluez 6lowpan-tester Client Connect - Disable)
------
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:575
...
<TASK>
...
l2cap_send_disconn_req (net/bluetooth/l2cap_core.c:938 net/bluetooth/l2cap_core.c:1495)
...
? __pfx_l2cap_chan_close (net/bluetooth/l2cap_core.c:809)
do_enable_set (net/bluetooth/6lowpan.c:1048 net/bluetooth/6lowpan.c:1068)
------
Fixes: 9030582963 ("Bluetooth: 6lowpan: Converting rwlocks to use RCU")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_chan_put() is exported, so export also l2cap_chan_hold() for
modules.
l2cap_chan_hold() has use case in net/bluetooth/6lowpan.c
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth 6lowpan.c confuses BDADDR_LE and ADDR_LE_DEV address types,
e.g. debugfs "connect" command takes the former, and "disconnect" and
"connect" to already connected device take the latter. This is due to
using same value both for l2cap_chan_connect and hci_conn_hash_lookup_le
which take different dst_type values.
Fix address type passed to hci_conn_hash_lookup_le().
Retain the debugfs API difference between "connect" and "disconnect"
commands since it's been like this since 2015 and nobody apparently
complained.
Fixes: f5ad4ffceb ("Bluetooth: 6lowpan: Use hci_conn_hash_lookup_le() when possible")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth 6lowpan.c netdev has header_ops, so it must set link-local
header for RX skb, otherwise things crash, eg. with AF_PACKET SOCK_RAW
Add missing skb_reset_mac_header() for uncompressed ipv6 RX path.
For the compressed one, it is done in lowpan_header_decompress().
Log: (BlueZ 6lowpan-tester Client Recv Raw - Success)
------
kernel BUG at net/core/skbuff.c:212!
Call Trace:
<IRQ>
...
packet_rcv (net/packet/af_packet.c:2152)
...
<TASK>
__local_bh_enable_ip (kernel/softirq.c:407)
netif_rx (net/core/dev.c:5648)
chan_recv_cb (net/bluetooth/6lowpan.c:294 net/bluetooth/6lowpan.c:359)
------
Fixes: 18722c2470 ("Bluetooth: Enable 6LoWPAN support for BT LE devices")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
mesh_send_done timer is not canceled when hdev is removed, which causes
crash if the timer triggers after hdev is gone.
Cancel the timer when MGMT removes the hdev, like other MGMT timers.
Should fix the BUG: sporadically seen by BlueZ test bot
(in "Mesh - Send cancel - 1" test).
Log:
------
BUG: KASAN: slab-use-after-free in run_timer_softirq+0x76b/0x7d0
...
Freed by task 36:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_save_free_info+0x3a/0x60
__kasan_slab_free+0x43/0x70
kfree+0x103/0x500
device_release+0x9a/0x210
kobject_put+0x100/0x1e0
vhci_release+0x18b/0x240
------
Fixes: b338d91703 ("Bluetooth: Implement support for Mesh")
Link: https://lore.kernel.org/linux-bluetooth/67364c09.0c0a0220.113cba.39ff@mx.google.com/
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The `len` member of the sk_buff is an unsigned int. This is cast to
`ssize_t` (a signed type) for the first sk_buff in the comparison,
but not the second sk_buff. On 32-bit systems, this can result in
an integer underflow for certain values because unsigned arithmetic
is being used.
This appears to be an oversight: if the intention was to use unsigned
arithmetic, then the first cast would have been omitted. The change
ensures both len values are cast to `ssize_t`.
The underflow causes an issue with ktls when multiple TLS PDUs are
included in a single TCP segment. The mainline kernel does not use
strparser for ktls anymore, but this is still useful for other
features that still use strparser, and for backporting.
Signed-off-by: Nate Karstens <nate.karstens@garmin.com>
Cc: stable@vger.kernel.org
Fixes: 43a0c6751a ("strparser: Stream parser for messages")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20251106222835.1871628-1-nate.karstens@garmin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While connecting, the MAC address can already no longer be
changed. The change is already rejected if netif_carrier_ok(),
but of course that's not true yet while connecting. Check for
auth_data or assoc_data, so the MAC address cannot be changed.
