Adapt to changes in commit 9133607de3 ("exit: fix the usage of
delay_group_leader->exit_code in do_notify_parent() and pidfs_exit()").
Even if the thread-group leader exited early and succesfully it's exit
status will only be reported once the whole thread-group has exited and
it will share the exit code of the thread-group. So if the thread-group
was SIGKILLed the thread-group leader will also be reported as having
been SIGKILLed.
Link: https://lore.kernel.org/r/20250403-work-pidfd-fixes-v1-1-a123b6ed6716@kernel.org
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Support up to 8192 processors
Add cpuidle governor debug telemetry, disabled by default
Update default output to exclude cpuidle invocation counts
Bug fixes
Signed-off-by: Len Brown <len.brown@intel.com>
Create "pct_idle" counter group, the sofware notion of residency
so it can now be singled out, independent of other counter groups.
Create "cpuidle" group, the cpuidle invocation counts.
Disable "cpuidle", by default.
Create "swidle" = "cpuidle" + "pct_idle".
Undocument "sysfs", the old name for "swidle", but keep it working
for backwards compatibilty.
Create "hwidle", all the HW idle counters
Modify "idle", enabled by default
"idle" = "hwidle" + "pct_idle" (and now excludes "cpuidle")
Signed-off-by: Len Brown <len.brown@intel.com>
Atomic instructions such as 'ldset' in the guest have been observed to
cause an EL1 data abort with FSC 0x35 (IMPLEMENTATION DEFINED fault
(Unsupported Exclusive or Atomic access)) on Neoverse-N3.
Per DDI0487L.a B2.2.6, atomic instructions are only architecturally
guaranteed for Inner/Outer Shareable Normal Write-Back memory. For
anything else the behavior is IMPLEMENTATION DEFINED and can lose
atomicity, or, in this case, generate an abort.
It would appear that selftests sets up the stage-1 mappings as Non
Shareable, leading to the observed abort. Explicitly set the
Shareability field to Inner Shareable for non-LPA2 page tables. Note
that for the LPA2 page table format, translations for cacheable memory
inherit the shareability attribute of the PTW, i.e. TCR_ELx.SH{0,1}.
Suggested-by: Oliver Upton <oupton@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20250405001042.1470552-3-rananta@google.com
[oliver: Rephrase changelog]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The kvm selftest library for arm64 currently configures the hardware
fields, such as shift and mask in the page-table entries and registers,
directly with numbers. While it add comments at places, it's better to
rewrite them with appropriate macros to improve the readability and
reduce the risk of errors. Hence, introduce macros to define the
hardware fields and use them in the arm64 processor library.
Most of the definitions are primary copied from the Linux's header,
arch/arm64/include/asm/pgtable-hwdef.h.
No functional change intended.
Suggested-by: Oliver Upton <oupton@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20250405001042.1470552-2-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Probe cpuidle "sysfs" residency and counts separately,
since soon we will make one disabled on, and the
other disabled off.
Clarify that some BIC (build-in-counters) are actually "groups".
since we're about to re-name some of those groups.
no functional change.
Signed-off-by: Len Brown <len.brown@intel.com>
Do fflush() to discard the buffered data, before each read of the
graphics sysfs knobs.
Fixes: ba99a4fc8c ("tools/power turbostat: Remove unnecessary fflush() call")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Document that on Intel Granite Rapids Systems,
Uncore domains 0-2 are CPU domains, and
uncore domains 3-4 are IO domains.
Signed-off-by: Len Brown <len.brown@intel.com>
The CoreThr column displays total thermal throttling events
since boot time.
Change it to report events during the measurement interval.
This is more useful for showing a user the current conditions.
