Pull SoC devicetree updates from Arnd Bergmann:
"New SoC support for Broadcom bcm2712 (Raspberry Pi 5) and Renesas
R9A09G057 (RZ/V2H(P)) and Qualcomm Snapdragon 414 (MSM8929), all three
of these are variants of already supported chips, in particular the
last one is almost identical to MSM8939.
Lots of updates to Mediatek, ASpeed, Rockchips, Amlogic, Qualcomm,
STM32, NXP i.MX, Sophgo, TI K3, Renesas, Microchip at91, NVIDIA Tegra,
and T-HEAD.
The added Qualcomm platform support once again dominates the changes,
with seven phones and three laptops getting added in addition to many
new features on existing machines. The Snapdragon X1E support
specifically keeps improving.
The other new machines are:
- eight new machines using various 64-bit Rockchips SoCs, both on the
consumer/gaming side and developer boards
- three industrial boards with 64-bit i.MX, which is a very low
number for them.
- four more servers using a 32-bit Speed BMC
- three boards using STM32MP1 SoCs
- one new machine each using allwinner, amlogic, broadcom and renesas
chips"
* tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (672 commits)
arm64: dts: allwinner: h5: NanoPi NEO Plus2: Use regulators for pio
arm64: dts: mediatek: add audio support for mt8365-evk
arm64: dts: mediatek: add afe support for mt8365 SoC
arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface
arm64: dts: mediatek: mt8186: Add svs node
arm64: dts: mediatek: mt8186: Add power domain for DPI
arm64: dts: mediatek: mt8195: Correct clock order for dp_intf*
arm64: dts: mt8183: add dpi node to mt8183
arm64: dts: allwinner: h5: NanoPi Neo Plus2: Fix regulators
arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board
arm64: dts: rockchip: add CAN-FD controller nodes to rk3568
arm64: dts: nuvoton: ma35d1: Add uart pinctrl settings
arm64: dts: nuvoton: ma35d1: Add pinctrl and gpio nodes
arm64: dts: nuvoton: Add syscon to the system-management node
ARM: dts: Fix undocumented LM75 compatible nodes
arm64: dts: toshiba: Fix pl011 and pl022 clocks
ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Add MECIO1 and MECT1S board variants
...
This pull request contains Broadcom ARM64 SoCs Device Tree changes for
6.12, please pull the following:
- Andrea adds a minimal Device Tree for the Raspberry Pi 5 (2712)
- Stefan adjusts the bcm2837/bcm2712 bcm2836-l1-intc node name to
conform to the binding changes
* tag 'arm-soc/for-6.12/devicetree-arm64' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2837/bcm2712: adjust local intc node names
arm64: dts: broadcom: Add minimal support for Raspberry Pi 5
Link: https://lore.kernel.org/r/20240906180643.2275460-2-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
mt63xx:
- add ADC node to the different PMICs
mt7981:
- Add SPI controller nodes.
mt8183:
- use referenced label for DSI endpoint.
- disable soc_data efuse node, which does not has any cell definde
(kukui).
- fix the regulator tree (kukui).
- fix potential deadlock by removing not needed clock in the MFG async
power domain.
- add DPI node.
mt8186:
- fix opp-supported-hw mask for GPU.
- add lvts thermal sensor node.
- add thermal zones.
- fix reserved memory region of ADSP firmware (corsola).
- add power domain to DPI node.
- add SVS node.
- fix internal display by disabling the external display temporarily
(corsola).
mt8188:
- add thermal sensor for the AP.
- add thermal zones.
mt8195:
- fix pull resistance for hdmi pins (cherry).
- remove keyboard backlight node (cherry), this is detected through
ChromeOS EC communication.
- fix warning in mdp3 driver by providing a phandel to the SCP.
- fix probe error of the USB controller by disabeling USB3 on the
controller (cherry).
- assign per default both phys to the USB controller (cherry).
- fix binding validation by re-ordering the dp_intf clocks.
mt8365:
- add AFE audio controller.
- add AFE and audio codec support (evk).
mt8395:
- fix probe error of the USB controller by disabeling USB3 on the
controller (radax-nio-12l).
- assign per default both phys to the USB controller (genio, kontron,
radax).
