This adds some extra noise to the tailcall_bpf2bpf4 tests that will cause
verify to patch insns. This then moves around subprog start/end insn
index and poke descriptor insn index to ensure that verify and JIT will
continue to track these correctly.
If done correctly verifier should pass this program same as before and
JIT should emit tail call logic.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210707223848.14580-3-john.fastabend@gmail.com
make[2]: *** No rule to make target 'install'. Stop.
make[1]: *** [Makefile:122: runqslower_install] Error 2
make: *** [Makefile:116: bpf_install] Error 2
There is no rule for target 'install' in tools/bpf/runqslower/Makefile,
and there is no need to install it, so just remove 'runqslower_install'.
Fixes: 9c01546d26 ("tools/bpf: Add runqslower tool to tools/bpf")
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210628030409.3459095-1-liwei391@huawei.com
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Do not refresh timeout in SYN_SENT for syn retransmissions.
Add selftest for unreplied TCP connection, from Florian Westphal.
2) Fix null dereference from error path with hardware offload
in nftables.
3) Remove useless nf_ct_gre_keymap_flush() from netns exit path,
from Vasily Averin.
4) Missing rcu read-lock side in ctnetlink helper info dump,
also from Vasily.
5) Do not mark RST in the reply direction coming after SYN packet
for an out-of-sync entry, from Ali Abdallah and Florian Westphal.
6) Add tcp_ignore_invalid_rst sysctl to allow to disable out of
segment RSTs, from Ali.
7) KCSAN fix for nf_conntrack_all_lock(), from Manfred Spraul.
8) Honor NFTA_LAST_SET in nft_last.
9) Fix incorrect arithmetics when restore last_jiffies in nft_last.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
After redirecting, it's already a new path. So the old PMTU info should
be cleared. The IPv6 test "mtu exception plus redirect" should only
has redirect info without old PMTU.
The IPv4 test can not be changed because of legacy.
Fixes: ec81053528 ("selftests: Add redirect tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the kernel doesn't enable option CONFIG_IPV6_SUBTREES, the RTA_SRC
info will not be exported to userspace in rt6_fill_node(). And ip cmd will
not print "from ::" to the route output. So remove this check.
Fixes: ec81053528 ("selftests: Add redirect tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull x86 fpu updates from Thomas Gleixner:
"Fixes and improvements for FPU handling on x86:
- Prevent sigaltstack out of bounds writes.
The kernel unconditionally writes the FPU state to the alternate
stack without checking whether the stack is large enough to
accomodate it.
Check the alternate stack size before doing so and in case it's too
small force a SIGSEGV instead of silently corrupting user space
data.
- MINSIGSTKZ and SIGSTKSZ are constants in signal.h and have never
been updated despite the fact that the FPU state which is stored on
the signal stack has grown over time which causes trouble in the
field when AVX512 is available on a CPU. The kernel does not expose
the minimum requirements for the alternate stack size depending on
the available and enabled CPU features.
ARM already added an aux vector AT_MINSIGSTKSZ for the same reason.
Add it to x86 as well.
- A major cleanup of the x86 FPU code. The recent discoveries of
XSTATE related issues unearthed quite some inconsistencies,
duplicated code and other issues.
The fine granular overhaul addresses this, makes the code more
robust and maintainable, which allows to integrate upcoming XSTATE
related features in sane ways"
* tag 'x86-fpu-2021-07-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (74 commits)
x86/fpu/xstate: Clear xstate header in copy_xstate_to_uabi_buf() again
x86/fpu/signal: Let xrstor handle the features to init
x86/fpu/signal: Handle #PF in the direct restore path
x86/fpu: Return proper error codes from user access functions
x86/fpu/signal: Split out the direct restore code
x86/fpu/signal: Sanitize copy_user_to_fpregs_zeroing()
x86/fpu/signal: Sanitize the xstate check on sigframe
x86/fpu/signal: Remove the legacy alignment check
x86/fpu/signal: Move initial checks into fpu__restore_sig()
x86/fpu: Mark init_fpstate __ro_after_init
x86/pkru: Remove xstate fiddling from write_pkru()
x86/fpu: Don't store PKRU in xstate in fpu_reset_fpstate()
x86/fpu: Remove PKRU handling from switch_fpu_finish()
x86/fpu: Mask PKRU from kernel XRSTOR[S] operations
x86/fpu: Hook up PKRU into ptrace()
x86/fpu: Add PKRU storage outside of task XSAVE buffer
x86/fpu: Dont restore PKRU in fpregs_restore_userspace()
x86/fpu: Rename xfeatures_mask_user() to xfeatures_mask_uabi()
x86/fpu: Move FXSAVE_LEAK quirk info __copy_kernel_to_fpregs()
x86/fpu: Rename __fpregs_load_activate() to fpregs_restore_userregs()
...
