The WA buffer we use to capture context utilization contains GGTT
references. This means its instructions have to be either fixed or
re-emitted during VF post-migration recovery.
This patch adds re-emitting content of the utilization WA BB during
the recovery.
The way we write to vram requires scratch buffer to be used before
the whole block is memcopied. We are re-using a scratch buffer
introduced in earlier part of the recovery. This is not a performance
optimization, but a necessity to avoid creating dependencies between
locks.
v2: Notable rebase after "Prepare WA BB setup for more users" patch
v3: Added error propagation
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michal Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20250802031045.1127138-8-tomasz.lis@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
All contexts require an update of state data, as the data includes
GGTT references to memirq-related buffers.
Default contexts need these references updated as well, because they
are not refreshed when a new context is created from them.
The way we write to vram requires scratch buffer to be used
before the whole block is memcopied. Since using kalloc() within
specific recovery functions would lead to unintended relations
between locks, we are allocating the buffer earlier, before
any locks are taken. The same buffer will be used for other steps
of the recovery.
v2: Update addresses by xe_lrc_write_ctx_reg() rather than
set_memory_based_intr()
v3: Renamed parameter, reordered parameters in some functs
v4: Check if have MEMIRQ, move `xe_gt*` funct to proper file
v5: Revert back to requiring scratch buffer, but allocate it
earlier this time
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Acked-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Reviewed-by: Michal Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20250802031045.1127138-6-tomasz.lis@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Resetting GuC during recovery could interfere with the recovery
process. Such reset might be also triggered without justification,
due to migration taking time, rather than due to the workload not
progressing.
Doing GuC reset during the recovery would cause exit of RESFIX state,
and therefore continuation of GuC work while fixups are still being
applied. To avoid that, reset needs to be blocked during the recovery.
This patch blocks the reset during recovery. Reset request in that
time range will be stalled, and unblocked only after GuC goes out
of RESFIX state.
In case a reset procedure already started while the recovery is
triggered, there isn't much we can do - we cannot wait for it to
finish as it involves waiting for hardware, and we can't be sure
at which exact point of the reset procedure the GPU got switched.
Therefore, the rare cases where migration happens while reset is
in progress, are still dangerous. Resets are not a part of the
standard flow, and cause unfinished workloads - that will happen
during the reset interrupted by migration as well, so it doesn't
diverge that much from what normally happens during such resets.
v2: Introduce a new atomic for reset blocking, as we cannot reuse
`stopped` atomic (that could lead to losing a workload).
v3: Switched atomic functs to ones which include proper barriers
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michal Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20250802031045.1127138-4-tomasz.lis@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Non-virtualized resources require fixups after SRIOV VF migration.
Caching GGTT references rather than re-computing them from the
underlying Buffer Object is something we want to avoid, as such
code would require additional fixup step and additional locking
around all the places where the address is accessed.
This change removes the cached GPU address from the Sub-Allocation
Manager, and introduces a function which recomputes and returns
the address instead.
v2: renamed xe_sa_manager_gpu_addr(), added kerneldoc
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20250802031045.1127138-2-tomasz.lis@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
It has been observed that during `xe_display_pm_suspend()` execution,
an HPD interrupt can still be triggered, resulting in `dig_port_work`
being scheduled. The issue arises when this work executes after
`xe_display_pm_suspend_late()`, by which time the display is fully
suspended.
This can lead to errors such as "DC state mismatch", as the dig_port
work accesses display resources that are no longer available or
powered.
To address this, introduce 'intel_encoder_block_all_hpds' and
'intel_encoder_unblock_all_hpds' functions, which iterate over all
encoders and block/unblock HPD respectively.
These are used to:
- Block HPD IRQs before calling 'intel_hpd_cancel_work' in suspend
and shutdown
- Unblock HPD IRQs after 'intel_hpd_init' in resume
This will prevent 'dig_port_work' being scheduled during display
suspend.
Continuation of previous patch discussion:
https://patchwork.freedesktop.org/patch/663964/
Changes in v2:
- Add 'intel_encoder_block_all_hpds' to 'xe_display_pm_shutdown'.(Imre
Deak)
- Add 'intel_hpd_cancel_work' to 'xe_display_fini_early' to cancel
any HPD pending work at late driver removal. (Imre Deak)
Changes in v3:
- Move 'intel_encoder_block_all_hpds' after intel_dp_mst_suspend
in 'xe_display_pm_shutdown'.(Imre Deak)
Signed-off-by: Dibin Moolakadan Subrahmanian <dibin.moolakadan.subrahmanian@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250724083928.2298199-1-dibin.moolakadan.subrahmanian@intel.com
Seems we missed one drm-misc-next pull-request in drm-misc-next-fixes.
