The original implementation used level detection for the first interrupt
after device reset to avoid potential interrupt line noise and missed
interrupts during the initialization phase. However, this approach
introduced unintended side effects when tested with certain touch panels,
including:
- Delayed hardware interrupt response
- Multiple spurious interrupt triggers
Switching back to edge detection for the first interrupt resolves these
issues while maintaining reliable interrupt handling.
Extensive testing across multiple platforms with touch panels from
various vendors confirms this change introduces no regressions.
[jkosina@suse.com: properly capitalize shortlog]
Fixes: 9d8d51735a ("HID: intel-thc-hid: intel-quickspi: Add HIDSPI protocol implementation")
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
There is a new BIOS enhancement that adds the capability to configure the
following two features of I2C subsystem introduced in commit 1ed0b48
("Intel-thc: Introduce max input size control") and commit 3f2a921
("Intel-thc: Introduce interrupt delay control"):
- Max input size control
- Interrupt delay control
As BIOS is used for the configuration of these two features, change driver
data usage to indicate hardware capability, and add corresponding ACPI
configuration support in QuickI2C driver.
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
After driver module is removed and during re-install stage, if there
is continueous user touching on the screen, it is a risk impacting
THC hardware initialization which causes driver installation failure.
This patch enhances this flow by quiescing the external touch
interrupt after driver is removed which keeps THC hardware
ignore external interrupt during this remove and re-install stage.
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Fixes: 66b59bfce6 ("HID: intel-thc-hid: intel-quicki2c: Complete THC QuickI2C driver")
Signed-off-by: Jiri Kosina <jkosina@suse.com>
- support for Wake-on-touch in intel-thc (Even Xu)
- support for "Input max input size control" and "Input interrupt delay"
I2C features in order to improve compatibility of THC devices with
legacy HIDI2C touch devices (Even Xu)
This patch call THC helper functions to enable Wake-on-Touch (WoT)
during driver initialization and disable it when driver is removed.
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Chong Han <chong.han@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch call THC helper functions to enable Wake-on-Touch (WoT)
during driver initialization and disable it when driver is removed.
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Chong Han <chong.han@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Wake-on-Touch (WoT) feature gives system the capability to wake from
sleep state by user touch event, it requires platform providing wake
GPIO through ACPI resource.
Intel UEFI provides a user setting to enable or disable THC device WoT
feature. If it's enabled, UEFI assigns an additional wake GPIO resource
to THC device ACPI configuration, facilitating system wakeup.
This patch provides helper APIs for THC device driver to query wake
GPIO resource, enable WoT feature and unconfigure WoT.
APIs added:
- thc_wot_config(): Query and configure wake-on-touch feature.
- thc_wot_unconfig(): Unconfig wake-on-touch feature.
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Chong Han <chong.han@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
During customer board enabling, it was found: some touch devices
prepared reset response, but either forgot sending interrupt or
THC missed reset interrupt because of timing issue. THC QuickI2C
driver depends on interrupt to read reset response, in this case,
it will cause driver waiting timeout.
This patch enhances the flow by adding manually reset response
reading after waiting for reset interrupt timeout.
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Chong Han <chong.han@intel.com>
Fixes: 66b59bfce6 ("HID: intel-thc-hid: intel-quicki2c: Complete THC QuickI2C driver")
Signed-off-by: Jiri Kosina <jkosina@suse.com>
On Panther Lake platform (PTL), THC hardware introduces two new features
for I2C subsystem:
- Input max input size control
- Input interrupt delay
This patch adds above new advanced features into QuickI2C driver, and
enables max input size control feature on PTL to improve QuickI2C
driver compatibility.
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Chong Han <chong.han@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch defines driver data structure and adds it into QuickI2C
device structure. Changes PCI ID table to use PCI_DEVICE_DATA() to
pass platform specific driver data into driver, let driver has
capability to enable different hardware features according to
different platform driver data.
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch adds support for a new feature, named "Interrupt Delay",
allowing driver to set a specific delay time for next interrupt
detection. It gives driver a capability to control THC waiting time for
the next interrupt, to reduce the likelihood of spurious readings.
