Limit tx/rx buffer address to 32-bit address space for board with more
than 4GB DRAM.
Fixes: 804775dfc2 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)")
Fixes: 6757d345dd ("net: ethernet: mtk_wed: introduce hw_rro support for MT7988")
Tested-by: Daniel Pawlik <pawlik.dan@gmail.com>
Tested-by: Matteo Croce <teknoraver@meta.com>
Signed-off-by: Rex Lu <rex.lu@mediatek.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit cc34acd577 ("docs: net: document new locking reality")
introduced netif_ vs dev_ function semantics: the former expects locked
netdev, the latter takes care of the locking. We don't strictly
follow this semantics on either side, but there are more dev_xxx handlers
now that don't fit. Rename them to netif_xxx where appropriate.
netif_close_many is used only by vlan/dsa and one mtk driver, so move it into
NETDEV_INTERNAL namespace.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250717172333.1288349-8-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the newly added of_reserved_mem_region_to_resource{_byname}()
functions to handle "memory-region" properties.
The error handling is a bit different for mtk_wed_mcu_load_firmware().
A failed match of the "memory-region-names" would skip the entry, but
then other errors in the lookup and retrieval of the address would not
skip the entry. However, that distinction is not really important.
Either the region is available and usable or it is not. So now, errors
from of_reserved_mem_region_to_resource() are ignored so the region is
simply skipped.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250703183459.2074381-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct spelling of platforms, various, and initial.
As flagged by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The purpose of resetting the TX queue is to reset the byte and packet
count as well as to clear the software flow control XOFF bit.
MediaTek developers pointed out that netdev_reset_queue would only
resets queue 0 of the network device.
Queues that are not reset may cause unexpected issues.
Packets may stop being sent after reset and "transmit timeout" log may
be displayed.
Import fix from MediaTek's SDK to resolve this issue.
Link: 319c0d9905
Fixes: f63959c7ee ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/c9ff9adceac4f152239a0f65c397f13547639175.1746406763.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The MediaTek MT7988 SoC comes with an single built-in Ethernet PHY for
2500Base-T/1000Base-T/100Base-TX/10Base-T link partners in addition to
the built-in 1GE switch. The built-in PHY only supports full duplex.
Add muxes allowing to select GMAC2->2.5G PHY path and add basic support
for XGMAC as the built-in 2.5G PHY is internally connected via XGMII.
The XGMAC features will also be used by 5GBase-R, 10GBase-R and USXGMII
SerDes modes which are going to be added once support for standalone PCS
drivers is in place.
In order to make use of the built-in 2.5G PHY the appropriate PHY driver
as well as (proprietary) PHY firmware has to be present as well.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/9072cefbff6db969720672ec98ed5cef65e8218c.1745715380.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When removing the clock bits for clocks which aren't used by the
Ethernet driver their names should also have been removed from the
mtk_clks_source_name array.
Remove them now as enum mtk_clks_map needs to match the
mtk_clks_source_name array so the driver can make sure that all required
clocks are present and correctly name missing clocks.
Fixes: 887b1d1adb ("net: ethernet: mtk_eth_soc: drop clocks unused by Ethernet driver")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/d075e706ff1cebc07f9ec666736d0b32782fd487.1745555321.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With commit 51a4df60db ("net: ethernet: mtk_eth_soc: convert caps in
mtk_soc_data struct to u64") the capabilities bitfield was converted to
a 64-bit value, but a cap_bit in struct mtk_eth_muxc which is used to
store a full bitfield (rather than the bit number, as the name would
suggest) still holds only a 32-bit value.
Change the type of cap_bit to u64 in order to avoid truncating the
bitfield which results in path selection to not work with capabilities
above the 32-bit limit.
