Move these two functions out of line as there is no good reason
to inline them. Also switch to passing a cgroup_subsys_state
instead of doing the conversion in the caller to prepare for making
the blkcg structure private to blk-cgroup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
So far bio is marked as REQ_POLLED if RWF_HIPRI/IOCB_HIPRI is passed
from userspace sync io interface, then block layer tries to poll until
the bio is completed. But the current implementation calls
blk_io_schedule() if bio_poll() returns 0, and this way causes io hang or
timeout easily.
But looks no one reports this kind of issue, which should have been
triggered in normal io poll sanity test or blktests block/007 as
observed by Changhui, that means it is very likely that no one uses it
or no one cares it.
Also after io_uring is invented, io poll for sync dio becomes legacy
interface.
So ignore RWF_HIPRI hint for sync dio.
CC: linux-mm@kvack.org
Cc: linux-xfs@vger.kernel.org
Reported-by: Changhui Zhong <czhong@redhat.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Changhui Zhong <czhong@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220420143110.2679002-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 0006707723. It has a
couple problems:
* bio_issue_time() is stored in bio->bi_issue truncated to 51 bits. This
overflows in slightly over 26 days. Setting rq->io_start_time_ns with it
means that io duration calculation would yield >26days after 26 days of
uptime. This, for example, confuses kyber making it cause high IO
latencies.
* rq->io_start_time_ns should record the time that the IO is issued to the
device so that on-device latency can be measured. However,
bio_issue_time() is set before the bio goes through the rq-qos controllers
(wbt, iolatency, iocost), so when the bio gets throttled in any of the
mechanisms, the measured latencies make no sense - on-device latencies end
up higher than request-alloc-to-completion latencies.
We'll need a smarter way to avoid calling ktime_get_ns() repeatedly
back-to-back. For now, let's revert the commit.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v5.16+
Link: https://lore.kernel.org/r/YmmeOLfo5lzc+8yI@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When an iocg is in debt, its inuse weight is owned by debt handling and
should stay at 1. This invariant was broken when determining the amount of
surpluses at the beginning of donation calculation - when an iocg's
hierarchical weight is too low, the iocg is excluded from donation
calculation and its inuse is reset to its active regardless of its
indebtedness, triggering warnings like the following:
WARNING: CPU: 5 PID: 0 at block/blk-iocost.c:1416 iocg_kick_waitq+0x392/0x3a0
...
RIP: 0010:iocg_kick_waitq+0x392/0x3a0
Code: 00 00 be ff ff ff ff 48 89 4d a8 e8 98 b2 70 00 48 8b 4d a8 85 c0 0f 85 4a fe ff ff 0f 0b e9 43 fe ff ff 0f 0b e9 4d fe ff ff <0f> 0b e9 50 fe ff ff e8 a2 ae 70 00 66 90 0f 1f 44 00 00 55 48 89
RSP: 0018:ffffc90000200d08 EFLAGS: 00010016
...
<IRQ>
ioc_timer_fn+0x2e0/0x1470
call_timer_fn+0xa1/0x2c0
...
As this happens only when an iocg's hierarchical weight is negligible, its
impact likely is limited to triggering the warnings. Fix it by skipping
resetting inuse of under-weighted debtors.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Rik van Riel <riel@surriel.com>
Fixes: c421a3eb2e ("blk-iocost: revamp debt handling")
Cc: stable@vger.kernel.org # v5.10+
Link: https://lore.kernel.org/r/YmjODd4aif9BzFuO@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Get rid of the following redundant assignments:
- to a variable r_cols from function ldm_parse_cmp3
- to variables r_id1 and r_id2 from functions ldm_parse_dgr3 and ldm_parse_dgr4
- to a variable r_index from function ldm_parse_prt3
that end up in values not being read until the end of function.
