Pull driver core fixes from Greg KH:
"Here are three tiny driver core and firmware loader fixes for
5.14-rc5. They are:
- driver core fix for when probing fails
- firmware loader fixes for reported problems.
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
firmware_loader: fix use-after-free in firmware_fallback_sysfs
firmware_loader: use -ETIMEDOUT instead of -EAGAIN in fw_load_sysfs_fallback
drivers core: Fix oops when driver probe fails
Pull staging driver fixes from Greg KH:
"Here are a few small staging driver fixes for 5.14-rc5 to resolve some
reported problems. They include:
- mt7621 driver fix
- rtl8723bs driver fixes
- rtl8712 driver fixes.
Nothing major, just small problems resolved.
All have been in linux-next for a while with no reported issues"
* tag 'staging-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: mt7621-pci: avoid to re-disable clock for those pcies not in use
staging: rtl8712: error handling refactoring
staging: rtl8712: get rid of flush_scheduled_work
staging: rtl8723bs: select CONFIG_CRYPTO_LIB_ARC4
staging: rtl8723bs: Fix a resource leak in sd_int_dpc
Pull tty/serial fixes from Greg KH:
"Here are some small tty/serial driver fixes for 5.14-rc5 to resolve a
number of reported problems.
They include:
- mips serial driver fixes
- 8250 driver fixes for reported problems
- fsl_lpuart driver fixes
- other tiny driver fixes
All have been in linux-next for a while with no reported problems"
* tag 'tty-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_pci: Avoid irq sharing for MSI(-X) interrupts.
serial: 8250_mtk: fix uart corruption issue when rx power off
tty: serial: fsl_lpuart: fix the wrong return value in lpuart32_get_mctrl
serial: 8250_pci: Enumerate Elkhart Lake UARTs via dedicated driver
serial: 8250: fix handle_irq locking
serial: tegra: Only print FIFO error message when an error occurs
MIPS: Malta: Do not byte-swap accesses to the CBUS UART
serial: 8250: Mask out floating 16/32-bit bus bits
serial: max310x: Unprepare and disable clock in error path
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for 5.14-rc5. They resolve a
number of small reported issues, including:
- cdnsp driver fixes
- usb serial driver fixes and device id updates
- usb gadget hid fixes
- usb host driver fixes
- usb dwc3 driver fixes
- other usb gadget driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits)
usb: typec: tcpm: Keep other events when receiving FRS and Sourcing_vbus events
usb: dwc3: gadget: Avoid runtime resume if disabling pullup
usb: dwc3: gadget: Use list_replace_init() before traversing lists
USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2
USB: serial: pl2303: fix GT type detection
USB: serial: option: add Telit FD980 composition 0x1056
USB: serial: pl2303: fix HX type detection
USB: serial: ch341: fix character loss at high transfer rates
usb: cdnsp: Fix the IMAN_IE_SET and IMAN_IE_CLEAR macro
usb: cdnsp: Fixed issue with ZLP
usb: cdnsp: Fix incorrect supported maximum speed
usb: cdns3: Fixed incorrect gadget state
usb: gadget: f_hid: idle uses the highest byte for duration
Revert "thunderbolt: Hide authorized attribute if router does not support PCIe tunnels"
usb: otg-fsm: Fix hrtimer list corruption
usb: host: ohci-at91: suspend/resume ports after/before OHCI accesses
usb: musb: Fix suspend and resume issues for PHYs on I2C and SPI
usb: gadget: f_hid: added GET_IDLE and SET_IDLE handlers
usb: gadget: f_hid: fixed NULL pointer dereference
usb: gadget: remove leaked entry from udc driver list
...
When registering new ppp interface via PPPIOCNEWUNIT ioctl then kernel has
to choose interface name as this ioctl API does not support specifying it.
Kernel in this case register new interface with name "ppp<id>" where <id>
is the ppp unit id, which can be obtained via PPPIOCGUNIT ioctl. This
applies also in the case when registering new ppp interface via rtnl
without supplying IFLA_IFNAME.
