The kernel image can contain multiple types (structs/unions)
with the same name. This causes distinct type hierarchies in
BTF data and makes resolve_btfids fail with error like:
BTFIDS vmlinux
FAILED unresolved symbol udp6_sock
as reported by Qais Yousef [1].
This change adds warning when multiple types of the same name
are detected:
BTFIDS vmlinux
WARN: multiple IDs found for 'file': 526, 113351 - using 526
WARN: multiple IDs found for 'sk_buff': 2744, 113958 - using 2744
We keep the lower ID for the given type instance and let the
build continue.
Also changing the 'nr' variable name to 'nr_types' to avoid confusion.
[1] https://lore.kernel.org/lkml/20201229151352.6hzmjvu3qh6p2qgg@e107158-lin/
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210105234219.970039-1-jolsa@kernel.org
The udpgro.sh will always return 0 (unless the bpf selftest was not
build first) even if there are some failed sub test-cases.
Therefore the kselftest framework will report this case is OK.
Check and return the exit status of each test to make it easier to
spot real failures.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from netfilter, wireless and bpf
trees.
Current release - regressions:
- mt76: fix NULL pointer dereference in mt76u_status_worker and
mt76s_process_tx_queue
- net: ipa: fix interconnect enable bug
Current release - always broken:
- netfilter: fixes possible oops in mtype_resize in ipset
- ath11k: fix number of coding issues found by static analysis tools
and spurious error messages
Previous releases - regressions:
- e1000e: re-enable s0ix power saving flows for systems with the
Intel i219-LM Ethernet controllers to fix power use regression
- virtio_net: fix recursive call to cpus_read_lock() to avoid a
deadlock
- ipv4: ignore ECN bits for fib lookups in fib_compute_spec_dst()
- sysfs: take the rtnl lock around XPS configuration
- xsk: fix memory leak for failed bind and rollback reservation at
NETDEV_TX_BUSY
- r8169: work around power-saving bug on some chip versions
Previous releases - always broken:
- dcb: validate netlink message in DCB handler
- tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS
to prevent unnecessary retries
- vhost_net: fix ubuf refcount when sendmsg fails
- bpf: save correct stopping point in file seq iteration
- ncsi: use real net-device for response handler
- neighbor: fix div by zero caused by a data race (TOCTOU)
- bareudp: fix use of incorrect min_headroom size and a false
positive lockdep splat from the TX lock
- mvpp2:
- clear force link UP during port init procedure in case
bootloader had set it
- add TCAM entry to drop flow control pause frames
- fix PPPoE with ipv6 packet parsing
- fix GoP Networking Complex Control config of port 3
- fix pkt coalescing IRQ-threshold configuration
- xsk: fix race in SKB mode transmit with shared cq
- ionic: account for vlan tag len in rx buffer len
- stmmac: ignore the second clock input, current clock framework does
not handle exclusive clock use well, other drivers may reconfigure
the second clock
Misc:
- ppp: change PPPIOCUNBRIDGECHAN ioctl request number to follow
existing scheme"
* tag 'net-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register access
net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYs
net: lapb: Decrease the refcount of "struct lapb_cb" in lapb_device_event
r8169: work around power-saving bug on some chip versions
net: usb: qmi_wwan: add Quectel EM160R-GL
selftests: mlxsw: Set headroom size of correct port
net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flag
ibmvnic: fix: NULL pointer dereference.
docs: networking: packet_mmap: fix old config reference
docs: networking: packet_mmap: fix formatting for C macros
vhost_net: fix ubuf refcount incorrectly when sendmsg fails
bareudp: Fix use of incorrect min_headroom size
bareudp: set NETIF_F_LLTX flag
net: hdlc_ppp: Fix issues when mod_timer is called while timer is running
atlantic: remove architecture depends
erspan: fix version 1 check in gre_parse_header()
net: hns: fix return value check in __lb_other_process()
net: sched: prevent invalid Scell_log shift count
net: neighbor: fix a crash caused by mod zero
ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst()
...
Currently, if a scenario is repeated as in "--configs '4*TREE01'",
the Kconfig analysis is performed for each occurrance (four times in
this example) and each analysis places the exact same data into the
exact same files. This is not really an issue in this repetition-four
example, but it can needlessly consume tens of seconds of wallclock time
for something like "--config '128*TINY01'".
