Pull drm updates from Dave Airlie:
"cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is
enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a
single allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
drm/amdgpu: update MODULE_PARM_DESC for freesync_video
drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
drm/amd/display: Share dce100_validate_global with DCE6-8
drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
drm/amdgpu: Fix fence signaling race condition in userqueue
amd/amdkfd: enhance kfd process check in switch partition
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
drm/amd/display: Reject modes with too high pixel clock on DCE6-10
drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
drm/amd/display: Only enable common modes for eDP and LVDS
drm/amdgpu: remove the redeclaration of variable i
drm/amdgpu/userq: assign an error code for invalid userq va
drm/amdgpu: revert "rework reserved VMID handling" v2
drm/amdgpu: remove leftover from enforcing isolation by VMID
drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
accel/habanalabs: add Infineon version check
accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
accel/habanalabs: add HL_GET_P_STATE passthrough type
...
Convert megachips-stdpxxxx-ge-b850v3-fw.txt to yaml format.
Additional changes:
- Only keep one example.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add compatible string for Exynos7870 DSIM bridge controller. The
device requires four clock sources, in schema they're named as "bus",
"pll", "byte", and "esc".
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Pull devicetree fixes from Rob Herring:
- Convert altr,uart-1.0 and altr,juart-1.0 to DT schema. These were
applied for nios2, but never sent upstream.
- Fix extra '/' in fsl,ls1028a-reset '$id' path
- Fix warnings in ti,sn65dsi83 schema due to unnecessary $ref.
* tag 'devicetree-fixes-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: serial: Convert altr,uart-1.0 to DT schema
dt-bindings: serial: Convert altr,juart-1.0 to DT schema
dt-bindings: soc: fsl,ls1028a-reset: Drop extra "/" in $id
dt-bindings: drm/bridge: ti-sn65dsi83: drop $ref to fix lvds-vod* warnings
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert all remaining interrupt-controller bindings to DT schema
- Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC
PMC, imx-drm, and ftm-quaddec to DT schema
- Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te,
maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard
- Add top-level constraints for renesas,vsp1 and renesas,fcp
- Add missing constraint in amlogic,pinctrl-a4 'group' nodes
- Adjust the allowed properties for dwc3-xilinx, sony,imx219,
pci-iommu, and renesas,dsi
- Add EcoNet vendor prefix
- Fix the reserved-memory.yaml in fsl,qman-fqd
- Drop obsolete numa.txt and cpu-topology.txt which are schemas in
dtschema now
- Drop Renesas RZ/N1S bindings
- Ensure Arm cpu nodes don't allow undocumented properties. Add all
the properties which are in use and undocumented. Drop the Mediatek
cpufreq binding which is not a binding, but just what DT properties
the driver uses.
- Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU
- Update documentation on defining child nodes with separate schemas
- Add bindings to PSCI MAINTAINERS entry
DT core:
- Add new functions to simplify driver handling of 'memory-region'
properties. Users to be added next cycle.
- Simplify of_dma_set_restricted_buffer() to use
of_for_each_phandle()
- Add missing unlock on error in unittest_data_add()"
* tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (87 commits)
dt-bindings: timer: Add fsl,vf610-pit.yaml
dt-bindings: gpu: mali-bifrost: Add compatible for RZ/G3E SoC
ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card
dt-bindings: arm/cpus: Allow 2 power-domains entries
dt-bindings: usb: dwc3-xilinx: allow dma-coherent
media: dt-bindings: sony,imx219: Allow props from video-interface-devices
dt-bindings: soundwire: qcom: Document v2.1.0 version of IP block
dt-bindings: watchdog: fsl-imx-wdt: add compatible string fsl,ls1021a-wdt
dt-bindings: pinctrl: amlogic,pinctrl-a4: Add missing constraint on allowed 'group' node properties
dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yaml
dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller
dt-bindings: trivial-devices: Add VZ89TE to trivial
media: dt-bindings: renesas,vsp1: add top-level constraints
media: dt-bindings: renesas,fcp: add top-level constraints
dt-bindings: trivial-devices: Add Maxim max30208
dt-bindings: soc: fsl,qman-fqd: Fix reserved-memory.yaml reference
dt-bindings: interrupt-controller: Convert ti,omap-intc-irq to DT schema
dt-bindings: interrupt-controller: Convert ti,omap4-wugen-mpu to DT schema
dt-bindings: interrupt-controller: Convert ti,keystone-irq to DT schema
dt-bindings: interrupt-controller: Convert technologic,ts4800-irqc to DT schema
...
