Saeed Mahameed says:
====================
mlx5 fixes 2023-05-31
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Read embedded cpu after init bit cleared
net/mlx5e: Fix error handling in mlx5e_refresh_tirs
net/mlx5: Ensure af_desc.mask is properly initialized
net/mlx5: Fix setting of irq->map.index for static IRQ case
net/mlx5: Remove rmap also in case dynamic MSIX not supported
====================
Link: https://lore.kernel.org/r/20230601031051.131529-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A switch held in reset by default needs to wait longer until we can
reliably detect it.
An issue was observed when testing on the Marvell 88E6393X (Link Street).
The driver failed to detect the switch on some upstarts. Increasing the
wait time after reset deactivation solves this issue.
The updated wait time is now also the same as the wait time in the
mv88e6xxx_hardware_reset function.
Fixes: 7b75e49de4 ("net: dsa: mv88e6xxx: wait after reset deactivation")
Signed-off-by: Andreas Svensson <andreas.svensson@axis.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230530145223.1223993-1-andreas.svensson@axis.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
During driver load it reads embedded_cpu bit from initialization
segment, but the initialization segment is readable only after
initialization bit is cleared.
Move the call to mlx5_read_embedded_cpu() right after initialization bit
cleared.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Fixes: 591905ba96 ("net/mlx5: Introduce Mellanox SmartNIC and modify page management logic")
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Allocation failure is outside the critical lock section and should
return immediately rather than jumping to the unlock section.
Also unlock as soon as required and remove the now redundant jump label.
Fixes: 80a2a9026b ("net/mlx5e: Add a lock on tir list")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When dynamic IRQ allocation is not supported all IRQs are allocated up
front in mlx5_irq_table_create() instead of dynamically as part of
mlx5_irq_alloc(). In the latter dynamic case irq->map.index is set
via the mapping returned by pci_msix_alloc_irq_at(). In the static case
and prior to commit 1da438c0ae ("net/mlx5: Fix indexing of mlx5_irq")
irq->map.index was set in mlx5_irq_alloc() twice once initially to 0 and
then to the requested index before storing in the xarray. After this
commit it is only set to 0 which breaks all other IRQ mappings.
Fix this by setting irq->map.index to the requested index together with
irq->map.virq and improve the related comment to make it clearer which
cases it deals with.
Cc: Chuck Lever III <chuck.lever@oracle.com>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Fixes: 1da438c0ae ("net/mlx5: Fix indexing of mlx5_irq")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The apc->eth_stats.rx_cqes is one per NIC (vport), and it's on the
frequent and parallel code path of all queues. So, r/w into this
single shared variable by many threads on different CPUs creates a
lot caching and memory overhead, hence perf regression. And, it's
not accurate due to the high volume concurrent r/w.
For example, a workload is iperf with 128 threads, and with RPS
enabled. We saw perf regression of 25% with the previous patch
adding the counters. And this patch eliminates the regression.
Since the error path of mana_poll_rx_cq() already has warnings, so
keeping the counter and convert it to a per-queue variable is not
necessary. So, just remove this counter from this high frequency
code path.
Also, remove the tx_cqes counter for the same reason. We have
warnings & other counters for errors on that path, and don't need
to count every normal cqe processing.
Cc: stable@vger.kernel.org
Fixes: bd7fc6e195 ("net: mana: Add new MANA VF performance counters for easier troubleshooting")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/1685115537-31675-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the event of a change in XGBE mode, the current auto-negotiation
needs to be reset and the AN cycle needs to be re-triggerred. However,
the current code ignores the return value of xgbe_set_mode(), leading to
false information as the link is declared without checking the status
register.
Fix this by propagating the mode switch status information to
xgbe_phy_status().
Fixes: e57f7a3fea ("amd-xgbe: Prepare for working with more than one type of phy")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Saeed Mahameed says:
====================
mlx5 fixes 2023-05-24
This series includes bug fixes for the mlx5 driver.
