mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-12-29 12:25:35 -05:00
c56f9ecb7fb6a3a90079c19eb4c8daf3bbf514b3
73375 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Krzysztof Kozlowski
|
1ee68f1724 |
dt-bindings: input: Revert "dt-bindings: input: Goodix SPI HID Touchscreen"
This reverts commit |
||
|
Linus Torvalds
|
a65b3c3ed4 |
Merge tag 'hid-for-linus-2024091602' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina: - New HID over SPI driver for Goodix devices that don't follow Microsoft's HID-over-SPI specification, so a separate driver is needed. Currently supported device is GT7986U touchscreen (Charles Wang) - support for new hardware features in Wacom driver (high-res wheel scrolling, touchstrings with relative motions, support for two touchrings) (Jason Gerecke) - support for customized vendor firmware loading in intel-ish driver (Zhang Lixu) - fix for theoretical race condition in i2c-hid (Dmitry Torokhov) - support for HIDIOCREVOKE -- evdev's EVIOCREVOKE equivalent in hidraw (Peter Hutterer) - initial hidraw selftest implementation (Benjamin Tissoires) - constification of device-specific report descriptors (Thomas Weißschuh) - other small assorted fixes and device ID / quirk additions * tag 'hid-for-linus-2024091602' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (54 commits) hid: cp2112: Use irq_get_trigger_type() helper HID: i2c-hid: ensure various commands do not interfere with each other HID: multitouch: Add support for Thinkpad X12 Gen 2 Kbd Portfolio HID: wacom: Do not warn about dropped packets for first packet HID: wacom: Support sequence numbers smaller than 16-bit HID: lg: constify fixed up report descriptor HID: uclogic: constify fixed up report descriptor HID: waltop: constify fixed up report descriptor HID: sony: constify fixed up report descriptor HID: pxrc: constify fixed up report descriptor HID: steelseries: constify fixed up report descriptor HID: viewsonic: constify fixed up report descriptor HID: vrc2: constify fixed up report descriptor HID: xiaomi: constify fixed up report descriptor HID: maltron: constify fixed up report descriptor HID: keytouch: constify fixed up report descriptor HID: holtek-kbd: constify fixed up report descriptor HID: dr: constify fixed up report descriptor HID: bigbenff: constify fixed up report descriptor HID: picoLCD: Use backlight power constants ... |
||
|
Linus Torvalds
|
18aa0ddd4c |
Merge tag 'for-linus-6.12-1' of https://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard: "Some minor fixes and cleanups for IPMI. Nothing big. Handle a bogus BMC a little better, fix autoload on some systems, remove some deprecated interfaces from the docs" * tag 'for-linus-6.12-1' of https://github.com/cminyard/linux-ipmi: ipmi: docs: don't advertise deprecated sysfs entries ipmi:ssif: Improve detecting during probing ipmi: ipmi_ssif: fix module autoloading |
||
|
Linus Torvalds
|
84bbfe6b64 |
Merge tag 'platform-drivers-x86-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers updates from Hans de Goede: - asus-wmi: Add support for vivobook fan profiles - dell-laptop: Add knobs to change battery charge settings - lg-laptop: Add operation region support - intel-uncore-freq: Add support for efficiency latency control - intel/ifs: Add SBAF test support - intel/pmc: Ignore all LTRs during suspend - platform/surface: Support for arm64 based Surface devices - wmi: Pass event data directly to legacy notify handlers - x86/platform/geode: switch GPIO buttons and LEDs to software properties - bunch of small cleanups, fixes, hw-id additions, etc. * tag 'platform-drivers-x86-v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits) MAINTAINERS: adjust file entry in INTEL MID PLATFORM platform/x86: x86-android-tablets: Adjust Xiaomi Pad 2 bottom bezel touch buttons LED platform/mellanox: mlxbf-pmc: fix lockdep warning platform/x86/amd: pmf: Add quirk for TUF Gaming A14 platform/x86: touchscreen_dmi: add nanote-next quirk platform/x86: asus-wmi: don't fail if platform_profile already registered platform/x86: asus-wmi: add debug print in more key places platform/x86: intel_scu_wdt: Move intel_scu_wdt.h to x86 subfolder platform/x86: intel_scu_ipc: Move intel_scu_ipc.h out of arch/x86/include/asm MAINTAINERS: Add Intel MID section platform/x86: panasonic-laptop: Add support for programmable buttons platform/olpc: Remove redundant null pointer checks in olpc_ec_setup_debugfs() platform/x86: intel/pmc: Ignore all LTRs during suspend platform/x86: wmi: Call both legacy and WMI driver notify handlers platform/x86: wmi: Merge get_event_data() with wmi_get_notify_data() platform/x86: wmi: Remove wmi_get_event_data() platform/x86: wmi: Pass event data directly to legacy notify handlers platform/x86: thinkpad_acpi: Fix uninitialized symbol 's' warning platform/x86: x86-android-tablets: Fix spelling in the comments platform/x86: ideapad-laptop: Make the scope_guard() clear of its scope ... |
||
|
Linus Torvalds
|
2a17bb8c20 |
Merge tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Drop duplicate devices in trivial-devices.yaml
- Add a common serial peripheral device schema and reference it in
serial device schemas.
- Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt,
snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis,
fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522,
aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer,
ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema
- Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p,
fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc,
isil,isl69260, ti,tps546d24, and lpc32xx DMA mux
- Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and
mediatek,mt6795-sys-clock.yaml
- Add arm,gic ESPI and EPPI interrupt type specifiers
- Add another batch of legacy compatible strings which we have no
intention of documenting
- Add dmas/dma-names properties to FSL lcdif
- Fix wakeup-source reference to m8921-keypad.yaml
- Treewide fixes of typos in bindings
DT Core:
- Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429
- More conversions to scoped iterators and __free() initializer
- Handle overflows in address resources on 32-bit systems
- Extend extracting compatible strings in sources from function
parameters
- Use of_property_present() in DT unittest
- Clean-up of_irq_to_resource() to use helpers
- Support #msi-cells=<0> in of_msi_get_domain()
- Improve the kerneldoc for of_property_match_string()
- kselftest: Ignore nodes that have ancestors disabled"
* tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (59 commits)
dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
dt-bindings: cpu: Drop duplicate nvidia,tegra186-ccplex-cluster.yaml
dt-bindings: clock: mediatek: Drop duplicate mediatek,mt6795-sys-clock.yaml
of/irq: Use helper to define resources
of/irq: Make use of irq_get_trigger_type()
dt-bindings: clk: vc5: Make SD/OE pin configuration properties not required
drivers/of: Improve documentation for match_string
of: property: Do some clean up with use of __free()
dt-bindings: watchdog: qcom-wdt: document support on SA8255p
dt-bindings: interrupt-controller: fsl,irqsteer: Document fsl,imx8qm-irqsteer
dt-bindings: interrupt-controller: arm,gic: add ESPI and EPPI specifiers
dt-bindings: dma: Add lpc32xx DMA mux binding
dt-bindings: trivial-devices: Drop duplicate "maxim,max1237"
dt-bindings: trivial-devices: Drop duplicate LM75 compatible devices
dt-bindings: trivial-devices: Deprecate "ad,ad7414"
dt-bindings: trivial-devices: Drop incorrect and duplicate at24 compatibles
dt-bindings: wakeup-source: update reference to m8921-keypad.yaml
dt-bindings: interrupt-controller: qcom-pdc: document support for SA8255p
dt-bindings: Fix various typos
of: address: Unify resource bounds overflow checking
...
|
||
|
Linus Torvalds
|
45d986d113 |
Merge tag 'ovl-update-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs updates from Amir Goldstein: - Increase robustness of overlayfs to crashes in the case of underlying filesystems that to not guarantee metadata ordering to persistent storage (problem was reported with ubifs). - Deny mount inside container with features that require root privileges to work properly, instead of failing operations later. - Some clarifications to overlayfs documentation. * tag 'ovl-update-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs: ovl: fail if trusted xattrs are needed but caller lacks permission overlayfs.rst: update metacopy section in overlayfs documentation ovl: fsync after metadata copy-up ovl: don't set the superblock's errseq_t manually |
||
|
Detlev Casanova
|
0c36680c0e |
dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
It is compatible with the other rockchip SoCs. Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20240903152308.13565-7-detlev.casanova@collabora.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org> |
||
|
Linus Torvalds
|
4a39ac5b7d |
Merge tag 'random-6.12-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"Originally I'd planned on sending each of the vDSO getrandom()
architecture ports to their respective arch trees. But as we started
to work on this, we found lots of interesting issues in the shared
code and infrastructure, the fixes for which the various archs needed
to base their work.
So in the end, this turned into a nice collaborative effort fixing up
issues and porting to 5 new architectures -- arm64, powerpc64,
powerpc32, s390x, and loongarch64 -- with everybody pitching in and
commenting on each other's code. It was a fun development cycle.
This contains:
- Numerous fixups to the vDSO selftest infrastructure, getting it
running successfully on more platforms, and fixing bugs in it.
- Additions to the vDSO getrandom & chacha selftests. Basically every
time manual review unearthed a bug in a revision of an arch patch,
or an ambiguity, the tests were augmented.
By the time the last arch was submitted for review, s390x, v1 of
the series was essentially fine right out of the gate.
- Fixes to the the generic C implementation of vDSO getrandom, to
build and run successfully on all archs, decoupling it from
assumptions we had (unintentionally) made on x86_64 that didn't
carry through to the other architectures.
- Port of vDSO getrandom to LoongArch64, from Xi Ruoyao and acked by
Huacai Chen.
- Port of vDSO getrandom to ARM64, from Adhemerval Zanella and acked
by Will Deacon.
- Port of vDSO getrandom to PowerPC, in both 32-bit and 64-bit
varieties, from Christophe Leroy and acked by Michael Ellerman.
- Port of vDSO getrandom to S390X from Heiko Carstens, the arch
maintainer.
While it'd be natural for there to be things to fix up over the course
of the development cycle, these patches got a decent amount of review
from a fairly diverse crew of folks on the mailing lists, and, for the
most part, they've been cooking in linux-next, which has been helpful
for ironing out build issues.
In terms of architectures, I think that mostly takes care of the
important 64-bit archs with hardware still being produced and running
production loads in settings where vDSO getrandom is likely to help.
Arguably there's still RISC-V left, and we'll see for 6.13 whether
they find it useful and submit a port"
* tag 'random-6.12-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (47 commits)
selftests: vDSO: check cpu caps before running chacha test
s390/vdso: Wire up getrandom() vdso implementation
s390/vdso: Move vdso symbol handling to separate header file
s390/vdso: Allow alternatives in vdso code
s390/module: Provide find_section() helper
s390/facility: Let test_facility() generate static branch if possible
s390/alternatives: Remove ALT_FACILITY_EARLY
s390/facility: Disable compile time optimization for decompressor code
selftests: vDSO: fix vdso_config for s390
selftests: vDSO: fix ELF hash table entry size for s390x
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO64
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO32
powerpc/vdso: Refactor CFLAGS for CVDSO build
powerpc/vdso32: Add crtsavres
mm: Define VM_DROPPABLE for powerpc/32
powerpc/vdso: Fix VDSO data access when running in a non-root time namespace
selftests: vDSO: don't include generated headers for chacha test
arm64: vDSO: Wire up getrandom() vDSO implementation
arm64: alternative: make alternative_has_cap_likely() VDSO compatible
selftests: vDSO: also test counter in vdso_test_chacha
...
