Introduces two new sys nodes: allocate_section_hint and
allocate_section_policy. The allocate_section_hint identifies the boundary
between devices, measured in sections; it defaults to the end of the device
for single storage setups, and the end of the first device for multiple
storage setups. The allocate_section_policy determines the write strategy,
with a default value of 0 for normal sequential write strategy. A value of
1 prioritizes writes before the allocate_section_hint, while a value of 2
prioritizes writes after it.
This strategy addresses the issue where, despite F2FS supporting multiple
devices, SOC vendors lack multi-devices support (currently only supporting
zoned devices). As a workaround, multiple storage devices are mapped to a
single dm device. Both this workaround and the F2FS multi-devices solution
may require prioritizing writing to certain devices, such as a device with
better performance or when switching is needed due to performance
degradation near a device's end. For scenarios with more than two devices,
sort them at mount time to utilize this feature.
When using this feature with a single storage device, it has almost no
impact. However, for configurations where multiple storage devices are
mapped to the same dm device using F2FS, utilizing this feature can provide
some optimization benefits. Therefore, I believe it should not be limited
to just multi-devices usage.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Document two Loongson-1 boards:
- loongson,ls1b-demo: a board based on Loongson-1B
- loongson,cq-t300b: a board based on Loongson-1C
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Document MIPS 34Kc device tree bindings. It is used in the Realtek
RTL930x SoC.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cross-merge networking fixes after downstream PR (net-6.17-rc4).
No conflicts.
Adjacent changes:
drivers/net/ethernet/intel/idpf/idpf_txrx.c
02614eee26 ("idpf: do not linearize big TSO packets")
6c4e684802 ("idpf: remove obsolete stashing code")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit 7a4c31ee87 ("arm64: zynqmp: Add support for Xilinx Kria SOM
board") has added support for k26 and kv260 and the commit dbcd27526e
("dt-bindings: soc: xilinx: Add support for KV260 CC") has added support
for KV260 and this is follow up patch for adding description for k24 SOM,
KR260 (robotics platform) and KD240 (driver platform).
The bootflow is the same that's why for more information please take a look
at above commits.
The KD240 kit is based on smaller k24 SOM with only 2GB of memory.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/8ff66d0dc4e0de6f239c25d43a2a96b4224305e8.1752837842.git.michal.simek@amd.com
Pull drm fixes from Dave Airlie:
"Weekly fixes, feels a bit big.
The major piece is msm fixes, then the usual amdgpu/xe along with some
mediatek and nouveau fixes and a tegra revert.
gpuvm:
- fix some typos
xe:
- Fix user-fence race issue
- Couple xe_vm fixes
- Don't trigger rebind on initial dma-buf validation
- Fix a build issue related to basename() posix vs gnu discrepancy
amdgpu:
- pin buffers while vmapping
- UserQ fixes
- Revert CSA fix
- SR-IOV fix
nouveau:
- fix linear modifier
- remove some dead code
msm:
- Core/GPU:
- fix comment doc warning in gpuvm
- fix build with KMS disabled
- fix pgtable setup/teardown race
- global fault counter fix
- various error path fixes
- GPU devcoredump snapshot fixes
- handle in-place VM_BIND remaps to solve turnip vm update race
- skip re-emitting IBs for unusable VMs
- Don't use %pK through printk
- moved display snapshot init earlier, fixing a crash
- DPU:
- Fixed crash in virtual plane checking code
- Fixed mode comparison in virtual plane checking code
- DSI:
- Adjusted width of resulution-related registers
- Fixed locking issue on 14nm PLLs
- UBWC (per Bjorn's ack)
- Added UBWC configuration for several missing platforms (fixing
regression)
mediatek:
- Add error handling for old state CRTC in atomic_disable
- Fix DSI host and panel bridge pre-enable order
- Fix device/node reference count leaks in mtk_drm_get_all_drm_priv
- mtk_hdmi: Fix inverted parameters in some regmap_update_bits calls
tegra:
- revert dma-buf change"
* tag 'drm-fixes-2025-08-29' of https://gitlab.freedesktop.org/drm/kernel: (56 commits)
drm/mediatek: mtk_hdmi: Fix inverted parameters in some regmap_update_bits calls
drm/amdgpu/userq: fix error handling of invalid doorbell
drm/amdgpu: update firmware version checks for user queue support
drm/amd/amdgpu: disable hwmon power1_cap* for gfx 11.0.3 on vf mode
Revert "drm/amdgpu: fix incorrect vm flags to map bo"
drm/amdgpu/gfx12: set MQD as appriopriate for queue types
drm/amdgpu/gfx11: set MQD as appriopriate for queue types
drm/xe: switch to local xbasename() helper
drm/xe: Don't trigger rebind on initial dma-buf validation
drm/xe/vm: Clear the scratch_pt pointer on error
drm/xe/vm: Don't pin the vm_resv during validation
drm/xe/xe_sync: avoid race during ufence signaling
Revert "drm/tegra: Use dma_buf from GEM object instance"
soc: qcom: use no-UBWC config for MSM8956/76
soc: qcom: add configuration for MSM8929
soc: qcom: ubwc: add more missing platforms
soc: qcom: ubwc: use no-uwbc config for MSM8917
drm/msm/dpu: Add a null ptr check for dpu_encoder_needs_modeset
dt-bindings: display/msm: qcom,mdp5: drop lut clock
drm/gpuvm: fix various typos in .c and .h gpuvm file
...