The values currently stored in the cap_bit field are
MTK_ETH_MUX_GDM1_TO_GMAC1_ESW:
BIT_ULL(18) | BIT_ULL(5)
MTK_ETH_MUX_GMAC2_GMAC0_TO_GEPHY:
BIT_ULL(19) | BIT_ULL(5) | BIT_ULL(6)
MTK_ETH_MUX_U3_GMAC2_TO_QPHY:
BIT_ULL(20) | BIT_ULL(5) | BIT_ULL(6)
MTK_ETH_MUX_GMAC1_GMAC2_TO_SGMII_RGMII:
BIT_ULL(20) | BIT_ULL(5) | BIT_ULL(7)
MTK_ETH_MUX_GMAC12_TO_GEPHY_SGMII:
BIT_ULL(21) | BIT_ULL(5)
While all those values are currently still within 32-bit boundaries,
the addition of new capabilities of MT7988 as well as future SoC's
like MT7987 will exceed them. Also, the use of a 32-bit 'int' type to
store the result of a BIT_ULL(...) is misleading.
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/ded98b0d716c3203017a7a92151516ec2bf1abee.1745369249.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The airoha_eth driver has no codebase shared with mtk_eth_soc one.
Moreover, the upcoming features (flowtable hw offloading, PCS, ..) will
not reuse any code from MediaTek driver. Move the Airoha driver in a
dedicated folder.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mtk_foe_entry_set_vlan() in mtk_ppe.c already supports double vlan
tagging, but mtk_flow_offload_replace() in mtk_ppe_offload.c only allows
for 1 vlan tag, optionally in combination with pppoe and dsa tags.
However, mtk_foe_entry_set_vlan() only allows for setting the vlan id.
The protocol cannot be set, it is always ETH_P_8021Q, for inner and outer
tag. This patch adds QinQ support to mtk_flow_offload_replace(), only in
the case that both inner and outer tags are ETH_P_8021Q.
Only PPPoE-in-Q (as before) and Q-in-Q are allowed. A combination
of PPPoE and Q-in-Q is not allowed.
Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
Link: https://patch.msgid.link/20250225201509.20843-1-ericwouds@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For GSO packets, skb_cow_head() will reallocate the skb for TSO header
cloned skbs in airoha_dev_xmit(). For this reason, sinfo pointer can be
no more valid. Fix the issue relying on skb_shinfo() macro directly in
airoha_dev_xmit().
The problem exists since
commit 23020f0493 ("net: airoha: Introduce ethernet support for EN7581 SoC")
but it is not a user visible, since we can't currently enable TSO
for DSA user ports since we are missing to initialize net_device
vlan_features field.
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250213-airoha-en7581-flowtable-offload-v4-1-b69ca16d74db@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix wrong GDM4 register definition, in Airoha SDK GDM4 is defined at
offset 0x2400 but this doesn't make sense as it does conflict with the
CDM4 that is in the same location.
Following the pattern where each GDM base is at the FWD_CFG, currently
GDM4 base offset is set to 0x2500. This is correct but REG_GDM4_FWD_CFG
and REG_GDM4_SRC_PORT_SET are still using the SDK reference with the
0x2400 offset. Fix these 2 define by subtracting 0x100 to each register
to reflect the real address location.
Fixes: 23020f0493 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250120154148.13424-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce support for HTB Qdisc offload available in the Airoha EN7581
ethernet controller. EN7581 can offload only one level of HTB leafs.
Each HTB leaf represents a QoS channel supported by EN7581 SoC.
The typical use-case is creating a HTB leaf for QoS channel to rate
limit the egress traffic and attach an ETS Qdisc to each HTB leaf in
order to enforce traffic prioritization.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce support for ETS Qdisc offload available on the Airoha EN7581
ethernet controller. In order to be effective, ETS Qdisc must configured
as leaf of a HTB Qdisc (HTB Qdisc offload will be added in the following
patch). ETS Qdisc available on EN7581 ethernet controller supports at
most 8 concurrent bands (QoS queues). We can enable an ETS Qdisc for
each available QoS channel.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Airoha EN7581 SoC supports 32 Tx DMA rings used to feed packets to QoS
channels. Each channels supports 8 QoS queues where the user can apply
QoS scheduling policies. In a similar way, the user can configure hw
rate shaping for each QoS channel.
Introduce ndo_select_queue callback in order to select the tx queue
based on QoS channel and QoS queue. In particular, for dsa device select
QoS channel according to the dsa user port index, rely on port id
otherwise. Select QoS queue based on the skb priority.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is a preliminary patch in order to enable hw Qdisc offloading.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