* tag 'mlx5-fixes-2023-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
Documentation: net/mlx5: Wrap notes in admonition blocks
Documentation: net/mlx5: Add blank line separator before numbered lists
Documentation: net/mlx5: Use bullet and definition lists for vnic counters description
Documentation: net/mlx5: Wrap vnic reporter devlink commands in code blocks
net/mlx5: Fix check for allocation failure in comp_irqs_request_pci()
net/mlx5: DR, Add missing mutex init/destroy in pattern manager
net/mlx5e: Move Ethernet driver debugfs to profile init callback
net/mlx5e: Don't attach netdev profile while handling internal error
net/mlx5: Fix post parse infra to only parse every action once
net/mlx5e: Use query_special_contexts cmd only once per mdev
net/mlx5: fw_tracer, Fix event handling
net/mlx5: SF, Drain health before removing device
net/mlx5: Drain health before unregistering devlink
net/mlx5e: Do not update SBCM when prio2buffer command is invalid
net/mlx5e: Consider internal buffers size in port buffer calculations
net/mlx5e: Prevent encap offload when neigh update is running
net/mlx5e: Extract remaining tunnel encap code to dedicated file
====================
Link: https://lore.kernel.org/r/20230525034847.99268-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We encountered a kernel call trace issue which was related to
ndo_xdp_xmit callback on our i.MX8MP platform. The reproduce
steps show as follows.
1. The FEC port (eth0) connects to a PC port, and the PC uses
pktgen_sample03_burst_single_flow.sh to generate packets and
send these packets to the FEC port. Notice that the script must
be executed before step 2.
2. Run the "./xdp_redirect eth0 eth1" command on i.MX8MP, the
eth1 interface is the dwmac. Then there will be a call trace
issue soon. Please see the log for more details.
The root cause is that the NETDEV_XDP_ACT_NDO_XMIT feature is
enabled by default, so when the step 2 command is exexcuted
and packets have already been sent to eth0, the stmmac_xdp_xmit()
starts running before the stmmac_xdp_set_prog() finishes. To
resolve this issue, we disable the NETDEV_XDP_ACT_NDO_XMIT
feature by default and turn on/off this feature when the bpf
program is installed/uninstalled which just like the other
ethernet drivers.
Call Trace log:
[ 306.311271] ------------[ cut here ]------------
[ 306.315910] WARNING: CPU: 0 PID: 15 at lib/timerqueue.c:55 timerqueue_del+0x68/0x70
[ 306.323590] Modules linked in:
[ 306.326654] CPU: 0 PID: 15 Comm: ksoftirqd/0 Not tainted 6.4.0-rc1+ #37
[ 306.333277] Hardware name: NXP i.MX8MPlus EVK board (DT)
[ 306.338591] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 306.345561] pc : timerqueue_del+0x68/0x70
[ 306.349577] lr : __remove_hrtimer+0x5c/0xa0
[ 306.353777] sp : ffff80000b7c3920
[ 306.357094] x29: ffff80000b7c3920 x28: 0000000000000000 x27: 0000000000000001
[ 306.364244] x26: ffff80000a763a40 x25: ffff0000d0285a00 x24: 0000000000000001
[ 306.371390] x23: 0000000000000001 x22: ffff000179389a40 x21: 0000000000000000
[ 306.378537] x20: ffff000179389aa0 x19: ffff0000d2951308 x18: 0000000000001000
[ 306.385686] x17: f1d3000000000000 x16: 00000000c39c1000 x15: 55e99bbe00001a00
[ 306.392835] x14: 09000900120aa8c0 x13: e49af1d300000000 x12: 000000000000c39c
[ 306.399987] x11: 100055e99bbe0000 x10: ffff8000090b1048 x9 : ffff8000081603fc
[ 306.407133] x8 : 000000000000003c x7 : 000000000000003c x6 : 0000000000000001
[ 306.414284] x5 : ffff0000d2950980 x4 : 0000000000000000 x3 : 0000000000000000
[ 306.421432] x2 : 0000000000000001 x1 : ffff0000d2951308 x0 : ffff0000d2951308
[ 306.428585] Call trace:
[ 306.431035] timerqueue_del+0x68/0x70
[ 306.434706] __remove_hrtimer+0x5c/0xa0
[ 306.438549] hrtimer_start_range_ns+0x2bc/0x370
[ 306.443089] stmmac_xdp_xmit+0x174/0x1b0
[ 306.447021] bq_xmit_all+0x194/0x4b0
[ 306.450612] __dev_flush+0x4c/0x98
[ 306.454024] xdp_do_flush+0x18/0x38
[ 306.457522] fec_enet_rx_napi+0x6c8/0xc68
[ 306.461539] __napi_poll+0x40/0x220
[ 306.465038] net_rx_action+0xf8/0x240
[ 306.468707] __do_softirq+0x128/0x3a8
[ 306.472378] run_ksoftirqd+0x40/0x58
[ 306.475961] smpboot_thread_fn+0x1c4/0x288
[ 306.480068] kthread+0x124/0x138
[ 306.483305] ret_from_fork+0x10/0x20
[ 306.486889] ---[ end trace 0000000000000000 ]---
Fixes: 66c0e13ad2 ("drivers: net: turn on XDP features")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230524125714.357337-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By default the VSC8501 and VSC8502 RGMII/GMII/MII RX_CLK output is
disabled. To allow packet forwarding towards the MAC it needs to be
enabled.
