The 'tag' parameter is passed by value and is not actually used after
being incremented, so remove the increment. It's the function that calls
gm200_flcn_pio_imem_wr that is supposed to (and does) increment 'tag'.
Fixes: 0e44c21708 ("drm/nouveau/flcn: new code to load+boot simple HS FWs (VPR scrubber)")
Reviewed-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://lore.kernel.org/r/20250813001004.2986092-2-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
We need override certain link rates in favour of the next available
higher link rate. The Link rates that need to be overridden are
indicated by a mask in VBT. To make sure these modes are skipped we
don't add them in them in the sink rates array.
--v2
-Update the link rates after we have a final set of link rates [Ankit]
-Break this patch up [Ankit]
-Optimize the assingment during loop [Ankit]
--v3
-Add protection against broken VBTs [Jani]
--v4
-Fix build errors
-Create a seprate function to check if edp data override is selected
and using the correct vbt
--v5
-Use correct number to check the num of edp rates [Ankit]
--v6
-No seprate function check if vbt is broken in the reject rate function
[Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250821042653.269227-4-suraj.kandpal@intel.com
Add a function that helps identify if the rate provided needs to
be overridden. For this we need a function that compares the rate
provided and bitmask of rates provided in VBT.
--v2
-Rename functions [Jani]
-Return the mask instead of parsing it in function [Jani]
-Move the declaration in header [Jani]
--v3
-Change function name to depict what the function does [Ankit]
--v4
-Lets not use hweight [Ankit]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250821042653.269227-3-suraj.kandpal@intel.com
Add edp_data_rate_override field VBT which gives us a mask
of rates which needs to be skipped in favour of
subsequent higher rate.
--v2
-Rename vbt field [Jani]
-Fix comment to 263+ [Jani]
-Use BIT_U32 [Jani]
-Fix the bits assignment in vbt [Jani]
--v3
-Add a mask which represents all link rates [Ankit]
Bspec: 20124
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250821042653.269227-2-suraj.kandpal@intel.com
At least for panel-bridges, the atomic_enable call is defined as being
called right after the preceding element in the display pipe is enabled.
It is also stated that "The bridge can assume that the display pipe (i.e.
clocks and timing signals) feeding it is running when this callback is
called"
This means the DSI controller driving this display would have already
switched over to video-mode from command mode and thus dcs functions
should not be called anymore at this point.
This caused a non-working display for me, when trying to enable
the rk3576 dsi controller using a display using this controller.
Therefore move the display_on/off calls the more appropriate
prepare/unprepare callbacks.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250707164906.1445288-3-heiko@sntech.de
Requirement for PSMI capture is to have a physically contiguous buffer.
All the needed configuration is done by the userspace tool directly to
the GPU via mmio access.
This interface only support allocating from VRAM regions. For integrated
devices, the PSMI buffer is in SYSTEM memory and should be allocated by
userspace using hugetlbfs.
Here we add the ability to allocate a region of physically contiguous
memory by writing to debugfs file (listed below). For multi-tile devices,
the capture tool requires ability to allocate a capture buffer per tile
(VRAM region) and so user can specify a region_mask. The tool then
can mmap the buffers via direct mmap of the PCIBAR via sysfs.
To support the capture tool, 3 new debugfs entries are added:
psmi_capture_addr - physical address per VRAM region's capture buffer
psmi_capture_region_mask - select which region(s) to allocate a buffer
psmi_capture_size - size of current capture buffer
Writing psmi_capture_size will allocate new buffer of requested size per
region after freeing any current buffers.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Original-author: Brian Welty <brian.welty@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> # v2
Link: https://lore.kernel.org/r/20250821-psmi-v5-2-34ab7550d3d8@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Commit fd40a63c63 ("drm/atomic: Let drivers decide which planes to
async flip") unintentionally disallowed no-op changes on non-primary
planes that the driver doesn't allow async flips on. This broke async
flips for compositors that disable the cursor plane in every async
atomic commit. To fix that, change drm_atomic_set_property to again
only run atomic_async_check if the plane would actually be changed by
the atomic commit.
Fixes: fd40a63c63 ("drm/atomic: Let drivers decide which planes to async flip")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4263
Signed-off-by: Xaver Hugl <xaver.hugl@kde.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20250822152849.87843-1-xaver.hugl@kde.org
[andrealmeid: fix checkpatch warning]
Signed-off-by: André Almeida <andrealmeid@igalia.com>
There are two registers filled in when reading data from
pcode besides the mailbox itself. Currently, we allow a NULL
value for the second of these two (data1) and assume the first
is defined. However, many of the routines that are calling
this function assume that pcode will ignore the value being
passed in and so leave that first value (data0) defined but
uninitialized. To be safe, make sure this value is always
initialized to something (0 generally) in the event pcode
behavior changes and starts using this value.
v2: Fix sob/author
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250819201054.393220-1-stuart.summers@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Current dma-buf vmap semantics require that the mapped buffer remains
in place until the corresponding vunmap has completed.