PPPIOCNEWUNIT ioctl allows to specify own ppp unit id which will kernel
assign to ppp interface, in case this ppp id is not already used by other
ppp interface.
In case user does not specify ppp unit id then kernel choose the first free
ppp unit id. This applies also for case when creating ppp interface via
rtnl method as it does not provide a way for specifying own ppp unit id.
If some network interface (does not have to be ppp) has name "ppp<id>"
with this first free ppp id then PPPIOCNEWUNIT ioctl or rtnl call fails.
And registering new ppp interface is not possible anymore, until interface
which holds conflicting name is renamed. Or when using rtnl method with
custom interface name in IFLA_IFNAME.
As list of allocated / used ppp unit ids is not possible to retrieve from
kernel to userspace, userspace has no idea what happens nor which interface
is doing this conflict.
So change the algorithm how ppp unit id is generated. And choose the first
number which is not neither used as ppp unit id nor in some network
interface with pattern "ppp<id>".
This issue can be simply reproduced by following pppd call when there is no
ppp interface registered and also no interface with name pattern "ppp<id>":
pppd ifname ppp1 +ipv6 noip noauth nolock local nodetach pty "pppd +ipv6 noip noauth nolock local nodetach notty"
Or by creating the one ppp interface (which gets assigned ppp unit id 0),
renaming it to "ppp1" and then trying to create a new ppp interface (which
will always fails as next free ppp unit id is 1, but network interface with
name "ppp1" exists).
This patch fixes above described issue by generating new and new ppp unit
id until some non-conflicting id with network interfaces is generated.
Signed-off-by: Pali Rohár <pali@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
IFLA_IFNAME is nul-term string which means that IFLA_IFNAME buffer can be
larger than length of string which contains.
Function __rtnl_newlink() generates new own ifname if either IFLA_IFNAME
was not specified at all or userspace passed empty nul-term string.
It is expected that if userspace does not specify ifname for new ppp netdev
then kernel generates one in format "ppp<id>" where id matches to the ppp
unit id which can be later obtained by PPPIOCGUNIT ioctl.
And it works in this way if IFLA_IFNAME is not specified at all. But it
does not work when IFLA_IFNAME is specified with empty string.
So fix this logic also for empty IFLA_IFNAME in ppp_nl_newlink() function
and correctly generates ifname based on ppp unit identifier if userspace
did not provided preferred ifname.
Without this patch when IFLA_IFNAME was specified with empty string then
kernel created a new ppp interface in format "ppp<id>" but id did not
match ppp unit id returned by PPPIOCGUNIT ioctl. In this case id was some
number generated by __rtnl_newlink() function.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: bb8082f691 ("ppp: build ifname using unit identifier for rtnl based devices")
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan says:
====================
bnxt_en: PTP fixes
This series includes 2 fixes for the PTP feature. Update to the new
firmware interface so that the driver can pass the PTP sequence number
header offset of TX packets to the firmware. This is needed for all
PTP packet types (v1, v2, with or without VLAN) to work. The 2nd
fix is to use a different register window to read the PHC to avoid
conflict with an older Broadcom tool.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Some older Broadcom debug tools use window 5 and may conflict, so switch
to use window 6 instead.
Fixes: 118612d519 ("bnxt_en: Add PTP clock APIs, ioctls, and ethtool methods")
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
New firmware interface requires the PTP sequence ID header offset to
be passed to the firmware to properly find the matching timestamp
for all protocols.
Fixes: 83bb623c96 ("bnxt_en: Transmit and retrieve packet timestamps")
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The key change is the firmware call to retrieve the PTP TX timestamp.
The header offset for the PTP sequence number field is now added.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes possible leak of PTP virtual clocks.
The number of PTP virtual clocks to be unregistered is passed as
'u32', but the function that unregister the devices handles that as
'u8'.
Fixes: 73f37068d5 ("ptp: support ptp physical/virtual clocks conversion")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit a5e63c7d38 "net: phy: micrel: Fix detection of ksz87xx
switch" broke link detection on the external ports of the KSZ8795.