* tag 'v6.11-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (25 commits)
arm64: dts: mediatek: add audio support for mt8365-evk
arm64: dts: mediatek: add afe support for mt8365 SoC
arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface
arm64: dts: mediatek: mt8186: Add svs node
arm64: dts: mediatek: mt8186: Add power domain for DPI
arm64: dts: mediatek: mt8195: Correct clock order for dp_intf*
arm64: dts: mt8183: add dpi node to mt8183
arm64: dts: mediatek: mt8186-corsola: Update ADSP reserved memory region
arm64: dts: mediatek: mt8183: Remove clock from mfg_async power domain
arm64: dts: mt8183-kukui: clean up regulator tree
arm64: dts: mediatek: mt7981: add SPI controllers
arm64: dts: mediatek: mt8183-kukui: Disable unused efuse at 8000000
arm64: dts: mediatek: mt8188: add default thermal zones
arm64: dts: mediatek: mt8188: add lvts definitions
arm64: dts: mediatek: mt8186: add default thermal zones
arm64: dts: mediatek: mt8186: add lvts definitions
arm64: dts: mediatek: mt8195: Assign USB 3.0 PHY to xhci1 by default
arm64: dts: mediatek: mt8395-nio-12l: Mark USB 3.0 on xhci1 as disabled
arm64: dts: mediatek: mt8195-cherry: Mark USB 3.0 on xhci1 as disabled
arm64: dts: mediatek: mt8195: Add SCP phandle to MDP3 DMA controller
...
Link: https://lore.kernel.org/r/059656ad-5365-4097-86a1-f4ba43edf5da@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New boards the Odroid-M2 and GameForce Ace, CAN on rk3568, RGA2 on rk3588
and some non-critical dts cleanups.
* tag 'v6.12-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board
arm64: dts: rockchip: add CAN-FD controller nodes to rk3568
arm64: dts: rockchip: remove duplicate nodes from dts for ROCK 4SE
arm64: dts: rockchip: Add GameForce Ace
dt-bindings: arm: rockchip: Add GameForce Ace
arm64: dts: rockchip: rk3588s fix sdio pins to pull up
arm64: dts: rockchip: Add RGA2 support to rk3588
arm64: dts: rockchip: Add missing tshut props to tsadc on quartz64-b
arm64: dts: rockchip: Add Hardkernel ODROID-M2
dt-bindings: arm: rockchip: Add Hardkernel ODROID-M2
arm64: dts: rockchip: drop hp-pin-name property from audio card on nanopc-t6
Link: https://lore.kernel.org/r/11663608.jrtcCam0TZ@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Minor improvements in ARM64 DTS for v6.12
1. APM: correct node name to match bindings.
2. Spreadtrum: correct node names to match bindings, order properties to
match DTS coding style and put SPDX identifier at top of the file as
expected usually.
* tag 'dt64-cleanup-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
arm64: dts: sprd: move/add SPDX license to top of the file
arm64: dts: sprd: reorder clock-names after clocks
arm64: dts: sprd: rename SDHCI and fuel gauge nodes to match bindings
arm64: dts: apm: storm: Rename menetphy@3 to ethernet-phy@3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The DPI display interface feeds the external display pipeline. However
the pipeline representation is currently incomplete. Efforts are still
under way to come up with a way to represent the "creative" repurposing
of the DP bridge chip's internal output mux, which is meant to support
USB type-C orientation changes, to output to one of two type-C ports.
Until that is finalized, the external display can't be fully described,
and thus won't work. Even worse, the half complete graph potentially
confuses the OS, breaking the internal display as well.
Disable the external display interface across the whole Corsola family
until the DP / USB Type-C muxing graph binding is ready.
Reported-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Closes: https://lore.kernel.org/linux-mediatek/38a703a9-6efb-456a-a248-1dd3687e526d@gmail.com/
Fixes: 8855d01fb8 ("arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240821042836.2631815-1-wenst@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Qualcomm Arm64 DeviceTree updates for v6.12
This introduces support for the following devices:
- Lenovo Thinkpad T14s Gen 6
- Microsoft Surface Laptop 7 laptop
- Lenovo A6000
- Lenovo A6010
- Samsung Galaxy J3,
- Lenovo Vibe K5 (multiple variants)
- LG G4
IPQ5332 global clock controller is marked as an interconnect-provider,
and the USB interrupt triggers are corrected.
Touchscreen description is added to the Samsung Galaxy Core Prime and
Max, and touch keys are added to the Samsung Galaxy Grand Prime and
Galaxy Tab A.
Camera flash is added to BQ Aquaris M5 and X5.