This is required to pull in 5d156a9c3d ("drm/bridge: Pass down
connector to drm bridge detect hook") and update its docs.
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Use recommended values as per wa_14021694213 to compare with the
calculated value and choose minimum of them.
v2: corrected checkpatch warning and retain the restriction for
min_hblank (Jani)
v3: use calculated value to compare with recomended value and choose
minimum of them (Imre)
v4: As driver supported min bpc is 8, omit the condition check for
bpc6 with ycbcr420. Added a note for the same (Imre)
v5: Add a warn for the unexpected case of 6bpc + uhbr + ycbcr420
v6: Reworded the comments and check fo anything < compressed bpp 8(Imre)
v7: Fix checkpatch warning. (Ankit)
Bspec: 74379
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250730-min_hblank-v7-1-179360220ced@intel.com
Pull non-MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "squashfs: Remove page->mapping references" (Matthew Wilcox) gets
us closer to being able to remove page->mapping
- "relayfs: misc changes" (Jason Xing) does some maintenance and
minor feature addition work in relayfs
- "kdump: crashkernel reservation from CMA" (Jiri Bohac) switches
us from static preallocation of the kdump crashkernel's working
memory over to dynamic allocation. So the difficulty of a-priori
estimation of the second kernel's needs is removed and the first
kernel obtains extra memory
- "generalize panic_print's dump function to be used by other
kernel parts" (Feng Tang) implements some consolidation and
rationalization of the various ways in which a failing kernel
splats information at the operator
* tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (80 commits)
tools/getdelays: add backward compatibility for taskstats version
kho: add test for kexec handover
delaytop: enhance error logging and add PSI feature description
samples: Kconfig: fix spelling mistake "instancess" -> "instances"
fat: fix too many log in fat_chain_add()
scripts/spelling.txt: add notifer||notifier to spelling.txt
xen/xenbus: fix typo "notifer"
net: mvneta: fix typo "notifer"
drm/xe: fix typo "notifer"
cxl: mce: fix typo "notifer"
KVM: x86: fix typo "notifer"
MAINTAINERS: add maintainers for delaytop
ucount: use atomic_long_try_cmpxchg() in atomic_long_inc_below()
ucount: fix atomic_long_inc_below() argument type
kexec: enable CMA based contiguous allocation
stackdepot: make max number of pools boot-time configurable
lib/xxhash: remove unused functions
init/Kconfig: restore CONFIG_BROKEN help text
lib/raid6: update recov_rvv.c zero page usage
docs: update docs after introducing delaytop
...
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Enable a set of Clippy lints: 'ptr_as_ptr', 'ptr_cast_constness',
'as_ptr_cast_mut', 'as_underscore', 'cast_lossless' and
'ref_as_ptr'
These are intended to avoid type casts with the 'as' operator,
which are quite powerful, into restricted variants that are less
powerful and thus should help to avoid mistakes
- Remove the 'author' key now that most instances were moved to the
plural one in the previous cycle
'kernel' crate:
- New 'bug' module: add 'warn_on!' macro which reuses the existing
'BUG'/'WARN' infrastructure, i.e. it respects the usual sysctls and
kernel parameters:
warn_on!(value == 42);
To avoid duplicating the assembly code, the same strategy is
followed as for the static branch code in order to share the
assembly between both C and Rust
This required a few rearrangements on C arch headers -- the
existing C macros should still generate the same outputs, thus no
functional change expected there
- 'workqueue' module: add delayed work items, including a
'DelayedWork' struct, a 'impl_has_delayed_work!' macro and an
'enqueue_delayed' method, e.g.:
/// Enqueue the struct for execution on the system workqueue,
/// where its value will be printed 42 jiffies later.
