Implement function kvm_para_has_feature() to detect supported paravirt
features. It can be used by device driver to detect and enable paravirt
features, such as the EIOINTC irqchip driver is able to detect feature
KVM_FEATURE_VIRT_EXTIOI and do some optimization.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The blk_add_partition() function initially used a single if-condition
(IS_ERR(part)) to check for errors when adding a partition. This was
modified to handle the specific case of -ENXIO separately, allowing the
function to proceed without logging the error in this case. However,
this change unintentionally left a path where md_autodetect_dev()
could be called without confirming that part is a valid pointer.
This commit separates the error handling logic by splitting the
initial if-condition, improving code readability and handling specific
error scenarios explicitly. The function now distinguishes the general
error case from -ENXIO without altering the existing behavior of
md_autodetect_dev() calls.
Fixes: b72053072c (block: allow partitions on host aware zone devices)
Signed-off-by: Riyan Dhiman <riyandhiman14@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240911132954.5874-1-riyandhiman14@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains two fixes from Florian Westphal:
Patch #1 fixes a sk refcount leak in nft_socket on mismatch.
Patch #2 fixes cgroupsv2 matching from containers due to incorrect
level in subtree.
netfilter pull request 24-09-12
* tag 'nf-24-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_socket: make cgroupsv2 matching work with namespaces
netfilter: nft_socket: fix sk refcount leaks
====================
Link: https://patch.msgid.link/20240911222520.3606-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Export kernel paravirt features to user space, so that VMM can control
each single paravirt feature. By default paravirt features will be the
same with kvm supported features if VMM does not set it.
Also a new feature KVM_FEATURE_VIRT_EXTIOI is added which can be set
from user space. This feature indicates that the virt EIOINTC can route
interrupts to 256 vCPUs, rather than 4 vCPUs like with real HW.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
On LoongArch, the host and guest have their own PMU CSRs registers and
they share PMU hardware resources. A set of PMU CSRs consists of a CTRL
register and a CNTR register. We can set which PMU CSRs are used by the
guest by writing to the GCFG register [24:26] bits.
On KVM side:
- Save the host PMU CSRs into structure kvm_context.
- If the host supports the PMU feature.
- When entering guest mode, save the host PMU CSRs and restore the guest PMU CSRs.
- When exiting guest mode, save the guest PMU CSRs and restore the host PMU CSRs.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
25216afc9d ("PCI: Add managed pcim_intx()") moved the allocation step for
pci_intx()'s device resource from pcim_enable_device() to pcim_intx(). As
before, pcim_enable_device() sets pci_dev.is_managed to true; and it is
never set to false again.
Due to the lifecycle of a struct pci_dev, it can happen that a second
driver obtains the same pci_dev after a first driver ran. If one driver
uses pcim_enable_device() and the other doesn't, this causes the other
driver to run into managed pcim_intx(), which will try to allocate when
called for the first time.
Allocations might sleep, so calling pci_intx() while holding spinlocks
becomes then invalid, which causes lockdep warnings and could cause
deadlocks:
========================================================
WARNING: possible irq lock inversion dependency detected
6.11.0-rc6+ #59 Tainted: G W
--------------------------------------------------------
CPU 0/KVM/1537 just changed the state of lock:
ffffa0f0cff965f0 (&vdev->irqlock){-...}-{2:2}, at:
vfio_intx_handler+0x21/0xd0 [vfio_pci_core] but this lock took another,
HARDIRQ-unsafe lock in the past: (fs_reclaim){+.+.}-{0:0}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
local_irq_disable();
lock(&vdev->irqlock);
lock(fs_reclaim);
<Interrupt>
lock(&vdev->irqlock);
*** DEADLOCK ***
Have pcim_enable_device()'s release function, pcim_disable_device(), set
pci_dev.is_managed to false so that subsequent drivers using the same
struct pci_dev do not implicitly run into managed code.
