Only RX side for now and small message to test the setup.
In the future, we can extend it to TX side and to testing
both sides with a couple of megs of data.
make \
-C tools/testing/selftests \
TARGETS="drivers/hw/net" \
install INSTALL_PATH=~/tmp/ksft
scp ~/tmp/ksft ${HOST}:
scp ~/tmp/ksft ${PEER}:
cfg+="NETIF=${DEV}\n"
cfg+="LOCAL_V6=${HOST_IP}\n"
cfg+="REMOTE_V6=${PEER_IP}\n"
cfg+="REMOTE_TYPE=ssh\n"
cfg+="REMOTE_ARGS=root@${PEER}\n"
echo -e "$cfg" | ssh root@${HOST} "cat > ksft/drivers/net/net.config"
ssh root@${HOST} "cd ksft && ./run_kselftest.sh -t drivers/net:devmem.py"
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241107181211.3934153-13-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the next patch the hard-coded queue numbers are gonna be removed.
So introduce some initial support for ethtool YNL and use
it to enable header split.
Also, tcp-data-split requires latest ethtool which is unlikely
to be present in the distros right now.
(ideally, we should not shell out to ethtool at all).
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241107181211.3934153-9-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Soft lockups have been observed on a cluster of Linux-based edge routers
located in a highly dynamic environment. Using the `bird` service, these
routers continuously update BGP-advertised routes due to frequently
changing nexthop destinations, while also managing significant IPv6
traffic. The lockups occur during the traversal of the multipath
circular linked-list in the `fib6_select_path` function, particularly
while iterating through the siblings in the list. The issue typically
arises when the nodes of the linked list are unexpectedly deleted
concurrently on a different core—indicated by their 'next' and
'previous' elements pointing back to the node itself and their reference
count dropping to zero. This results in an infinite loop, leading to a
soft lockup that triggers a system panic via the watchdog timer.
Apply RCU primitives in the problematic code sections to resolve the
issue. Where necessary, update the references to fib6_siblings to
annotate or use the RCU APIs.
Include a test script that reproduces the issue. The script
periodically updates the routing table while generating a heavy load
of outgoing IPv6 traffic through multiple iperf3 clients. It
consistently induces infinite soft lockups within a couple of minutes.
Kernel log:
0 [ffffbd13003e8d30] machine_kexec at ffffffff8ceaf3eb
1 [ffffbd13003e8d90] __crash_kexec at ffffffff8d0120e3
2 [ffffbd13003e8e58] panic at ffffffff8cef65d4
3 [ffffbd13003e8ed8] watchdog_timer_fn at ffffffff8d05cb03
4 [ffffbd13003e8f08] __hrtimer_run_queues at ffffffff8cfec62f
5 [ffffbd13003e8f70] hrtimer_interrupt at ffffffff8cfed756
6 [ffffbd13003e8fd0] __sysvec_apic_timer_interrupt at ffffffff8cea01af
7 [ffffbd13003e8ff0] sysvec_apic_timer_interrupt at ffffffff8df1b83d
-- <IRQ stack> --
8 [ffffbd13003d3708] asm_sysvec_apic_timer_interrupt at ffffffff8e000ecb
[exception RIP: fib6_select_path+299]
RIP: ffffffff8ddafe7b RSP: ffffbd13003d37b8 RFLAGS: 00000287
RAX: ffff975850b43600 RBX: ffff975850b40200 RCX: 0000000000000000
RDX: 000000003fffffff RSI: 0000000051d383e4 RDI: ffff975850b43618
RBP: ffffbd13003d3800 R8: 0000000000000000 R9: ffff975850b40200
R10: 0000000000000000 R11: 0000000000000000 R12: ffffbd13003d3830
R13: ffff975850b436a8 R14: ffff975850b43600 R15: 0000000000000007
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
9 [ffffbd13003d3808] ip6_pol_route at ffffffff8ddb030c
10 [ffffbd13003d3888] ip6_pol_route_input at ffffffff8ddb068c
11 [ffffbd13003d3898] fib6_rule_lookup at ffffffff8ddf02b5
12 [ffffbd13003d3928] ip6_route_input at ffffffff8ddb0f47
13 [ffffbd13003d3a18] ip6_rcv_finish_core.constprop.0 at ffffffff8dd950d0
14 [ffffbd13003d3a30] ip6_list_rcv_finish.constprop.0 at ffffffff8dd96274
15 [ffffbd13003d3a98] ip6_sublist_rcv at ffffffff8dd96474
16 [ffffbd13003d3af8] ipv6_list_rcv at ffffffff8dd96615
17 [ffffbd13003d3b60] __netif_receive_skb_list_core at ffffffff8dc16fec
18 [ffffbd13003d3be0] netif_receive_skb_list_internal at ffffffff8dc176b3
19 [ffffbd13003d3c50] napi_gro_receive at ffffffff8dc565b9
20 [ffffbd13003d3c80] ice_receive_skb at ffffffffc087e4f5 [ice]
21 [ffffbd13003d3c90] ice_clean_rx_irq at ffffffffc0881b80 [ice]
22 [ffffbd13003d3d20] ice_napi_poll at ffffffffc088232f [ice]
