Two regression fixes here: a fb format regression on nouveau and a 4.16-rc1
regression with on LVDS with one sun4i device. Plus a sun4i and a virtio-gpu
fixes.
* tag 'drm-misc-fixes-2018-02-28' of git://people.freedesktop.org/drm-misc:
virtio-gpu: fix ioctl and expose the fixed status to userspace.
drm/sun4i: Protect the TCON pixel clocks
drm/sun4i: Enable the output on the pins (tcon0)
drm/nouveau: prefer XBGR2101010 for addfb ioctl
- 2 display fixes: audio av_enc_map overflow check, and Cannonlake PLL related register offset.
- 3 gem fixes: Clear for in-fence out-fence, fix for clearing exec_flags on execbuf failure, and add back global seqno to tracepoints that had been removed recently by other fence related patch.
* tag 'drm-intel-fixes-2018-02-28' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Make global seqno known in i915_gem_request_execute tracepoint
drm/i915: Clear the in-use marker on execbuf failure
drm/i915/cnl: Fix PORT_TX_DW5/7 register address
drm/i915/audio: fix check for av_enc_map overflow
drm/i915: Fix rsvd2 mask when out-fence is returned
Pull ARM SoC fixes from Arnd Bergmann:
"This is the first set of bugfixes for ARM SoCs, fixing a couple of
stability problems, mostly on TI OMAP and Rockchips platforms:
- OMAP2 hwmod clocks must be enabled in the correct order
- OMAP3 Wakeup from resume through PRM IRQ was unreliable
- one regression on OMAP5 caused by a kexec fix
- Rockchip ethernet needs some settings for stable operation on
Rock64
- Rockchip based Chrombook Plus needs another clock setting for
stable display suspend/resume
- Rockchip based phyCORE-RK3288 was able to run at an invalid CPU
clock frequency
- Rockchip MMC link was sometimes unreliable
- multiple fixes to avoid crashes in the Broadcom STB DPFE driver
Other minor changes include:
- Devicetree fixes for incorrect hardware description (rockchip,
omap, Gemini, amlogic)
- some MAINTAINER file updates to correct email and git addresses
- some fixes addressing 'make W=1' dtc warnings (broadcom, amlogic,
cavium, qualcomm, hisilicon, zx)
- fixes for LTO-compilation (orion, davinci, clps711x)
- one fix for an incorrect Kconfig errata selection
- a memory leak in the OMAP timer driver
- a kernel data leak in OMAP1 debugfs files"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
MAINTAINERS: update entries for ARM/STM32
ARM: dts: bcm283x: Move arm-pmu out of soc node
ARM: dts: bcm283x: Fix unit address of local_intc
ARM: dts: NSP: Fix amount of RAM on BCM958625HR
ARM: dts: Set D-Link DNS-313 SATA to muxmode 0
ARM: omap2: set CONFIG_LIRC=y in defconfig
ARM: dts: imx6dl: Include correct dtsi file for Engicam i.CoreM6 DualLite/Solo RQS
memory: brcmstb: dpfe: support new way of passing data from the DCPU
memory: brcmstb: dpfe: fix type declaration of variable "ret"
memory: brcmstb: dpfe: properly mask vendor error bits
ARM: BCM: dts: Remove leading 0x and 0s from bindings notation
ARM: orion: fix orion_ge00_switch_board_info initialization
ARM: davinci: mark spi_board_info arrays as const
ARM: clps711x: mark clps711x_compat as const
arm: zx: dts: Remove leading 0x and 0s from bindings notation
arm64: dts: Remove leading 0x and 0s from bindings notation
arm64: dts: cavium: fix PCI bus dtc warnings
MAINTAINERS: ARM: at91: update my email address
soc: imx: gpc: de-register power domains only if initialized
ARM: dts: rockchip: Fix DWMMC clocks
...
Pull RISC-V fix from Palmer Dabbelt:
"This week we have a single fix: replacing smp_mb() with __smp_mb().
We were the only architecture with smp_mb() and it appears to just be
clearly wrong, so I think this is a pretty safe patch for an RC"
* tag 'riscv-for-linus-4.16-rc4_smp_mb' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
riscv/barrier: Define __smp_{mb,rmb,wmb}
On CPU hotunplug the enqueued timers of the unplugged CPU are migrated to a
live CPU. This happens from the control thread which initiated the unplug.