s390 and x86 have required LLVM 15 since
30d17fac6a ("scripts/min-tool-version.sh: raise minimum clang version to 15.0.0 for s390")
7861640aac ("x86/build: Raise the minimum LLVM version to 15.0.0")
respectively. This series bumps the rest of the kernel to 15.0.0 to
match, which allows for a decent number of clean ups.
On the distros front, we will only leave behind Debian Bookworm and
Ubuntu Jammy. In both of those cases, builders / developers can either
use the kernel.org toolchains or https://apt.llvm.org to get newer
versions that will run on those distributions, if they cannot upgrade.
archlinux:latest clang version 20.1.8
debian:oldoldstable-slim Debian clang version 11.0.1-2
debian:oldstable-slim Debian clang version 14.0.6
debian:stable-slim Debian clang version 19.1.7 (3+b1)
debian:testing-slim Debian clang version 19.1.7 (3+b1)
debian:unstable-slim Debian clang version 19.1.7 (3+b2)
fedora:41 clang version 19.1.7 (Fedora 19.1.7-4.fc41)
fedora:latest clang version 20.1.8 (Fedora 20.1.8-3.fc42)
fedora:rawhide clang version 20.1.8 (Fedora 20.1.8-3.fc43)
opensuse/leap:latest clang version 17.0.6
opensuse/tumbleweed:latest clang version 20.1.8
ubuntu:focal clang version 10.0.0-4ubuntu1
ubuntu:jammy Ubuntu clang version 14.0.0-1ubuntu1.1
ubuntu:noble Ubuntu clang version 18.1.3 (1ubuntu1)
ubuntu:latest Ubuntu clang version 18.1.3 (1ubuntu1)
ubuntu:rolling Ubuntu clang version 20.1.2 (0ubuntu1)
ubuntu:devel Ubuntu clang version 20.1.8 (0ubuntu1)
Link: https://lore.kernel.org/r/20250821-bump-min-llvm-ver-15-v2-0-635f3294e5f0@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
s390 and x86 have required LLVM 15 since
30d17fac6a ("scripts/min-tool-version.sh: raise minimum clang version to 15.0.0 for s390")
7861640aac ("x86/build: Raise the minimum LLVM version to 15.0.0")
respectively but most other architectures allow LLVM 13.0.1 or newer. In
accordance with the recent minimum supported version of GCC bump that
happened in
118c40b7b5 ("kbuild: require gcc-8 and binutils-2.30")
do the same for LLVM to 15.0.0.
Of the supported releases of Arch Linux, Debian, Fedora, and OpenSUSE
surveyed in evaluating this bump, this only leaves behind Debian
Bookworm (14.0.6) and Ubuntu Jammy (14.0.0). Debian Trixie has 19.1.7
and Ubuntu Noble has 18.1.3 (so there are viable upgrade paths) or users
can use apt.llvm.org, which provides even newer packages for those
distributions.