The Intel PT decoder limits the number of unconditional branches (e.g.
jmps) decoded without consuming any trace packets. Generally, a loop
needs a conditional branch which generates a TNT packet, whereas a "ret"
instruction will generate a TIP or TNT packet. So exceeding the limit is
assumed to be a never-ending loop, which can happen if there has been a
decoding error putting the decoder at the wrong place in the code.
Up until now, the limit of 10000 has been enough but some analytic
purposes have been reported to exceed that.
Increase the limit to 100000, and make it configurable via perf config
intel-pt.max-loops. Also amend the "Never-ending loop" message to
mention the configuration entry.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210701175132.3977-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 48a1f56526 ("perf script python: Add more PMU fields to
event handler dict") added functionality to report fields like weight,
iregs, uregs etc via perf report. That commit predefined buffer size to
512 bytes to print those fields.
But in PowerPC, since we added extended regs support in:
068aeea377 ("perf powerpc: Support exposing Performance Monitor Counter SPRs as part of extended regs")
d735599a06 ("powerpc/perf: Add extended regs support for power10 platform")
Now iregs can carry more bytes of data and this predefined buffer size
can result to data loss in perf script output.
This patch resolves this issue by making the buffer size dynamic, based
on the number of registers needed to print. It also changes the
regs_map() return type from int to void, as it is not being used by the
set_regs_in_dict(), its only caller.
Fixes: 068aeea377 ("perf powerpc: Support exposing Performance Monitor Counter SPRs as part of extended regs")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20210628062341.155839-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ASan reports a heap-buffer-overflow in elf_sec__is_text when using perf-top.
The bug is caused by the fact that secstrs is built from runtime_ss, while
shdr is built from syms_ss if shdr.sh_type != SHT_NOBITS. Therefore, they
point to two different ELF files.
This patch renames secstrs to secstrs_run and adds secstrs_sym, so that
the correct secstrs is chosen depending on shdr.sh_type.
$ ASAN_OPTIONS=abort_on_error=1:disable_coredump=0:unmap_shadow_on_exit=1 ./perf top
=================================================================
==363148==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x61300009add6 at pc 0x00000049875c bp 0x7f4f56446440 sp 0x7f4f56445bf0
READ of size 1 at 0x61300009add6 thread T6
#0 0x49875b in StrstrCheck(void*, char*, char const*, char const*) (/home/user/linux/tools/perf/perf+0x49875b)
#1 0x4d13a2 in strstr (/home/user/linux/tools/perf/perf+0x4d13a2)
#2 0xacae36 in elf_sec__is_text /home/user/linux/tools/perf/util/symbol-elf.c:176:9
#3 0xac3ec9 in elf_sec__filter /home/user/linux/tools/perf/util/symbol-elf.c:187:9
#4 0xac2c3d in dso__load_sym /home/user/linux/tools/perf/util/symbol-elf.c:1254:20
#5 0x883981 in dso__load /home/user/linux/tools/perf/util/symbol.c:1897:9
#6 0x8e6248 in map__load /home/user/linux/tools/perf/util/map.c:332:7
#7 0x8e66e5 in map__find_symbol /home/user/linux/tools/perf/util/map.c:366:6
#8 0x7f8278 in machine__resolve /home/user/linux/tools/perf/util/event.c:707:13
#9 0x5f3d1a in perf_event__process_sample /home/user/linux/tools/perf/builtin-top.c:773:6
#10 0x5f30e4 in deliver_event /home/user/linux/tools/perf/builtin-top.c:1197:3
#11 0x908a72 in do_flush /home/user/linux/tools/perf/util/ordered-events.c:244:9
#12 0x905fae in __ordered_events__flush /home/user/linux/tools/perf/util/ordered-events.c:323:8
#13 0x9058db in ordered_events__flush /home/user/linux/tools/perf/util/ordered-events.c:341:9
#14 0x5f19b1 in process_thread /home/user/linux/tools/perf/builtin-top.c:1109:7
#15 0x7f4f6a21a298 in start_thread /usr/src/debug/glibc-2.33-16.fc34.x86_64/nptl/pthread_create.c:481:8
#16 0x7f4f697d0352 in clone ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
0x61300009add6 is located 10 bytes to the right of 332-byte region [0x61300009ac80,0x61300009adcc)
allocated by thread T6 here:
#0 0x4f3f7f in malloc (/home/user/linux/tools/perf/perf+0x4f3f7f)
#1 0x7f4f6a0a88d9 (/lib64/libelf.so.1+0xa8d9)
Thread T6 created by T0 here:
#0 0x464856 in pthread_create (/home/user/linux/tools/perf/perf+0x464856)
#1 0x5f06e0 in __cmd_top /home/user/linux/tools/perf/builtin-top.c:1309:6
#2 0x5ef19f in cmd_top /home/user/linux/tools/perf/builtin-top.c:1762:11
#3 0x7b28c0 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#4 0x7b119f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#5 0x7b2423 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#6 0x7b0c19 in main /home/user/linux/tools/perf/perf.c:539:3