Total events since boot time are still available to the user via
/sys/devices/system/cpu/cpu*/thermal_throttle/*
Document CoreThr on turbostat.8
Fixes: eae97e053f ("turbostat: Support thermal throttle count print")
Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: Chen Yu <yu.c.chen@intel.com>
On systems with >= 1024 cpus (in my case 1152), turbostat fails with the error output:
"turbostat: /sys/fs/cgroup/cpuset.cpus.effective: cpu str malformat 0-1151"
A similar error appears with the use of turbostat --cpu when the inputted cpu
range contains a cpu number >= 1024:
# turbostat -c 1100-1151
"--cpu 1100-1151" malformed
...
Both errors are caused by parse_cpu_str() reaching its limit of CPU_SUBSET_MAXCPUS.
It's a good idea to limit the maximum cpu number being parsed, but 1024 is too low.
For a small increase in compute and allocated memory, increasing CPU_SUBSET_MAXCPUS
brings support for parsing cpu numbers >= 1024.
Increase CPU_SUBSET_MAXCPUS to 8192, a common setting for CONFIG_NR_CPUS on x86_64.
Signed-off-by: Justin Ernst <justin.ernst@hpe.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Currently, the res_spin_lock test is too chatty as it constantly prints
the test_run results for each iteration in each thread, so in case
verbose output is requested or things go wrong, it will flood the logs
of CI and other systems with repeated messages that offer no valuable
insight. Reduce this by doing assertions when the condition actually
flips, and proceed to break out and exit the threads. We still assert
to mark the test as failed and print the expected and reported values.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250403220841.66654-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This non-functional change serves as preparation for moving to
subsystem-based rstat trees. To simplify future commits, change the
signatures of existing cgroup-based rstat functions to become css-based and
rename them to reflect that.
Though the signatures have changed, the implementations have not. Within
these functions use the css->cgroup pointer to obtain the associated cgroup
and allow code to function the same just as it did before this patch. At
applicable call sites, pass the subsystem-specific css pointer as an
argument or pass a pointer to cgroup::self if not in subsystem context.
Note that cgroup_rstat_updated_list() and cgroup_rstat_push_children()
are not altered yet since there would be a larger amount of css to
cgroup conversions which may overcomplicate the code at this
intermediate phase.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The tag "ops" is used for two different purposes. First, to indicate that
the entity is directly related to the operations such as flags carried in
sched_ext_ops. Second, to indicate that the entity applies to something
global such as enable or bypass states. The second usage is historical and
causes confusion rather than clarifying anything. For example,
scx_ops_enable_state enums are named SCX_OPS_* and thus conflict with
scx_ops_flags. Let's drop the second usages.
Drop "ops" from scx_ops_bypass(), scx_ops_breather() and friends. Update
scx_show_state.py accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
The tag "ops" is used for two different purposes. First, to indicate that
the entity is directly related to the operations such as flags carried in
sched_ext_ops. Second, to indicate that the entity applies to something
global such as enable or bypass states. The second usage is historical and
causes confusion rather than clarifying anything. For example,
scx_ops_enable_state enums are named SCX_OPS_* and thus conflict with
scx_ops_flags. Let's drop the second usages.
Drop "ops" from scx_ops_helper, scx_ops_enable_mutex and __scx_ops_enabled.
Update scx_show_state.py accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
The tag "ops" is used for two different purposes. First, to indicate that
the entity is directly related to the operations such as flags carried in
sched_ext_ops. Second, to indicate that the entity applies to something
global such as enable or bypass states. The second usage is historical and
causes confusion rather than clarifying anything. For example,
scx_ops_enable_state enums are named SCX_OPS_* and thus conflict with
scx_ops_flags. Let's drop the second usages.