If the CPU on which the control thread runs came out from a longer idle
period then the base clock of that CPU might be stale because the control
thread runs prior to any event which forwards the clock.
In such a case the timers from the unplugged CPU are queued on the live CPU
based on the stale clock which can cause large delays due to increased
granularity of the outer timer wheels which are far away from base:;clock.
But there is a worse problem than that. The following sequence of events
illustrates it:
- CPU0 timer1 is queued expires = 59969 and base->clk = 59131.
The timer is queued at wheel level 2, with resulting expiry time = 60032
(due to level granularity).
- CPU1 enters idle @60007, with next timer expiry @60020.
- CPU0 is hotplugged at @60009
- CPU1 exits idle and runs the control thread which migrates the
timers from CPU0
timer1 is now queued in level 0 for immediate handling in the next
softirq because the requested expiry time 59969 is before CPU1 base->clk
60007
- CPU1 runs code which forwards the base clock which succeeds because the
next expiring timer. which was collected at idle entry time is still set
to 60020.
So it forwards beyond 60007 and therefore misses to expire the migrated
timer1. That timer gets expired when the wheel wraps around again, which
takes between 63 and 630ms depending on the HZ setting.
Address both problems by invoking forward_timer_base() for the control CPUs
timer base. All other places, which might run into a similar problem
(mod_timer()/add_timer_on()) already invoke forward_timer_base() to avoid
that.
[ tglx: Massaged comment and changelog ]
Fixes: a683f390b9 ("timers: Forward the wheel clock whenever possible")
Co-developed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: linux-arm-msm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180118115022.6368-1-clingutla@codeaurora.org
Pull "Broadcom drivers fixes for 4.16" from Florian Fainelli:
This pull request contains Broadcom SoCs drivers fixes for 4.16, please
pull the following:
- Markus provides two minor fixes to the Broadcom STB DPFE driver, one
to properly mask bits, and a second one to use the correct type. The
third commit is a consequence of a newer DFPE firmware which would
unfortunately crash without appropriate kernel changes.
* tag 'arm-soc/for-4.16/drivers-fixes' of https://github.com/Broadcom/stblinux:
memory: brcmstb: dpfe: support new way of passing data from the DCPU
memory: brcmstb: dpfe: fix type declaration of variable "ret"
memory: brcmstb: dpfe: properly mask vendor error bits
Pull "Broadcom devicetree fixes for 4.16" from Florian Fainelli:
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
4.16, please pull the following:
- Mathieu fixes leading 0x and 0's from bindings and Device Tree source
files, he has done this treewide and most of his changes are already in
4.16
- Stefan provides two changes to the BCM283x DTS files in order to fix
DTC warnings
- Florian fixes the amount of RAM on the BCM958625HR reference board to
properly limit to what is initialized by the bootloader
* tag 'arm-soc/for-4.16/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm283x: Move arm-pmu out of soc node
ARM: dts: bcm283x: Fix unit address of local_intc
ARM: dts: NSP: Fix amount of RAM on BCM958625HR
ARM: BCM: dts: Remove leading 0x and 0s from bindings notation
Pull "i.MX fixes for 4.16" from Shawn Guo:
- Fix i.MX GPC driver to remove power domains only when they are
initialized in imx_gpc_probe().
- Fix the broken Engicam i.CoreM6 DualLite/Solo RQS board DT to include
imx6dl.dtsi instead of imx6q.dtsi.