For GEM-SHMEM, this used to be guaranteed by a pin operation while creating
an S/G table in import. GEM-SHMEN can now import dma-buf objects without
creating the S/G table, so the pin is missing. Leads to page-fault errors,
such as the one shown below.
[ 102.101726] BUG: unable to handle page fault for address: ffffc90127000000
[...]
[ 102.157102] RIP: 0010:udl_compress_hline16+0x219/0x940 [udl]
[...]
[ 102.243250] Call Trace:
[ 102.245695] <TASK>
[ 102.2477V95] ? validate_chain+0x24e/0x5e0
[ 102.251805] ? __lock_acquire+0x568/0xae0
[ 102.255807] udl_render_hline+0x165/0x341 [udl]
[ 102.260338] ? __pfx_udl_render_hline+0x10/0x10 [udl]
[ 102.265379] ? local_clock_noinstr+0xb/0x100
[ 102.269642] ? __lock_release.isra.0+0x16c/0x2e0
[ 102.274246] ? mark_held_locks+0x40/0x70
[ 102.278177] udl_primary_plane_helper_atomic_update+0x43e/0x680 [udl]
[ 102.284606] ? __pfx_udl_primary_plane_helper_atomic_update+0x10/0x10 [udl]
[ 102.291551] ? lockdep_hardirqs_on_prepare.part.0+0x92/0x170
[ 102.297208] ? lockdep_hardirqs_on+0x88/0x130
[ 102.301554] ? _raw_spin_unlock_irq+0x24/0x50
[ 102.305901] ? wait_for_completion_timeout+0x2bb/0x3a0
[ 102.311028] ? drm_atomic_helper_calc_timestamping_constants+0x141/0x200
[ 102.317714] ? drm_atomic_helper_commit_planes+0x3b6/0x1030
[ 102.323279] drm_atomic_helper_commit_planes+0x3b6/0x1030
[ 102.328664] drm_atomic_helper_commit_tail+0x41/0xb0
[ 102.333622] commit_tail+0x204/0x330
[...]
[ 102.529946] ---[ end trace 0000000000000000 ]---
[ 102.651980] RIP: 0010:udl_compress_hline16+0x219/0x940 [udl]
In this stack strace, udl (based on GEM-SHMEM) imported and vmap'ed a
dma-buf from amdgpu. Amdgpu relocated the buffer, thereby invalidating the
mapping.
Provide a custom dma-buf vmap method in amdgpu that pins the object before
mapping it's buffer's pages into kernel address space. Do the opposite in
vunmap.
Note that dma-buf vmap differs from GEM vmap in how it handles relocation.
While dma-buf vmap keeps the buffer in place, GEM vmap requires the caller
to keep the buffer in place. Hence, this fix is in amdgpu's dma-buf code
instead of its GEM code.
A discussion of various approaches to solving the problem is available
at [1].
v3:
- try (GTT | VRAM); drop CPU domain (Christian)
v2:
- only use mapable domains (Christian)
- try pinning to domains in preferred order
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 660cd44659 ("drm/shmem-helper: Import dmabuf without mapping its sg_table")
Reported-by: Thomas Zimmermann <tzimmermann@suse.de>
Closes: https://lore.kernel.org/dri-devel/ba1bdfb8-dbf7-4372-bdcb-df7e0511c702@suse.de/
Cc: Shixiong Ou <oushixiong@kylinos.cn>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://lore.kernel.org/dri-devel/9792c6c3-a2b8-4b2b-b5ba-fba19b153e21@suse.de/ # [1]
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250821064031.39090-1-tzimmermann@suse.de
Falcon DMA transfers are done in 256 bytes increments, and the method
responsible for initiating the transfer checked that the required length
was indeed a multiple of 256. While correct, this also requires callers
to specifically account for this limitation of DMA transfers, and we had
for instance the fwsec code performing a seemingly arbitrary (and
potentially overflowing) upwards alignment of the DMEM load size to
match this requirement.
Let's move that alignment into the loading code itself instead: since it
is working in terms of number of transfers, we can turn this upwards
alignment into a non-overflowing operation, and check that the requested
transfer remains into the limits of the DMA object. This also allows us
to remove a DMA-specific constant in the fwsec code.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250821-falcondma_256b-v2-1-83e8647a24b5@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
At least some panels using the LSB register are not happy with the
unconditional increase of the command buffer to 3 bytes.
With the BOE NE14QDM in my Dell Latitude 7455, the recent patches for
luminance based brightness have introduced a regression: the brightness
range stopped being contiguous and became nonsensical (it probably was
interpreting the last 2 bytes of the buffer and not the first 2).
Change from using a fixed sizeof() to a length variable that's only
set to 3 when luminance is used. Let's leave the default as 2 even for
the single-byte version, since that's how it worked before.
Fixes: f2db78e37f ("drm/dp: Modify drm_edp_backlight_set_level")
Signed-off-by: Val Packett <val@packett.cool>
Tested-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250706204446.8918-1-val@packett.cool
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
