Enable the cleaner shader for other GFX9.x series of GPUs to provide
data isolation between GPU workloads. The cleaner shader is responsible
for clearing the Local Data Store (LDS), Vector General Purpose
Registers (VGPRs), and Scalar General Purpose Registers (SGPRs), which
helps prevent data leakage and ensures accurate computation results.
This update extends cleaner shader support to GFX9.x GPUs, previously
available for GFX9.4.2. It enhances security by clearing GPU memory
between processes and maintains a consistent GPU state across KGD and
KFD workloads.
Cc: Manu Rastogi <manu.rastogi@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 99808926d0)
The 8250 binding before converting to json-schema states,
- clock-frequency : the input clock frequency for the UART
or
- clocks phandle to refer to the clk used as per Documentation/devicetree
for clock-related properties, where "or" indicates these properties
shouldn't exist at the same time.
Additionally, the behavior of Linux's driver is strange when both clocks
and clock-frequency are specified: it ignores clocks and obtains the
frequency from clock-frequency, left the specified clocks unclaimed. It
may even be disabled, which is undesired most of the time.
But "anyOf" doesn't prevent these two properties from coexisting, as it
considers the object valid as long as there's at LEAST one match.
Let's switch to "oneOf" and disallows the other property if one exists,
precisely matching the original binding and avoiding future confusion on
the driver's behavior.
Fixes: e69f5dc623 ("dt-bindings: serial: Convert 8250 to json-schema")
Cc: stable <stable@kernel.org>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250623093445.62327-1-ziyao@disroot.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 7a637784d5 ("serial: imx: reduce RX interrupt frequency")
introduced a regression on the i.MX6UL EVK board. The issue can be
reproduced with the following steps:
- Open vi on the board.
- Paste a text file (~150 characters).
- Save the file, then repeat the process.
- Compare the sha256sum of the saved files.
The checksums do not match due to missing characters or entire lines.
Fix this by restoring the RXTL value to 1 when the UART is used as a
console.
This ensures timely RX interrupts and reliable data reception in console
mode.
With this change, pasted content is saved correctly, and checksums are
always consistent.
Cc: stable <stable@kernel.org>
Fixes: 7a637784d5 ("serial: imx: reduce RX interrupt frequency")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250619114617.2791939-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Once want_mount_setattr() has returned a positive, it does require
finish_mount_kattr() to release ->mnt_userns. Failing do_mount_setattr()
does not change that.
As the result, we can end up leaking userns and possibly mnt_idmap as
well.
Fixes: c4a16820d9 ("fs: add open_tree_attr()")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- L2CAP: Fix L2CAP MTU negotiation
- hci_core: Fix use-after-free in vhci_flush()
- btintel_pcie: Fix potential race condition in firmware download
- hci_qca: fix unable to load the BT driver
* tag 'for-net-2025-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_core: Fix use-after-free in vhci_flush()
driver: bluetooth: hci_qca:fix unable to load the BT driver
Bluetooth: L2CAP: Fix L2CAP MTU negotiation
Bluetooth: btintel_pcie: Fix potential race condition in firmware download
====================
Link: https://patch.msgid.link/20250623165405.227619-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Unfortunately, FWs of some devices don't have the version of the
iwl_mac_config_cmd defined in the TLVs. We send 0 as the 'def argument
to iwl_fw_lookup_cmd_ver, so for such FWs, the return value will be 0,
leading to a warning, and to not sending the command.
Fix this by assuming that the default version is 1.
Fixes: 83f3ac2848 ("wifi: iwlwifi: Fix incorrect logic on cmd_ver range checking")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250624071427.2662621-1-miriam.rachel.korenblit@intel.com
A new function resetpair() calls close() for the receiver and checks
the return value from recv() on the initial sender side.
Now resetpair() is added to each test case and some additional test
cases.
Note that TCP sets -ECONNRESET to the consumed OOB, but we have decided
not to touch TCP MSG_OOB code in the past.
Before:
# RUN msg_oob.no_peek.ex_oob_ex_oob ...
# msg_oob.c:236:ex_oob_ex_oob:AF_UNIX :Connection reset by peer
# msg_oob.c:237:ex_oob_ex_oob:Expected:
# msg_oob.c:239:ex_oob_ex_oob:Expected ret[0] (-1) == expected_len (0)
# ex_oob_ex_oob: Test terminated by assertion
# FAIL msg_oob.no_peek.ex_oob_ex_oob
not ok 14 msg_oob.no_peek.ex_oob_ex_oob
...
