The driver called pwm_config() and pwm_enable() separately. Today both
are wrappers for pwm_apply_might_sleep() and it's more effective to call
this function directly and only once. Also don't configure the
duty_cycle and period if the next operation is to disable the PWM so
configure the PWM in max77693_haptic_enable().
With the direct use of pwm_apply_might_sleep() the need to call
pwm_apply_args() in .probe() is now gone, too, so drop this one.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250630103851.2069952-2-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull RTC updates from Alexandre Belloni:
"Support for a new RTC in an existing driver and all the drivers
exposing clocks using the common clock framework have been converted
to determine_rate(). Summary:
Subsystem:
- Convert drivers exposing a clock from round_rate() to determine_rate()
Drivers:
- ds1307: oscillator stop flag handling for ds1341
- pcf85063: add support for RV8063"
* tag 'rtc-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits)
rtc: ds1685: Update Joshua Kinard's email address.
rtc: rv3032: convert from round_rate() to determine_rate()
rtc: rv3028: convert from round_rate() to determine_rate()
rtc: pcf8563: convert from round_rate() to determine_rate()
rtc: pcf85063: convert from round_rate() to determine_rate()
rtc: nct3018y: convert from round_rate() to determine_rate()
rtc: max31335: convert from round_rate() to determine_rate()
rtc: m41t80: convert from round_rate() to determine_rate()
rtc: hym8563: convert from round_rate() to determine_rate()
rtc: ds1307: convert from round_rate() to determine_rate()
rtc: rv3028: fix incorrect maximum clock rate handling
rtc: pcf8563: fix incorrect maximum clock rate handling
rtc: pcf85063: fix incorrect maximum clock rate handling
rtc: nct3018y: fix incorrect maximum clock rate handling
rtc: hym8563: fix incorrect maximum clock rate handling
rtc: ds1307: fix incorrect maximum clock rate handling
rtc: pcf85063: scope pcf85063_config structures
rtc: Optimize calculations in rtc_time64_to_tm()
dt-bindings: rtc: amlogic,a4-rtc: Add compatible string for C3
rtc: ds1307: handle oscillator stop flag (OSF) for ds1341
...
Pull powerpc fixes from Madhavan Srinivasan:
- Fixes for several issues in the powernv PCI hotplug path
- Fix htmldoc generation for htm.rst in toctree
- Add jit support for load_acquire and store_release in ppc64 bpf jit
Thanks to Bjorn Helgaas, Hari Bathini, Puranjay Mohan, Saket Kumar
Bhaskar, Shawn Anastasio, Timothy Pearson, and Vishal Parmar
* tag 'powerpc-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc64/bpf: Add jit support for load_acquire and store_release
docs: powerpc: add htm.rst to toctree
PCI: pnv_php: Enable third attention indicator state
PCI: pnv_php: Fix surprise plug detection and recovery
powerpc/eeh: Make EEH driver device hotplug safe
powerpc/eeh: Export eeh_unfreeze_pe()
PCI: pnv_php: Work around switches with broken presence detection
PCI: pnv_php: Clean up allocated IRQs on unplug
Pull non-MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "squashfs: Remove page->mapping references" (Matthew Wilcox) gets
us closer to being able to remove page->mapping
- "relayfs: misc changes" (Jason Xing) does some maintenance and
minor feature addition work in relayfs
- "kdump: crashkernel reservation from CMA" (Jiri Bohac) switches
us from static preallocation of the kdump crashkernel's working
memory over to dynamic allocation. So the difficulty of a-priori
estimation of the second kernel's needs is removed and the first
kernel obtains extra memory
- "generalize panic_print's dump function to be used by other
kernel parts" (Feng Tang) implements some consolidation and
rationalization of the various ways in which a failing kernel
splats information at the operator
* tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (80 commits)
tools/getdelays: add backward compatibility for taskstats version
kho: add test for kexec handover
delaytop: enhance error logging and add PSI feature description
samples: Kconfig: fix spelling mistake "instancess" -> "instances"
fat: fix too many log in fat_chain_add()
scripts/spelling.txt: add notifer||notifier to spelling.txt
xen/xenbus: fix typo "notifer"
net: mvneta: fix typo "notifer"
drm/xe: fix typo "notifer"
cxl: mce: fix typo "notifer"
KVM: x86: fix typo "notifer"
MAINTAINERS: add maintainers for delaytop
ucount: use atomic_long_try_cmpxchg() in atomic_long_inc_below()
ucount: fix atomic_long_inc_below() argument type
kexec: enable CMA based contiguous allocation
stackdepot: make max number of pools boot-time configurable
lib/xxhash: remove unused functions
init/Kconfig: restore CONFIG_BROKEN help text
lib/raid6: update recov_rvv.c zero page usage
docs: update docs after introducing delaytop
...
