Coverity is unhappy because we may leak old_radio_rts_threshold. Since
this pointer is only valid in the context of the function and kfree is
NULL pointer safe, don't check and just call kfree.
Note that somehow, we were checking old_rts_threshold to free
old_radio_rts_threshold which is a bit odd.
Fixes: 264637941c ("wifi: cfg80211: Add Support to Set RTS Threshold for each Radio")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20251020075745.44168-1-emmanuel.grumbach@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
These were used by S1G for older chandef representation, but
are no longer needed. Clean them up, even if we can't drop
them from the userspace API entirely.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the S1G channelisation implementation differs from that of
VHT, which is the PHY that S1G is based on. The major difference between
the clock rate is 1/10th of VHT. However how their channelisation is
represented within cfg80211 and mac80211 vastly differ.
To rectify this, remove the use of IEEE80211_CHAN_1/2/4.. flags that were
previously used to indicate the control channel width, however it should be
implied that the control channels are 1MHz in the case of S1G. Additionally,
introduce the invert - being IEEE80211_CHAN_NO_4/8/16MHz - that imply
the control channel may not be used for a certain bandwidth. With these
new flags, we can perform regulatory and chandef validation just as we would
for VHT.
To deal with the notion that S1G PHYs may contain a 2MHz primary channel,
introduce a new variable, s1g_primary_2mhz, which indicates whether we are
operating on a 2MHz primary channel. In this case, the chandef::chan points to
the 1MHz primary channel pointed to by the primary channel location. Alongside
this, introduce some new helper routines that can extract the sibling 1MHz
channel. The sibling being the alternate 1MHz primary subchannel within the
2MHz primary channel that is not pointed to by chandef::chan.
Furthermore, due to unique restrictions imposed on S1G PHYs, introduce
a new flag, IEEE80211_CHAN_S1G_NO_PRIMARY, which states that the 1MHz channel
cannot be used as a primary channel. This is assumed to be set by vendors
as it is hardware and regdom specific, When we validate a 2MHz primary channel,
we need to ensure both 1MHz subchannels do not contain this flag. If one or
both of the 1MHz subchannels contain this flag then the 2MHz primary is not
permitted for use as a primary channel.
Properly integrate S1G channel validation such that it is implemented
according with other PHY types such as VHT. Additionally, implement a new
S1G-specific regulatory flag to allow cfg80211 to understand specific
vendor requirements for S1G PHYs.
Signed-off-by: Arien Judge <arien.judge@morsemicro.com>
Signed-off-by: Andrew Pope <andrew.pope@morsemicro.com>
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250918051913.500781-2-lachlan.hodges@morsemicro.com
[remove redundant NL80211_ATTR_S1G_PRIMARY_2MHZ check]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for sending and receiving action frames over a NAN Device
interface:
- For Synchronized NAN operation NAN Service Discovery
Frames (SDFs) and NAN Action Frames (NAFs) transmissions
over a NAN Device interface, a channel parameter is not
mandatory as the frame can be transmitted based on the NAN
Device schedule.
- For Unsynchronized NAN Discovery (USD) operation the
SDFs and NAFs could be transmitted using NL80211_CMD_FRAME
where a specific channel and dwell time are configured.
As Synchronized NAN Operation and USD can be done concurrently,
both modes need to be supported. Thus, allow sending NAN action
frames when user space handles the NAN Discovery Engine (DE) with
and without providing a channel as a parameter.
To support reception of NAN Action frames and Authentication
frames (used for NAN paring and verification) allow to
register for management frame reception of NAN Device interface
when user space handles the NAN DE.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250908140015.71da2b062929.I0166d51dcf14393f628cd5da366c21114f518618@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This notification will be used by the device to inform user space
about upcoming DW. When received, user space will be able to prepare
multicast Service Discovery Frames (SDFs) to be transmitted during the
next DW using %NL80211_CMD_FRAME command on the NAN management interface.
