usb_remove_config() was added in 2012's
commit Fixes: 51cce6fc15 ("usb: gadget: composite: Add
usb_remove_config")
but has remained unused.
I see there was a use in drivers/staging/cch that
was removed by
commit 515e6dd20b ("Staging: ccg: delete it from the tree")
but it had it's own copy of usb_remove_config()
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250608233338.179894-3-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tegra_ehci_phy_restore_start() and tegra_ehci_phy_restore_end()
last use was removed in 2013 by
commit a4faa54e3a ("USB: EHCI: tegra: remove all power management")
tegra_usb_phy_preresume() and tegra_usb_phy_postresume() last
use was removed in 2020 by
commit c3590c7656 ("usb: host: ehci-tegra: Remove the driver")
(Although that one makes me wonder how much of the rest of the file
is actually used)
Remove both sets.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250603203905.279307-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the gpio irqchip connected to a slow bus(e.g., i2c bus or virtio
bus), calling disable_irq_nosync() in top-half ISR handler will trigger
the following kernel BUG:
BUG: scheduling while atomic: RenderEngine/253/0x00010002
...
Call trace:
dump_backtrace+0x0/0x1c8
show_stack+0x1c/0x2c
dump_stack_lvl+0xdc/0x12c
dump_stack+0x1c/0x64
__schedule_bug+0x64/0x80
schedule_debug+0x98/0x118
__schedule+0x68/0x704
schedule+0xa0/0xe8
schedule_timeout+0x38/0x124
wait_for_common+0xa4/0x134
wait_for_completion+0x1c/0x2c
_virtio_gpio_req+0xf8/0x198
virtio_gpio_irq_bus_sync_unlock+0x94/0xf0
__irq_put_desc_unlock+0x50/0x54
disable_irq_nosync+0x64/0x94
fusb302_irq_intn+0x24/0x84
__handle_irq_event_percpu+0x84/0x278
handle_irq_event+0x64/0x14c
handle_level_irq+0x134/0x1d4
generic_handle_domain_irq+0x40/0x68
virtio_gpio_event_vq+0xb0/0x130
vring_interrupt+0x7c/0x90
vm_interrupt+0x88/0xd8
__handle_irq_event_percpu+0x84/0x278
handle_irq_event+0x64/0x14c
handle_fasteoi_irq+0x110/0x210
__handle_domain_irq+0x80/0xd0
gic_handle_irq+0x78/0x154
el0_irq_naked+0x60/0x6c
This patch replaces request_irq() with devm_request_threaded_irq() to
avoid the use of disable_irq_nosync().
Signed-off-by: Yongbo Zhang <giraffesnn123@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250526043433.673097-1-giraffesnn123@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When multiple Apple devices are connected concurrently, the
apple-mfi-fastcharge driver fails to probe the subsequent devices with
the following error:
sysfs: cannot create duplicate filename '/class/power_supply/apple_mfi_fastcharge'
apple-mfi-fastcharge 5-2.4.3.3: probe of 5-2.4.3.3 failed with error -17
This happens because the driver uses a fixed power supply name
("apple_mfi_fastcharge") for all devices, causing a sysfs name
conflict when a second device is connected.
Fix this by generating unique names using the USB bus and device
number (e.g., "apple_mfi_fastcharge_5-12"). This ensures each
connected device gets a unique power supply entry in sysfs.
The change requires storing a copy of the power_supply_desc structure
in the per-device mfi_device struct, since the name pointer needs to
remain valid for the lifetime of the power supply registration.
Fixes: 249fa8217b ("USB: Add driver to control USB fast charge for iOS devices")
Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net>
Link: https://lore.kernel.org/r/20250602-apple-mfi-fastcharge-duplicate-sysfs-v1-1-5d84de34fac6@posteo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds a shutdown callback to ensure that the XHCI stack is properly
shutdown in reboot/shutdown path.
In kexec flow, kernel_restart_prepare() performs actions necessary
to prepare the system for a restart and invokes device_shutdown. To
ensure proper shutdown attach the dwc3 shutdown implementation which
mirrors the remove method.