For other PHYs supported by this driver the clock output is enabled
by default.
Fixes: d316986331 ("net: phy: mscc: add support for VSC8502")
Signed-off-by: David Epping <david.epping@missinglinkelectronics.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Holding the struct phy_device (phydev) lock is unnecessary when
accessing phydev->interface in the PHY driver .config_init method,
which is the only place that vsc85xx_rgmii_set_skews() is called from.
The phy_modify_paged() function implements required MDIO bus level
locking, which can not be achieved by a phydev lock.
Signed-off-by: David Epping <david.epping@missinglinkelectronics.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The VSC8501 PHY can use the same driver implementation as the VSC8502.
Adding the PHY ID and copying the handler functions of VSC8502 is
sufficient to operate it.
Signed-off-by: David Epping <david.epping@missinglinkelectronics.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mscc driver implements support for VSC8502, so its ID should be in
the MODULE_DEVICE_TABLE for automatic loading.
Signed-off-by: David Epping <david.epping@missinglinkelectronics.com>
Fixes: d316986331 ("net: phy: mscc: add support for VSC8502")
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As priv->dfs_root is cleared, and therefore missed, when change
eswitch mode, move the creation of the root debugfs to the init
callback of mlx5e_nic_profile and mlx5e_uplink_rep_profile, and
the destruction to the cleanup callback for symmeter.
Fixes: 288eca60cc ("net/mlx5e: Add Ethernet driver debugfs")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
As part of switchdev mode disablement, driver changes port netdevice
profile from uplink to nic. If this process is triggered by health
recovery flow (PCI reset, for ex.) profile attach would fail because all
fw commands aborted when internal error flag is set. As a result, nic
netdevice profile is not attached and driver fails to rollback to uplink
profile, which leave driver in broken state and cause crash later.
To handle broken state do netdevice profile initialization only instead
of full attachment and release mdev resources on driver suspend as
expected. Actual netdevice attachment is done during driver load.
Fixes: c4d7eb5768 ("net/mxl5e: Add change profile method")
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Caller of mlx5e_tc_act_post_parse() needs it to parse only the subset of
actions starting after previous split and ending at the current action.
However, that range is not provided as arguments and
mlx5e_tc_act_post_parse() uses generic flow_action_for_each() that iterates
over all flow actions. Not only this is redundant, it also causes a bug
when mlx5e_tc_act->post_parse() callback is not idempotent since it will be
called for every split. For example, ct action tc_act_post_parse_ct()
callback obtains a reference to mlx5_ct_ft instance and calling it several
times during parsing stage will cause reference counter imbalance.
Fix the issue by providing a proper action range of the current split
subset to mlx5e_tc_act_post_parse() and only calling
mlx5e_tc_act->post_parse() for actions inside the subset range.
Fixes: 8300f22526 ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Don't query the firmware so many times (num rqs * num wqes * wqe frags)
because it slows down linearly the interface creation time when the
product is larger. Do it only once per mdev and store the result in
mlx5e_param.
Due to helper function being called from different files, move it to
an appropriate location. Rename the function with a proper prefix and
add a small cleanup.
This fix applies only for legacy rq.