#7 0x7f4f696f7b74 in __libc_start_main /usr/src/debug/glibc-2.33-16.fc34.x86_64/csu/../csu/libc-start.c:332:16
SUMMARY: AddressSanitizer: heap-buffer-overflow (/home/user/linux/tools/perf/perf+0x49875b) in StrstrCheck(void*, char*, char const*, char const*)
Shadow bytes around the buggy address:
0x0c268000b560: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c268000b570: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c268000b580: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c268000b590: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c268000b5a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
=>0x0c268000b5b0: 00 00 00 00 00 00 00 00 00 04[fa]fa fa fa fa fa
0x0c268000b5c0: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
0x0c268000b5d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c268000b5e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c268000b5f0: 07 fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c268000b600: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
Shadow gap: cc
==363148==ABORTING
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Fabian Hemmer <copy@copy.sh>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Link: http://lore.kernel.org/lkml/20210621222108.196219-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the disasm is empty, 's' should fail. Instead it seemingly works,
hiding the empty lines and causing an assertion error on the next time
annotate is called (from within perf report).
The problem is caused by a buffer overflow, caused by a wrong exit
condition in annotate_browser__find_next_asm_line, which checks
browser->b.top instead of browser->b.entries.
This patch fixes the issue, making annotate_browser__toggle_source
fail if the disasm is empty (nothing happens to the user).
Fixes: 6de249d66d ("perf annotate: Allow 's' on source code lines")
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210705161524.72953-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In Fedora34, libc-2.33.so has both .dynsym and .symtab sections and
most of (not all) symbols moved to .dynsym. In this case, perf only
decode the symbols in .symtab, and perf probe can not list up the
functions in the library.
To fix this issue, decode both .symtab and .dynsym sections.
Without this fix,
-----
$ ./perf probe -x /usr/lib64/libc-2.33.so -F
@plt
@plt
calloc@plt
free@plt
malloc@plt
memalign@plt
realloc@plt
-----
With this fix.
-----
$ ./perf probe -x /usr/lib64/libc-2.33.so -F
@plt
@plt
a64l
abort
abs
accept
accept4
access
acct
addmntent
-----
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Stefan Liebler <stli@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Link: http://lore.kernel.org/lkml/162532652681.393143.10163733179955267999.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix debuginfo__new() to set the build-id to dso before
dso__read_binary_type_filename() so that it can find
DSO_BINARY_TYPE__BUILDID_DEBUGINFO debuginfo correctly.
However, this may not change the result, because elfutils (libdwfl) has
its own debuginfo finder. With/without this patch, the perf probe
correctly find the debuginfo file.
This is just a failsafe and keep code's sanity (if you use
dso__read_binary_type_filename(), you must set the build-id to the dso.)
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Masami Hiramatsu <mhriamat@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Stefan Liebler <stli@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Link: http://lore.kernel.org/lkml/162532651863.393143.11692691321219235810.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The update to streamline libbpf error reporting intended to change all
functions to return the errno as a negative return value if
LIBBPF_STRICT_DIRECT_ERRS is set. However, if the flag is *not* set, the
return value changes for the two functions that were already returning a
negative errno unconditionally: bpf_link__unpin() and perf_buffer__poll().
This is a user-visible API change that breaks applications; so let's revert
these two functions back to unconditionally returning a negative errno
value.
Fixes: e9fc3ce99b ("libbpf: Streamline error reporting for high-level APIs")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210706122355.236082-1-toke@redhat.com
Pull char / misc driver updates from Greg KH:
"Here is the big set of char / misc and other driver subsystem updates
for 5.14-rc1. Included in here are:
- habanalabs driver updates
- fsl-mc driver updates
- comedi driver updates
- fpga driver updates
- extcon driver updates
- interconnect driver updates
- mei driver updates
- nvmem driver updates
- phy driver updates
- pnp driver updates
- soundwire driver updates
- lots of other tiny driver updates for char and misc drivers
This is looking more and more like the "various driver subsystems
mushed together" tree...
