To reduce the boilerplate code, refactor futex_wait_unitialized_heap
test to use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_wait_wouldblock test to
use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_wait_timeout test to use
kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_requeue_pi_signal_restart
test to use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_requeue_pi_mismatched_ops
test to use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_requeue_pi test to use
kselftest_harness header instead of futex's logging header.
Use kselftest fixture feature to make it easy to repeat the same test
with different parameters. With that, drop all repetitive test calls
from run.sh.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Create ksft_print_dbg_msg() so testers can enable extra debug messages
when running a test with the flag -d.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* kvm-arm64/el2-feature-control: (23 commits)
: .
: General rework of EL2 features that can be disabled to satisfy
: the requirement of migration between heterogeneous hosts:
:
: - Handle effective RES0 behaviour of undefined registers, making sure
: that disabling a feature affects full registeres, and not just
: individual control bits. (20250918151402.1665315-1-maz@kernel.org)
:
: - Allow ID_AA64MMFR1_EL1.{TWED,HCX} to be disabled from userspace.
: (20250911114621.3724469-1-yangjinqian1@huawei.com)
:
: - Turn the NV feature management into a deny-list, and expose
: missing features to EL2 guests.
: (20250912212258.407350-1-oliver.upton@linux.dev)
: .
KVM: arm64: nv: Expose up to FEAT_Debugv8p8 to NV-enabled VMs
KVM: arm64: nv: Advertise FEAT_TIDCP1 to NV-enabled VMs
KVM: arm64: nv: Advertise FEAT_SpecSEI to NV-enabled VMs
KVM: arm64: nv: Expose FEAT_TWED to NV-enabled VMs
KVM: arm64: nv: Exclude guest's TWED configuration when TWE isn't set
KVM: arm64: nv: Expose FEAT_AFP to NV-enabled VMs
KVM: arm64: nv: Expose FEAT_ECBHB to NV-enabled VMs
KVM: arm64: nv: Expose FEAT_RASv1p1 via RAS_frac
KVM: arm64: nv: Expose FEAT_DF2 to NV-enabled VMs
KVM: arm64: nv: Don't erroneously claim FEAT_DoubleLock for NV VMs
KVM: arm64: nv: Convert masks to denylists in limit_nv_id_reg()
KVM: arm64: selftests: Test writes to ID_AA64MMFR1_EL1.{HCX, TWED}
KVM: arm64: Make ID_AA64MMFR1_EL1.{HCX, TWED} writable from userspace
KVM: arm64: Convert MDCR_EL2 RES0 handling to compute_reg_res0_bits()
KVM: arm64: Convert SCTLR_EL1 RES0 handling to compute_reg_res0_bits()
KVM: arm64: Enforce absence of FEAT_TCR2 on TCR2_EL2
KVM: arm64: Enforce absence of FEAT_SCTLR2 on SCTLR2_EL{1,2}
KVM: arm64: Convert HCR_EL2 RES0 handling to compute_reg_res0_bits()
KVM: arm64: Enforce absence of FEAT_HCX on HCRX_EL2
KVM: arm64: Enforce absence of FEAT_FGT2 on FGT2 registers
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add a basic test corrupting a level-2 table entry to check that
the resulting abort is a SEA on a PTW at level-3.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Commit d5094bcb5b ("tools/nolibc: define time_t in terms of
__kernel_old_time_t") made nolibc use the kernel's time type so that
`time_t` matches `timespec::tv_sec` on all ABIs (notably x32).
But since __kernel_old_time_t is fairly new, notably from 2020 in commit
94c467ddb2 ("y2038: add __kernel_old_timespec and __kernel_old_time_t"),
nolibc builds that rely on host headers may fail.
Switch to __kernel_time_t, which is the same as __kernel_old_time_t and
has existed for longer.
Tested in PPC VM of Open Source Lab of Oregon State University
(./tools/testing/selftests/rcutorture/bin/mkinitrd.sh)
Fixes: d5094bcb5b ("tools/nolibc: define time_t in terms of __kernel_old_time_t")
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
[Thomas: Reformat commit and its message a bit]
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
ASoC: Updates for v6.18
A relatively quiet release for ASoC, we've had a lot of maintainance
work going on and several new drivers but really the most remarkable
thing is that we removed a driver, the WL1273 driver used in some old
Nokia systems that have had the underlying system support removed from
the kernel.