$ kexec -e
<snip>
xhci-hcd xhci-hcd.0.auto: remove, state 1
usb usb1: USB disconnect, device number 1
usb 1-1: USB disconnect, device number 6
xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
kexec_core: Starting new kernel
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/1748977771-714153-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the function usb_endpoint_num() and usb_endpoint_type()
rather than constants.
The Coccinelle semantic patch is as follows:
@@ struct usb_endpoint_descriptor *epd; @@
- (epd->bEndpointAddress & \(USB_ENDPOINT_NUMBER_MASK\|0x0f\))
+ usb_endpoint_num(epd)
@@ struct usb_endpoint_descriptor *epd; @@
- (epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\))
+ usb_endpoint_type(epd)
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250618040204.363383-1-nichen@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the function usb_endpoint_num() and usb_endpoint_type()
rather than constants.
The Coccinelle semantic patch is as follows:
@@ struct usb_endpoint_descriptor *epd; @@
- (epd->bEndpointAddress & \(USB_ENDPOINT_NUMBER_MASK\|0x0f\))
+ usb_endpoint_num(epd)
@@ struct usb_endpoint_descriptor *epd; @@
- (epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\))
+ usb_endpoint_type(epd)
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250618041222.408372-1-nichen@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the function usb_endpoint_num() and usb_endpoint_type()
rather than constants.
The Coccinelle semantic patch is as follows:
@@ struct usb_endpoint_descriptor *epd; @@
- (epd->bEndpointAddress & \(USB_ENDPOINT_NUMBER_MASK\|0x0f\))
+ usb_endpoint_num(epd)
@@ struct usb_endpoint_descriptor *epd; @@
- (epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\))
+ usb_endpoint_type(epd)
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250618070714.817146-1-nichen@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.16-rc1.
Included in here are the following:
- USB offload support for audio devices.
I think this takes the record for the most number of patch series
(30+) over the longest period of time (2+ years) to get merged
properly.
Many props go to Wesley Cheng for seeing this effort through, they
took a major out-of-tree hacked-up-monstrosity that was created by
multiple vendors for their specific devices, got it all merged into
a semi-coherent set of changes, and got all of the different major
subsystems to agree on how this should be implemented both with
changes to their code as well as userspace apis, AND wrangled the
hardware companies into agreeing to go forward with this, despite
making them all redo work they had already done in their private
device trees.
This feature offers major power savings on embedded devices where a
USB audio stream can continue to flow while the rest of the system
is sleeping, something that devices running on battery power really
care about. There are still some more small tweaks left to be done
here, and those patches are still out for review and arguing among
the different hardware companies, but this is a major step forward
and a great example of how to do upstream development well.
- small number of thunderbolt fixes and updates, things seem to be
slowing down here (famous last words...)
- xhci refactors and reworking to try to handle some rough corner
cases in some hardware implementations where things don't always
work properly
- typec driver updates
- USB3 power management reworking and updates
- Removal of some old and orphaned UDC gadget drivers that had not
been used in a very long time, dropping over 11 thousand lines from
the tree, always a nice thing, making up for the 12k lines added
for the USB offload feature.
- lots of little updates and fixes in different drivers
All of these have been in linux-next for over 2 weeks, the USB offload
logic has been in there for 8 weeks now, with no reported issues"
* tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
ALSA: usb-audio: qcom: fix USB_XHCI dependency
ASoC: qdsp6: fix compile-testing without CONFIG_OF
usb: misc: onboard_usb_dev: fix build warning for CONFIG_USB_ONBOARD_DEV_USB5744=n
usb: typec: tipd: fix typo in TPS_STATUS_HIGH_VOLAGE_WARNING macro
USB: typec: fix const issue in typec_match()
USB: gadget: udc: fix const issue in gadget_match_driver()
USB: gadget: fix up const issue with struct usb_function_instance
USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB
USB: serial: bus: fix const issue in usb_serial_device_match()
usb: usbtmc: Fix timeout value in get_stb
usb: usbtmc: Fix read_stb function and get_stb ioctl
ALSA: qc_audio_offload: try to reduce address space confusion
ALSA: qc_audio_offload: avoid leaking xfer_buf allocation
ALSA: qc_audio_offload: rename dma/iova/va/cpu/phys variables
ALSA: usb-audio: qcom: Fix an error handling path in qc_usb_audio_probe()
usb: misc: onboard_usb_dev: Fix usb5744 initialization sequence
dt-bindings: usb: ti,usb8041: Add binding for TI USB8044 hub controller
usb: misc: onboard_usb_dev: Add support for TI TUSB8044 hub
usb: gadget: lpc32xx_udc: Use USB API functions rather than constants
usb: gadget: epautoconf: Use USB API functions rather than constants
...