Drop "ops" from scx_ops_enable_state and friends. Update scx_show_state.py
accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
Pull RISC-V updates from Palmer Dabbelt:
- The sub-architecture selection Kconfig system has been cleaned up,
the documentation has been improved, and various detections have been
fixed
- The vector-related extensions dependencies are now validated when
parsing from device tree and in the DT bindings
- Misaligned access probing can be overridden via a kernel command-line
parameter, along with various fixes to misalign access handling
- Support for relocatable !MMU kernels builds
- Support for hpge pfnmaps, which should improve TLB utilization
- Support for runtime constants, which improves the d_hash()
performance
- Support for bfloat16, Zicbom, Zaamo, Zalrsc, Zicntr, Zihpm
- Various fixes, including:
- We were missing a secondary mmu notifier call when flushing the
tlb which is required for IOMMU
- Fix ftrace panics by saving the registers as expected by ftrace
- Fix a couple of stimecmp usage related to cpu hotplug
- purgatory_start is now aligned as per the STVEC requirements
- A fix for hugetlb when calculating the size of non-present PTEs
* tag 'riscv-for-linus-6.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (65 commits)
riscv: Add norvc after .option arch in runtime const
riscv: Make sure toolchain supports zba before using zba instructions
riscv/purgatory: 4B align purgatory_start
riscv/kexec_file: Handle R_RISCV_64 in purgatory relocator
selftests: riscv: fix v_exec_initval_nolibc.c
riscv: Fix hugetlb retrieval of number of ptes in case of !present pte
riscv: print hartid on bringup
riscv: Add norvc after .option arch in runtime const
riscv: Remove CONFIG_PAGE_OFFSET
riscv: Support CONFIG_RELOCATABLE on riscv32
asm-generic: Always define Elf_Rel and Elf_Rela
riscv: Support CONFIG_RELOCATABLE on NOMMU
riscv: Allow NOMMU kernels to access all of RAM
riscv: Remove duplicate CONFIG_PAGE_OFFSET definition
RISC-V: errata: Use medany for relocatable builds
dt-bindings: riscv: document vector crypto requirements
dt-bindings: riscv: add vector sub-extension dependencies
dt-bindings: riscv: d requires f
RISC-V: add f & d extension validation checks
RISC-V: add vector crypto extension validation checks
...
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - regressions:
- four fixes for the netdev per-instance locking
Current release - new code bugs:
- consolidate more code between existing Rx zero-copy and uring so
that the latter doesn't miss / have to duplicate the safety checks
Previous releases - regressions:
- ipv6: fix omitted Netlink attributes when using SKIP_STATS
Previous releases - always broken:
- net: fix geneve_opt length integer overflow
- udp: fix multiple wrap arounds of sk->sk_rmem_alloc when it
approaches INT_MAX
- dsa: mvpp2: add a lock to avoid corruption of the shared TCAM
- dsa: airoha: fix issues with traffic QoS configuration / offload,
and flow table offload
Misc:
- touch up the Netlink YAML specs of old families to make them usable
for user space C codegen"
* tag 'net-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits)
selftests: net: amt: indicate progress in the stress test
netlink: specs: rt_route: pull the ifa- prefix out of the names
netlink: specs: rt_addr: pull the ifa- prefix out of the names
netlink: specs: rt_addr: fix get multi command name
netlink: specs: rt_addr: fix the spec format / schema failures
net: avoid false positive warnings in __net_mp_close_rxq()
net: move mp dev config validation to __net_mp_open_rxq()
net: ibmveth: make veth_pool_store stop hanging
arcnet: Add NULL check in com20020pci_probe()
ipv6: Do not consider link down nexthops in path selection
ipv6: Start path selection from the first nexthop
usbnet:fix NPE during rx_complete
net: octeontx2: Handle XDP_ABORTED and XDP invalid as XDP_DROP
net: fix geneve_opt length integer overflow
io_uring/zcrx: fix selftests w/ updated netdev Python helpers
selftests: net: use netdevsim in netns test
docs: net: document netdev notifier expectations
net: dummy: request ops lock
netdevsim: add dummy device notifiers
net: rename rtnl_net_debug to lock_debug
...
Since memfd_create() is not consistently available across different
bionic libc implementations, using memfd_create() directly can break
some Android builds:
tools/lib/bpf/linker.c:576:7: error: implicit declaration of function 'memfd_create' [-Werror,-Wimplicit-function-declaration]
576 | fd = memfd_create(filename, 0);
| ^
To fix this, relocate and inline the sys_memfd_create() helper so that
it can be used in "linker.c". Similar issues were previously fixed by
commit 9fa5e1a180 ("libbpf: Call memfd_create() syscall directly").