# FAILED: 36 / 48 tests passed.
# Totals: pass:36 fail:12 xfail:0 xpass:0 skip:0 error:0
After:
# RUN msg_oob.no_peek.ex_oob_ex_oob ...
# msg_oob.c:244:ex_oob_ex_oob:AF_UNIX :
# msg_oob.c:245:ex_oob_ex_oob:TCP :Connection reset by peer
# OK msg_oob.no_peek.ex_oob_ex_oob
ok 14 msg_oob.no_peek.ex_oob_ex_oob
...
# PASSED: 48 / 48 tests passed.
# Totals: pass:48 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250619041457.1132791-5-kuni1840@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Christian Brauner reported that even after MSG_OOB data is consumed,
calling close() on the receiver socket causes the peer's recv() to
return -ECONNRESET:
1. send() and recv() an OOB data.
>>> from socket import *
>>> s1, s2 = socketpair(AF_UNIX, SOCK_STREAM)
>>> s1.send(b'x', MSG_OOB)
1
>>> s2.recv(1, MSG_OOB)
b'x'
2. close() for s2 sets ECONNRESET to s1->sk_err even though
s2 consumed the OOB data
>>> s2.close()
>>> s1.recv(10, MSG_DONTWAIT)
...
ConnectionResetError: [Errno 104] Connection reset by peer
Even after being consumed, the skb holding the OOB 1-byte data stays in
the recv queue to mark the OOB boundary and break recv() at that point.
This must be considered while close()ing a socket.
Let's skip the leading consumed OOB skb while checking the -ECONNRESET
condition in unix_release_sock().
Fixes: 314001f0bf ("af_unix: Add OOB support")
Reported-by: Christian Brauner <brauner@kernel.org>
Closes: https://lore.kernel.org/netdev/20250529-sinkt-abfeuern-e7b08200c6b0@brauner/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://patch.msgid.link/20250619041457.1132791-4-kuni1840@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Let's add a test case where consecutive concumed OOB skbs stay
at the head of the queue.
Without the previous patch, ioctl(SIOCATMARK) assertion fails.
Before:
# RUN msg_oob.no_peek.ex_oob_ex_oob_oob ...
# msg_oob.c:305:ex_oob_ex_oob_oob:Expected answ[0] (0) == oob_head (1)
# ex_oob_ex_oob_oob: Test terminated by assertion
# FAIL msg_oob.no_peek.ex_oob_ex_oob_oob
not ok 12 msg_oob.no_peek.ex_oob_ex_oob_oob
After:
# RUN msg_oob.no_peek.ex_oob_ex_oob_oob ...
# OK msg_oob.no_peek.ex_oob_ex_oob_oob
ok 12 msg_oob.no_peek.ex_oob_ex_oob_oob
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250619041457.1132791-3-kuni1840@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jann Horn reported a use-after-free in unix_stream_read_generic().
The following sequences reproduce the issue:
$ python3
from socket import *
s1, s2 = socketpair(AF_UNIX, SOCK_STREAM)
s1.send(b'x', MSG_OOB)
s2.recv(1, MSG_OOB) # leave a consumed OOB skb
s1.send(b'y', MSG_OOB)
s2.recv(1, MSG_OOB) # leave a consumed OOB skb
s1.send(b'z', MSG_OOB)
s2.recv(1) # recv 'z' illegally
s2.recv(1, MSG_OOB) # access 'z' skb (use-after-free)
Even though a user reads OOB data, the skb holding the data stays on
the recv queue to mark the OOB boundary and break the next recv().
After the last send() in the scenario above, the sk2's recv queue has
2 leading consumed OOB skbs and 1 real OOB skb.
Then, the following happens during the next recv() without MSG_OOB
1. unix_stream_read_generic() peeks the first consumed OOB skb
2. manage_oob() returns the next consumed OOB skb
3. unix_stream_read_generic() fetches the next not-yet-consumed OOB skb
4. unix_stream_read_generic() reads and frees the OOB skb
, and the last recv(MSG_OOB) triggers KASAN splat.
The 3. above occurs because of the SO_PEEK_OFF code, which does not
expect unix_skb_len(skb) to be 0, but this is true for such consumed
OOB skbs.
while (skip >= unix_skb_len(skb)) {
skip -= unix_skb_len(skb);
skb = skb_peek_next(skb, &sk->sk_receive_queue);
...
}
In addition to this use-after-free, there is another issue that
ioctl(SIOCATMARK) does not function properly with consecutive consumed
OOB skbs.
So, nothing good comes out of such a situation.
Instead of complicating manage_oob(), ioctl() handling, and the next
ECONNRESET fix by introducing a loop for consecutive consumed OOB skbs,
let's not leave such consecutive OOB unnecessarily.
Now, while receiving an OOB skb in unix_stream_recv_urg(), if its
previous skb is a consumed OOB skb, it is freed.