|
||
|
Linus Torvalds
|
c8d8a35d09 |
Merge tag 'livepatching-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching update from Petr Mladek: - Small documentation improvement * tag 'livepatching-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: Documentation: livepatch: Correct release locks antonym |
||
|
Linus Torvalds
|
eec91e22fe |
Merge tag 'iommu-updates-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core changes:
- Allow ATS on VF when parent device is identity mapped
- Optimize unmap path on ARM io-pagetable implementation
- Use of_property_present()
ARM-SMMU changes:
- SMMUv2:
- Devicetree binding updates for Qualcomm MMU-500 implementations
- Extend workarounds for broken Qualcomm hypervisor to avoid
touching features that are not available (e.g. 16KiB page
support, reserved context banks)
- SMMUv3:
- Support for NVIDIA's custom virtual command queue hardware
- Fix Stage-2 stall configuration and extend tests to cover this
area
- A bunch of driver cleanups, including simplification of the
master rbtree code
- Minor cleanups and fixes across both drivers
Intel VT-d changes:
- Retire si_domain and convert to use static identity domain
- Batched IOTLB/dev-IOTLB invalidation
- Small code refactoring and cleanups
AMD-Vi changes:
- Cleanup and refactoring of io-pagetable code
- Add parameter to limit the used io-pagesizes
- Other cleanups and fixes"
* tag 'iommu-updates-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (77 commits)
dt-bindings: arm-smmu: Add compatible for QCS8300 SoC
iommu/amd: Test for PAGING domains before freeing a domain
iommu/amd: Fix argument order in amd_iommu_dev_flush_pasid_all()
iommu/amd: Add kernel parameters to limit V1 page-sizes
iommu/arm-smmu-v3: Reorganize struct arm_smmu_ctx_desc_cfg
iommu/arm-smmu-v3: Add types for each level of the CD table
iommu/arm-smmu-v3: Shrink the cdtab l1_desc array
iommu/arm-smmu-v3: Do not use devm for the cd table allocations
iommu/arm-smmu-v3: Remove strtab_base/cfg
iommu/arm-smmu-v3: Reorganize struct arm_smmu_strtab_cfg
iommu/arm-smmu-v3: Add types for each level of the 2 level stream table
iommu/arm-smmu-v3: Add arm_smmu_strtab_l1/2_idx()
iommu/arm-smmu-qcom: apply num_context_bank fixes for SDM630 / SDM660
iommu/arm-smmu-v3: Use the new rb tree helpers
dt-bindings: arm-smmu: document the support on SA8255p
iommu/tegra241-cmdqv: Do not allocate vcmdq until dma_set_mask_and_coherent
iommu/tegra241-cmdqv: Drop static at local variable
iommu/tegra241-cmdqv: Fix ioremap() error handling in probe()
iommu/amd: Do not set the D bit on AMD v2 table entries
iommu/amd: Correct the reported page sizes from the V1 table
...
|
||
|
Linus Torvalds
|
c27ea952c6 |
Merge tag 'hwmon-for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- driver for Sophgo SG2042 external hardware monitor
- thermal sensor driver for Surface Aggregator Module
Added support to existing drivers:
- oxp-sensors: Support for multiple new devices.
- nct6775: Added G15CF to ASUS WMI monitoring list
Modernizations:
- driver cleanup and update to use with_info API: ina2xx, lm92,
lm95234, max1619, max1668, and max6697.
API updates:
- removed unused devm_hwmon_device_unregister() API function
Other notable changes
- implement and use generic bus access delay for pmbus drivers
- use with scoped for each OF child loop in several drivers
- module unloading fixes for gsc-hwmon and ntc_thermistor drivers
- converted various drivers to use multi-byte regmap operations
- adt7475: Improved devicetree based configuration
- ltc2947: Move to firmware agnostic API
- ltc2978: Converted devicetree description to yaml
- max16065: Addressed overflows when writing limit attributes
Various other minor cleanups, fixes and improvements"
* tag 'hwmon-for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (96 commits)
hwmon: Remove devm_hwmon_device_unregister() API function
hwmon: (sch5636) Print unknown ID in error string via %*pE
hwmon: (sht21) Use %*ph to print small buffer
hwmon: (pmbus/mpq7932) Constify struct regulator_desc
hwmon: pmbus: pli12096bc: Add write delay
hwmon: pmbus: zl6100: Use generic code
hwmon: pmbus: ucd9000: Use generic code
hwmon: pmbus: max15301: Use generic code
hwmon: pmbus: Implement generic bus access delay
hwmon: (ina2xx) Use shunt voltage to calculate current
hwmon: (ina2xx) Add support for current limits
hwmon: (ina2xx) Pass register to alert limit write functions
hwmon: (ina2xx) Convert to use with_info hwmon API
hwmon: (ina2xx) Move ina2xx_get_value()
hwmon: (ina2xx) Set alert latch
hwmon: (ina2xx) Consolidate chip initialization code
hwmon: (ina2xx) Fix various overflow issues
hwmon: (ina2xx) Re-initialize chip using regmap functions
hwmon: (ina2xx) Use local regmap pointer if used more than once
hwmon: (ina2xx) Mark regmap_config as const
...
|
||
|
Linus Torvalds
|
7c9026b2b0 |
Merge tag 'pstore-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook: - ramoops: Fix .rst typo (Steven Rostedt) - pstore: replace spinlock_t by raw_spinlock_t (Wen Yang) * tag 'pstore-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore: replace spinlock_t by raw_spinlock_t pstore/ramoops: Fix typo as there is no "reserver" |
||
|
Linus Torvalds
|
200289db26 |
Merge tag 'pmdomain-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add support for s2idle for CPU PM domains on PREEMPT_RT
- Add device managed version of dev_pm_domain_attach|detach_list()
- Improve layout of the debugfs summary table
pmdomain providers:
- amlogic: Remove obsolete vpu domain driver
- bcm: raspberrypi: Add support for devices used as wakeup-sources
- imx: Fixup clock handling for imx93 at driver remove
- rockchip: Add gating support for RK3576
- rockchip: Add support for RK3576 SoC
- Some OF parsing simplifications
- Some simplifications by using dev_err_probe() and guard()
pmdomain consumers:
- qcom/media/venus: Convert to the device managed APIs for PM domains
cpuidle-psci:
- Add support for s2idle/s2ram for the hierarchical topology on
PREEMPT_RT
- Some OF parsing simplifications"
* tag 'pmdomain-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (39 commits)
pmdomain: core: Reduce debug summary table width
pmdomain: core: Move mode_status_str()
pmdomain: core: Fix "managed by" alignment in debug summary
pmdomain: core: Harden inter-column space in debug summary
pmdomain: rockchip: Add gating masks for rk3576
pmdomain: rockchip: Add gating support
pmdomain: rockchip: Simplify dropping OF node reference
pmdomain: mediatek: make use of dev_err_cast_probe()
pmdomain: imx93-pd: drop the context variable "init_off"
pmdomain: imx93-pd: don't unprepare clocks on driver remove
pmdomain: imx93-pd: replace dev_err() with dev_err_probe()
pmdomain: qcom: rpmpd: Simplify locking with guard()
pmdomain: qcom: rpmhpd: Simplify locking with guard()
pmdomain: qcom: cpr: Simplify locking with guard()
pmdomain: qcom: cpr: Simplify with dev_err_probe()
pmdomain: imx: gpcv2: Simplify with scoped for each OF child loop
pmdomain: imx: gpc: Simplify with scoped for each OF child loop
pmdomain: rockchip: SimplUlf Hanssonify locking with guard()
pmdomain: rockchip: Simplify with scoped for each OF child loop
pmdomain: qcom-cpr: Use scope based of_node_put() to simplify code.
...
|
||
|
Linus Torvalds
|
2fe3c78a2c |
Merge tag 'pwrseq-updates-for-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing updates from Bartosz Golaszewski: "There's one change adding support for a new PMU model and another adding documentation for the subsystem which probably should have been part of the initial commit but better late than never: - add support for the new PMU variant inside the WCN6855 chipset - add documentation for the subsystem" * tag 'pwrseq-updates-for-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: Documentation: add a driver API doc for the power sequencing subsystem power: sequencing: qcom-wcn: add support for the WCN6855 PMU |
||
|
Linus Torvalds
|
9b08f8327f |
Merge tag 'gpio-updates-for-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"Core GPIOLIB:
- provide and add users for a macro allowing to iterate over accepted
GPIO property names of consumer device nodes
- remove legacy definitions that are no longer used
- put legacy GPIO devres helpers together with the rest of the
deprecated code
- implement and use swnode_gpio_get_reference(): a wrapper
simplifying the underlying calls to
fwnode_property_get_reference_args()
- use IS_ERR_OR_NULL() where it makes sense
- replace of_find_property() with of_property_present()
- simplify code with the scoped variant of OF-node children iterator
Documentation:
- update GPIO kerneldocs with Return sections
- fix "Excess struct member description" warnings now being triggered
with W=1
New drivers:
- add support for Analog Devices ADP5585
Driver improvements:
- add support for wake-on-GPIO to gpio-mpc8xxx
- use GPIO_LOOKUP_IDX() in gpio-virtuser
- use devm_clk_get_[optional_]enabled() where applicable in several
drivers
- replace OF-specific functions with provider-agnostic alternatives
where possible
- drop support for legacy platform data from gpio-ath79 and
gpio-davinci
- refactor gpio-stmpe
- improve error reporting in gpio-pca953x
- add support for reading the direction of pins for some models to
gpio-vf610
DT bindings:
- convert the bindings for nxp,lpc3220 to YAML
- add gpio-reserved-ranges to gpio-davinci
- simplify the GPIO hog schema
- fix a GPIO hog issue in bindings for fcs,fxl6408
Other:
- fix format specifiers in user-space tools
- remove leftover files on make clean in tools/gpio/"
* tag 'gpio-updates-for-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (54 commits)
gpio: mpc8xxx: switch to using DEFINE_RUNTIME_DEV_PM_OPS()
gpio: xilinx: Use helper function devm_clk_get_optional_enabled()
gpio: mb86s7x: Use helper function devm_clk_get_optional_enabled()
gpio: lpc18xx: Use helper function devm_clk_get_enabled()
gpio: cadence: Use helper function devm_clk_get_enabled()
gpio: sama5d2-piobu: convert comma to semicolon
gpio: mpc8xxx: order headers alphabetically
gpio: davinci: use devm_clk_get_enabled()
gpio: davinci: drop platform data support
gpio: stmpe: Sort headers
gpio: stmpe: Make use of device properties
gpio: stmpe: Utilise temporary variable for struct device
gpio: stmpe: Remove unused 'dev' member of struct stmpe_gpio
gpio: stmpe: Fix IRQ related error messages
gpio: pch: kerneldoc fixes for excess members
gpio: zynq: Simplify using devm_clk_get_enabled()
gpio: mpc8xxx: Add wake on GPIO support
gpio: syscon: fix excess struct member build warning
gpio: stp-xway: Simplify using devm_clk_get_enabled()
gpiolib: legacy: Consolidate devm_gpio_*() with other legacy APIs
...
