mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-05-12 12:44:52 -04:00
bc7509446b456d6649afa60fce9104d169e94de1
18174 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
f3ddc438a2 |
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Nothing major, some left-overs from the recent merging window (MTE,
coco) and some newly found issues like the ptrace() ones.
- MTE/hugetlbfs:
- Set VM_MTE_ALLOWED in the arch code and remove it from the core
code for hugetlbfs mappings
- Fix copy_highpage() warning when the source is a huge page but
not MTE tagged, taking the wrong small page path
- drivers/virt/coco:
- Add the pKVM and Arm CCA drivers under the arm64 maintainership
- Fix the pkvm driver to fall back to ioremap() (and warn) if the
MMIO_GUARD hypercall fails
- Keep the Arm CCA driver default 'n' rather than 'm'
- A series of fixes for the arm64 ptrace() implementation,
potentially leading to the kernel consuming uninitialised stack
variables when PTRACE_SETREGSET is invoked with a length of 0
- Fix zone_dma_limit calculation when RAM starts below 4GB and
ZONE_DMA is capped to this limit
- Fix early boot warning with CONFIG_DEBUG_VIRTUAL=y triggered by a
call to page_to_phys() (from patch_map()) which checks pfn_valid()
before vmemmap has been set up
- Do not clobber bits 15:8 of the ASID used for TTBR1_EL1 and TLBI
ops when the kernel assumes 8-bit ASIDs but running under a
hypervisor on a system that implements 16-bit ASIDs (found running
Linux under Parallels on Apple M4)
- ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A as it
is using the same SMMU PMCG as HIP09 and suffers from the same
errata
- Add GCS to cpucap_is_possible(), missed in the recent merge"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: ptrace: fix partial SETREGSET for NT_ARM_GCS
arm64: ptrace: fix partial SETREGSET for NT_ARM_POE
arm64: ptrace: fix partial SETREGSET for NT_ARM_FPMR
arm64: ptrace: fix partial SETREGSET for NT_ARM_TAGGED_ADDR_CTRL
arm64: cpufeature: Add GCS to cpucap_is_possible()
coco: virt: arm64: Do not enable cca guest driver by default
arm64: mte: Fix copy_highpage() warning on hugetlb folios
arm64: Ensure bits ASID[15:8] are masked out when the kernel uses 8-bit ASIDs
ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A
MAINTAINERS: Add CCA and pKVM CoCO guest support to the ARM64 entry
drivers/virt: pkvm: Don't fail ioremap() call if MMIO_GUARD fails
arm64: patching: avoid early page_to_phys()
arm64: mm: Fix zone_dma_limit calculation
arm64: mte: set VM_MTE_ALLOWED for hugetlbfs at correct place
|
||
|
Linus Torvalds
|
896d8946da |
Merge tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can and netfilter.
Current release - regressions:
- rtnetlink: fix double call of rtnl_link_get_net_ifla()
- tcp: populate XPS related fields of timewait sockets
- ethtool: fix access to uninitialized fields in set RXNFC command
- selinux: use sk_to_full_sk() in selinux_ip_output()
Current release - new code bugs:
- net: make napi_hash_lock irq safe
- eth:
- bnxt_en: support header page pool in queue API
- ice: fix NULL pointer dereference in switchdev
Previous releases - regressions:
- core: fix icmp host relookup triggering ip_rt_bug
- ipv6:
- avoid possible NULL deref in modify_prefix_route()
- release expired exception dst cached in socket
- smc: fix LGR and link use-after-free issue
- hsr: avoid potential out-of-bound access in fill_frame_info()
- can: hi311x: fix potential use-after-free
- eth: ice: fix VLAN pruning in switchdev mode
Previous releases - always broken:
- netfilter:
- ipset: hold module reference while requesting a module
- nft_inner: incorrect percpu area handling under softirq
- can: j1939: fix skb reference counting
- eth:
- mlxsw: use correct key block on Spectrum-4
- mlx5: fix memory leak in mlx5hws_definer_calc_layout"
* tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
net :mana :Request a V2 response version for MANA_QUERY_GF_STAT
net: avoid potential UAF in default_operstate()
vsock/test: verify socket options after setting them
vsock/test: fix parameter types in SO_VM_SOCKETS_* calls
vsock/test: fix failures due to wrong SO_RCVLOWAT parameter
net/mlx5e: Remove workaround to avoid syndrome for internal port
net/mlx5e: SD, Use correct mdev to build channel param
net/mlx5: E-Switch, Fix switching to switchdev mode in MPV
net/mlx5: E-Switch, Fix switching to switchdev mode with IB device disabled
net/mlx5: HWS: Properly set bwc queue locks lock classes
net/mlx5: HWS: Fix memory leak in mlx5hws_definer_calc_layout
bnxt_en: handle tpa_info in queue API implementation
bnxt_en: refactor bnxt_alloc_rx_rings() to call bnxt_alloc_rx_agg_bmap()
bnxt_en: refactor tpa_info alloc/free into helpers
geneve: do not assume mac header is set in geneve_xmit_skb()
mlxsw: spectrum_acl_flex_keys: Use correct key block on Spectrum-4
ethtool: Fix wrong mod state in case of verbose and no_mask bitset
ipmr: tune the ipmr_can_free_table() checks.
netfilter: nft_set_hash: skip duplicated elements pending gc run
netfilter: ipset: Hold module reference while requesting a module
...
|
||
|
Linus Torvalds
|
42d52acfb1 |
Merge tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck: - Add support for exynosautov920 SoC - Add support for Airoha EN7851 watchdog - Add support for MT6735 TOPRGU/WDT - Delete the cpu5wdt driver - Always print when registering watchdog fails - Several other small fixes and improvements * tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits) watchdog: rti: of: honor timeout-sec property watchdog: s3c2410_wdt: add support for exynosautov920 SoC dt-bindings: watchdog: Document ExynosAutoV920 watchdog bindings watchdog: mediatek: Add support for MT6735 TOPRGU/WDT watchdog: mediatek: Make sure system reset gets asserted in mtk_wdt_restart() dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property dt-bindings: watchdog: Document Qualcomm QCS8300 docs: ABI: Fix spelling mistake in pretimeout_avaialable_governors Revert "watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs" watchdog: rzg2l_wdt: Power on the watchdog domain in the restart handler watchdog: Switch back to struct platform_driver::remove() watchdog: it87_wdt: add PWRGD enable quirk for Qotom QCML04 watchdog: da9063: Remove __maybe_unused notations watchdog: da9063: Do not use a global variable watchdog: Delete the cpu5wdt driver watchdog: Add support for Airoha EN7851 watchdog dt-bindings: watchdog: airoha: document watchdog for Airoha EN7581 watchdog: sl28cpld_wdt: don't print out if registering watchdog fails watchdog: rza_wdt: don't print out if registering watchdog fails watchdog: rti_wdt: don't print out if registering watchdog fails ... |
||
|
Will Deacon
|
9223059625 |
MAINTAINERS: Add CCA and pKVM CoCO guest support to the ARM64 entry
Commits |
||
|
Jakub Kicinski
|
c889aa2e7c |
MAINTAINERS: list PTP drivers under networking
PTP patches go via the netdev trees, add drivers/ptp/ to the networking entry so that get_maintainer.pl --scm lists those trees above Linus's tree. Thanks to the real entry using drivers/ptp/* the original entry will still be considered more specific / higher prio. Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://patch.msgid.link/20241130214100.125325-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
a14bf463e7 |
Merge tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c component probing support from Wolfram Sang: "Add OF component probing. Some devices are designed and manufactured with some components having multiple drop-in replacement options. These components are often connected to the mainboard via ribbon cables, having the same signals and pin assignments across all options. These may include the display panel and touchscreen on laptops and tablets, and the trackpad on laptops. Sometimes which component option is used in a particular device can be detected by some firmware provided identifier, other times that information is not available, and the kernel has to try to probe each device. Instead of a delicate dance between drivers and device tree quirks, this change introduces a simple I2C component probe function. For a given class of devices on the same I2C bus, it will go through all of them, doing a simple I2C read transfer and see which one of them responds. It will then enable the device that responds" * tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: fix typo in I2C OF COMPONENT PROBER of: base: Document prefix argument for of_get_next_child_with_prefix() i2c: Fix whitespace style issue arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail platform/chrome: Introduce device tree hardware prober i2c: of-prober: Add GPIO support to simple helpers i2c: of-prober: Add simple helpers for regulator support i2c: Introduce OF component probe function of: base: Add for_each_child_of_node_with_prefix() of: dynamic: Add of_changeset_update_prop_string |
||
|
Linus Torvalds
|
6a34dfa15d |
Merge tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada: - Add generic support for built-in boot DTB files - Enable TAB cycling for dialog buttons in nconfig - Fix issues in streamline_config.pl - Refactor Kconfig - Add support for Clang's AutoFDO (Automatic Feedback-Directed Optimization) - Add support for Clang's Propeller, a profile-guided optimization. - Change the working directory to the external module directory for M= builds - Support building external modules in a separate output directory - Enable objtool for *.mod.o and additional kernel objects - Use lz4 instead of deprecated lz4c - Work around a performance issue with "git describe" - Refactor modpost * tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (85 commits) kbuild: rename .tmp_vmlinux.kallsyms0.syms to .tmp_vmlinux0.syms gitignore: Don't ignore 'tags' directory kbuild: add dependency from vmlinux to resolve_btfids modpost: replace tdb_hash() with hash_str() kbuild: deb-pkg: add python3:native to build dependency genksyms: reduce indentation in export_symbol() modpost: improve error messages in device_id_check() modpost: rename alias symbol for MODULE_DEVICE_TABLE() modpost: rename variables in handle_moddevtable() modpost: move strstarts() to modpost.h modpost: convert do_usb_table() to a generic handler modpost: convert do_of_table() to a generic handler modpost: convert do_pnp_device_entry() to a generic handler modpost: convert do_pnp_card_entries() to a generic handler modpost: call module_alias_printf() from all do_*_entry() functions modpost: pass (struct module *) to do_*_entry() functions modpost: remove DEF_FIELD_ADDR_VAR() macro modpost: deduplicate MODULE_ALIAS() for all drivers modpost: introduce module_alias_printf() helper modpost: remove unnecessary check in do_acpi_entry() ... |
||
|
Linus Torvalds
|
0e287d31b6 |
Merge tag 'rtc-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni: "New drivers: - Amlogic A4 and A5 RTC - Marvell 88PM886 PMIC RTC - Renesas RTCA-3 for Renesas RZ/G3S Driver updates: - ab-eoz9: fix temperature and alarm support - cmos: improve locking behaviour - isl12022: add alarm support - m48t59: improve epoch handling - mt6359: add range - rzn1: fix BCD conversions and simplify driver" * tag 'rtc-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (38 commits) rtc: ab-eoz9: don't fail temperature reads on undervoltage notification rtc: rzn1: reduce register access rtc: rzn1: drop superfluous wday calculation m68k: mvme147, mvme16x: Adopt rtc-m48t59 platform driver rtc: brcmstb-waketimer: don't include 'pm_wakeup.h' directly rtc: m48t59: Use platform_data struct for year offset value rtc: ab-eoz9: fix abeoz9_rtc_read_alarm rtc: rv3028: fix RV3028_TS_COUNT type rtc: rzn1: update Michel's email rtc: rzn1: fix BCD to rtc_time conversion errors rtc: amlogic-a4: fix compile error rtc: amlogic-a4: drop error messages MAINTAINERS: Add an entry for Amlogic RTC driver rtc: support for the Amlogic on-chip RTC dt-bindings: rtc: Add Amlogic A4 and A5 RTC rtc: add driver for Marvell 88PM886 PMIC RTC rtc: check if __rtc_read_time was successful in rtc_timer_do_work() rtc: pcf8563: Switch to regmap rtc: pcf8563: Sort headers alphabetically rtc: abx80x: Fix WDT bit position of the status register ... |
||
|
Linus Torvalds
|
9d0ad04553 |
Merge tag 'ceph-for-6.13-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov: "A fix for the mount "device" string parser from Patrick and two cred reference counting fixups from Max, marked for stable. Also included a number of cleanups and a tweak to MAINTAINERS to avoid unnecessarily CCing netdev list" * tag 'ceph-for-6.13-rc1' of https://github.com/ceph/ceph-client: ceph: fix cred leak in ceph_mds_check_access() ceph: pass cred pointer to ceph_mds_auth_match() ceph: improve caps debugging output ceph: correct ceph_mds_cap_peer field name ceph: correct ceph_mds_cap_item field name ceph: miscellaneous spelling fixes ceph: Use strscpy() instead of strcpy() in __get_snap_name() ceph: Use str_true_false() helper in status_show() ceph: requalify some char pointers as const ceph: extract entity name from device id MAINTAINERS: exclude net/ceph from networking ceph: Remove fs/ceph deadcode libceph: Remove unused ceph_crypto_key_encode libceph: Remove unused ceph_osdc_watch_check libceph: Remove unused pagevec functions libceph: Remove unused ceph_pagelist functions |
||
|
Linus Torvalds
|
2eff01ee28 |
Merge tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/whatever driver subsystem updates from Greg KH:
"Here is the 'big and hairy' char/misc/iio and other small driver
subsystem updates for 6.13-rc1.