fn print_later(value: Arc<MyStruct>) {
let _ = workqueue::system().enqueue_delayed(value, 42);
}
- New 'bits' module: add support for 'bit' and 'genmask' functions,
with runtime- and compile-time variants, e.g.:
static_assert!(0b00010000 == bit_u8(4));
static_assert!(0b00011110 == genmask_u8(1..=4));
assert!(checked_bit_u32(u32::BITS).is_none());
- 'uaccess' module: add 'UserSliceReader::strcpy_into_buf', which
reads NUL-terminated strings from userspace into a '&CStr'
Introduce 'UserPtr' newtype, similar in purpose to '__user' in C,
to minimize mistakes handling userspace pointers, including mixing
them up with integers and leaking them via the 'Debug' trait. Add
it to the prelude, too
- Start preparations for the replacement of our custom 'CStr' type
with the analogous type in the 'core' standard library. This will
take place across several cycles to make it easier. For this one,
it includes a new 'fmt' module, using upstream method names and
some other cleanups
Replace 'fmt!' with a re-export, which helps Clippy lint properly,
and clean up the found 'uninlined-format-args' instances
- 'dma' module:
- Clarify wording and be consistent in 'coherent' nomenclature
- Convert the 'read!()' and 'write!()' macros to return a 'Result'
- Add 'as_slice()', 'write()' methods in 'CoherentAllocation'
- Expose 'count()' and 'size()' in 'CoherentAllocation' and add
the corresponding type invariants
- Implement 'CoherentAllocation::dma_handle_with_offset()'
- 'time' module:
- Make 'Instant' generic over clock source. This allows the
compiler to assert that arithmetic expressions involving the
'Instant' use 'Instants' based on the same clock source
- Make 'HrTimer' generic over the timer mode. 'HrTimer' timers
take a 'Duration' or an 'Instant' when setting the expiry time,
depending on the timer mode. With this change, the compiler can
check the type matches the timer mode
- Add an abstraction for 'fsleep'. 'fsleep' is a flexible sleep
function that will select an appropriate sleep method depending
on the requested sleep time
- Avoid 64-bit divisions on 32-bit hardware when calculating
timestamps
- Seal the 'HrTimerMode' trait. This prevents users of the
'HrTimerMode' from implementing the trait on their own types
- Pass the correct timer mode ID to 'hrtimer_start_range_ns()'
- 'list' module: remove 'OFFSET' constants, allowing to remove
pointer arithmetic; now 'impl_list_item!' invokes
'impl_has_list_links!' or 'impl_has_list_links_self_ptr!'. Other
simplifications too
- 'types' module: remove 'ForeignOwnable::PointedTo' in favor of a
constant, which avoids exposing the type of the opaque pointer, and
require 'into_foreign' to return non-null
Remove the 'Either<L, R>' type as well. It is unused, and we want
to encourage the use of custom enums for concrete use cases
- 'sync' module: implement 'Borrow' and 'BorrowMut' for 'Arc' types
to allow them to be used in generic APIs
- 'alloc' module: implement 'Borrow' and 'BorrowMut' for 'Box<T, A>';
and 'Borrow', 'BorrowMut' and 'Default' for 'Vec<T, A>'
- 'Opaque' type: add 'cast_from' method to perform a restricted cast
that cannot change the inner type and use it in callers of
'container_of!'. Rename 'raw_get' to 'cast_into' to match it
- 'rbtree' module: add 'is_empty' method
- 'sync' module: new 'aref' submodule to hold 'AlwaysRefCounted' and
'ARef', which are moved from the too general 'types' module which
we want to reduce or eventually remove. Also fix a safety comment
in 'static_lock_class'
'pin-init' crate:
- Add 'impl<T, E> [Pin]Init<T, E> for Result<T, E>', so results are
now (pin-)initializers
- Add 'Zeroable::init_zeroed()' that delegates to 'init_zeroed()'
- New 'zeroed()', a safe version of 'mem::zeroed()' and also provide
it via 'Zeroable::zeroed()'
- Implement 'Zeroable' for 'Option<&T>', 'Option<&mut T>' and for
'Option<[unsafe] [extern "abi"] fn(...args...) -> ret>' for
'"Rust"' and '"C"' ABIs and up to 20 arguments
- Changed blanket impls of 'Init' and 'PinInit' from 'impl<T, E>
[Pin]Init<T, E> for T' to 'impl<T> [Pin]Init<T> for T'
- Renamed 'zeroed()' to 'init_zeroed()'
- Upstream dev news: improve CI more to deny warnings, use
'--all-targets'. Check the synchronization status of the two
'-next' branches in upstream and the kernel
MAINTAINERS:
- Add Vlastimil Babka, Liam R. Howlett, Uladzislau Rezki and Lorenzo
Stoakes as reviewers (thanks everyone)
And a few other cleanups and improvements"
* tag 'rust-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (76 commits)
rust: Add warn_on macro
arm64/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
riscv/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
x86/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
rust: kernel: move ARef and AlwaysRefCounted to sync::aref
rust: sync: fix safety comment for `static_lock_class`
rust: types: remove `Either<L, R>`
rust: kernel: use `core::ffi::CStr` method names
rust: str: add `CStr` methods matching `core::ffi::CStr`
rust: str: remove unnecessary qualification
rust: use `kernel::{fmt,prelude::fmt!}`
rust: kernel: add `fmt` module
rust: kernel: remove `fmt!`, fix clippy::uninlined-format-args
scripts: rust: emit path candidates in panic message
scripts: rust: replace length checks with match
rust: list: remove nonexistent generic parameter in link
rust: bits: add support for bits/genmask macros
rust: list: remove OFFSET constants
rust: list: add `impl_list_item!` examples
rust: list: use fully qualified path
...