The previously unused phy_driver structure for these devices specifies
config_aneg and read_status functions that appear to be designed for a
fixed link and do not work with the embedded PHYs in the KSZ8795.
Delete the use of these functions in favour of the generic PHY
implementations which were used previously.
Fixes: a5e63c7d38 ("net: phy: micrel: Fix detection of ksz87xx switch")
Signed-off-by: Ben Hutchings <ben.hutchings@mind.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull io_uring from Jens Axboe:
"A few io-wq related fixes:
- Fix potential nr_worker race and missing max_workers check from one
path (Hao)
- Fix race between worker exiting and new work queue (me)"
* tag 'io_uring-5.14-2021-08-07' of git://git.kernel.dk/linux-block:
io-wq: fix lack of acct->nr_workers < acct->max_workers judgement
io-wq: fix no lock protection of acct->nr_worker
io-wq: fix race between worker exiting and activating free worker
Pull block fixes from Jens Axboe:
"A few minor fixes:
- Fix ldm kernel-doc warning (Bart)
- Fix adding offset twice for DMA address in n64cart (Christoph)
- Fix use-after-free in dasd path handling (Stefan)
- Order kyber insert trace correctly (Vincent)
- raid1 errored write handling fix (Wei)
- Fix blk-iolatency queue get failure handling (Yu)"
* tag 'block-5.14-2021-08-07' of git://git.kernel.dk/linux-block:
kyber: make trace_block_rq call consistent with documentation
block/partitions/ldm.c: Fix a kernel-doc warning
blk-iolatency: error out if blk_get_queue() failed in iolatency_set_limit()
n64cart: fix the dma address in n64cart_do_bvec
s390/dasd: fix use after free in dasd path handling
md/raid10: properly indicate failure when ending a failed write request
Pull RISC-V fixes from Palmer Dabbelt:
- avoid dereferencing a null task pointer while walking the stack
- fix the memory size in the HiFive Unleashed device tree
- disable stack protectors when randstruct is enabled, which results in
non-deterministic offsets during module builds
- a pair of fixes to avoid relying on a constant physical memory base
for the non-XIP builds
* tag 'riscv-for-linus-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
Revert "riscv: Remove CONFIG_PHYS_RAM_BASE_FIXED"
riscv: Get rid of CONFIG_PHYS_RAM_BASE in kernel physical address conversion
riscv: Disable STACKPROTECTOR_PER_TASK if GCC_PLUGIN_RANDSTRUCT is enabled
riscv: dts: fix memory size for the SiFive HiFive Unmatched
riscv: stacktrace: Fix NULL pointer dereference
Pull Kbuild fixes from Masahiro Yamada:
- Correct the Extended Regular Expressions in tools
- Adjust scripts/checkversion.pl for the current Kbuild
- Unset sub_make_done for 'make install' to make DKMS work again
* tag 'kbuild-fixes-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: cancel sub_make_done for the install target to fix DKMS
scripts: checkversion: modernize linux/version.h search strings
mips: Fix non-POSIX regexp
x86/tools/relocs: Fix non-POSIX regexp
Lockdep detected possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&mhiwwan->rx_lock);
local_irq_disable();
lock(&mhi_cntrl->pm_lock);
lock(&mhiwwan->rx_lock);
<Interrupt>
lock(&mhi_cntrl->pm_lock);
*** DEADLOCK ***
To prevent this we need to disable the soft-interrupts when taking
the rx_lock.
Cc: stable@vger.kernel.org
Fixes: fa588eba63 ("net: Add Qcom WWAN control driver")
Reported-by: Thomas Perrot <thomas.perrot@bootlin.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure that all external port are actually isolated from each other,
so no packets are leaked.