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible.
I think this is the tipping point, expect to see way more rust
drivers going forward now that these bindings are present. Next
merge window hopefully we will have pci and platform drivers
working, which will fully enable almost all driver subsystems to
start accepting (or at least getting) rust drivers.
This is the end result of a lot of work from a lot of people,
congrats to all of them for getting this far, you've proved many of
us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
All of these have been in linux-next for a while, with no other
reported issues other than that merge conflict"
* tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (401 commits)
mei: vsc: Fix typo "maintstepping" -> "mainstepping"
firmware: Switch back to struct platform_driver::remove()
misc: isl29020: Fix the wrong format specifier
scripts/tags.sh: Don't tag usages of DEFINE_MUTEX
fpga: Switch back to struct platform_driver::remove()
mei: vsc: Improve error logging in vsc_identify_silicon()
mei: vsc: Do not re-enable interrupt from vsc_tp_reset()
dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible
dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188
spmi: pmic-arb: fix return path in for_each_available_child_of_node()
iio: Move __private marking before struct element priv in struct iio_dev
docs: iio: ad7380: add adaq4370-4 and adaq4380-4
iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
iio: adc: ad7380: use local dev variable to shorten long lines
iio: adc: ad7380: fix oversampling formula
dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR
bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian
misc: atmel-ssc: Use of_property_present() for non-boolean properties
misc: keba: Add hardware dependency
...
|
||
|
Linus Torvalds
|
a0c1ca3934 |
Merge tag 'staging-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver changes for 6.13-rc1.
Lots of changes this merge cycle, drivers removed and drivers added.
Highlights include:
- removals of the following staging drivers due to no forward
progress and no one having either the hardware or the time/energy
to deal with them anymore:
- fieldbus
- gdm724x
- olpc_dcon
- rtl8712
- rts5208
- vt6655
- vt6656
If anyone has this hardware and wants to work on the drivers, it
can be an easy revert to get them back.
- addition of the gpib driver subsystem. Lots of drivers for really
old and semi-old interfaces to lab equipments. We expect lots of
churn in these drivers as they get cleaned up to "working" order.
These were added at the request of a user and the maintainer/author
of them is helping out with the effort
- loads and loads of tiny coding style cleanups for almost all
staging drivers. Too many to list, see the shortlog for details.
All of these have been in linux-next for a very long time with no
reported issues"
* tag 'staging-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (216 commits)
Staging: gpib: gpib_os.c - Remove unnecessary OOM message
staging: gpib: avoid unintended sign extension
staging: vchiq_debugfs: Use forward declarations
staging: vchiq_core: Rectify header include for vchiq_dump_state()
staging: vc04_services: Cleanup TODO entry
staging: most: Remove TODO contact information
staging: rtl8723bs: Remove TODO contact information
staging: sm750fb: Remove TODO contact information
staging: iio: Remove TODO file
staging: greybus: uart: Fix atomicity violation in get_serial_info()
staging: rtl8723bs: Remove unused function Efuse_GetCurrentSize
staging: rtl8723bs: Remove unused function efuse_WordEnableDataRead
staging: rtl8723bs: Remove function hal_EfusePgPacketWrite1ByteHeader
staging: rtl8723bs: Remove function hal_EfusePgPacketWrite2ByteHeader
staging: rtl8723bs: Remove unused function hal_EfusePgCheckAvailableAddr
staging: rtl8723bs: Remove unused function hal_EfuseConstructPGPkt
staging: rtl8723bs: Remove unused function hal_EfusePartialWriteCheck
staging: rtl8723bs: Remove unused function hal_EfusePgPacketWriteHeader
staging: rtl8723bs: Remove unused function hal_EfusePgPacketWriteData
staging: rtl8723bs: Remove unused function Hal_EfusePgPacketWrite_BT
...
|
||
|
Linus Torvalds
|
e33a6d83e1 |
Merge tag 'usb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.13-rc1. Overall, a pretty slow development cycle, the majority of the work going into the debugfs interface for the thunderbolt (i.e. USB4) code, to help with debugging the myrad ways that hardware vendors get their interfaces messed up. Other than that, here's the highlights: - thunderbolt changes and additions to debugfs interfaces - lots of device tree updates for new and old hardware - UVC configfs gadget updates and new apis for features - xhci driver updates and fixes - dwc3 driver updates and fixes - typec driver updates and fixes - lots of other small updates and fixes, full details in the shortlog All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (148 commits) usb: typec: tcpm: Add support for sink-bc12-completion-time-ms DT property dt-bindings: usb: maxim,max33359: add usage of sink bc12 time property dt-bindings: connector: Add time property for Sink BC12 detection completion usb: dwc3: gadget: Remove dwc3_request->needs_extra_trb usb: dwc3: gadget: Cleanup SG handling usb: dwc3: gadget: Fix looping of queued SG entries usb: dwc3: gadget: Fix checking for number of TRBs left usb: dwc3: ep0: Don't clear ep0 DWC3_EP_TRANSFER_STARTED Revert "usb: gadget: composite: fix OS descriptors w_value logic" usb: ehci-spear: fix call balance of sehci clk handling routines USB: make to_usb_device_driver() use container_of_const() USB: make to_usb_driver() use container_of_const() USB: properly lock dynamic id list when showing an id USB: make single lock for all usb dynamic id lists drivers/usb/storage: refactor min with min_t drivers/usb/serial: refactor min with min_t drivers/usb/musb: refactor min/max with min_t/max_t drivers/usb/mon: refactor min with min_t drivers/usb/misc: refactor min with min_t drivers/usb/host: refactor min/max with min_t/max_t ... |
||
|
Lukas Bulwahn
|
caf4bdb558 |
MAINTAINERS: fix typo in I2C OF COMPONENT PROBER
Commit |
||
|
Linus Torvalds
|
0ce9a5ffca |
Merge tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New hardware support:
- ST STM32MP25 combophy support
- Sparx5 support for lan969x serdes and updates to driver to support
this
- NXP PTN3222 eUSB2 to USB2 redriver
- Qualcomm SAR2130P eusb2 support, QCS8300 USB DW3 and QMP USB2
support, X1E80100 QMP PCIe PHY Gen4 support, QCS615 and QCS8300 QMP
UFS PHY support and SA8775P eDP PHY support
- Rockchip rk3576 usbdp and rk3576 usb2 phy support
- Binding for Microchip ATA6561 can phy
Updates:
- Freescale driver updates from hdmi support
- Conversion of rockchip rk3228 hdmi phy binding to yaml
- Broadcom usb2-phy deprecated support dropped and USB init array
update for BCM4908
- TI USXGMII mode support in J7200
- Switch back to platform_driver::remove() subsystem update"
* tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (59 commits)
phy: qcom: qmp: Fix lecacy-legacy typo
phy: lan969x-serdes: add support for lan969x serdes driver
dt-bindings: phy: sparx5: document lan969x
phy: sparx5-serdes: add support for branching on chip type
phy: sparx5-serdes: add indirection layer to register macros
phy: sparx5-serdes: add function for getting the CMU index
phy: sparx5-serdes: add ops to match data
phy: sparx5-serdes: add constant for the number of CMU's
phy: sparx5-serdes: add constants to match data
phy: sparx5-serdes: add support for private match data
phy: bcm-ns-usb2: drop support for old binding variant
dt-bindings: phy: bcm-ns-usb2-phy: drop deprecated variant
dt-bindings: phy: Add QMP UFS PHY compatible for QCS8300
dt-bindings: phy: qcom: snps-eusb2: Add SAR2130P compatible
dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561
phy: airoha: Fix REG_CSR_2L_RX{0,1}_REV0 definitions
phy: airoha: Fix REG_CSR_2L_JCPLL_SDM_HREN config in airoha_pcie_phy_init_ssc_jcpll()
phy: airoha: Fix REG_PCIE_PMA_TX_RESET config in airoha_pcie_phy_init_csr_2l()
phy: airoha: Fix REG_CSR_2L_PLL_CMN_RESERVE0 config in airoha_pcie_phy_init_clk_out()
phy: phy-rockchip-samsung-hdptx: Don't request RST_PHY/RST_ROPLL/RST_LCPLL
...