- Morimoto-san continues his work on cleanups of the core APIs and
enforcement of abstraction layers.
- Lots of cleanups and conversions of DT bindings.
- Substantial maintainance work on the Intel AVS drivers.
- Support for Qualcomm Glymur and PM4125, Realtek RT1321, Shanghai
FourSemi FS2104/5S, Texas Instruments PCM1754.
- Remove support for TI WL1273.
This fixes the build with -Werror -Wall.
btf_dumper.c:71:31: error: variable 'finfo' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
71 | info.func_info = ptr_to_u64(&finfo);
| ^~~~~
prog.c:2294:31: error: variable 'func_info' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
2294 | info.func_info = ptr_to_u64(&func_info);
|
v2:
- Initialize instead of using memset.
Signed-off-by: Tom Stellard <tstellar@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20250917183847.318163-1-tstellar@redhat.com
Commit bd7c231212 ("pinctrl: meson: Fix typo in device table macro")
is needed in kbuild-next to avoid a build error with a future change.
While at it, address the conflict between commit 41f9049cff ("riscv:
Only allow LTO with CMODEL_MEDANY") and commit 6578a1ff6a ("riscv:
Remove version check for LTO_CLANG selects"), as reported by Stephen
Rothwell [1].
Link: https://lore.kernel.org/20250908134913.68778b7b@canb.auug.org.au/ [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
The detection of uncore_imc may happen for free running PMUs and the
clockticks event may be present on uncore_clock. Rewrite the test to
detect duplicated/deduplicated events from perf list, not hardcoded to
uncore_imc.
If perf stat fails then assume it is permissions and skip the test.
Committer testing:
Before:
root@x1:~# perf test -vv uniquifyi
96: perf stat events uniquifying:
--- start ---
test child forked, pid 220851
stat event uniquifying test
grep: Unmatched [, [^, [:, [., or [=
Event is not uniquified [Failed]
perf stat -e clockticks -A -o /tmp/__perf_test.stat_output.X7ChD -- true
# started on Fri Sep 19 16:48:38 2025
Performance counter stats for 'system wide':
CPU0 2,310,956 uncore_clock/clockticks/
0.001746771 seconds time elapsed
---- end(-1) ----
96: perf stat events uniquifying : FAILED!
root@x1:~#
After:
root@x1:~# perf test -vv uniquifyi
96: perf stat events uniquifying:
--- start ---
test child forked, pid 222366
Uniquification of PMU sysfs events test
Testing event uncore_imc_free_running/data_read/ is uniquified to uncore_imc_free_running_0/data_read/
Testing event uncore_imc_free_running/data_total/ is uniquified to uncore_imc_free_running_0/data_total/
Testing event uncore_imc_free_running/data_write/ is uniquified to uncore_imc_free_running_0/data_write/
Testing event uncore_imc_free_running/data_read/ is uniquified to uncore_imc_free_running_1/data_read/
Testing event uncore_imc_free_running/data_total/ is uniquified to uncore_imc_free_running_1/data_total/
Testing event uncore_imc_free_running/data_write/ is uniquified to uncore_imc_free_running_1/data_write/
---- end(0) ----
96: perf stat events uniquifying : Ok
root@x1:~#
Fixes: 070b315333 ("perf test: Restrict uniquifying test to machines with 'uncore_imc'")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The PMU name is appearing twice in:
```
$ perf stat -e uncore_imc_free_running/data_total/ -A true
Performance counter stats for 'system wide':
CPU0 1.57 MiB uncore_imc_free_running_0/uncore_imc_free_running,data_total/
CPU0 1.58 MiB uncore_imc_free_running_1/uncore_imc_free_running,data_total/
0.000892376 seconds time elapsed
```
Use the pmu_name_len_no_suffix to avoid this problem.
Committer testing:
After this patch:
root@x1:~# perf stat -e uncore_imc_free_running/data_total/ -A true
Performance counter stats for 'system wide':
CPU0 1.69 MiB uncore_imc_free_running_0/data_total/
CPU0 1.68 MiB uncore_imc_free_running_1/data_total/
0.002141605 seconds time elapsed
root@x1:~#
Fixes: 7d45f402d3 ("perf evlist: Make uniquifying counter names consistent")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test starts a workload and then opens events. If the events fail
to open, for example because of perf_event_paranoid, the gopipe of the
workload is leaked and the file descriptor leak check fails when the
test exits. To avoid this cancel the workload when opening the events
fails.