Pull virtio updates from Michael Tsirkin:
- vhost can now support legacy threading if enabled in Kconfig
- vsock memory allocation strategies for large buffers have been
improved, reducing pressure on kmalloc
- vhost now supports the in-order feature. guest bits missed the merge
window.
- fixes, cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (30 commits)
vsock/virtio: Allocate nonlinear SKBs for handling large transmit buffers
vsock/virtio: Rename virtio_vsock_skb_rx_put()
vhost/vsock: Allocate nonlinear SKBs for handling large receive buffers
vsock/virtio: Move SKB allocation lower-bound check to callers
vsock/virtio: Rename virtio_vsock_alloc_skb()
vsock/virtio: Resize receive buffers so that each SKB fits in a 4K page
vsock/virtio: Move length check to callers of virtio_vsock_skb_rx_put()
vsock/virtio: Validate length in packet header before skb_put()
vhost/vsock: Avoid allocating arbitrarily-sized SKBs
vhost_net: basic in_order support
vhost: basic in order support
vhost: fail early when __vhost_add_used() fails
vhost: Reintroduce kthread API and add mode selection
vdpa: Fix IDR memory leak in VDUSE module exit
vdpa/mlx5: Fix release of uninitialized resources on error path
vhost-scsi: Fix check for inline_sg_cnt exceeding preallocated limit
virtio: virtio_dma_buf: fix missing parameter documentation
vhost: Fix typos
vhost: vringh: Remove unused functions
vhost: vringh: Remove unused iotlb functions
...
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Allow built-in drivers, not just modular drivers, to use async
initial probing (Lukas Wunner)
- Support Immediate Readiness even on devices with no PM Capability
(Sean Christopherson)
- Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the
required delay between a reset and sending config requests to a
device (Niklas Cassel)
- Add pci_is_display() to check for "Display" base class and use it
in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello)
- Allow 'isolated PCI functions' (multi-function devices without a
function 0) for LoongArch, similar to s390 and jailhouse (Huacai
Chen)
Power control:
- Add ability to enable optional slot clock for cases where the PCIe
host controller and the slot are supplied by different clocks
(Marek Vasut)
PCIe native device hotplug:
- Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
misinterpreting a config read failure after a device has been
removed (Lukas Wunner)
- Avoid creating a useless PCIe port service device for pciehp if the
slot is handled by the ACPI hotplug driver (Lukas Wunner)
- Ignore ACPI hotplug slots when calculating depth of pciehp hotplug
ports (Lukas Wunner)
Virtualization:
- Save VF resizable BAR state and restore it after reset (Michał
Winiarski)
- Allow IOV resources (VF BARs) to be resized (Michał Winiarski)
- Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size
(Michał Winiarski)
Endpoint framework:
- Add RC-to-EP doorbell support using platform MSI controller,
including a test case (Frank Li)
- Allow BAR assignment via configfs so platforms have flexibility in
determining BAR usage (Jerome Brunet)
Native PCIe controller drivers:
- Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie,
axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to
DT schema format (Rob Herring)
- Use dev_fwnode() instead of of_fwnode_handle() to remove OF
dependency in altera (fixes an unused variable), designware-host,
mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma,
xilinx-nwl (Jiri Slaby, Arnd Bergmann)
- Convert aardvark, altera, brcmstb, designware-host, iproc,
mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx,
xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to
using msi_create_parent_irq_domain() instead; this makes the
interrupt controller per-PCI device, allows dynamic allocation of
vectors after initialization, and allows support of IMS (Nam Cao)
APM X-Gene PCIe controller driver:
- Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug
bits, use device-managed memory allocations, and clean things up
(Marc Zyngier)
- Probe xgene-msi as a standard platform driver rather than a
subsys_initcall (Marc Zyngier)
Broadcom STB PCIe controller driver:
- Add optional DT 'num-lanes' property and if present, use it to
override the Maximum Link Width advertised in Link Capabilities
(Jim Quinlan)
Cadence PCIe controller driver:
- Use PCIe Message routing types from the PCI core rather than
defining private ones (Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)
- Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
(Richard Zhu)
- Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can
trigger doorbel on Endpoint (Frank Li)
- Remove apps_reset (LTSSM_EN) from
imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug
regression on i.MX8MM (Richard Zhu)