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
mcb: Use DEFINE_RES_MEM() helper macro and fix the end address
PNP: moved EXPORT_SYMBOL so that it immediately followed its function/variable
bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' calls
bus: mhi: Wait for M2 state during system resume
bus: mhi: core: Fix power down latency
intel_th: Wait until port is in reset before programming it
intel_th: msu: Make contiguous buffers uncached
intel_th: Remove an unused exit point from intel_th_remove()
stm class: Spelling fix
nitro_enclaves: Set Bus Master for the NE PCI device
misc: ibmasm: Modify matricies to matrices
misc: vmw_vmci: return the correct errno code
siox: Simplify error handling via dev_err_probe()
fpga: machxo2-spi: Address warning about unused variable
lkdtm/heap: Add init_on_alloc tests
selftests/lkdtm: Enable various testable CONFIGs
lkdtm: Add CONFIG hints in errors where possible
lkdtm: Enable DOUBLE_FAULT on all architectures
lkdtm/heap: Add vmalloc linear overflow test
lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE
...
To pick the changes in these csets:
64c2c2c62f ("quota: Change quotactl_path() systcall to an fd-based one")
65ffb3d69e ("quota: Wire up quotactl_fd syscall")
That silences these perf build warnings and add support for those new
syscalls in tools such as 'perf trace'.
For instance, this is now possible:
# perf trace -v -e quota*
event qualifier tracepoint filter: (common_pid != 158365 && common_pid != 2512) && (id == 179 || id == 443)
^C#
That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.
$ grep quota tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
179 common quotactl sys_quotactl
443 common quotactl_fd sys_quotactl_fd
$
This addresses these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
Warning: Kernel ABI header at 'tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl' differs from latest version at 'arch/mips/kernel/syscalls/syscall_n64.tbl'
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
Fixes: 4ca9b3859d ("mm/madvise: introduce MADV_POPULATE_(READ|WRITE) to prefault page tables")
That result in these changes in the tools:
$ tools/perf/trace/beauty/madvise_behavior.sh > before
$ cp include/uapi/asm-generic/mman-common.h tools/include/uapi/asm-generic/mman-common.h
$ tools/perf/trace/beauty/madvise_behavior.sh > after
$ diff -u before after
--- before 2021-07-05 14:30:15.167212621 -0300
+++ after 2021-07-05 14:30:26.638462594 -0300
@@ -18,6 +18,8 @@
[19] = "KEEPONFORK",
[20] = "COLD",
[21] = "PAGEOUT",
+ [22] = "POPULATE_READ",
+ [23] = "POPULATE_WRITE",
[100] = "HWPOISON",
[101] = "SOFT_OFFLINE",
};
$
I.e. now when madvise gets those behaviours as args, it will be able to
translate from the number to a human readable string.
This addresses the following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman-common.h' differs from latest version at 'include/uapi/asm-generic/mman-common.h'
diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h
Cc: David Hildenbrand <david@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Picking the changes from:
2e290c8d8d ("drm: document minimum kernel version for DRM_CLIENT_CAP_*")
bbf4627ba6 ("drm: clarify and linkify DRM_CLIENT_CAP_WRITEBACK_CONNECTORS docs")
88938bf343 ("drm: reference mode flags in DRM_CLIENT_CAP_* docs")
Silencing these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h
No changes in tooling as these are just C comment documentation changes.
Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Picking the changes from:
08fdced60c ("ALSA: rawmidi: Add framing mode")
Which entails no changes in the tooling side as it doesn't introduce new
ioctls.
To silence this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: David Henningsson <coding@diwic.se>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Recently bperf was added to use BPF to count perf events for various
purposes. This is an extension for the approach and targetting to
cgroup usages.
Unlike the other bperf, it doesn't share the events with other
processes but it'd reduce unnecessary events (and the overhead of
multiplexing) for each monitored cgroup within the perf session.
When --for-each-cgroup is used with --bpf-counters, it will open
cgroup-switches event per cpu internally and attach the new BPF
program to read given perf_events and to aggregate the results for
cgroups. It's only called when task is switched to a task in a
different cgroup.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210701211227.1403788-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current 'perf report' fails to process a pipe input when --task or
--stat options are used. This is because they reset all the tool
callbacks and fails to find a matching event for a sample.
When pipe input is used, the event info is passed via ATTR records so it
needs to handle that operation. Otherwise the following error occurs.