Before:
```
$ perf test -vv 7
7: PERF_RECORD_* events & perf_sample fields:
--- start ---
test child forked, pid 1189568
Using CPUID GenuineIntel-6-B7-1
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/)
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8
sys_perf_event_open failed, error -13
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/)
disabled 1
exclude_kernel 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 3
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/)
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8
sys_perf_event_open failed, error -13
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/)
disabled 1
exclude_kernel 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 3
Attempt to add: software/cpu-clock/
..after resolving event: software/config=0/
cpu-clock -> software/cpu-clock/
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0x9 (PERF_COUNT_SW_DUMMY)
sample_type IP|TID|TIME|CPU
read_format ID|LOST
disabled 1
inherit 1
mmap 1
comm 1
enable_on_exec 1
task 1
sample_id_all 1
mmap2 1
comm_exec 1
ksymbol 1
bpf_event 1
{ wakeup_events, wakeup_watermark } 1
------------------------------------------------------------
sys_perf_event_open: pid 1189569 cpu 0 group_fd -1 flags 0x8
sys_perf_event_open failed, error -13
perf_evlist__open: Permission denied
---- end(-2) ----
Leak of file descriptor 6 that opened: 'pipe:[14200347]'
---- unexpected signal (6) ----
iFailed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
#0 0x565358f6666e in child_test_sig_handler builtin-test.c:311
#1 0x7f29ce849df0 in __restore_rt libc_sigaction.c:0
#2 0x7f29ce89e95c in __pthread_kill_implementation pthread_kill.c:44
#3 0x7f29ce849cc2 in raise raise.c:27
#4 0x7f29ce8324ac in abort abort.c:81
#5 0x565358f662d4 in check_leaks builtin-test.c:226
#6 0x565358f6682e in run_test_child builtin-test.c:344
#7 0x565358ef7121 in start_command run-command.c:128
#8 0x565358f67273 in start_test builtin-test.c:545
#9 0x565358f6771d in __cmd_test builtin-test.c:647
#10 0x565358f682bd in cmd_test builtin-test.c:849
#11 0x565358ee5ded in run_builtin perf.c:349
#12 0x565358ee6085 in handle_internal_command perf.c:401
#13 0x565358ee61de in run_argv perf.c:448
#14 0x565358ee6527 in main perf.c:555
#15 0x7f29ce833ca8 in __libc_start_call_main libc_start_call_main.h:74
#16 0x7f29ce833d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128
#17 0x565358e391c1 in _start perf[851c1]
7: PERF_RECORD_* events & perf_sample fields : FAILED!
```
After:
```
$ perf test 7
7: PERF_RECORD_* events & perf_sample fields : Skip (permissions)
```
Fixes: 16d00fee70 ("perf tests: Move test__PERF_RECORD into separate object")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If libperl is installed then the perf tool build will build against
it. There appears to be limited interest in the scripting support for
perl so let's make it opt-in and deprecate it.
With this patch applied you need to add LIBPERL=1 to get libperl
support in perf - there is no warning if libperl is missing, but
building will fail if libperl is missing and the build has LIBPERL=1.