|
||
|
Linus Torvalds
|
cc52dc2fe3 |
Merge tag 'pwm/for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König: "This contains some cleanups to the core and some mostly minor updates to a bunch of drivers and device tree bindings. One thing worth pointing out is that it contains an immutable branch containing support for a new mfd chip (Analog Devices ADP5585) with several sub drivers. Thanks go to Andrew Kreimer, Clark Wang, Conor Dooley, David Lechner, Dmitry Rokosov, Frank Li, Geert Uytterhoeven, George Stark, Jiapeng Chong, Krzysztof Kozlowski, Laurent Pinchart, Liao Chen, Liu Ying, Rob Herring and Wolfram Sang for code contributions and reviews and to Lee Jones for preparing the above mentioned immutable branch" * tag 'pwm/for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (21 commits) pwm: stm32: Fix a typo dt-bindings: pwm: amlogic: Add new bindings for meson A1 PWM dt-bindings: pwm: amlogic: Add optional power-domains pwm: Switch back to struct platform_driver::remove() dt-bindings: pwm: allwinner,sun4i-a10-pwm: add top-level constraints pwm: axi-pwmgen: use shared macro for version reg pwm: atmel-hlcdc: Drop trailing comma pwm: atmel-hlcdc: Enable module autoloading pwm: omap-dmtimer: Use of_property_read_bool() pwm: adp5585: Set OSC_EN bit to 1 when PWM state is enabled pwm: lp3943: Fix an incorrect type in lp3943_pwm_parse_dt() pwm: Simplify pwm_capture() pwm: lp3943: Use of_property_count_u32_elems() to get property length pwm: Don't export pwm_capture() pwm: Make info in traces about affected pwm more useful dt-bindings: pwm: renesas,tpu: Add r8a779h0 support dt-bindings: pwm: renesas,pwm-rcar: Add r8a779h0 support pwm: adp5585: Add Analog Devices ADP5585 support gpio: adp5585: Add Analog Devices ADP5585 support mfd: adp5585: Add Analog Devices ADP5585 core support ... |
||
|
Linus Torvalds
|
7fced2a78a |
Merge tag 'mmc-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add documentation for the mmc-test driver
- Register the eMMC RPMB partition with the RPMB subsystem
- Some various cleanups
MMC host:
- dw_mmc-rockchip: Add support for the RK3576 variant
- renesas_sdhi: Add support for the RZ/V2H(P) variant
- sdhci_am654: Add a retry mechanism for tuning
- sdhci-atmel: Convert DT bindings to json schema
- sdhci-of-dwcmshc:
- Add eMMC HW reset support for BlueField-3 SoC
- Add support for the RK3576 variant
- Add support for the Sophgo SG2042 variant
- sdhci-of-ma35d1: Add new driver for the Nuvoton MA35D1 SDHCI
Misc/Tee:
- Add Replay Protected Memory Block (RPMB) subsystem
- Let optee probe RPMB device using RPMB subsystem"
* tag 'mmc-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (41 commits)
mmc: core: Use dev_err_probe for deferred regulators
optee: Fix a NULL vs IS_ERR() check
mmc: sdhci_am654: Add prints to tuning algorithm
mmc: sdhci_am654: Add retry tuning
dt-bindings: mmc: Add support for rk3576 eMMC
Documentation: mmc: Add mmc-test doc
rpmb: fix error path in rpmb_dev_register()
optee: add RPMB dependency
mmc: block: add RPMB dependency
mmc: core Convert UNSTUFF_BITS macro to inline function
dt-bindings: mmc: sdhci-atmel: Convert to json schema
mmc: core: Convert simple_stroul to kstroul
mmc: core: Calculate size from pointer
mmc: cqhci: Make use of cqhci_halted() routine
mmc: core: Replace the argument of mmc_sd_switch() with defines
mmc: dw_mmc-rockchip: Add support for rk3576 SoCs
mmc: dw_mmc-rockchip: Add internal phase support
dt-bindings: mmc: Add support for rk3576 dw-mshc
mmc: sdhci-of-dwcmshc: Add hw_reset() support for BlueField-3 SoC
mmc: core: remove left-over data structure declarations
...
|
||
|
Linus Torvalds
|
2471d2b3b2 |
Merge tag 'mtd/for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD changes:
- No particularly important patchset this cycle, but we have a few
usual improvements: like using a better/more recent helper or
checking a return value.
Raw NAND changes:
- The use of for_each_child_of_node_scoped() has been spread into the
subsystem drivers
- a couple of exit path have been fixed (mtk, denali)
- TI GPMC bindings have been enhanced to comply with up-to-date
partition descriptions
- a load of small and misc fixes
SPI-NAND changes:
- The most impacting series this cycle is bringing support for
continuous reads in the SPI-NAND subsystem.
This is a feature already merged in the raw NAND subsystem which
allows optimizing the internal fetch times in the chip while
reading sequential pages within an eraseblock.
For now only Macronix NANDs benefit from this feature. While we are
talking about Macronix, some of their chip need an explicit action
for selecting a different plane, and support for it has also been
brought.
- The bitflip threshold has also been set to the same arbitrary level
as in the raw NAND subsystem to optimize wear leveling decisions
- Add upport for a new Winbond chip
SPI NOR changes:
- Add Write Protect support for N25Q064A.
- New flash support for Zetta ZD25Q128C and Spansion S28HS256T.
- Fix a NULL dereference in probe path for flashes without a name.
The probe path tries to access the name without checking its
existence first. S28HS256T is the first flash to define its entry
without a name, uncovering this issue"
* tag 'mtd/for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (41 commits)
mtd: spi-nor: fix flash probing
mtd: spi-nor: spansion: Add support for S28HS256T
mtd: spi-nor: winbond: add Zetta ZD25Q128C support
mtd: spi-nor: micron-st: Add n25q064a WP support
mtd: spi-nor: sst: Factor out common write operation to `sst_nor_write_data()`
mtd: spinand: macronix: Flag parts needing explicit plane select
mtd: spinand: Add support for setting plane select bits
dt-bindings: mtd: ti, gpmc-nand: support partitions node
mtd: rawnand: mtk: Fix init error path
mtd: powernv: Add check devm_kasprintf() returned value
mtd: rawnand: mtk: Factorize out the logic cleaning mtk chips
mtd: rawnand: atmel: Add message on DMA usage
mtd: rawnand: meson: Fix typo in function name
mtd: spi-nand: macronix: Continuous read support
mtd: spi-nand: macronix: Add a possible bitflip status flag
mtd: spi-nand: macronix: Extract the bitflip retrieval logic
mtd: spi-nand: macronix: Fix helper name
mtd: spi-nand: Expose spinand_write_reg_op()
mtd: spi-nand: Add continuous read support
mtd: spi-nand: Isolate the MTD read logic in a helper
...
|
||
|
Linus Torvalds
|
288cb34ead |
Merge tag 'for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- introduce power_supply_show_enum_with_available() helper
- change usb_types from an array into a bitmask
- fix early usage of power_supply_property_is_writeable() resulting
in sysfs files not being writable
- fix missing temp1_max_alarm attribute in power-supply's hwmon
devices
Drivers:
- max1720x: expose nvmem device
- brcmstb: cleanup driver to use latest APIs
- max77693: expose input and charging current limit
- max17042_battery: fix state of charge reading for devices without
current sensing
- axp20x_battery: add AXP717 support
- axp20x_battery: fix min/max voltage properties
- axp20x_usb_power: add AXP717 support
- axp20x_usb_power: add DT based input current limit
Documentation updates
Misc minor cleanups and fixes"
* tag 'for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (38 commits)
power: supply: hwmon: Fix missing temp1_max_alarm attribute
power: supply: Drop use_cnt check from power_supply_property_is_writeable()
power: supply: ab8500: Constify struct kobj_type
power: supply: max1720x: fix a double free on error in probe()
power: supply: axp20x_battery: add support for AXP717
power: supply: axp20x_usb_power: Add support for AXP717
dt-bindings: power: supply: axp20x: Add AXP717 compatible
dt-bindings: power: supply: axp20x: Add AXP717 compatible
power: supply: axp20x_usb_power: Fix spelling mistake "reqested" -> "requested"
power: supply: Change usb_types from an array into a bitmask
power: supply: sysfs: Move power_supply_show_enum_with_available() up
power: supply: sysfs: Add power_supply_show_enum_with_available() helper
power: supply: rt9467-charger: Remove "usb_type" property write support
power: supply: ucs1002: Adjust ucs1002_set_usb_type() to accept string values
power: supply: "usb_type" property may be written to
power: supply: max1720x: add read support for nvmem
mfd: axp20x: Add ADC, BAT, and USB cells for AXP717
power: supply: core: constify psy_tzd_ops
power: reset: brcmstb: Do not go into infinite loop if reset fails
power: reset: brcmstb: Use devm_register_sys_off_handler()
...
|
||
|
Linus Torvalds
|
efdfcd40ad |
Merge tag 'lkmm.2024.09.14b' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull memory model doc updates from Paul McKenney: "lkmm: Add documentation and mailing list This contains documentation updates from Andrea Parri and Akira Yokosawa. Also, there is now an lkmm@lists.linux.dev, and Boqun Feng's update adds this to the LKMM MAINTAINERS entry. Not included are a couple of more commits from Puranjay Mohan adding more atomic operations to LKMM, but these await a herdtools7 release that includes tool-side support for this functionality. With luck, I will send a separate pull request for these later in the merge window" * tag 'lkmm.2024.09.14b' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: MAINTAINERS: Add the dedicated maillist info for LKMM docs/memory-barriers.txt: Remove left-over references to "CACHE COHERENCY" tools/memory-model: simple.txt: Fix stale reference to recipes-pairs.txt tools/memory-model: Add locking.txt and glossary.txt to README tools/memory-model: Document herd7 (abstract) representation |
||
|
Linus Torvalds
|
067610ebaa |
Merge tag 'rcu.release.v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Neeraj Upadhyay:
"Context tracking:
- rename context tracking state related symbols and remove references
to "dynticks" in various context tracking state variables and
related helpers
- force context_tracking_enabled_this_cpu() to be inlined to avoid
leaving a noinstr section
CSD lock:
- enhance CSD-lock diagnostic reports
- add an API to provide an indication of ongoing CSD-lock stall
nocb:
- update and simplify RCU nocb code to handle (de-)offloading of
callbacks only for offline CPUs
- fix RT throttling hrtimer being armed from offline CPU
rcutorture:
- remove redundant rcu_torture_ops get_gp_completed fields
- add SRCU ->same_gp_state and ->get_comp_state functions
- add generic test for NUM_ACTIVE_*RCU_POLL* for testing RCU and SRCU
polled grace periods
- add CFcommon.arch for arch-specific Kconfig options
- print number of update types in rcu_torture_write_types()
- add rcutree.nohz_full_patience_delay testing to the TREE07 scenario
- add a stall_cpu_repeat module parameter to test repeated CPU stalls
- add argument to limit number of CPUs a guest OS can use in
torture.sh
rcustall:
- abbreviate RCU CPU stall warnings during CSD-lock stalls
- Allow dump_cpu_task() to be called without disabling preemption
- defer printing stall-warning backtrace when holding rcu_node lock
srcu:
- make SRCU gp seq wrap-around faster
- add KCSAN checks for concurrent updates to ->srcu_n_exp_nodelay and
->reschedule_count which are used in heuristics governing
auto-expediting of normal SRCU grace periods and
grace-period-state-machine delays
- mark idle SRCU-barrier callbacks to help identify stuck
SRCU-barrier callback
rcu tasks:
- remove RCU Tasks Rude asynchronous APIs as they are no longer used
- stop testing RCU Tasks Rude asynchronous APIs
- fix access to non-existent percpu regions
- check processor-ID assumptions during chosen CPU calculation for
callback enqueuing
- update description of rtp->tasks_gp_seq grace-period sequence
number
- add rcu_barrier_cb_is_done() to identify whether a given
rcu_barrier callback is stuck
- mark idle Tasks-RCU-barrier callbacks
- add *torture_stats_print() functions to print detailed diagnostics
for Tasks-RCU variants
- capture start time of rcu_barrier_tasks*() operation to help
distinguish a hung barrier operation from a long series of barrier
operations
refscale:
- add a TINY scenario to support tests of Tiny RCU and Tiny
SRCU
- optimize process_durations() operation
rcuscale:
- dump stacks of stalled rcu_scale_writer() instances and
grace-period statistics when rcu_scale_writer() stalls
- mark idle RCU-barrier callbacks to identify stuck RCU-barrier
callbacks
- print detailed grace-period and barrier diagnostics on
rcu_scale_writer() hangs for Tasks-RCU variants
- warn if async module parameter is specified for RCU implementations
that do not have async primitives such as RCU Tasks Rude
- make all writer tasks report upon hang
- tolerate repeated GFP_KERNEL failure in rcu_scale_writer()
- use special allocator for rcu_scale_writer()
- NULL out top-level pointers to heap memory to avoid double-free
bugs on modprobe failures
- maintain per-task instead of per-CPU callbacks count to avoid any
issues with migration of either tasks or callbacks
- constify struct ref_scale_ops
Fixes:
- use system_unbound_wq for kfree_rcu work to avoid disturbing
isolated CPUs
Misc:
- warn on unexpected rcu_state.srs_done_tail state
- better define "atomic" for list_replace_rcu() and
hlist_replace_rcu() routines
- annotate struct kvfree_rcu_bulk_data with __counted_by()"
* tag 'rcu.release.v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (90 commits)
rcu: Defer printing stall-warning backtrace when holding rcu_node lock
rcu/nocb: Remove superfluous memory barrier after bypass enqueue
rcu/nocb: Conditionally wake up rcuo if not already waiting on GP
rcu/nocb: Fix RT throttling hrtimer armed from offline CPU
rcu/nocb: Simplify (de-)offloading state machine
context_tracking: Tag context_tracking_enabled_this_cpu() __always_inline
context_tracking, rcu: Rename rcu_dyntick trace event into rcu_watching
rcu: Update stray documentation references to rcu_dynticks_eqs_{enter, exit}()
rcu: Rename rcu_momentary_dyntick_idle() into rcu_momentary_eqs()
rcu: Rename rcu_implicit_dynticks_qs() into rcu_watching_snap_recheck()
rcu: Rename dyntick_save_progress_counter() into rcu_watching_snap_save()
rcu: Rename struct rcu_data .exp_dynticks_snap into .exp_watching_snap
rcu: Rename struct rcu_data .dynticks_snap into .watching_snap
rcu: Rename rcu_dynticks_zero_in_eqs() into rcu_watching_zero_in_eqs()
rcu: Rename rcu_dynticks_in_eqs_since() into rcu_watching_snap_stopped_since()
rcu: Rename rcu_dynticks_in_eqs() into rcu_watching_snap_in_eqs()
rcu: Rename rcu_dynticks_eqs_online() into rcu_watching_online()
context_tracking, rcu: Rename rcu_dynticks_curr_cpu_in_eqs() into rcu_is_watching_curr_cpu()
context_tracking, rcu: Rename rcu_dynticks_task*() into rcu_task*()
refscale: Constify struct ref_scale_ops
...