Fixes: 6d5e5e5d7c ("libbpf: Extend linker API to support in-memory ELF files")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250330211325.530677-1-cmllamas@google.com
Our CI expects output from the test at least once every 10 minutes.
The AMT test when running on debug kernel is just on the edge
of that time for the stress test. Improve the output:
- print the name of the test first, before starting it,
- output a dot every 10% of the way.
Output after:
TEST: amt discovery [ OK ]
TEST: IPv4 amt multicast forwarding [ OK ]
TEST: IPv6 amt multicast forwarding [ OK ]
TEST: IPv4 amt traffic forwarding torture .......... [ OK ]
TEST: IPv6 amt traffic forwarding torture .......... [ OK ]
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250403145636.2891166-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
YAML specs don't normally include the C prefix name in the name
of the YAML attr. Remove the ifa- prefix from all attributes
in addr-attrs and specify name-prefix instead.
This is a bit risky, hopefully there aren't many users out there.
Fixes: dfb0f7d9d9 ("doc/netlink: Add spec for rt addr messages")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250403013706.2828322-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a "-l <latency>" param to the rseq test so that the user can override
/dev/cpu_dma_latency, as described by the test's suggested workaround for
not being able to complete enough migrations.
cpu_dma_latency is not a normal file, even as far as procfs files go.
Writes to cpu_dma_latency only persist so long as the file is open, e.g.
so that the kernel automatically reverts back to a power-optimized state
once the sensitive workload completes. Provide the necessary functionality
instead of effectively forcing the user to write a non-obvious wrapper.
Cc: Dongsheng Zhang <dongsheng.x.zhang@intel.com>
Cc: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250401142238.819487-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several tests cover infrastructure from virt/kvm/ and userspace APIs that have
only minimal requirements from architecture-specific code. As such, they are
available on all architectures that have libkvm support, and this presumably
will apply also in the future (for example if loongarch gets selftests support).
Put them in a separate variable and list them only once.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250401141327.785520-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Run each testcase in a separate VMs to cover more possibilities;
move WRMSR close to MONITOR/MWAIT to test updating CPUID bits
while in the VM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull more io_uring updates from Jens Axboe:
"Set of fixes/updates for io_uring that should go into this release.
The ublk bits could've gone via either tree - usually I put them in
block, but they got a bit mixed this series with the zero-copy
supported that ended up dipping into both trees.
This contains:
- Fix for sendmsg zc, include in pinned pages accounting like we do
for the other zc types
- Series for ublk fixing request aborting, doing various little
cleanups, fixing some zc issues, and adding queue_rqs support
- Another ublk series doing some code cleanups
- Series cleaning up the io_uring send path, mostly in preparation
for registered buffers
- Series doing little MSG_RING cleanups
- Fix for the newly added zc rx, fixing len being 0 for the last
invocation of the callback
- Add vectored registered buffer support for ublk. With that, then
ublk also supports this feature in the kernel revision where it
could generically introduced for rw/net
- A bunch of selftest additions for ublk. This is the majority of the
diffstat
- Silence a KCSAN data race warning for io-wq
- Various little cleanups and fixes"
* tag 'io_uring-6.15-20250403' of git://git.kernel.dk/linux: (44 commits)
io_uring: always do atomic put from iowq
selftests: ublk: enable zero copy for stripe target
io_uring: support vectored kernel fixed buffer
block: add for_each_mp_bvec()
io_uring: add validate_fixed_range() for validate fixed buffer
selftests: ublk: kublk: fix an error log line
selftests: ublk: kublk: use ioctl-encoded opcodes
io_uring/zcrx: return early from io_zcrx_recv_skb if readlen is 0
io_uring/net: avoid import_ubuf for regvec send
io_uring/rsrc: check size when importing reg buffer
io_uring: cleanup {g,s]etsockopt sqe reading
io_uring: hide caches sqes from drivers
io_uring: make zcrx depend on CONFIG_IO_URING
io_uring: add req flag invariant build assertion
Documentation: ublk: remove dead footnote
selftests: ublk: specify io_cmd_buf pointer type
ublk: specify io_cmd_buf pointer type
io_uring: don't pass ctx to tw add remote helper
io_uring/msg: initialise msg request opcode
io_uring/msg: rename io_double_lock_ctx()
...