Pull LED updates from Lee Jones:
"LED Triggers:
- Allow writing "default" to the sysfs 'trigger' attribute to set an
LED to its default trigger
- If the default trigger is "none", writing "default" will remove the
current trigger
- Updated sysfs ABI documentation for the new "default" trigger
functionality
LED KUnit Testing:
- Provide a skeleton KUnit test suite for the LEDs framework
- Expand the LED class device registration KUnit test to cover more
scenarios, including 'brightness_get' behavior
- Add KUnit tests for the LED lookup and get API ('led_add_lookup',
'devm_led_get')
LED Flash Class:
- Add support for setting flash/strobe duration through a new
'duration_set' op and 'led_set_flash_duration()' function, aligning
with 'V4L2_CID_FLASH_DURATION'
Texas Instruments TPS6131x:
- Add a new driver for the TPS61310/TPS61311 flash LED controllers
- The driver supports the device's three constant-current sinks for
flash and torch modes
LED Core:
- Prevent potential 'snprintf()' truncations in LED names by checking
for buffer overflows
ChromeOS EC LEDs:
- Avoid a -Wflex-array-member-not-at-end GCC warning by replacing an
on-stack flexible structure definition with a utility function call
Multicolor LEDs:
- Fix issue where setting multi_intensity while software blinking is
active could stop blinking
PCA955x LEDs:
- Avoid potential buffer overflow when creating default labels by
changing a field's type to 'u8' and updating format specifiers
PCA995x LEDs:
- Fix a typo (stray space) in an 'of_device_id' entry in the
'pca995x_of_match' table
Kconfig:
- Prevent LED drivers from being enabled by default when
'COMPILE_TEST' is set
Device Property API:
- Split 'device_get_child_node_count()' into a new helper
'fwnode_get_child_node_count()' that doesn't require a device
struct, making the API more symmetrical
Driver Modernization (using 'fwnode_get_child_node_count()'):
- Update 'leds-pwm-multicolor', 'leds-ncp5623' and 'leds-ncp5623' to
use the new 'fwnode_get_child_node_count()' helper, removing their
custom implementation
- As above in the USB Type-C TCPM driver
Driver Modernization (using new GPIO setter callbacks):
- Convert 'leds-lgm-sso' to use new GPIO line value setter callbacks
which return an integer for error handling
- Convert 'leds-pca955x', 'leds-pca9532' and 'leds-tca6507' to use
new GPIO setter callbacks
Documentation:
- Remove the '.rst' extension for 'leds-st1202' in the documentation
index for consistency
LP8860 LEDs:
- Use 'regmap_multi_reg_write()' for EEPROM writes instead of manual
looping
- Use scoped mutex guards and 'devm_mutex_init()' to simplify
function exits and ensure automatic cleanup
- Remove default register definitions that are unused when regmap
caching is not active
- Use 'devm_regulator_get_enable_optional()' to handle the optional
regulator, simplifying enabling and removing manual disabling
- Refactor 'lp8860_unlock_eeprom()' to only perform the unlock
operation, removing the lock part and an unnecessary parameter
- Use a 'devm' action to disable the enable-GPIO, simplifying cleanup
and error paths, and remove the now-empty '.remove()' function
Turris Omnia LEDs:
- Drop unnecessary commas in terminator entries of 'struct attribute'
and 'struct of_device_id' arrays
MT6370 RGB LEDs:
- Use the 'LINEAR_RANGE()' for defining 'struct linear_range' entries
to improve robustness
Texas Instruments TPS6131x:
- Add new devicetree bindings for the TI TPS61310/TPS61311 flash LED
driver"
* tag 'leds-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (31 commits)
leds: tps6131x: Add support for Texas Instruments TPS6131X flash LED driver
dt-bindings: leds: Add Texas Instruments TPS6131x flash LED driver
leds: flash: Add support for flash/strobe duration
leds: rgb: leds-mt6370-rgb: Improve definition of some struct linear_range
leds: led-test: Provide tests for the lookup and get infrastructure
leds: led-test: Fill out the registration test to cover more test cases
leds: led-test: Remove standard error checking after KUNIT_ASSERT_*()
leds: pca995x: Fix typo in pca995x_of_match's of_device_id entry
leds: Provide skeleton KUnit testing for the LEDs framework
leds: tca6507: Use new GPIO line value setter callbacks
leds: pca9532: Use new GPIO line value setter callbacks
leds: pca955x: Use new GPIO line value setter callbacks
leds: lgm-sso: Use new GPIO line value setter callbacks
leds: Do not enable by default during compile testing
leds: turris-omnia: Drop commas in the terminator entries
leds: lp8860: Disable GPIO with devm action
leds: lp8860: Only unlock in lp8860_unlock_eeprom()
leds: lp8860: Enable regulator using enable_optional helper
leds: lp8860: Remove default regs when not caching
leds: lp8860: Use new mutex guards to cleanup function exits
...