|
||
|
Linus Torvalds
|
85a77db95a |
Merge tag 'wq-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue updates from Tejun Heo: "Nothing major: - workqueue.panic_on_stall boot param added - alloc_workqueue_lockdep_map() added (used by DRM) - Other cleanusp and doc updates" * tag 'wq-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: kernel/workqueue.c: fix DEFINE_PER_CPU_SHARED_ALIGNED expansion workqueue: Fix another htmldocs build warning workqueue: fix null-ptr-deref on __alloc_workqueue() error workqueue: Don't call va_start / va_end twice workqueue: Fix htmldocs build warning workqueue: Add interface for user-defined workqueue lockdep map workqueue: Change workqueue lockdep map to pointer workqueue: Split alloc_workqueue into internal function and lockdep init Documentation: kernel-parameters: add workqueue.panic_on_stall workqueue: add cmdline parameter workqueue.panic_on_stall |
||
|
Linus Torvalds
|
78567e2bc7 |
Merge tag 'cgroup-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo: - cpuset isolation improvements - cpuset cgroup1 support is split into its own file behind the new config option CONFIG_CPUSET_V1. This makes it the second controller which makes cgroup1 support optional after memcg - Handling of unavailable v1 controller handling improved during cgroup1 mount operations - union_find applied to cpuset. It makes code simpler and more efficient - Reduce spurious events in pids.events - Cleanups and other misc changes - Contains a merge of cgroup/for-6.11-fixes to receive cpuset fixes that further changes build upon * tag 'cgroup-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (34 commits) cgroup: Do not report unavailable v1 controllers in /proc/cgroups cgroup: Disallow mounting v1 hierarchies without controller implementation cgroup/cpuset: Expose cpuset filesystem with cpuset v1 only cgroup/cpuset: Move cpu.h include to cpuset-internal.h cgroup/cpuset: add sefltest for cpuset v1 cgroup/cpuset: guard cpuset-v1 code under CONFIG_CPUSETS_V1 cgroup/cpuset: rename functions shared between v1 and v2 cgroup/cpuset: move v1 interfaces to cpuset-v1.c cgroup/cpuset: move validate_change_legacy to cpuset-v1.c cgroup/cpuset: move legacy hotplug update to cpuset-v1.c cgroup/cpuset: add callback_lock helper cgroup/cpuset: move memory_spread to cpuset-v1.c cgroup/cpuset: move relax_domain_level to cpuset-v1.c cgroup/cpuset: move memory_pressure to cpuset-v1.c cgroup/cpuset: move common code to cpuset-internal.h cgroup/cpuset: introduce cpuset-v1.c selftest/cgroup: Make test_cpuset_prs.sh deal with pre-isolated CPUs cgroup/cpuset: Account for boot time isolated CPUs cgroup/cpuset: remove use_parent_ecpus of cpuset cgroup/cpuset: remove fetch_xcpus ... |
||
|
Linus Torvalds
|
2f27fce671 |
Merge tag 'sound-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"A fairly big update at this time, both in core and driver sides.
The core received rewrites in PCM buffer allocation handling and
locking optimizations, PCM rate updates followed by lots of cleanups.
In ASoC side, the legacy Intel drivers have been deprecated by AVS
drivers which leaded to the significant amount of code reduction.
SoundWire driver updates and other cleanups contributed more code
reduction, too.
USB-audio driver received a large cleanup of its big quirk table, and
the old snd_print*() API usages in many legacy drivers are replaced
with the standard print API.
Here are some highlights:
Core:
- More optimized locking in ALSA control code
- Rewrites of memalloc helpers for better DMA API usage
- Drop of obsoleted vmalloc PCM buffer helper API
- Continued MIDI2 UMP updates
- Support of a new user-space driven timer instance
- Update for more PCM support rates and cleanups
- Xrun counter report in the proc files
ASoC:
- Continued simplification and cleanup works for ASoC
- Extensive cleanups and refactoring of the Soundwire drivers
- Removal of Intel machine support obsoleted by the AVS driver
- Lots of DT schema conversions
- Machine support for many AMD and Intel x86 platforms
- Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek
RTL1320 SoundWire and rev C, and Texas Instruments TAS2563
USB-audio:
- Add support of multiple control interfaces
- A large rewrite of quirk table with macros
- Support for RME Digiface USB
HD-audio:
- Cleanup of quirk code for Samsung Galaxy laptops
- Clean up of detection of Cirrus codecs
- C-Media CM9825 HD-audio codec support
Others:
- Rewrites to standard print API in a lot of legacy drivers"
* tag 'sound-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (410 commits)
ASoC: topology: Fix redundant logical jump
ASoC: tas2781: Add Calibration Kcontrols for Chromebook
ASoC: amd: acp: refactor SoundWire machine driver code
ASoC: sdw_utils/intel: move soundwire endpoint parsing helper functions
ASoC: sdw_util/intel: move soundwire endpoint and dai link structures
ASoC: intel: sof_sdw: rename soundwire parsing helper functions
ASoC: intel: sof_sdw: rename soundwire endpoint and dailink structures
ASoC: atmel: mchp-pdmc: Retain Non-Runtime Controls
ALSA: hda/realtek: Add support for Galaxy Book2 Pro (NP950XEE)
ASoC: mediatek: mt7986-afe-pcm: Remove redundant error message
ALSA: memalloc: Use proper DMA mapping API for x86 S/G buffer allocations
ALSA: memalloc: Use proper DMA mapping API for x86 WC buffer allocations
ALSA: usb-audio: Add logitech Audio profile quirk
ASoc: mediatek: mt8365: Remove unneeded assignment
ASoC: Intel: ARL: Add entry for HDMI-In capture support to non-I2S codec boards.
ASoC: Intel: sof_rt5682: Add HDMI-In capture with rt5682 support for ARL.
ASoC: SOF: Intel: hda: remove common_hdmi_codec_drv
ASoC: Intel: sof_pcm512x: do not check common_hdmi_codec_drv
ASoC: Intel: ehl_rt5660: do not check common_hdmi_codec_drv
ASoC: Intel: skl_hda_dsp_generic: use common module for DAI links
...
|
||
|
Linus Torvalds
|
194fcd20eb |
Merge tag 'linux_kselftest-kunit-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan: - a new int_pow test suite - documentation update to clarify filename best practices - kernel-doc fix for EXPORT_SYMBOL_IF_KUNIT - change to build compile_commands.json automatically instead of requiring a manual build * tag 'linux_kselftest-kunit-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: lib/math: Add int_pow test suite kunit: tool: Build compile_commands.json kunit: Fix kernel-doc for EXPORT_SYMBOL_IF_KUNIT Documentation: KUnit: Update filename best practices |
||
|
Linus Torvalds
|
d58db3f3a0 |
Merge tag 'docs-6.12' of git://git.lwn.net/linux
Pull documentation update from Jonathan Corbet: "Another relatively mundane cycle for docs: - The beginning of an EEVDF scheduler document - More Chinese translations - A rethrashing of our bisection documentation ...plus the usual array of smaller fixes, and more than the usual number of typo fixes" * tag 'docs-6.12' of git://git.lwn.net/linux: (48 commits) Remove duplicate "and" in 'Linux NVMe docs. docs:filesystems: fix spelling and grammar mistakes docs:filesystem: fix mispelled words on autofs page docs:mm: fixed spelling and grammar mistakes on vmalloc kernel stack page Documentation: PCI: fix typo in pci.rst docs/zh_CN: add the translation of kbuild/gcc-plugins.rst docs/process: fix typos docs:mm: fix spelling mistakes in heterogeneous memory management page accel/qaic: Fix a typo docs/zh_CN: update the translation of security-bugs docs: block: Fix grammar and spelling mistakes in bfq-iosched.rst Documentation: Fix spelling mistakes Documentation/gpu: Fix typo in Documentation/gpu/komeda-kms.rst scripts: sphinx-pre-install: remove unnecessary double check for $cur_version Loongarch: KVM: Add KVM hypercalls documentation for LoongArch Documentation: Document the kernel flag bdev_allow_write_mounted docs: scheduler: completion: Update member of struct completion docs: kerneldoc-preamble.sty: Suppress extra spaces in CJK literal blocks docs: submitting-patches: Advertise b4 docs: update dev-tools/kcsan.rst url about KTSAN ... |
||
|
Linus Torvalds
|
b8979c6b4d |
Merge tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates seem larger this time around, with changes is many
of the SoC specific drivers, both the custom drivers/soc ones and the
closely related subsystems (memory, bus, firmware, reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and power
management code. This is the latest variant of one of the oldest still
supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in
many of their drivers to add more features and additional SoC support.
Most of these are somewhat firmware related as the platform has a
number of firmware based interfaces to the kernel. A notable addition
here is the inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly
cleanups.
The Arm SCMI firmware driver gets a major rework to modularize the
existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a number
of smaller updates.
The Arm FF-A firmware driver gets a feature update to support the v1.2
version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring for
Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra,
amlogic, mediatek) drivers and their DT bindings"
* tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (212 commits)
firmware: imx: remove duplicate scmi_imx_misc_ctrl_get()
platform: cznic: turris-omnia-mcu: Fix error check in omnia_mcu_register_trng()
bus: sunxi-rsb: Simplify code with dev_err_probe()
soc: fsl: qe: ucc: Export ucc_mux_set_grant_tsa_bkpt
soc: fsl: cpm1: qmc: Fix dependency on fsl_soc.h
dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
soc: fsl: qbman: Remove redundant warnings
soc: fsl: qbman: Use iommu_paging_domain_alloc()
MAINTAINERS: Add QE files related to the Freescale QMC controller
soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware
soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation
soc: fsl: qe: Add missing PUSHSCHED command
soc: fsl: qe: Add resource-managed muram allocators
soc: fsl: cpm1: qmc: Introduce qmc_version
soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC
soc: fsl: cpm1: qmc: Handle RPACK initialization
soc: fsl: cpm1: qmc: Rename qmc_chan_command()
soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their CPM1 version
soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version
soc: fsl: cpm1: qmc: Re-order probe() operations
...
|
||
|
Linus Torvalds
|
7b17f5ebd5 |
Merge tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"New SoC support for Broadcom bcm2712 (Raspberry Pi 5) and Renesas
R9A09G057 (RZ/V2H(P)) and Qualcomm Snapdragon 414 (MSM8929), all three
of these are variants of already supported chips, in particular the
last one is almost identical to MSM8939.
Lots of updates to Mediatek, ASpeed, Rockchips, Amlogic, Qualcomm,
STM32, NXP i.MX, Sophgo, TI K3, Renesas, Microchip at91, NVIDIA Tegra,
and T-HEAD.
The added Qualcomm platform support once again dominates the changes,
with seven phones and three laptops getting added in addition to many
new features on existing machines. The Snapdragon X1E support
specifically keeps improving.
The other new machines are:
- eight new machines using various 64-bit Rockchips SoCs, both on the
consumer/gaming side and developer boards
- three industrial boards with 64-bit i.MX, which is a very low
number for them.