Pull RTC updates from Alexandre Belloni:
"We see a net reduction of the number of lines of code thanks to the
removal of a now unused driver and a testing tool that is not used
anymore. Apart from this, the max31335 driver gets support for a new
part number and pm8xxx gets UEFI support.
Core:
- setdate is removed as it has better replacements
- skip alarms with a second resolution when we know the RTC doesn't
support those.
Subsystem:
- remove unnecessary private struct members
- use devm_pm_set_wake_irq were relevant
Drivers:
- ds1307: stop disabling alarms on probe for DS1337, DS1339, DS1341
and DS3231
- max31335: add max31331 support
- pcf50633 is removed as support for the related SoC has been removed
- pcf85063: properly handle POR failures"
* tag 'rtc-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
rtc: remove 'setdate' test program
selftest: rtc: skip some tests if the alarm only supports minutes
rtc: mt6397: drop unused defines
rtc: pcf85063: replace dev_err+return with return dev_err_probe
rtc: pcf85063: do a SW reset if POR failed
rtc: max31335: Add driver support for max31331
dt-bindings: rtc: max31335: Add max31331 support
rtc: cros-ec: Avoid a couple of -Wflex-array-member-not-at-end warnings
dt-bindings: rtc: pcf2127: Reference spi-peripheral-props.yaml
rtc: rzn1: implement one-second accuracy for alarms
rtc: pcf50633: Remove
rtc: pm8xxx: implement qcom,no-alarm flag for non-HLOS owned alarm
rtc: pm8xxx: mitigate flash wear
rtc: pm8xxx: add support for uefi offset
dt-bindings: rtc: qcom-pm8xxx: document qcom,no-alarm flag
rtc: rv3032: drop WADA
rtc: rv3032: fix EERD location
rtc: pm8xxx: switch to devm_device_init_wakeup
rtc: pm8xxx: fix possible race condition
rtc: mpfs: switch to devm_device_init_wakeup
...
self-connect-ipv6 got slightly flaky on netdev:
> # timeout set to 120
> # selftests: net/tcp_ao: self-connect_ipv6
> # 1..5
> # # 708[lib/setup.c:250] rand seed 1742872572
> # TAP version 13
> # # 708[lib/proc.c:213] Snmp6 Ip6OutNoRoutes: 0 => 1
> # not ok 1 # error 708[self-connect.c:70] failed to connect()
> # ok 2 No unexpected trace events during the test run
> # # Planned tests != run tests (5 != 2)
> # # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:1
> ok 1 selftests: net/tcp_ao: self-connect_ipv6
I can not reproduce it on my machines, but judging by "Ip6OutNoRoutes"
there is no route to the local_addr (::1).
Looking at the kernel code, I see that kernel does add link-local
address automatically in init_loopback(), but that is called from
ipv6 notifier block. So, in turn the userspace that brought up
the loopback interface may see rtnetlink ACK earlier than
addrconf_notify() does it's job (at least, on a slow VM such as netdev).
Probably, for ipv4 it's the same, judging by inetdev_event().