This controller support scalable data lanes from 1 to 4. Add the
'data-lanes' property to configure the number of MIPI display panel lanes
selected for boards.
Change $ref of port@1 from 'port' to 'port-base' and add 'endpoint'
property referencing video-interfaces.yaml. Allow 'data-lanes' values
1, 2, 3, and 4 for port@1.
Fix below CHECK_DTB warnings:
arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtb:
dsi@30a00000: ports:port@1:endpoint: Unevaluated properties are not allowed ('data-lanes' was unexpected)
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20250407150442.2778299-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Pull devicetree updates from Rob Herring:
"DT core:
- Fix ref counting errors in interrupt parsing code
- Allow "nonposted-mmio" property per device and on non-Apple h/w
- Use typed accessors in platform driver code
- Fix mismatch between DT MAX_PHANDLE_ARGS and
NR_FWNODE_REFERENCE_ARGS and increase the maximum number args
- Rework of_resolve_phandles() to use __free() cleanup and fix ref
count error
- Use of_prop_cmp() in a few more places
- Improve make_fit.py script error handling
DT bindings:
- Update DT property ordering rules for properties within groups
(i.e. common suffix)
- Update DT submitting-patches doc to cover sending .dts patches and
SoC maintainer rules on being warning free against linux-next
- Add ti,tps53681, ti,tps53681, Maxim max15301, max15303, and
max20751 to trivial devices
- Add Renesas RZ/V2H(P) and Allwinner H616 support to Arm Mali
Bifrost GPU. Add Samsung exynos7870 support to Arm Mail Midgard.
- Rework qcom,ebi2 and samsung,exynos4210-sram memory controller
bindings to split child node properties. Fix the LAN9115 binding to
use the child node schema so all properties are documented.
- Convert nxp,lpc3220-mic and Altera ECC manager bindings to schema
- Fix some issues with LVDS display panels causing validation
warnings
- Drop some obsolete parts of Xilinx bindings"
* tag 'devicetree-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (48 commits)
scripts/make_fit: Print DT name before libfdt errors
dt-bindings: edac: altera: socfpga: Convert to YAML
dt-bindings: pps: gpio: Correct indentation and style in DTS example
media: dt-bindings: mediatek,vcodec-encoder: Drop assigned-clock properties
of: address: Allow to specify nonposted-mmio per-device
of: address: Expand nonposted-mmio to non-Apple Silicon platforms
docs: dt-bindings: Specify ordering for properties within groups
dt-bindings: gpu: arm,mali-midgard: add exynos7870-mali compatible
of: Move of_prop_val_eq() next to the single user
of/platform: Use typed accessors rather than of_get_property()
dt-bindings: trivial-devices: Add Maxim max15301, max15303, and max20751
dt-bindings: fsi: ibm,p9-scom: Add "ibm,fsi2pib" compatible
dt-bindings: memory-controllers: qcom,ebi2: Enforce child props
dt-bindings: memory-controllers: samsung,exynos4210-srom: Enforce child props
dt-bindings: display: mitsubishi,aa104xd12: Adjust allowed and required properties
dt-bindings: display: mitsubishi,aa104xd12: Allow jeida-18 for data-mapping
dt-bindings: interrupt-controller: Convert nxp,lpc3220-mic.txt to yaml format
docs: process: maintainer-soc-clean-dts: linux-next is decisive
docs: dt: submitting-patches: Document sending DTS patches
of: Align macro MAX_PHANDLE_ARGS with NR_FWNODE_REFERENCE_ARGS
...