Pull HID updates from Jiri Kosina:
- support for Apple Magic Mouse 2 USB-C (Aditya Garg)
- power management improvement for multitouch devices (Werner Sembach)
- fix for ACPI initialization in intel-thc driver (Wentao Guan)
- adaptation of HID drivers to use new gpio_chip's line setter
callbacks (Bartosz Golaszewski)
- fix potential OOB in usbhid_parse() (Terry Junge)
- make it possible to set hid_mouse_ignore_list dynamically (the same
way we handle other quirks) (Aditya Garg)
- other small assorted fixes and device ID additions
* tag 'hid-for-linus-2025060301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: multitouch: Disable touchpad on firmware level while not in use
HID: core: Add functions for HID drivers to react on first open and last close call
HID: HID_APPLETB_BL should depend on X86
HID: HID_APPLETB_KBD should depend on X86
HID: appletb-kbd: Use secs_to_jiffies() instead of msecs_to_jiffies()
HID: intel-thc-hid: intel-thc: make read-only arrays static const
HID: magicmouse: Apple Magic Mouse 2 USB-C support
HID: mcp2221: use new line value setter callbacks
HID: mcp2200: use new line value setter callbacks
HID: cp2112: use new line value setter callbacks
HID: cp2112: use lock guards
HID: cp2112: hold the lock for the entire direction_output() call
HID: cp2112: destroy mutex on driver detach
HID: intel-thc-hid: intel-quicki2c: pass correct arguments to acpi_evaluate_object
HID: corsair-void: Use to_delayed_work()
HID: hid-logitech: use sysfs_emit_at() instead of scnprintf()
HID: quirks: Add HID_QUIRK_IGNORE_MOUSE quirk
HID: usbhid: Eliminate recurrent out-of-bounds bug in usbhid_parse()
HID: Kysona: Add periodic online check
Pull power management updates from Rafael Wysocki:
"Once again, the changes are dominated by cpufreq updates, but this
time the majority of them are cpufreq core changes, mostly related to
the introduction of policy locking guards and __free() usage, and
fixes related to boost handling.
Still, there is also a significant update of the intel_pstate driver
making it register an energy model when running on a hybrid platform
which is used for enabling energy-aware scheduling (EAS) if the driver
operates in the passive mode (and schedutil is used as the cpufreq
governor for all CPUs which is the passive mode default).
There are some amd-pstate driver updates too, for a good measure,
including the "Requested CPU Min frequency" BIOS option support and
new online/offline callbacks.
In the cpuidle space, the most significant change is the addition of a
C1 demotion on/off sysfs knob to intel_idle which should help some
users to configure their systems more precisely. There is also the
conversion of the PSCI cpuidle driver to a faux device one and there
are two small updates of cpuidle governors.
Device power management is also modified quite a bit, especially the
handling of devices with asynchronous suspend and resume enabled
during system transitions. They are now going to be handled more
asynchronously during suspend transitions and somewhat less
aggressively during resume transitions.
Apart from the above, the operating performance points (OPP) library
is now going to use mutex locking guards and scope-based cleanup
helpers and there is the usual bunch of assorted fixes and code
cleanups.