The device/driver will take care to transmit the frames in the correct
timing. This allows to implement a synchronized Discovery Engine (DE)
in user space, if the device doesn't support DE offload.
Note that this notification can be sent before the actual DW starts as
long as the driver/device handles the actual timing of the SDF
transmission.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250908140015.0e1d15031bab.I5b1721e61b63910452b3c5cdcdc1e94cb094d4c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg says:
====================
Plenty of things going on, notably:
- iwlwifi: major cleanups/rework
- brcmfmac: gets AP isolation support
- mac80211: gets more S1G support
* tag 'wireless-next-2025-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (94 commits)
wifi: mwifiex: fix endianness handling in mwifiex_send_rgpower_table
wifi: cfg80211: Remove the redundant wiphy_dev
wifi: mac80211: fix incorrect comment
wifi: cfg80211: update the time stamps in hidden ssid
wifi: mac80211: Fix HE capabilities element check
wifi: mac80211: add tx_handlers_drop statistics to ethtool
wifi: mac80211: fix reporting of all valid links in sta_set_sinfo()
wifi: iwlwifi: mld: CHANNEL_SURVEY_NOTIF is always supported
wifi: iwlwifi: mld: remove support of iwl_esr_mode_notif version 1
wifi: iwlwifi: mld: remove support from of sta cmd version 1
wifi: iwlwifi: mld: remove support of roc cmd version 5
wifi: iwlwifi: mld: remove support of mac cmd ver 2
wifi: iwlwifi: mld: don't consider phy cmd version 5
wifi: iwlwifi: implement wowlan status notification API update
wifi: iwlwifi: fw: Add ASUS to PPAG and TAS list
wifi: iwlwifi: add kunit tests for nvm parse
wifi: iwlwifi: api: add a flag to iwl_link_ctx_modify_flags
wifi: iwlwifi: pcie: move ltr_enabled to the specific transport
wifi: iwlwifi: pcie: move pm_support to the specific transport
wifi: iwlwifi: rename iwl_finish_nic_init
...
====================
Link: https://patch.msgid.link/20250911100854.20445-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 8cc71fc3b8 ("wifi: cfg80211: Fix "no buffer
space available" error in nl80211_get_station() for MLO"),
the per-link data is only included in station dumps, where
the size limit is somewhat less of an issue. However, it's
still an issue, depending on how many links a station has
and how much per-link data there is. Thus, for now, disable
per-link statistics entirely.
A complete fix will need to take this into account, make it
opt-in by userspace, and change the dump format to be able
to split a single station's data across multiple netlink
dump messages, which all together is too much development
for a fix.
Fixes: 82d7f841d9 ("wifi: cfg80211: extend to embed link level statistics in NL message")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, nl80211_get_station() allocates a fixed buffer size using
NLMSG_DEFAULT_SIZE. In multi-link scenarios - particularly when the
number of links exceeds two - this buffer size is often insufficient
to accommodate complete station statistics, resulting in "no buffer
space available" errors.
To address this, modify nl80211_get_station() to return only
accumulated station statistics and exclude per link stats.
Pass a new flag (link_stats) to nl80211_send_station() to control
the inclusion of per link statistics. This allows retaining
detailed output with per link data in dump commands, while
excluding it from other commands where it is not needed.
This change modifies the handling of per link stats introduced in
commit 82d7f841d9 ("wifi: cfg80211: extend to embed link level
statistics in NL message") to enable them only for
nl80211_dump_station().
Apply the same fix to cfg80211_del_sta_sinfo() by skipping per link
stats to avoid buffer issues. cfg80211_new_sta() doesn't include
stats and is therefore not impacted.
Fixes: 82d7f841d9 ("wifi: cfg80211: extend to embed link level statistics in NL message")
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20250905124800.1448493-1-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The so-called fullmac devices rely on firmware functionality and/or API to
change BSS parameters. Today there are limited drivers supporting the
nl80211 primitive, but they only handle a subset of the bss parameters
passed if any. The mac80211 driver does handle all parameters and stores
their configured values. Some of the BSS parameters were already conditional
by wiphy->features. For these the wiphy->bss_param_support and wiphy->features
fields are silently aligned in wiphy_register(). Maybe better to issue a warning
instead when they are misaligned.