* tag 'imx-fixes-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6dl: Include correct dtsi file for Engicam i.CoreM6 DualLite/Solo RQS
soc: imx: gpc: de-register power domains only if initialized
Pull kselftest fixes from Shuah Khan:
"Fixes for various problems in test output, compile errors, and missing
configs"
* tag 'linux-kselftest-4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: vm: update .gitignore with new test
selftests: memory-hotplug: silence test command echo
selftests/futex: Fix line continuation in Makefile
selftests: memfd: add config fragment for fuse
selftests: pstore: Adding config fragment CONFIG_PSTORE_RAM=m
selftests/android: Fix line continuation in Makefile
selftest/vDSO: fix O=
selftests: sync: missing CFLAGS while compiling
fix:
should do right shift on wb before clearing
cleanups:
1,should memset all wb buffer
2,set max wb number to 128 (total 4KB) is big enough
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
power containment disabled only on Fiji and compute
power profile. It violates PCIe spec and may cause power
supply failed. Enabling it will fix the issue, even the
fix will drop performance of some compute tests.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Emit frame size should match with corresponding function,
uvd_v6_0_enc_ring_emit_vm_flush has 5 amdgpu_ring_write
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
WB_FREE should be put after all engines's hw_fini
done, otherwise the invalid wptr/rptr_addr would still
be used by engines which trigger abnormal bugs.
This fixes couple DMAR reading error in host side for SRIOV
after guest kmd is unloaded.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently all cursor related functions are made to all
pipes that are attached to a particular stream.
This is not applicable to pipes that do not have cursor plane
initialised like underlay.
Hence this patch allows cursor related operations on a pipe
only if ipp in available on that particular pipe.
The check is added to set_cursor_position & set_cursor_attribute.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Pull xfs fixes from Darrick Wong:
- fix some compiler warnings
- fix block reservations for transactions created during log recovery
- fix resource leaks when respecifying mount options
* tag 'xfs-4.16-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix potential memory leak in mount option parsing
xfs: reserve blocks for refcount / rmap log item recovery
xfs: use memset to initialize xfs_scrub_agfl_info
Today the tty0 and hvc0 consoles are added as a preferred consoles for
pv domUs only. As this requires a boot parameter for getting dom0
messages per default, add them for dom0, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
A toolstack may delete the vif frontend and backend xenstore entries
while xen-netfront is in the removal code path. In that case, the
checks for xenbus_read_driver_state would return XenbusStateUnknown, and
xennet_remove would hang indefinitely. This hang prevents system
shutdown.
xennet_remove must be able to handle XenbusStateUnknown, and
netback_changed must also wake up the wake_queue for that state as well.
Fixes: 5b5971df3b ("xen-netfront: remove warning when unloading module")
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Cc: Eduardo Otubo <otubo@redhat.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Current cleanup in the error path of xen_bind_pirq_msi_to_irq is
wrong. First of all there's an off-by-one in the cleanup loop, which
can lead to unbinding wrong IRQs.
Secondly IRQs not bound won't be freed, thus leaking IRQ numbers.
Note that there's no need to differentiate between bound and unbound
IRQs when freeing them, __unbind_from_irq will deal with both of them
correctly.
Fixes: 4892c9b4ad ("xen: add support for MSI message groups")
Reported-by: Hooman Mirhadi <mirhadih@amazon.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Amit Shah <aams@amazon.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Pull NVMe fixes from Keith for 4.16-rc.
* 'for-jens' of git://git.infradead.org/nvme:
nvmet: fix PSDT field check in command format
nvme-multipath: fix sysfs dangerously created links
nvme-pci: Fix nvme queue cleanup if IRQ setup fails
nvmet-loop: use blk_rq_payload_bytes for sgl selection
nvme-rdma: use blk_rq_payload_bytes instead of blk_rq_bytes
nvme-fabrics: don't check for non-NULL module in nvmf_register_transport
Pull dma-mapping fix from Christoph Hellwig:
"A single fix for a memory leak regression in the dma-debug code"
* tag 'dma-mapping-4.16-3' of git://git.infradead.org/users/hch/dma-mapping:
dma-debug: fix memory leak in debug_dma_alloc_coherent
The IPS_NAT_MASK check in 4.12 replaced previous check for nfct_nat()
which was needed to fix a crash in 2.6.36-rc, see
commit 7bcbf81a22 ("ipvs: avoid oops for passive FTP").
But as IPVS does not set the IPS_SRC_NAT and IPS_DST_NAT bits,
checking for IPS_NAT_MASK prevents PASV response to be properly
mangled and blocks the transfer. Remove the check as it is not
needed after 3.12 commit 41d73ec053 ("netfilter: nf_conntrack:
make sequence number adjustments usuable without NAT") which
changes nfct_nat() with nfct_seqadj() and especially after 3.13
commit b25adce160 ("ipvs: correct usage/allocation of seqadj
ext in ipvs").