This commit therefore does Kconfig analysis only once per set of
repeats of a given scenario, courtesy of the "sort -u" command and an
automatically generated awk script.
While in the area, this commit also wordsmiths a comment.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
klitmus7 of herdtools7 7.48 or earlier depends on ACCESS_ONCE(),
which was removed in Linux v4.15.
Fix the obvious typo in the table.
Fixes: d075a78a5a ("tools/memory-model/README: Expand dependency of klitmus7")
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This is a revert of commit 1947bfcf81 ("tools/memory-model: Add types
to litmus tests") with conflict resolutions.
klitmus7 [1] is aware of default types of "int" and "int*".
It accepts litmus tests for herd7 without extra type info unless
non-"int" variables are referenced by an "exists", "locations",
or "filter" directive.
[1]: Tested with klitmus7 versions 7.49 or later.
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit explicitly makes the connection between acquire loads and
the reads-from relation. It also adds an entry for happens-before,
and refers to the corresponding section of explanation.txt.
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Normally, kvm-recheck.sh is run from kvm.sh, which provides the
TORTURE_TRUST_MAKE environment variable that, if a non-empty string,
indicates that the --trust-make command-line parameter has been passed
to kvm.sh. If there was no --trust-make, kvm-recheck.sh insists
that the Make.out file contain at least one "CC" command. Thus, when
kvm-recheck.sh is run standalone to evaluate a prior --trust-make run,
it will incorrectly insist that a proper kernel build did not happen.
This commit therefore causes kvm-recheck.sh to also search the "log"
file in the top-level results directory for the string "--trust-make".
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Commit 757055ae8d ("init/console: Use ttynull as a fallback when
there is no console") results in the string "Warning: Failed to add
ttynull console. No stdin, stdout, and stderr for the init process!"
appearing on the console, which the rcutorture scripting interprets as
a warning, which causes every rcutorture run to be flagged. However,
the rcutorture init process never attempts to do any I/O, and thus does
not care that it has no stdin, stdout, or stderr.
This commit therefore causes the rcutorture scripting to ignore this
message.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit simplifies exit-code plumbing. It makes kvm-recheck.sh return
the value 1 for a build error and 2 for a runtime error. It also makes
kvm-find-errors.sh avoid checking runtime files for --build-only runs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit changes the "STOP" file that is used to cleanly halt a running
rcutorture run to "STOP.1" because no scenario directory will ever end
with ".1". If there really was a scenario named "STOP", its directories
would instead be named "STOP", "STOP.2", "STOP.3", and so on. While in
the area, the commit also changes the kernel-run-time checks for this
file to look directly in the directory above $resdir, thus avoiding the
need to pass the TORTURE_STOPFILE environment variable to remote systems.
While in the area, move the STOP.1 file to the top-level directory
covering all of the scenarios.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When all of the remote systems have the same number of CPUs, one
approach is to use one "--buildonly" run and one "--dryrun sched" run,
and then distributing the batches out one per remote system. However,
the output of "--dryrun sched" is not made for parsing, so this commit
adds a "--dryrun batches" that provides the same information in easily
parsed form.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
By default, the "panic" kernel parameter is zero, which causes the kernel
to loop indefinitely after a panic(). The rcutorture scripting will
eventually kill the corresponding qemu process, but only after waiting
for the full run duration plus a few minutes. This works, but delays
notifying the developer of the failure.
This commit therefore causes the rcutorture scripting to pass the
"panic=-1" kernel parameter, which caused the kernel to instead
unceremoniously shut down immediately. This in turn causes qemu to
terminate, so that if all of the runs in a given batch panic(), the
rcutorture scripting can immediately proceed to the next batch.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds the test summary to the end of the log in the top-level
directory containing the kvm.sh test artifacts. While in the area, it adds
the kvm.sh exit code to this test summary.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, passing something like "--kconfig CONFIG_NR_CPUS=2" to kvm.sh
has no effect on scenario scheduling. For scenarios that do not specify
the number of CPUs, this can result in kvm.sh wastefully scheduling only
one scenario at a time even when the --kconfig argument would allow
a number to be run concurrently. This commit therefore makes kvm.sh
consider the --kconfig arguments when scheduling scenarios across the
available CPUs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The kvm.sh script uses kvm-find-errors.sh to evaluate whether or not
a build failed. Unfortunately, kvm-find-errors.sh returns success if
there are no failed runs (including when there are no runs at all) even if
there are build failures. This commit therefore makes kvm-find-errors.sh
return failure in response to build failures.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Given that kvm.sh in invoked from scripts, it is only natural for
different levels of scripting to provide their own Kconfig option values,
for example. Unfortunately, right now, the last such argument on the
command line wins.