The SD-card slot is described for the QCM6490 IDP.
For SA8775P CPU and LLCC bwmon is added, audio, compute and general
purpose DSP remoteprocs are added, with FastRPC on audio and compute
DSP. CPUidle states, capacity and DPC properties are added.
On SC8180X definitions for the multiport USB controller is introduced,
and enabled on the Lenovo Flex 5G to bring the camera to life. Power key
definitions are added as well.
The RGB camera sensor on the Lenovo ThinkPad X13s is described. PCIe
pinconf properties are cleaned up on this and the CRD. The four USB
Type-A ports found on the SA8295P ADP are enabled.
The modem subsystem remoteproc is introduced on the SDX75 and enabled on
the IDP device.
Camera, display and GPU clock controllers are added for the SM4450
platform.
On the F(x)tec Pro1X device, display, GPU, WiFi, RGB LED, SD-card,
remoteprocs, USB3 SuperSpeed, touchscreen, IO-expander, hall switch,
caps lock LED and camera button are introduced.
The camera clock controller is added to SM8150, and the GPU-only
"amd,imageon" compatible is dropped from the MTP device.
Refgen regulator for the DSI nodes of SM8350 is described, and the
display subsystem interconnect paths are corrected.
The camera control interface controllers are described on both SM8550
and SM8650. The bluetooth node on on SM8550 QRD, SM8650 QRD and SM8650
HDK are transitioned to the power sequence description. WiFi is added to
the SM8550 hardware development kit (HDK).
On the X1 Elite platform, one more UART, a DisplayPort PHY, the USB
multiport controller, a PCIe controller and PHY are added. Orientation
switching is wired up for the USB+DP PHYs. RPMh statistics node is
added. For the X1 Elite CRD the LID switch and the SDX65 modems are
introduced.
* tag 'qcom-arm64-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (120 commits)
arm64: dts: qcom: x1e80100: Fix PHY for DP2
arm64: dts: qcom: qcm6490-idp: Add SD Card node
arm64: dts: qcom: x1e80100: Add orientation-switch to all USB+DP QMP PHYs
arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6
dt-bindings: arm: qcom: Add Lenovo ThinkPad T14s Gen 6
Revert "arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash"
arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices
arm64: dts: qcom: x1e80100: Add UART2
arm64: dts: qcom: x1e80100-pmics: Add PMC8380C PWM
dt-bindings: arm: qcom: Add Surface Laptop 7 devices
arm64: dts: qcom: sm8150-mtp: drop incorrect amd,imageon
arm64: qcom: sa8775p: Add ADSP and CDSP0 fastrpc nodes
arm64: dts: qcom: x1e80100: Add USB Multiport controller
arm64: dts: qcom: sa8775p: fix the fastrpc label
arm64: dts: qcom: ipq5332: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ5332 support
arm64: dts: qcom: sm8250: move lpass codec macros to use clks directly
arm64: dts: qcom: msm8998: Add disabled support for LPASS iommu for Q6
dt-bindings: clock: gcc-msm8998: Add Q6 and LPASS clocks definitions
arm64: dts: qcom: msm8976: Add restart node
...
Link: https://lore.kernel.org/r/20240904215752.24465-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX arm64 device tree changes for 6.12:
- A series from Alexander Stein that improves imx93-tqma9352 board
support by adding PMIC, eMMC regulators, pad configurations, etc.