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Add Bindings for QCom QCS615 UFS, QCom IPQ5424 DWC3 USB, NXP imx7d
MIPI DSI, QCom SM8750 PDC, QCom MSM8976 SRAM, QCom ipq6018 temp
sensor, QCom QCS8300 Power Domain Controller, QCom QCS615 Power
Domain Controller, QCom QCS615 APSS, QCom QCS615 qfprom, QCom
QCS8300 remoteproc, Mediatek MT6328 PMIC, Allwinner A100 OPP, and
NXP iMX35 GPT
- Convert Altera socfpga-system, raspberrypi,bcm2835-power to DT
schema
- Add Siflower vendor prefix
- Cleanup display, interrupt-controller, and UFS binding examples'
indentation
- Document preferred line wrapping (the same as the rest of the
kernel)
DT Core:
- Add warning when of_property_read_bool() is used on non-boolean
properties
- Restore keeping bootloader DTB when booting with ACPI. Turns out
some x86 platforms relied on that. Shrug.
- Fix of_find_node_opts_by_path() handling of alias+path+options
- Fix resource bounds checking for empty resources
- A bunch of small fixes/cleanups all over from Zijun Hu
- Cleanups in bin_attribute handling"
* tag 'devicetree-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (50 commits)
of: address: Fix empty resource handling in __of_address_resource_bounds()
of/fdt: Restore possibility to use both ACPI and FDT from bootloader
docs: dt-bindings: Document preferred line wrapping
dt-bindings: ufs: Correct indentation and style in DTS example
of: Correct element count for two arrays in API of_parse_phandle_with_args_map()
of: reserved-memory: Warn for missing static reserved memory regions
of: Do not expose of_alias_scan() and correct its comments
dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
dt-bindings: usb: qcom,dwc3: Add IPQ5424 to USB DWC3 bindings
dt-bindings: arm: coresight: Update the pattern of ete node name
of: Warn when of_property_read_bool() is used on non-boolean properties
device property: Split property reading bool and presence test ops
of/fdt: Check fdt_get_mem_rsv() error in early_init_fdt_scan_reserved_mem()
of: reserved-memory: Move an assignment to effective place in __reserved_mem_alloc_size()
of: reserved-memory: Do not make kmemleak ignore freed address
of: reserved-memory: Fix using wrong number of cells to get property 'alignment'
of: Remove a duplicated code block
of: property: Avoiding using uninitialized variable @imaplen in parse_interrupt_map()
of: Correct child specifier used as input of the 2nd nexus node
dt-bindings: interrupt-controller: ti,omap4-wugen-mpu: Add file extension
...
TDP158 is an AC-coupled DVI / HDMI to TMDS level shifting Redriver.
It supports DVI 1.0, HDMI 1.4b and 2.0b.
It supports 4 TMDS channels, HPD, and a DDC interface.
It supports dual power supply rails (1.1V on VDD, 3.3V on VCC)
for power reduction. Several methods of power management are
implemented to reduce overall power consumption.
It supports fixed receiver EQ gain using I2C or pin strap to
compensate for different lengths input cable or board traces.
Features
- AC-coupled TMDS or DisplayPort dual-mode physical layer input
to HDMI 2.0b TMDS physical layer output supporting up to 6Gbps
data rate, compatible with HDMI 2.0b electrical parameters
- DisplayPort dual-mode standard version 1.1
- Programmable fixed receiver equalizer up to 15.5dB
- Global or independent high speed lane control, pre-emphasis
and transmit swing, and slew rate control
- I2C or pin strap programmable
- Configurable as a DisplayPort redriver through I2C
- Full lane swap on main lanes
- Low power consumption (200 mW at 6Gbps, 8 mW in shutdown)
https://www.ti.com/lit/ds/symlink/tdp158.pdf
Like the TFP410, the TDP158 can be set up in 2 different ways:
1) hard-coding its configuration settings using pin-strapping resistors
2) placing it on an I2C bus, and defer set-up until run-time
The mode is selected via pin 8 = I2C_EN
I2C_EN high = I2C Control Mode
I2C_EN low = Pin Strap Mode
On our board, I2C_EN is pulled high.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812-tdp158-v5-1-78684a84ec23@freebox.fr
Document default DP port preemphasis configurable via new DT property
"toshiba,pre-emphasis". This is useful in case the DP link properties
are known and starting link training from preemphasis setting of 0 dB
is not useful. The preemphasis can be set separately for both DP lanes
in range 0=0dB, 1=3.5dB, 2=6dB .