- four more servers using a 32-bit Speed BMC
- three boards using STM32MP1 SoCs
- one new machine each using allwinner, amlogic, broadcom and renesas
chips"
* tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (672 commits)
arm64: dts: allwinner: h5: NanoPi NEO Plus2: Use regulators for pio
arm64: dts: mediatek: add audio support for mt8365-evk
arm64: dts: mediatek: add afe support for mt8365 SoC
arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface
arm64: dts: mediatek: mt8186: Add svs node
arm64: dts: mediatek: mt8186: Add power domain for DPI
arm64: dts: mediatek: mt8195: Correct clock order for dp_intf*
arm64: dts: mt8183: add dpi node to mt8183
arm64: dts: allwinner: h5: NanoPi Neo Plus2: Fix regulators
arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board
arm64: dts: rockchip: add CAN-FD controller nodes to rk3568
arm64: dts: nuvoton: ma35d1: Add uart pinctrl settings
arm64: dts: nuvoton: ma35d1: Add pinctrl and gpio nodes
arm64: dts: nuvoton: Add syscon to the system-management node
ARM: dts: Fix undocumented LM75 compatible nodes
arm64: dts: toshiba: Fix pl011 and pl022 clocks
ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Add MECIO1 and MECT1S board variants
...
|
||
|
Linus Torvalds
|
303ba85c60 |
Merge tag 'spi-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This is quite a quiet release for SPI. The one new core feature here
is support for configuring the state of the MOSI pin when the bus is
idle, there are some devices which are very fragile in this regard
even when the chip select signal is not asserted. Otherwise we have
some new driver support, a bunch of small fixes and some general
cleanup work.
- Support for configuring the state of the MOSI pin when the the bus
is idle
- Add the Elgin JG0309-01 in spidev
- Support for Marvell xSPI, Mediatek MTK7981, Microchip PIC64GX, NXP
i.MX8ULP, and Rockchip RK3576 controllers
I also accidentally pulled in an IIO DT bindings update due to a typo
when applying the MOSI idle state patches"
* tag 'spi-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (65 commits)
spi: geni-qcom: Use devm functions to simplify code
spi: remove spi_controller_is_slave() and spi_slave_abort()
platform/olpc: olpc-xo175-ec: switch to use spi_target_abort().
spi: slave-mt27xx: switch to use target_abort
spi: spidev: switch to use spi_target_abort()
spi: slave-system-control: switch to use spi_target_abort()
spi: slave-time: switch to use spi_target_abort()
spi: switch to use spi_controller_is_target()
spi: fspi: add support for imx8ulp
spi: fspi: involve lut_num for struct nxp_fspi_devtype_data
dt-bindings: spi: nxp-fspi: add imx8ulp support
spi: spidev_fdx: Fix the wrong format specifier
spi: mxs: Switch to RUNTIME/SYSTEM_SLEEP_PM_OPS()
spi: dt-bindings: Add rockchip,rk3576-spi compatible
spi: Revert "spi: Insert the missing pci_dev_put()before return"
spi: zynq-qspi: Replace kzalloc with kmalloc for buffer allocation
spi: ppc4xx: Sort headers
spi: ppc4xx: Revert "handle irq_of_parse_and_map() errors"
spi: zynqmp-gqspi: Simplify with dev_err_probe()
spi: zynqmp-gqspi: Use devm_spi_alloc_host()
...
|
||
|
Linus Torvalds
|
6df9280860 |
Merge tag 'regulator-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This release is almost all cleanup work of various kinds, while the
diffstat for the core is quite large this is almost all cleanups and
documentation improvments with some small fixes rather than any new
feature work. We do have support for a couple of new devices but these
are small additions to existing drivers rather than new drivers.
- Removal of the SM5703 driver which does not have it's dependencies
available.
- Support for Allwinner AXP717, and Qualcomm WCN6855.
The Allwinner support shares some commits with the MFD tree"
* tag 'regulator-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (66 commits)
regulator: sm5703: Remove because it is unused and fails to build
regulator: Split up _regulator_get()
regulator: update some comments ([gs]et_voltage_vsel vs [gs]et_voltage_sel)
regulator: max8973: Use irq_get_trigger_type() helper
regulator: core: fix the broken behavior of regulator_dev_lookup()
regulator: max77650: Use container_of and constify static data
regulator: hi6421v530: Use container_of and constify static data
regulator: hi6421v530: Drop unused 'eco_microamp'
regulator: qcom-refgen: Constify static data
regulator: pfuze100: Constify static data
regulator: pcap: Constify static data
regulator: mtk-dvfsrc: Constify static data
regulator: max77826: Constify static data
regulator: max77826: Drop unused 'rdesc' in 'struct max77826_regulator_info'
regulator: tps65023: Constify static data
regulator: hi6421v600: Constify static data
regulator: hi6421: Constify static data
regulator: da9121: Constify static data
regulator: da9063: Constify static data
regulator: da9055: Constify static data
...
|
||
|
Linus Torvalds
|
9ea925c806 |
Merge tag 'timers-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Core:
- Overhaul of posix-timers in preparation of removing the workaround
for periodic timers which have signal delivery ignored.
- Remove the historical extra jiffie in msleep()
msleep() adds an extra jiffie to the timeout value to ensure
minimal sleep time. The timer wheel ensures minimal sleep time
since the large rewrite to a non-cascading wheel, but the extra
jiffie in msleep() remained unnoticed. Remove it.
- Make the timer slack handling correct for realtime tasks.
The procfs interface is inconsistent and does neither reflect
reality nor conforms to the man page. Show the correct 0 slack for
real time tasks and enforce it at the core level instead of having
inconsistent individual checks in various timer setup functions.
- The usual set of updates and enhancements all over the place.
Drivers:
- Allow the ACPI PM timer to be turned off during suspend
- No new drivers
- The usual updates and enhancements in various drivers"
* tag 'timers-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
ntp: Make sure RTC is synchronized when time goes backwards
treewide: Fix wrong singular form of jiffies in comments
cpu: Use already existing usleep_range()
timers: Rename next_expiry_recalc() to be unique
platform/x86:intel/pmc: Fix comment for the pmc_core_acpi_pm_timer_suspend_resume function
clocksource/drivers/jcore: Use request_percpu_irq()
clocksource/drivers/cadence-ttc: Add missing clk_disable_unprepare in ttc_setup_clockevent
clocksource/drivers/asm9260: Add missing clk_disable_unprepare in asm9260_timer_init
clocksource/drivers/qcom: Add missing iounmap() on errors in msm_dt_timer_init()
clocksource/drivers/ingenic: Use devm_clk_get_enabled() helpers
platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended
clocksource: acpi_pm: Add external callback for suspend/resume
clocksource/drivers/arm_arch_timer: Using for_each_available_child_of_node_scoped()
dt-bindings: timer: rockchip: Add rk3576 compatible
timers: Annotate possible non critical data race of next_expiry
timers: Remove historical extra jiffie for timeout in msleep()
hrtimer: Use and report correct timerslack values for realtime tasks
hrtimer: Annotate hrtimer_cpu_base_.*_expiry() for sparse.
timers: Add sparse annotation for timer_sync_wait_running().
signal: Replace BUG_ON()s
...
|
||
|
Linus Torvalds
|
cb69d86550 |
Merge tag 'irq-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Core:
- Remove a global lock in the affinity setting code
The lock protects a cpumask for intermediate results and the lock
causes a bottleneck on simultaneous start of multiple virtual
machines. Replace the lock and the static cpumask with a per CPU
cpumask which is nicely serialized by raw spinlock held when
executing this code.
- Provide support for giving a suffix to interrupt domain names.
That's required to support devices with subfunctions so that the
domain names are distinct even if they originate from the same
device node.
- The usual set of cleanups and enhancements all over the place
Drivers:
- Support for longarch AVEC interrupt chip
- Refurbishment of the Armada driver so it can be extended for new
variants.
- The usual set of cleanups and enhancements all over the place"
* tag 'irq-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
genirq: Use cpumask_intersects()
genirq/cpuhotplug: Use cpumask_intersects()
irqchip/apple-aic: Only access system registers on SoCs which provide them
irqchip/apple-aic: Add a new "Global fast IPIs only" feature level
irqchip/apple-aic: Skip unnecessary enabling of use_fast_ipi
dt-bindings: apple,aic: Document A7-A11 compatibles
irqdomain: Use IS_ERR_OR_NULL() in irq_domain_trim_hierarchy()
genirq/msi: Use kmemdup_array() instead of kmemdup()
genirq/proc: Change the return value for set affinity permission error
genirq/proc: Use irq_move_pending() in show_irq_affinity()
genirq/proc: Correctly set file permissions for affinity control files
genirq: Get rid of global lock in irq_do_set_affinity()
genirq: Fix typo in struct comment
irqchip/loongarch-avec: Add AVEC irqchip support
irqchip/loongson-pch-msi: Prepare get_pch_msi_handle() for AVECINTC
irqchip/loongson-eiointc: Rename CPUHP_AP_IRQ_LOONGARCH_STARTING
LoongArch: Architectural preparation for AVEC irqchip
LoongArch: Move irqchip function prototypes to irq-loongson.h
irqchip/loongson-pch-msi: Switch to MSI parent domains
softirq: Remove unused 'action' parameter from action callback
...
|
||
|
Linus Torvalds
|
a430d95c5e |
Merge tag 'lsm-pr-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore: - Move the LSM framework to static calls This transitions the vast majority of the LSM callbacks into static calls. Those callbacks which haven't been converted were left as-is due to the general ugliness of the changes required to support the static call conversion; we can revisit those callbacks at a future date. - Add the Integrity Policy Enforcement (IPE) LSM This adds a new LSM, Integrity Policy Enforcement (IPE). There is plenty of documentation about IPE in this patches, so I'll refrain from going into too much detail here, but the basic motivation behind IPE is to provide a mechanism such that administrators can restrict execution to only those binaries which come from integrity protected storage, e.g. a dm-verity protected filesystem. You will notice that IPE requires additional LSM hooks in the initramfs, dm-verity, and fs-verity code, with the associated patches carrying ACK/review tags from the associated maintainers. We couldn't find an obvious maintainer for the initramfs code, but the IPE patchset has been widely posted over several years. Both Deven Bowers and Fan Wu have contributed to IPE's development over the past several years, with Fan Wu agreeing to serve as the IPE maintainer moving forward. Once IPE is accepted into your tree, I'll start working with Fan to ensure he has the necessary accounts, keys, etc. so that he can start submitting IPE pull requests to you directly during the next merge window. - Move the lifecycle management of the LSM blobs to the LSM framework Management of the LSM blobs (the LSM state buffers attached to various kernel structs, typically via a void pointer named "security" or similar) has been mixed, some blobs were allocated/managed by individual LSMs, others were managed by the LSM framework itself. Starting with this pull we move management of all the LSM blobs, minus the XFRM blob, into the framework itself, improving consistency across LSMs, and reducing the amount of duplicated code across LSMs. Due to some additional work required to migrate the XFRM blob, it has been left as a todo item for a later date; from a practical standpoint this omission should have little impact as only SELinux provides a XFRM LSM implementation. - Fix problems with the LSM's handling of F_SETOWN The LSM hook for the fcntl(F_SETOWN) operation had a couple of problems: it was racy with itself, and it was disconnected from the associated DAC related logic in such a way that the LSM state could be updated in cases where the DAC state would not. We fix both of these problems by moving the security_file_set_fowner() hook into the same section of code where the DAC attributes are updated. Not only does this resolve the DAC/LSM synchronization issue, but as that code block is protected by a lock, it also resolve the race condition. - Fix potential problems with the security_inode_free() LSM hook Due to use of RCU to protect inodes and the placement of the LSM hook associated with freeing the inode, there is a bit of a challenge when it comes to managing any LSM state associated with an inode. The VFS folks are not open to relocating the LSM hook so we have to get creative when it comes to releasing an inode's LSM state. Traditionally we have used a single LSM callback within the hook that is triggered when the inode is "marked for death", but not actually released due to RCU. Unfortunately, this causes problems for LSMs which want to take an action when the inode's associated LSM state is actually released; so we add an additional LSM callback, inode_free_security_rcu(), that is called when the inode's LSM state is released in the RCU free callback. - Refactor two LSM hooks to better fit the LSM return value patterns The vast majority of the LSM hooks follow the "return 0 on success, negative values on failure" pattern, however, there are a small handful that have unique return value behaviors which has caused confusion in the past and makes it difficult for the BPF verifier to properly vet BPF LSM programs. This includes patches to convert two of these"special" LSM hooks to the common 0/-ERRNO pattern. - Various cleanups and improvements A handful of patches to remove redundant code, better leverage the IS_ERR_OR_NULL() helper, add missing "static" markings, and do some minor style fixups. * tag 'lsm-pr-20240911' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (40 commits) security: Update file_set_fowner documentation fs: Fix file_set_fowner LSM hook inconsistencies lsm: Use IS_ERR_OR_NULL() helper function lsm: remove LSM_COUNT and LSM_CONFIG_COUNT ipe: Remove duplicated include in ipe.c lsm: replace indirect LSM hook calls with static calls lsm: count the LSMs enabled at compile time kernel: Add helper macros for loop unrolling init/main.c: Initialize early LSMs after arch code, static keys and calls. MAINTAINERS: add IPE entry with Fan Wu as maintainer documentation: add IPE documentation ipe: kunit test for parser scripts: add boot policy generation program ipe: enable support for fs-verity as a trust provider fsverity: expose verified fsverity built-in signatures to LSMs lsm: add security_inode_setintegrity() hook ipe: add support for dm-verity as a trust provider dm-verity: expose root hash digest and signature data to LSMs block,lsm: add LSM blob and new LSM hooks for block devices ipe: add permissive toggle ... |
||
|
George Stark
|
a4cf667d77 |
dt-bindings: pwm: amlogic: Add new bindings for meson A1 PWM
The chip has 3 dual-channel PWM modules PWM_AB, PWM_CD, PWM_EF. Signed-off-by: George Stark <gnstark@salutedevices.com> Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com> Acked-by: Conor Dooley <conor@kernel.org> Link: https://lore.kernel.org/r/20240710234116.2370655-3-gnstark@salutedevices.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org> |
||
|
George Stark
|
6e50721426 |
dt-bindings: pwm: amlogic: Add optional power-domains
On newer SoCs, the PWM hardware can require a power domain to operate so add corresponding optional property. Signed-off-by: George Stark <gnstark@salutedevices.com> Acked-by: Conor Dooley <conor@kernel.org> Link: https://lore.kernel.org/r/20240710234116.2370655-2-gnstark@salutedevices.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org> |
||
|
Krzysztof Kozlowski
|
edeedfaa0c |
dt-bindings: pwm: allwinner,sun4i-a10-pwm: add top-level constraints
Properties with variable number of items per each device are expected to have widest constraints in top-level "properties:" block and further customized (narrowed) in "if:then:". Add missing top-level constraints for clock-names. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20240818172828.121728-1-krzysztof.kozlowski@linaro.org Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org> |
||
|
Uwe Kleine-König
|
4c82005f17 |
Merge tag 'ib-mfd-gpio-pwm-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Immutable branch between MFD, GPIO and PWM due for the v6.12 merge window |
||
|
Linus Torvalds
|
35219bc5c7 |
Merge tag 'vfs-6.12.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"This contains the work to improve read/write performance for the new
netfs library.