- A series from Benjamin Hahn that enables overlay for no Ethernet
device, TPM and PCIe support for imx8mp-phycore board
- A few changes from Fabio Estevam that fix dt-schema warnings for
i.MX8MM and i.MX93 based boards
- A series from Francesco Dolcini to add fxl6408 gpio expander, PMIC
thermal zone and USB3803 HUB for colibri-imx8x board
- A great number of changes from Frank Li that improve i.MX95 based with
many device additions, and fix dt-schema warnings on various i.MX8 and
layerscape device trees
- A series from João Paulo Gonçalves to add HDMI audio, analog input,
VPU, and sound card support for Toradex Verdin and Colibri boards
- A series from Markus Niebel to improve imx93-tqma9352 board support
- Add support for Kontron i.MX93 OSM-S SoM and BL carrier board
- A couple of changes from Peng Fan to describe cache configuration for
i.MX93 SoC and add device tree for i.MX93-14x14-EVK board
- A series from Shengjiu Wang to improve various audio features for
imx93-11x11-evk board
- A series from Yashwanth Varakala to better describe regulator usage
for imx8mp-phyboard-pollux board
- Other random changes on various board device trees
* tag 'imx-dt64-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (121 commits)
arm64: dts: imx: rename gpio hog as <gpio name>-hog
arm64: dts: imx8mp-var-som-symphony: Add Variscite Symphony board and VAR-SOM-MX8MP SoM
arm64: dts: imx8mm-var-som: drop unused top-level compatible
arm64: dts: ls1088ardb: add new RTC PCF2131 support
arm64: dts: colibri-imx8x: Cleanup comments
arm64: dts: colibri-imx8x: Add 50mhz clock for eth
arm64: dts: colibri-imx8x: Add adma_pwm
arm64: dts: colibri-imx8x: Add vpu support
arm64: dts: colibri-imx8x: Add USB3803 HUB
arm64: dts: colibri-imx8x: Add PMIC thermal zone
arm64: dts: colibri-imx8x: Add sound card
arm64: dts: colibri-imx8x: Add fxl6408 gpio expander
arm64: dts: colibri-imx8x: Add analog inputs
arm64: dts: colibri-imx8x: Add usb support
arm64: dts: imx8qm-mek: add usb 3.0 and related type C nodes
arm64: dts: imx8qm-mek: add i2c in mipi[0,1] subsystem
arm64: dts: imx8qm-mek: add pwm and i2c in lvds subsystem
arm64: dts: imx8qm-mek: add cm4 remote-proc and related memory region
arm64: dts: imx8qm: add mipi subsystem
arm64: dts: imx8: add basic mipi subsystem
...
Link: https://lore.kernel.org/r/20240904143439.211552-5-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas DTS updates for v6.12 (take two)
- Add support for Ethernet TSN and PCIe on the R-Car V4H SoC and the
White-Hawk (Single) development board,
- Add display support for the RZ/G2UL SoC and the RZ/G2UL SMARC EVk
board,
- Add I2C support for the RZ/G3S SoC and the RZ/G3S SMARC EVK board,
- Add support for HDMI audio on the RZ/G2L and RZ/G2LC SMARC EVK
boards,
- Add initial support for the RZ/V2H(P) (R9A09G057) SoC and the RZ/V2H
EVK board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.12-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (34 commits)
arm64: dts: renesas: r8a779h0: Add family fallback for CSISP IP
arm64: dts: renesas: r8a779a0: Add family fallback for CSISP IP
arm64: dts: renesas: r8a779g0: Add family fallback for CSISP IP
arm64: dts: renesas: r8a779h0: Add family fallback for VIN IP
arm64: dts: renesas: r8a779a0: Add family fallback for VIN IP
arm64: dts: renesas: r8a779g0: Add family fallback for VIN IP
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable watchdog
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable OSTM, I2C, and SDHI
arm64: dts: renesas: r9a09g057: Add WDT0-WDT3 nodes
arm64: dts: renesas: r9a09g057: Add SDHI0-SDHI2 nodes
arm64: dts: renesas: r9a09g057: Add RIIC0-RIIC8 nodes
arm64: dts: renesas: r9a09g057: Add OSTM0-OSTM7 nodes
arm64: dts: renesas: Add initial DTS for RZ/V2H EVK board
arm64: dts: renesas: Add initial SoC DTSI for RZ/V2H(P) SoC
dt-bindings: soc: renesas: Document RZ/V2H EVK board
dt-bindings: clock: renesas: Document RZ/V2H(P) SoC CPG
arm64: dts: renesas: r9a07g043u11-smarc: Enable DU
arm64: dts: renesas: rzg2lc-smarc: Enable HDMI audio
arm64: dts: renesas: rzg2l-smarc: Enable HDMI audio
arm64: dts: renesas: r9a07g043u: Add DU node
...
Link: https://lore.kernel.org/r/cover.1725374275.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A number of pin fixes for Puma, Rock-Pi-E and rk356x, and as it turns
out the VO0 and VO1 general register files are not identical as suggested
by their original compatible. As there are no users of those yet,
everybody agreed that we should fix the compatibles.