Link: https://lore.kernel.org/r/20240905072556.11375-2-pstanner@redhat.com
Fixes: 25216afc9d ("PCI: Add managed pcim_intx()")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Closes: https://lore.kernel.org/all/20240903094431.63551744.alex.williamson@redhat.com/
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
* for-next/selftests:
kselftest/arm64: Fix build warnings for ptrace
kselftest/arm64: Actually test SME vector length changes via sigreturn
kselftest/arm64: signal: fix/refactor SVE vector length enumeration
* for-next/poe: (31 commits)
arm64: pkeys: remove redundant WARN
kselftest/arm64: Add test case for POR_EL0 signal frame records
kselftest/arm64: parse POE_MAGIC in a signal frame
kselftest/arm64: add HWCAP test for FEAT_S1POE
selftests: mm: make protection_keys test work on arm64
selftests: mm: move fpregs printing
kselftest/arm64: move get_header()
arm64: add Permission Overlay Extension Kconfig
arm64: enable PKEY support for CPUs with S1POE
arm64: enable POE and PIE to coexist
arm64/ptrace: add support for FEAT_POE
arm64: add POE signal support
arm64: implement PKEYS support
arm64: add pte_access_permitted_no_overlay()
arm64: handle PKEY/POE faults
arm64: mask out POIndex when modifying a PTE
arm64: convert protection key into vm_flags and pgprot values
arm64: add POIndex defines
arm64: re-order MTE VM_ flags
arm64: enable the Permission Overlay Extension for EL0
...
* for-next/pkvm-guest:
arm64: smccc: Reserve block of KVM "vendor" services for pKVM hypercalls
drivers/virt: pkvm: Intercept ioremap using pKVM MMIO_GUARD hypercall
arm64: mm: Add confidential computing hook to ioremap_prot()
drivers/virt: pkvm: Hook up mem_encrypt API using pKVM hypercalls
arm64: mm: Add top-level dispatcher for internal mem_encrypt API
drivers/virt: pkvm: Add initial support for running as a protected guest
firmware/smccc: Call arch-specific hook on discovering KVM services
* for-next/mm:
arm64/mm: use lm_alias() with addresses passed to memblock_free()
mm: arm64: document why pte is not advanced in contpte_ptep_set_access_flags()
arm64: Expose the end of the linear map in PHYSMEM_END
arm64: trans_pgd: mark PTEs entries as valid to avoid dead kexec()
arm64/mm: Delete __init region from memblock.reserved
* for-next/misc:
arm64: hibernate: Fix warning for cast from restricted gfp_t
arm64: esr: Define ESR_ELx_EC_* constants as UL
arm64: Constify struct kobj_type
arm64: smp: smp_send_stop() and crash_smp_send_stop() should try non-NMI first
arm64/sve: Remove unused declaration read_smcr_features()
arm64: mm: Remove unused declaration early_io_map()
arm64: el2_setup.h: Rename some labels to be more diff-friendly
arm64: signal: Fix some under-bracketed UAPI macros
arm64/mm: Drop TCR_SMP_FLAGS
arm64/mm: Drop PMD_SECT_VALID
* for-next/acpi:
ACPI/IORT: Add PMCG platform information for HiSilicon HIP10/11
ACPI: ARM64: add acpi_iort.h to MAINTAINERS
ACPI/IORT: Switch to use kmemdup_array()
With iterative development, our codebase can now deal with compressed
buffer misses properly if both in-place I/O and compressed buffer
allocation fail.
Note that if readahead fails (with non-uptodate folios), the original
request will then fall back to synchronous read, and `.read_folio()`
should return appropriate errnos; otherwise -EIO will be passed to
user space, which is unexpected.
To simplify rarely encountered failure paths, a mimic decompression
will be just used. Before that, failure reasons are recorded in
compressed_bvecs[] and they also act as placeholders to avoid in-place
pages. They will be parsed just before decompression and then pass
back to `.read_folio()`.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240905084732.2684515-1-hsiangkao@linux.alibaba.com
i2c-hid uses 2 shared buffers: command and "raw" input buffer for
sending requests to peripherals and read data from peripherals when
executing variety of commands. Such commands include reading of HID
registers, requesting particular power mode, getting and setting
reports and so on. Because all such requests use the same 2 buffers
they should not execute simultaneously.
