Marc Kleine-Budde says:
====================
pull-request: can 2025-09-10
The 1st patch is by Alex Tran and fixes the Documentation of the
struct bcm_msg_head.
Davide Caratti's patch enabled the VCAN driver as a module for the
Linux self tests.
Tetsuo Handa contributes 3 patches that fix various problems in the
CAN j1939 protocol.
Anssi Hannula's patch fixes a potential use-after-free in the
xilinx_can driver.
Geert Uytterhoeven's patch fixes the rcan_can's suspend to RAM on
R-Car Gen3 using PSCI.
* tag 'linux-can-fixes-for-6.17-20250910' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: rcar_can: rcar_can_resume(): fix s2ram with PSCI
can: xilinx_can: xcan_write_frame(): fix use-after-free of transmitted SKB
can: j1939: j1939_local_ecu_get(): undo increment when j1939_local_ecu_get() fails
can: j1939: j1939_sk_bind(): call j1939_priv_put() immediately when j1939_local_ecu_get() failed
can: j1939: implement NETDEV_UNREGISTER notification handler
selftests: can: enable CONFIG_CAN_VCAN as a module
docs: networking: can: change bcm_msg_head frames member to support flexible array
====================
Link: https://patch.msgid.link/20250910162907.948454-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ADD_ADDR can be retransmitted, and with, the parent commit, these
retransmissions can be sent quicker: from 2 minutes to less than one
second.
To avoid false positives where retransmitted ADD_ADDR causes higher
counters than expected, it is required to be more tolerant. Errors are
now only reported when fewer ADD_ADDRs have been sent/received, except
if no ADD_ADDR are expected.
Before the parent commit, the tolerance was present for each tests where
the ADD_ADDR could be retransmitted in a reasonable time (1 sec). Now
that all tests can have retransmitted ADD_ADDR, it is normal to apply
the same tolerance for all tests.
An alternative could be to disable the ADD_ADDR retransmissions by
default, but that's changing the default kernel behaviour. Plus,
ADD_ADDR retransmissions can be required for some tests. To avoid adding
exceptions to many tests, it seems better to increase the tolerance.
Later, we could add a new MIB counter to identify the ADD_ADDR
retransmissions, and remove the tolerance when this counter is
available.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250907-net-next-mptcp-add_addr-retrans-adapt-v1-2-824cc805772b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pmtu test takes nearly an hour when run on a debug kernel
(10min on a normal kernel, so the debug slow down is quite significant).
NIPA tries to ensure all results are delivered by a certain deadline
so this prevents it from retrying the test in case of a flake.
Looks like one of the slowest operations in the test is calling out
to ./openvswitch/ovs-dpctl.py to remove potential leftover OvS interfaces.
Check whether the interfaces exist in the first place in sysfs,
since it can be done directly in bash it is very fast.
This should save us around 20-30% of the test runtime.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250906214535.3204785-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
icecc is a compiler wrapper that distributes compile jobs over a build
farm [1]. It works by sending toolchain binaries and preprocessed
source code to remote machines.
Unfortunately using it with BPF selftests causes build failures due to
a clang bug [2]. The problem is that clang suppresses the
-Wunused-value warning if the unused expression comes from a macro
expansion. Since icecc compiles preprocessed source code, this
information is not available. This leads to -Wunused-value false
positives.
obj_new_no_struct() and obj_new_acq() use the bpf_obj_new() macro and
discard the result. arena_spin_lock_slowpath() uses two macros that
produce values and ignores the results. Add (void) casts to explicitly
indicate that this is intentional and suppress the warning.
An alternative solution is to change the macros to not produce values.
This would work today for the arena_spin_lock_slowpath() issue, but in
the future there may appear users who need them. Another potential
solution is to replace these macros with functions. Unfortunately this
would not work, because these macros work with unknown types and
control flow.
[1] https://github.com/icecc/icecream
[2] https://github.com/llvm/llvm-project/issues/142614
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250829030017.102615-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Small cleanup and test extension to probe the bpf_crypto_{encrypt,decrypt}()
kfunc when a bad dst buffer is passed in to assert that an error is returned.
Also, encrypt_sanity() and skb_crypto_setup() were explicit to set the global
status variable to zero before any test, so do the same for decrypt_sanity().