Fixes: 1b1e486883 ("net/mlx5e: Use query_special_contexts for mkeys")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
mlx5 driver needs to parse traces with event_id inside the range of
first_string_trace and num_string_trace. However, mlx5 is parsing all
events with event_id >= first_string_trace.
Fix it by checking for the correct range.
Fixes: c71ad41ccb ("net/mlx5: FW tracer, events handling")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
There is no point in recovery during device removal. Also, if health
work started need to wait for it to avoid races and NULL pointer
access.
Hence, drain health WQ before removing device.
Fixes: 1958fc2f07 ("net/mlx5: SF, Add auxiliary device driver")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
mlx5 health mechanism is using devlink APIs, which are using devlink
notify APIs. After the cited patch, using devlink notify APIs after
devlink is unregistered triggers a WARN_ON().
Hence, drain health WQ before devlink is unregistered.
Fixes: cf53021740 ("devlink: Notify users when objects are accessible")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The shared buffer pools configuration which are stored in the SBCM
register are updated when the user changes the prio2buffer mapping.
However, in case the user desired prio2buffer change is invalid,
which can occur due to mapping a lossless priority to a not large enough
buffer, the SBCM update should not be performed, as the user command is
failed.
Thus, Perform the SBCM update only after xoff threshold calculation is
performed and the user prio2buffer mapping is validated.
Fixes: a440030d89 ("net/mlx5e: Update shared buffer along with device buffer changes")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently, when a user triggers a change in port buffer headroom
(buffers 0-7), the driver checks that the requested headroom does
not exceed the total port buffer size. However, this check does not
take into account the internal buffers (buffers 8-9), which are also
part of the total port buffer. This can result in treating invalid port
buffer change requests as valid, causing unintended changes to the shared
buffer.
To address this, include the internal buffers size in the calculation of
available port buffer space which ensures that port buffer requests do not
exceed the correct limit.
Furthermore, remove internal buffers (8-9) size from the total_size
calculation as these buffers are reserved for internal use and are not
exposed to the user.
While at it, add verbosity to the debug prints in
mlx5e_port_query_buffer() function to ease future debugging.
Fixes: ecdf2dadee ("net/mlx5e: Receive buffer support for DCBX")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The cited commit adds a compeletion to remove dependency on rtnl
lock. But it causes a deadlock for multiple encapsulations:
crash> bt ffff8aece8a64000
PID: 1514557 TASK: ffff8aece8a64000 CPU: 3 COMMAND: "tc"
#0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45
#1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418
#2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898
#3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8
#4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb
#5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core]
#6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core]
#7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core]
#8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core]
#9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core]
#10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core]
#11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core]
#12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8
#13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower]
#14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower]
#15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047
#16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31
#17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853
#18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835
#19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27
#20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245
#21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482
#22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a
#23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2
#24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2
#25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f
#26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8
#27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c
crash> bt 0xffff8aeb07544000
PID: 1110766 TASK: ffff8aeb07544000 CPU: 0 COMMAND: "kworker/u20:9"
#0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45
#1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418
#2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88
#3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b
#4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core]
#5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core]
#6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core]
#7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c
#8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012
#9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d
#10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f
After the first encap is attached, flow will be added to encap
entry's flows list. If neigh update is running at this time, the
following encaps of the flow can't hold the encap_tbl_lock and
sleep. If neigh update thread is waiting for that flow's init_done,
deadlock happens.
Fix it by holding lock outside of the for loop. If neigh update is
running, prevent encap flows from offloading. Since the lock is held
outside of the for loop, concurrent creation of encap entries is not
allowed. So remove unnecessary wait_for_completion call for res_ready.
Fixes: 95435ad799 ("net/mlx5e: Only access fully initialized flows in neigh update")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Move set_encap_dests() and clean_encap_dests() to the tunnel encap
dedicated file. And rename them to mlx5e_tc_tun_encap_dests_set()
and mlx5e_tc_tun_encap_dests_unset().