Fixes: ec6698c272 ("net: dsa: add support for Atheros AR9331 built-in switch")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hayes Wang says:
====================
r8169: adjust the setting for RTL8106e
These patches are uesed to avoid the delay of link-up interrupt, when
enabling ASPM for RTL8106e. The patch #1 is used to enable ASPM if
it is possible. And the patch #2 is used to modify the entrance latencies
of L0 and L1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The original L0 and L1 entrance latencies of RTL8106e are 4us. And
they cause the delay of link-up interrupt when enabling ASPM. Change
the L0 entrance latency to 7us and L1 entrance latency to 32us. Then,
they could avoid the issue.
Tested-by: Koba Ko <koba.ko@canonical.com>
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2021-08-07
The following pull-request contains BPF updates for your *net* tree.
We've added 4 non-merge commits during the last 9 day(s) which contain
a total of 4 files changed, 8 insertions(+), 7 deletions(-).
The main changes are:
1) Fix integer overflow in htab's lookup + delete batch op, from Tatsuhiko Yasumatsu.
2) Fix invalid fd 0 close in libbpf if BTF parsing failed, from Daniel Xu.
3) Fix libbpf feature probe for BPF_PROG_TYPE_CGROUP_SOCKOPT, from Robin Gögge.
4) Fix minor libbpf doc warning regarding code-block language, from Randy Dunlap.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 9b79878ced.
The removal of this config exposes CONFIG_PHYS_RAM_BASE for all kernel
types: this value being implementation-specific, this breaks the
genericity of the RISC-V kernel so revert it.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The usage of CONFIG_PHYS_RAM_BASE for all kernel types was a mistake:
this value is implementation-specific and this breaks the genericity of
the RISC-V kernel.
Fix this by introducing a new variable phys_ram_base that holds this
value at runtime and use it in the kernel physical address conversion
macro. Since this value is used only for XIP kernels, evaluate it only if
CONFIG_XIP_KERNEL is set which in addition optimizes this macro for
standard kernels at compile-time.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Fixes: 44c9225729 ("RISC-V: enable XIP")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Since 5.13 QE's ucc nodes can't get interrupts from devicetree:
ucc@2000 {
cell-index = <1>;
reg = <0x2000 0x200>;
interrupts = <32>;
interrupt-parent = <&qeic>;
};
Now fw_devlink expects driver to create and probe a struct device
for interrupt controller.
So lets convert this driver to simple platform_device with probe().
Also use platform_get_ and devm_ family function to get/allocate
resources and drop unused .compatible = "qeic".
[1] - https://lore.kernel.org/lkml/CAGETcx9PiX==mLxB9PO8Myyk6u2vhPVwTMsA5NkD-ywH5xhusw@mail.gmail.com
Fixes: e590474768 ("driver core: Set fw_devlink=on by default")
Fixes: ea718c6990 ("Revert "Revert "driver core: Set fw_devlink=on by default""")
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
In __htab_map_lookup_and_delete_batch(), hash buckets are iterated
over to count the number of elements in each bucket (bucket_size).
If bucket_size is large enough, the multiplication to calculate
kvmalloc() size could overflow, resulting in out-of-bounds write
as reported by KASAN:
[...]
[ 104.986052] BUG: KASAN: vmalloc-out-of-bounds in __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.986489] Write of size 4194224 at addr ffffc9010503be70 by task crash/112
[ 104.986889]
[ 104.987193] CPU: 0 PID: 112 Comm: crash Not tainted 5.14.0-rc4 #13
[ 104.987552] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[ 104.988104] Call Trace:
[ 104.988410] dump_stack_lvl+0x34/0x44
[ 104.988706] print_address_description.constprop.0+0x21/0x140
[ 104.988991] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.989327] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.989622] kasan_report.cold+0x7f/0x11b
[ 104.989881] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.990239] kasan_check_range+0x17c/0x1e0
[ 104.990467] memcpy+0x39/0x60
[ 104.990670] __htab_map_lookup_and_delete_batch+0x5ce/0xb60
[ 104.990982] ? __wake_up_common+0x4d/0x230
[ 104.991256] ? htab_of_map_free+0x130/0x130
[ 104.991541] bpf_map_do_batch+0x1fb/0x220
[...]