Do not explicitly zero the on-stack err before bpf_crypto_ctx_create() given
the kfunc is expected to do it internally for the success case.
Before kernel fix:
# ./vmtest.sh -- ./test_progs -t crypto
[...]
[ 1.531200] bpf_testmod: loading out-of-tree module taints kernel.
[ 1.533388] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
#87/1 crypto_basic/crypto_release:OK
#87/2 crypto_basic/crypto_acquire:OK
#87 crypto_basic:OK
test_crypto_sanity:PASS:skel open 0 nsec
test_crypto_sanity:PASS:ip netns add crypto_sanity_ns 0 nsec
test_crypto_sanity:PASS:ip -net crypto_sanity_ns -6 addr add face::1/128 dev lo nodad 0 nsec
test_crypto_sanity:PASS:ip -net crypto_sanity_ns link set dev lo up 0 nsec
test_crypto_sanity:PASS:open_netns 0 nsec
test_crypto_sanity:PASS:AF_ALG init fail 0 nsec
test_crypto_sanity:PASS:if_nametoindex lo 0 nsec
test_crypto_sanity:PASS:skb_crypto_setup fd 0 nsec
test_crypto_sanity:PASS:skb_crypto_setup 0 nsec
test_crypto_sanity:PASS:skb_crypto_setup retval 0 nsec
test_crypto_sanity:PASS:skb_crypto_setup status 0 nsec
test_crypto_sanity:PASS:create qdisc hook 0 nsec
test_crypto_sanity:PASS:make_sockaddr 0 nsec
test_crypto_sanity:PASS:attach encrypt filter 0 nsec
test_crypto_sanity:PASS:encrypt socket 0 nsec
test_crypto_sanity:PASS:encrypt send 0 nsec
test_crypto_sanity:FAIL:encrypt status unexpected error: -5 (errno 95)
#88 crypto_sanity:FAIL
Summary: 1/2 PASSED, 0 SKIPPED, 1 FAILED
After kernel fix:
# ./vmtest.sh -- ./test_progs -t crypto
[...]
[ 1.540963] bpf_testmod: loading out-of-tree module taints kernel.
[ 1.542404] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
#87/1 crypto_basic/crypto_release:OK
#87/2 crypto_basic/crypto_acquire:OK
#87 crypto_basic:OK
#88 crypto_sanity:OK
Summary: 2/2 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/20250829143657.318524-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new script that wraps git to trawl the repository history for
renames of .rst files in the Documentation/ directory.
Example usage:
tools/docs/gen-renames.py --rev v6.17-rc3 > Documentation/.renames.txt
The output format is simply:
<old path> SPACE <new path> NEWLINE
where neither <old path> nor <new path> contain the Documentation/
prefix or the .rst suffix. The file is sorted alphabetically.
We can suggest rerunning the script for future renames (and squash the
resulting change) or rerun it periodically to keep the file up to date.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250905144608.577449-2-vegard.nossum@oracle.com>
The second title line which shows symbol and DSO name is broken after
moving to another function at 'callq' instruction.
The ui_browser__show_title() is used for the first line which shows
global sample count and event name so it doesn't change across the
functions.
What it needs after processing 'call' instruction is to update the
second line onlly. Add a comment and call appropriate function.
You can verify the change by pressing ENTER on a 'call' instruction and
then ESC.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The various sample types that are generated are based on the same SPE
sample, just placed into different sample type bins.
The same sample can be in multiple bins if it has flags set that cause
it to be.
Currently we're only applying the --itrace interval downsampling to the
instruction bin, which means that the sample would appear in one bin but
not another if it was skipped due to downsampling.
I don't thing anyone would want or expect this, so make this behave
consistently by applying the downsampling before generating any sample.
You might argue that the "instructions" interval type doesn't make sense
to apply to "memory" sample types because it would be skipping every n
memory samples, rather than every n instructions.
ut the downsampling was already not an instruction interval even for the
instruction samples. SPE has a hardware based sampling interval, and the
instruction interval was just a convenient way to specify further
downsampling.
This is hinted at in the warning message shown for intervals greater
than 1.
This makes SPE diverge from trace technologies like Intel PT and Arm
Coresight.
In those cases instruction samples can be reduced but all branches are
still emitted. This makes sense there, because branches form a complete
execution history, and asking to skip branches every n instructions
doesn't really make sense.