Also more comprehensively check that there are no stations on
the interface being changed - if any peer station is added it
will know about our address already, so we cannot change it.
Cc: stable@vger.kernel.org
Fixes: 3c06e91b40 ("wifi: mac80211: Support POWERED_ADDR_CHANGE feature")
Link: https://patch.msgid.link/20251105154119.f9f6c1df81bb.I9bb3760ede650fb96588be0d09a5a7bdec21b217@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pull networking fixes from Jakub Kicinski:
Including fixes from bluetooth and wireless.
Current release - new code bugs:
- ptp: expose raw cycles only for clocks with free-running counter
- bonding: fix null-deref in actor_port_prio setting
- mdio: ERR_PTR-check regmap pointer returned by
device_node_to_regmap()
- eth: libie: depend on DEBUG_FS when building LIBIE_FWLOG
Previous releases - regressions:
- virtio_net: fix perf regression due to bad alignment of
virtio_net_hdr_v1_hash
- Revert "wifi: ath10k: avoid unnecessary wait for service ready
message" caused regressions for QCA988x and QCA9984
- Revert "wifi: ath12k: Fix missing station power save configuration"
caused regressions for WCN7850
- eth: bnxt_en: shutdown FW DMA in bnxt_shutdown(), fix memory
corruptions after kexec
Previous releases - always broken:
- virtio-net: fix received packet length check for big packets
- sctp: fix races in socket diag handling
- wifi: add an hrtimer-based delayed work item to avoid low
granularity of timers set relatively far in the future, and use it
where it matters (e.g. when performing AP-scheduled channel switch)
- eth: mlx5e:
- correctly propagate error in case of module EEPROM read failure
- fix HW-GRO on systems with PAGE_SIZE == 64kB
- dsa: b53: fixes for tagging, link configuration / RMII, FDB,
multicast
- phy: lan8842: implement latest errata"
* tag 'net-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
selftests/vsock: avoid false-positives when checking dmesg
net: bridge: fix MST static key usage
net: bridge: fix use-after-free due to MST port state bypass
lan966x: Fix sleeping in atomic context
bonding: fix NULL pointer dereference in actor_port_prio setting
net: dsa: microchip: Fix reserved multicast address table programming
net: wan: framer: pef2256: Switch to devm_mfd_add_devices()
net: libwx: fix device bus LAN ID
net/mlx5e: SHAMPO, Fix header formulas for higher MTUs and 64K pages
net/mlx5e: SHAMPO, Fix skb size check for 64K pages
net/mlx5e: SHAMPO, Fix header mapping for 64K pages
net: ti: icssg-prueth: Fix fdb hash size configuration
net/mlx5e: Fix return value in case of module EEPROM read error
net: gro_cells: Reduce lock scope in gro_cell_poll
libie: depend on DEBUG_FS when building LIBIE_FWLOG
wifi: mac80211_hwsim: Limit destroy_on_close radio removal to netgroup
netpoll: Fix deadlock in memory allocation under spinlock
net: ethernet: ti: netcp: Standardize knav_dma_open_channel to return NULL on error
virtio-net: fix received length check in big packets
bnxt_en: Fix warning in bnxt_dl_reload_down()
...
syzbot reported[1] a use-after-free when deleting an expired fdb. It is
due to a race condition between learning still happening and a port being
deleted, after all its fdbs have been flushed. The port's state has been
toggled to disabled so no learning should happen at that time, but if we
have MST enabled, it will bypass the port's state, that together with VLAN
filtering disabled can lead to fdb learning at a time when it shouldn't
happen while the port is being deleted. VLAN filtering must be disabled
because we flush the port VLANs when it's being deleted which will stop
learning. This fix adds a check for the port's vlan group which is
initialized to NULL when the port is getting deleted, that avoids the port
state bypass. When MST is enabled there would be a minimal new overhead
in the fast-path because the port's vlan group pointer is cache-hot.