This commit therefore makes the --bootargs, --configs, --kconfigs,
--kmake-args, and --qemu-args argument values accumulate. For example,
where "--configs TREE01 --configs TREE02" would previously have run only
scenario TREE02, now it will run both scenarios.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, the "date" command producing the output on the kvm.sh "Test
Summary" line is executed at the beginning of the test, which produces a
date that is less than helpful to someone wanting to know the duration
of the test. This commit therefore defers this command's execution to
the end of the test.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcutorture scripts' identify_qemu_vcpus() function expects `lscpu`
to have a "CPU: " line, for example:
CPU(s): 8
But different local language settings can give different results:
Processeur(s) : 8
As a result, identify_qemu_vcpus() may return an empty string, resulting
in the following warning (with the same local language settings):
kvm-test-1-run.sh: ligne 138 : test: : nombre entier attendu comme expression
This commit therefore changes identify_qemu_vcpus() to use getconf,
which produces local-language-independend output.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: rcu@vger.kernel.org
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a config2csv.sh script that converts the specified
torture-test scenarios' Kconfig options and kernel-boot parameters to
.csv format. This allows easier comparison of scenarios when one fails
and another does not.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Distributed execution of rcutorture is eased if the qemu execution can
be split from the building of the kernel, as this allows target systems
to be used that are not set up to build kernels. It also avoids issues
with toolchain version skew across the cluster, aside of course from
qemu and KVM version skew.
This commit therefore records needed data as comments in the qemu-cmd file
and moves recording of the starting time to just before qemu is launched.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Scripts like kvm-check-branches.sh group runs under a single directory
in resdir in order to allow easier retrospective analysis. However, they
do this by letting kvm.sh create a directory as usual and then moving it
after the run. This can be very confusing when looking at the results
while kvm-check-branches.sh is running. This commit therefore enables
--datestamp to hand subdirectories to kvm.sh.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Knowing the number of builds that kvm.sh will split a run into allows
estimation of the duration of a test, give or take build duration.
This commit therefore adds a line of output to "--dryrun sched" that
gives the number of builds that will be run. This excludes "builds"
for repeated scenarios that reuse an earlier build.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Knowing the number of batches that kvm.sh will split a run into allows
estimation of the duration of a test, give or take the number of builds.
This commit therefore adds a line of output to "--dryrun sched" that
gives the number of batches that will be run.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The --kcsan argument to kvm.sh adds CONFIG_KCSAN_VERBOSE=y in order to
get more detail from the KCSAN reports. However, this Kconfig option
requires lockdep to be enabled. This commit therefore causes --kcsan
to also enable lockdep.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The test was setting the headroom size of the wrong port. This was not
visible because of a firmware bug that canceled this bug.
Set the headroom size of the correct port, so that the test will pass
with both old and new firmware versions.
Fixes: bfa804784e ("selftests: mlxsw: Add a PFC test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20201230114251.394009-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull ENABLE_MUST_CHECK removal from Miguel Ojeda:
"Remove CONFIG_ENABLE_MUST_CHECK (Masahiro Yamada)"
Note that this removes the config option by making the must-check
unconditional, not by removing must check itself.
* tag 'compiler-attributes-for-linus-v5.11' of git://github.com/ojeda/linux:
Compiler Attributes: remove CONFIG_ENABLE_MUST_CHECK
The BPF selftests have build time dependencies on cutting edge versions
of tools in the BPF ecosystem including LLVM which are more involved
to satisfy than more typical requirements like installing a package from
your distribution. This causes issues for users looking at kselftest in
as a whole who find that a default build of kselftest fails and that
resolving this is time consuming and adds administrative overhead. The
fast pace of BPF development and the need for a full BPF stack to do
substantial development or validation work on the code mean that people
working directly on it don't see a reasonable way to keep supporting
older environments without causing problems with the usability of the
BPF tests in BPF development so these requirements are unlikely to be
relaxed in the immediate future.