But for SPE, as mentioned above, downsampling the instruction samples
already wasn't consistent with trace technologies so we ended up with
some middle ground that had no benefit.
Now it's possible to reduce the volume of samples in all groups and
samples won't be missing from one group but present in another.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <Ben.Gainey@arm.com>
Cc: George Wort <George.Wort@arm.com>
Cc: Graham Woodward <Graham.Woodward@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Williams <Michael.Williams@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The loop in bench_sockmap_prog_destroy() has two issues:
1. Using 'sizeof(ctx.fds)' as the loop bound results in the number of
bytes, not the number of file descriptors, causing the loop to iterate
far more times than intended.
2. The condition 'ctx.fds[0] > 0' incorrectly checks only the first fd for
all iterations, potentially leaving file descriptors unclosed. Change
it to 'ctx.fds[i] > 0' to check each fd properly.
These fixes ensure correct cleanup of all file descriptors when the
benchmark exits.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250909124721.191555-1-jiayuan.chen@linux.dev
Closes: https://lore.kernel.org/bpf/aLqfWuRR9R_KTe5e@stanley.mountain/
I started seeing this in recent Fedora 42 kernels:
# uname -a
Linux number 6.16.3-200.fc42.x86_64 #1 SMP PREEMPT_DYNAMIC Sat Aug 23 17:02:17 UTC 2025 x86_64 GNU/Linux
#
# perf test vmlinux
1: vmlinux symtab matches kallsyms : FAILED!
#
Rust is enabled and these were the symbols causing the above failure,
i.e. found in vmlinux but not in /proc/kallsyms:
$ grep -w N /proc/kallsyms
0000000000000000 N __pfx__RNCINvNtNtNtCsbDUBuN8AbD4_4core4iter8adapters3map12map_try_foldjNtCs6vVzKs5jPr6_12drm_panic_qr7VersionuINtNtNtBa_3ops12control_flow11ControlFlowB10_ENcB10_0NCINvNvNtNtNtB8_6traits8iterator8Iterator4find5checkB10_NCNvMB12_B10_13from_segments0E0E0B12_
0000000000000000 N _RNCINvNtNtNtCsbDUBuN8AbD4_4core4iter8adapters3map12map_try_foldjNtCs6vVzKs5jPr6_12drm_panic_qr7VersionuINtNtNtBa_3ops12control_flow11ControlFlowB10_ENcB10_0NCINvNvNtNtNtB8_6traits8iterator8Iterator4find5checkB10_NCNvMB12_B10_13from_segments0E0E0B12_
$
So accept those 'N' symbols as well.
About them, from 'man nm':
"N" The symbol is a debugging symbol.
"n" The symbol is in a non-data, non-code, non-debug read-only section.
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building with CONFIG_CFI_CLANG=y after the recent series to
separate the x86 startup code, there are objtool warnings along the
lines of:
vmlinux.o: warning: objtool: __pi___cfi_startup_64_load_idt() falls through to next function __pi_startup_64_load_idt()
vmlinux.o: warning: objtool: __pi___cfi_startup_64_setup_gdt_idt() falls through to next function __pi_startup_64_setup_gdt_idt()
vmlinux.o: warning: objtool: __pi___cfi___startup_64() falls through to next function __pi___startup_64()
As the comment in validate_branch() states, this is expected, so ignore
these symbols in the same way that __cfi_ and __pfx_ symbols are already
ignored for the rest of the kernel.
Fixes: 7b38dec3c5 ("x86/boot: Create a confined code area for startup code")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Add selftest for the IPv6 fragmentation regression which affected
several stable kernels.
Commit a18dfa9925 ("ipv6: save dontfrag in cork") was backported to
stable without some prerequisite commits. This caused a regression when
sending IPv6 UDP packets by preventing fragmentation and instead
returning -1 (EMSGSIZE).
Add selftest to check for this issue by attempting to send a packet
larger than the interface MTU. The packet will be fragmented on a
working kernel, with sendmsg(2) correctly returning the expected number
of bytes sent. When the regression is present, sendmsg returns -1 and
sets errno to EMSGSIZE.
Link: https://lore.kernel.org/stable/aElivdUXqd1OqgMY@karahi.gladserv.com
Signed-off-by: Brett A C Sheffield <bacs@librecast.net>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250903154925.13481-1-bacs@librecast.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If AT_SYSINFO_EHDR is missing the whole test needs to be skipped.