The fix is quite simple: set the link-local route straight after
bringing the loopback interface. That will make it synchronous.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20250402-tcp-ao-selfconnect-flake-v1-1-8388d629ef3d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull bpf fixes from Alexei Starovoitov:
- Fix BPF selftests expectations of assembler output and struct layout
(Song Liu and Yonghong Song)
- Fix XSK error code when queue is full (Wang Liang)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Fix verifier_private_stack test failure
selftests/bpf: Fix verifier_bpf_fastcall test
selftests/bpf: Fix tests after fields reorder in struct file
xsk: Fix __xsk_generic_xmit() error code when cq is full
Pull more MM updates from Andrew Morton:
- The series "mm: fixes for fallouts from mem_init() cleanup" from Mike
Rapoport fixes a couple of issues with the just-merged "arch, mm:
reduce code duplication in mem_init()" series
- The series "MAINTAINERS: add my isub-entries to MM part." from Mike
Rapoport does some maintenance on MAINTAINERS
- The series "remove tlb_remove_page_ptdesc()" from Qi Zheng does some
cleanup work to the page mapping code
- The series "mseal system mappings" from Jeff Xu permits sealing of
"system mappings", such as vdso, vvar, vvar_vclock, vectors (arm
compat-mode), sigpage (arm compat-mode)
- Plus the usual shower of singleton patches
* tag 'mm-stable-2025-04-02-22-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
mseal sysmap: add arch-support txt
mseal sysmap: enable s390
selftest: test system mappings are sealed
mseal sysmap: update mseal.rst
mseal sysmap: uprobe mapping
mseal sysmap: enable arm64
mseal sysmap: enable x86-64
mseal sysmap: generic vdso vvar mapping
selftests: x86: test_mremap_vdso: skip if vdso is msealed
mseal sysmap: kernel config and header change
mm: pgtable: remove tlb_remove_page_ptdesc()
x86: pgtable: convert to use tlb_remove_ptdesc()
riscv: pgtable: unconditionally use tlb_remove_ptdesc()
mm: pgtable: convert some architectures to use tlb_remove_ptdesc()
mm: pgtable: change pt parameter of tlb_remove_ptdesc() to struct ptdesc*
mm: pgtable: make generic tlb_remove_table() use struct ptdesc
microblaze/mm: put mm_cmdline_setup() in .init.text section
mm/memory_hotplug: fix call folio_test_large with tail page in do_migrate_range
MAINTAINERS: mm: add entry for secretmem
MAINTAINERS: mm: add entry for numa memblocks and numa emulation
...
Pull sched_ext fixes from Tejun Heo:
- Calling scx_bpf_create_dsq() with the same ID would succeed creating
duplicate DSQs. Fix it to return -EEXIST.
- scx_select_cpu_dfl() fixes and cleanups.
- Synchronize tool/sched_ext with external scheduler repo. While this
isn't a fix. There's no risk to the kernel and it's better if they
stay synced closer.
* tag 'sched_ext-for-6.15-rc0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
tools/sched_ext: Sync with scx repo
sched_ext: initialize built-in idle state before ops.init()
sched_ext: create_dsq: Return -EEXIST on duplicate request
sched_ext: Remove a meaningless conditional goto in scx_select_cpu_dfl()
sched_ext: idle: Fix return code of scx_select_cpu_dfl()
Commit [1] moves percpu data on x86 from address 0x000... to address
0xfff...
Before [1]:
159020: 0000000000030700 0 OBJECT GLOBAL DEFAULT 23 pcpu_hot
After [1]:
152602: ffffffff83a3e034 4 OBJECT GLOBAL DEFAULT 35 pcpu_hot
As a result, verifier_bpf_fastcall tests should now expect a negative
value for pcpu_hot, IOW, the disassemble should show "r=" instead of
"w=".
Fix this in the test.
Note that, a later change created a new variable "cpu_number" for
bpf_get_smp_processor_id() [2]. The inlining logic is updated properly
as part of this change, so there is no need to fix anything on the
kernel side.
[1] commit 9d7de2aa8b ("x86/percpu/64: Use relative percpu offsets")
[2] commit 01c7bc5198 ("x86/smp: Move cpu number to percpu hot section")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250328193124.808784-1-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