In hashtable, if the elements' keys have the same jhash() value, the
elements will be put into the same bucket. By putting a lot of elements
into a single bucket, the value of bucket_size can be increased to
trigger the integer overflow.
Triggering the overflow is possible for both callers with CAP_SYS_ADMIN
and callers without CAP_SYS_ADMIN.
It will be trivial for a caller with CAP_SYS_ADMIN to intentionally
reach this overflow by enabling BPF_F_ZERO_SEED. As this flag will set
the random seed passed to jhash() to 0, it will be easy for the caller
to prepare keys which will be hashed into the same value, and thus put
all the elements into the same bucket.
If the caller does not have CAP_SYS_ADMIN, BPF_F_ZERO_SEED cannot be
used. However, it will be still technically possible to trigger the
overflow, by guessing the random seed value passed to jhash() (32bit)
and repeating the attempt to trigger the overflow. In this case,
the probability to trigger the overflow will be low and will take
a very long time.
Fix the integer overflow by calling kvmalloc_array() instead of
kvmalloc() to allocate memory.
Fixes: 057996380a ("bpf: Add batch ops to all htab bpf map")
Signed-off-by: Tatsuhiko Yasumatsu <th.yasumatsu@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210806150419.109658-1-th.yasumatsu@gmail.com
Use "code-block: none" instead of "c" for non-C-language code blocks.
Removes these warnings:
lnx-514-rc4/Documentation/bpf/libbpf/libbpf_naming_convention.rst:111: WARNING: Could not lex literal_block as "c". Highlighting skipped.
lnx-514-rc4/Documentation/bpf/libbpf/libbpf_naming_convention.rst:124: WARNING: Could not lex literal_block as "c". Highlighting skipped.
Fixes: f42cfb469f ("bpf: Add documentation for libbpf including API autogen")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210802015037.787-1-rdunlap@infradead.org
Before this patch, btf_new() was liable to close an arbitrary FD 0 if
BTF parsing failed. This was because:
* btf->fd was initialized to 0 through the calloc()
* btf__free() (in the `done` label) closed any FDs >= 0
* btf->fd is left at 0 if parsing fails
This issue was discovered on a system using libbpf v0.3 (without
BTF_KIND_FLOAT support) but with a kernel that had BTF_KIND_FLOAT types
in BTF. Thus, parsing fails.
While this patch technically doesn't fix any issues b/c upstream libbpf
has BTF_KIND_FLOAT support, it'll help prevent issues in the future if
more BTF types are added. It also allow the fix to be backported to
older libbpf's.
Fixes: 3289959b97 ("libbpf: Support BTF loading and raw data output in both endianness")
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/5969bb991adedb03c6ae93e051fd2a00d293cf25.1627513670.git.dxu@dxuuu.xyz
After LPM, when migrating from a system with security mitigation enabled
to a system with mitigation disabled, the security flavor exposed in
/proc is not correctly set back to 0.
Do not assume the value of the security flavor is set to 0 when entering
init_cpu_char_feature_flags(), so when called after a LPM, the value is
set correctly even if the mitigation are not turned off.
Fixes: 6ce56e1ac3 ("powerpc/pseries: export LPAR security flavor in lparcfg")
Cc: stable@vger.kernel.org # v5.13+
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210805152308.33988-1-ldufour@linux.ibm.com
32 bits BOOKE have special interrupts for debug and other
critical events.
When handling those interrupts, dedicated registers are saved
in the stack frame in addition to the standard registers, leading
to a shift of the pt_regs struct.
Since commit db297c3b07 ("powerpc/32: Don't save thread.regs on
interrupt entry"), the pt_regs struct is expected to be at the
same place all the time.
Instead of handling a special struct in addition to pt_regs, just
add those special registers to struct pt_regs.