The main performance enhancing changes are:
- Define a structure, struct folio_queue, and a new iterator type,
ITER_FOLIOQ, to hold a buffer as a replacement for ITER_XARRAY. See
that patch for questions about naming and form.
ITER_FOLIOQ is provided as a replacement for ITER_XARRAY. The
problem with an xarray is that accessing it requires the use of a
lock (typically the RCU read lock) - and this means that we can't
supply iterate_and_advance() with a step function that might sleep
(crypto for example) without having to drop the lock between pages.
ITER_FOLIOQ is the iterator for a chain of folio_queue structs,
where each folio_queue holds a small list of folios. A folio_queue
struct is a simpler structure than xarray and is not subject to
concurrent manipulation by the VM. folio_queue is used rather than
a bvec[] as it can form lists of indefinite size, adding to one end
and removing from the other on the fly.
- Provide a copy_folio_from_iter() wrapper.
- Make cifs RDMA support ITER_FOLIOQ.
- Use folio queues in the write-side helpers instead of xarrays.
- Add a function to reset the iterator in a subrequest.
- Simplify the write-side helpers to use sheaves to skip gaps rather
than trying to work out where gaps are.
- In afs, make the read subrequests asynchronous, putting them into
work items to allow the next patch to do progressive
unlocking/reading.
- Overhaul the read-side helpers to improve performance.
- Fix the caching of a partial block at the end of a file.
- Allow a store to be cancelled.
Then some changes for cifs to make it use folio queues instead of
xarrays for crypto bufferage:
- Use raw iteration functions rather than manually coding iteration
when hashing data.
- Switch to using folio_queue for crypto buffers.
- Remove the xarray bits.
Make some adjustments to the /proc/fs/netfs/stats file such that:
- All the netfs stats lines begin 'Netfs:' but change this to
something a bit more useful.
- Add a couple of stats counters to track the numbers of skips and
waits on the per-inode writeback serialisation lock to make it
easier to check for this as a source of performance loss.
Miscellaneous work:
- Ensure that the sb_writers lock is taken around
vfs_{set,remove}xattr() in the cachefiles code.
- Reduce the number of conditional branches in netfs_perform_write().
- Move the CIFS_INO_MODIFIED_ATTR flag to the netfs_inode struct and
remove cifs_post_modify().
- Move the max_len/max_nr_segs members from netfs_io_subrequest to
netfs_io_request as they're only needed for one subreq at a time.
- Add an 'unknown' source value for tracing purposes.
- Remove NETFS_COPY_TO_CACHE as it's no longer used.
- Set the request work function up front at allocation time.
- Use bh-disabling spinlocks for rreq->lock as cachefiles completion
may be run from block-filesystem DIO completion in softirq context.
- Remove fs/netfs/io.c"
* tag 'vfs-6.12.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (25 commits)
docs: filesystems: corrected grammar of netfs page
cifs: Don't support ITER_XARRAY
cifs: Switch crypto buffer to use a folio_queue rather than an xarray
cifs: Use iterate_and_advance*() routines directly for hashing
netfs: Cancel dirty folios that have no storage destination
cachefiles, netfs: Fix write to partial block at EOF
netfs: Remove fs/netfs/io.c
netfs: Speed up buffered reading
afs: Make read subreqs async
netfs: Simplify the writeback code
netfs: Provide an iterator-reset function
netfs: Use new folio_queue data type and iterator instead of xarray iter
cifs: Provide the capability to extract from ITER_FOLIOQ to RDMA SGEs
iov_iter: Provide copy_folio_from_iter()
mm: Define struct folio_queue and ITER_FOLIOQ to handle a sequence of folios
netfs: Use bh-disabling spinlocks for rreq->lock
netfs: Set the request work function upon allocation
netfs: Remove NETFS_COPY_TO_CACHE
netfs: Reserve netfs_sreq_source 0 as unset/unknown
netfs: Move max_len/max_nr_segs from netfs_io_subrequest to netfs_io_stream
...
|
||
|
Linus Torvalds
|
e8fc317dfc |
Merge tag 'vfs-6.12.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull procfs updates from Christian Brauner:
"This contains the following changes for procfs:
- Add config options and parameters to block forcing memory writes.
This adds a Kconfig option and boot param to allow removing the
FOLL_FORCE flag from /proc/<pid>/mem write calls as this can be
used in various attacks.
The traditional forcing behavior is kept as default because it can
break GDB and some other use cases.
This is the simpler version that you had requested.
- Restrict overmounting of ephemeral entities.
It is currently possible to mount on top of various ephemeral
entities in procfs. This specifically includes magic links. To
recap, magic links are links of the form /proc/<pid>/fd/<nr>. They
serve as references to a target file and during path lookup they
cause a jump to the target path. Such magic links disappear if the
corresponding file descriptor is closed.
Currently it is possible to overmount such magic links. This is
mostly interesting for an attacker that wants to somehow trick a
process into e.g., reopening something that it didn't intend to
reopen or to hide a malicious file descriptor.
But also it risks leaking mounts for long-running processes. When
overmounting a magic link like above, the mount will not be
detached when the file descriptor is closed. Only the target
mountpoint will disappear. Which has the consequence of making it
impossible to unmount that mount afterwards. So the mount will
stick around until the process exits and the /proc/<pid>/ directory
is cleaned up during proc_flush_pid() when the dentries are pruned
and invalidated.
That in turn means it's possible for a program to accidentally leak
mounts and it's also possible to make a task leak mounts without
it's knowledge if the attacker just keeps overmounting things under
/proc/<pid>/fd/<nr>.
Disallow overmounting of such ephemeral entities.
- Cleanup the readdir method naming in some procfs file operations.
- Replace kmalloc() and strcpy() with a simple kmemdup() call"
* tag 'vfs-6.12.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
proc: fold kmalloc() + strcpy() into kmemdup()
proc: block mounting on top of /proc/<pid>/fdinfo/*
proc: block mounting on top of /proc/<pid>/fd/*
proc: block mounting on top of /proc/<pid>/map_files/*
proc: add proc_splice_unmountable()
proc: proc_readfdinfo() -> proc_fdinfo_iterate()
proc: proc_readfd() -> proc_fd_iterate()
proc: add config & param to block forcing mem writes
|
||
|
Linus Torvalds
|
2775df6e5e |
Merge tag 'vfs-6.12.folio' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs folio updates from Christian Brauner: "This contains work to port write_begin and write_end to rely on folios for various filesystems. This converts ocfs2, vboxfs, orangefs, jffs2, hostfs, fuse, f2fs, ecryptfs, ntfs3, nilfs2, reiserfs, minixfs, qnx6, sysv, ufs, and squashfs. After this series lands a bunch of the filesystems in this list do not mention struct page anymore" * tag 'vfs-6.12.folio' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (61 commits) Squashfs: Ensure all readahead pages have been used Squashfs: Rewrite and update squashfs_readahead_fragment() to not use page->index Squashfs: Update squashfs_readpage_block() to not use page->index Squashfs: Update squashfs_readahead() to not use page->index Squashfs: Update page_actor to not use page->index jffs2: Use a folio in jffs2_garbage_collect_dnode() jffs2: Convert jffs2_do_readpage_nolock to take a folio buffer: Convert __block_write_begin() to take a folio ocfs2: Convert ocfs2_write_zero_page to use a folio fs: Convert aops->write_begin to take a folio fs: Convert aops->write_end to take a folio vboxsf: Use a folio in vboxsf_write_end() orangefs: Convert orangefs_write_begin() to use a folio orangefs: Convert orangefs_write_end() to use a folio jffs2: Convert jffs2_write_begin() to use a folio jffs2: Convert jffs2_write_end() to use a folio hostfs: Convert hostfs_write_end() to use a folio fuse: Convert fuse_write_begin() to use a folio fuse: Convert fuse_write_end() to use a folio f2fs: Convert f2fs_write_begin() to use a folio ... |
||
|
Linus Torvalds
|
8f72c31f45 |
Merge tag 'vfs-6.12.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual pile of misc updates:
Features:
- Add F_CREATED_QUERY fcntl() that allows userspace to query whether
a file was actually created. Often userspace wants to know whether
an O_CREATE request did actually create a file without using
O_EXCL. The current logic is that to first attempts to open the
file without O_CREAT | O_EXCL and if ENOENT is returned userspace
tries again with both flags. If that succeeds all is well. If it
now reports EEXIST it retries.
That works fairly well but some corner cases make this more
involved. If this operates on a dangling symlink the first openat()
without O_CREAT | O_EXCL will return ENOENT but the second openat()
with O_CREAT | O_EXCL will fail with EEXIST.
The reason is that openat() without O_CREAT | O_EXCL follows the
symlink while O_CREAT | O_EXCL doesn't for security reasons. So
it's not something we can really change unless we add an explicit
opt-in via O_FOLLOW which seems really ugly.
All available workarounds are really nasty (fanotify, bpf lsm etc)
so add a simple fcntl().
- Try an opportunistic lookup for O_CREAT. Today, when opening a file
we'll typically do a fast lookup, but if O_CREAT is set, the kernel
always takes the exclusive inode lock. This was likely done with
the expectation that O_CREAT means that we always expect to do the
create, but that's often not the case. Many programs set O_CREAT
even in scenarios where the file already exists (see related
F_CREATED_QUERY patch motivation above).