|
||
|
Linus Torvalds
|
7536c1a50e |
Merge tag 'dmaengine-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New hardware support:
- Qualcomm SAR2130P GPI dma support
- Sifive PIC64GX pdma support
- Rcar r7s72100 support and associated updates
Updates:
- STM32 DMA3 updates for packing/unpacking mode and prevention of
additional xfers
- Simplification of devm_acpi_dma_controller_register() and associate
cleanup including headers
- loongson prefix renames
- Switch back to platform_driver::remove() subsystem update"
* tag 'dmaengine-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: loongson2-apb: Rename the prefix ls2x to loongson2
dt-bindings: dma: sifive pdma: Add PIC64GX to compatibles
dmaengine: fix typo in the comment
dmaengine: stm32-dma3: clamp AXI burst using match data
dmaengine: stm32-dma3: prevent LL refactoring thanks to DT configuration
dt-bindings: dma: stm32-dma3: prevent additional transfers
dmaengine: stm32-dma3: refactor HW linked-list to optimize memory accesses
dmaengine: stm32-dma3: prevent pack/unpack thanks to DT configuration
dt-bindings: dma: stm32-dma3: prevent packing/unpacking mode
dmaengine: idxd: Move DSA/IAA device IDs to IDXD driver
dt-bindings: dma: qcom,gpi: Add SAR2130P compatible
dmaengine: Switch back to struct platform_driver::remove()
dmaengine: ep93xx: Fix unsigned compared against 0
dmaengine: acpi: Clean up headers
dmaengine: acpi: Simplify devm_acpi_dma_controller_register()
dmaengine: acpi: Drop unused devm_acpi_dma_controller_free()
dmaengine: sh: rz-dmac: add r7s72100 support
dt-bindings: dma: rz-dmac: Document RZ/A1H SoC
|
||
|
Chen-Yu Tsai
|
157ce8f381 |
i2c: Introduce OF component probe function
Some devices are designed and manufactured with some components having multiple drop-in replacement options. These components are often connected to the mainboard via ribbon cables, having the same signals and pin assignments across all options. These may include the display panel and touchscreen on laptops and tablets, and the trackpad on laptops. Sometimes which component option is used in a particular device can be detected by some firmware provided identifier, other times that information is not available, and the kernel has to try to probe each device. This change attempts to make the "probe each device" case cleaner. The current approach is to have all options added and enabled in the device tree. The kernel would then bind each device and run each driver's probe function. This works, but has been broken before due to the introduction of asynchronous probing, causing multiple instances requesting "shared" resources, such as pinmuxes, GPIO pins, interrupt lines, at the same time, with only one instance succeeding. Work arounds for these include moving the pinmux to the parent I2C controller, using GPIO hogs or pinmux settings to keep the GPIO pins in some fixed configuration, and requesting the interrupt line very late. Such configurations can be seen on the MT8183 Krane Chromebook tablets, and the Qualcomm sc8280xp-based Lenovo Thinkpad 13S. Instead of this delicate dance between drivers and device tree quirks, this change introduces a simple I2C component probe function. For a given class of devices on the same I2C bus, it will go through all of them, doing a simple I2C read transfer and see which one of them responds. It will then enable the device that responds. This requires some minor modifications in the existing device tree. The status for all the device nodes for the component options must be set to "fail-needs-probe". This makes it clear that some mechanism is needed to enable one of them, and also prevents the prober and device drivers running at the same time. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> |
||
|
Linus Torvalds
|
1746db26f8 |
Merge tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Make pci_stop_dev() and pci_destroy_dev() safe so concurrent
callers can't stop a device multiple times, even as we migrate from
the global pci_rescan_remove_lock to finer-grained locking (Keith
Busch)
- Improve pci_walk_bus() implementation by making it recursive and
moving locking up to avoid need for a 'locked' parameter (Keith
Busch)
- Unexport pci_walk_bus_locked(), which is only used internally by
the PCI core (Keith Busch)
- Detect some Thunderbolt chips that are built-in and hence
'trustworthy' by a heuristic since the 'ExternalFacingPort' and
'usb4-host-interface' ACPI properties are not quite enough (Esther
Shimanovich)
Resource management:
- Use PCI bus addresses (not CPU addresses) in 'ranges' properties
when building dynamic DT nodes so systems where PCI and CPU
addresses differ work correctly (Andrea della Porta)
- Tidy resource sizing and assignment with helpers to reduce
redundancy (Ilpo Järvinen)
- Improve pdev_sort_resources() 'bogus alignment' warning to be more
specific (Ilpo Järvinen)
Driver binding:
- Convert driver .remove_new() callbacks to .remove() again to finish
the conversion from returning 'int' to being 'void' (Sergio
Paracuellos)
- Export pcim_request_all_regions(), a managed interface to request
all BARs (Philipp Stanner)
- Replace pcim_iomap_regions_request_all() with
pcim_request_all_regions(), and pcim_iomap_table()[n] with
pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto
octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212
(Philipp Stanner)
- Remove the now unused pcim_iomap_regions_request_all() (Philipp
Stanner)
- Export pcim_iounmap_region(), a managed interface to unmap and
release a PCI BAR (Philipp Stanner)
- Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and
pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the
following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield,
cavium (Philipp Stanner)
Error handling:
- Add sysfs 'reset_subordinate' to reset the entire hierarchy below a
bridge; previously Secondary Bus Reset could only be used when
there was a single device below a bridge (Keith Busch)
- Warn if we reset a running device where the driver didn't register
pci_error_handlers notification callbacks (Keith Busch)
ASPM:
- Disable ASPM L1 before touching L1 PM Substates to follow the spec
closer and avoid a CPU load timeout on some platforms (Ajay
Agarwal)
- Set devices below Intel VMD to D0 before enabling ASPM L1 Substates
as required per spec for all L1 Substates changes (Jian-Hong Pan)
Power management:
- Enable starfive controller runtime PM before probing host bridge
(Mayank Rana)
- Enable runtime power management for host bridges (Krishna chaitanya
chundru)
Power control:
- Use of_platform_device_create() instead of of_platform_populate()
to create pwrctl platform devices so we can control it based on the
child nodes (Manivannan Sadhasivam)
- Create pwrctrl platform devices only if there's a relevant power
supply property (Manivannan Sadhasivam)
- Add device link from the pwrctl supplier to the PCI dev to ensure
pwrctl drivers are probed before the PCI dev driver; this avoids a
race where pwrctl could change device power state while the PCI
driver was active (Manivannan Sadhasivam)
- Find pwrctl device for removal with of_find_device_by_node()
instead of searching all children of the parent (Manivannan
Sadhasivam)
- Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller
('bwctrl') and hotplug files (Bjorn Helgaas)
Bandwidth control:
- Add read/modify/write locking for Link Control 2, which is used to
manage Link speed (Ilpo Järvinen)
- Extract Link Bandwidth Management Status check into
pcie_lbms_seen(), where it can be shared between the bandwidth
controller and quirks that use it to help retrain failed links
(Ilpo Järvinen)
- Re-add Link Bandwidth notification support with updates to address
the reasons it was previously reverted (Alexandru Gagniuc, Ilpo
Järvinen)
- Add pcie_set_target_speed() and related functionality so drivers
can manage PCIe Link speed based on thermal or other constraints
(Ilpo Järvinen)
- Add a thermal cooling driver to throttle PCIe Links via the
existing thermal management framework (Ilpo Järvinen)
- Add a userspace selftest for the PCIe bandwidth controller (Ilpo
Järvinen)
PCI device hotplug:
- Add hotplug controller driver for Marvell OCTEON multi-function
device where function 0 has a management console interface to
enable/disable and provision various personalities for the other
functions (Shijith Thotton)
- Retain a reference to the pci_bus for the lifetime of a pci_slot to
avoid a use-after-free when the thunderbolt driver resets USB4 host
routers on boot, causing hotplug remove/add of downstream docks or
other devices (Lukas Wunner)
- Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test
(Guilherme Giacomo Simoes)
- Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET)
- Use pci_bus_read_dev_vendor_id() instead of hand-coded presence
detection in cpqphp (Ilpo Järvinen)
- Simplify cpqphp enumeration, which is already simple-minded and
doesn't handle devices below hot-added bridges (Ilpo Järvinen)
Virtualization:
- Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS
capability but do isolate functions as though PCI_ACS_RR and
PCI_ACS_CR were set, so the functions can be in independent IOMMU
groups (Mengyuan Lou)
TLP Processing Hints (TPH):
- Add and document TLP Processing Hints (TPH) support so drivers can
enable and disable TPH and the kernel can save/restore TPH
configuration (Wei Huang)
- Add TPH Steering Tag support so drivers can retrieve Steering Tag
values associated with specific CPUs via an ACPI _DSM to improve
performance by directing DMA writes closer to their consumers (Wei
Huang)
Data Object Exchange (DOE):
- Wait up to 1 second for DOE Busy bit to clear before writing a
request to the mailbox to avoid failures if the mailbox is still
busy from a previous transfer (Gregory Price)
Endpoint framework:
- Skip attempts to allocate from endpoint controller memory window if
the requested size is larger than the window (Damien Le Moal)
- Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to
handle controller-specific size and alignment constraints, and add
test cases to the endpoint test driver (Damien Le Moal)
- Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can
observe DWC-specific alignment requirements (Damien Le Moal)
- Synchronously cancel command handler work in endpoint test before
cleaning up DMA and BARs (Damien Le Moal)
- Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas
Cassel)
- Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent
(Niklas Cassel)
- Avoid NULL dereference if Modem Host Interface Endpoint lacks
'mmio' DT property (Zhongqiu Han)
- Release PCI domain ID of Endpoint controller parent (not controller
itself) and before unregistering the controller, to avoid
use-after-free (Zijun Hu)
- Clear secondary (not primary) EPC in pci_epc_remove_epf() when
removing the secondary controller associated with an NTB (Zijun Hu)
Cadence PCIe controller driver:
- Lower severity of 'phy-names' message (Bartosz Wawrzyniak)
Freescale i.MX6 PCIe controller driver:
- Fix suspend/resume support on i.MX6QDL, which has a hardware
erratum that prevents use of L2 (Stefan Eichenberger)
Intel VMD host bridge driver:
- Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 DT binding to require the exact number of
clocks for each SoC (Fei Shao)
- Add support for DT 'max-link-speed' and 'num-lanes' properties to
restrict the link speed and width (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add DT and driver support for using either of the two PolarFire
Root Ports (Conor Dooley)
NVIDIA Tegra194 PCIe controller driver:
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
Qualcomm PCIe controller driver:
- Add qcom SAR2130P DT binding with an additional clock (Dmitry
Baryshkov)
- Enable MSI interrupts if 'global' IRQ is supported, since a
previous commit unintentionally masked them (Manivannan Sadhasivam)
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
- Add DT binding and driver support for IPQ9574, with Synopsys IP
v5.80a and Qcom IP 1.27.0 (devi priya)
- Move the OPP "operating-points-v2" table from the
qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it
can be used by other Qcom platforms (Qiang Yu)
- Add 'global' SPI interrupt for events like link-up, link-down to
qcom,pcie-x1e80100 DT binding so we can start enumeration when the
link comes up (Qiang Yu)
- Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned
to support this (Qiang Yu)
- Add ops_1_21_0 for SC8280X family SoC, which doesn't use the
'iommu-map' DT property and doesn't need BDF-to-SID translation
(Qiang Yu)
Rockchip PCIe controller driver:
- Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint
.align value (Damien Le Moal)
- When unmapping an endpoint window, compute the region index instead
of searching for it, and verify that the address was mapped (Damien
Le Moal)
- When mapping an endpoint window, verify that the address hasn't
been mapped already (Damien Le Moal)
- Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal)
- Fix MSI IRQ data mapping to observe the alignment constraint, which
fixes intermittent page faults in memcpy_toio() and memcpy_fromio()
(Damien Le Moal)
- Rename rockchip_pcie_parse_ep_dt() to
rockchip_pcie_ep_get_resources() for consistency with similar DT
interfaces (Damien Le Moal)
- Skip the unnecessary link train in rockchip_pcie_ep_probe() and do
it only in the endpoint start operation (Damien Le Moal)
- Implement pci_epc_ops.stop_link() to disable link training and
controller configuration (Damien Le Moal)
- Attempt link training at 5 GT/s when both partners support it
(Damien Le Moal)
- Add a handler for PERST# signal so we can detect host-initiated
resets and start link training after PERST# is deasserted (Damien
Le Moal)
Synopsys DesignWare PCIe controller driver:
- Clear outbound address on unmap so dw_pcie_find_index() won't match
an ATU index that was already unmapped (Damien Le Moal)
- Use of_property_present() instead of of_property_read_bool() when
testing for presence of non-boolean DT properties (Rob Herring)
- Advertise 1MB size if endpoint supports Resizable BARs, which was
inadvertently lost in v6.11 (Niklas Cassel)
TI J721E PCIe driver:
- Add PCIe support for J722S SoC (Siddharth Vadapalli)
- Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100
us), before deasserting PERST# to ensure power and refclk are
stable (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root
Complex mode (Kishon Vijay Abraham I)
- Try to avoid unrecoverable SError for attempts to issue config
transactions when the link is down; this is racy but the best we
can do (Kishon Vijay Abraham I)
Miscellaneous:
- Reorganize kerneldoc parameter names to match order in function
signature (Julia Lawall)
- Fix sysfs reset_method_store() memory leak (Todd Kjos)
- Simplify pci_create_slot() (Ilpo Järvinen)
- Fix incorrect printf format specifiers in pcitest (Luo Yifan)"
* tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits)
PCI: rockchip-ep: Handle PERST# signal in EP mode
PCI: rockchip-ep: Improve link training
PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
PCI: rockchip-ep: Refactor endpoint link training enable
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
PCI: rockchip-ep: Fix MSI IRQ data mapping
PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation
PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
PCI: rockchip-ep: Use a macro to define EP controller .align feature
PCI: rockchip-ep: Fix address translation unit programming
PCI/pwrctrl: Rename pwrctrl functions and structures
PCI/pwrctrl: Rename pwrctl files to pwrctrl
PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers
PCI/pwrctl: Create pwrctl device only if at least one power supply is present
PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
tools: PCI: Fix incorrect printf format specifiers
...