Fix this by introducing "cmd_lock" mutex and acquire it whenever
we needs to access ihid->cmdbuf or idid->rawbuf.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Use devm_pm_runtime_enable(), devm_request_irq() and
devm_spi_register_controller() to simplify code.
And also register a callback spi_geni_release_dma_chan() with
devm_add_action_or_reset(), to release dma channel in both error
and device detach path, which can make sure the release sequence is
consistent with the original one.
1. Unregister spi controller.
2. Free the IRQ.
3. Free DMA chans
4. Disable runtime PM.
So the remove function can also be removed.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Suggested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240912091701.3720857-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Andrei Simion <andrei.simion@microchip.com>:
This patch set is intended to enhance the functionality and maintainability
of the mchp-pdmc driver:
- Enhances performance by refining maxburst logic.
- Introduces a name for better identification and management.
Merge patch series "netfs: Read/write improvements" from David Howells
<dhowells@redhat.com>.
* 'netfs-writeback' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (25 commits)
cifs: Don't support ITER_XARRAY
cifs: Switch crypto buffer to use a folio_queue rather than an xarray
cifs: Use iterate_and_advance*() routines directly for hashing
netfs: Cancel dirty folios that have no storage destination
cachefiles, netfs: Fix write to partial block at EOF
netfs: Remove fs/netfs/io.c
netfs: Speed up buffered reading
afs: Make read subreqs async
netfs: Simplify the writeback code
netfs: Provide an iterator-reset function
netfs: Use new folio_queue data type and iterator instead of xarray iter
cifs: Provide the capability to extract from ITER_FOLIOQ to RDMA SGEs
iov_iter: Provide copy_folio_from_iter()
mm: Define struct folio_queue and ITER_FOLIOQ to handle a sequence of folios
netfs: Use bh-disabling spinlocks for rreq->lock
netfs: Set the request work function upon allocation
netfs: Remove NETFS_COPY_TO_CACHE
netfs: Reserve netfs_sreq_source 0 as unset/unknown
netfs: Move max_len/max_nr_segs from netfs_io_subrequest to netfs_io_stream
netfs, cifs: Move CIFS_INO_MODIFIED_ATTR to netfs_inode
...
Signed-off-by: Christian Brauner <brauner@kernel.org>
Kafs wants to be able to cache the contents of directories (and symlinks),
but whilst these are downloaded from the server with the FS.FetchData RPC
op and similar, the same as for regular files, they can't be updated by
FS.StoreData, but rather have special operations (FS.MakeDir, etc.).
Now, rather than redownloading a directory's content after each change made
to that directory, kafs modifies the local blob. This blob can be saved
out to the cache, and since it's using netfslib, kafs just marks the folios
dirty and lets ->writepages() on the directory take care of it, as for an
regular file.
This is fine as long as there's a cache as although the upload stream is
disabled, there's a cache stream to drive the procedure. But if the cache
goes away in the meantime, suddenly there's no way do any writes and the
code gets confused, complains "R=%x: No submit" to dmesg and leaves the
dirty folio hanging.
Fix this by just cancelling the store of the folio if neither stream is
active. (If there's no cache at the time of dirtying, we should just not
mark the folio dirty).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-23-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
Because it uses DIO writes, cachefiles is unable to make a write to the
backing file if that write is not aligned to and sized according to the
backing file's DIO block alignment. This makes it tricky to handle a write
to the cache where the EOF on the network file is not correctly aligned.
To get around this, netfslib attempts to tell the driver it is calling how
much more data there is available beyond the EOF that it can use to pad the
write (netfslib preclears the part of the folio above the EOF). However,
it tries to tell the cache what the maximum length is, but doesn't
calculate this correctly; and, in any case, cachefiles actually ignores the
value and just skips the block.
Fix this by:
(1) Change the value passed to indicate the amount of extra data that can
be added to the operation (now ->submit_extendable_to). This is much
simpler to calculate as it's just the end of the folio minus the top
of the data within the folio - rather than having to account for data
spread over multiple folios.
(2) Make cachefiles add some of this data if the subrequest it is given
ends at the network file's i_size if the extra data is sufficient to
pad out to a whole block.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-22-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