The perf version output is changed to:
```
$ perf version --build-options
perf version 6.17.rc3.g8eca69269947
aio: [ on ] # HAVE_AIO_SUPPORT
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
bpf_skeletons: [ on ] # HAVE_BPF_SKEL
debuginfod: [ on ] # HAVE_DEBUGINFOD_SUPPORT
dwarf: [ on ] # HAVE_LIBDW_SUPPORT
dwarf_getlocations: [ on ] # HAVE_LIBDW_SUPPORT
dwarf-unwind: [ on ] # HAVE_DWARF_UNWIND_SUPPORT
auxtrace: [ on ] # HAVE_AUXTRACE_SUPPORT
libbfd: [ OFF ] # HAVE_LIBBFD_SUPPORT ( tip: Deprecated, license incompatibility, use BUILD_NONDISTRO=1 and install binutils-dev[el] )
libbpf-strings: [ on ] # HAVE_LIBBPF_STRINGS_SUPPORT
libcapstone: [ on ] # HAVE_LIBCAPSTONE_SUPPORT
libdw-dwarf-unwind: [ on ] # HAVE_LIBDW_SUPPORT
libelf: [ on ] # HAVE_LIBELF_SUPPORT
libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT
libopencsd: [ OFF ] # HAVE_CSTRACE_SUPPORT
libperl: [ OFF ] # HAVE_LIBPERL_SUPPORT ( tip:
Deprecated, use LIBPERL=1 and install libperl-dev to build with it )
libpfm4: [ on ] # HAVE_LIBPFM
libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT
libslang: [ on ] # HAVE_SLANG_SUPPORT
libtraceevent: [ on ] # HAVE_LIBTRACEEVENT
libunwind: [ OFF ] # HAVE_LIBUNWIND_SUPPORT ( tip:
Deprecated, use LIBUNWIND=1 and install libunwind-dev[el] to build
with it )
lzma: [ on ] # HAVE_LZMA_SUPPORT
numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT
zlib: [ on ] # HAVE_ZLIB_SUPPORT
zstd: [ on ] # HAVE_ZSTD_SUPPORT
```
i.e. there is a tip saying about deprecation and how to get support
back.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <qmo@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Yuzhuo Jing <yuzhuo@google.com>
Link: https://lore.kernel.org/lkml/aMrk03gigBlGcYLK@x1/
Link: https://lore.kernel.org/lkml/CAP-5=fVX+bLBRJCiziDi_hBySgv2NFtDoghtpheSSxVAvvETGw@mail.gmail.com
[ Keep the pre-existing perl-ExtUtils-Embed hint for Fedora/RHEL systems ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull LoongArch fixes from Huacai Chen:
"Fix some build warnings for RUST-enabled objtool check, align ACPI
structures for ARCH_STRICT_ALIGN, fix an unreliable stack for live
patching, add some NULL pointer checkings, and fix some bugs around
KVM"
* tag 'loongarch-fixes-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_pch_pic_regs_access()
LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_eiointc_sw_status_access()
LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_eiointc_regs_access()
LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_eiointc_ctrl_access()
LoongArch: KVM: Fix VM migration failure with PTW enabled
LoongArch: KVM: Remove unused returns and semicolons
LoongArch: vDSO: Check kcalloc() result in init_vdso()
LoongArch: Fix unreliable stack for live patching
LoongArch: Replace sprintf() with sysfs_emit()
LoongArch: Check the return value when creating kobj
LoongArch: Align ACPI structures if ARCH_STRICT_ALIGN enabled
LoongArch: Update help info of ARCH_STRICT_ALIGN
LoongArch: Handle jump tables options for RUST
LoongArch: Make LTO case independent in Makefile
objtool/LoongArch: Mark special atomic instruction as INSN_BUG type
objtool/LoongArch: Mark types based on break immediate code
When UBLK_F_BUF_REG_OFF_DAEMON was added, we missed updating kublk's
feat_map, which results in the feature being reported as "unknown." Add
UBLK_F_BUF_REG_OFF_DAEMON to feat_map to fix this.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Simplify the definition of feat_map by introducing a helper macro
FEAT_NAME to avoid having to type the feature name twice. As a side
effect, this changes the names in the feature list to be the full macro
name instead of the abbreviated names that were used before, but this is
a good change for clarity.