* tag 'v6.11-rockchip-dtsfixes' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
dt-bindings: soc: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma
arm64: dts: rockchip: fix eMMC/SPI corruption when audio has been used on RK3399 Puma
arm64: dts: rockchip: fix PMIC interrupt pin in pinctrl for ROCK Pi E
arm64: dts: rockchip: Remove broken tsadc pinctrl binding for rk356x
Link: https://lore.kernel.org/r/7602696.A5hrfCrGMc@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
these nodes just define same properties in rk3399-rock-pi-4.dtsi.
remove them from rk3399-rock-4se.dts.
sha256sum rk3399-rock-4se.dtb generates same hash value before/after
this change.
Fixes: 86a0e14a82 ("arm64: dts: rockchip: Add Radxa ROCK 4SE")
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20240903073544.2161-1-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The GameForce Ace is a portable gaming device based on the Rockchip
RK3588s SoC.
The device contains the following hardware that is tested/working:
- 128GB eMMC
- SDMMC card slot
- Ampak SDIO WiFi 5/BT
- NVME 2242 socket
- 8 or 12GB of RAM
- Goodix based touchscreen
- Stereo speakers, internal microphone, and TRRS headphone jack.
- Dual GPIO vibrators (implemented as gpio-pwm because they are
quite strong)
- Multiple face buttons, dual analog joysticks, and dual analog
triggers
- PWM fan with tach pin.
The device also contains the following hardware that is partially or
currently not working:
- 1920x1080 DSI display
- HDMI port
- USB-C port with DP alt-mode
- TI bq25703 charger controller
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20240829204517.398669-4-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the missing TSADC properties `rockchip,hw-tshut-mode` and
`rockchip,hw-tshut-polarity` to the Pine64 Quartz64 Model B.
This fixes the following warnings:
rockchip-thermal fe710000.tsadc: Missing tshut mode property, using default (gpio)
rockchip-thermal fe710000.tsadc: Missing tshut-polarity property, using default (low)
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20240831112949.60091-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Hardkernel ODROID-M2 is a single-board computer based on Rockchip
RK3588S2 SoC. It features e.g. 8/16 GB LPDDR5 RAM, 64 GB eMMC, SD-card,
GbE LAN, HDMI 2.0, M.2 NVMe and USB 2.0/3.0/Type-C.
Add initial support for eMMC, SD-card, Ethernet, PCIe and USB.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240901112020.3224704-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The audio-card contains a hp-pin-name property that is not part of the
binding, and its contents also are just a "Headphones" string.
So that property also does not fullfill any specific use, therefore
just drop it.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240830203819.1972536-4-heiko@sntech.de
Add thermal trips for the two GPU thermal sensors found in the Allwinner A64.
There's only one GPU OPP defined since the commit 1428f0c19f ("arm64: dts:
allwinner: a64: Run GPU at 432 MHz"), so defining only the critical thermal
trips makes sense for the A64's two GPU thermal zones.
Having these critical thermal trips defined ensures that no hot spots develop
inside the SoC die that exceed the maximum junction temperature. That might
have been possible before, although quite unlikely, because the CPU and GPU
portions of the SoC are packed closely inside the SoC, so the overheating GPU
would inevitably result in the heat soaking into the CPU portion of the SoC,
causing the CPU thermal sensor to return high readings and trigger the CPU
critical thermal trips. However, it's better not to rely on the heat soak
and have the critical GPU thermal trips properly defined instead.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Tested-by: Norayr Chilingarian <norayr@arnet.am>
Link: https://lore.kernel.org/r/0a6110a7b27a050bd58ab3663087eecd8e873ac0.1724126053.git.dsimic@manjaro.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Rename admin_led_lower to admin-led-lower-hog.
Rename gpio rs485_en as rs485-en-hog.
Rename gpio uart4_rs485_en to uart4-rs485-en-hog.
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dtb: gpio@76:
'admin_led_lower' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtb:
gpio@30230000: 'rs485_en' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtb:
gpio@30220000: 'uart4_rs485_en' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adds the DTSI file for the Variscite VAR-SOM-MX8MP System on Module which
is delivered with the Variscite Symphony Evaluation Kit.
Initial support includes:
- Serial console
- eMMC
- SD card
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Variscite VAR-SOM-MX8MM System-on-Module cannot be used alone
without motherboard, so drop the top-level compatible field to avoid any
false impression that such usage is possible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove unnecessary comments. The Colibri-iMX8X doesn't support FlexCAN,
and the GPU is already enabled in the SOC dtsi.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add fxl6408 gpio expander, this is required for Wi-Fi, Bluetooth and USB
functionalities.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