Reported by clang-tidy [deadcode.DeadStores]
Signed-off-by: Michal Orzel <michalorzel.eng@gmail.com>
Link: https://lore.kernel.org/r/20220423113811.13335-5-michalorzel.eng@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All manipulation of bd_openers is under disk->open_mutex and will remain
so for the foreseeable future. But at least one place reads it without
the lock (blkdev_get) and there are more to be added. So make sure the
compiler does not do turn the increments and decrements into non-atomic
sequences by using an atomic_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220330052917.2566582-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Export IO accounting interfaces in terms of block_device now that
gendisk has become more internal to block core.
Rename __part_{start,end}_io_acct's first argument from part to bdev.
Rename __part_{start,end}_io_acct to bdev_{start,end}_io_acct and
export them. Remove disk_{start,end}_io_acct and update caller (zram)
to use bdev_{start,end}_io_acct.
DM can now be updated to use bdev_{start,end}_io_acct.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20220418022733.56168-2-snitzer@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bios queued into BFQ IO scheduler can be associated with a cgroup that
was already offlined. This may then cause insertion of this bfq_group
into a service tree. But this bfq_group will get freed as soon as last
bio associated with it is completed leading to use after free issues for
service tree users. Fix the problem by making sure we always operate on
online bfq_group. If the bfq_group associated with the bio is not
online, we pick the first online parent.
CC: stable@vger.kernel.org
Fixes: e21b7a0b98 ("block, bfq: add full hierarchical scheduling and cgroups support")
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-9-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
BFQ usage of __bio_blkcg() is a relict from the past. Furthermore if bio
would not be associated with any blkcg, the usage of __bio_blkcg() in
BFQ is prone to races with the task being migrated between cgroups as
__bio_blkcg() calls at different places could return different blkcgs.
Convert BFQ to the new situation where bio->bi_blkg is initialized in
bio_set_dev() and thus practically always valid. This allows us to save
blkcg_gq lookup and noticeably simplify the code.
CC: stable@vger.kernel.org
Fixes: 0fe061b9f0 ("blkcg: fix ref count issue with bio_blkcg() using task_css")
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-8-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Track whether bfq_group is still online. We cannot rely on
blkcg_gq->online because that gets cleared only after all policies are
offlined and we need something that gets updated already under
bfqd->lock when we are cleaning up our bfq_group to be able to guarantee
that when we see online bfq_group, it will stay online while we are
holding bfqd->lock lock.
CC: stable@vger.kernel.org
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-7-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We call bfq_init_rq() from request merging functions where requests we
get should have already gone through bfq_init_rq() during insert and
anyway we want to do anything only if the request is already tracked by
BFQ. So replace calls to bfq_init_rq() with RQ_BFQQ() instead to simply
skip requests untracked by BFQ. We move bfq_init_rq() call in
bfq_insert_request() a bit earlier to cover request merging and thus
can transfer FIFO position in case of a merge.
CC: stable@vger.kernel.org
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-6-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the process is migrated to a different cgroup (or in case of
writeback just starts submitting bios associated with a different
cgroup) bfq_merge_bio() can operate with stale cgroup information in
bic. Thus the bio can be merged to a request from a different cgroup or
it can result in merging of bfqqs for different cgroups or bfqqs of
already dead cgroups and causing possible use-after-free issues. Fix the
problem by updating cgroup information in bfq_merge_bio().
CC: stable@vger.kernel.org
Fixes: e21b7a0b98 ("block, bfq: add full hierarchical scheduling and cgroups support")
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-4-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When bfqq is shared by multiple processes it can happen that one of the
processes gets moved to a different cgroup (or just starts submitting IO
for different cgroup). In case that happens we need to split the merged
bfqq as otherwise we will have IO for multiple cgroups in one bfqq and
we will just account IO time to wrong entities etc.
Similarly if the bfqq is scheduled to merge with another bfqq but the
merge didn't happen yet, cancel the merge as it need not be valid
anymore.