Note, -14 (= -EFAULT) comes from evlist__parse_sample():
# perf record -a -o- sleep 1 | perf report -i- --stat
Can't parse sample, err = -14
0x271044 [0x38]: failed to process type: 9
Error:
failed to process sample
#
Committer testing:
Before:
$ perf record -o- sleep 1 | perf report -i- --stat
Can't parse sample, err = -14
[ perf record: Woken up 1 times to write data ]
0x1350 [0x30]: failed to process type: 9
Error:
failed to process sample
[ perf record: Captured and wrote 0.000 MB - ]
$
After:
$ perf record -o- sleep 1 | perf report -i- --stat
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
Aggregated stats:
TOTAL events: 41
COMM events: 2 ( 4.9%)
EXIT events: 1 ( 2.4%)
SAMPLE events: 9 (22.0%)
MMAP2 events: 4 ( 9.8%)
ATTR events: 1 ( 2.4%)
FINISHED_ROUND events: 1 ( 2.4%)
THREAD_MAP events: 1 ( 2.4%)
CPU_MAP events: 1 ( 2.4%)
EVENT_UPDATE events: 1 ( 2.4%)
TIME_CONV events: 1 ( 2.4%)
FEATURE events: 19 (46.3%)
cycles:uhH stats:
SAMPLE events: 9
$
Fixes: a4a4d0a7a2 ("perf report: Add --stats option to display quick data statistics")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210630043058.1131295-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull RCU updates from Paul McKenney:
- Bitmap parsing support for "all" as an alias for all bits
- Documentation updates
- Miscellaneous fixes, including some that overlap into mm and lockdep
- kvfree_rcu() updates
- mem_dump_obj() updates, with acks from one of the slab-allocator
maintainers
- RCU NOCB CPU updates, including limited deoffloading
- SRCU updates
- Tasks-RCU updates
- Torture-test updates
* 'core-rcu-2021.07.04' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (78 commits)
tasks-rcu: Make show_rcu_tasks_gp_kthreads() be static inline
rcu-tasks: Make ksoftirqd provide RCU Tasks quiescent states
rcu: Add missing __releases() annotation
rcu: Remove obsolete rcu_read_unlock() deadlock commentary
rcu: Improve comments describing RCU read-side critical sections
rcu: Create an unrcu_pointer() to remove __rcu from a pointer
srcu: Early test SRCU polling start
rcu: Fix various typos in comments
rcu/nocb: Unify timers
rcu/nocb: Prepare for fine-grained deferred wakeup
rcu/nocb: Only cancel nocb timer if not polling
rcu/nocb: Delete bypass_timer upon nocb_gp wakeup
rcu/nocb: Cancel nocb_timer upon nocb_gp wakeup
rcu/nocb: Allow de-offloading rdp leader
rcu/nocb: Directly call __wake_nocb_gp() from bypass timer
rcu: Don't penalize priority boosting when there is nothing to boost
rcu: Point to documentation of ordering guarantees
rcu: Make rcu_gp_cleanup() be noinline for tracing
rcu: Restrict RCU_STRICT_GRACE_PERIOD to at most four CPUs
rcu: Make show_rcu_gp_kthreads() dump rcu_node structures blocking GP
...
Pull lkmm fixlet from Paul E McKenney.
Fix missing underscore in Linux-kernel memory model docs.
* 'lkmm.2021.05.10c' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/memory-model: Fix smp_mb__after_spinlock() spelling
Pull tracing updates from Steven Rostedt:
- Added option for per CPU threads to the hwlat tracer
- Have hwlat tracer handle hotplug CPUs
- New tracer: osnoise, that detects latency caused by interrupts,
softirqs and scheduling of other tasks.
- Added timerlat tracer that creates a thread and measures in detail
what sources of latency it has for wake ups.
- Removed the "success" field of the sched_wakeup trace event. This has
been hardcoded as "1" since 2015, no tooling should be looking at it
now. If one exists, we can revert this commit, fix that tool and try
to remove it again in the future.
- tgid mapping fixed to handle more than PID_MAX_DEFAULT pids/tgids.
- New boot command line option "tp_printk_stop", as tp_printk causes
trace events to write to console. When user space starts, this can
easily live lock the system. Having a boot option to stop just after
boot up is useful to prevent that from happening.
- Have ftrace_dump_on_oops boot command line option take numbers that
match the numbers shown in /proc/sys/kernel/ftrace_dump_on_oops.
- Bootconfig clean ups, fixes and enhancements.
- New ktest script that tests bootconfig options.
- Add tracepoint_probe_register_may_exist() to register a tracepoint
without triggering a WARN*() if it already exists. BPF has a path
from user space that can do this. All other paths are considered a
bug.
- Small clean ups and fixes
* tag 'trace-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (49 commits)
tracing: Resize tgid_map to pid_max, not PID_MAX_DEFAULT
tracing: Simplify & fix saved_tgids logic
treewide: Add missing semicolons to __assign_str uses
tracing: Change variable type as bool for clean-up
trace/timerlat: Fix indentation on timerlat_main()
trace/osnoise: Make 'noise' variable s64 in run_osnoise()
tracepoint: Add tracepoint_probe_register_may_exist() for BPF tracing
tracing: Fix spelling in osnoise tracer "interferences" -> "interference"
Documentation: Fix a typo on trace/osnoise-tracer
trace/osnoise: Fix return value on osnoise_init_hotplug_support
trace/osnoise: Make interval u64 on osnoise_main
trace/osnoise: Fix 'no previous prototype' warnings
tracing: Have osnoise_main() add a quiescent state for task rcu
seq_buf: Make trace_seq_putmem_hex() support data longer than 8
seq_buf: Fix overflow in seq_buf_putmem_hex()
trace/osnoise: Support hotplug operations
trace/hwlat: Support hotplug operations
trace/hwlat: Protect kdata->kthread with get/put_online_cpus
trace: Add timerlat tracer
trace: Add osnoise tracer
...