There is already support for skipping targets so in order to reduce the
barrier to entry for people interested in kselftest as a whole let's use
that to skip the BPF tests by default when people work with the top
level kselftest build system. Users can still build the BPF selftests
as part of the wider kselftest build by specifying SKIP_TARGETS,
including setting an empty SKIP_TARGETS to build everything. They can
also continue to build the BPF selftests individually in cases where
they are specifically focused on BPF.
This isn't ideal since it means people will need to take special steps
to build the BPF tests but the dependencies mean that realistically this
is already the case to some extent and it makes it easier for people to
pick up and work with the other selftests which is hopefully a net win.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix the following -Wformat warnings in vdso_test_correctness.c:
vdso_test_correctness.c: In function ‘test_one_clock_gettime64’:
vdso_test_correctness.c:352:21: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘long long int’ [-Wformat=]
352 | printf("\t%llu.%09ld %llu.%09ld %llu.%09ld\n",
| ~~~~^
| |
| long int
| %09lld
353 | (unsigned long long)start.tv_sec, start.tv_nsec,
| ~~~~~~~~~~~~~
| |
| long long int
vdso_test_correctness.c:352:32: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 5 has type ‘long long int’ [-Wformat=]
352 | printf("\t%llu.%09ld %llu.%09ld %llu.%09ld\n",
| ~~~~^
| |
| long int
| %09lld
353 | (unsigned long long)start.tv_sec, start.tv_nsec,
354 | (unsigned long long)vdso.tv_sec, vdso.tv_nsec,
| ~~~~~~~~~~~~
| |
| long long int
vdso_test_correctness.c:352:43: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 7 has type ‘long long int’ [-Wformat=]
The tv_sec member of __kernel_timespec is long long, both in
uapi/linux/time_types.h and locally in vdso_test_correctness.c.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add the test binaries introduced by commit 693f5ca08c ("kselftest:
Extend vDSO selftest"), commit 03f55c7952 ("kselftest: Extend vDSO
selftest to clock_getres") and commit c7e5789b24 ("kselftest: Move
test_vdso to the vDSO test suite") to .gitignore.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When BIOS disables turbo, The scaling_max_freq in cpufreq sysfs will be
limited to config level 0 base frequency. But when user selects a higher
config levels, this will result in higher base frequency. But since
scaling_max_freq is still old base frequency, the performance will still
be limited. So when the turbo is disabled and cpufreq base_frequency is
higher than scaling_max_freq, update the scaling_max_freq to the
base_frequency.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20201221071859.2783957-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use three-way comparison for address components to avoid integer
wraparound in the result of xfrm_policy_addr_delta(). This ensures
that the search trees are built and traversed correctly.
Treat IPv4 and IPv6 similarly by returning 0 when prefixlen == 0.
Prefix /0 has only one equivalence class.
Fixes: 9cf545ebd5 ("xfrm: policy: store inexact policies in a tree ordered by destination address")
Signed-off-by: Visa Hankala <visa@hankala.org>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When running this xfrm_policy.sh test script, even with some cases
marked as FAIL, the overall test result will still be PASS:
$ sudo ./xfrm_policy.sh
PASS: policy before exception matches
FAIL: expected ping to .254 to fail (exceptions)
PASS: direct policy matches (exceptions)
PASS: policy matches (exceptions)
FAIL: expected ping to .254 to fail (exceptions and block policies)
PASS: direct policy matches (exceptions and block policies)
PASS: policy matches (exceptions and block policies)
FAIL: expected ping to .254 to fail (exceptions and block policies after hresh changes)
PASS: direct policy matches (exceptions and block policies after hresh changes)
PASS: policy matches (exceptions and block policies after hresh changes)
FAIL: expected ping to .254 to fail (exceptions and block policies after hthresh change in ns3)
PASS: direct policy matches (exceptions and block policies after hthresh change in ns3)
PASS: policy matches (exceptions and block policies after hthresh change in ns3)
FAIL: expected ping to .254 to fail (exceptions and block policies after htresh change to normal)
PASS: direct policy matches (exceptions and block policies after htresh change to normal)
PASS: policy matches (exceptions and block policies after htresh change to normal)
PASS: policies with repeated htresh change
$ echo $?