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250817190435.1495094-2-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The processing of the struct cfg80211_sar_specs::sub_specs flexible
array requires its counter, num_sub_specs, to be assigned before the
loop in nl80211_set_sar_specs(). Leave the final assignment after the
loop in place in case fewer ended up in the array.
Fixes: aa4ec06c45 ("wifi: cfg80211: use __counted_by where appropriate")
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/20250721183125.work.183-kees@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
S1G short beacons are an optional frame type used in an S1G BSS
that contain a limited set of elements. While they are optional,
they are a fundamental part of S1G that enables significant
power saving.
Expose 2 additional netlink attributes,
NL80211_ATTR_S1G_LONG_BEACON_PERIOD which denotes the number of beacon
intervals between each long beacon and NL80211_ATTR_S1G_SHORT_BEACON
which is a nested attribute containing the short beacon tail and
head. We split them as the long beacon period cannot be updated,
and is only used when initialisng the interface, whereas the short
beacon data can be used to both initialise and update the templates.
This follows how things such as the beacon interval and DTIM period
currently operate.
During the initialisation path, we ensure we have the long beacon
period if the short beacon data is being passed down, whereas
the update path will simply update the template if its sent down.
The short beacon data is validated using the same routines for regular
beacons as they support correctly parsing the short beacon format
while ensuring the frame is well-formed.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250717074205.312577-2-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This (partially) reverts commits
- 838c7b8f1f ("wifi: nl80211: Avoid address calculations via out of bounds array indexing")
- f1d3334d60 ("wifi: cfg80211: sme: init n_channels before channels[] access")
- 82bbe02b25 ("wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request")
These commits all set the structure to be in an inconsistent
state, setting n_channels to some value before them actually
being filled in. That's fine for what the code does now, but
with the removal of __counted_by() in 444020f4bf ("wifi:
cfg80211: remove scan request n_channels counted_by") it's no
longer needed and it does leave a bit of a landmine there
since breaking out of some code to send the scan or something
would leave it wrong.
Remove the now superfluous n_channels settings.
Link: https://patch.msgid.link/20250718103237.59510b2384c5.Ied5ba9c5c49efc008f4491c8ca7a45858a83f064@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In cfg80211_off_channel_oper_allowed(), the current logic disallows
off-channel operations if any link operates on a radar channel,
assuming such channels cannot be vacated. This assumption holds for
non-MLO interfaces but not for MLO.
With MLO and multi-radio devices, different links may operate on
separate radios. This allows one link to scan off-channel while
another remains on a radar channel. For example, in a 5 GHz
split-phy setup, the lower band can scan while the upper band
stays on a radar channel.
Off-channel operations can be allowed if the radio/link onto which the
input channel falls is different from the radio/link which has an active
radar channel. Therefore, fix cfg80211_off_channel_oper_allowed() by
returning false only if the requested channel maps to the same radio as
an active radar channel. Allow off-channel operations when the requested
channel is on a different radio, as in MLO with multi-radio setups.
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Signed-off-by: Amith A <quic_amitajit@quicinc.com>
Link: https://patch.msgid.link/20250714040742.538550-1-quic_amitajit@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
At present, the updated unsolicited broadcast probe response template is
not processed during userspace commands such as channel switch or color
change. This leads to an issue where older incorrect unsolicited probe
response is still used during these events.
Add support to parse the netlink attribute and store it so that
mac80211/drivers can use it to set the BSS_CHANGED_UNSOL_BCAST_PROBE_RESP
flag in order to send the updated unsolicited broadcast probe response
templates during these events.
Signed-off-by: Yuvarani V <quic_yuvarani@quicinc.com>
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250710-update_unsol_bcast_probe_resp-v2-1-31aca39d3b30@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR (net-6.16-rc6-2).