23 [ffffbd13003d3d80] __napi_poll at ffffffff8dc18000
24 [ffffbd13003d3db8] net_rx_action at ffffffff8dc18581
25 [ffffbd13003d3e40] __do_softirq at ffffffff8df352e9
26 [ffffbd13003d3eb0] run_ksoftirqd at ffffffff8ceffe47
27 [ffffbd13003d3ec0] smpboot_thread_fn at ffffffff8cf36a30
28 [ffffbd13003d3ee8] kthread at ffffffff8cf2b39f
29 [ffffbd13003d3f28] ret_from_fork at ffffffff8ce5fa64
30 [ffffbd13003d3f50] ret_from_fork_asm at ffffffff8ce03cbb
Fixes: 66f5d6ce53 ("ipv6: replace rwlock with rcu and spinlock in fib6_table")
Reported-by: Adrian Oliver <kernel@aoliver.ca>
Signed-off-by: Omid Ehtemam-Haghighi <omid.ehtemamhaghighi@menlosecurity.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241106010236.1239299-1-omid.ehtemamhaghighi@menlosecurity.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 49f59573e9 ("selftests/mm: Enable pkey_sighandler_tests
on arm64"), pkey_sighandler_tests.c (which includes pkey-arm64.h via
pkey-helpers.h) ends up compiled for arm64. Since it doesn't use
aarch64_write_signal_pkey(), the compiler warns:
In file included from pkey-helpers.h:106,
from pkey_sighandler_tests.c:31:
pkey-arm64.h:130:13: warning: ‘aarch64_write_signal_pkey’ defined but not used [-Wunused-function]
130 | static void aarch64_write_signal_pkey(ucontext_t *uctxt, u64 pkey)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Make the aarch64_write_signal_pkey() a 'static inline void' function to
avoid the compiler warning.
Fixes: f5b5ea51f7 ("selftests: mm: make protection_keys test work on arm64")
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Link: https://lore.kernel.org/r/20241108110549.1185923-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
While some assemblers (including the LLVM assembler I mostly use) will
happily accept SMSTART as an instruction by default others, specifically
gas, require that any architecture extensions be explicitly enabled.
The assembler SME test programs use manually encoded helpers for the new
instructions but no SMSTART helper is defined, only SM and ZA specific
variants. Unfortunately the irritators that were just added use plain
SMSTART so on stricter assemblers these fail to build:
za-test.S:160: Error: selected processor does not support `smstart'
Switch to using SMSTART ZA via the manually encoded smstart_za macro we
already have defined.
Fixes: d65f27d240 ("kselftest/arm64: Implement irritators for ZA and ZT")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241108-arm64-selftest-asm-error-v1-1-7ce27b42a677@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* kvm-arm64/mmio-sea:
: Fix for SEA injection in response to MMIO
:
: Fix + test coverage for SEA injection in response to an unhandled MMIO
: exit to userspace. Naturally, if userspace decides to abort an MMIO
: instruction KVM shouldn't continue with instruction emulation...
KVM: arm64: selftests: Add tests for MMIO external abort injection
KVM: arm64: selftests: Convert to kernel's ESR terminology
tools: arm64: Grab a copy of esr.h from kernel
KVM: arm64: Don't retire aborted MMIO instruction
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/misc:
: Miscellaneous updates
:
: - Drop useless check against vgic state in ICC_CLTR_EL1.SEIS read
: emulation
:
: - Fix trap configuration for pKVM
:
: - Close the door on initialization bugs surrounding userspace irqchip
: static key by removing it.
KVM: selftests: Don't bother deleting memslots in KVM when freeing VMs
KVM: arm64: Get rid of userspace_irqchip_in_use
KVM: arm64: Initialize trap register values in hyp in pKVM
KVM: arm64: Initialize the hypervisor's VM state at EL2
KVM: arm64: Refactor kvm_vcpu_enable_ptrauth() for hyp use
KVM: arm64: Move pkvm_vcpu_init_traps() to init_pkvm_hyp_vcpu()
KVM: arm64: Don't map 'kvm_vgic_global_state' at EL2 with pKVM
KVM: arm64: Just advertise SEIS as 0 when emulating ICC_CTLR_EL1
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
When freeing a VM, don't call into KVM to manually remove each memslot,
simply cleanup and free any userspace assets associated with the memory
region. KVM is ultimately responsible for ensuring kernel resources are
freed when the VM is destroyed, deleting memslots one-by-one is
unnecessarily slow, and unless a test is already leaking the VM fd, the
VM will be destroyed when kvm_vm_release() is called.