[0]:
BUG: KASAN: slab-use-after-free in unix_stream_read_actor (net/unix/af_unix.c:3027)
Read of size 4 at addr ffff888106ef2904 by task python3/315
CPU: 2 UID: 0 PID: 315 Comm: python3 Not tainted 6.16.0-rc1-00407-gec315832f6f9 #8 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.fc42 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:122)
print_report (mm/kasan/report.c:409 mm/kasan/report.c:521)
kasan_report (mm/kasan/report.c:636)
unix_stream_read_actor (net/unix/af_unix.c:3027)
unix_stream_read_generic (net/unix/af_unix.c:2708 net/unix/af_unix.c:2847)
unix_stream_recvmsg (net/unix/af_unix.c:3048)
sock_recvmsg (net/socket.c:1063 (discriminator 20) net/socket.c:1085 (discriminator 20))
__sys_recvfrom (net/socket.c:2278)
__x64_sys_recvfrom (net/socket.c:2291 (discriminator 1) net/socket.c:2287 (discriminator 1) net/socket.c:2287 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
RIP: 0033:0x7f8911fcea06
Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08
RSP: 002b:00007fffdb0dccb0 EFLAGS: 00000202 ORIG_RAX: 000000000000002d
RAX: ffffffffffffffda RBX: 00007fffdb0dcdc8 RCX: 00007f8911fcea06
RDX: 0000000000000001 RSI: 00007f8911a5e060 RDI: 0000000000000006
RBP: 00007fffdb0dccd0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000202 R12: 00007f89119a7d20
R13: ffffffffc4653600 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Allocated by task 315:
kasan_save_stack (mm/kasan/common.c:48)
kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1))
__kasan_slab_alloc (mm/kasan/common.c:348)
kmem_cache_alloc_node_noprof (./include/linux/kasan.h:250 mm/slub.c:4148 mm/slub.c:4197 mm/slub.c:4249)
__alloc_skb (net/core/skbuff.c:660 (discriminator 4))
alloc_skb_with_frags (./include/linux/skbuff.h:1336 net/core/skbuff.c:6668)
sock_alloc_send_pskb (net/core/sock.c:2993)
unix_stream_sendmsg (./include/net/sock.h:1847 net/unix/af_unix.c:2256 net/unix/af_unix.c:2418)
__sys_sendto (net/socket.c:712 (discriminator 20) net/socket.c:727 (discriminator 20) net/socket.c:2226 (discriminator 20))
__x64_sys_sendto (net/socket.c:2233 (discriminator 1) net/socket.c:2229 (discriminator 1) net/socket.c:2229 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Freed by task 315:
kasan_save_stack (mm/kasan/common.c:48)
kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1))
kasan_save_free_info (mm/kasan/generic.c:579 (discriminator 1))
__kasan_slab_free (mm/kasan/common.c:271)
kmem_cache_free (mm/slub.c:4643 (discriminator 3) mm/slub.c:4745 (discriminator 3))
unix_stream_read_generic (net/unix/af_unix.c:3010)
unix_stream_recvmsg (net/unix/af_unix.c:3048)
sock_recvmsg (net/socket.c:1063 (discriminator 20) net/socket.c:1085 (discriminator 20))
__sys_recvfrom (net/socket.c:2278)
__x64_sys_recvfrom (net/socket.c:2291 (discriminator 1) net/socket.c:2287 (discriminator 1) net/socket.c:2287 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
The buggy address belongs to the object at ffff888106ef28c0
which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 68 bytes inside of
freed 224-byte region [ffff888106ef28c0, ffff888106ef29a0)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff888106ef3cc0 pfn:0x106ef2
head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x200000000000040(head|node=0|zone=2)
page_type: f5(slab)
raw: 0200000000000040 ffff8881001d28c0 ffffea000422fe00 0000000000000004
raw: ffff888106ef3cc0 0000000080190010 00000000f5000000 0000000000000000
head: 0200000000000040 ffff8881001d28c0 ffffea000422fe00 0000000000000004
head: ffff888106ef3cc0 0000000080190010 00000000f5000000 0000000000000000
head: 0200000000000001 ffffea00041bbc81 00000000ffffffff 00000000ffffffff
head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888106ef2800: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
ffff888106ef2880: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
>ffff888106ef2900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888106ef2980: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
ffff888106ef2a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: 314001f0bf ("af_unix: Add OOB support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jann Horn <jannh@google.com>
Link: https://patch.msgid.link/20250619041457.1132791-2-kuni1840@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In some rare randconfig builds, I seem to trigger a bug in clang where
it unrolls a loop but then runs out of registers, which then get
spilled to the stack:
net/wireless/intel/iwlegacy/4965-rs.c:2262:1: error: stack frame size (1696) exceeds limit (1280) in 'il4965_rs_rate_init' [-Werror,-Wframe-larger-than]
This seems to be the same one I saw in the omapdrm driver, and there is
an easy workaround by not inlining the il4965_rs_rate_scale_clear_win
function.