No functional change in this patch. It is needed in the next patch.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Saeed Mahameed says:
====================
mlx5-fixes-2023-05-22
This series provides bug fixes for the mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit c6d96df9fa ("net: ethernet: mtk_eth_soc: drop generic vlan rx
offload, only use DSA untagging") makes VLAN RX offloading to be only used
on the SoCs without the MTK_NETSYS_V2 ability (which are not just MT7621
and MT7622). The commit disables the proper handling of special tagged
(DSA) frames, added with commit 87e3df4961 ("net-next: ethernet:
mediatek: add CDM able to recognize the tag for DSA"), for non
MTK_NETSYS_V2 SoCs when it finds a MAC that does not use DSA. So if the
other MAC uses DSA, the CDMQ component transmits DSA tagged frames to the
CPU improperly. This issue can be observed on frames with TCP, for example,
a TCP speed test using iperf3 won't work.
The commit disables the proper handling of special tagged (DSA) frames
because it assumes that these SoCs don't use more than one MAC, which is
wrong. Although I made Frank address this false assumption on the patch log
when they sent the patch on behalf of Felix, the code still made changes
with this assumption.
Therefore, the proper handling of special tagged (DSA) frames must be kept
enabled in all circumstances as it doesn't affect non DSA tagged frames.
Hardware DSA untagging, introduced with the commit 2d7605a729 ("net:
ethernet: mtk_eth_soc: enable hardware DSA untagging"), and VLAN RX
offloading are operations on the two CDM components of the frame engine,
CDMP and CDMQ, which connect to Packet DMA (PDMA) and QoS DMA (QDMA) and
are between the MACs and the CPU. These operations apply to all MACs of the
SoC so if one MAC uses DSA and the other doesn't, the hardware DSA
untagging operation will cause the CDMP component to transmit non DSA
tagged frames to the CPU improperly.
Since the VLAN RX offloading feature configuration was dropped, VLAN RX
offloading can only be used along with hardware DSA untagging. So, for the
case above, we need to disable both features and leave it to the CPU,
therefore software, to untag the DSA and VLAN tags.
So the correct way to handle this is:
For all SoCs:
Enable the proper handling of special tagged (DSA) frames
(MTK_CDMQ_IG_CTRL).
For non MTK_NETSYS_V2 SoCs:
Enable hardware DSA untagging (MTK_CDMP_IG_CTRL).
Enable VLAN RX offloading (MTK_CDMP_EG_CTRL).
When a non MTK_NETSYS_V2 SoC MAC does not use DSA:
Disable hardware DSA untagging (MTK_CDMP_IG_CTRL).
Disable VLAN RX offloading (MTK_CDMP_EG_CTRL).
Fixes: c6d96df9fa ("net: ethernet: mtk_eth_soc: drop generic vlan rx offload, only use DSA untagging")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver's interrupt service routine is requested with the
IRQF_NO_THREAD if MSI is available. This means that the routine is
invoked in hardirq context even on PREEMPT_RT. The routine itself is
relatively short and schedules a worker, performs register access and
schedules NAPI. On PREEMPT_RT, scheduling NAPI from hardirq results in
waking ksoftirqd for further processing so using NAPI threads with this
driver is highly recommended since it NULL routes the threaded-IRQ
efforts.
Adding rtl_hw_aspm_clkreq_enable() to the ISR is problematic on
PREEMPT_RT because the function uses spinlock_t locks which become
sleeping locks on PREEMPT_RT. The locks are only used to protect
register access and don't nest into other functions or locks. They are
also not used for unbounded period of time. Therefore it looks okay to
convert them to raw_spinlock_t.
Convert the three locks which are used from the interrupt service
routine to raw_spinlock_t.
Fixes: e1ed3e4d91 ("r8169: disable ASPM during NAPI poll")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20230522134121.uxjax0F5@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It was noticing that after a while when unloading/loading the driver and
sending traffic through the switch, it would stop working. It would stop
forwarding any traffic and the only way to get out of this was to do a
power cycle of the board. The root cause seems to be that the switch
core is initialized twice. Apparently initializing twice the switch core
disturbs the pointers in the queue systems in the HW, so after a while
it would stop sending the traffic.
Unfortunetly, it is not possible to use a reset of the switch here,
because the reset line is connected to multiple devices like MDIO,
SGPIO, FAN, etc. So then all the devices will get reseted when the
network driver will be loaded.
So the fix is to check if the core is initialized already and if that is
the case don't initialize it again.
Fixes: db8bcaad53 ("net: lan966x: add the basic lan966x driver")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230522120038.3749026-1-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After the cited patch, mlx5_irq xarray index can be different then
mlx5_irq MSIX table index.