Pull Kselftest update from Shuah Khan:
"Fixes to existing tests and framework:
- migrate sgx test to kselftest harness
- add new test cases to sgx test
- ftrace test fix event-no-pid on 1-core machine
- splice test adjust for handler fallback removal"
* tag 'linux-kselftest-next-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/sgx: remove checks for file execute permissions
selftests/ftrace: fix event-no-pid on 1-core machine
selftests/sgx: Refine the test enclave to have storage
selftests/sgx: Add EXPECT_EEXIT() macro
selftests/sgx: Dump enclave memory map
selftests/sgx: Migrate to kselftest harness
selftests/sgx: Rename 'eenter' and 'sgx_call_vdso'
selftests: timers: rtcpie: skip test if default RTC device does not exist
selftests: lib.mk: Also install "config" and "settings"
selftests: splice: Adjust for handler fallback removal
selftests/tls: Add {} to avoid static checker warning
selftests/resctrl: Fix incorrect parsing of option "-t"
Pull KUnit update from Shuah Khan:
"Fixes and features:
- add support for skipped tests
- introduce kunit_kmalloc_array/kunit_kcalloc() helpers
- add gnu_printf specifiers
- add kunit_shutdown
- add unit test for filtering suites by names
- convert lib/test_list_sort.c to use KUnit
- code organization moving default config to tools/testing/kunit
- refactor of internal parser input handling
- cleanups and updates to documentation
- code cleanup related to casts"
* tag 'linux-kselftest-kunit-fixes-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits)
kunit: add unit test for filtering suites by names
kasan: test: make use of kunit_skip()
kunit: test: Add example tests which are always skipped
kunit: tool: Support skipped tests in kunit_tool
kunit: Support skipped tests
thunderbolt: test: Reinstate a few casts of bitfields
kunit: tool: internal refactor of parser input handling
lib/test: convert lib/test_list_sort.c to use KUnit
kunit: introduce kunit_kmalloc_array/kunit_kcalloc() helpers
kunit: Remove the unused all_tests.config
kunit: Move default config from arch/um -> tools/testing/kunit
kunit: arch/um/configs: Enable KUNIT_ALL_TESTS by default
kunit: Add gnu_printf specifiers
lib/cmdline_kunit: Remove a cast which are no-longer required
kernel/sysctl-test: Remove some casts which are no-longer required
thunderbolt: test: Remove some casts which are no longer required
mmc: sdhci-of-aspeed: Remove some unnecessary casts from KUnit tests
iio: Remove a cast in iio-test-format which is no longer required
device property: Remove some casts in property-entry-test
Documentation: kunit: Clean up some string casts in examples
...
Pull powerpc updates from Michael Ellerman:
- A big series refactoring parts of our KVM code, and converting some
to C.
- Support for ARCH_HAS_SET_MEMORY, and ARCH_HAS_STRICT_MODULE_RWX on
some CPUs.
- Support for the Microwatt soft-core.
- Optimisations to our interrupt return path on 64-bit.
- Support for userspace access to the NX GZIP accelerator on PowerVM on
Power10.
- Enable KUAP and KUEP by default on 32-bit Book3S CPUs.
- Other smaller features, fixes & cleanups.
Thanks to: Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Baokun Li, Benjamin Herrenschmidt, Bharata B Rao, Christophe
Leroy, Daniel Axtens, Daniel Henrique Barboza, Finn Thain, Geoff Levand,
Haren Myneni, Jason Wang, Jiapeng Chong, Joel Stanley, Jordan Niethe,
Kajol Jain, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas
Piggin, Nick Desaulniers, Paul Mackerras, Russell Currey, Sathvika
Vasireddy, Shaokun Zhang, Stephen Rothwell, Sudeep Holla, Suraj Jitindar
Singh, Tom Rix, Vaibhav Jain, YueHaibing, Zhang Jianhua, and Zhen Lei.
* tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (218 commits)
powerpc: Only build restart_table.c for 64s
powerpc/64s: move ret_from_fork etc above __end_soft_masked
powerpc/64s/interrupt: clean up interrupt return labels
powerpc/64/interrupt: add missing kprobe annotations on interrupt exit symbols
powerpc/64: enable MSR[EE] in irq replay pt_regs
powerpc/64s/interrupt: preserve regs->softe for NMI interrupts
powerpc/64s: add a table of implicit soft-masked addresses
powerpc/64e: remove implicit soft-masking and interrupt exit restart logic
powerpc/64e: fix CONFIG_RELOCATABLE build warnings
powerpc/64s: fix hash page fault interrupt handler
powerpc/4xx: Fix setup_kuep() on SMP
powerpc/32s: Fix setup_{kuap/kuep}() on SMP
powerpc/interrupt: Use names in check_return_regs_valid()
powerpc/interrupt: Also use exit_must_hard_disable() on PPC32
powerpc/sysfs: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE
powerpc/ptrace: Refactor regs_set_return_{msr/ip}
powerpc/ptrace: Move set_return_regs_changed() before regs_set_return_{msr/ip}
powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()
powerpc/pseries/vas: Include irqdomain.h
powerpc: mark local variables around longjmp as volatile
...
Pull perf tool updates from Arnaldo Carvalho de Melo:
"Tools:
- Add cgroup support for 'perf top' (-G).
- Add support for KVM MSRs in 'perf kvm stat'
- Support probes on init functions in 'perf probe', to support the
bootconfig format.
- Improve error reporting in 'perf probe'.
- No need to synthesize BUILD_ID records in 'perf inject' if the
MMAP2 records have build ids already.
- Allow toggling source code ('s' hotkey) in 'perf annotate' in all
lines.
- Add itrace options support to 'perf annotate'.
- Support to custom DSO filters for 'perf script'.
Hardware enablement:
- Support the HYBRID_TOPOLOGY and HYBRID_CPU_PMU_CAPS features in the
perf.data file header.
- Support PMU prefix for mem-load and mem-store events, to support
hybrid (BIG little) CPUs such as Intel's Alderlake.
- Support hybrid CPUs in 'perf mem' and 'perf c2c'.
Hardware tracing:
- Intel PT now supports tracing KVM guests.
- Timestamp improvements for ARM's Coresight.
Build:
- Add 'make -C tools/perf build-test' entries for
libopencsd/CORESIGHT=1 and libbpf/LIBBPF_DYNAMIC=1.
- Use bison's --file-prefix-map option to avoid storing full paths
when using O= in the perf build.
Tests:
- Improve the 'perf test' entries for libpfm4 and BPF counters.
Misc:
- Sync msr-index.h, mount.h, kvm headers with the kernel originals.
- Add vendor events and metrics for Intel's Icelake Server & Client"
* tag 'perf-tools-for-v5.14-2021-07-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (123 commits)
perf session: Add missing evlist__delete when deleting a session
perf annotate: Allow 's' on source code lines
perf dlfilter: Add object_code() to perf_dlfilter_fns
perf dlfilter: Add attr() to perf_dlfilter_fns
perf dlfilter: Add srcline() to perf_dlfilter_fns
perf dlfilter: Add insn() to perf_dlfilter_fns
perf dlfilter: Add resolve_address() to perf_dlfilter_fns
perf build: Install perf_dlfilter.h
perf script: Add option to pass arguments to dlfilters
perf script: Add option to list dlfilters
perf script: Add dlfilter__filter_event_early()
perf script: Add API for filtering via dynamically loaded shared object
perf llvm: Return -ENOMEM when asprintf() fails
perf cs-etm: Delay decode of non-timeless data until cs_etm__flush_events()
tools headers UAPI: Synch KVM's svm.h header with the kernel
tools kvm headers arm64: Update KVM headers from the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers cpufeatures: Sync with the kernel sources
tools include UAPI: Update linux/mount.h copy
tools arch x86: Sync the msr-index.h copy with the kernel sources
...
Merge more updates from Andrew Morton:
"190 patches.
Subsystems affected by this patch series: mm (hugetlb, userfaultfd,
vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock,
migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap,
zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc,
core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs,
signals, exec, kcov, selftests, compress/decompress, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
ipc/util.c: use binary search for max_idx
ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock
ipc: use kmalloc for msg_queue and shmid_kernel
ipc sem: use kvmalloc for sem_undo allocation
lib/decompressors: remove set but not used variabled 'level'
selftests/vm/pkeys: exercise x86 XSAVE init state
selftests/vm/pkeys: refill shadow register after implicit kernel write
selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
kcov: add __no_sanitize_coverage to fix noinstr for all architectures
exec: remove checks in __register_bimfmt()
x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned
hfsplus: report create_date to kstat.btime
hfsplus: remove unnecessary oom message
nilfs2: remove redundant continue statement in a while-loop
kprobes: remove duplicated strong free_insn_page in x86 and s390
init: print out unknown kernel parameters
checkpatch: do not complain about positive return values starting with EPOLL
checkpatch: improve the indented label test
checkpatch: scripts/spdxcheck.py now requires python3
...