CC: stable@vger.kernel.org
Fixes: e21b7a0b98 ("block, bfq: add full hierarchical scheduling and cgroups support")
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-3-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It can happen that the parent of a bfqq changes between the moment we
decide two queues are worth to merge (and set bic->stable_merge_bfqq)
and the moment bfq_setup_merge() is called. This can happen e.g. because
the process submitted IO for a different cgroup and thus bfqq got
reparented. It can even happen that the bfqq we are merging with has
parent cgroup that is already offline and going to be destroyed in which
case the merge can lead to use-after-free issues such as:
BUG: KASAN: use-after-free in __bfq_deactivate_entity+0x9cb/0xa50
Read of size 8 at addr ffff88800693c0c0 by task runc:[2:INIT]/10544
CPU: 0 PID: 10544 Comm: runc:[2:INIT] Tainted: G E 5.15.2-0.g5fb85fd-default #1 openSUSE Tumbleweed (unreleased) f1f3b891c72369aebecd2e43e4641a6358867c70
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x46/0x5a
print_address_description.constprop.0+0x1f/0x140
? __bfq_deactivate_entity+0x9cb/0xa50
kasan_report.cold+0x7f/0x11b
? __bfq_deactivate_entity+0x9cb/0xa50
__bfq_deactivate_entity+0x9cb/0xa50
? update_curr+0x32f/0x5d0
bfq_deactivate_entity+0xa0/0x1d0
bfq_del_bfqq_busy+0x28a/0x420
? resched_curr+0x116/0x1d0
? bfq_requeue_bfqq+0x70/0x70
? check_preempt_wakeup+0x52b/0xbc0
__bfq_bfqq_expire+0x1a2/0x270
bfq_bfqq_expire+0xd16/0x2160
? try_to_wake_up+0x4ee/0x1260
? bfq_end_wr_async_queues+0xe0/0xe0
? _raw_write_unlock_bh+0x60/0x60
? _raw_spin_lock_irq+0x81/0xe0
bfq_idle_slice_timer+0x109/0x280
? bfq_dispatch_request+0x4870/0x4870
__hrtimer_run_queues+0x37d/0x700
? enqueue_hrtimer+0x1b0/0x1b0
? kvm_clock_get_cycles+0xd/0x10
? ktime_get_update_offsets_now+0x6f/0x280
hrtimer_interrupt+0x2c8/0x740
Fix the problem by checking that the parent of the two bfqqs we are
merging in bfq_setup_merge() is the same.
Link: https://lore.kernel.org/linux-block/20211125172809.GC19572@quack2.suse.cz/
CC: stable@vger.kernel.org
Fixes: 430a67f9d6 ("block, bfq: merge bursts of newly-created queues")
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-2-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Refine per-cpu bio alloc cache interfaces so that DM and other block
drivers can properly create and use the cache:
DM uses bioset_init_from_src() to do its final bioset initialization,
so must update bioset_init_from_src() to set BIOSET_PERCPU_CACHE if
%src bioset has a cache.