|
||
|
Rong Xu
|
d5dc958361 |
kbuild: Add Propeller configuration for kernel build
Add the build support for using Clang's Propeller optimizer. Like AutoFDO, Propeller uses hardware sampling to gather information about the frequency of execution of different code paths within a binary. This information is then used to guide the compiler's optimization decisions, resulting in a more efficient binary. The support requires a Clang compiler LLVM 19 or later, and the create_llvm_prof tool (https://github.com/google/autofdo/releases/tag/v0.30.1). This commit is limited to x86 platforms that support PMU features like LBR on Intel machines and AMD Zen3 BRS. Here is an example workflow for building an AutoFDO+Propeller optimized kernel: 1) Build the kernel on the host machine, with AutoFDO and Propeller build config CONFIG_AUTOFDO_CLANG=y CONFIG_PROPELLER_CLANG=y then $ make LLVM=1 CLANG_AUTOFDO_PROFILE=<autofdo_profile> “<autofdo_profile>” is the profile collected when doing a non-Propeller AutoFDO build. This step builds a kernel that has the same optimization level as AutoFDO, plus a metadata section that records basic block information. This kernel image runs as fast as an AutoFDO optimized kernel. 2) Install the kernel on test/production machines. 3) Run the load tests. The '-c' option in perf specifies the sample event period. We suggest using a suitable prime number, like 500009, for this purpose. For Intel platforms: $ perf record -e BR_INST_RETIRED.NEAR_TAKEN:k -a -N -b -c <count> \ -o <perf_file> -- <loadtest> For AMD platforms: The supported system are: Zen3 with BRS, or Zen4 with amd_lbr_v2 # To see if Zen3 support LBR: $ cat proc/cpuinfo | grep " brs" # To see if Zen4 support LBR: $ cat proc/cpuinfo | grep amd_lbr_v2 # If the result is yes, then collect the profile using: $ perf record --pfm-events RETIRED_TAKEN_BRANCH_INSTRUCTIONS:k -a \ -N -b -c <count> -o <perf_file> -- <loadtest> 4) (Optional) Download the raw perf file to the host machine. 5) Generate Propeller profile: $ create_llvm_prof --binary=<vmlinux> --profile=<perf_file> \ --format=propeller --propeller_output_module_name \ --out=<propeller_profile_prefix>_cc_profile.txt \ --propeller_symorder=<propeller_profile_prefix>_ld_profile.txt “create_llvm_prof” is the profile conversion tool, and a prebuilt binary for linux can be found on https://github.com/google/autofdo/releases/tag/v0.30.1 (can also build from source). "<propeller_profile_prefix>" can be something like "/home/user/dir/any_string". This command generates a pair of Propeller profiles: "<propeller_profile_prefix>_cc_profile.txt" and "<propeller_profile_prefix>_ld_profile.txt". 6) Rebuild the kernel using the AutoFDO and Propeller profile files. CONFIG_AUTOFDO_CLANG=y CONFIG_PROPELLER_CLANG=y and $ make LLVM=1 CLANG_AUTOFDO_PROFILE=<autofdo_profile> \ CLANG_PROPELLER_PROFILE_PREFIX=<propeller_profile_prefix> Co-developed-by: Han Shen <shenhan@google.com> Signed-off-by: Han Shen <shenhan@google.com> Signed-off-by: Rong Xu <xur@google.com> Suggested-by: Sriraman Tallam <tmsriram@google.com> Suggested-by: Krzysztof Pszeniczny <kpszeniczny@google.com> Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Suggested-by: Stephane Eranian <eranian@google.com> Tested-by: Yonghong Song <yonghong.song@linux.dev> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Kees Cook <kees@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
||
|
Linus Torvalds
|
798bb342e0 |
Merge tag 'rust-6.13' of https://github.com/Rust-for-Linux/linux
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Enable a series of lints, including safety-related ones, e.g. the
compiler will now warn about missing safety comments, as well as
unnecessary ones. How safety documentation is organized is a
frequent source of review comments, thus having the compiler guide
new developers on where they are expected (and where not) is very
nice.
- Start using '#[expect]': an interesting feature in Rust (stabilized
in 1.81.0) that makes the compiler warn if an expected warning was
_not_ emitted. This is useful to avoid forgetting cleaning up
locally ignored diagnostics ('#[allow]'s).
- Introduce '.clippy.toml' configuration file for Clippy, the Rust
linter, which will allow us to tweak its behaviour. For instance,
our first use cases are declaring a disallowed macro and, more
importantly, enabling the checking of private items.
- Lints-related fixes and cleanups related to the items above.
- Migrate from 'receiver_trait' to 'arbitrary_self_types': to get the
kernel into stable Rust, one of the major pieces of the puzzle is
the support to write custom types that can be used as 'self', i.e.
as receivers, since the kernel needs to write types such as 'Arc'
that common userspace Rust would not. 'arbitrary_self_types' has
been accepted to become stable, and this is one of the steps
required to get there.
- Remove usage of the 'new_uninit' unstable feature.
- Use custom C FFI types. Includes a new 'ffi' crate to contain our
custom mapping, instead of using the standard library 'core::ffi'
one. The actual remapping will be introduced in a later cycle.
- Map '__kernel_{size_t,ssize_t,ptrdiff_t}' to 'usize'/'isize'
instead of 32/64-bit integers.
- Fix 'size_t' in bindgen generated prototypes of C builtins.
- Warn on bindgen < 0.69.5 and libclang >= 19.1 due to a double issue
in the projects, which we managed to trigger with the upcoming
tracepoint support. It includes a build test since some
distributions backported the fix (e.g. Debian -- thanks!). All
major distributions we list should be now OK except Ubuntu non-LTS.
'macros' crate:
- Adapt the build system to be able run the doctests there too; and
clean up and enable the corresponding doctests.
'kernel' crate:
- Add 'alloc' module with generic kernel allocator support and remove
the dependency on the Rust standard library 'alloc' and the
extension traits we used to provide fallible methods with flags.
Add the 'Allocator' trait and its implementations '{K,V,KV}malloc'.
Add the 'Box' type (a heap allocation for a single value of type
'T' that is also generic over an allocator and considers the
kernel's GFP flags) and its shorthand aliases '{K,V,KV}Box'. Add
'ArrayLayout' type. Add 'Vec' (a contiguous growable array type)
and its shorthand aliases '{K,V,KV}Vec', including iterator
support.
For instance, now we may write code such as:
let mut v = KVec::new();
v.push(1, GFP_KERNEL)?;
assert_eq!(&v, &[1]);
Treewide, move as well old users to these new types.
- 'sync' module: add global lock support, including the
'GlobalLockBackend' trait; the 'Global{Lock,Guard,LockedBy}' types
and the 'global_lock!' macro. Add the 'Lock::try_lock' method.
- 'error' module: optimize 'Error' type to use 'NonZeroI32' and make
conversion functions public.
- 'page' module: add 'page_align' function.
- Add 'transmute' module with the existing 'FromBytes' and 'AsBytes'
traits.
- 'block::mq::request' module: improve rendered documentation.
- 'types' module: extend 'Opaque' type documentation and add simple
examples for the 'Either' types.
drm/panic:
- Clean up a series of Clippy warnings.
Documentation:
- Add coding guidelines for lints and the '#[expect]' feature.
- Add Ubuntu to the list of distributions in the Quick Start guide.
MAINTAINERS:
- Add Danilo Krummrich as maintainer of the new 'alloc' module.
And a few other small cleanups and fixes"
* tag 'rust-6.13' of https://github.com/Rust-for-Linux/linux: (82 commits)
rust: alloc: Fix `ArrayLayout` allocations
docs: rust: remove spurious item in `expect` list
rust: allow `clippy::needless_lifetimes`
rust: warn on bindgen < 0.69.5 and libclang >= 19.1
rust: use custom FFI integer types
rust: map `__kernel_size_t` and friends also to usize/isize
rust: fix size_t in bindgen prototypes of C builtins
rust: sync: add global lock support
rust: macros: enable the rest of the tests
rust: macros: enable paste! use from macro_rules!
rust: enable macros::module! tests
rust: kbuild: expand rusttest target for macros
rust: types: extend `Opaque` documentation
rust: block: fix formatting of `kernel::block::mq::request` module
rust: macros: fix documentation of the paste! macro
rust: kernel: fix THIS_MODULE header path in ThisModule doc comment
rust: page: add Rust version of PAGE_ALIGN
rust: helpers: remove unnecessary header includes
rust: exports: improve grammar in commentary
drm/panic: allow verbose version check
...
|
||
|
Linus Torvalds
|
445d9f05fa |
Merge tag 'nfsd-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever: "Jeff Layton contributed a scalability improvement to NFSD's NFSv4 backchannel session implementation. This improvement is intended to increase the rate at which NFSD can safely recall NFSv4 delegations from clients, to avoid the need to revoke them. Revoking requires a slow state recovery process. A wide variety of bug fixes and other incremental improvements make up the bulk of commits in this series. As always I am grateful to the NFSD contributors, reviewers, testers, and bug reporters who participated during this cycle" * tag 'nfsd-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (72 commits) nfsd: allow for up to 32 callback session slots nfs_common: must not hold RCU while calling nfsd_file_put_local nfsd: get rid of include ../internal.h nfsd: fix nfs4_openowner leak when concurrent nfsd4_open occur NFSD: Add nfsd4_copy time-to-live NFSD: Add a laundromat reaper for async copy state NFSD: Block DESTROY_CLIENTID only when there are ongoing async COPY operations NFSD: Handle an NFS4ERR_DELAY response to CB_OFFLOAD NFSD: Free async copy information in nfsd4_cb_offload_release() NFSD: Fix nfsd4_shutdown_copy() NFSD: Add a tracepoint to record canceled async COPY operations nfsd: make nfsd4_session->se_flags a bool nfsd: remove nfsd4_session->se_bchannel nfsd: make use of warning provided by refcount_t nfsd: Don't fail OP_SETCLIENTID when there are too many clients. svcrdma: fix miss destroy percpu_counter in svc_rdma_proc_init() xdrgen: Remove program_stat_to_errno() call sites xdrgen: Update the files included in client-side source code xdrgen: Remove check for "nfs_ok" in C templates xdrgen: Remove tracepoint call site ... |
||
|
Linus Torvalds
|
0637a68b9c |
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, lpfc, hisi_sas, st). Amazingly enough, no core changes with the biggest set of driver changes being ufs (which conflicted with it's own fixes a bit, hence the merges) and the rest being minor fixes and updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (97 commits) scsi: st: New session only when Unit Attention for new tape scsi: st: Add MTIOCGET and MTLOAD to ioctls allowed after device reset scsi: st: Don't modify unknown block number in MTIOCGET scsi: ufs: core: Restore SM8650 support scsi: sun3: Mark driver struct with __refdata to prevent section mismatch scsi: sg: Enable runtime power management scsi: qedi: Fix a possible memory leak in qedi_alloc_and_init_sb() scsi: qedf: Fix a possible memory leak in qedf_alloc_and_init_sb() scsi: fusion: Remove unused variable 'rc' scsi: bfa: Fix use-after-free in bfad_im_module_exit() scsi: esas2r: Remove unused esas2r_build_cli_req() scsi: target: Fix incorrect function name in pscsi_create_type_disk() scsi: ufs: Replace deprecated PCI functions scsi: Switch back to struct platform_driver::remove() scsi: pm8001: Increase request sg length to support 4MiB requests scsi: pm8001: Initialize devices in pm8001_alloc_dev() scsi: pm8001: Use module param to set pcs event log severity scsi: ufs: ufs-mediatek: Configure individual LU queue flags scsi: MAINTAINERS: Update UFS Exynos entry scsi: lpfc: Copyright updates for 14.4.0.6 patches ... |
||
|
Linus Torvalds
|
2c22dc1ee3 |
Merge tag 'mailbox-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar: "Common: - switch back from remove_new() to remove() callback imx: - fix format specifier zynqmp: - setup IPI for each child node thead: - Add th1520 driver and bindings qcom: - add SM8750 and SAR2130p compatibles - fix expected clocks for callbacks - use IRQF_NO_SUSPEND for cpucp mtk-cmdq: - switch to __pm_runtime_put_autosuspend() - fix alloc size of clocks mpfs: - fix reg properties ti-msgmgr: - don't use of_match_ptr helper - enable COMPILE_TEST build pcc: - consider the PCC_ACK_FLAG arm_mhuv2: - fix non-fatal improper reuse of variable" * tag 'mailbox-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: mailbox: pcc: Check before sending MCTP PCC response ACK mailbox: Switch back to struct platform_driver::remove() mailbox: imx: Modify the incorrect format specifier mailbox: arm_mhuv2: clean up loop in get_irq_chan_comb() mailbox: zynqmp: setup IPI for each valid child node dt-bindings: mailbox: Add thead,th1520-mailbox bindings mailbox: Introduce support for T-head TH1520 Mailbox driver mailbox: mtk-cmdq: fix wrong use of sizeof in cmdq_get_clocks() dt-bindings: mailbox: qcom-ipcc: Add SM8750 dt-bindings: mailbox: qcom,apcs-kpss-global: correct expected clocks for fallbacks dt-bindings: mailbox: qcom-ipcc: Add SAR2130P compatible mailbox: ti-msgmgr: Allow building under COMPILE_TEST mailbox: ti-msgmgr: Remove use of of_match_ptr() helper mailbox: qcom-cpucp: Mark the irq with IRQF_NO_SUSPEND flag mailbox: mtk-cmdq-mailbox: Switch to __pm_runtime_put_autosuspend() mailbox: mpfs: support new, syscon based, devicetree configuration dt-bindings: mailbox: mpfs: fix reg properties |
||
|
Linus Torvalds
|
2d32fba02e |
Merge tag 'pinctrl-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time.