No conflicts.
Adjacent changes:
drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
c701574c54 ("wifi: mt76: mt7925: fix invalid array index in ssid assignment during hw scan")
b3a431fe2e ("wifi: mt76: mt7925: fix off by one in mt7925_mcu_hw_scan()")
drivers/net/wireless/mediatek/mt76/mt7996/mac.c
62da647a2b ("wifi: mt76: mt7996: Add MLO support to mt7996_tx_check_aggr()")
dc66a129ad ("wifi: mt76: add a wrapper for wcid access with validation")
drivers/net/wireless/mediatek/mt76/mt7996/main.c
3dd6f67c66 ("wifi: mt76: Move RCU section in mt7996_mcu_add_rate_ctrl()")
8989d8e90f ("wifi: mt76: mt7996: Do not set wcid.sta to 1 in mt7996_mac_sta_event()")
net/mac80211/cfg.c
58fcb1b428 ("wifi: mac80211: reject VHT opmode for unsupported channel widths")
037dc18ac3 ("wifi: mac80211: add support for storing station S1G capabilities")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of multi-radio wiphys, with per-radio RTS threshold brought
into use, RTS threshold for each radio in a wiphy can be recorded in
wiphy parameter - wiphy_radio_cfg, as an array. Add a new attribute -
NL80211_WIPHY_RADIO_ATTR_RTS_THRESHOLD in nested parameter -
NL80211_ATTR_WIPHY_RADIOS. When a request for getting RTS threshold
for a particular radio is received, parse the radio id and get the
required data. Add this data to the newly added nested attribute
NL80211_WIPHY_RADIO_ATTR_RTS_THRESHOLD. Add support to report this
data to userspace.
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Link: https://patch.msgid.link/20250615082312.619639-4-quic_rdevanat@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, setting RTS threshold is based on per-phy basis, i.e., all the
radios present in a wiphy will take RTS threshold value to be the one sent
from userspace. But each radio in a multi-radio wiphy can have different
RTS threshold requirements.
To extend support to set RTS threshold for each radio, get the radio for
which RTS threshold needs to be changed from the user. Use the attribute
in NL - NL80211_ATTR_WIPHY_RADIO_INDEX, to identify the radio of interest.
Create a new structure - wiphy_radio_cfg and add rts_threshold in it as a
u32 value to store RTS threshold of each radio in a wiphy and allocate
memory for it during wiphy register based on the wiphy.n_radio updated by
drivers. Pass radio id received from the user to mac80211 drivers along
with its corresponding RTS threshold.
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Link: https://patch.msgid.link/20250615082312.619639-3-quic_rdevanat@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, per-radio attributes are set on per-phy basis, i.e., all the
radios present in a wiphy will take attributes values sent from user. But
each radio in a wiphy can get different values from userspace based on
its requirement.
To extend support to set per-radio attributes, add support to get radio
index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX,
to get user specified radio index for which attributes should be changed.
Pass this to individual drivers, so that the drivers can use this radio
index to change per-radio attributes when necessary. Currently, per-radio
attributes identified are:
NL80211_ATTR_WIPHY_TX_POWER_LEVEL
NL80211_ATTR_WIPHY_ANTENNA_TX
NL80211_ATTR_WIPHY_ANTENNA_RX
NL80211_ATTR_WIPHY_RETRY_SHORT
NL80211_ATTR_WIPHY_RETRY_LONG
NL80211_ATTR_WIPHY_FRAG_THRESHOLD
NL80211_ATTR_WIPHY_RTS_THRESHOLD
NL80211_ATTR_WIPHY_COVERAGE_CLASS
NL80211_ATTR_TXQ_LIMIT
NL80211_ATTR_TXQ_MEMORY_LIMIT
NL80211_ATTR_TXQ_QUANTUM
By default, the radio index is set to -1. This means the attribute should
be treated as a global configuration. If the user has not specified any
index, then the radio index passed to individual drivers would be -1. This
would indicate that the attribute applies to all radios in that wiphy.