- Delay Endpoint link start until configfs 'start' written (Richard
Zhu)
Intel VMD host bridge driver:
- Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)
Qualcomm PCIe controller driver:
- Add DT binding and driver support for SA8255p, which supports ECAM
for Configuration Space access (Mayank Rana)
- Update DT binding and driver to describe PHYs and per-Root Port
resets in a Root Port stanza and deprecate describing them in the
host bridge; this makes it possible to support multiple Root Ports
in the future (Krishna Chaitanya Chundru)
- Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang)
- Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang)
- Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT
bindings (Konrad Dybcio)
- Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue
Zhang)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Rockchip PCIe controller driver:
- Drop unused PCIe Message routing and code definitions (Hans Zhang)
- Remove several unused header includes (Hans Zhang)
- Use standard PCIe config register definitions instead of
rockchip-specific redefinitions (Geraldo Nascimento)
- Set Target Link Speed to 5.0 GT/s before retraining so we have a
chance to train at a higher speed (Geraldo Nascimento)
Rockchip DesignWare PCIe controller driver:
- Prevent race between link training and register update via DBI by
inhibiting link training after hot reset and link down (Wilfred
Mallawa)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Sophgo PCIe controller driver:
- Add DT binding and driver for Sophgo SG2044 PCIe controller driver
in Root Complex mode (Inochi Amaoto)
Synopsys DesignWare PCIe controller driver:
- Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
Ports that support > 5.0 GT/s. Slower Ports still rely on the
not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while
waiting for the Link (Niklas Cassel)"
* tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset
dt-bindings: PCI: Remove 83xx-512x-pci.txt
dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema
dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema
dt-bindings: PCI: Convert apm,xgene-pcie to DT schema
dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema
dt-bindings: PCI: Convert st,spear1340-pcie to DT schema
PCI: Move is_pciehp check out of pciehp_is_native()
PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
selftests: pci_endpoint: Add doorbell test case
misc: pci_endpoint_test: Add doorbell test case
PCI: endpoint: pci-epf-test: Add doorbell test support
PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
PCI: vmd: Switch to msi_create_parent_irq_domain()
PCI: vmd: Convert to lock guards
...
The PF driver might be resumed just to configure VFs, but since
it is doing some asynchronous GuC reconfigurations after fresh
reset, we should wait until all pending works are completed.
This is especially important in case of LMEM provisioning, since
we also need to update the LMTT and send invalidation requests
to all GuCs, which are expected to be already in the VGT mode.
Fixes: 68ae022278 ("drm/xe/pf: Force GuC virtualization mode")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250801142822.180530-3-michal.wajdeczko@intel.com
The global fault counter is no longer used since commit 12578c075f
("drm/msm/gpu: Skip retired submits in recover worker"). However, it's
still needed, as we need to handle cases where a GPU fault occurs after
the faulting process has already ended.
Hence, increment the global fault counter when the submitting process
had already ended. This way, the number of faults returned by
MSM_PARAM_FAULTS will stay consistent.
While here, s/unusuable/unusable.
Fixes: 12578c075f ("drm/msm/gpu: Skip retired submits in recover worker")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Patchwork: https://patchwork.freedesktop.org/patch/664853/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
An atomic counter is not sufficient, as one task could still be in the
process of tearing things down while another task increments the counter
back up to one and begins setup again. The race condition existed since
commit b145c6e65e ("drm/msm: Add support to create a local pagetable")
but got bigger in commit dbbde63c9e ("drm/msm: Add PRR support").
Fixes: dbbde63c9e ("drm/msm: Add PRR support")
Fixes: b145c6e65e ("drm/msm: Add support to create a local pagetable")
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/664433/
Doing devcoredump initializing before GT though look harmless, it leads
to problem during driver unbind. Because of this order, GT/Engine
release functions will be called before xe devcoredump release function
(xe_driver_devcoredump_fini) leading to the following kernel crash[1]
because the devcoredump functions might still use GT/Engine
datastructures after those are freed.