New drivers:
- Xlinix Versal pin control driver
- Ocelot LAN969x pin control driver
- T-Head TH1520 RISC-V SoC pin control driver
- Qualcomm SM8750, IPQ5424, QCS8300, SAR2130P and QCS615 SoC pin
control drivers
- Qualcomm SM8750 LPASS (low power audio subsystem) pin control
driver
- Qualcomm PM8937 mixsig IC pin control support, GPIO and MPP
(multi-purpose-pin)
- Samsung Exynos8895 and Exynos9810 SoC pin control driver
- SpacemiT K1 SoC pin control driver
- Airhoa EN7581 IC pin control driver
Improvements:
- The Renesas subdriver now supports schmitt-trigger and open drain
pin configurations if the hardware supports it
- Support GPIOF and GPIOG banks in the Aspeed G6 SoC
- Support the DSW community in the Intel Elkhartlake SoC"
* tag 'pinctrl-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits)
pinctrl: airoha: Use unsigned long for bit search
pinctrl: k210: Undef K210_PC_DEFAULT
pinctrl: qcom: spmi: fix debugfs drive strength
pinctrl: qcom: Add sm8750 pinctrl driver
dt-bindings: pinctrl: qcom: Add sm8750 pinctrl
pinctrl: cy8c95x0: remove unneeded goto labels
pinctrl: cy8c95x0: embed iterator to the for-loop
pinctrl: cy8c95x0: Use temporary variable for struct device
pinctrl: cy8c95x0: use flexible sleeping in reset function
pinctrl: cy8c95x0: switch to using devm_regulator_get_enable()
pinctrl: cy8c95x0: Use 2-argument strscpy()
dt-bindings: pinctrl: sx150xq: allow gpio line naming
pinctrl: single: add marvell,pxa1908-padconf compatible
dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible
dt-bindings: pinctrl: correct typo of description for cv1800
pinctrl: qcom: spmi-mpp: Add PM8937 compatible
dt-bindings: pinctrl: qcom,pmic-mpp: Document PM8937 compatible
pinctrl: qcom-pmic-gpio: add support for PM8937
dt-bindings: pinctrl: qcom,pmic-gpio: add PM8937
pinctrl: Use of_property_present() for non-boolean properties
...
|
||
|
Linus Torvalds
|
70dbb12e95 |
Merge tag 'i2c-for-6.13-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
"Andi was super busy the last weeks, so this pull requests contains one
series (nomadik) and a number of smaller additions which were ready to
go but nearly overlooked.
New feature support:
- Added support for frequencies up to 3.4 MHz on Nomadik I2C
- DesignWare now accounts for bus capacitance and clock optimisation
(declared as new parameters in the binding) to improve the
calculation of signal rise and fall times (t_high and t_low)
New Hardware support:
- DWAPB I2C controller on FUJITSU-MONAKA (new ACPI HID)
- Allwinner A523 (new compatible ID)
- Mobileye EyeQ6H (new compatible ID)"
* tag 'i2c-for-6.13-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: transfer i2c-aspeed maintainership from Brendan to Ryan
i2c: designware: determine HS tHIGH and tLOW based on HW parameters
dt-bindings: i2c: snps,designware-i2c: declare bus capacitance and clk freq optimized
i2c: nomadik: support >=1MHz speed modes
i2c: nomadik: fix BRCR computation
i2c: nomadik: support Mobileye EyeQ6H I2C controller
i2c: nomadik: switch from of_device_is_compatible() to of_match_device()
dt-bindings: i2c: nomadik: support 400kHz < clock-frequency <= 3.4MHz
dt-bindings: i2c: nomadik: add mobileye,eyeq6h-i2c bindings
dt-bindings: i2c: mv64xxx: Add Allwinner A523 compatible string
i2c: designware: Add ACPI HID for DWAPB I2C controller on FUJITSU-MONAKA
i2c: qup: use generic device property accessors
|
||
|
Linus Torvalds
|
f5f4745a7f |
Merge tag 'mm-nonmm-stable-2024-11-24-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- The series "resource: A couple of cleanups" from Andy Shevchenko
performs some cleanups in the resource management code
- The series "Improve the copy of task comm" from Yafang Shao addresses
possible race-induced overflows in the management of
task_struct.comm[]
- The series "Remove unnecessary header includes from
{tools/}lib/list_sort.c" from Kuan-Wei Chiu adds some cleanups and a
small fix to the list_sort library code and to its selftest
- The series "Enhance min heap API with non-inline functions and
optimizations" also from Kuan-Wei Chiu optimizes and cleans up the
min_heap library code
- The series "nilfs2: Finish folio conversion" from Ryusuke Konishi
finishes off nilfs2's folioification
- The series "add detect count for hung tasks" from Lance Yang adds
more userspace visibility into the hung-task detector's activity
- Apart from that, singelton patches in many places - please see the
individual changelogs for details
* tag 'mm-nonmm-stable-2024-11-24-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits)
gdb: lx-symbols: do not error out on monolithic build
kernel/reboot: replace sprintf() with sysfs_emit()
lib: util_macros_kunit: add kunit test for util_macros.h
util_macros.h: fix/rework find_closest() macros
Improve consistency of '#error' directive messages
ocfs2: fix uninitialized value in ocfs2_file_read_iter()
hung_task: add docs for hung_task_detect_count
hung_task: add detect count for hung tasks
dma-buf: use atomic64_inc_return() in dma_buf_getfile()
fs/proc/kcore.c: fix coccinelle reported ERROR instances
resource: avoid unnecessary resource tree walking in __region_intersects()
ocfs2: remove unused errmsg function and table
ocfs2: cluster: fix a typo
lib/scatterlist: use sg_phys() helper
checkpatch: always parse orig_commit in fixes tag
nilfs2: convert metadata aops from writepage to writepages
nilfs2: convert nilfs_recovery_copy_block() to take a folio
nilfs2: convert nilfs_page_count_clean_buffers() to take a folio
nilfs2: remove nilfs_writepage
nilfs2: convert checkpoint file to be folio-based
...
|
||
|
Linus Torvalds
|
7f4f3b14e8 |
Merge tag 'trace-rust-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull rust trace event support from Steven Rostedt: "Allow Rust code to have trace events Trace events is a popular way to debug what is happening inside the kernel or just to find out what is happening. Rust code is being added to the Linux kernel but it currently does not support the tracing infrastructure. Add support of trace events inside Rust code" * tag 'trace-rust-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: rust: jump_label: skip formatting generated file jump_label: rust: pass a mut ptr to `static_key_count` samples: rust: fix `rust_print` build making it a combined module rust: add arch_static_branch jump_label: adjust inline asm to be consistent rust: samples: add tracepoint to Rust sample rust: add tracepoint support rust: add static_branch_unlikely for static_key_false |
||
|
Linus Torvalds
|
36843bfbf7 |
Merge tag 'hardening-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Disable __counted_by in Clang < 19.1.3 (Jan Hendrik Farr)
- string_helpers: Silence output truncation warning (Bartosz
Golaszewski)
- compiler.h: Avoid needing BUILD_BUG_ON_ZERO() (Philipp Reisner)
- MAINTAINERS: Add kernel hardening keywords __counted_by{_le|_be}
(Thorsten Blum)
* tag 'hardening-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Compiler Attributes: disable __counted_by for clang < 19.1.3
compiler.h: Fix undefined BUILD_BUG_ON_ZERO()
lib: string_helpers: silence snprintf() output truncation warning
MAINTAINERS: Add kernel hardening keywords __counted_by{_le|_be}
|
||
|
Bjorn Helgaas
|
ce1deca962 |
Merge branch 'pci/pwrctl'
- Use of_platform_device_create() instead of of_platform_populate() to create pwrctl platform devices so we can control it based on the child nodes (Manivannan Sadhasivam) - Create pwrctrl platform devices only if there's a relevant power supply property (Manivannan Sadhasivam) - Add device link from the pwrctl supplier to the PCI dev to ensure pwrctl drivers are probed before the PCI dev driver; this avoids a race where pwrctl could change device power state while the PCI driver was active (Manivannan Sadhasivam) - Find pwrctl device for removal with of_find_device_by_node() instead of searching all children of the parent (Manivannan Sadhasivam) - Rename 'pwrctl' to 'pwrctrl' to use the same 'ctrl' suffix as 'bwctrl' and other PCI files to reduce confusion (Bjorn Helgaas) * pci/pwrctl: PCI/pwrctrl: Rename pwrctrl functions and structures PCI/pwrctrl: Rename pwrctl files to pwrctrl PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers PCI/pwrctl: Create pwrctl device only if at least one power supply is present PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices # Conflicts: # drivers/pci/bus.c # drivers/pci/remove.c |
||
|
Bjorn Helgaas
|
665e4a3456 |
Merge branch 'pci/hotplug-octeon'
- Add hotplug controller driver for Marvell OCTEON multi-function device where function 0 has a management console interface to enable/disable and provision various personalities for the other functions (Shijith Thotton) * pci/hotplug-octeon: PCI: hotplug: Add OCTEON PCI hotplug controller driver |
||
|
Linus Torvalds
|
3e51108c72 |
Merge tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: - support for NT36672A touchscreen added to novatek-nvt-ts driver - a change to ads7846 driver to prevent XPT2046 from locking up - a change switching platform input dirves back to using remove() method (from remove_new()) - updates to a number of input drivers to use the new cleanup facilities (__free(...), guard(), and scoped-guard()) which ensure that the resources and locks are released properly and automatically - other assorted driver cleanups and fixes. * tag 'input-for-v6.13-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (109 commits) Input: mpr121 - use devm_regulator_get_enable_read_voltage() Input: sun4i-lradc-keys - don't include 'pm_wakeup.h' directly Input: spear-keyboard - don't include 'pm_wakeup.h' directly Input: cypress-sf - constify struct i2c_device_id Input: ads7846 - increase xfer array size in 'struct ser_req' Input: fix the input_event struct documentation Input: i8042 - fix typo dublicate to duplicate Input: ads7846 - add dummy command register clearing cycle Input: cs40l50 - fix wrong usage of INIT_WORK() Input: introduce notion of passive observers for input handlers Input: maple_keyb - use guard notation when acquiring mutex Input: locomokbd - use guard notation when acquiring spinlock Input: hilkbd - use guard notation when acquiring spinlock Input: synaptics-rmi4 - switch to using cleanup functions in F34 Input: synaptics - fix a typo dt-bindings: input: rotary-encoder: Fix "rotary-encoder,rollover" type Input: omap-keypad - use guard notation when acquiring mutex Input: imagis - fix warning regarding 'imagis_3038_data' being unused Input: userio - remove unneeded semicolon Input: sparcspkr - use cleanup facility for device_node ... |
||
|
Michal Wilczynski
|
b2cf36e4a2 |
dt-bindings: mailbox: Add thead,th1520-mailbox bindings
Add bindings for the mailbox controller. This work is based on the vendor kernel. [1] Link: https://github.com/revyos/thead-kernel.git [1] Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com> |
||
|
Michal Wilczynski
|
5d4d263e1c |
mailbox: Introduce support for T-head TH1520 Mailbox driver
This driver was tested using the drm/imagination GPU driver. It was able to successfully power on the GPU, by passing a command through mailbox from E910 core to E902 that's responsible for powering up the GPU. The GPU driver was able to read the BVNC version from control registers, which confirms it was successfully powered on. [ 33.957467] powervr ffef400000.gpu: [drm] loaded firmware powervr/rogue_36.52.104.182_v1.fw [ 33.966008] powervr ffef400000.gpu: [drm] FW version v1.0 (build 6621747 OS) [ 38.978542] powervr ffef400000.gpu: [drm] *ERROR* Firmware failed to boot Though the driver still fails to boot the firmware, the mailbox driver works when used with the not-yet-upstreamed firmware AON driver. There is ongoing work to get the BXM-4-64 supported with the drm/imagination driver [1], though it's not completed yet. This work is based on the driver from the vendor kernel [2]. Link: https://gitlab.freedesktop.org/imagination/linux-firmware/-/issues/2 [1] Link: https://github.com/revyos/thead-kernel.git [2] Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com> |
||
|
Brendan Higgins
|
16470f6066 |
MAINTAINERS: transfer i2c-aspeed maintainership from Brendan to Ryan
Remove Brendan Higgins <brendanhiggins@google.com> from i2c-aspeed entry and replace with Ryan Chen <ryan_chen@aspeedtech.com>. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Acked-by: Ryan Chen <ryan_chen@aspeedtech.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> |
||
|
Linus Torvalds
|
42d9e8b7cc |
Merge tag 'powerpc-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman: - Rework kfence support for the HPT MMU to work on systems with >= 16TB of RAM. - Remove the powerpc "maple" platform, used by the "Yellow Dog Powerstation". - Add support for DYNAMIC_FTRACE_WITH_CALL_OPS, DYNAMIC_FTRACE_WITH_DIRECT_CALLS & BPF Trampolines. - Add support for running KVM nested guests on Power11. - Other small features, cleanups and fixes. Thanks to Amit Machhiwal, Arnd Bergmann, Christophe Leroy, Costa Shulyupin, David Hunter, David Wang, Disha Goel, Gautam Menghani, Geert Uytterhoeven, Hari Bathini, Julia Lawall, Kajol Jain, Keith Packard, Lukas Bulwahn, Madhavan Srinivasan, Markus Elfring, Michal Suchanek, Ming Lei, Mukesh Kumar Chaurasiya, Nathan Chancellor, Naveen N Rao, Nicholas Piggin, Nysal Jan K.A, Paulo Miguel Almeida, Pavithra Prakash, Ritesh Harjani (IBM), Rob Herring (Arm), Sachin P Bappalige, Shen Lichuan, Simon Horman, Sourabh Jain, Thomas Weißschuh, Thorsten Blum, Thorsten Leemhuis, Venkat Rao Bagalkote, Zhang Zekun, and zhang jiao. * tag 'powerpc-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (89 commits) EDAC/powerpc: Remove PPC_MAPLE drivers powerpc/perf: Add per-task/process monitoring to vpa_pmu driver powerpc/kvm: Add vpa latency counters to kvm_vcpu_arch docs: ABI: sysfs-bus-event_source-devices-vpa-pmu: Document sysfs event format entries for vpa_pmu powerpc/perf: Add perf interface to expose vpa counters MAINTAINERS: powerpc: Mark Maddy as "M" powerpc/Makefile: Allow overriding CPP powerpc-km82xx.c: replace of_node_put() with __free ps3: Correct some typos in comments powerpc/kexec: Fix return of uninitialized variable macintosh: Use common error handling code in via_pmu_led_init() powerpc/powermac: Use of_property_match_string() in pmac_has_backlight_type() powerpc: remove dead config options for MPC85xx platform support powerpc/xive: Use cpumask_intersects() selftests/powerpc: Remove the path after initialization. powerpc/xmon: symbol lookup length fixed powerpc/ep8248e: Use %pa to format resource_size_t powerpc/ps3: Reorganize kerneldoc parameter names KVM: PPC: Book3S HV: Fix kmv -> kvm typo powerpc/sstep: make emulate_vsx_load and emulate_vsx_store static ... |
||
|
Linus Torvalds
|
5c00ff742b |
Merge tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "zram: optimal post-processing target selection" from
Sergey Senozhatsky improves zram's post-processing selection
algorithm. This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping
code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of
shadow entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in
the hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page
into small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to
do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio
size rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON
splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel
Butt removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations"
from Mike Rapoport teaches x86 to use large pages for
read-only-execute module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in
tests over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a
single VMA, rather than requiring that multiple VMAs be created for
this. Improved efficiencies for userspace memory allocators are
expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP
from the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep
is enabled.
* tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (215 commits)
cma: enforce non-zero pageblock_order during cma_init_reserved_mem()
mm/kfence: add a new kunit test test_use_after_free_read_nofault()
zram: fix NULL pointer in comp_algorithm_show()
memcg/hugetlb: add hugeTLB counters to memcg
vmstat: call fold_vm_zone_numa_events() before show per zone NUMA event
mm: mmap_lock: check trace_mmap_lock_$type_enabled() instead of regcount
zram: ZRAM_DEF_COMP should depend on ZRAM
MAINTAINERS/MEMORY MANAGEMENT: add document files for mm
Docs/mm/damon: recommend academic papers to read and/or cite
mm: define general function pXd_init()
kmemleak: iommu/iova: fix transient kmemleak false positive
mm/list_lru: simplify the list_lru walk callback function
mm/list_lru: split the lock to per-cgroup scope
mm/list_lru: simplify reparenting and initial allocation
mm/list_lru: code clean up for reparenting
mm/list_lru: don't export list_lru_add
mm/list_lru: don't pass unnecessary key parameters
kasan: add kunit tests for kmalloc_track_caller, kmalloc_node_track_caller
kasan: change kasan_atomics kunit test as KUNIT_CASE_SLOW
kasan: use EXPORT_SYMBOL_IF_KUNIT to export symbols
...
|
||
|
Linus Torvalds
|
060fc106b6 |
Merge tag 'unicode-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode
Pull unicode updates from Gabriel Krisman Bertazi: - constify a read-only struct (Thomas Weißschuh) - fix the error path of unicode_load, avoiding a possible kernel oops if it fails to find the unicode module (André Almeida) - documentation fix, updating a filename in the README (Gan Jie) - add the link of my tree to MAINTAINERS (André Almeida) * tag 'unicode-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode: MAINTAINERS: Add Unicode tree unicode: change the reference of database file unicode: Fix utf8_load() error path unicode: constify utf8 data table |
||
|
Linus Torvalds
|
980f8f8fd4 |
Merge tag 'sysctl-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
"sysctl ctl_table constification:
- Constifying ctl_table structs prevents the modification of
proc_handler function pointers. All ctl_table struct arguments are
const qualified in the sysctl API in such a way that the ctl_table
arrays being defined elsewhere and passed through sysctl can be
constified one-by-one.
We kick the constification off by qualifying user_table in
kernel/ucount.c and expect all the ctl_tables to be constified in
the coming releases.
Misc fixes:
- Adjust comments in two places to better reflect the code
- Remove superfluous dput calls
- Remove Luis from sysctl maintainership
- Replace comments about holding a lock with calls to
lockdep_assert_held"
* tag 'sysctl-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: Reduce dput(child) calls in proc_sys_fill_cache()
sysctl: Reorganize kerneldoc parameter names
ucounts: constify sysctl table user_table
sysctl: update comments to new registration APIs
MAINTAINERS: remove me from sysctl
sysctl: Convert locking comments to lockdep assertions
const_structs.checkpatch: add ctl_table
sysctl: make internal ctl_tables const
sysctl: allow registration of const struct ctl_table
sysctl: move internal interfaces to const struct ctl_table
bpf: Constify ctl_table argument of filter function
|
||
|
Linus Torvalds
|
ceba6f6f33 |
Merge tag 'iommu-updates-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core Updates:
- Convert call-sites using iommu_domain_alloc() to more specific
versions and remove function
- Introduce iommu_paging_domain_alloc_flags()
- Extend support for allocating PASID-capable domains to more drivers
- Remove iommu_present()
- Some smaller improvements
New IOMMU driver for RISC-V
Intel VT-d Updates:
- Add domain_alloc_paging support
- Enable user space IOPFs in non-PASID and non-svm cases
- Small code refactoring and cleanups
- Add domain replacement support for pasid
AMD-Vi Updates:
- Adapt to iommu_paging_domain_alloc_flags() interface and alloc V2
page-tables by default
- Replace custom domain ID allocator with IDA allocator
- Add ops->release_domain() support
- Other improvements to device attach and domain allocation code
paths
ARM-SMMU Updates:
- SMMUv2:
- Return -EPROBE_DEFER for client devices probing before their
SMMU
- Devicetree binding updates for Qualcomm MMU-500 implementations
- SMMUv3:
- Minor fixes and cleanup for NVIDIA's virtual command queue
driver
- IO-PGTable:
- Fix indexing of concatenated PGDs and extend selftest coverage
- Remove unused block-splitting support
S390 IOMMU:
- Implement support for blocking domain
Mediatek IOMMU:
- Enable 35-bit physical address support for mt8186
OMAP IOMMU driver:
- Adapt to recent IOMMU core changes and unbreak driver"
* tag 'iommu-updates-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (92 commits)
iommu/tegra241-cmdqv: Fix alignment failure at max_n_shift
iommu: Make set_dev_pasid op support domain replacement
iommu/arm-smmu-v3: Make set_dev_pasid() op support replace
iommu/vt-d: Add set_dev_pasid callback for nested domain
iommu/vt-d: Make identity_domain_set_dev_pasid() to handle domain replacement
iommu/vt-d: Make intel_svm_set_dev_pasid() support domain replacement
iommu/vt-d: Limit intel_iommu_set_dev_pasid() for paging domain
iommu/vt-d: Make intel_iommu_set_dev_pasid() to handle domain replacement
iommu/vt-d: Add iommu_domain_did() to get did
iommu/vt-d: Consolidate the struct dev_pasid_info add/remove
iommu/vt-d: Add pasid replace helpers
iommu/vt-d: Refactor the pasid setup helpers
iommu/vt-d: Add a helper to flush cache for updating present pasid entry
iommu: Pass old domain to set_dev_pasid op
iommu/iova: Fix typo 'adderss'
iommu: Add a kdoc to iommu_unmap()
iommu/io-pgtable-arm-v7s: Remove split on unmap behavior
iommu/io-pgtable-arm: Remove split on unmap behavior
iommu/vt-d: Drain PRQs when domain removed from RID
iommu/vt-d: Drop pasid requirement for prq initialization
...
|
||
|
Linus Torvalds
|
d0c9a21c8e |
Merge tag 'mtd/for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD device changes:
- switch platform_driver back to remove()
- misc fixes
SPI-NAND changes:
- a load of fixes to Winbond manufacturer driver
- structure constification
Raw NAND changes:
- improve the power management of the GPMI driver
- Davinci driver clean-ups
- fix leak in the Atmel driver
- fix some typos in the core
SPI NOR changes:
- Introduce byte swap support for 8D-8D-8D mode and a user for it:
macronix.
SPI NOR flashes may swap the bytes on a 16-bit boundary when
configured in Octal DTR mode. For such cases the byte order is
propagated through SPI MEM to the SPI controllers so that the
controllers swap the bytes back at runtime. This avoids breaking
the boot sequence because of the endianness problems that appear
when the bootloaders use 1-1-1 and the kernel uses 8D-8D-8D with
byte swap support. Along with the SPI MEM byte swap support we
queue a patch for the SPI MXIC controller that swaps the bytes back
at runtime"
* tag 'mtd/for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (25 commits)
mtd: spi-nor: core: replace dummy buswidth from addr to data
mtd: spi-nor: winbond: add "w/ and w/o SFDP" comment
mtd: spi-nor: spansion: Use nor->addr_nbytes in octal DTR mode in RD_ANY_REG_OP
mtd: Switch back to struct platform_driver::remove()
mtd: cfi_cmdset_0002: remove redundant assignment to variable ret
mtd: spinand: Constify struct nand_ecc_engine_ops
MAINTAINERS: add mailing list for GPMI NAND driver
mtd: spinand: winbond: Sort the devices
mtd: spinand: winbond: Ignore the last ID characters
mtd: spinand: winbond: Fix 512GW, 01GW, 01JW and 02JW ECC information
mtd: spinand: winbond: Fix 512GW and 02JW OOB layout
mtd: nand: raw: gpmi: improve power management handling
mtd: nand: raw: gpmi: switch to SYSTEM_SLEEP_PM_OPS
mtd: rawnand: davinci: use generic device property helpers
mtd: rawnand: davinci: break the line correctly
mtd: rawnand: davinci: order headers alphabetically
mtd: rawnand: atmel: Fix possible memory leak
mtd: rawnand: Correct multiple typos in comments
mtd: hyperbus: rpc-if: Add missing MODULE_DEVICE_TABLE
mtd: spi-nor: add support for Macronix Octal flash
...
|
||
|
Linus Torvalds
|
9f3a2ba62c |
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The core framework gained a clk provider helper, a clk consumer
helper, and some unit tests for the assigned clk rates feature in
DeviceTree. On the vendor driver side, we gained a whole pile of SoC
driver support detailed below. The majority in the diffstat is
Qualcomm, but there's also quite a few Samsung and Mediatek clk driver
additions in here as well. The top vendors is quite common, but the
sheer amount of new drivers is uncommon, so I'm anticipating a larger
number of fixes for clk drivers this cycle.
Core:
- devm_clk_bulk_get_all_enabled() to return number of clks acquired
- devm_clk_hw_register_gate_parent_hw() helper to modernize drivers
- KUnit tests for clk-assigned-rates{,-u64}
New Drivers:
- Marvell PXA1908 SoC clks
- Mobileye EyeQ5, EyeQ6L and EyeQ6H clk driver
- TWL6030 clk driver
- Nuvoton Arbel BMC NPCM8XX SoC clks
- MediaTek MT6735 SoC clks
- MediaTek MT7620, MT7628 and MT7688 MMC clks
- Add a driver for gated fixed rate clocks
- Global clock controllers for Qualcomm QCS8300 and IPQ5424 SoCs
- Camera, display and video clock controllers for Qualcomm SA8775P
SoCs
- Global, display, GPU, TCSR, and RPMh clock controllers for Qualcomm
SAR2130P
- Global, camera, display, GPU, and video clock controllers for
Qualcomm SM8475 SoCs
- RTC power domain and Battery Backup Function (VBATTB) clock support
for the Renesas RZ/G3S SoC
- Qualcomm IPQ9574 alpha PLLs
- Support for i.MX91 CCM in the i.MX93 driver
- Microchip LAN969X SoC clks
- Cortex-A55 core clocks and Interrupt Control Unit (ICU) clock and
reset on Renesas RZ/V2H(P)
- Samsung ExynosAutov920 clk drivers for PERIC1, MISC, HSI0 and HSI1
- Samsung Exynos8895 clk drivers for FSYS0/1, PERIC0/1, PERIS and TOP
Updates:
- Convert more clk bindings to YAML
- Various clk driver cleanups: NULL checks, add const, etc.
- Remove END/NUM #defines that count number of clks in various
binding headers
- Continue moving reset drivers to drivers/reset via auxiliary bus"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (162 commits)
clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access
clk: Fix invalid execution of clk_set_rate
clk: clk-loongson2: Fix memory corruption bug in struct loongson2_clk_provider
clk: lan966x: make it selectable for ARCH_LAN969X
clk: eyeq: add EyeQ6H west fixed factor clocks
clk: eyeq: add EyeQ6H central fixed factor clocks
clk: eyeq: add EyeQ5 fixed factor clocks
clk: eyeq: add fixed factor clocks infrastructure
clk: eyeq: require clock index with phandle in all cases
clk: fixed-factor: add clk_hw_register_fixed_factor_index() function
dt-bindings: clock: eyeq: add more Mobileye EyeQ5/EyeQ6H clocks
dt-bindings: soc: mobileye: set `#clock-cells = <1>` for all compatibles
clk: clk-axi-clkgen: make sure to enable the AXI bus clock
dt-bindings: clock: axi-clkgen: include AXI clk
clk: mmp: Add Marvell PXA1908 MPMU driver
clk: mmp: Add Marvell PXA1908 APMU driver
clk: mmp: Add Marvell PXA1908 APBCP driver
clk: mmp: Add Marvell PXA1908 APBC driver
dt-bindings: clock: Add Marvell PXA1908 clock bindings
clk: mmp: Switch to use struct u32_fract instead of custom one
...
|
||
|
Linus Torvalds
|
2fb7eb3d7e |
Merge tag 'backlight-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones: - Improve handling of LCD power states and interactions with the fbdev subsystem - Introduce new LCD_POWER_ constants to decouple the LCD subsystem from fbdev - Update several drivers to use the new LCD_POWER_ constants - Clarify the semantics of the lcd_ops.controls_device callback - Remove unnecessary includes and dependencies - Remove unused notifier functionality - Simplify code with scoped for-each loops - Fix module autoloading for the ktz8866 driver - Update device tree bindings to yaml format - Minor cleanups and improvements in various drivers * tag 'backlight-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (33 commits) MAINTAINERS: Use Daniel Thompson's korg address for Backlight work dt-bindings: backlight: Convert zii,rave-sp-backlight.txt to yaml backlight: Remove notifier backlight: ktz8866: Fix module autoloading backlight: 88pm860x_bl: Simplify with scoped for each OF child loop backlight: lcd: Do not include <linux/fb.h> in lcd header backlight: lcd: Remove struct fb_videomode from set_mode callback backlight: lcd: Replace check_fb with controls_device HID: picoLCD: Replace check_fb in favor of struct fb_info.lcd_dev fbdev: omap: Use lcd power constants fbdev: imxfb: Use lcd power constants fbdev: imxfb: Replace check_fb in favor of struct fb_info.lcd_dev fbdev: clps711x-fb: Use lcd power constants fbdev: clps711x-fb: Replace check_fb in favor of struct fb_info.lcd_dev backlight: tdo24m: Use lcd power constants backlight: platform_lcd: Use lcd power constants backlight: platform_lcd: Remove match_fb from struct plat_lcd_data backlight: platform_lcd: Remove include statement for <linux/backlight.h> backlight: otm3225a: Use lcd power constants backlight: ltv350qv: Use lcd power constants ... |
||
|
Linus Torvalds
|
93251bdf7a |
Merge tag 'leds-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
PULL LED updates from Lee Jones: - Remove unused local header files from various drivers - Revert platform driver removal to the original method for consistency - Introduce ordered workqueues for LED events, replacing the less efficient system_wq - Switch to a safer iteration macro in several drivers to prevent potential memory leaks - Fix a refcounting bug in the mt6360 flash LED driver - Fix an uninitialized variable in the mt6370_mc_pattern_clear() function - Resolve Smatch warnings in the leds-bcm6328 driver - Address a potential NULL pointer dereference in the brightness_show() function - Fix an incorrect format specifier in the ss4200 driver - Prevent a resource leak in the max5970 driver's probe function - Add support for specifying the number of serial shift bits in the device tree for the BCM63138 family - Implement multicolor brightness control in the lp5562 driver - Add a device tree property to override the default LED pin polarity - Add a property to specify the default brightness value when the LED is initially on - Set missing timing properties for the ktd2692 driver - Document the "rc-feedback" trigger for controlling LEDs based on remote control activity - Convert text bindings to YAML for the pca955x driver to enable device tree validation - Remove redundant checks for invalid channel numbers in the lp55xx driver - Update the MAINTAINERS file with current contact information * tag 'leds-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (46 commits) leds: ss4200: Fix the wrong format specifier for 'blinking' leds: pwm: Add optional DT property default-brightness dt-bindings: leds: pwm: Add default-brightness property leds: class: Protect brightness_show() with led_cdev->led_access mutex leds: ktd2692: Set missing timing properties leds: max5970: Fix unreleased fwnode_handle in probe function leds: Introduce ordered workqueue for LEDs events instead of system_wq MAINTAINERS: Replace Siemens IPC related bouncing maintainers leds: bcm6328: Replace divide condition with comparison for shift value leds: lp55xx: Remove redundant test for invalid channel number dt-bindings: leds: pca955x: Convert text bindings to YAML leds: rgb: leds-mt6370-rgb: Fix uninitialized variable 'ret' in mt6370_mc_pattern_clear leds: lp5562: Add multicolor brightness control dt-bindings: leds: Add 'active-high' property leds: Switch back to struct platform_driver::remove() leds: bcm63138: Add some register defines leds: bcm63138: Handle shift register config leds: bcm63138: Use scopes and guards dt-bindings: leds: bcm63138: Add shift register bits leds: leds-gpio-register: Reorganize kerneldoc parameter names ... |
||
|
Linus Torvalds
|
80739fd00c |
Merge tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones: - Several drivers, including atmel-flexcom/rk8xx-core, palmas, and tps65010, have undergone minor code improvements to enhance consistency and fix race conditions. - The syscon driver now utilizes the regmap max_register_is_0 capability for consistent register map configuration across syscons of all sizes. - New device support has been added for QCS8300, qcs615, SA8255p, and samsung,s2dos05, expanding the range of compatible hardware. - The cros_ec driver now supports loading cros_ec_ucsi on supported ECs and avoids loading the charger with UCSI, streamlining functionality. - The bd96801 driver now utilizes the more modern maple tree register cache, improving performance. - The da9052-spi driver has undergone a fix to change the read-mask to write-mask, preventing potential issues. - Unused declarations in max77693 have been removed, and support for samsung,s2dos05 has been added, enhancing code clarity and device compatibility. - Error handling in cs42l43 has been fixed to avoid unbalanced regulator put and ensure proper synchronization during driver removal. - The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of MODULE_ALIAS(), improving code consistency. - Documentation for qcom,tcsr, syscon, and atmel-smc has been updated and reorganized for better clarity and maintainability. - The intel_soc_pmic_bxtwc driver has undergone significant improvements, including the use of IRQ domains for various devices, fixing IRQ domain names duplication, and code refactoring for better consistency and maintainability. - The ipaq-micro driver has received a fix for a missing break statement in the default case, enhancing code robustness. - Support for the AXP323 PMIC has been added to the axp20x driver, along with ensuring a clear relationship between IDs and model names, and allowing multiple regulators, broadening hardware compatibility. - The cs42l43 driver now disables IRQs during suspend for improved power management. - The adp5585 driver has reduced its dependencies by dropping the obsolete dependency on COMPILE_TEST. - Initial support for the MT6328 PMIC has been added to the mt6397 driver, expanding the range of supported hardware. - The rtc-bd70528 driver has been simplified by dropping the IC name from IRQ, improving code readability. - Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been updated to enhance clarity and incorporate new features. - The rt5033 driver has received a fix for a missing regmap_del_irq_chip() in the error handling path. - New device support has been added for MSM8917, and the intel_soc_pmic_crc driver now supports non-ACPI instantiated i2c_client. - The 88pm886 driver has added support for the RTC cell, and the tqmx86 driver has improved its GPIO IRQ setup and added I2C IRQ support, increasing functionality. - The sprd,sc2731 DT schema has been updated and converted to YAML format for better readability and maintainability. * tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (62 commits) dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm dt-bindings: mfd: sprd,sc2731: Convert to YAML mfd: tqmx86: Add I2C IRQ support mfd: tqmx86: Make IRQ setup errors non-fatal mfd: tqmx86: Refactor GPIO IRQ setup mfd: tqmx86: Improve gpio_irq module parameter description mfd: tqmx86: Add board definitions for TQMx120UC, TQMx130UC and TQMxE41S mfd: 88pm886: Add the RTC cell dt-bindings: mfd: Add Realtek RTL9300 switch peripherals mfd: intel_soc_pmic_crc: Add support for non ACPI instantiated i2c_client mfd: intel_soc_pmic_*: Consistently use filename as driver name dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917 mfd: rt5033: Fix missing regmap_del_irq_chip() mfd: cgbc-core: Fix error handling paths in cgbc_init_device() dt-bindings: mfd: aspeed: Support for AST2700 mfd: Switch back to struct platform_driver::remove() dt-bindings: mfd: qcom,spmi-pmic: Document PMICs added in SM8750 mfd: rtc: bd7xxxx Drop IC name from IRQ mfd: mt6397: Add initial support for MT6328 mfd: adp5585: Drop obsolete dependency on COMPILE_TEST ... |
||
|
Linus Torvalds
|
e288c352a4 |
Merge tag 'linux_kselftest-kunit-6.13-rc1-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan: - fix user-after-free (UAF) bug in kunit_init_suite() - add option to kunit tool to print just the summary of test results - add option to kunit tool to print just the failed test results - fix kunit_zalloc_skb() to use user passed in gfp value instead of hardcoding GFP_KERNEL - fixe kunit_zalloc_skb() kernel doc to include allocation flags variable - update KUnit email address for Brendan Higgins - add LoongArch config to qemu_configs - allow overriding the shutdown mode from qemu config - enable shutdown in loongarch qemu_config - fix potential null dereference in kunit_device_driver_test() - fix debugfs to use IS_ERR() for alloc_string_stream() error check * tag 'linux_kselftest-kunit-6.13-rc1-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: qemu_configs: loongarch: Enable shutdown kunit: tool: Allow overriding the shutdown mode from qemu config kunit: qemu_configs: Add LoongArch config kunit: debugfs: Use IS_ERR() for alloc_string_stream() error check kunit: Fix potential null dereference in kunit_device_driver_test() MAINTAINERS: Update KUnit email address for Brendan Higgins kunit: string-stream: Fix a UAF bug in kunit_init_suite() kunit: tool: print failed tests only kunit: tool: Only print the summary kunit: skb: add gfp to kernel doc for kunit_zalloc_skb() kunit: skb: use "gfp" variable instead of hardcoding GFP_KERNEL |
||
|
Linus Torvalds
|
28eb75e178 |
Merge tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There's a lot of rework, the panic helper support is being added to
more drivers, v3d gets support for HW superpages, scheduler
documentation, drm client and video aperture reworks, some new
MAINTAINERS added, amdgpu has the usual lots of IP refactors, Intel
has some Pantherlake enablement and xe is getting some SRIOV bits, but
just lots of stuff everywhere.