Thanks to Li Shuang and Florian Westphal for reporting the problem!
Reported-by: Li Shuang <shuali@redhat.com>
Fixes: be7be6e161 ("netfilter: ipvs: fix incorrect conflict resolution")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
As we have option in u-boot to set CPU mask for running linux,
we want to pass information to kernel about CPU cores should
be brought up. So we patch kernel dtb in u-boot to set
possible-cpus property.
This also allows us to have correctly setuped MCIP debug mask.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
As of today we use hardcoded MCIP debug mask, so if we launch
kernel via debugger and kick fever cores than HW has all cpus
hang at the momemt of setup MCIP debug mask.
So update MCIP debug mask when the new cpu came online, instead of
use hardcoded MCIP debug mask.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
In SMP systems, GFRC is used for clocksource. However by default the
counter keeps running even when core is halted (say when debugging via a
JTAG debugger). This confuses Linux timekeeping and triggers flase RCU stall
splat such as below:
| [ARCLinux]# while true; do ./shm_open_23-1.run-test ; done
| Running with 1000 processes for 1000 objects
| hrtimer: interrupt took 485060 ns
|
| create_cnt: 1000
| Running with 1000 processes for 1000 objects
| [ARCLinux]# INFO: rcu_preempt self-detected stall on CPU
| 2-...: (1 GPs behind) idle=a01/1/0 softirq=135770/135773 fqs=0
| INFO: rcu_preempt detected stalls on CPUs/tasks:
| 0-...: (1 GPs behind) idle=71e/0/0 softirq=135264/135264 fqs=0
| 2-...: (1 GPs behind) idle=a01/1/0 softirq=135770/135773 fqs=0
| 3-...: (1 GPs behind) idle=4e0/0/0 softirq=134304/134304 fqs=0
| (detected by 1, t=13648 jiffies, g=31493, c=31492, q=1)
Starting from ARC HS v3.0 it's possible to tie GFRC to state of up-to 4
ARC cores with help of GFRC's CORE register where we set a mask for
cores which state we need to rely on.
We update cpu mask every time new cpu came online instead of using
hardcoded one or using mask generated from "possible_cpus" as we
want it set correctly even if we run kernel on HW which has fewer cores
than expected (or we launch kernel via debugger and kick fever cores
than HW has)
Note that GFRC halts when all cores have halted and thus relies on
programming of Inter-Core-dEbug register to halt all cores when one
halts.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[vgupta: rewrote changelog]
Pull DeviceTree fixes from Rob Herring:
- update i.MX thermal binding example to use current binding, not the
deprecated one
- move arm-charlcd to auxdisplay/
- fix misspelling of "debounce-interval"
* tag 'devicetree-fixes-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: power: Fix "debounce-interval" property misspelling
auxdisplay: Move arm-charlcd binding to correct folder
dt-bindings: thermal: imx: update the binding to new method
Jiri Pirko says:
====================
mlxsw: couple of fixes
Couple of unrelated fixes for mlxsw.
---
v1->v2:
-patch 2:
- rebase on top of current -net tree
- removed forgotten empty line
-patch 3:
- new patch
-patch 4:
- new patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
One of the basic construct in the device is a port-VLAN pair, which can
be bound to a FID or a RIF in order to direct packets to the bridge or
the router, respectively.
Since not all the netdevs are configured with a VLAN (e.g., sw1p1 vs.
sw1p1.10), VID 1 is used to represent these and thus this VID can be
used by both upper devices of mlxsw ports and by the driver itself.
However, this VID is not reference counted and therefore might be freed
prematurely, which can result in various WARNINGs. For example:
$ ip link add name br0 type bridge vlan_filtering 1
$ teamd -t team0 -d -c '{"runner": {"name": "lacp"}}'
$ ip link set dev team0 master br0
$ ip link set dev enp1s0np1 master team0
$ ip address add 192.0.2.1/24 dev enp1s0np1
The enslavement to team0 will fail because team0 already has an upper
and thus vlan_vids_del_by_dev() will be executed as part of team's error
path which will delete VID 1 from enp1s0np1 (added by br0 as PVID). The
WARNING will be generated when the driver will realize it can't find VID
1 on the port and bind it to a RIF.