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Link: https://patch.msgid.link/20250615082312.619639-2-quic_rdevanat@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, sinfo->filled is for set in sta_set_sinfo() after filling
the corresponding fields in station_info structure for station statistics.
For non-ML stations, the fields are correctly filled from sta->deflink
and corresponding sinfo->filled bit are set, but for MLO any one of
link's data is filled and corresponding sinfo->filled bit is set.
For MLO before embed NL message, fields of sinfo structure like
bytes, packets, signal are updated with accumulated, best, least of all
links data. But some of fields like rssi, pertid don't make much sense
at MLO level.
Hence, to prevent misinterpretation, clear sinfo->filled for fields
which don't make much sense at MLO level. This will prevent filling
misleading values in NL message.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-8-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, station_info structure is passed to fill station statistics
from mac80211/drivers. After NL message send to user space for requested
station statistics, memory for station statistics is freed in cfg80211.
Therefore, memory allocation/free for link station statistics should
also happen in cfg80211 only.
Hence, allocate the memory for link_station structure for all
possible links and free in cfg80211_sinfo_release_content().
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-6-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently statistics are handled at link level for multi-link
operation(MLO). There is no provision to check accumulated statistics
for a multi-link(ML) station. Other statistics, such as signal, rates,
are also managed at the link level only.
Statistics such as packets, bytes, signal, rates, etc are useful to
provide overall overview for the ML stations.
Statistics such as packets, bytes are accumulated statistics at MLO level.
However, MLO statistics for rates and signal can not be accumulated since
it won't make much sense. Hence, handle other statistics such as signal,
rates, etc bit differently at MLO level.
The signal could be the best of all links-
e.g. if Link 1 has a signal strength of -70 dBm and Link 2 has -65 dBm,
the signal for MLO will be -65 dBm.
The rate could be determined based on the most recently updated link-
e.g. if link 1 has a rate of 300 Mbps and link 2 has a rate of 450 Mbps,
the MLO rate can be calculated based on the inactivity of each link.
If the inactive time for link 1 is 20 seconds and for link 2 is 10 seconds,
the MLO rate will be the most recently updated rate, which is link 2's
rate of 450 Mbps.
The inactive time, dtim_period and beacon_interval can be taken as the
least value of field from link level.
Similarly, other MLO level applicable fields are handled and the fields
which don't make much sense at MLO level, a subsequent change will handle
to embed NL message.
Hence, add accumulated and other statistics for MLO station if valid links
are present to represent comprehensive overview for the ML stations.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-5-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, statistics is supported at deflink( or one of the links)
level for station. This has problems when applied to multi-link(ML)
connections.
Hence, add changes to support link level statistics to embed NL message
with link related information if valid links are present.
This will be helpful to check the link related statistics during MLO.
The statistics will be embedded into NL message as below:
For non-ML:
cmd->
NL80211_ATTR_IFINDEX
NL80211_ATTR_MAC
NL80211_ATTR_GENERATION
....etc
NL80211_ATTR_STA_INFO | nested
NL80211_STA_INFO_CONNECTED_TIME,
NL80211_STA_INFO_STA_FLAGS,
NL80211_STA_INFO_RX_BYTES,
NL80211_STA_INFO_TX_BYTES,
.........etc
For MLO:
cmd ->
NL80211_ATTR_IFINDEX
NL80211_ATTR_MAC
NL80211_ATTR_GENERATION
.......etc
NL80211_ATTR_STA_INFO | nested
NL80211_STA_INFO_CONNECTED_TIME,
NL80211_STA_INFO_STA_FLAGS,
........etc
NL80211_ATTR_MLO_LINK_ID,
NL80211_ATTR_MLD_ADDR,
NL80211_ATTR_MLO_LINKS | nested
link_id-1 | nested
NL80211_ATTR_MLO_LINK_ID,
NL80211_ATTR_MAC,
NL80211_ATTR_STA_INFO | nested
NL80211_STA_INFO_RX_BYTES,
NL80211_STA_INFO_TX_BYTES,
NL80211_STA_INFO_CONNECTED_TIME,
..........etc.