0
This is because the $lret in check_xfrm() is not a local variable.
Therefore when a test failed in check_exceptions(), the non-zero $lret
will later get reset to 0 when the next test calls check_xfrm().
With this fix, the final return value will be 1. Make it easier for
testers to spot this failure.
Fixes: 39aa6928d4 ("xfrm: policy: fix netlink/pf_key policy lookups")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When CONFIG_BPF_LSM is not configured, running bpf selftesting will show
BPF_F_BPRM_SECUREEXEC undefined error for bprm_opts.c.
The problem is that bprm_opts.c includes vmliunx.h. The vmlinux.h is
generated by "bpftool btf dump file ./vmlinux format c". On the other
hand, BPF_F_BPRM_SECUREEXEC is defined in include/uapi/linux/bpf.h
and used only in bpf_lsm.c. When CONFIG_BPF_LSM is not set, bpf_lsm
will not be compiled, so vmlinux.h will not include definition of
BPF_F_BPRM_SECUREEXEC.
Ideally, we want to compile bpf selftest regardless of the configuration
setting, so change the include file from vmlinux.h to bpf.h.
Signed-off-by: Jiang Wang <jiang.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20201224011242.585967-1-jiang.wang@bytedance.com
Daniel Borkmann says:
====================
pull-request: bpf 2020-12-28
The following pull-request contains BPF updates for your *net* tree.
There is a small merge conflict between bpf tree commit 69ca310f34
("bpf: Save correct stopping point in file seq iteration") and net tree
commit 66ed594409 ("bpf/task_iter: In task_file_seq_get_next use
task_lookup_next_fd_rcu"). The get_files_struct() does not exist anymore
in net, so take the hunk in HEAD and add the `info->tid = curr_tid` to
the error path:
[...]
curr_task = task_seq_get_next(ns, &curr_tid, true);
if (!curr_task) {
info->task = NULL;
info->tid = curr_tid;
return NULL;
}
/* set info->task and info->tid */
[...]
We've added 10 non-merge commits during the last 9 day(s) which contain
a total of 11 files changed, 75 insertions(+), 20 deletions(-).
The main changes are:
1) Various AF_XDP fixes such as fill/completion ring leak on failed bind and
fixing a race in skb mode's backpressure mechanism, from Magnus Karlsson.
2) Fix latency spikes on lockdep enabled kernels by adding a rescheduling
point to BPF hashtab initialization, from Eric Dumazet.
3) Fix a splat in task iterator by saving the correct stopping point in the
seq file iteration, from Jonathan Lemon.
4) Fix BPF maps selftest by adding retries in case hashtab returns EBUSY
errors on update/deletes, from Andrii Nakryiko.
5) Fix BPF selftest error reporting to something more user friendly if the
vmlinux BTF cannot be found, from Kamal Mostafa.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add --buildid-mmap option to enable build id in PERF_RECORD_MMAP2 events.
It will only work if there's kernel support for that and it disables
build id cache (implies --no-buildid).
It's also possible to enable it permanently via config option in
~/.perfconfig file:
[record]
build-id=mmap
Also added build_id bit in the verbose output for perf_event_attr:
# perf record --buildid-mmap -vv
...
perf_event_attr:
type 1
size 120
...
build_id 1
Adding also missing text_poke bit.
Committer testing:
$ perf record -h build
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-B, --no-buildid do not collect buildids in perf.data
-N, --no-buildid-cache
do not update the buildid cache
--buildid-all Record build-id of all DSOs regardless of hits
--buildid-mmap Record build-id in map events
$
$ perf record --buildid-mmap sleep 1
Failed: no support to record build id in mmap events, update your kernel.
$
After adding the needed kernel bits in a test kernel:
$ perf record -vv --buildid-mmap sleep 1 |& grep -m1 build
Enabling build id in mmap2 events.
$ perf evlist -v
cycles:u: size: 120, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, read_format: ID, disabled: 1, inherit: 1, exclude_kernel: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, build_id: 1
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201214105457.543111-16-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