Fix this by adding a reference count to the VLAN entries on the port, in
a similar fashion to the reference counting used by the corresponding
'vlan_vid_info' structure in the 8021q driver.
Fixes: c57529e1d5 ("mlxsw: spectrum: Replace vPorts with Port-VLAN")
Reported-by: Tal Bar <talb@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Tested-by: Tal Bar <talb@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When multicast snooping is enabled, the Linux bridge resorts to flooding
unregistered multicast packets to all ports only in case it did not
detect a querier in the network.
The above condition is not reflected to underlying drivers, which is
especially problematic in IPv6 environments, as multicast snooping is
enabled by default and since neighbour solicitation packets might be
treated as unregistered multicast packets in case there is no
corresponding MDB entry.
Until the Linux bridge reflects its querier state to underlying drivers,
simply treat unregistered multicast packets as broadcast and allow them
to reach their destination.
Fixes: 9df552ef3e ("mlxsw: spectrum: Improve IPv6 unregistered multicast flooding")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current code uses global variables, adjusts them and passes pointer down
to devlink. With every other mlxsw_core instance, the previously passed
pointer values are rewritten. Fix this by de-globalize the variables and
also memcpy size_params during devlink resource registration.
Also, introduce a convenient size_param_init helper.
Fixes: ef3116e540 ("mlxsw: spectrum: Register KVD resources with devlink")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IP_TTL, IP_ECN and IP_DSCP are using the same offset within the
scratchpad as L4 ports. Fix this by shifting all up.
Fixes: 5f57e09091 ("mlxsw: acl: Add ip ttl acl element")
Fixes: i80d0fe4710c ("mlxsw: acl: Add ip tos acl element")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun says:
====================
net/smc: fixes 2018-02-28
here are 3 smc bug fixes for the net-tree. Karsten's first patch is
the reworked version of last week's
"[PATCH net-next 2/5] net/smc: fix structure size"
patch, now solved without using __packed, and now targetted for net
instead of net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The CONFIRM LINK reply message must contain the link_id sent
by the server. And set the link_id explicitly when
initializing the link.
Signed-off-by: Karsten Graul <kgraul@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sizeof(struct smc_cdc_msg) evaluates to 48 bytes instead of the
required 44 bytes. We need to use the constant value of
SMC_WR_TX_SIZE to set and check the control message length.
Signed-off-by: Karsten Graul <kgraul@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We try to disable NAPI to prevent a single XDP TX queue being used by
multiple cpus. But we don't check if device is up (NAPI is enabled),
this could result stall because of infinite wait in
napi_disable(). Fixing this by checking device state through
netif_running() before.
Fixes: 4941d472bf ("virtio-net: do not reset during XDP set")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the Intel Edison module is powered with 3.3V, the reboot command makes
the module stuck. If the module is powered at a greater voltage, like 4.4V
(as the Edison Mini Breakout board does), reboot works OK.
The official Intel Edison BSP sends the IPCMSG_COLD_RESET message to the
SCU by default. The IPCMSG_COLD_BOOT which is used by the upstream kernel
is only sent when explicitely selected on the kernel command line.
Use IPCMSG_COLD_RESET unconditionally which makes reboot work independent
of the power supply voltage.
[ tglx: Massaged changelog ]
Fixes: bda7b072de ("x86/platform/intel-mid: Implement power off sequence")
Signed-off-by: Sebastian Panceac <sebastian@resin.io>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1519810849-15131-1-git-send-email-sebastian@resin.io
PSDT field section according to NVM_Express-1.3:
"This field specifies whether PRPs or SGLs are used for any data
transfer associated with the command. PRPs shall be used for all
Admin commands for NVMe over PCIe. SGLs shall be used for all Admin
and I/O commands for NVMe over Fabrics. This field shall be set to
01b for NVMe over Fabrics 1.0 implementations.
Suggested-by: Idan Burstein <idanb@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