[1] https://syzkaller.appspot.com/bug?extid=dd280197f0f7ab3917be
Fixes: ec7328b591 ("net: bridge: mst: Multiple Spanning Tree (MST) mode")
Reported-by: syzbot+dd280197f0f7ab3917be@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/69088ffa.050a0220.29fc44.003d.GAE@google.com/
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251105111919.1499702-2-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
One GRO-cell device's NAPI callback can nest into the GRO-cell of
another device if the underlying device is also using GRO-cell.
This is the case for IPsec over vxlan.
These two GRO-cells are separate devices. From lockdep's point of view
it is the same because each device is sharing the same lock class and so
it reports a possible deadlock assuming one device is nesting into
itself.
Hold the bh_lock only while accessing gro_cell::napi_skbs in
gro_cell_poll(). This reduces the locking scope and avoids acquiring the
same lock class multiple times.
Fixes: 25718fdcbd ("net: gro_cells: Use nested-BH locking for gro_cell")
Reported-by: Gal Pressman <gal@nvidia.com>
Closes: https://lore.kernel.org/all/66664116-edb8-48dc-ad72-d5223696dd19@nvidia.com/
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20251104153435.ty88xDQt@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a AA deadlock in refill_skbs() where memory allocation while holding
skb_pool->lock can trigger a recursive lock acquisition attempt.
The deadlock scenario occurs when the system is under severe memory
pressure:
1. refill_skbs() acquires skb_pool->lock (spinlock)
2. alloc_skb() is called while holding the lock
3. Memory allocator fails and calls slab_out_of_memory()
4. This triggers printk() for the OOM warning
5. The console output path calls netpoll_send_udp()
6. netpoll_send_udp() attempts to acquire the same skb_pool->lock
7. Deadlock: the lock is already held by the same CPU
Call stack:
refill_skbs()
spin_lock_irqsave(&skb_pool->lock) <- lock acquired
__alloc_skb()
kmem_cache_alloc_node_noprof()
slab_out_of_memory()
printk()
console_flush_all()
netpoll_send_udp()
skb_dequeue()
spin_lock_irqsave(&skb_pool->lock) <- deadlock attempt
This bug was exposed by commit 248f6571fd ("netpoll: Optimize skb
refilling on critical path") which removed refill_skbs() from the
critical path (where nested printk was being deferred), letting nested
printk being called from inside refill_skbs()
Refactor refill_skbs() to never allocate memory while holding
the spinlock.
Another possible solution to fix this problem is protecting the
refill_skbs() from nested printks, basically calling
printk_deferred_{enter,exit}() in refill_skbs(), then, any nested
pr_warn() would be deferred.
I prefer this approach, given I _think_ it might be a good idea to move
the alloc_skb() from GFP_ATOMIC to GFP_KERNEL in the future, so, having
the alloc_skb() outside of the lock will be necessary step.
There is a possible TOCTOU issue when checking for the pool length, and
queueing the new allocated skb, but, this is not an issue, given that
an extra SKB in the pool is harmless and it will be eventually used.
Signed-off-by: Breno Leitao <leitao@debian.org>
Fixes: 248f6571fd ("netpoll: Optimize skb refilling on critical path")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251103-fix_netpoll_aa-v4-1-4cfecdf6da7c@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull bpf fixes from Alexei Starovoitov:
- Mark migrate_disable/enable() as always_inline to avoid issues with
partial inlining (Yonghong Song)
- Fix powerpc stack register definition in libbpf bpf_tracing.h (Andrii
Nakryiko)
- Reject negative head_room in __bpf_skb_change_head (Daniel Borkmann)
- Conditionally include dynptr copy kfuncs (Malin Jonsson)
- Sync pending IRQ work before freeing BPF ring buffer (Noorain Eqbal)
- Do not audit capability check in x86 do_jit() (Ondrej Mosnacek)
- Fix arm64 JIT of BPF_ST insn when it writes into arena memory
(Puranjay Mohan)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf/arm64: Fix BPF_ST into arena memory
bpf: Make migrate_disable always inline to avoid partial inlining
bpf: Reject negative head_room in __bpf_skb_change_head
bpf: Conditionally include dynptr copy kfuncs
libbpf: Fix powerpc's stack register definition in bpf_tracing.h
bpf: Do not audit capability check in do_jit()
bpf: Sync pending IRQ work before freeing ring buffer
After registering a VLAN device and setting its feature flags, we need to
synchronize the VLAN features with the lower device. For example, the VLAN
device does not have the NETIF_F_LRO flag, it should be synchronized with
the lower device based on the NETIF_F_UPPER_DISABLES definition.