Pull more tracing updates from Steven Rostedt:
- Remove unneeded goto out statements
Over time, the logic was restructured but left a "goto out" where the
out label simply did a "return ret;". Instead of jumping to this out
label, simply return immediately and remove the out label.
- Add guard(ring_buffer_nest)
Some calls to the tracing ring buffer can happen when the ring buffer
is already being written to at the same context (for example, a
trace_printk() in between a ring_buffer_lock_reserve() and a
ring_buffer_unlock_commit()).
In order to not trigger the recursion detection, these functions use
ring_buffer_nest_start() and ring_buffer_nest_end(). Create a guard()
for these functions so that their use cases can be simplified and not
need to use goto for the release.
- Clean up the tracing code with guard() and __free() logic
There were several locations that were prime candidates for using
guard() and __free() helpers. Switch them over to use them.
- Fix output of function argument traces for unsigned int values
The function tracer with "func-args" option set will record up to 6
argument registers and then use BTF to format them for human
consumption when the trace file is read. There are several arguments
that are "unsigned long" and even "unsigned int" that are either and
address or a mask. It is easier to understand if they were printed
using hexadecimal instead of decimal. The old method just printed all
non-pointer values as signed integers, which made it even worse for
unsigned integers.
For instance, instead of:
__local_bh_disable_ip(ip=-2127311112, cnt=256) <-handle_softirqs
show:
__local_bh_disable_ip(ip=0xffffffff8133cef8, cnt=0x100) <-handle_softirqs"
* tag 'trace-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Have unsigned int function args displayed as hexadecimal
ring-buffer: Convert ring_buffer_write() to use guard(preempt_notrace)
tracing: Use __free(kfree) in trace.c to remove gotos
tracing: Add guard() around locks and mutexes in trace.c
tracing: Add guard(ring_buffer_nest)
tracing: Remove unneeded goto out logic
Pull module updates from Daniel Gomez:
"This is a small set of changes for modules, primarily to extend module
users to use the module data structures in combination with the
already no-op stub module functions, even when support for modules is
disabled in the kernel configuration. This change follows the kernel's
coding style for conditional compilation and allows kunit code to drop
all CONFIG_MODULES ifdefs, which is also part of the changes. This
should allow others part of the kernel to do the same cleanup.
The remaining changes include a fix for module name length handling
which could potentially lead to the removal of an incorrect module,
and various cleanups"
* tag 'modules-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
module: Rename MAX_PARAM_PREFIX_LEN to __MODULE_NAME_LEN
tracing: Replace MAX_PARAM_PREFIX_LEN with MODULE_NAME_LEN
module: Restore the moduleparam prefix length check
module: Remove unnecessary +1 from last_unloaded_module::name size
module: Prevent silent truncation of module name in delete_module(2)
kunit: test: Drop CONFIG_MODULE ifdeffery
module: make structure definitions always visible
module: move 'struct module_use' to internal.h
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Enable a set of Clippy lints: 'ptr_as_ptr', 'ptr_cast_constness',
'as_ptr_cast_mut', 'as_underscore', 'cast_lossless' and
'ref_as_ptr'
These are intended to avoid type casts with the 'as' operator,
which are quite powerful, into restricted variants that are less
powerful and thus should help to avoid mistakes
- Remove the 'author' key now that most instances were moved to the
plural one in the previous cycle
'kernel' crate:
- New 'bug' module: add 'warn_on!' macro which reuses the existing
'BUG'/'WARN' infrastructure, i.e. it respects the usual sysctls and
kernel parameters:
warn_on!(value == 42);
To avoid duplicating the assembly code, the same strategy is
followed as for the static branch code in order to share the
assembly between both C and Rust
This required a few rearrangements on C arch headers -- the
existing C macros should still generate the same outputs, thus no
functional change expected there
- 'workqueue' module: add delayed work items, including a
'DelayedWork' struct, a 'impl_has_delayed_work!' macro and an
'enqueue_delayed' method, e.g.:
/// Enqueue the struct for execution on the system workqueue,
/// where its value will be printed 42 jiffies later.
fn print_later(value: Arc<MyStruct>) {
let _ = workqueue::system().enqueue_delayed(value, 42);
}
- New 'bits' module: add support for 'bit' and 'genmask' functions,
with runtime- and compile-time variants, e.g.:
static_assert!(0b00010000 == bit_u8(4));
static_assert!(0b00011110 == genmask_u8(1..=4));
assert!(checked_bit_u32(u32::BITS).is_none());
- 'uaccess' module: add 'UserSliceReader::strcpy_into_buf', which
reads NUL-terminated strings from userspace into a '&CStr'
Introduce 'UserPtr' newtype, similar in purpose to '__user' in C,
to minimize mistakes handling userspace pointers, including mixing
them up with integers and leaking them via the 'Debug' trait. Add
it to the prelude, too
- Start preparations for the replacement of our custom 'CStr' type
with the analogous type in the 'core' standard library. This will
take place across several cycles to make it easier. For this one,
it includes a new 'fmt' module, using upstream method names and
some other cleanups
Replace 'fmt!' with a re-export, which helps Clippy lint properly,
and clean up the found 'uninlined-format-args' instances
- 'dma' module:
- Clarify wording and be consistent in 'coherent' nomenclature
- Convert the 'read!()' and 'write!()' macros to return a 'Result'
- Add 'as_slice()', 'write()' methods in 'CoherentAllocation'
- Expose 'count()' and 'size()' in 'CoherentAllocation' and add
the corresponding type invariants
- Implement 'CoherentAllocation::dma_handle_with_offset()'
- 'time' module:
- Make 'Instant' generic over clock source. This allows the
compiler to assert that arithmetic expressions involving the
'Instant' use 'Instants' based on the same clock source
- Make 'HrTimer' generic over the timer mode. 'HrTimer' timers
take a 'Duration' or an 'Instant' when setting the expiry time,
depending on the timer mode. With this change, the compiler can
check the type matches the timer mode
- Add an abstraction for 'fsleep'. 'fsleep' is a flexible sleep
function that will select an appropriate sleep method depending
on the requested sleep time
- Avoid 64-bit divisions on 32-bit hardware when calculating
timestamps
- Seal the 'HrTimerMode' trait. This prevents users of the
'HrTimerMode' from implementing the trait on their own types
- Pass the correct timer mode ID to 'hrtimer_start_range_ns()'
- 'list' module: remove 'OFFSET' constants, allowing to remove
pointer arithmetic; now 'impl_list_item!' invokes
'impl_has_list_links!' or 'impl_has_list_links_self_ptr!'. Other
simplifications too
- 'types' module: remove 'ForeignOwnable::PointedTo' in favor of a
constant, which avoids exposing the type of the opaque pointer, and
require 'into_foreign' to return non-null
Remove the 'Either<L, R>' type as well. It is unused, and we want
to encourage the use of custom enums for concrete use cases
- 'sync' module: implement 'Borrow' and 'BorrowMut' for 'Arc' types
to allow them to be used in generic APIs
- 'alloc' module: implement 'Borrow' and 'BorrowMut' for 'Box<T, A>';
and 'Borrow', 'BorrowMut' and 'Default' for 'Vec<T, A>'
- 'Opaque' type: add 'cast_from' method to perform a restricted cast
that cannot change the inner type and use it in callers of
'container_of!'. Rename 'raw_get' to 'cast_into' to match it
- 'rbtree' module: add 'is_empty' method
- 'sync' module: new 'aref' submodule to hold 'AlwaysRefCounted' and
'ARef', which are moved from the too general 'types' module which
we want to reduce or eventually remove. Also fix a safety comment
in 'static_lock_class'
'pin-init' crate:
- Add 'impl<T, E> [Pin]Init<T, E> for Result<T, E>', so results are
now (pin-)initializers
- Add 'Zeroable::init_zeroed()' that delegates to 'init_zeroed()'
- New 'zeroed()', a safe version of 'mem::zeroed()' and also provide
it via 'Zeroable::zeroed()'
- Implement 'Zeroable' for 'Option<&T>', 'Option<&mut T>' and for
'Option<[unsafe] [extern "abi"] fn(...args...) -> ret>' for
'"Rust"' and '"C"' ABIs and up to 20 arguments
- Changed blanket impls of 'Init' and 'PinInit' from 'impl<T, E>
[Pin]Init<T, E> for T' to 'impl<T> [Pin]Init<T> for T'
- Renamed 'zeroed()' to 'init_zeroed()'
- Upstream dev news: improve CI more to deny warnings, use
'--all-targets'. Check the synchronization status of the two
'-next' branches in upstream and the kernel
MAINTAINERS:
- Add Vlastimil Babka, Liam R. Howlett, Uladzislau Rezki and Lorenzo
Stoakes as reviewers (thanks everyone)
And a few other cleanups and improvements"
* tag 'rust-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (76 commits)
rust: Add warn_on macro
arm64/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
riscv/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
x86/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
rust: kernel: move ARef and AlwaysRefCounted to sync::aref
rust: sync: fix safety comment for `static_lock_class`
rust: types: remove `Either<L, R>`
rust: kernel: use `core::ffi::CStr` method names
rust: str: add `CStr` methods matching `core::ffi::CStr`
rust: str: remove unnecessary qualification
rust: use `kernel::{fmt,prelude::fmt!}`
rust: kernel: add `fmt` module
rust: kernel: remove `fmt!`, fix clippy::uninlined-format-args
scripts: rust: emit path candidates in panic message
scripts: rust: replace length checks with match
rust: list: remove nonexistent generic parameter in link
rust: bits: add support for bits/genmask macros
rust: list: remove OFFSET constants
rust: list: add `impl_list_item!` examples
rust: list: use fully qualified path
...
If an error occurs in the loop that creates the device adapters, then a
reference to 'dev' still needs to be released.
Use for_each_child_of_node_scoped() to both fix the issue and save one line
of code.
Fixes: d0f8e97866 ("i2c: muxes: add support for tsd,mule-i2c multiplexer")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
This patch fixes an issue where the touchpad cursor movement becomes
slow on the Dell Precision 5560. Force the touchpad freq to 100khz
as a workaround.
Tested on Dell Precision 5560 with 6.14 to 6.14.6. Cursor movement
is now smooth and responsive.
Signed-off-by: fangzhong.zhou <myth5@myth5.com>
[wsa: kept sorting and removed unnecessary parts from commit msg]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
When the first driver for Apple Silicon was upstreamed we accidentally
included `default ARCH_APPLE` in its Kconfig which then spread to almost
every subsequent driver. As soon as ARCH_APPLE is set to y this will
pull in many drivers as built-ins which is not what we want.
Thus, drop `default ARCH_APPLE` from Kconfig.
Signed-off-by: Sven Peter <sven@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
i2c-host for v6.17, part 2
- apple: add support for Apple A7–A11, T2 chips
- qcom-geni: fix controller frequency mapping
- stm32f7: add DMA-safe transfer support
- tegra: use controller reset if device reset is missing
- tegra: remove unnecessary dma_sync*() calls
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and easier to
reason about.
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In init_cpu_fullname(), a constant pointer to "model" property is
retrieved. It's later modified by the strsep() function, which is
illegal and corrupts kernel's FDT copy. This is shown by dmesg,
OF: fdt: not creating '/sys/firmware/fdt': CRC check failed
Create a mutable copy of the model property and do in-place operations
on the mutable copy instead. loongson_sysconf.cpuname lives across the
kernel lifetime, thus manually releasing isn't necessary.
Also move the of_node_put() call for the root node after the usage of
its property, since of_node_put() decreases the reference counter thus
usage after the call is unsafe.
Cc: stable@vger.kernel.org
Fixes: 44a01f1f72 ("LoongArch: Parsing CPU-related information from DTS")
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The LoongArch mem= parameter parser was previously limited to the
mem=<size>@<start> format. This was inconvenient for the common use
case of simply capping the total system memory, as it forced users to
manually specify a start address. It was also inconsistent with the
behavior on other architectures.
This patch enhances the parser in early_parse_mem() to also support the
more user-friendly mem=<size> format. The implementation now checks for
the presence of the '@' symbol to determine the user's intent:
- If mem=<size> is provided (no '@'), the kernel now calls
memblock_enforce_memory_limit(). This trims memory from the top down
to the specified size.
- If mem=<size>@<start> is provided, the original behavior is retained
for backward compatibility. This allows for defining specific memory
banks.
This change introduces an important usage rule reflected in the code's
comments: the mem=<size> format should only be specified once on the
kernel command line. It acts as a single, global cap on total memory. In
contrast, the mem=<size>@<start> format can be specified multiple times
to define several distinct memory regions.
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Now relocate_new_kernel_size is a .long value, which means 32bit, so its
high 32bit is undefined. This causes memcpy((void *)reboot_code_buffer,
relocate_new_kernel, relocate_new_kernel_size) in machine_kexec_prepare()
access out of range memories in some cases, and then end up with an ADE
exception.
So make relocate_new_kernel_size be a .quad value, which means 64bit, to
avoid such errors.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
According to the "LoongArch Reference Manual Volume 1: Basic
Architecture", the KSave registers (SAVE0-SAVE15) are defined in
Section 7.4.16 "Data Save (SAVE)" and listed in Table 7-1 "Control
and Status Registers Overview". These registers occupy the CSR
addresses from 0x30 to 0x3F, with 16 registers in total.
This patch completes the definitions of KS9 to KS15, so as to match
the architecture specification.
Reviewed-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When rv3028_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: f583c341a5 ("rtc: rv3028: add clkout support")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-6-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When pcf8563_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: a39a6405d5 ("rtc: pcf8563: add CLKOUT to common clock framework")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-5-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When pcf85063_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: 8c229ab604 ("rtc: pcf85063: Add pcf85063 clkout control to common clock framework")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-4-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When nct3018y_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: 5adbaed16c ("rtc: Add NCT3018Y real time clock driver")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-3-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When hym8563_clkout_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: dcaf038493 ("rtc: add hym8563 rtc-driver")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-2-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When ds3231_clk_sqw_round_rate() is called with a requested rate higher
than the highest supported rate, it currently returns 0, which disables
the clock. According to the clk API, round_rate() should instead return
the highest supported rate. Update the function to return the maximum
supported rate in this case.
Fixes: 6c6ff145b3 ("rtc: ds1307: add clock provider support for DS3231")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-rtc-clk-round-rate-v1-1-33140bb2278e@redhat.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This reverts commit 864f9963ec.
The patch is wrong as it checks vc_origin against vc_screenbuf,
while in text mode it should compare against vga_vram_base.
As such it broke VGA text scrolling, which can be reproduced like this:
(1) boot a kernel that is configured to use text mode VGA-console
(2) type commands: ls -l /usr/bin | less -S
(3) scroll up/down with cursor-down/up keys
Reported-by: Jari Ruusu <jariruusu@protonmail.com>
Cc: stable@vger.kernel.org
Cc: Yi Yang <yiyang13@huawei.com>
Cc: GONG Ruiqi <gongruiqi1@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
This issue triggers when a userspace program does an ioctl
FBIOPUT_CON2FBMAP by passing console number and frame buffer number.
Ideally this maps console to frame buffer and updates the screen if
console is visible.
As part of mapping it has to do resize of console according to frame
buffer info. if this resize fails and returns from vc_do_resize() and
continues further. At this point console and new frame buffer are mapped
and sets display vars. Despite failure still it continue to proceed
updating the screen at later stages where vc_data is related to previous
frame buffer and frame buffer info and display vars are mapped to new
frame buffer and eventully leading to out-of-bounds write in
fast_imageblit(). This bheviour is excepted only when fg_console is
equal to requested console which is a visible console and updates screen
with invalid struct references in fbcon_putcs().
Reported-and-tested-by: syzbot+c4b7aa0513823e2ea880@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c4b7aa0513823e2ea880
Signed-off-by: Sravan Kumar Gundu <sravankumarlpu@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Pull pin control updates from Linus Walleij:
"Nothing stands out, apart from maybe the interesting Eswin EIC7700, a
RISC-V SoC I've never seen before.
Core changes:
- Open code PINCTRL_FUNCTION_DESC() instead of defining a complex
macro only used in one place
- Add pinmux_generic_add_pinfunction() helper and use this in a few
drivers
New drivers:
- Amlogic S7, S7D and S6 pin control support
- Eswin EIC7700 pin control support
- Qualcomm PMIV0104, PM7550 and Milos pin control support
Because of unhelpful numbering schemes, the Qualcomm driver now
needs to start to rely on SoC codenames
- STM32 HDP pin control support
- Mediatek MT8189 pin control support
Improvements:
- Switch remaining pin control drivers over to the new GPIO set
callback that provides a return value
- Support RSVD (reserved) pins in the STM32 driver
- Move many fixed assignments over to pinctrl_desc definitions
- Handle multiple TLMM regions in the Qualcomm driver"
* tag 'pinctrl-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits)
pinctrl: mediatek: Add pinctrl driver for mt8189
dt-bindings: pinctrl: mediatek: Add support for mt8189
pinctrl: aspeed-g6: Add PCIe RC PERST pin group
pinctrl: ingenic: use pinmux_generic_add_pinfunction()
pinctrl: keembay: use pinmux_generic_add_pinfunction()
pinctrl: mediatek: moore: use pinmux_generic_add_pinfunction()
pinctrl: airoha: use pinmux_generic_add_pinfunction()
pinctrl: equilibrium: use pinmux_generic_add_pinfunction()
pinctrl: provide pinmux_generic_add_pinfunction()
pinctrl: pinmux: open-code PINCTRL_FUNCTION_DESC()
pinctrl: ma35: use new GPIO line value setter callbacks
MAINTAINERS: add Clément Le Goffic as STM32 HDP maintainer
pinctrl: stm32: Introduce HDP driver
dt-bindings: pinctrl: stm32: Introduce HDP
pinctrl: qcom: Add Milos pinctrl driver
dt-bindings: pinctrl: document the Milos Top Level Mode Multiplexer
pinctrl: qcom: spmi: Add PM7550
dt-bindings: pinctrl: qcom,pmic-gpio: Add PM7550 support
pinctrl: qcom: spmi: Add PMIV0104
dt-bindings: pinctrl: qcom,pmic-gpio: Add PMIV0104 support
...
The mempool wake-up fix introduced in commit a5867a218d ("mm: mempool:
fix wake-up edge case bug for zero-minimum pools") inlined the
add_element() logic in mempool_free() to return the element to the
zero-minimum pool:
pool->elements[pool->curr_nr++] = element;
This causes crash, because mempool_init_node() does not initialize with
real allocation for zero-minimum pool, it only returns ZERO_SIZE_PTR to
the elements array which is unable to be dereferenced, and the
pre-allocation of this array never happened since the while test:
while (pool->curr_nr < pool->min_nr)
can never be satisfied as min_nr is zero, so the pool does not actually
reserve any buffer, the only way so far is to call alloc_fn() to get
buffer from SLUB, but if the memory is under high pressure the alloc_fn()
could never get any buffer, the waiting thread would be in an indefinite
loop of wake-sleep in a period until there is free memory to get.
This patch changes mempool_init_node() to allocate 1 element for the
elements array of zero-minimum pool, so that the pool will have reserved
buffer to use. This will fix the crash issue and let the waiting thread
can get the reserved element when alloc_fn() failed to get buffer under
high memory pressure.
Also modify add_element() to support zero-minimum pool with simplifying
codes of zero-minimum handling in mempool_free().
Link: https://lkml.kernel.org/r/e01f00f3-58d9-4ca7-af54-bfa42fec9527@suse.com
Fixes: a5867a218d ("mm: mempool: fix wake-up edge case bug for zero-minimum pools")
Signed-off-by: Yadan Fan <ydfan@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Instead of calculating the swap entry differently in different swapin
paths, calculate it early before the swap cache lookup and use that for
the lookup and later swapin. And after swapin have brought a folio,
simply round it down against the size of the folio.
This is simple and effective enough to verify the swap value. A folio's
swap entry is always aligned by its size. Any kind of parallel split or
race is acceptable because the final shmem_add_to_page_cache ensures that
all entries covered by the folio are correct, and thus there will be no
data corruption.
This also prevents false positive cache lookup. If a shmem read request's
index points to the middle of a large swap entry, previously, shmem will
try the swap cache lookup using the large swap entry's starting value
(which is the first sub swap entry of this large entry). This will lead
to false positive lookup results if only the first few swap entries are
cached but the actual requested swap entry pointed by the index is
uncached. This is not a rare event, as swap readahead always tries to
cache order 0 folios when possible.
And this shouldn't cause any increased repeated faults. Instead, no
matter how the shmem mapping is split in parallel, as long as the mapping
still contains the right entries, the swapin will succeed.