core:
- split DSC helpers from DP helpers
- clang build fixes for drm/mm test
- drop simple pipeline support for gem vram
- document submission error signaling
- move drm_rect to drm core module from kms helper
- add default client setup to most drivers
- move to video aperture helpers instead of drm ones
tests:
- new framebuffer tests
ttm:
- remove swapped and pinned BOs from TTM lru
panic:
- fix uninit spinlock
- add ABGR2101010 support
bridge:
- add TI TDP158 support
- use standard PM OPS
dma-fence:
- use read_trylock instead of read_lock to help lockdep
scheduler:
- add errno to sched start to report different errors
- add locking to drm_sched_entity_modify_sched
- improve documentation
xe:
- add drm_line_printer
- lots of refactoring
- Enable Xe2 + PES disaggregation
- add new ARL PCI ID
- SRIOV development work
- fix exec unnecessary implicit fence
- define and parse OA sync props
- forcewake refactoring
i915:
- Enable BMG/LNL ultra joiner
- Enable 10bpx + CCS scanout on ICL+, fp16/CCS on TGL+
- use DSB for plane/color mgmt
- Arrow lake PCI IDs
- lots of i915/xe display refactoring
- enable PXP GuC autoteardown
- Pantherlake (PTL) Xe3 LPD display enablement
- Allow fastset HDR infoframe changes
- write DP source OUI for non-eDP sinks
- share PCI IDs between i915 and xe
amdgpu:
- SDMA queue reset support
- SMU 13.0.6, JPEG 4.0.3 updates
- Initial runtime repartitioning support
- rework IP structs for multiple IP instances
- Fetch EDID from _DDC if available
- SMU13 zero rpm user control
- lots of fixes/cleanups
amdkfd:
- Increase event FIFO size
- add topology cap flag for per queue reset
msm:
- DPU:
- SA8775P support
- (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996 support
- Enable large framebuffer support
- Drop MSM8998 and SDM845
- DP:
- SA8775P support
- GPU:
- a7xx preemption support
- Adreno A663 support
ast:
- warn about unsupported TX chips
ivpu:
- add coredump
- add pantherlake support
rockchip:
- 4K@60Hz display enablement
- generate pll programming tables
panthor:
- add timestamp query API
- add realtime group priority
- add fdinfo support
etnaviv:
- improve handling of DMA address limits
- improve GPU hangcheck
exynos:
- Decon Exynos7870 support
mediatek:
- add OF graph support
omap:
- locking fixes
bochs:
- convert to gem/shmem from simpledrm
v3d:
- support big/super pages
- add gemfs
vc4:
- BCM2712 support refactoring
- add YUV444 format support
udmabuf:
- folio related fixes
nouveau:
- add panic support on nv50+"
* tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernel: (1583 commits)
drm/xe/guc: Fix dereference before NULL check
drm/amd: Fix initialization mistake for NBIO 7.7.0
Revert "drm/amd/display: parse umc_info or vram_info based on ASIC"
drm/amd/display: Fix failure to read vram info due to static BP_RESULT
drm/amdgpu: enable GTT fallback handling for dGPUs only
drm/amd/amdgpu: limit single process inside MES
drm/fourcc: add AMD_FMT_MOD_TILE_GFX9_4K_D_X
drm/amdgpu/mes12: correct kiq unmap latency
drm/amdgpu: Support vcn and jpeg error info parsing
drm/amd : Update MES API header file for v11 & v12
drm/amd/amdkfd: add/remove kfd queues on start/stop KFD scheduling
drm/amdkfd: change kfd process kref count at creation
drm/amdgpu: Cleanup shift coding style
drm/amd/amdgpu: Increase MES log buffer to dump mes scratch data
drm/amdgpu: Implement virt req_ras_err_count
drm/amdgpu: VF Query RAS Caps from Host if supported
drm/amdgpu: Add msg handlers for SRIOV RAS Telemetry
drm/amdgpu: Update SRIOV Exchange Headers for RAS Telemetry Support
drm/amd/display: 3.2.309
drm/amd/display: Adjust VSDB parser for replay feature
...
|
||
|
Linus Torvalds
|
071b34dcf7 |
Merge tag 'sound-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This is a relatively calm cycle, and majority of changes are about
ASoC. There are little changes in the core side but we received lots
of new drivers for new vendors.
ALSA Core:
- The new accel operation mode for compress-offload API; only the
core part, the actual user will follow later
ASoC:
- Continued API simplification works
- Renaming of the sh directory to Renesas
- Factoring out of some of the common code for Realtek devices
- Ussal ASoC Intel SOF, AMD and SoundWire updates
- Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081,
Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307,
Longsoon I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342,
Qualcomm SM8750, RealTek RT721, and ST Microelectronics STM32MP25
HD- and USB-audio:
- Clean up of IRQ handling in legacy HD-audio driver
- Fix soft lockup at disconnection of non-standard USB drivers
- Scarlett2 mixer improvements
- New quirks and cleanups in HD- and USB-audio"
* tag 'sound-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (278 commits)
ALSA: hda: Poll jack events for LS7A HD-Audio
ASoC: hdmi-codec: reorder channel allocation list
ALSA: ump: Fix the wrong format specifier
ASoC: Intel: soc-acpi-intel-lnl-match: add rt712_vb + rt1320 support
ASoC: stm32: dfsdm: change rate upper limits
ASoC: sma1307: fix uninitialized variable refence
ASoC: dt-bindings: simple-mux: add idle-state property
ASoc: simple-mux: add idle-state support
ASoC: sdca: test adev before calling acpi_dev_for_each_child
ASoC: SOF: ipc4-topology: remove redundant assignment to variable ret
ASoC: amd: ps: fix the pcm device numbering for acp 6.3 platform
ASoC: amd: acp: add soundwire machine driver for legacy stack
ASoC: amd: acp: move get_acp63_cpu_pin_id() to common file
ASoC: amd: ps: add soundwire machines for acp6.3 platform
ASoC: amd: acp: add RT711, RT714 & RT1316 support for acp 6.3 platform
ASoC: amd: acp: add rt722 based soundwire machines
ALSA: compress_offload: Add missing descriptions in structs
ALSA: 6fire: Release resources at card release
ALSA: caiaq: Use snd_card_free_when_closed() at disconnection
ALSA: us122l: Drop mmap_count field
...
|
||
|
Linus Torvalds
|
55ae3eef10 |
Merge tag 'i2c-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Core:
- drivers can now use a GPIO as a side channel for SMBus Alerts using
a generic binding
- regular stuff like mem leak fix, Makefile maintenance...
Host improvements and refactoring:
- All controllers using the 'remove_new' callback have been reverted
to use the 'remove' callback
- Intel SCH controller underwent significant refactoring, this brings
love and a modern look to the driver
- PIIX4 driver refactored to enable usage by other drivers (e.g., AMD
ASF)
- iMX/MXC improved message handling to reduce protocol overhead:
Refactored DMA/non-DMA read/write and bus polling mechanisms to
achieve this.
- ACPI documentation for PIIX4
New host features:
- i2c-cadence support for atomic transfers
- Qualcomm CII support for a 32MHz serial engine clock
Deprecated features:
- Dropped outdated support for AMD756 S4882 and NFORCE2 S4985. If
somebody misses this, Jean will rewrite support using the proper
i2c mux framework.
New hardware IDs for existing drivers:
- Intel Panther Lake
- S32G2/S32G3 SoCs
- HJMC01 DesignWare ACPI HID
- PIC64GX to Microchip Core
- Qualcomm SDM670 to Qualcomm CCI
New drivers:
- AMD ASF
- Realtek RTL I2C Controller
at24 updates:
- add support for the lockable page on ST M24256E"
* tag 'i2c-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (59 commits)
docs: i2c: piix4: Add ACPI section
i2c: Add driver for the RTL9300 I2C controller
i2c: qcom-cci: Remove unused struct member cci_clk_rate
dt-bindings: i2c: Add Realtek RTL I2C Controller
i2c: busses: Use *-y instead of *-objs in Makefile
i2c: imx: add support for S32G2/S32G3 SoCs
dt-bindings: i2c: imx: add SoC specific compatible strings for S32G
i2c: qcom-cci: Remove the unused variable cci_clk_rate
i2c: Drop legacy muxing pseudo-drivers
i2c: imx: prevent rescheduling in non dma mode
i2c: imx: separate atomic, dma and non-dma use case
i2c: imx: do not poll for bus busy in single master mode
i2c: designware: Add a new ACPI HID for HJMC01 I2C controller
i2c: qcom-geni: Keep comment why interrupts start disabled
dt-bindings: i2c: microchip: corei2c: Add PIC64GX as compatible with driver
i2c: designware: constify abort_sources
i2c: Switch back to struct platform_driver::remove()
i2c: qcom-geni: Support systems with 32MHz serial engine clock
i2c: qcom-cci: Stop complaining about DT set clock rate
dt-bindings: i2c: qcom-cci: Document SDM670 compatible
...
|
||
|
Linus Torvalds
|
c01f664e4c |
Merge tag 'reiserfs_delete' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull reiserfs removal from Jan Kara: "The deprecation period of reiserfs is ending at the end of this year so it is time to remove it" * tag 'reiserfs_delete' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: reiserfs: The last commit |
||
|
Linus Torvalds
|
fcc79e1714 |
Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core:
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of
rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infrastructure is guarded by the
CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code:
- Add small file operations for debugfs, to reduce the struct ops
size.
- Refactoring and optimization for the implementation of page_frag
API, This is a preparatory work to consolidate the page_frag
implementation.
Netfilter:
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users the
option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent CI
improvements.
BPF:
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols:
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after
close, the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state
lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per
device neigh lists.
Driver API:
- Introduce a unified interface to configure transmission H/W
shaping, and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling:
- forwarding: introduce deferred commands, to simplify the cleanup
phase
Drivers:
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- add support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Add representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- add support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implement page pool support
- macsec:
- inherit lower device's features and TSO limits when
offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- add dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- add clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature"
* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
mm: page_frag: fix a compile error when kernel is not compiled
Documentation: tipc: fix formatting issue in tipc.rst
selftests: nic_performance: Add selftest for performance of NIC driver
selftests: nic_link_layer: Add selftest case for speed and duplex states
selftests: nic_link_layer: Add link layer selftest for NIC driver
bnxt_en: Add FW trace coredump segments to the coredump
bnxt_en: Add a new ethtool -W dump flag
bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
bnxt_en: Add functions to copy host context memory
bnxt_en: Do not free FW log context memory
bnxt_en: Manage the FW trace context memory
bnxt_en: Allocate backing store memory for FW trace logs
bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
bnxt_en: Refactor bnxt_free_ctx_mem()
bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
bnxt_en: Update firmware interface spec to 1.10.3.85
selftests/bpf: Add some tests with sockmap SK_PASS
bpf: fix recursive lock when verdict program return SK_PASS
wireguard: device: support big tcp GSO
wireguard: selftests: load nf_conntrack if not present
...
|
||
|
Bjorn Helgaas
|
b88cbaaa6f |
PCI/pwrctrl: Rename pwrctl files to pwrctrl
To slightly reduce confusion between "pwrctl" (the power controller and power sequencing framework) and "bwctrl" (the bandwidth controller), rename "pwrctl" to "pwrctrl" so they use the same "ctrl" suffix. Rename drivers/pci/pwrctl/ to drivers/pci/pwrctrl/, including the related MAINTAINERS, include file (include/linux/pci-pwrctl.h), Makefile, and Kconfig changes. This is the minimal rename of files only. A subsequent commit will rename functions and data structures. Link: https://lore.kernel.org/r/20241115214428.2061153-2-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Acked-by: Krzysztof Wilczyński <kw@linux.com> |