APIs added:
- thc_i2c_set_rx_int_delay(): Set I2C Rx input interrupt delay value
- thc_i2c_rx_int_delay_enable(): Enable or disable I2C Rx interrupt delay
As this interrupt delay feature is only applicable to RxDMA and must
remain disabled during SWDMA operations, it also involves a change
in SWDMA code to record the max input size control feature state
before SWDMA and restore the state after SWDMA.
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Chong Han <chong.han@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch adds support for a new feature, named "Max Input Size
Control", allowing driver to set a maximum input size for RxDMA. This
enhancement aims to prevent RxDMA buffer overruns caused by data
corruption on the I2C bus, thereby improving overall system stability.
APIs added:
- thc_i2c_set_rx_max_size(): Set the maximum input size for I2C RxDMA.
- thc_i2c_rx_max_size_enable(): Enable or disable the max input size
control.
As this max input size control feature is only applicable to RxDMA
and must remain disabled during SWDMA operations, it also involves
a change in SWDMA code to record the max input size control feature
state before SWDMA and restore the state after SWDMA.
Signed-off-by: Even Xu <even.xu@intel.com>
Tested-by: Chong Han <chong.han@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Align capitalization of the first characters for THC structure
definition comments in header files.
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Convert thc_dma_content structure comments format into kernel doc
format, let it can be included into kernel doc.
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Don't populate the read-only arrays frequency and frequency_div on
the stack at run time, instead make them static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Correct quickspi device state name and change the list order to follow
device state working flow.
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
During S4 retore flow, quickspi device was resetted by driver and state
was changed to RESETTED. It is needed to be change to ENABLED state
after S4 re-initialization finished, otherwise, device will run in wrong
state and HID input data will be dropped.
Signed-off-by: Even Xu <even.xu@intel.com>
Fixes: 6912aaf3fd ("HID: intel-thc-hid: intel-quickspi: Add PM implementation")
Signed-off-by: Jiri Kosina <jkosina@suse.com>
intel-thc-hid reintroduced the already deprecated PCI API functions
pcim_iomap_table(),
pcim_iomap_regions(),
pcim_iounmap_regions(),
none of which should be used anymore.
Furthermore, calling managed (pcim_*) functions in remove() and probe()
for cleanup is not necessary, since the managed functions clean up
automatically.
Replace / remove the deprecated functions.
Fixes: 61bb2714dc ("HID: intel-thc-hid: intel-quicki2c: Add THC QuickI2C driver skeleton")
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
In drivers/hid/, most drivers depend on CONFIG_HID, while a couple of the
drivers in subdirectories instead depend on CONFIG_HID_SUPPORT and use
'select HID'. With the newly added INTEL_THC_HID, this causes a build
warning for a circular dependency:
WARNING: unmet direct dependencies detected for HID
Depends on [m]: HID_SUPPORT [=y] && INPUT [=m]
Selected by [y]:
- INTEL_THC_HID [=y] && HID_SUPPORT [=y] && X86_64 [=y] && PCI [=y] && ACPI [=y]
WARNING: unmet direct dependencies detected for INPUT_FF_MEMLESS
Depends on [m]: INPUT [=m]
Selected by [y]:
- HID_MICROSOFT [=y] && HID_SUPPORT [=y] && HID [=y]
- GREENASIA_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_GREENASIA [=y]
- HID_WIIMOTE [=y] && HID_SUPPORT [=y] && HID [=y] && LEDS_CLASS [=y]
- ZEROPLUS_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_ZEROPLUS [=y]
Selected by [m]:
- HID_ACRUX_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_ACRUX [=m]
- HID_EMS_FF [=m] && HID_SUPPORT [=y] && HID [=y]
- HID_GOOGLE_STADIA_FF [=m] && HID_SUPPORT [=y] && HID [=y]
- PANTHERLORD_FF [=y] && HID_SUPPORT [=y] && HID [=y] && HID_PANTHERLORD [=m]
It's better to be consistent and always use 'depends on HID' for HID
drivers. The notable exception here is USB_KBD/USB_MOUSE, which are
alternative implementations that do not depend on the HID subsystem.
Do this by extending the "if HID" section below, which means that a few
of the duplicate "depends on HID" and "depends on INPUT" statements
can be removed in the process.
Fixes: 1b2d05384c ("HID: intel-thc-hid: Add basic THC driver skeleton")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