Reviewed-by: Kees Cook <kees@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Schier <nsc@kernel.org>
Link: https://lore.kernel.org/r/20250821-bump-min-llvm-ver-15-v2-1-635f3294e5f0@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Current Renesas MSIOF get unknown error when first used.
This patch-set will fixup this issue.
The QiLai implementation of this cache controller uses a cache-sets of
2048, and mandates it in an if/else block - but the definition of the
property only permits 1024. Add 2048 as an option, and deny its use
outside of the QiLai.
Fixes: 51b081cdb9 ("dt-bindings: cache: add QiLai compatible to ax45mp")
Reviewed-by: Ben Zong-You Xie <ben717@andestech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The Peripheral Virtualization Unit (PVU) on the AM65 SoC is capable of
restricting DMA from PCIe devices to specific regions of host memory.
Add the optional property "memory-regions" to point to such regions of
memory when PVU is used.
Since the PVU deals with system physical addresses, utilizing the PVU
with PCIe devices also requires setting up the VMAP registers to map the
Requester ID of the PCIe device to the CBA Virtual ID, which in turn is
mapped to the system physical address. Hence, describe the VMAP
registers which are optional unless the PVU shall be used for PCIe.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Li Hua Qian <huaqian.li@siemens.com>
[mani: Expanded PVU in description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250728023701.116963-3-huaqian.li@siemens.com
access-controllers is an optional property that allows a peripheral to
refer to one or more domain access controller(s).
This property is added when the peripheral is under the STM32 firewall
controller. It allows an accurate representation of the hardware, where
the peripheral is connected to a firewall bus. The firewall can then
check the peripheral accesses before allowing its device to probe.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Link: https://lore.kernel.org/r/20250822-drm-misc-next-v5-4-9c825e28f733@foss.st.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
access-controllers is an optional property that allows a peripheral to
refer to one or more domain access controller(s).
This property is added when the peripheral is under the STM32 firewall
controller. It allows an accurate representation of the hardware, where
the peripheral is connected to a firewall bus. The firewall can then check
the peripheral accesses before allowing its device to probe.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Link: https://lore.kernel.org/r/20250822-drm-misc-next-v5-2-9c825e28f733@foss.st.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
The information present in this file is outdated and doesn't serve any
purpose with the current design of the driver.
Remove the outdated file.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[ Viresh: Rewrite commit log ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The 'target-supply' property is used by some i.MX devicetree files.
Document it to fix the following dt-schema warning:
'target-supply' does not match any of the regexes: '^pinctrl-[0-9]+$'
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
"What is F2FS" is rather a mistitle for the whole f2fs docs, as it
implies the overview section (before "Background and design issues"
section) and the docs covers beyond that: from mount options to
filesystem implementation details.
Retitle and add explicit overview section.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Indent description text so that compression_mode numbered list gets
rendered as such in htmldocs output.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Write hint policy table has two rows which act as section rows: buffered
io and direct io, yet these rows are written as normal rows instead.
Column-span them.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Format compression_algorithm subtable as reST table as it does the
semantic job rather than normal paragraph.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
errors=%s subtable is shown in htmldocs output as long-running paragraph
instead due to missing separator from its previous paragraph. Add it.
Fixes: b62e71be21 ("f2fs: support errors=remount-ro|continue|panic mountoption")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fixed following typos reported by Codespell
1. propogated ==> propagated
aperatures ==> apertures
In Documentation/gpu/amdgpu/debugfs.rst
2. parition ==> partition
In Documentation/gpu/amdgpu/process-isolation.rst
3. conections ==> connections
In Documentation/gpu/amdgpu/display/programming-model-dcn.rst
In addition to above,
Fixed wrong bit-partition naming in gpu/amdgpu/process-isolation.rst
from "fourth" partition to "third" partition.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Rakuram Eswaran <rakuram.e96@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
zcrx currently requires the ring to be set up with fixed 32b CQEs,
allow it to use IORING_SETUP_CQE_MIXED as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Attack vector controls for SSB were missed in the initial attack vector series.
The default mitigation for SSB requires user-space opt-in so it is only
relevant for user->user attacks. Check with attack vector controls when
the command is auto - i.e., no explicit user selection has been done.
Fixes: 2d31d28746 ("x86/bugs: Define attack vectors relevant for each bug")
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250819192200.2003074-5-david.kaplan@amd.com