This is an endpoint property, not a port property, because the TC9595
datasheet does mention that the DP might operate in some sort of split
mode, where each DP lane is used to feed one display, so in that case
there might be two endpoints.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708150130.54484-1-marex@denx.de
The device uses a clock lane, and 1 to 4 DSI data lanes. Let's add the
data-lanes property starting at 1 similar to what the other bridge
bindings are doing.
Let's also drop the data-lanes properties in the example for the DSI host
controller to avoid confusion. The configuration of the DSI host depends
on the controller used and is unrelated to the bridge binding.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-3-tony@atomide.com
For a normal operation, the stby GPIO is not needed.
The reset pin is required because once the PPI (PHY protocol interface)
is started, it can only be stopped by asserting the reset pin.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[tony@atomide.com: dropped regulator related changes]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240225062008.33191-2-tony@atomide.com
Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches,
there's a few same-area-changed conflicts (xe and amdgpu mostly) that
are getting a bit too annoying.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull devicetree fixes from Rob Herring:
- Improve devlink dependency parsing for DT graphs
- Fix devlink handling of io-channels dependencies
- Fix PCI addressing in marvell,prestera example
- A few schema fixes for property constraints
- Improve performance of DT unprobed devices kselftest
- Fix regression in DT_SCHEMA_FILES handling
- Fix compile error in unittest for !OF_DYNAMIC
* tag 'devicetree-fixes-for-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: ufs: samsung,exynos-ufs: Add size constraints on "samsung,sysreg"
of: property: Add in-ports/out-ports support to of_graph_get_port_parent()
of: property: Improve finding the supplier of a remote-endpoint property
of: property: Improve finding the consumer of a remote-endpoint property
net: marvell,prestera: Fix example PCI bus addressing
of: unittest: Fix compile in the non-dynamic case
of: property: fix typo in io-channels
dt-bindings: tpm: Drop type from "resets"
dt-bindings: display: nxp,tda998x: Fix 'audio-ports' constraints
dt-bindings: xilinx: replace Piyush Mehta maintainership
kselftest: dt: Stop relying on dirname to improve performance
dt-bindings: don't anchor DT_SCHEMA_FILES to bindings directory
The servers for the @codeaurora domain are long retired and any messages
sent there bounce. Sandeep Panda's email address is no longer valid and
should be repleaced. However Sandeep has left the company and has not
been active sice, therefore it looks like this binding is orphaned.
Doug is listed as the reviewer for this file in MAINTAINERS and has
volunteered to be listed within the file as the binding maintainer.
Therefore replace Sandeep with Doug to make the documentation current.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202202329.4172917-1-quic_jhugo@quicinc.com
The constraints for 'audio-ports' don't match the description. There can
be 1 or 2 DAI entries and each entry is exactly 2 values. Also, the
values' sizes are 32-bits, not 8-bits. Move the size constraints to the
outer dimension (number of DAIs) and add constraints on inner array
values.
Link: https://lore.kernel.org/r/20240122204959.1665970-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Pull devicetree fixes from Rob Herring:
- Fix dt-extract-compatibles for builds with in tree build directory
- Drop Xinlei Lee <xinlei.lee@mediatek.com> bouncing email
- Fix the of_reconfig_get_state_change() return value documentation
- Add missing #power-domain-cells property to QCom MPM
- Fix warnings in i.MX LCDIF and adi,adv7533
* tag 'devicetree-fixes-for-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: display: adi,adv75xx: Document #sound-dai-cells
dt-bindings: lcdif: Properly describe the i.MX23 interrupts
dt-bindings: interrupt-controller: Allow #power-domain-cells
of: dynamic: Fix of_reconfig_get_state_change() return value documentation
dt-bindings: display: mediatek: dsi: remove Xinlei's mail
dt: dt-extract-compatibles: Don't follow symlinks when walking tree