Using the full feature macro names ruins the alignment of the output, so
change the output format to put each feature's hex value before its
name, as this is easier to align nicely. The output now looks as
follows:
root# ./kublk features
ublk_drv features: 0x7fff
0x1 : UBLK_F_SUPPORT_ZERO_COPY
0x2 : UBLK_F_URING_CMD_COMP_IN_TASK
0x4 : UBLK_F_NEED_GET_DATA
0x8 : UBLK_F_USER_RECOVERY
0x10 : UBLK_F_USER_RECOVERY_REISSUE
0x20 : UBLK_F_UNPRIVILEGED_DEV
0x40 : UBLK_F_CMD_IOCTL_ENCODE
0x80 : UBLK_F_USER_COPY
0x100 : UBLK_F_ZONED
0x200 : UBLK_F_USER_RECOVERY_FAIL_IO
0x400 : UBLK_F_UPDATE_SIZE
0x800 : UBLK_F_AUTO_BUF_REG
0x1000 : UBLK_F_QUIESCE
0x2000 : UBLK_F_PER_IO_DAEMON
0x4000 : unknown
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- simple propagation of read/write marks;
- joining read/write marks from conditional branches;
- avoid must_write marks in when same instruction accesses different
stack offsets on different execution paths;
- avoid must_write marks in case same instruction accesses stack
and non-stack pointers on different execution paths;
- read/write marks propagation to outer stack frame;
- independent read marks for different callchains ending with the same
function;
- bpf_calls_callback() dependent logic in
liveness.c:bpf_stack_slot_alive().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250918-callchain-sensitive-liveness-v3-12-c3cd27bacc60@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds tags __not_msg(<msg>) and __not_msg_unpriv(<msg>).
Test fails if <msg> is found in verifier log.
If __msg_not() is situated between __msg() tags framework matches
__msg() tags first, and then checks that <msg> is not present in a
portion of a log between bracketing __msg() tags.
__msg_not() tags bracketed by a same __msg() group are effectively
unordered.
The idea is borrowed from LLVM's CheckFile with its CHECK-NOT syntax.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250918-callchain-sensitive-liveness-v3-11-c3cd27bacc60@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove register chain based liveness tracking:
- struct bpf_reg_state->{parent,live} fields are no longer needed;
- REG_LIVE_WRITTEN marks are superseded by bpf_mark_stack_write()
calls;
- mark_reg_read() calls are superseded by bpf_mark_stack_read();
- log.c:print_liveness() is superseded by logging in liveness.c;
- propagate_liveness() is superseded by bpf_update_live_stack();
- no need to establish register chains in is_state_visited() anymore;
- fix a bunch of tests expecting "_w" suffixes in verifier log
messages.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250918-callchain-sensitive-liveness-v3-9-c3cd27bacc60@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If a user specifies an AUX buffer larger than 2 GiB, the returned size
may exceed 0x80000000. Since the err variable is defined as a signed
32-bit integer, such a value overflows and becomes negative.
As a result, the perf record command reports an error:
0x146e8 [0x30]: failed to process type: 71 [Unknown error 183711232]
Change the type of the err variable to a signed 64-bit integer to
accommodate large buffer sizes correctly.
Fixes: d5652d865e ("perf session: Add ability to skip 4GiB or more")
Reported-by: Tamas Zsoldos <tamas.zsoldos@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250808-perf_fix_big_buffer_size-v1-1-45f45444a9a4@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There can be a significant gap in memset/memcpy performance depending
on the size of the region being operated on.
With chunk-size=4kb:
$ echo madvise > /sys/kernel/mm/transparent_hugepage/enabled
$ perf bench mem memset -p 4kb -k 4kb -s 4gb -l 10 -f x86-64-stosq
# Running 'mem/memset' benchmark:
# function 'x86-64-stosq' (movsq-based memset() in arch/x86/lib/memset_64.S)
# Copying 4gb bytes ...
13.011655 GB/sec
With chunk-size=1gb:
$ echo madvise > /sys/kernel/mm/transparent_hugepage/enabled
$ perf bench mem memset -p 4kb -k 1gb -s 4gb -l 10 -f x86-64-stosq
# Running 'mem/memset' benchmark:
# function 'x86-64-stosq' (movsq-based memset() in arch/x86/lib/memset_64.S)
# Copying 4gb bytes ...
21.936355 GB/sec
So, allow the user to specify the chunk-size.
The default value is identical to the total size of the region, which
preserves current behaviour.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Page sizes that can be selected: 4KB, 2MB, 1GB.
Both the reservation and node from which hugepages are allocated
from are expected to be addressed by the user.
An example of page-size selection:
$ perf bench mem memset -s 4gb -p 2mb
# Running 'mem/memset' benchmark:
# function 'default' (Default memset() provided by glibc)
# Copying 4gb bytes ...
14.919194 GB/sec
# function 'x86-64-unrolled' (unrolled memset() in arch/x86/lib/memset_64.S)
# Copying 4gb bytes ...
11.514503 GB/sec
# function 'x86-64-stosq' (movsq-based memset() in arch/x86/lib/memset_64.S)
# Copying 4gb bytes ...
12.600568 GB/sec
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When not running as root and with higher perf event paranoia values
the perf record LBR tests could fail rather than skipping the
problematic tests.