Fix it by storing both mlx5_irq xarray index and MSIX table index.
Fixes: 3354822cde ("net/mlx5: Use dynamic msix vectors allocation")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The cited patch deny the user of changing the affinity of mlx5 irqs,
which break backward compatibility.
Hence, allow the user to change the affinity of mlx5 irqs.
Fixes: bbac70c741 ("net/mlx5: Use newer affinity descriptor")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
From one hand, mlx5 driver is allowing to probe PFs in parallel.
From the other hand, devcom, which is a share resource between PFs, is
registered without any lock. This might resulted in memory problems.
Hence, use the global mlx5_dev_list_lock in order to serialize devcom
registration.
Fixes: fadd59fc50 ("net/mlx5: Introduce inter-device communication mechanism")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In case devcom allocation is failed, mlx5 is always freeing the priv.
However, this priv might have been allocated by a different thread,
and freeing it might lead to use-after-free bugs.
Fix it by freeing the priv only in case it was allocated by the
running thread.
Fixes: fadd59fc50 ("net/mlx5: Introduce inter-device communication mechanism")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
devcom events are sent to all registered component. Following the
cited patch, it is possible for two components, e.g.: two eswitches,
to send devcom events, while both components are registered. This
means eswitch layer will do double un/pairing, which is double
allocation and free of resources, even though only one un/pairing is
needed. flow example:
cpu0 cpu1
---- ----
mlx5_devlink_eswitch_mode_set(dev0)
esw_offloads_devcom_init()
mlx5_devcom_register_component(esw0)
mlx5_devlink_eswitch_mode_set(dev1)
esw_offloads_devcom_init()
mlx5_devcom_register_component(esw1)
mlx5_devcom_send_event()
mlx5_devcom_send_event()
Hence, check whether the eswitches are already un/paired before
free/allocation of resources.
Fixes: 09b278462f ("net: devlink: enable parallel ops on netlink interface")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Check in the mlx5e_ptp_poll_ts_cq context if the ptp tx sq should be woken
up. Before change, the ptp tx sq may never wake up if the ptp tx ts skb
fifo is full when mlx5e_poll_tx_cq checks if the queue should be woken up.
Fixes: 1880bc4e4a ("net/mlx5e: Add TX port timestamp support")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Fix spacing for the error and also the correct error code pointer.
Fixes: c9b9dcb430 ("net/mlx5: Move device memory management to mlx5_core")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
With introduction of post action infrastructure most of the users of encap
attribute had been modified in order to obtain the correct attribute by
calling mlx5e_tc_get_encap_attr() helper instead of assuming encap action
is always on default attribute. However, the cited commit didn't modify
mlx5e_invalidate_encap() which prevents it from destroying correct modify
header action which leads to a warning [0]. Fix the issue by using correct
attribute.
[0]:
Feb 21 09:47:35 c-237-177-40-045 kernel: WARNING: CPU: 17 PID: 654 at drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:684 mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel: RIP: 0010:mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel: Call Trace:
Feb 21 09:47:35 c-237-177-40-045 kernel: <TASK>
Feb 21 09:47:35 c-237-177-40-045 kernel: mlx5e_tc_fib_event_work+0x8e3/0x1f60 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel: ? mlx5e_take_all_encap_flows+0xe0/0xe0 [mlx5_core]
Feb 21 09:47:35 c-237-177-40-045 kernel: ? lock_downgrade+0x6d0/0x6d0
Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x273/0x3f0
Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x273/0x3f0
Feb 21 09:47:35 c-237-177-40-045 kernel: process_one_work+0x7c2/0x1310
Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x3f0/0x3f0
Feb 21 09:47:35 c-237-177-40-045 kernel: ? pwq_dec_nr_in_flight+0x230/0x230
Feb 21 09:47:35 c-237-177-40-045 kernel: ? rwlock_bug.part.0+0x90/0x90
Feb 21 09:47:35 c-237-177-40-045 kernel: worker_thread+0x59d/0xec0
Feb 21 09:47:35 c-237-177-40-045 kernel: ? __kthread_parkme+0xd9/0x1d0
Fixes: 8300f22526 ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