Fixes: db297c3b07 ("powerpc/32: Don't save thread.regs on interrupt entry")
Cc: stable@vger.kernel.org
Reported-by: Radu Rendec <radu.rendec@gmail.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/028d5483b4851b01ea4334d0751e7f260419092b.1625637264.git.christophe.leroy@csgroup.eu
The kyber ioscheduler calls trace_block_rq_insert() *after* the request
is added to the queue but the documentation for trace_block_rq_insert()
says that the call should be made *before* the request is added to the
queue. Move the tracepoint for the kyber ioscheduler so that it is
consistent with the documentation.
Signed-off-by: Vincent Fu <vincent.fu@samsung.com>
Link: https://lore.kernel.org/r/20210804194913.10497-1-vincent.fu@samsung.com
Reviewed by: Adam Manzanares <a.manzanares@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[Why]
With kernel module parameter "freesync_video" is enabled, if the mode
is changed to preferred mode(the mode with highest rate), then Freesync
fails because the preferred mode is treated as one of freesync video
mode, and then be configurated as freesync video mode(fixed refresh
rate).
[How]
Skip freesync fixed rate configurating when modeset to preferred mode.
Signed-off-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Pull ext4 fixes from Ted Ts'o:
"A regression fix, bug fix, and a comment cleanup for ext4"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix potential htree corruption when growing large_dir directories
ext4: remove conflicting comment from __ext4_forget
ext4: fix potential uninitialized access to retval in kmmpd
Due to 14f97f0b8e, the rawnand platforms without "secure-regions"
property defined in DT fails to probe. The issue is,
of_get_nand_secure_regions() errors out if
of_property_count_elems_of_size() returns a negative error code.
If the "secure-regions" property is not present in DT, then also we'll
get -EINVAL from of_property_count_elems_of_size() but it should not
be treated as an error for platforms not declaring "secure-regions"
in DT.
So fix this behaviour by checking for the existence of that property in
DT and return 0 if it is not present.
Fixes: 14f97f0b8e ("mtd: rawnand: Add a check in of_get_nand_secure_regions()")
Reported-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210727062813.32619-1-manivannan.sadhasivam@linaro.org
There is a lock hierarchy of major_names_lock --> mtd_table_mutex. One
existing chain is as follows:
1. major_names_lock --> loop_ctl_mutex (when blk_request_module calls
loop_probe)
2. loop_ctl_mutex --> bdev->bd_mutex (when loop_control_ioctl calls
loop_remove, which then calls del_gendisk)
3. bdev->bd_mutex --> mtd_table_mutex (when blkdev_get_by_dev calls
__blkdev_get, which then calls blktrans_open)
Since unregister_blkdev grabs the major_names_lock, we need to call it
outside the critical section for mtd_table_mutex, otherwise we invert
the lock hierarchy.
Reported-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210717100719.728829-1-desmondcheongzx@gmail.com
Pull tracing fixes from Steven Rostedt:
"Fix tracepoint race between static_call and callback data
As callbacks to a tracepoint are paired with the data that is passed
in when the callback is registered to the tracepoint, it must have
that data passed to the callback when the tracepoint is triggered,
else bad things will happen. To keep the two together, they are both
assigned to a tracepoint structure and added to an array. The
tracepoint call site will dereference the structure (via RCU) and call
the callback in that structure along with the data in that structure.
This keeps the callback and data tightly coupled.
Because of the overhead that retpolines have on tracepoint callbacks,
if there's only one callback attached to a tracepoint (a common case),
then it is called via a static call (code modified to do a direct call
instead of an indirect call). But to implement this, the data had to
be decoupled from the callback, as now the callback is implemented via
a direct call from the static call and not an indirect call from the
dereferenced structure.
Note, the static call only calls a callback used when there's a single
callback attached to the tracepoint. If more than one callback is
attached to the same tracepoint, then the static call will call an
iterator function that goes back to dereferencing the structure
keeping the callback and its data tightly coupled again.
Issues can arise when going from 0 callbacks to one, as the static
call is assigned to the callback, and it must take care that the data
passed to it is loaded before the static call calls the callback.