Not deleting KVM's memslot also allows cleaning up dead VMs without having
to care whether or not the to-be-freed VM is dead or alive.
Reported-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/kvmarm/Zy0bcM0m-N18gAZz@google.com/
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/mpam-ni:
: Hiding FEAT_MPAM from KVM guests, courtesy of James Morse + Joey Gouly
:
: Fix a longstanding bug where FEAT_MPAM was accidentally exposed to KVM
: guests + the EL2 trap configuration was not explicitly configured. As
: part of this, bring in skeletal support for initialising the MPAM CPU
: context so KVM can actually set traps for its guests.
:
: Be warned -- if this series leads to boot failures on your system,
: you're running on turd firmware.
:
: As an added bonus (that builds upon the infrastructure added by the MPAM
: series), allow userspace to configure CTR_EL0.L1Ip, courtesy of Shameer
: Kolothum.
KVM: arm64: Make L1Ip feature in CTR_EL0 writable from userspace
KVM: arm64: selftests: Test ID_AA64PFR0.MPAM isn't completely ignored
KVM: arm64: Disable MPAM visibility by default and ignore VMM writes
KVM: arm64: Add a macro for creating filtered sys_reg_descs entries
KVM: arm64: Fix missing traps of guest accesses to the MPAM registers
arm64: cpufeature: discover CPU support for MPAM
arm64: head.S: Initialise MPAM EL2 registers and disable traps
arm64/sysreg: Convert existing MPAM sysregs and add the remaining entries
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/psci-1.3:
: PSCI v1.3 support, courtesy of David Woodhouse
:
: Bump KVM's PSCI implementation up to v1.3, with the added bonus of
: implementing the SYSTEM_OFF2 call. Like other system-scoped PSCI calls,
: this gets relayed to userspace for further processing with a new
: KVM_SYSTEM_EVENT_SHUTDOWN flag.
:
: As an added bonus, implement client-side support for hibernation with
: the SYSTEM_OFF2 call.
arm64: Use SYSTEM_OFF2 PSCI call to power off for hibernate
KVM: arm64: nvhe: Pass through PSCI v1.3 SYSTEM_OFF2 call
KVM: selftests: Add test for PSCI SYSTEM_OFF2
KVM: arm64: Add support for PSCI v1.2 and v1.3
KVM: arm64: Add PSCI v1.3 SYSTEM_OFF2 function for hibernation
firmware/psci: Add definitions for PSCI v1.3 specification
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Logic to prevent callbacks from acquiring new references for the program
(i.e. leaving acquired references), and releasing caller references
(i.e. those acquired in parent frames) was introduced in commit
9d9d00ac29 ("bpf: Fix reference state management for synchronous callbacks").
This was necessary because back then, the verifier simulated each
callback once (that could potentially be executed N times, where N can
be zero). This meant that callbacks that left lingering resources or
cleared caller resources could do it more than once, operating on
undefined state or leaking memory.
With the fixes to callback verification in commit
ab5cfac139 ("bpf: verify callbacks as if they are called unknown number of times"),
all of this extra logic is no longer necessary. Hence, drop it as part
of this commit.
Cc: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241109231430.2475236-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The timer_lockup test needs 2 CPUs to work, on single-CPU nodes it fails
to set thread affinity to CPU 1 since it doesn't exist:
# ./test_progs -t timer_lockup
test_timer_lockup:PASS:timer_lockup__open_and_load 0 nsec
test_timer_lockup:PASS:pthread_create thread1 0 nsec
test_timer_lockup:PASS:pthread_create thread2 0 nsec
timer_lockup_thread:PASS:cpu affinity 0 nsec
timer_lockup_thread:FAIL:cpu affinity unexpected error: 22 (errno 0)
test_timer_lockup:PASS: 0 nsec
#406 timer_lockup:FAIL
Skip the test if only 1 CPU is available.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Fixes: 50bd5a0c65 ("selftests/bpf: Add timer lockup selftest")
Tested-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241107115231.75200-1-vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Add test cases to verify the following four update operations on htab of
maps don't trigger lockdep warning:
(1) add then delete
(2) add, overwrite, then delete
(3) add, then lookup_and_delete
(4) add two elements, then lookup_and_delete_batch
Test cases are added for pre-allocated and non-preallocated htab of maps
respectively.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241106063542.357743-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
With recent uprobe fix [1] the sync time after unregistering uprobe is
much longer and prolongs the consumer test which creates and destroys
hundreds of uprobes.