Pull cgroup updates from Tejun Heo:
- cgroup.kill is added which implements atomic killing of the whole
subtree.
Down the line, this should be able to replace the multiple userland
implementations of "keep killing till empty".
- PSI can now be turned off at boot time to avoid overhead for
configurations which don't care about PSI.
* 'for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: make per-cgroup pressure stall tracking configurable
cgroup: Fix kernel-doc
cgroup: inline cgroup_task_freeze()
tests/cgroup: test cgroup.kill
tests/cgroup: move cg_wait_for(), cg_prepare_for_wait()
tests/cgroup: use cgroup.kill in cg_killall()
docs/cgroup: add entry for cgroup.kill
cgroup: introduce cgroup.kill
TCP connections in UNREPLIED state (only SYN seen) can be kept alive
indefinitely, as each SYN re-sets the timeout.
This means that even if a peer has closed its socket the entry
never times out.
This also prevents re-evaluation of configured NAT rules.
Add a test case that sets SYN timeout to 10 seconds, then check
that the nat redirection added later eventually takes effect.
This is based off a repro script from Antonio Ojea.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ASan reports a memory leak caused by evlist not being deleted on exit in
perf-report, perf-script and perf-data.
The problem is caused by evlist->session not being deleted, which is
allocated in perf_session__read_header, called in perf_session__new if
perf_data is in read mode.
In case of write mode, the session->evlist is filled by the caller.
This patch solves the problem by calling evlist__delete in
perf_session__delete if perf_data is in read mode.
Changes in v2:
- call evlist__delete from within perf_session__delete
v1: https://lore.kernel.org/lkml/20210621234317.235545-1-rickyman7@gmail.com/
ASan report follows:
$ ./perf script report flamegraph
=================================================================
==227640==ERROR: LeakSanitizer: detected memory leaks
<SNIP unrelated>
Indirect leak of 2704 byte(s) in 1 object(s) allocated from:
#0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
#1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
#2 0x7f999e in evlist__new /home/user/linux/tools/perf/util/evlist.c:77:26
#3 0x8ad938 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3797:20
#4 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
#5 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
#6 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
#7 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#8 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#9 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#10 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
#11 0x7f5260654b74 (/lib64/libc.so.6+0x27b74)
Indirect leak of 568 byte(s) in 1 object(s) allocated from:
#0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
#1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
#2 0x80ce88 in evsel__new_idx /home/user/linux/tools/perf/util/evsel.c:268:24
#3 0x8aed93 in evsel__new /home/user/linux/tools/perf/util/evsel.h:210:9
#4 0x8ae07e in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3853:11
#5 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
#6 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
#7 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
#8 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#9 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#10 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#11 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
#12 0x7f5260654b74 (/lib64/libc.so.6+0x27b74)
Indirect leak of 264 byte(s) in 1 object(s) allocated from:
#0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
#1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
#2 0xbe3e70 in xyarray__new /home/user/linux/tools/lib/perf/xyarray.c:10:23
#3 0xbd7754 in perf_evsel__alloc_id /home/user/linux/tools/lib/perf/evsel.c:361:21
#4 0x8ae201 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3871:7
#5 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
#6 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
#7 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
#8 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#9 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#10 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#11 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
#12 0x7f5260654b74 (/lib64/libc.so.6+0x27b74)
Indirect leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
#1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
#2 0xbd77e0 in perf_evsel__alloc_id /home/user/linux/tools/lib/perf/evsel.c:365:14
#3 0x8ae201 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3871:7
#4 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
#5 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
#6 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
#7 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#8 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#9 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#10 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
#11 0x7f5260654b74 (/lib64/libc.so.6+0x27b74)
Indirect leak of 7 byte(s) in 1 object(s) allocated from:
#0 0x4b8207 in strdup (/home/user/linux/tools/perf/perf+0x4b8207)
#1 0x8b4459 in evlist__set_event_name /home/user/linux/tools/perf/util/header.c:2292:16
#2 0x89d862 in process_event_desc /home/user/linux/tools/perf/util/header.c:2313:3
#3 0x8af319 in perf_file_section__process /home/user/linux/tools/perf/util/header.c:3651:9
#4 0x8aa6e9 in perf_header__process_sections /home/user/linux/tools/perf/util/header.c:3427:9
#5 0x8ae3e7 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3886:2
#6 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
#7 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
#8 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
#9 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#10 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#11 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#12 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
#13 0x7f5260654b74 (/lib64/libc.so.6+0x27b74)
SUMMARY: AddressSanitizer: 3728 byte(s) leaked in 7 allocation(s).
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210624231926.212208-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