Add the sensitivity to the test and confirm it passes with paranoia
values from -1 to 2.
Committer testing:
Testing with '$ perf test -vv lbr', i.e. as non root, and then comparing
the output shows the mentioned errors before this patch:
acme@x1:~$ grep -m1 "model name" /proc/cpuinfo
model name : 13th Gen Intel(R) Core(TM) i7-1365U
acme@x1:~$
Before:
132: perf record LBR tests : Skip
After:
132: perf record LBR tests : Ok
Fixes: 32559b99e0 ("perf test: Add set of perf record LBR tests")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf record testcase fails on systems with more than 1K CPUs.
Testcase: perf test -vv "PERF_RECORD_* events & perf_sample fields"
PERF_RECORD_* events & perf_sample fields :
--- start ---
test child forked, pid 272482
sched_getaffinity: Invalid argument
sched__get_first_possible_cpu: Invalid argument
test child finished with -1
---- end ----
PERF_RECORD_* events & perf_sample fields: FAILED!
sched__get_first_possible_cpu uses "sched_getaffinity" to get the
cpumask and this call is returning EINVAL (Invalid argument).
This happens because the default mask size in glibc is 1024.
To overcome this 1024 CPUs mask size limitation of cpu_set_t, change the
mask size using the CPU_*_S macros ie, use CPU_ALLOC to allocate
cpumask, CPU_ALLOC_SIZE for size.
Same fix needed for mask which is used to setaffinity so that mask size
is large enough to represent number of possible CPU's in the system.
Reported-by: Tejas Manhas <tejas05@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Tested-by: Tejas Manhas <tejas05@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Aditya Bodkhe <Aditya.Bodkhe1@ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Utilizes the previous is_breg_access_indirect function to determine if
the register + offset stores the variable itself or the struct it points
to, save the information in die_var_type.is_reg_var_addr.
Since we are storing the real types in the stack state, we need to do a
type dereference when is_reg_var_addr is set to false for stack/frame
registers.
For other gp registers, skip the variable when the register is a pointer
to the type. If we want to accept these variables, we might also utilize
is_reg_var_addr in a different way, we need to mark that register as a
pointer to the type.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Zecheng Li <zecheng@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xu Liu <xliuprof@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduces the function is_breg_access_indirect to determine whether a
memory access involving a DW_OP_breg* operation refers to the variable's
value directly or requires dereferencing the variable's type as a
pointer based on the DWARF expression.
Previously, all breg based accesses were assumed to directly access the
variable's value (is_pointer = false).
The is_breg_access_indirect function handles three cases:
1. Base register + offset only: (e.g., DW_OP_breg7 RSP+88) The
calculated address is the location of the variable. The access is
direct, so no type dereference is needed. Returns false.
2. Base register + offset, followed by other operations ending in
DW_OP_stack_value, including DW_OP_deref: (e.g., DW_OP_breg*,
DW_OP_deref, DW_OP_stack_value) The DWARF expression computes the
variable's value, but that value requires a dereference. The memory
access is fetching that value, so no type dereference is needed.
Returns false.
3. Base register + offset, followed only by DW_OP_stack_value: (e.g.,
DW_OP_breg13 R13+256, DW_OP_stack_value) This indicates the value at
the base + offset is the variable's value. Since this value is being
used as an address in the memory access, the variable's type is
treated as a pointer and requires a type dereference. Returns true.
The is_pointer argument passed to match_var_offset is now set by
is_breg_access_indirect for breg accesses.
There are more complex expressions that includes multiple operations and
may require additional handling, such as DW_OP_deref without a
DW_OP_stack_value, or including multiple base registers. They are less
common in the Linux kernel dwarf and are skipped in check_allowed_ops.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Zecheng Li <zecheng@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xu Liu <xliuprof@google.com>
Link: https://lore.kernel.org/r/CAJUgMyK2wTiEZB__dtgCELmaNGFWhG1j0g9rv_C=cLD6Zq4_5w@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