Going from 1 to 2 callbacks is not an issue, as long as the static
call is updated to the iterator before the tracepoint structure array
is updated via RCU. Going from 2 to more or back down to 2 is not an
issue as the iterator can handle all theses cases. But going from 2 to
1, care must be taken as the static call is now calling a callback and
the data that is loaded must be the data for that callback.
Care was taken to ensure the callback and data would be in-sync, but
after a bug was reported, it became clear that not enough was done to
make sure that was the case. These changes address this.
The first change is to compare the old and new data instead of the old
and new callback, as it's the data that can corrupt the callback, even
if the callback is the same (something getting freed).
The next change is to convert these transitions into states, to make
it easier to know when a synchronization is needed, and to perform
those synchronizations. The problem with this patch is that it slows
down disabling all events from under a second, to making it take over
10 seconds to do the same work. But that is addressed in the final
patch.
The final patch uses the RCU state functions to keep track of the RCU
state between the transitions, and only needs to perform the
synchronization if an RCU synchronization hasn't been done already.
This brings the performance of disabling all events back to its
original value. That's because no synchronization is required between
disabling tracepoints but is required when enabling a tracepoint after
its been disabled. If an RCU synchronization happens after the
tracepoint is disabled, and before it is re-enabled, there's no need
to do the synchronization again.
Both the second and third patch have subtle complexities that they are
separated into two patches. But because the second patch causes such a
regression in performance, the third patch adds a "Fixes" tag to the
second patch, such that the two must be backported together and not
just the second patch"
* tag 'trace-v5.14-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracepoint: Use rcu get state and cond sync for static call updates
tracepoint: Fix static call function vs data state mismatch
tracepoint: static call: Compare data on transition from 2->1 callees
Pull power management fixes from Rafael Wysocki:
"Fix a recent regression in the timer events oriented (TEO) cpuidle
governor causing it to misbehave when idle state 0 is disabled and
rename two local variables for improved clarity on top of that"
* tag 'pm-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: teo: Rename two local variables in teo_select()
cpuidle: teo: Fix alternative idle state lookup
Pull ACPI fix from Rafael Wysocki:
"Revert a recent ACPICA commit causing boot issues to appear on some
systems"
* tag 'acpi-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPICA: Fix memory leak caused by _CID repair function"
Pull ARM SoC fixes from Arnd Bergmann:
"Lots of small fixes for Arm SoCs this time, nothing too worrying:
- omap/beaglebone boot regression fix in gpt12 timer
- revert for i.mx8 soc driver breaking as a platform_driver
- kexec/kdump fixes for op-tee
- various fixes for incorrect DT settings on imx, mvebu, omap, stm32,
and tegra causing problems.
- device tree fixes for static checks in nomadik, versatile, stm32
- code fixes for issues found in build testing and with static
checking on tegra, ixp4xx, imx, omap"
* tag 'soc-fixes-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
soc: ixp4xx/qmgr: fix invalid __iomem access
soc: ixp4xx: fix printing resources
ARM: ixp4xx: goramo_mlr depends on old PCI driver
ARM: ixp4xx: fix compile-testing soc drivers
soc/tegra: Make regulator couplers depend on CONFIG_REGULATOR
ARM: dts: nomadik: Fix up interrupt controller node names
ARM: dts: stm32: Fix touchscreen IRQ line assignment on DHCOM
ARM: dts: stm32: Disable LAN8710 EDPD on DHCOM
ARM: dts: stm32: Prefer HW RTC on DHCOM SoM
omap5-board-common: remove not physically existing vdds_1v8_main fixed-regulator
ARM: dts: am437x-l4: fix typo in can@0 node
ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218
bus: ti-sysc: AM3: RNG is GP only
ARM: omap2+: hwmod: fix potential NULL pointer access
arm64: dts: armada-3720-turris-mox: remove mrvl,i2c-fast-mode
arm64: dts: armada-3720-turris-mox: fixed indices for the SDHC controllers
ARM: dts: imx: Swap M53Menlo pinctrl_power_button/pinctrl_power_out pins
ARM: imx: fix missing 3rd argument in macro imx_mmdc_perf_init
ARM: dts: colibri-imx6ull: limit SDIO clock to 25MHz
arm64: dts: ls1028: sl28: fix networking for variant 2
...