Also move bio_clear_polled() to include/linux/bio.h to allow users
outside of block core.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220324203526.62306-3-snitzer@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the BIO_PERCPU_CACHE bio-internal flag with a REQ_ALLOC_CACHE
one that can be passed to bio_alloc / bio_alloc_bioset, and implement
the percpu cache allocation logic in a helper called from
bio_alloc_bioset. This allows any bio_alloc_bioset user to use the
percpu caches instead of having the functionality tied to struct kiocb.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
[hch: refactored a bit]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220324203526.62306-2-snitzer@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull block fixes from Jens Axboe:
"Either fixes or a few additions that got missed in the initial merge
window pull. In detail:
- List iterator fix to avoid leaking value post loop (Jakob)
- One-off fix in minor count (Christophe)
- Fix for a regression in how io priority setting works for an
exiting task (Jiri)
- Fix a regression in this merge window with blkg_free() being called
in an inappropriate context (Ming)
- Misc fixes (Ming, Tom)"
* tag 'for-5.18/block-2022-04-01' of git://git.kernel.dk/linux-block:
blk-wbt: remove wbt_track stub
block: use dedicated list iterator variable
block: Fix the maximum minor value is blk_alloc_ext_minor()
block: restore the old set_task_ioprio() behaviour wrt PF_EXITING
block: avoid calling blkg_free() in atomic context
lib/sbitmap: allocate sb->map via kvzalloc_node
cppcheck returns this warning
[block/blk-wbt.h:104] -> [block/blk-wbt.c:592]:
(warning) Function 'wbt_track' argument order different:
declaration 'rq, flags, ' definition 'rqos, rq, bio'
In commit c1c80384c8 ("block: remove external dependency on wbt_flags")
wbt_track was removed for the real declaration, its stub should
have been as well.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220331185458.3427454-1-trix@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull ptrace cleanups from Eric Biederman:
"This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was around
task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the
semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where anything left in tracehook.h was
some weird strange thing that was difficult to understand"
* tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ptrace: Remove duplicated include in ptrace.c
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
ptrace: Return the signal to continue with from ptrace_stop
ptrace: Move setting/clearing ptrace_message into ptrace_stop
tracehook: Remove tracehook.h
resume_user_mode: Move to resume_user_mode.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Introduce task_work_pending
task_work: Remove unnecessary include from posix_timers.h
ptrace: Remove tracehook_signal_handler
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Move ptrace_report_syscall into ptrace.h
PF_EXITING tasks were silently ignored before the below commits.
Continue doing so. Otherwise python-psutil tests fail:
ERROR: psutil.tests.test_process.TestProcess.test_zombie_process
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/abuild/rpmbuild/BUILD/psutil-5.9.0/build/lib.linux-x86_64-3.9/psutil/_pslinux.py", line 1661, in wrapper
return fun(self, *args, **kwargs)
File "/home/abuild/rpmbuild/BUILD/psutil-5.9.0/build/lib.linux-x86_64-3.9/psutil/_pslinux.py", line 2133, in ionice_set
return cext.proc_ioprio_set(self.pid, ioclass, value)
ProcessLookupError: [Errno 3] No such process
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/home/abuild/rpmbuild/BUILD/psutil-5.9.0/psutil/tests/test_process.py", line 1313, in test_zombie_process
succeed_or_zombie_p_exc(fun)
File "/home/abuild/rpmbuild/BUILD/psutil-5.9.0/psutil/tests/test_process.py", line 1288, in succeed_or_zombie_p_exc
return fun()
File "/home/abuild/rpmbuild/BUILD/psutil-5.9.0/build/lib.linux-x86_64-3.9/psutil/__init__.py", line 792, in ionice
return self._proc.ionice_set(ioclass, value)
File "/home/abuild/rpmbuild/BUILD/psutil-5.9.0/build/lib.linux-x86_64-3.9/psutil/_pslinux.py", line 1665, in wrapper
raise NoSuchProcess(self.pid, self._name)
psutil.NoSuchProcess: process no longer exists (pid=2057)
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Fixes: 5fc11eebb4 (block: open code create_task_io_context in set_task_ioprio)
Fixes: a957b61254 (block: fix error in handling dead task for ioprio setting)
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220328085928.7899-1-jslaby@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull block layer 64-bit data integrity support from Jens Axboe:
"This adds support for 64-bit data integrity in the block layer and in
NVMe"
* tag 'for-5.18/64bit-pi-2022-03-25' of git://git.kernel.dk/linux-block:
crypto: fix crc64 testmgr digest byte order
nvme: add support for enhanced metadata
block: add pi for extended integrity
crypto: add rocksoft 64b crc guard tag framework
lib: add rocksoft model crc64
linux/kernel: introduce lower_48_bits function
asm-generic: introduce be48 unaligned accessors
nvme: allow integrity on extended metadata formats
block: support pi with extended metadata
