This driver fails to build in random configurations:
drivers/accel/amdxdna/aie2_solver.c: In function 'remove_partition_node':
drivers/accel/amdxdna/aie2_solver.c:121:9: error: implicit declaration of function 'kfree' [-Wimplicit-function-declaration]
121 | kfree(pt_node);
| ^~~~~
drivers/accel/amdxdna/aie2_solver.c: In function 'get_free_partition':
drivers/accel/amdxdna/aie2_solver.c:153:19: error: implicit declaration of function 'kzalloc' [-Wimplicit-function-declaration]
153 | pt_node = kzalloc(sizeof(*pt_node), GFP_KERNEL);
Add the missing include.
Fixes: c88d3325ae ("accel/amdxdna: Add hardware resource solver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241218085902.2684002-1-arnd@kernel.org
Add SET_STATE ioctl to configure device power mode for aie2 device.
Three modes are supported initially.
POWER_MODE_DEFAULT: Enable clock gating and set DPM (Dynamic Power
Management) level to value which has been set by resource solver or
maximum DPM level the device supports.
POWER_MODE_HIGH: Enable clock gating and set DPM level to maximum DPM
level the device supports.
POWER_MODE_TURBO: Disable clock gating and set DPM level to maximum DPM
level the device supports.
Disabling clock gating means all clocks always run on full speed. And
the different clock frequency are used based on DPM level been set.
Initially, the driver set the power mode to default mode.
Co-developed-by: Narendra Gutta <VenkataNarendraKumar.Gutta@amd.com>
Signed-off-by: Narendra Gutta <VenkataNarendraKumar.Gutta@amd.com>
Co-developed-by: George Yang <George.Yang@amd.com>
Signed-off-by: George Yang <George.Yang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213232933.1545388-4-lizhi.hou@amd.com
The old SET_SYSTEM_SLEEP_PM_OPS and SET_RUNTIME_PM_OPS macros cause a build
warning when CONFIG_PM is disabled:
drivers/accel/amdxdna/amdxdna_pci_drv.c:343:12: error: 'amdxdna_pmops_resume' defined but not used [-Werror=unused-function]
343 | static int amdxdna_pmops_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~
drivers/accel/amdxdna/amdxdna_pci_drv.c:328:12: error: 'amdxdna_pmops_suspend' defined but not used [-Werror=unused-function]
328 | static int amdxdna_pmops_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~
Change these to the modern replacements.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Tested-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241213090259.68492-1-arnd@kernel.org
The v6.13-rc2 release included a bunch of breaking changes,
specifically the MODULE_IMPORT_NS commit.
Backmerge in order to fix them before the next pull-request.
Include the fix from Stephen Roswell.
Caused by commit
25c3fd1183 ("drm/virtio: Add a helper to map and note the dma addrs and lengths")
Interacting with commit
cdd30ebb1b ("module: Convert symbol namespace to string literal")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
There different types of BOs are supported:
- shmem
A user application uses shmem BOs as input/output for its workload running
on NPU.
- device memory heap
The fixed size buffer dedicated to the device.
- device buffer
The buffer object allocated from device memory heap.
- command buffer
The buffer object created for delivering commands. The command buffer
object is small and pinned on creation.
New IOCTLs are added: CREATE_BO, GET_BO_INFO, SYNC_BO. SYNC_BO is used
to explicitly flush CPU cache for BO memory.
Co-developed-by: Min Ma <min.ma@amd.com>
Signed-off-by: Min Ma <min.ma@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118172942.2014541-7-lizhi.hou@amd.com
The hardware can be shared among multiple user applications. The
hardware resources are allocated/freed based on the request from
user application via driver IOCTLs.
DRM_IOCTL_AMDXDNA_CREATE_HWCTX
Allocate tile columns and create a hardware context structure to track the
usage and status of the resources. A hardware context ID is returned for
XDNA command execution.
DRM_IOCTL_AMDXDNA_DESTROY_HWCTX
Release hardware context based on its ID. The tile columns belong to
this hardware context will be reclaimed.
DRM_IOCTL_AMDXDNA_CONFIG_HWCTX
Config hardware context. Bind the hardware context to the required
resources.
Co-developed-by: Min Ma <min.ma@amd.com>
Signed-off-by: Min Ma <min.ma@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118172942.2014541-6-lizhi.hou@amd.com
The hardware mailboxes are used by the driver to submit requests to
firmware and receive the completion notices from hardware.
Initially, a management mailbox channel is up and running. The driver may
request firmware to create/destroy more channels dynamically through
management channel.
Add driver internal mailbox interfaces.
- create/destroy a mailbox channel instance
- send a message to the firmware through a specific channel
- wait for a notification from the specific channel
Co-developed-by: George Yang <George.Yang@amd.com>
Signed-off-by: George Yang <George.Yang@amd.com>
Co-developed-by: Min Ma <min.ma@amd.com>
Signed-off-by: Min Ma <min.ma@amd.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118172942.2014541-4-lizhi.hou@amd.com
Defer root page table allocation and unify context init/fini functions.
Move allocation of the root page table from the file_priv_open function to
perform a lazy allocation approach during ivpu_bo_pin().
By doing so, we avoid the overhead of allocating page tables for simple
operations like GET_PARAM that do not require them.
Additionally, the MMU context descriptor table initialization has been
moved to the ivpu_mmu_context_map_page function.
This change streamlines the process and ensures that the descriptor table
is only initialized when it is actually needed.
Refactor init/fini functions to remove redundant code and make the context
management more straightforward.
Overall, these changes lead to a reduction in the time taken by the file
descriptor open operation, as the costly root page table allocation is now
avoided for operations that do not require it.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017145817.121590-3-jacek.lawrynowicz@linux.intel.com
The Sahara protocol has a crashdump functionality. In the hello
exchange, the device can advertise it has a memory dump available for
the host to collect. Instead of the device making requests of the host,
the host requests data from the device which can be later analyzed.
Implement this functionality and utilize the devcoredump framework for
handing the dump over to userspace.
Similar to how firmware loading in Sahara involves multiple files,
crashdump can consist of multiple files for different parts of the dump.
Structure these into a single buffer that userspace can parse and
extract the original files from.
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241021200355.544126-1-quic_jhugo@quicinc.com
Recently I noticed that both gcc-14 and clang-18 report that passing
a non-string literal as the format argument of alloc_workqueue()
is potentially insecure.
E.g. clang-18 says:
.../qaic_drv.c:61:23: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
61 | wq = alloc_workqueue(fmt, WQ_UNBOUND, 0);
| ^~~
.../qaic_drv.c:61:23: note: treat the string as an argument to avoid this
61 | wq = alloc_workqueue(fmt, WQ_UNBOUND, 0);
| ^
| "%s",
It is always the case where the contents of fmt is safe to pass as the
format argument. That is, in my understanding, it never contains any
format escape sequences.
But, it seems better to be safe than sorry. And, as a bonus, compiler
output becomes less verbose by addressing this issue as suggested by
clang-18.
Also, change the name of the parameter of qaicm_wq_init from
fmt to name to better reflect it's purpose.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241011-string-thing-v1-3-acc506568033@kernel.org