The following crash is observed while running the IGT
xe_wedged@wedged-at-any-timeout. The test forces a wedged state by
submitting a workload which hangs. Then does a unbind/rebind of the
driver to recover from the wedged state.
The hanged workload leads to a devcoredump. The following crash is
noticed when the devcoredump capture races with the driver unbind.
During driver unbind, the release function hw_engine_fini() will be
called which assigns NULL to hwe->gt. But the same data structure is
accessed during the coredump capture in the function
xe_engine_snapshot_print by reading snapshot->hwe->gt.
With this patch, we make sure the devcoredump is stopped before
deinitializing the core driver functions.
[1]:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Workqueue: events_unbound xe_devcoredump_deferred_snap_work [xe]
RIP: 0010:xe_engine_snapshot_print+0x47/0x420 [xe]
Call Trace:
<TASK>
? drm_printf+0x64/0x90
__xe_devcoredump_read+0x23f/0x2d0 [xe]
? __pfx___drm_printfn_coredump+0x10/0x10
? __pfx___drm_puts_coredump+0x10/0x10
xe_devcoredump_deferred_snap_work+0x17a/0x190 [xe]
process_one_work+0x22e/0x6f0
worker_thread+0x1e8/0x3d0
? __pfx_worker_thread+0x10/0x10
kthread+0x11f/0x250
? __pfx_kthread+0x10/0x10
ret_from_fork+0x47/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
v2: Detailed commit description (Rodrigo)
v3: FIXME added (Rodrigo, Stuart)
Fixes: 4209d635a8 ("drm/xe: Remove devcoredump during driver release")
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250731061300.14320-1-balasubramani.vivekanandan@intel.com
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://lore.kernel.org/r/20250801052356.21885-1-balasubramani.vivekanandan@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Pull drm fixes from Dave Airlie:
"Just a bunch of amdgpu and xe fixes.
amdgpu:
- DSC divide by 0 fix
- clang fix
- DC debugfs fix
- Userq fixes
- Avoid extra evict-restore with KFD
- Backlight fix
- Documentation fix
- RAS fix
- Add new kicker handling
- DSC fix for DCN 3.1.4
- PSR fix
- Atomic fix
- DC reset fixes
- DCN 3.0.1 fix
- MMHUB client mapping fix
xe:
- Fix BMG probe on unsupported mailbox command
- Fix OA static checker warning about null gt
- Fix a NULL vs IS_ERR() bug in xe_i2c_register_adapter
- Fix missing unwind goto in GuC/HuC
- Don't register I2C devices if VF
- Clear whole GuC g2h_fence during initialization
- Avoid call kfree for drmm_kzalloc
- Fix pci_dev reference leak on configfs
- SRIOV: Disable CSC support on VF
* tag 'drm-next-2025-08-01' of https://gitlab.freedesktop.org/drm/kernel: (24 commits)
drm/xe/vf: Disable CSC support on VF
drm/amdgpu: update mmhub 4.1.0 client id mappings
drm/amd/display: Allow DCN301 to clear update flags
drm/amd/display: Pass up errors for reset GPU that fails to init HW
drm/amd/display: Only finalize atomic_obj if it was initialized
drm/amd/display: Avoid configuring PSR granularity if PSR-SU not supported
drm/amd/display: Disable dsc_power_gate for dcn314 by default
drm/amdgpu: add kicker fws loading for gfx12/smu14/psp14
drm/amd/amdgpu: fix missing lock for cper.ring->rptr/wptr access
drm/amd/display: Fix misuse of /** to /* in 'dce_i2c_hw.c'
drm/amd/display: fix initial backlight brightness calculation
drm/amdgpu: Avoid extra evict-restore process.
drm/amdgpu: track whether a queue is a kernel queue in amdgpu_mqd_prop
drm/amdgpu: check if hubbub is NULL in debugfs/amdgpu_dm_capabilities
drm/amdgpu: Initialize data to NULL in imu_v12_0_program_rlc_ram()
drm/amd/display: Fix divide by zero when calculating min ODM factor
drm/xe/configfs: Fix pci_dev reference leak
drm/xe/hw_engine_group: Avoid call kfree() for drmm_kzalloc()
drm/xe/guc: Clear whole g2h_fence during initialization
drm/xe/vf: Don't register I2C devices if VF
...
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