The series contained in the pr rearranges the pathwalk-for-open
code to also attempt a fast_lookup in certain O_CREAT cases. If a
positive dentry is found, the inode_lock can be avoided altogether
and it can stay in rcuwalk mode for the last step_into.
- Expose the 64 bit mount id via name_to_handle_at()
Now that we provide a unique 64-bit mount ID interface in statx(2),
we can now provide a race-free way for name_to_handle_at(2) to
provide a file handle and corresponding mount without needing to
worry about racing with /proc/mountinfo parsing or having to open a
file just to do statx(2).
While this is not necessary if you are using AT_EMPTY_PATH and
don't care about an extra statx(2) call, users that pass full paths
into name_to_handle_at(2) need to know which mount the file handle
comes from (to make sure they don't try to open_by_handle_at a file
handle from a different filesystem) and switching to AT_EMPTY_PATH
would require allocating a file for every name_to_handle_at(2) call
- Add a per dentry expire timeout to autofs
There are two fairly well known automounter map formats, the autofs
format and the amd format (more or less System V and Berkley).
Some time ago Linux autofs added an amd map format parser that
implemented a fair amount of the amd functionality. This was done
within the autofs infrastructure and some functionality wasn't
implemented because it either didn't make sense or required extra
kernel changes. The idea was to restrict changes to be within the
existing autofs functionality as much as possible and leave changes
with a wider scope to be considered later.
One of these changes is implementing the amd options:
1) "unmount", expire this mount according to a timeout (same as
the current autofs default).
2) "nounmount", don't expire this mount (same as setting the
autofs timeout to 0 except only for this specific mount) .
3) "utimeout=<seconds>", expire this mount using the specified
timeout (again same as setting the autofs timeout but only for
this mount)
To implement these options per-dentry expire timeouts need to be
implemented for autofs indirect mounts. This is because all map
keys (mounts) for autofs indirect mounts use an expire timeout
stored in the autofs mount super block info. structure and all
indirect mounts use the same expire timeout.
Fixes:
- Fix missing fput for FSCONFIG_SET_FD in autofs
- Use param->file for FSCONFIG_SET_FD in coda
- Delete the 'fs/netfs' proc subtreee when netfs module exits
- Make sure that struct uid_gid_map fits into a single cacheline
- Don't flush in-flight wb switches for superblocks without cgroup
writeback
- Correcting the idmapping mount example in the idmapping
documentation
- Fix a race between evice_inodes() and find_inode() and iput()
- Refine the show_inode_state() macro definition in writeback code
- Prevent dump_mapping() from accessing invalid dentry.d_name.name
- Show actual source for debugfs in /proc/mounts
- Annotate data-race of busy_poll_usecs in eventpoll
- Don't WARN for racy path_noexec check in exec code
- Handle OOM on mnt_warn_timestamp_expiry()
- Fix some spelling in the iomap design documentation
- Fix typo in procfs comment
- Fix typo in fs/namespace.c comment
Cleanups:
- Add the VFS git tree to the MAINTAINERS file
- Move FMODE_UNSIGNED_OFFSET to fop_flags freeing up another f_mode
bit in struct file bringing us to 5 free f_mode bits
- Remove the __I_DIO_WAKEUP bit from i_state flags as we can simplify
the wait mechanism
- Remove the unused path_put_init() helper
- Replace a __u32 with u32 for s_fsnotify_mask as __u32 is uapi
specific
- Replace the unsigned long i_state member with a u32 i_state member
in struct inode freeing up 4 bytes in struct inode. Instead of
using the bit based wait apis we're now using the var event apis
and using the individual bytes of the i_state member to wait on
state changes
- Explain how per-syscall AT_* flags should be allocated
- Use in_group_or_capable() helper to simplify the posix acl mode
update code
- Switch to LIST_HEAD() in fsync_buffers_list() to simplify the code
- Removed comment about d_rcu_to_refcount() as that function doesn't
exist anymore
- Add kernel documentation for lookup_fast()
- Don't re-zero evenpoll fields
- Remove outdated comment after close_fd()
- Fix imprecise wording in comment about the pipe filesystem
- Drop GFP_NOFAIL mode from alloc_page_buffers
- Missing blank line warnings and struct declaration improved in
file_table
- Annotate struct poll_list with __counted_by()
- Remove the unused read parameter in percpu-rwsem
- Remove linux/prefetch.h include from direct-io code
- Use kmemdup_array instead of kmemdup for multiple allocation in
mnt_idmapping code
- Remove unused mnt_cursor_del() declaration
Performance tweaks:
- Dodge smp_mb in break_lease and break_deleg in the common case
- Only read fops once in fops_{get,put}()
- Use RCU in ilookup()
- Elide smp_mb in iversion handling in the common case
- Drop one lock trip in evict()"
* tag 'vfs-6.12.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (58 commits)
uidgid: make sure we fit into one cacheline
proc: Fix typo in the comment
fs/pipe: Correct imprecise wording in comment
fhandle: expose u64 mount id to name_to_handle_at(2)
uapi: explain how per-syscall AT_* flags should be allocated
fs: drop GFP_NOFAIL mode from alloc_page_buffers
writeback: Refine the show_inode_state() macro definition
fs/inode: Prevent dump_mapping() accessing invalid dentry.d_name.name
mnt_idmapping: Use kmemdup_array instead of kmemdup for multiple allocation
netfs: Delete subtree of 'fs/netfs' when netfs module exits
fs: use LIST_HEAD() to simplify code
inode: make i_state a u32
inode: port __I_LRU_ISOLATING to var event
vfs: fix race between evice_inodes() and find_inode()&iput()
inode: port __I_NEW to var event
inode: port __I_SYNC to var event
fs: reorder i_state bits
fs: add i_state helpers
MAINTAINERS: add the VFS git tree
fs: s/__u32/u32/ for s_fsnotify_mask
...
|
||
|
Linus Torvalds
|
d22300518d |
Merge tag 'thermal-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These mostly continue to rework the thermal core and the thermal zone
driver interface to make the code more straightforward and reduce
bloat
The most significant piece of this work is a change of the code
related to binding cooling devices to thermal zones which, among other
things, replaces two previously existing thermal zone operations with
one allowing driver implementations to be much simpler
There is also a new thermal core testing module allowing mock thermal
zones to be created and controlled via debugfs in order to exercise
the thermal core functionality. It is expected to be used for
implementing thermal core self tests in the future
Apart from the above, there are assorted thermal driver updates
Specifics:
- Update some thermal drivers to eliminate thermal_zone_get_trip()
calls from them and get rid of that function (Rafael Wysocki)
- Update the thermal sysfs code to store trip point attributes in
trip descriptors and get to trip points via attribute pointers
(Rafael Wysocki)
- Move the computation of the low and high boundaries for
thermal_zone_set_trips() to __thermal_zone_device_update() (Daniel
Lezcano)
- Introduce a debugfs-based facility for thermal core testing (Rafael
Wysocki)
- Replace the thermal zone .bind() and .unbind() callbacks for
binding cooling devices to thermal zones with one .should_bind()
callback used for deciding whether or not a given cooling devices
should be bound to a given trip point in a given thermal zone
(Rafael Wysocki)
- Eliminate code that has no more users after the other changes, drop
some redundant checks from the thermal core and clean it up (Rafael
Wysocki)
- Fix rounding of delay jiffies in the thermal core (Rafael Wysocki)
- Refuse to accept trip point temperature or hysteresis that would
lead to an invalid threshold value when setting them via sysfs
(Rafael Wysocki)
- Adjust states of all uninitialized instances in the .manage()
callback of the Bang-bang thermal governor (Rafael Wysocki)
- Drop a couple of redundant checks along with the code depending on
them from the thermal core (Rafael Wysocki)
- Rearrange the thermal core to avoid redundant checks and simplify
control flow in a couple of code paths (Rafael Wysocki)
- Add power domain DT bindings for new Amlogic SoCs (Georges Stark)
- Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() in the ST
driver and add a Kconfig dependency on THERMAL_OF subsystem for the
STi driver (Raphael Gallais-Pou)
- Simplify the error code path in the probe functions in the brcmstb
driver with the helo of dev_err_probe() (Yan Zhen)
- Make imx_sc_thermal use dev_err_probe() (Alexander Stein)
- Remove trailing space after \n newline in the Renesas driver (Colin
Ian King)
- Add DT binding compatible string for the SA8255p to the tsens
thermal driver (Nikunj Kela)
- Use the devm_clk_get_enabled() helpers to simplify the init routine
in the sprd thermal driver (Huan Yang)
- Remove __maybe_unused notations for the functions by using the new
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros on the IMx and
Qoriq drivers (Fabio Estevam)
- Remove unused declarations from the ti-soc-thermal driver's header
file as the functions in question were removed previously (Zhang
Zekun)"
* tag 'thermal-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (48 commits)
thermal: core: Drop thermal_zone_device_is_enabled()
thermal: core: Check passive delay in monitor_thermal_zone()
thermal: core: Drop dead code from monitor_thermal_zone()
thermal: core: Drop redundant lockdep_assert_held()
thermal: gov_bang_bang: Adjust states of all uninitialized instances
thermal: sysfs: Add sanity checks for trip temperature and hysteresis
thermal/drivers/imx_sc_thermal: Use dev_err_probe
thermal/drivers/ti-soc-thermal: Remove unused declarations
thermal/drivers/imx: Remove __maybe_unused notations
thermal/drivers/qoriq: Remove __maybe_unused notations
thermal/drivers/sprd: Use devm_clk_get_enabled() helpers
dt-bindings: thermal: tsens: document support on SA8255p
thermal/drivers/renesas: Remove trailing space after \n newline
thermal/drivers/brcmstb_thermal: Simplify with dev_err_probe()
thermal/drivers/sti: Depend on THERMAL_OF subsystem
thermal/drivers/st: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
dt-bindings: thermal: amlogic,thermal: add optional power-domains
thermal: core: Drop tz field from struct thermal_instance
thermal: core: Drop redundant checks from thermal_bind_cdev_to_trip()
thermal: core: Rename cdev-to-thermal-zone bind/unbind functions
...
|
||
|
Linus Torvalds
|
02824a5fd1 |
Merge tag 'pm-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"By the number of new lines of code, the most visible change here is
the addition of hybrid CPU capacity scaling support to the
intel_pstate driver. Next are the amd-pstate driver changes related to
the calculation of the AMD boost numerator and preferred core
detection.
As far as new hardware support is concerned, the intel_idle driver
will now handle Granite Rapids Xeon processors natively, the
intel_rapl power capping driver will recognize family 1Ah of AMD
processors and Intel ArrowLake-U chipos, and intel_pstate will handle
Granite Rapids and Sierra Forest chips in the out-of-band (OOB) mode.
Apart from the above, there is a usual collection of assorted fixes
and code cleanups in many places and there are tooling updates.