Specifics:
- Fix potential division-by-zero error in em_compute_costs() (Yaxiong
Tian)
- Fix typos in energy model documentation and example driver code
(Moon Hee Lee, Atul Kumar Pant)
- Rearrange the energy model management code and add a new function
for adjusting a CPU energy model after adjusting the capacity of
the given CPU to it (Rafael Wysocki)
- Refactor cpufreq_online(), add and use cpufreq policy locking
guards, use __free() in policy reference counting, and clean up
core cpufreq code on top of that (Rafael Wysocki)
- Fix boost handling on CPU suspend/resume and sysfs updates (Viresh
Kumar)
- Fix des_perf clamping with max_perf in amd_pstate_update()
(Dhananjay Ugwekar)
- Add offline, online and suspend callbacks to the amd-pstate driver,
rename and use the existing amd_pstate_epp callbacks in it
(Dhananjay Ugwekar)
- Add support for the "Requested CPU Min frequency" BIOS option to
the amd-pstate driver (Dhananjay Ugwekar)
- Reset amd-pstate driver mode after running selftests (Swapnil
Sapkal)
- Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan
Chancellor)
- Add helper for governor checks to the schedutil cpufreq governor
and move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki)
- Populate the cpu_capacity sysfs entries from the intel_pstate
driver after registering asym capacity support (Ricardo Neri)
- Add support for enabling Energy-aware scheduling (EAS) to the
intel_pstate driver when operating in the passive mode on a hybrid
platform (Rafael Wysocki)
- Drop redundant cpus_read_lock() from store_local_boost() in the
cpufreq core (Seyediman Seyedarab)
- Replace sscanf() with kstrtouint() in the cpufreq code and use a
symbol instead of a raw number in it (Bowen Yu)
- Add support for autonomous CPU performance state selection to the
CPPC cpufreq driver (Lifeng Zheng)
- OPP: Add dev_pm_opp_set_level() (Praveen Talari)
- Introduce scope-based cleanup headers and mutex locking guards in
OPP core (Viresh Kumar)
- Switch OPP to use kmemdup_array() (Zhang Enpei)
- Optimize bucket assignment when next_timer_ns equals KTIME_MAX in
the menu cpuidle governor (Zhongqiu Han)
- Convert the cpuidle PSCI driver to a faux device one (Sudeep Holla)
- Add C1 demotion on/off sysfs knob to the intel_idle driver (Artem
Bityutskiy)
- Fix typos in two comments in the teo cpuidle governor (Atul Kumar
Pant)
- Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
Kalla)
- Move debug runtime PM attributes to runtime_attrs[] (Rafael
Wysocki)
- Add new devm_ functions for enabling runtime PM and runtime PM
reference counting (Bence Csókás)
- Remove size arguments from strscpy() calls in the hibernation core
code (Thorsten Blum)
- Adjust the handling of devices with asynchronous suspend enabled
during system suspend and resume to start resuming them immediately
after resuming their parents and to start suspending such a device
immediately after suspending its first child (Rafael Wysocki)
- Adjust messages printed during tasks freezing to avoid using
pr_cont() (Andrew Sayers, Paul Menzel)
- Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
Zhang)
- Add missing wakeup source attribute relax_count to sysfs and remove
the space character at the end ofi the string produced by
pm_show_wakelocks() (Zijun Hu)
- Add configurable pm_test delay for hibernation (Zihuan Zhang)
- Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
cypd4226 device on Tegra boards from suspending prematurely (Jon
Hunter)
- Unbreak printing PM debug messages during hibernation and clean up
some related code (Rafael Wysocki)
- Add a systemd service to run cpupower and change cpupower binding's
Makefile to use -lcpupower (John B. Wyatt IV, Francesco Poli)"
* tag 'pm-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
cpufreq: CPPC: Add support for autonomous selection
cpufreq: Update sscanf() to kstrtouint()
cpufreq: Replace magic number
OPP: switch to use kmemdup_array()
PM: freezer: Rewrite restarting tasks log to remove stray *done.*
PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn()
cpufreq: drop redundant cpus_read_lock() from store_local_boost()
cpupower: do not install files to /etc/default/
cpupower: do not call systemctl at install time
cpupower: do not write DESTDIR to cpupower.service
PM: sleep: Introduce pm_sleep_transition_in_progress()
cpufreq/amd-pstate: Avoid shadowing ret in amd_pstate_ut_check_driver()
cpufreq: intel_pstate: Document hybrid processor support
cpufreq: intel_pstate: EAS: Increase cost for CPUs using L3 cache
cpufreq: intel_pstate: EAS support for hybrid platforms
PM: EM: Introduce em_adjust_cpu_capacity()
PM: EM: Move CPU capacity check to em_adjust_new_capacity()
PM: EM: Documentation: Fix typos in example driver code
cpufreq: Drop policy locking from cpufreq_policy_is_good_for_eas()
PM: sleep: Introduce pm_suspend_in_progress()
...
Pull timer cleanups from Thomas Gleixner:
"Another set of timer API cleanups:
- Convert init_timer*(), try_to_del_timer_sync() and
destroy_timer_on_stack() over to the canonical timer_*()
namespace convention.
There is another large conversion pending, which has not been included
because it would have caused a gazillion of merge conflicts in next.
The conversion scripts will be run towards the end of the merge window
and a pull request sent once all conflict dependencies have been
merged"
* tag 'timers-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename destroy_timer_on_stack() as timer_destroy_on_stack()
treewide, timers: Rename try_to_del_timer_sync() as timer_delete_sync_try()
timers: Rename init_timers() as timers_init()
timers: Rename NEXT_TIMER_MAX_DELTA as TIMER_NEXT_MAX_DELTA
timers: Rename __init_timer_on_stack() as __timer_init_on_stack()
timers: Rename __init_timer() as __timer_init()
timers: Rename init_timer_on_stack_key() as timer_init_key_on_stack()
timers: Rename init_timer_key() as timer_init_key()
Merge updates related to system sleep handling and runtime PM for 6.16-rc1:
- Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
Kalla).
- Move debug runtime PM attributes to runtime_attrs[] (Rafael Wysocki).
- Add new devm_ functions for enabling runtime PM and runtime PM
reference counting (Bence Csókás).
- Remove size arguments from strscpy() calls in the hibernation core
code (Thorsten Blum).
- Adjust the handling of devices with asynchronous suspend enabled
during system suspend and resume to start resuming them immediately
after resuming their parents and to start suspending such a device
immediately after suspending its first child (Rafael Wysocki).
- Adjust messages printed during tasks freezing to avoid using
pr_cont() (Andrew Sayers, Paul Menzel).
- Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
Zhang).
- Add missing wakeup source attribute relax_count to sysfs and
remove the space character at the end ofi the string produced by
pm_show_wakelocks() (Zijun Hu).
- Add configurable pm_test delay for hibernation (Zihuan Zhang).
- Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
cypd4226 device on Tegra boards from suspending prematurely (Jon
Hunter).
- Unbreak printing PM debug messages during hibernation and clean up
some related code (Rafael Wysocki).
* pm-runtime:
PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn()
PM: sysfs: Move debug runtime PM attributes to runtime_attrs[]
PM: runtime: Add new devm functions
* pm-sleep:
PM: freezer: Rewrite restarting tasks log to remove stray *done.*
PM: sleep: Introduce pm_sleep_transition_in_progress()
PM: sleep: Introduce pm_suspend_in_progress()
PM: sleep: Print PM debug messages during hibernation
ucsi_ccg: Disable async suspend in ucsi_ccg_probe()
PM: hibernate: add configurable delay for pm_test
PM: wakeup: Delete space in the end of string shown by pm_show_wakelocks()
PM: wakeup: Add missing wakeup source attribute relax_count
PM: sleep: Remove unnecessary !!
PM: sleep: Use two lines for "Restarting..." / "done" messages
PM: sleep: Make suspend of devices more asynchronous
PM: sleep: Suspend async parents after suspending children
PM: sleep: Resume children after resuming the parent
PM: hibernate: Remove size arguments when calling strscpy()
Pull block updates from Jens Axboe:
- ublk updates:
- Add support for updating the size of a ublk instance
- Zero-copy improvements
- Auto-registering of buffers for zero-copy
- Series simplifying and improving GET_DATA and request lookup
- Series adding quiesce support
- Lots of selftests additions
- Various cleanups
- NVMe updates via Christoph:
- add per-node DMA pools and use them for PRP/SGL allocations
(Caleb Sander Mateos, Keith Busch)
- nvme-fcloop refcounting fixes (Daniel Wagner)
- support delayed removal of the multipath node and optionally
support the multipath node for private namespaces (Nilay Shroff)
- support shared CQs in the PCI endpoint target code (Wilfred
Mallawa)
- support admin-queue only authentication (Hannes Reinecke)
- use the crc32c library instead of the crypto API (Eric Biggers)
- misc cleanups (Christoph Hellwig, Marcelo Moreira, Hannes
Reinecke, Leon Romanovsky, Gustavo A. R. Silva)
- MD updates via Yu:
- Fix that normal IO can be starved by sync IO, found by mkfs on
newly created large raid5, with some clean up patches for bdev
inflight counters
- Clean up brd, getting rid of atomic kmaps and bvec poking
- Add loop driver specifically for zoned IO testing
- Eliminate blk-rq-qos calls with a static key, if not enabled
- Improve hctx locking for when a plug has IO for multiple queues
pending
- Remove block layer bouncing support, which in turn means we can
remove the per-node bounce stat as well
- Improve blk-throttle support
- Improve delay support for blk-throttle
- Improve brd discard support
- Unify IO scheduler switching. This should also fix a bunch of lockdep
warnings we've been seeing, after enabling lockdep support for queue
freezing/unfreezeing
- Add support for block write streams via FDP (flexible data placement)
on NVMe
- Add a bunch of block helpers, facilitating the removal of a bunch of
duplicated boilerplate code
- Remove obsolete BLK_MQ pci and virtio Kconfig options
- Add atomic/untorn write support to blktrace
- Various little cleanups and fixes
* tag 'for-6.16/block-20250523' of git://git.kernel.dk/linux: (186 commits)
selftests: ublk: add test for UBLK_F_QUIESCE
ublk: add feature UBLK_F_QUIESCE
selftests: ublk: add test case for UBLK_U_CMD_UPDATE_SIZE
traceevent/block: Add REQ_ATOMIC flag to block trace events
ublk: run auto buf unregisgering in same io_ring_ctx with registering
io_uring: add helper io_uring_cmd_ctx_handle()
ublk: remove io argument from ublk_auto_buf_reg_fallback()
ublk: handle ublk_set_auto_buf_reg() failure correctly in ublk_fetch()
selftests: ublk: add test for covering UBLK_AUTO_BUF_REG_FALLBACK
selftests: ublk: support UBLK_F_AUTO_BUF_REG
ublk: support UBLK_AUTO_BUF_REG_FALLBACK
ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG
ublk: prepare for supporting to register request buffer automatically
ublk: convert to refcount_t
selftests: ublk: make IO & device removal test more stressful
nvme: rename nvme_mpath_shutdown_disk to nvme_mpath_remove_disk
nvme: introduce multipath_always_on module param
nvme-multipath: introduce delayed removal of the multipath head node
nvme-pci: derive and better document max segments limits
nvme-pci: use struct_size for allocation struct nvme_dev
...
When the USB5744 option is disabled, the onboard_usb driver warns about
unused functions:
drivers/usb/misc/onboard_usb_dev.c:358:12: error: 'onboard_dev_5744_i2c_write_byte' defined but not used [-Werror=unused-function]
358 | static int onboard_dev_5744_i2c_write_byte(struct i2c_client *client, u16 addr, u8 data)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/usb/misc/onboard_usb_dev.c:313:12: error: 'onboard_dev_5744_i2c_read_byte' defined but not used [-Werror=unused-function]
313 | static int onboard_dev_5744_i2c_read_byte(struct i2c_client *client, u16 addr, u8 *data)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Extend the #ifdef block a little further to cover all of these functions.
Ideally we'd use use if(IS_ENABLED()) instead, but that doesn't currently
work because the i2c_transfer() and i2c_smbus_write_word_data() function
declarations are hidden when CONFIG_I2C is disabled.
Fixes: 1143d41922 ("usb: misc: onboard_usb_dev: Fix usb5744 initialization sequence")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250523120947.2170302-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gadget_match_driver() takes a const pointer, and then decides to cast it
away into a non-const one, which is not a good thing to do overall. Fix
this up by properly setting the pointers to be const to preserve that
attribute.
Fixes: d69d804845 ("driver core: have match() callback in struct bus_type take a const *")
Link: https://lore.kernel.org/r/2025052139-rash-unsaddle-7c5e@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In struct usb_function, the struct usb_function_instance pointer
variable "fi" is listed as const, but it is written to in numerous
places, making the const marking of it a total lie. Fix this up by just
removing the const pointer attribute as this is modified in numerous
places.
Link: https://lore.kernel.org/r/2025052145-undress-puma-f7cf@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan writes:
USB serial updates for 6.16-rc1
Here are the USB serial updates for 6.16-rc1, including:
- fix of an incorrect const cast
- removal of a bogus read urb sanity check
- support for a couple of new pl2303 device types
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.16-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB
USB: serial: bus: fix const issue in usb_serial_device_match()
USB: serial: ti_usb_3410_5052: drop bogus read urb check
usb_serial_device_match() takes a const pointer, and then decides to
cast it away into a non-const one, which is not a good thing to do
overall. Fix this up by properly setting the pointers to be const to
preserve that attribute.
Fixes: d69d804845 ("driver core: have match() callback in struct bus_type take a const *")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
The usbtmc488_ioctl_read_stb function relied on a positive return from
usbtmc_get_stb to reset the srq condition in the driver. The
USBTMC_IOCTL_GET_STB case tested for a positive return to return the stb
to the user.
Commit: <cac01bd178d6> ("usb: usbtmc: Fix erroneous get_stb ioctl
error returns") changed the return value of usbtmc_get_stb to 0 on
success instead of returning the value of usb_control_msg which is
positive in the normal case. This change caused the function
usbtmc488_ioctl_read_stb and the USBTMC_IOCTL_GET_STB ioctl to no
longer function correctly.
Change the test in usbtmc488_ioctl_read_stb to test for failure
first and return the failure code immediately.
Change the test for the USBTMC_IOCTL_GET_STB ioctl to test for 0
instead of a positive value.
Fixes: cac01bd178 ("usb: usbtmc: Fix erroneous get_stb ioctl error returns")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250521121656.18174-3-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In some cases, there is a small-time gap in which CMD_RING_BUSY can be
cleared by controller but adding command completion event to event ring
will be delayed. As the result driver will return error code.
This behavior has been detected on usbtest driver (test 9) with
configuration including ep1in/ep1out bulk and ep2in/ep2out isoc
endpoint.
Probably this gap occurred because controller was busy with adding some
other events to event ring.
The CMD_RING_BUSY is cleared to '0' when the Command Descriptor has been
executed and not when command completion event has been added to event
ring.
To fix this issue for this test the small delay is sufficient less than
10us) but to make sure the problem doesn't happen again in the future
the patch introduces 10 retries to check with delay about 20us before
returning error code.
Fixes: 3d82904559 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/PH7PR07MB9538AA45362ACCF1B94EE9B7DD96A@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb core avoids sending a Set-Interface altsetting 0 request after device
reset, and instead relies on calling usb_disable_interface() and
usb_enable_interface() to flush and reset host-side of those endpoints.
xHCI hosts allocate and set up endpoint ring buffers and host_ep->hcpriv
during usb_hcd_alloc_bandwidth() callback, which in this case is called
before flushing the endpoint in usb_disable_interface().
Call usb_disable_interface() before usb_hcd_alloc_bandwidth() to ensure
URBs are flushed before new ring buffers for the endpoints are allocated.
Otherwise host driver will attempt to find and remove old stale URBs
from a freshly allocated new ringbuffer.
Cc: stable <stable@kernel.org>
Fixes: 4fe0387afa ("USB: don't send Set-Interface after reset")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250514132520.225345-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Qualcomm DWC3 glue driver duplicates the logic of the bulk clock
API to acquire, prepare, and unprepare the controller's clocks. It also
manages the life cycle of these handled explicitly.
Transition to the bulk clock API and manage the resources using devres,
to clean up the code. The resource acquisition is moved above the
initial reset pulse, to handle resource issues before the state is
touched - other than this, this no functional change.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250508-dwc3-clk-bulk-v2-1-bad3427e88d4@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