As the dev->vlan_features has changed, we need to call
netdev_update_features(). The caller must run after netdev_upper_dev_link()
links the lower devices, so this patch adds the netdev_update_features()
call in register_vlan_dev().
Fixes: fd867d51f8 ("net/core: generic support for disabling netdev features down stack")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251030073539.133779-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The internal switch on BCM63XX SoCs will unconditionally add 802.1Q VLAN
tags on egress to CPU when 802.1Q mode is enabled. We do this
unconditionally since commit ed409f3bba ("net: dsa: b53: Configure
VLANs while not filtering").
This is fine for VLAN aware bridges, but for standalone ports and vlan
unaware bridges this means all packets are tagged with the default VID,
which is 0.
While the kernel will treat that like untagged, this can break userspace
applications processing raw packets, expecting untagged traffic, like
STP daemons.
This also breaks several bridge tests, where the tcpdump output then
does not match the expected output anymore.
Since 0 isn't a valid VID, just strip out the VLAN tag if we encounter
it, unless the priority field is set, since that would be a valid tag
again.
Fixes: 964dbf186e ("net: dsa: tag_brcm: add support for legacy tags")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20251027194621.133301-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- btrtl: Fix memory leak in rtlbt_parse_firmware_v2()
- MGMT: Fix OOB access in parse_adv_monitor_pattern()
- hci_event: validate skb length for unknown CC opcode
* tag 'for-net-2025-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Fix OOB access in parse_adv_monitor_pattern()
Bluetooth: btrtl: Fix memory leak in rtlbt_parse_firmware_v2()
Bluetooth: hci_event: validate skb length for unknown CC opcode
====================
Link: https://patch.msgid.link/20251031170959.590470-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johannes Berg says:
====================
Couple of new fixes:
- ath10k: revert a patch that had caused issues on some devices
- cfg80211/mac80211: use hrtimers for some things where the
precise timing matters
- zd1211rw: fix a long-standing potential leak
* tag 'wireless-2025-10-30' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: zd1211rw: fix potential memory leak in __zd_usb_enable_rx()
wifi: mac80211: use wiphy_hrtimer_work for csa.switch_work
wifi: mac80211: use wiphy_hrtimer_work for ml_reconf_work
wifi: mac80211: use wiphy_hrtimer_work for ttlm_work
wifi: cfg80211: add an hrtimer based delayed work item
Revert "wifi: ath10k: avoid unnecessary wait for service ready message"
====================
Link: https://patch.msgid.link/20251030104919.12871-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the parse_adv_monitor_pattern() function, the value of
the 'length' variable is currently limited to HCI_MAX_EXT_AD_LENGTH(251).
The size of the 'value' array in the mgmt_adv_pattern structure is 31.
If the value of 'pattern[i].length' is set in the user space
and exceeds 31, the 'patterns[i].value' array can be accessed
out of bound when copied.
Increasing the size of the 'value' array in
the 'mgmt_adv_pattern' structure will break the userspace.
Considering this, and to avoid OOB access revert the limits for 'offset'
and 'length' back to the value of HCI_MAX_AD_LENGTH.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: db08722fc7 ("Bluetooth: hci_core: Fix missing instances using HCI_MAX_AD_LENGTH")
Cc: stable@vger.kernel.org
Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