This change adds 16 threads (which fits the test logic) and speeds up
the test.
Before the change:
# perf stat --null ./test_progs -t uprobe_multi_test/consumers
#421/9 uprobe_multi_test/consumers:OK
#421 uprobe_multi_test:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Performance counter stats for './test_progs -t uprobe_multi_test/consumers':
28.818778973 seconds time elapsed
0.745518000 seconds user
0.919186000 seconds sys
After the change:
# perf stat --null ./test_progs -t uprobe_multi_test/consumers 2>&1
#421/9 uprobe_multi_test/consumers:OK
#421 uprobe_multi_test:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Performance counter stats for './test_progs -t uprobe_multi_test/consumers':
3.504790814 seconds time elapsed
0.012141000 seconds user
0.751760000 seconds sys
[1] commit 87195a1ee3 ("uprobes: switch to RCU Tasks Trace flavor for better performance")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-14-jolsa@kernel.org
Adding uprobe session consumers to the consumer test,
so we get the session into the test mix.
In addition scaling down the test to have just 1 uprobe
and 1 uretprobe, otherwise the test time grows and is
unsuitable for CI even with threads.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-13-jolsa@kernel.org
The new uprobe changes bring some new behaviour that we need to reflect
in the consumer test. Now pending uprobe instance in the kernel can
survive longer and thus might call uretprobe consumer callbacks in
some situations in which, previously, such callback would be omitted.
We now need to take that into account in uprobe-multi consumer tests.
The idea being that uretprobe under test either stayed from before to
after (uret_stays + test_bit) or uretprobe instance survived and we
have uretprobe active in after (uret_survives + test_bit).
uret_survives just states that uretprobe survives if there are *any*
uretprobes both before and after (overlapping or not, doesn't matter)
and uprobe was attached before.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241107094337.3848210-1-jolsa@kernel.org
In order to specify extra compilation or linking flags to BPF selftests,
it is possible to set EXTRA_CFLAGS and EXTRA_LDFLAGS from the command
line. The problem is that they are not propagated to sub-make calls
(runqslower, bpftool, libbpf) and in the better case are not applied, in
the worse case cause the entire build fail.
Propagate EXTRA_CFLAGS and EXTRA_LDFLAGS to the sub-makes.
This, for instance, allows to build selftests as PIE with
$ make EXTRA_CFLAGS='-fPIE' EXTRA_LDFLAGS='-pie'
Without this change, the command would fail because libbpf.a would not
be built with -fPIE and other PIE binaries would not link against it.
The only problem is that we have to explicitly provide empty
EXTRA_CFLAGS='' and EXTRA_LDFLAGS='' to the builds of kernel modules as
we don't want to build modules with flags used for userspace (the above
example would fail as kernel doesn't support PIE).
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Alexandre Ghiti <alexghiti@rivosinc.com> says:
This implements [cmp]xchgXX() macros using Zacas and Zabha extensions
and finally uses those newly introduced macros to add support for
qspinlocks: note that this implementation of qspinlocks satisfies the
forward progress guarantee.
It also uses Ziccrse to provide the qspinlock implementation.
Thanks to Guo and Leonardo for their work!
* b4-shazam-merge: (1314 commits)
riscv: Add qspinlock support
dt-bindings: riscv: Add Ziccrse ISA extension description
riscv: Add ISA extension parsing for Ziccrse
asm-generic: ticket-lock: Add separate ticket-lock.h
asm-generic: ticket-lock: Reuse arch_spinlock_t of qspinlock
riscv: Implement xchg8/16() using Zabha
riscv: Implement arch_cmpxchg128() using Zacas
riscv: Improve zacas fully-ordered cmpxchg()
riscv: Implement cmpxchg8/16() using Zabha
dt-bindings: riscv: Add Zabha ISA extension description
riscv: Implement cmpxchg32/64() using Zacas
riscv: Do not fail to build on byte/halfword operations with Zawrs
riscv: Move cpufeature.h macros into their own header
Link: https://lore.kernel.org/r/20241103145153.105097-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Check if the PFCR query reported in userspace coincides with the
kernel reported function list. Right now we don't mask the functions
in the kernel so they have to be the same.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Hariharan Mari <hari55@linux.ibm.com>
Link: https://lore.kernel.org/r/20241107152319.77816-5-brueckner@linux.ibm.com
[frankja@linux.ibm.com: Added commit description]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20241107152319.77816-5-brueckner@linux.ibm.com>