Specifics:
- Remove LATENCY_MULTIPLIER from cpufreq (Qais Yousef)
- Add support for Granite Rapids and Sierra Forest in OOB mode to the
intel_pstate cpufreq driver (Srinivas Pandruvada)
- Add basic support for CPU capacity scaling on x86 and make the
intel_pstate driver set asymmetric CPU capacity on hybrid systems
without SMT (Rafael Wysocki)
- Add missing MODULE_DESCRIPTION() macros to the powerpc cpufreq
driver (Jeff Johnson)
- Several OF related cleanups in cpufreq drivers (Rob Herring)
- Enable COMPILE_TEST for ARM drivers (Rob Herrring)
- Introduce quirks for syscon failures and use socinfo to get
revision for TI cpufreq driver (Dhruva Gole, Nishanth Menon)
- Minor cleanups in amd-pstate driver (Anastasia Belova, Dhananjay
Ugwekar)
- Minor cleanups for loongson, cpufreq-dt and powernv cpufreq drivers
(Danila Tikhonov, Huacai Chen, and Liu Jing)
- Make amd-pstate validate return of any attempt to update EPP
limits, which fixes the masking hardware problems (Mario
Limonciello)
- Move the calculation of the AMD boost numerator outside of
amd-pstate, correcting acpi-cpufreq on systems with preferred cores
(Mario Limonciello)
- Harden preferred core detection in amd-pstate to avoid potential
false positives (Mario Limonciello)
- Add extra unit test coverage for mode state machine (Mario
Limonciello)
- Fix an "Uninitialized variables" issue in amd-pstste (Qianqiang
Liu)
- Add Granite Rapids Xeon support to intel_idle (Artem Bityutskiy)
- Disable promotion to C1E on Jasper Lake and Elkhart Lake in
intel_idle (Kai-Heng Feng)
- Use scoped device node handling to fix missing of_node_put() and
simplify walking OF children in the riscv-sbi cpuidle driver
(Krzysztof Kozlowski)
- Remove dead code from cpuidle_enter_state() (Dhruva Gole)
- Change an error pointer to NULL to fix error handling in the
intel_rapl power capping driver (Dan Carpenter)
- Fix off by one in get_rpi() in the intel_rapl power capping driver
(Dan Carpenter)
- Add support for ArrowLake-U to the intel_rapl power capping driver
(Sumeet Pawnikar)
- Fix the energy-pkg event for AMD CPUs in the intel_rapl power
capping driver (Dhananjay Ugwekar)
- Add support for AMD family 1Ah processors to the intel_rapl power
capping driver (Dhananjay Ugwekar)
- Remove unused stub for saveable_highmem_page() and remove
deprecated macros from power management documentation (Andy
Shevchenko)
- Use ysfs_emit() and sysfs_emit_at() in "show" functions in the PM
sysfs interface (Xueqin Luo)
- Update the maintainers information for the
operating-points-v2-ti-cpu DT binding (Dhruva Gole)
- Drop unnecessary of_match_ptr() from ti-opp-supply (Rob Herring)
- Add missing MODULE_DESCRIPTION() macros to devfreq governors (Jeff
Johnson)
- Use devm_clk_get_enabled() in the exynos-bus devfreq driver (Anand
Moon)
- Use of_property_present() instead of of_get_property() in the
imx-bus devfreq driver (Rob Herring)
- Update directory handling and installation process in the pm-graph
Makefile and add .gitignore to ignore sleepgraph.py artifacts to
pm-graph (Amit Vadhavana, Yo-Jung Lin)
- Make cpupower display residency value in idle-info (Aboorva
Devarajan)
- Add missing powercap_set_enabled() stub function to cpupower (John
B. Wyatt IV)
- Add SWIG support to cpupower (John B. Wyatt IV)"
* tag 'pm-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (62 commits)
cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue
cpufreq/amd-pstate-ut: Add test case for mode switches
cpufreq/amd-pstate: Export symbols for changing modes
amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking`
cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore`
cpufreq: amd-pstate: Optimize amd_pstate_update_limits()
cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()
x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()
x86/amd: Move amd_get_highest_perf() out of amd-pstate
ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn
ACPI: CPPC: Drop check for non zero perf ratio
x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()
ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB
x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c
PM: hibernate: Remove unused stub for saveable_highmem_page()
pm:cpupower: Add error warning when SWIG is not installed
MAINTAINERS: Add Maintainers for SWIG Python bindings
pm:cpupower: Include test_raw_pylibcpupower.py
pm:cpupower: Add SWIG bindings files for libcpupower
pm:cpupower: Add missing powercap_set_enabled() stub function
...
|
||
|
Linus Torvalds
|
114143a595 |
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The highlights are support for Arm's "Permission Overlay Extension"
using memory protection keys, support for running as a protected guest
on Android as well as perf support for a bunch of new interconnect
PMUs.
Summary:
ACPI:
- Enable PMCG erratum workaround for HiSilicon HIP10 and 11
platforms.
- Ensure arm64-specific IORT header is covered by MAINTAINERS.
CPU Errata:
- Enable workaround for hardware access/dirty issue on Ampere-1A
cores.
Memory management:
- Define PHYSMEM_END to fix a crash in the amdgpu driver.
- Avoid tripping over invalid kernel mappings on the kexec() path.
- Userspace support for the Permission Overlay Extension (POE) using
protection keys.
Perf and PMUs:
- Add support for the "fixed instruction counter" extension in the
CPU PMU architecture.
- Extend and fix the event encodings for Apple's M1 CPU PMU.
- Allow LSM hooks to decide on SPE permissions for physical
profiling.
- Add support for the CMN S3 and NI-700 PMUs.
Confidential Computing:
- Add support for booting an arm64 kernel as a protected guest under
Android's "Protected KVM" (pKVM) hypervisor.
Selftests:
- Fix vector length issues in the SVE/SME sigreturn tests
- Fix build warning in the ptrace tests.
Timers:
- Add support for PR_{G,S}ET_TSC so that 'rr' can deal with
non-determinism arising from the architected counter.
Miscellaneous:
- Rework our IPI-based CPU stopping code to try NMIs if regular IPIs
don't succeed.
- Minor fixes and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits)
perf: arm-ni: Fix an NULL vs IS_ERR() bug
arm64: hibernate: Fix warning for cast from restricted gfp_t
arm64: esr: Define ESR_ELx_EC_* constants as UL
arm64: pkeys: remove redundant WARN
perf: arm_pmuv3: Use BR_RETIRED for HW branch event if enabled
MAINTAINERS: List Arm interconnect PMUs as supported
perf: Add driver for Arm NI-700 interconnect PMU
dt-bindings/perf: Add Arm NI-700 PMU
perf/arm-cmn: Improve format attr printing
perf/arm-cmn: Clean up unnecessary NUMA_NO_NODE check
arm64/mm: use lm_alias() with addresses passed to memblock_free()
mm: arm64: document why pte is not advanced in contpte_ptep_set_access_flags()
arm64: Expose the end of the linear map in PHYSMEM_END
arm64: trans_pgd: mark PTEs entries as valid to avoid dead kexec()
arm64/mm: Delete __init region from memblock.reserved
perf/arm-cmn: Support CMN S3
dt-bindings: perf: arm-cmn: Add CMN S3
perf/arm-cmn: Refactor DTC PMU register access
perf/arm-cmn: Make cycle counts less surprising
perf/arm-cmn: Improve build-time assertion
...
|
||
|
Linus Torvalds
|
963d0d60d6 |
Merge tag 'x86_bugs_for_v6.12_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 hw mitigation updates from Borislav Petkov: - Add CONFIG_ option for every hw CPU mitigation. The intent is to support configurations and scenarios where the mitigations code is irrelevant - Other small fixlets and improvements * tag 'x86_bugs_for_v6.12_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/bugs: Fix handling when SRSO mitigation is disabled x86/bugs: Add missing NO_SSB flag Documentation/srso: Document a method for checking safe RET operates properly x86/bugs: Add a separate config for GDS x86/bugs: Remove GDS Force Kconfig option x86/bugs: Add a separate config for SSB x86/bugs: Add a separate config for Spectre V2 x86/bugs: Add a separate config for SRBDS x86/bugs: Add a separate config for Spectre v1 x86/bugs: Add a separate config for RETBLEED x86/bugs: Add a separate config for L1TF x86/bugs: Add a separate config for MMIO Stable Data x86/bugs: Add a separate config for TAA x86/bugs: Add a separate config for MDS |
||
|
Linus Torvalds
|
85ffc6e4ed |
Merge tag 'v6.12-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu"
"API:
- Make self-test asynchronous
Algorithms:
- Remove MPI functions added for SM3
- Add allocation error checks to remaining MPI functions (introduced
for SM3)
- Set default Jitter RNG OSR to 3
Drivers:
- Add hwrng driver for Rockchip RK3568 SoC
- Allow disabling SR-IOV VFs through sysfs in qat
- Fix device reset bugs in hisilicon
- Fix authenc key parsing by using generic helper in octeontx*
Others:
- Fix xor benchmarking on parisc"
* tag 'v6.12-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (96 commits)
crypto: n2 - Set err to EINVAL if snprintf fails for hmac
crypto: camm/qi - Use ERR_CAST() to return error-valued pointer
crypto: mips/crc32 - Clean up useless assignment operations
crypto: qcom-rng - rename *_of_data to *_match_data
crypto: qcom-rng - fix support for ACPI-based systems
dt-bindings: crypto: qcom,prng: document support for SA8255p
crypto: aegis128 - Fix indentation issue in crypto_aegis128_process_crypt()
crypto: octeontx* - Select CRYPTO_AUTHENC
crypto: testmgr - Hide ENOENT errors
crypto: qat - Remove trailing space after \n newline
crypto: hisilicon/sec - Remove trailing space after \n newline
crypto: algboss - Pass instance creation error up
crypto: api - Fix generic algorithm self-test races
crypto: hisilicon/qm - inject error before stopping queue
crypto: hisilicon/hpre - mask cluster timeout error
crypto: hisilicon/qm - reset device before enabling it
crypto: hisilicon/trng - modifying the order of header files
crypto: hisilicon - add a lock for the qp send operation
crypto: hisilicon - fix missed error branch
crypto: ccp - do not request interrupt on cmd completion when irqs disabled
...
|
||
|
Takashi Iwai
|
1a529af6f8 |
Merge tag 'asoc-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.12 This is a very large set of changes, almost all in drivers rather than the core. Even with the addition of several quite large drivers the overall diffstat is negative thanks to the removal of some old Intel board support which has been obsoleted by the AVS driver, helped a bit by some factoring out into helpers (especially around the Soundwire machine drivers for x86). Highlights include: - More simplifications and cleanups throughout the subsystem from Morimoto-san. - Extensive cleanups and refactoring of the Soundwire drivers to make better use of helpers. - Removal of Intel machine support obsoleted by the AVS driver. - Lots of DT schema conversions. - Machine support for many AMD and Intel x86 platforms. - Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek RTL1320 SoundWire and rev C, and Texas Instruments TAS2563 |
||
|
Akira Yokosawa
|
2040c9cb14 |
docs/memory-barriers.txt: Remove left-over references to "CACHE COHERENCY"
Commit
|
||
|
Kory Maincent
|
9297886f9f |
Documentation: networking: Fix missing PSE documentation and grammar issues
Fix a missing end of phrase in the documentation. It describes the ETHTOOL_A_C33_PSE_ACTUAL_PW attribute, which was not fully explained. Also, fix grammar issues by using simple present tense instead of present continuous. Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240912090550.743174-1-kory.maincent@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
ef17c3d22c |
Merge tag 'for-net-next-2024-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - btusb: Add MediaTek MT7925-B22M support ID 0x13d3:0x3604 - btusb: Add Realtek RTL8852C support ID 0x0489:0xe122 - btrtl: Add the support for RTL8922A - btusb: Add 2 USB HW IDs for MT7925 (0xe118/e) - btnxpuart: Add support for ISO packets - btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608 - btsdio: Do not bind to non-removable CYW4373 - hci_uart: Add support for Amlogic HCI UART * tag 'for-net-next-2024-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (27 commits) Bluetooth: btintel_pcie: Allocate memory for driver private data Bluetooth: btusb: Fix not handling ZPL/short-transfer Bluetooth: btusb: Add 2 USB HW IDs for MT7925 (0xe118/e) Bluetooth: btsdio: Do not bind to non-removable CYW4373 Bluetooth: hci_sync: Ignore errors from HCI_OP_REMOTE_NAME_REQ_CANCEL Bluetooth: CMTP: Mark BT_CMTP as DEPRECATED Bluetooth: replace deprecated strncpy with strscpy_pad Bluetooth: hci_core: Fix sending MGMT_EV_CONNECT_FAILED Bluetooth: btrtl: Set msft ext address filter quirk for RTL8852B Bluetooth: Use led_set_brightness() in LED trigger activate() callback Bluetooth: btrtl: Use kvmemdup to simplify the code Bluetooth: btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608 Bluetooth: btrtl: Add the support for RTL8922A Bluetooth: hci_ldisc: Use speed set by btattach as oper_speed Bluetooth: hci_conn: Remove redundant memset after kzalloc Bluetooth: L2CAP: Remove unused declarations dt-bindings: bluetooth: bring the HW description closer to reality for wcn6855 Bluetooth: btnxpuart: Add support for ISO packets Bluetooth: hci_h4: Add support for ISO packets in h4_recv.h Bluetooth: btusb: Add Realtek RTL8852C support ID 0x0489:0xe122 ... ==================== Link: https://patch.msgid.link/20240912214317.3054060-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |