If the MST topology is removed during the reception of an MST down reply
or MST up request sideband message, the
drm_dp_mst_topology_mgr::up_req_recv/down_rep_recv states could be reset
from one thread via drm_dp_mst_topology_mgr_set_mst(false), racing with
the reading/parsing of the message from another thread via
drm_dp_mst_handle_down_rep() or drm_dp_mst_handle_up_req(). The race is
possible since the reader/parser doesn't hold any lock while accessing
the reception state. This in turn can lead to a memory corruption in the
reader/parser as described by commit bd2fccac61 ("drm/dp_mst: Fix MST
sideband message body length check").
Fix the above by resetting the message reception state if needed before
reading/parsing a message. Another solution would be to hold the
drm_dp_mst_topology_mgr::lock for the whole duration of the message
reception/parsing in drm_dp_mst_handle_down_rep() and
drm_dp_mst_handle_up_req(), however this would require a bigger change.
Since the fix is also needed for stable, opting for the simpler solution
in this patch.
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org>
Fixes: 1d082618bb ("drm/display/dp_mst: Fix down/up message handling after sink disconnect")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13056
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-2-imre.deak@intel.com
The rework of possible CPUs management erroneously disabled SMP when the
IO/APIC is disabled either by the 'noapic' command line parameter or during
IO/APIC setup. SMP is possible without IO/APIC.
Remove the ioapic_is_disabled conditions from the relevant possible CPU
management code paths to restore the orgininal behaviour.
Fixes: 7c0edad364 ("x86/cpu/topology: Rework possible CPU management")
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241202145905.1482-1-ffmancera@riseup.net
Remove hardcoded dmic codec from the UL_SRC dai link to avoid requiring
a dmic codec to be present for the driver to probe, as not every
MT8188-based platform might need a dmic codec. The codec can be assigned
to the dai link through the dai-link property in Devicetree on the
platforms where it is needed.
No Devicetree currently relies on it so it is safe to remove without
worrying about backward compatibility.
Fixes: 9f08dcbdde ("ASoC: mediatek: mt8188-mt6359: support new board with nau88255")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20241203-mt8188-6359-unhardcode-dmic-v1-1-346e3e5cbe6d@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The set_p4d() and set_pgd() functions (in 4-level or 5-level page table setups
respectively) assume that the root page table is actually a 8KiB allocation,
with the userspace root immediately after the kernel root page table (so that
the former can enforce NX on on all the subordinate page tables, which are
actually shared).
However, users of the kernel_ident_mapping_init() code do not give it an 8KiB
allocation for its PGD. Both swsusp_arch_resume() and acpi_mp_setup_reset()
allocate only a single 4KiB page. The kexec code on x86_64 currently gets
away with it purely by chance, because it allocates 8KiB for its "control
code page" and then actually uses the first half for the PGD, then copies the
actual trampoline code into the second half only after the identmap code has
finished scribbling over it.
Fix this by defining a _PAGE_NOPTISHADOW bit (which can use the same bit as
_PAGE_SAVED_DIRTY since one is only for the PGD/P4D root and the other is
exclusively for leaf PTEs.). This instructs __pti_set_user_pgtbl() not to
write to the userspace 'shadow' PGD.
Strictly, the _PAGE_NOPTISHADOW bit doesn't need to be written out to the
actual page tables; since __pti_set_user_pgtbl() returns the value to be
written to the kernel page table, it could be filtered out. But there seems
to be no benefit to actually doing so.
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/412c90a4df7aef077141d9f68d19cbe5602d6c6d.camel@infradead.org
Cc: stable@kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
The fix for a memory corruption contained a off-by-one error and
caused the compressor to fail in legit cases.
Cc: Kinsey Moore <kinsey.moore@oarcorp.com>
Cc: stable@vger.kernel.org
Fixes: fe051552f5 ("jffs2: Prevent rtime decompress memory corruption")
Signed-off-by: Richard Weinberger <richard@nod.at>
Commit 25c17c4b55 ("hugetlb: arm64: add mte support") improved the
copy_highpage() function to update the tags in the destination hugetlb
folio. However, when the source folio isn't tagged, the code takes the
non-hugetlb path where try_page_mte_tagging() warns as the destination
is a hugetlb folio:
WARNING: CPU: 0 PID: 363 at arch/arm64/include/asm/mte.h:58 copy_highpage+0x1d4/0x2d8
[...]
pc : copy_highpage+0x1d4/0x2d8
lr : copy_highpage+0x78/0x2d8
[...]
Call trace:
copy_highpage+0x1d4/0x2d8 (P)
copy_highpage+0x78/0x2d8 (L)
copy_user_highpage+0x20/0x48
copy_user_large_folio+0x1bc/0x268
hugetlb_wp+0x190/0x860
hugetlb_fault+0xa28/0xc10
handle_mm_fault+0x2a0/0x2c0
do_page_fault+0x12c/0x578
do_mem_abort+0x4c/0xa8
el0_da+0x44/0xb0
el0t_64_sync_handler+0xc4/0x138
el0t_64_sync+0x198/0x1a0
Change the check for the tagged status of the source folio so that it
does not fall through the non-hugetlb case. In addition, only perform
the copy (for the full folio) if the source page is the folio head and
warn if the destination folio is already tagged, for symmetry with the
non-hugetlb case.
Fixes: 25c17c4b55 ("hugetlb: arm64: add mte support")
Reported-by: Sasha Levin <sashal@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/Z0STR6VLt2MCalnY@sashalap
Link: https://lore.kernel.org/r/20241204175004.906754-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Linux currently sets the TCR_EL1.AS bit unconditionally during CPU
bring-up. On an 8-bit ASID CPU, this is RES0 and ignored, otherwise
16-bit ASIDs are enabled. However, if running in a VM and the hypervisor
reports 8-bit ASIDs (ID_AA64MMFR0_EL1.ASIDBits == 0) on a 16-bit ASIDs
CPU, Linux uses bits 8 to 63 as a generation number for tracking old
process ASIDs. The bottom 8 bits of this generation end up being written
to TTBR1_EL1 and also used for the ASID-based TLBI operations as the
upper 8 bits of the ASID. Following an ASID roll-over event we can have
threads of the same application with the same 8-bit ASID but different
generation numbers running on separate CPUs. Both TLB caching and the
TLBI operations will end up using different actual 16-bit ASIDs for the
same process.
A similar scenario can happen in a big.LITTLE configuration if the boot
CPU only uses 8-bit ASIDs while secondary CPUs have 16-bit ASIDs.
Ensure that the ASID generation is only tracked by bits 16 and up,
leaving bits 15:8 as 0 if the kernel uses 8-bit ASIDs. Note that
clearing TCR_EL1.AS is not sufficient since the architecture requires
that the top 8 bits of the ASID passed to TLBI instructions are 0 rather
than ignored in such configuration.
Cc: stable@vger.kernel.org
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: James Morse <james.morse@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241203151941.353796-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix esoteric undefined behaviour due to uninitialized stack access
in ip_vs_protocol_init(), from Jinghao Jia.
2) Fix iptables xt_LED slab-out-of-bounds due to incorrect sanitization
of the led string identifier, reported by syzbot. Patch from
Dmitry Antipov.
3) Remove WARN_ON_ONCE reachable from userspace to check for the maximum
cgroup level, nft_socket cgroup matching is restricted to 255 levels,
but cgroups allow for INT_MAX levels by default. Reported by syzbot.
4) Fix nft_inner incorrect use of percpu area to store tunnel parser
context with softirqs, resulting in inconsistent inner header
offsets that could lead to bogus rule mismatches, reported by syzbot.
5) Grab module reference on ipset core while requesting set type modules,
otherwise kernel crash is possible by removing ipset core module,
patch from Phil Sutter.
6) Fix possible double-free in nft_hash garbage collector due to unstable
walk interator that can provide twice the same element. Use a sequence
number to skip expired/dead elements that have been already scheduled
for removal. Based on patch from Laurent Fasnach
netfilter pull request 24-12-05
* tag 'nf-24-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_set_hash: skip duplicated elements pending gc run
netfilter: ipset: Hold module reference while requesting a module
netfilter: nft_inner: incorrect percpu area handling under softirq
netfilter: nft_socket: remove WARN_ON_ONCE on maximum cgroup level
netfilter: x_tables: fix LED ID check in led_tg_check()
ipvs: fix UB due to uninitialized stack access in ip_vs_protocol_init()
====================
Link: https://patch.msgid.link/20241205002854.162490-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Konstantin Shkolnyy says:
====================
vsock/test: fix wrong setsockopt() parameters
Parameters were created using wrong C types, which caused them to be of
wrong size on some architectures, causing problems.
The problem with SO_RCVLOWAT was found on s390 (big endian), while x86-64
didn't show it. After the fix, all tests pass on s390.
Then Stefano Garzarella pointed out that SO_VM_SOCKETS_* calls might have
a similar problem, which turned out to be true, hence, the second patch.
Changes for v8:
- Fix whitespace warnings from "checkpatch.pl --strict"
- Add maintainers to Cc:
Changes for v7:
- Rebase on top of https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
- Add the "net" tags to the subjects
Changes for v6:
- rework the patch #3 to avoid creating a new file for new functions,
and exclude vsock_perf from calling the new functions.
- add "Reviewed-by:" to the patch #2.
Changes for v5:
- in the patch #2 replace the introduced uint64_t with unsigned long long
to match documentation
- add a patch #3 that verifies every setsockopt() call.
Changes for v4:
- add "Reviewed-by:" to the first patch, and add a second patch fixing
SO_VM_SOCKETS_* calls, which depends on the first one (hence, it's now
a patch series.)
Changes for v3:
- fix the same problem in vsock_perf and update commit message
Changes for v2:
- add "Fixes:" lines to the commit message
====================
Link: https://patch.msgid.link/20241203150656.287028-1-kshk@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Replace setsockopt() calls with calls to functions that follow
setsockopt() with getsockopt() and check that the returned value and its
size are the same as have been set. (Except in vsock_perf.)
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Change parameters of SO_VM_SOCKETS_* to unsigned long long as documented
in the vm_sockets.h, because the corresponding kernel code requires them
to be at least 64-bit, no matter what architecture. Otherwise they are
too small on 32-bit machines.
Fixes: 5c338112e4 ("test/vsock: rework message bounds test")
Fixes: 685a21c314 ("test/vsock: add big message test")
Fixes: 542e893fba ("vsock/test: two tests to check credit update logic")
Fixes: 8abbffd27c ("test/vsock: vsock_perf utility")
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This happens on 64-bit big-endian machines.
SO_RCVLOWAT requires an int parameter. However, instead of int, the test
uses unsigned long in one place and size_t in another. Both are 8 bytes
long on 64-bit machines. The kernel, having received the 8 bytes, doesn't
test for the exact size of the parameter, it only cares that it's >=
sizeof(int), and casts the 4 lower-addressed bytes to an int, which, on
a big-endian machine, contains 0. 0 doesn't trigger an error, SO_RCVLOWAT
returns with success and the socket stays with the default SO_RCVLOWAT = 1,
which results in vsock_test failures, while vsock_perf doesn't even notice
that it's failed to change it.
Fixes: b1346338fb ("vsock_test: POLLIN + SO_RCVLOWAT test")
Fixes: 542e893fba ("vsock/test: two tests to check credit update logic")
Fixes: 8abbffd27c ("test/vsock: vsock_perf utility")
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-12-03 (ice, idpf, ixgbe, ixgbevf, igb)
This series contains updates to ice, idpf, ixgbe, ixgbevf, and igb
drivers.
For ice:
Arkadiusz corrects search for determining whether PHY clock recovery is
supported on the device.
Przemyslaw corrects mask used for PHY timestamps on ETH56G devices.
Wojciech adds missing virtchnl ops which caused NULL pointer
dereference.
Marcin fixes VLAN filter settings for uplink VSI in switchdev mode.
For idpf:
Josh restores setting of completion tag for empty buffers.
For ixgbevf:
Jake removes incorrect initialization/support of IPSEC for mailbox
version 1.5.
For ixgbe:
Jake rewords and downgrades misleading message when negotiation
of VF mailbox version is not supported.
Tore Amundsen corrects value for BASE-BX10 capability.
For igb:
Yuan Can adds proper teardown on failed pci_register_driver() call.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igb: Fix potential invalid memory access in igb_init_module()
ixgbe: Correct BASE-BX10 compliance code
ixgbe: downgrade logging of unsupported VF API version to debug
ixgbevf: stop attempting IPSEC offload on Mailbox API 1.5
idpf: set completion tag for "empty" bufs associated with a packet
ice: Fix VLAN pruning in switchdev mode
ice: Fix NULL pointer dereference in switchdev
ice: fix PHY timestamp extraction for ETH56G
ice: fix PHY Clock Recovery availability check
====================
Link: https://patch.msgid.link/20241203215521.1646668-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously a workaround was added to avoid syndrome 0xcdb051. It is
triggered when offload a rule with tunnel encapsulation, and
forwarding to another table, but not matching on the internal port in
firmware steering mode. The original workaround skips internal tunnel
port logic, which is not correct as not all cases are considered. As
an example, if vlan is configured on the uplink port, traffic can't
pass because vlan header is not added with this workaround. Besides,
there is no such issue for software steering. So, this patch removes
that, and returns error directly if trying to offload such rule for
firmware steering.
Fixes: 06b4eac9c4 ("net/mlx5e: Don't offload internal port if filter device is out device")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Tested-by: Frode Nordahl <frode.nordahl@canonical.com>
Reviewed-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241203204920.232744-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a multi-PF netdev, each traffic channel creates its own resources
against a specific PF.
In the cited commit, where this support was added, the channel_param
logic was mistakenly kept unchanged, so it always used the primary PF
which is found at priv->mdev.
In this patch we fix this by moving the logic to be per-channel, and
passing the correct mdev instance.
This bug happened to be usually harmless, as the resulting cparam
structures would be the same for all channels, due to identical FW logic
and decisions.
However, in some use cases, like fwreset, this gets broken.
This could lead to different symptoms. Example:
Error cqe on cqn 0x428, ci 0x0, qn 0x10a9, opcode 0xe, syndrome 0x4,
vendor syndrome 0x32
Fixes: e4f9686bde ("net/mlx5e: Let channels be SD-aware")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20241203204920.232744-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the mentioned commit change for MPV mode, since in MPV mode the IB
device is shared between different core devices, so under this change
when moving both devices simultaneously to switchdev mode the IB device
removal and re-addition can race with itself causing unexpected behavior.
In such case do rescan_drivers() only once in order to add the ethernet
representor auxiliary device, and skip adding and removing IB devices.
Fixes: ab85ebf437 ("net/mlx5: E-switch, refactor eswitch mode change")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241203204920.232744-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Wei says:
====================
bnxt_en: support header page pool in queue API
Commit 7ed816be35 ("eth: bnxt: use page pool for head frags") added a
separate page pool for header frags. Now, frags are allocated from this
header page pool e.g. rxr->tpa_info.data.
The queue API did not properly handle rxr->tpa_info and so using the
queue API to i.e. reset any queues will result in pages being returned
to the incorrect page pool, causing inflight != 0 warnings.
Fix this bug by properly allocating/freeing tpa_info and copying/freeing
head_pool in the queue API implementation.
The 1st patch is a prep patch that refactors helpers out to be used by
the implementation patch later.
The 2nd patch is a drive-by refactor. Happy to take it out and re-send
to net-next if there are any objections.
The 3rd patch is the implementation patch that will properly alloc/free
rxr->tpa_info.
====================
Link: https://patch.msgid.link/20241204041022.56512-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 7ed816be35 ("eth: bnxt: use page pool for head frags") added a
page pool for header frags, which may be distinct from the existing pool
for the aggregation ring. Prior to this change, frags used in the TPA
ring rx_tpa were allocated from system memory e.g. napi_alloc_frag()
meaning their lifetimes were not associated with a page pool. They can
be returned at any time and so the queue API did not alloc or free
rx_tpa.
But now frags come from a separate head_pool which may be different to
page_pool. Without allocating and freeing rx_tpa, frags allocated from
the old head_pool may be returned to a different new head_pool which
causes a mismatch between the pp hold/release count.
Fix this problem by properly freeing and allocating rx_tpa in the queue
API implementation.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20241204041022.56512-4-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor bnxt_rx_ring_info->tpa_info operations into helpers that work
on a single tpa_info in prep for queue API using them.
There are 2 pairs of operations:
* bnxt_alloc_one_tpa_info()
* bnxt_free_one_tpa_info()
These alloc/free the tpa_info array itself.
* bnxt_alloc_one_tpa_info_data()
* bnxt_free_one_tpa_info_data()
These alloc/free the frags stored in tpa_info array.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20241204041022.56512-2-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver is currently using an ACL key block that is not supported by
Spectrum-4. This works because the driver is only using a single field
from this key block which is located in the same offset in the
equivalent Spectrum-4 key block.
The issue was discovered when the firmware started rejecting the use of
the unsupported key block. The change has been reverted to avoid
breaking users that only update their firmware.
Nonetheless, fix the issue by using the correct key block.
Fixes: 07ff135958 ("mlxsw: Introduce flex key elements for Spectrum-4")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/35e72c97bdd3bc414fb8e4d747e5fb5d26c29658.1733237440.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A bitset without mask in a _SET request means we want exactly the bits in
the bitset to be set. This works correctly for compact format but when
verbose format is parsed, ethnl_update_bitset32_verbose() only sets the
bits present in the request bitset but does not clear the rest. The commit
6699170376 ("ethtool: fix application of verbose no_mask bitset") fixes
this issue by clearing the whole target bitmap before we start iterating.
The solution proposed brought an issue with the behavior of the mod
variable. As the bitset is always cleared the old value will always
differ to the new value.
Fix it by adding a new function to compare bitmaps and a temporary variable
which save the state of the old bitmap.
Fixes: 6699170376 ("ethtool: fix application of verbose no_mask bitset")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20241202153358.1142095-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The aux_payload_buf allocation in SMB2 read is performed without ensuring
alignment, which could result in out-of-bounds (OOB) reads during
cryptographic operations such as crypto_xor or ghash. This patch aligns
the allocation of aux_payload_buf to prevent these issues.
(Note that to add this patch to stable would require modifications due
to recent patch "ksmbd: use __GFP_RETRY_MAYFAIL")
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
rhashtable does not provide stable walk, duplicated elements are
possible in case of resizing. I considered that checking for errors when
calling rhashtable_walk_next() was sufficient to detect the resizing.
However, rhashtable_walk_next() returns -EAGAIN only at the end of the
iteration, which is too late, because a gc work containing duplicated
elements could have been already scheduled for removal to the worker.
Add a u32 gc worker sequence number per set, bump it on every workqueue
run. Annotate gc worker sequence number on the expired element. Use it
to skip those already seen in this gc workqueue run.
Note that this new field is never reset in case gc transaction fails, so
next gc worker run on the expired element overrides it. Wraparound of gc
worker sequence number should not be an issue with stale gc worker
sequence number in the element, that would just postpone the element
removal in one gc run.
Note that it is not possible to use flags to annotate that element is
pending gc run to detect duplicates, given that gc transaction can be
invalidated in case of update from the control plane, therefore, not
allowing to clear such flag.
On x86_64, pahole reports no changes in the size of nft_rhash_elem.
Fixes: f6c383b8c3 ("netfilter: nf_tables: adapt set backend to use GC transaction API")
Reported-by: Laurent Fasnacht <laurent.fasnacht@proton.ch>
Tested-by: Laurent Fasnacht <laurent.fasnacht@proton.ch>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull LoongArch fixes from Huacai Chen:
"Fix bugs about EFI screen info, hugetlb pte clear and Lockdep-RCU
splat in KVM, plus some trival cleanups"
* tag 'loongarch-fixes-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Protect kvm_io_bus_{read,write}() with SRCU
LoongArch: KVM: Protect kvm_check_requests() with SRCU
LoongArch: BPF: Adjust the parameter of emit_jirl()
LoongArch: Add architecture specific huge_pte_clear()
LoongArch/irq: Use seq_put_decimal_ull_width() for decimal values
LoongArch: Fix reserving screen info memory for above-4G firmware
Since commit 771f712ba5 ("scsi: scsi_debug: Fix cmd duration
calculation"), ns_from_boot value is only evaluated in schedule_resp()
for polled requests.
However, ns_from_boot is also required for hrtimer support for when
ndelay is less than INCLUSIVE_TIMING_MAX_NS, so fix up the logic to
decide when to evaluate ns_from_boot.
Fixes: 771f712ba5 ("scsi: scsi_debug: Fix cmd duration calculation")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241202130045.2335194-1-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This partially reverts commit 812fe6420a ("scsi: storvsc: Handle
additional SRB status values").
HyperV does not support MAINTENANCE_IN resulting in FC passthrough
returning the SRB_STATUS_DATA_OVERRUN value. Now that
SRB_STATUS_DATA_OVERRUN is treated as an error, multipath ALUA paths go
into a faulty state as multipath ALUA submits RTPG commands via
MAINTENANCE_IN.
[ 3.215560] hv_storvsc 1d69d403-9692-4460-89f9-a8cbcc0f94f3:
tag#230 cmd 0xa3 status: scsi 0x0 srb 0x12 hv 0xc0000001
[ 3.215572] scsi 1:0:0:32: alua: rtpg failed, result 458752
Make MAINTENANCE_IN return success to avoid the error path as is
currently done with INQUIRY and MODE_SENSE.
Suggested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Cathy Avery <cavery@redhat.com>
Link: https://lore.kernel.org/r/20241127181324.3318443-1-cavery@redhat.com
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When the power mode change is successful but the power mode hasn't
actually changed, the post notification was missed. Similar to the
approach with hibernate/clock scale/hce enable, having pre/post
notifications in the same function will make it easier to maintain.
Additionally, supplement the description of power parameters for the
pwr_change_notify callback.
Fixes: 7eb584db73 ("ufs: refactor configuring power mode")
Cc: stable@vger.kernel.org #6.11.x
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20241122024943.30589-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix a use-after-free bug in sg_release(), detected by syzbot with KASAN:
BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30
kernel/locking/lockdep.c:5838
__mutex_unlock_slowpath+0xe2/0x750 kernel/locking/mutex.c:912
sg_release+0x1f4/0x2e0 drivers/scsi/sg.c:407
In sg_release(), the function kref_put(&sfp->f_ref, sg_remove_sfp) is
called before releasing the open_rel_lock mutex. The kref_put() call may
decrement the reference count of sfp to zero, triggering its cleanup
through sg_remove_sfp(). This cleanup includes scheduling deferred work
via sg_remove_sfp_usercontext(), which ultimately frees sfp.
After kref_put(), sg_release() continues to unlock open_rel_lock and may
reference sfp or sdp. If sfp has already been freed, this results in a
slab-use-after-free error.
Move the kref_put(&sfp->f_ref, sg_remove_sfp) call after unlocking the
open_rel_lock mutex. This ensures:
- No references to sfp or sdp occur after the reference count is
decremented.
- Cleanup functions such as sg_remove_sfp() and
sg_remove_sfp_usercontext() can safely execute without impacting the
mutex handling in sg_release().
The fix has been tested and validated by syzbot. This patch closes the
bug reported at the following syzkaller link and ensures proper
sequencing of resource cleanup and mutex operations, eliminating the
risk of use-after-free errors in sg_release().
Reported-by: syzbot+7efb5850a17ba6ce098b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7efb5850a17ba6ce098b
Tested-by: syzbot+7efb5850a17ba6ce098b@syzkaller.appspotmail.com
Fixes: cc833acbee ("sg: O_EXCL and other lock handling")
Signed-off-by: Suraj Sonawane <surajsonawane0215@gmail.com>
Link: https://lore.kernel.org/r/20241120125944.88095-1-surajsonawane0215@gmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