Pull arm64 fixes from Will Deacon:
"It's all pretty minor but the main fix is sorting out how we deal with
return values from 32-bit system calls as audit expects error codes to
be sign-extended to 64 bits
Summary:
- Fix extension/truncation of return values from 32-bit system calls
- Fix interaction between unwinding and tracing
- Fix spurious toolchain warning emitted during make
- Fix Kconfig help text for RANDOMIZE_MODULE_REGION_FULL"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: stacktrace: avoid tracing arch_stack_walk()
arm64: stacktrace: fix comment
arm64: fix the doc of RANDOMIZE_MODULE_REGION_FULL
arm64: move warning about toolchains to archprepare
arm64: fix compat syscall return truncation
Pull MIPS fix from Thomas Bogendoerfer:
"Fix PMD accounting change"
* tag 'mips-fixes_5.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: check return value of pgtable_pmd_page_ctor
Pull spi fixes from Mark Brown:
"A small collection of fixes for SPI, small mostly driver specific
things plus a fix for module autoloading which hadn't been working
properly for DT systems"
* tag 'spi-fix-v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cadence-quadspi: Fix check condition for DTR ops
spi: mediatek: Fix fifo transfer
spi: imx: mx51-ecspi: Fix CONFIGREG delay comment
spi: imx: mx51-ecspi: Fix low-speed CONFIGREG delay calculation
spi: update modalias_show after of_device_uevent_modalias support
spi: meson-spicc: fix memory leak in meson_spicc_remove
spi: spi-mux: Add module info needed for autoloading
Pull dmaengine fixes from Vinod Koul:
"A bunch of driver fixes, notably:
- idxd driver fixes for submission race, driver remove sequence,
setup sequence for MSIXPERM, array index and updating descriptor
vector
- usb-dmac, pm reference leak fix
- xilinx_dma, read-after-free fix
- uniphier-xdmac fix for using atomic readl_poll_timeout_atomic()
- of-dma, router_xlate to return
- imx-dma, generic dma fix"
* tag 'dmaengine-fix-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: imx-dma: configure the generic DMA type to make it work
dmaengine: of-dma: router_xlate to return -EPROBE_DEFER if controller is not yet available
dmaengine: stm32-dmamux: Fix PM usage counter unbalance in stm32 dmamux ops
dmaengine: stm32-dma: Fix PM usage counter imbalance in stm32 dma ops
dmaengine: uniphier-xdmac: Use readl_poll_timeout_atomic() in atomic state
dmaengine: idxd: fix submission race window
dmaengine: idxd: fix sequence for pci driver remove() and shutdown()
dmaengine: idxd: fix desc->vector that isn't being updated
dmaengine: idxd: fix setup sequence for MSIXPERM table
dmaengine: idxd: fix array index when int_handles are being used
dmaengine: usb-dmac: Fix PM reference leak in usb_dmac_probe()
dmaengine: xilinx_dma: Fix read-after-free bug when terminating transfers
Pull rdma fixes from Jason Gunthorpe:
"Several small recent regressions - rather more than usual, but nothing
too scary. Good to know people are testing.
- Typo causing incorrect operation of the mlx5 mkey cache
expiration
- Revert a CM patch that is breaking some ULPs
- Typo breaking SRQ in rxe
- Revert a rxe patch breaking icrc calculation
- Static checker warning about unbalanced locking in hns
- Subtle cxgb4 regression from a recent atomic to refcount
conversion"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/iw_cxgb4: Fix refcount underflow while destroying cqs.
RDMA/hns: Fix the double unlock problem of poll_sem
RDMA/rxe: Restore setting tot_len in the IPv4 header
RDMA/rxe: Use the correct size of wqe when processing SRQ
RDMA/cma: Revert INIT-INIT patch
RDMA/mlx5: Delay emptying a cache entry when a new MR is added to it recently