link_id-2 | nested
NL80211_ATTR_MLO_LINK_ID,
NL80211_ATTR_MAC,
NL80211_ATTR_STA_INFO | nested
NL80211_STA_INFO_RX_BYTES,
NL80211_STA_INFO_TX_BYTES,
NL80211_STA_INFO_CONNECTED_TIME,
.........etc
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-4-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The nl80211_parse_connkeys() function currently uses kfree() to release
the 'result' structure in error handling paths. However, if an error
occurs due to result->def being less than 0, the 'result' structure may
contain sensitive information.
To prevent potential leakage of sensitive data, replace kfree() with
kfree_sensitive() when freeing 'result'. This change aligns with the
approach used in its caller, nl80211_join_ibss(), enhancing the overall
security of the wireless subsystem.
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://patch.msgid.link/20250523110156.4017111-1-zilin@seu.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The Enhanced multi-link single-radio (EMLSR) operation allows a non-AP MLD
with multiple receive chains to listen on one or more EMLSR links when the
corresponding non-AP STA(s) affiliated with the non-AP MLD is (are) in
the awake state. [IEEE 802.11be-2024, (35.3.17 Enhanced multi-link
single-radio (EMLSR) operation)]
An MLD which intends to enable EMLSR operations will set the EML
Capabilities Present subfield to 1 and shall set the EMLSR Support
subfield in the Common Info field of the Basic Multi-Link element to 1 in
all Management frames that include the Basic Multi-Link element except
Authentication frames. EML capabilities contains information such as
EML Transition timeout, Padding delay and Transition delay. These fields
needs to updated to drivers to trigger EMLSR operation and to transmit and
receive initial control frame and data frames.
Add support to receive EML Capabilities subfield that non-AP MLD
advertises during (re)association request and send it to underlying
drivers during ADD/SET station.
Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://patch.msgid.link/20250327051320.3253783-2-quic_ramess@quicinc.com
[accept EMLSR capabilities only for unassoc AP STA]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are a few conflicts between the work that went
into wireless and that's here now, resolve them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
tools/testing/selftests/drivers/net/ping.py
75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
de94e86974 ("selftests: drv-net: store addresses in dict indexed by ipver")
https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/
net/core/devmem.c
a70f891e0f ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()")
1d22d3060b ("net: drop rtnl_lock for queue_mgmt operations")
https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/
Adjacent changes:
tools/testing/selftests/net/Makefile
6f50175cca ("selftests: Add IPv6 link-local address generation tests for GRE devices.")
2e5584e0f9 ("selftests/net: expand cmsg_ipv6.sh with ipv4")
drivers/net/ethernet/broadcom/bnxt/bnxt.c
661958552e ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic")
fe96d717d3 ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
net/ethtool/cabletest.c
2bcf4772e4 ("net: ethtool: try to protect all callback with netdev instance lock")
637399bf7e ("net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device")
No Adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, as multi-link operation(MLO) is not supported for mesh,
reorganize the sinfo structure for mesh-specific fields and embed
mesh related NL attributes together in organized view.
This will allow for the simplified reorganization of sinfo structure
for link level in a subsequent patch to add support for MLO station
statistics.
No functionality changes added.
Pahole summary before the reorg of sinfo structure:
- size: 256, cachelines: 4, members: 50
- sum members: 239, holes: 4, sum holes: 17
- paddings: 2, sum paddings: 2
- forced alignments: 1, forced holes: 1, sum forced holes: 1
Pahole summary after the reorg of sinfo structure:
- size: 248, cachelines: 4, members: 50
- sum members: 239, holes: 4, sum holes: 9
- paddings: 2, sum paddings: 2
- forced alignments: 1, last cacheline: 56 bytes
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250213171632.1646538-2-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