The final object size and stack usage are also reduced due to simplified
code:
./scripts/bloat-o-meter mm/shmem.o.old mm/shmem.o
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-145 (-145)
Function old new delta
shmem_swapin_folio 4056 3911 -145
Total: Before=33242, After=33097, chg -0.44%
Stack usage (Before vs After):
mm/shmem.c:2314:12:shmem_swapin_folio 264 static
mm/shmem.c:2314:12:shmem_swapin_folio 256 static
And while at it, round down the index too if swap entry is round down.
The index is used either for folio reallocation or confirming the mapping
content. In either case, it should be aligned with the swap folio.
Link: https://lkml.kernel.org/r/20250728075306.12704-8-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Instead of keeping different paths of splitting the entry before the swap
in start, move the entry splitting after the swapin has put the folio in
swap cache (or set the SWAP_HAS_CACHE bit). This way we only need one
place and one unified way to split the large entry. Whenever swapin
brought in a folio smaller than the shmem swap entry, split the entry and
recalculate the entry and index for verification.
This removes duplicated codes and function calls, reduces LOC, and the
split is less racy as it's guarded by swap cache now. So it will have a
lower chance of repeated faults due to raced split. The compiler is also
able to optimize the coder further:
bloat-o-meter results with GCC 14:
With DEBUG_SECTION_MISMATCH (-fno-inline-functions-called-once):
./scripts/bloat-o-meter mm/shmem.o.old mm/shmem.o
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-143 (-143)
Function old new delta
shmem_swapin_folio 2358 2215 -143
Total: Before=32933, After=32790, chg -0.43%
With !DEBUG_SECTION_MISMATCH:
add/remove: 0/1 grow/shrink: 1/0 up/down: 1069/-749 (320)
Function old new delta
shmem_swapin_folio 2871 3940 +1069
shmem_split_large_entry.isra 749 - -749
Total: Before=32806, After=33126, chg +0.98%
Since shmem_split_large_entry is only called in one place now. The
compiler will either generate more compact code, or inlined it for
better performance.
Link: https://lkml.kernel.org/r/20250728075306.12704-5-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/shmem, swap: bugfix and improvement of mTHP swap in", v6.
The current THP swapin path have several problems. It may potentially
hang, may cause redundant faults due to false positive swap cache lookup,
and it issues redundant Xarray walks. !CONFIG_TRANSPARENT_HUGEPAGE builds
may also contain unnecessary THP checks.
This series fixes all of the mentioned issues, the code should be more
robust and prepared for the swap table series. Now 4 walks is reduced to
3 (get order & confirm, confirm, insert folio),
!CONFIG_TRANSPARENT_HUGEPAGE build overhead is also minimized, and comes
with a sanity check now.
The performance is slightly better after this series, sequential swap in
of 24G data from ZRAM, using transparent_hugepage_tmpfs=always (24 samples
each):
Before: avg: 10.66s, stddev: 0.04
After patch 1: avg: 10.58s, stddev: 0.04
After patch 2: avg: 10.65s, stddev: 0.05
After patch 3: avg: 10.65s, stddev: 0.04
After patch 4: avg: 10.67s, stddev: 0.04
After patch 5: avg: 9.79s, stddev: 0.04
After patch 6: avg: 9.79s, stddev: 0.05
After patch 7: avg: 9.78s, stddev: 0.05
After patch 8: avg: 9.79s, stddev: 0.04
Several patches improve the performance by a little, which is about ~8%
faster in total.
Build kernel test showed very slightly improvement, testing with make -j48
with defconfig in a 768M memcg also using ZRAM as swap, and
transparent_hugepage_tmpfs=always (6 test runs):
Before: avg: 3334.66s, stddev: 43.76
After patch 1: avg: 3349.77s, stddev: 18.55
After patch 2: avg: 3325.01s, stddev: 42.96
After patch 3: avg: 3354.58s, stddev: 14.62
After patch 4: avg: 3336.24s, stddev: 32.15
After patch 5: avg: 3325.13s, stddev: 22.14
After patch 6: avg: 3285.03s, stddev: 38.95
After patch 7: avg: 3287.32s, stddev: 26.37
After patch 8: avg: 3295.87s, stddev: 46.24
This patch (of 7):
Currently shmem calls xa_get_order to get the swap radix entry order,
requiring a full tree walk. This can be easily combined with the swap
entry value checking (shmem_confirm_swap) to avoid the duplicated lookup
and abort early if the entry is gone already. Which should improve the
performance.
Link: https://lkml.kernel.org/r/20250728075306.12704-1-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20250728075306.12704-3-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