Currently this results in the following output:
TAP version 13
1..16
# AT_SYSINFO_EHDR is not present!
This output is incorrect, as "1..16" still requires the subtest lines to
be printed, which isn't done however.
Switch to the correct skipping functions, so the output now correctly
indicates that no subtests are being run:
TAP version 13
1..0 # SKIP AT_SYSINFO_EHDR is not present!
Fixes: 693f5ca08c ("kselftest: Extend vDSO selftest")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-2-90f499dd35f8@linutronix.de
The _rval register variable is meant to be an output operand of the asm
statement but is instead used as input operand.
clang 20.1 notices this and triggers -Wuninitialized warnings:
tools/testing/selftests/timers/auxclock.c:154:10: error: variable '_rval' is uninitialized when used here [-Werror,-Wuninitialized]
154 | return VDSO_CALL(self->vdso_clock_gettime64, 2, clockid, ts);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/testing/selftests/timers/../vDSO/vdso_call.h:59:10: note: expanded from macro 'VDSO_CALL'
59 | : "r" (_rval) \
| ^~~~~
tools/testing/selftests/timers/auxclock.c:154:10: note: variable '_rval' is declared here
tools/testing/selftests/timers/../vDSO/vdso_call.h:47:2: note: expanded from macro 'VDSO_CALL'
47 | register long _rval asm ("r3"); \
| ^
It seems the list of input and output operands have been switched around.
However as the argument registers are not always initialized they can not
be marked as pure inputs as that would trigger -Wuninitialized warnings.
Adding _rval as another input and output operand does also not work as it
would collide with the existing _r3 variable.
Instead reuse _r3 for both the argument and the return value.
Fixes: 6eda706a53 ("selftests: vDSO: fix the way vDSO functions are called for powerpc")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-1-90f499dd35f8@linutronix.de
Closes: https://lore.kernel.org/oe-kbuild-all/202506180223.BOOk5jDK-lkp@intel.com/
Add comprehensive selftest to verify:
- Per-port actor priority setting via ad_actor_port_prio
- Aggregator selection behavior with port_priority ad_select policy
Also move cmd_jq helper from forwarding/lib.sh to net/lib.sh for
broader reusability across network selftests.
Here is the result output
# ./bond_lacp_prio.sh
TEST: bond 802.3ad (ad_actor_port_prio setting) [ OK ]
TEST: bond 802.3ad (ad_actor_port_prio select) [ OK ]
TEST: bond 802.3ad (ad_actor_port_prio switch) [ OK ]
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250902064501.360822-4-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
To pick the fixes sent by Namhyung for tools/perf for v6.17-rc5 and get
closer to the other tools code that is used by tools/perf.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 9bb88c6596 ("selftests: net: test extacks in netlink dumps")
moved netlink-dumps from TEST_GEN_PROGS to YNL_GEN_FILES.
But _FILES are not for tests, rather for utilities / helpers.
Create YNL_GEN_PROGS and include netlink-dumps there.
This makes netlink-dumps part of executed tests, again.
Link: https://patch.msgid.link/20250906211351.3192412-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recent changes to make netlink socket memory accounting must
have broken the implicit assumption of the netlink-dump test
that we can fit exactly 64 dumps into the socket. Handle the
failure mode properly, and increase the dump count to 80
to make sure we still run into the error condition if
the default buffer size increases in the future.
Link: https://patch.msgid.link/20250906211351.3192412-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The error message printed here only uses the previous err value,
which results in it being printed as 0.
When bpf_map__attach_struct_ops encounters an error,
it uses libbpf_err_ptr(err) to set errno = -err and returns NULL.
Therefore, Using -errno can fix this issue.
Fix before:
run_subtest:FAIL:1019 bpf_map__attach_struct_ops failed for map pro_epilogue: err=0
Fix after:
run_subtest:FAIL:1019 bpf_map__attach_struct_ops failed for map pro_epilogue: err=-9
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250908060810.1054341-1-yangfeng59949@163.com
Fix grammatical error in <past tense verb> + <infinitive>
construct related to memory allocation checks.
In essence change "Failed to allocated" to "Failed to allocate".
Signed-off-by: Nikola Z. Ivanov <zlatistiv@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