Link: https://github.com/llvm/llvm-project/issues/143908
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20250620113946.3987160-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jerome Marchand says:
====================
bpf: Specify access type of bpf_sysctl_get_name args
The second argument of bpf_sysctl_get_name() helper is a pointer to a
buffer that is being written to. However that isn't specify in the
prototype. Until commit 37cce22dbd ("bpf: verifier: Refactor helper
access type tracking") that mistake was hidden by the way the verifier
treated helper accesses. Since then, the verifier, working on wrong
infromation from the prototype, can make faulty optimization that
would had been caught by the test_sysctl selftests if it was run by
the CI.
The first patch fixes bpf_sysctl_get_name prototype.
The second patch converts the test_sysctl to prog_tests so that it
will be run by the CI and catch similar issues in the future.
Changes in v3:
- Use ASSERT* macro instead of CHECK_FAIL.
- Remove useless code.
Changes in v2:
- Replace ARG_PTR_TO_UNINIT_MEM by ARG_PTR_TO_MEM | MEM_WRITE.
- Converts test_sysctl to prog_tests.
====================
Link: https://patch.msgid.link/20250619140603.148942-1-jmarchan@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The second argument of bpf_sysctl_get_name() helper is a pointer to a
buffer that is being written to. However that isn't specify in the
prototype.
Until commit 37cce22dbd ("bpf: verifier: Refactor helper access
type tracking"), all helper accesses were considered as a possible
write access by the verifier, so no big harm was done. However, since
then, the verifier might make wrong asssumption about the content of
that address which might lead it to make faulty optimizations (such as
removing code that was wrongly labeled dead). This is what happens in
test_sysctl selftest to the tests related to sysctl_get_name.
Add MEM_WRITE flag the second argument of bpf_sysctl_get_name().
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250619140603.148942-2-jmarchan@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bridge maintains a global list of ports behind which a multicast
router resides. The list is consulted during forwarding to ensure
multicast packets are forwarded to these ports even if the ports are not
member in the matching MDB entry.
When per-VLAN multicast snooping is enabled, the per-port multicast
context is disabled on each port and the port is removed from the global
router port list:
# ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1
# ip link add name dummy1 up master br1 type dummy
# ip link set dev dummy1 type bridge_slave mcast_router 2
$ bridge -d mdb show | grep router
router ports on br1: dummy1
# ip link set dev br1 type bridge mcast_vlan_snooping 1
$ bridge -d mdb show | grep router
However, the port can be re-added to the global list even when per-VLAN
multicast snooping is enabled:
# ip link set dev dummy1 type bridge_slave mcast_router 0
# ip link set dev dummy1 type bridge_slave mcast_router 2
$ bridge -d mdb show | grep router
router ports on br1: dummy1
Since commit 4b30ae9adb ("net: bridge: mcast: re-implement
br_multicast_{enable, disable}_port functions"), when per-VLAN multicast
snooping is enabled, multicast disablement on a port will disable the
per-{port, VLAN} multicast contexts and not the per-port one. As a
result, a port will remain in the global router port list even after it
is deleted. This will lead to a use-after-free [1] when the list is
traversed (when adding a new port to the list, for example):
# ip link del dev dummy1
# ip link add name dummy2 up master br1 type dummy
# ip link set dev dummy2 type bridge_slave mcast_router 2
Similarly, stale entries can also be found in the per-VLAN router port
list. When per-VLAN multicast snooping is disabled, the per-{port, VLAN}
contexts are disabled on each port and the port is removed from the
per-VLAN router port list:
# ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1
# ip link add name dummy1 up master br1 type dummy
# bridge vlan add vid 2 dev dummy1
# bridge vlan global set vid 2 dev br1 mcast_snooping 1
# bridge vlan set vid 2 dev dummy1 mcast_router 2
$ bridge vlan global show dev br1 vid 2 | grep router
router ports: dummy1
# ip link set dev br1 type bridge mcast_vlan_snooping 0
$ bridge vlan global show dev br1 vid 2 | grep router
However, the port can be re-added to the per-VLAN list even when
per-VLAN multicast snooping is disabled:
# bridge vlan set vid 2 dev dummy1 mcast_router 0
# bridge vlan set vid 2 dev dummy1 mcast_router 2
$ bridge vlan global show dev br1 vid 2 | grep router
router ports: dummy1
When the VLAN is deleted from the port, the per-{port, VLAN} multicast
context will not be disabled since multicast snooping is not enabled
on the VLAN. As a result, the port will remain in the per-VLAN router
port list even after it is no longer member in the VLAN. This will lead
to a use-after-free [2] when the list is traversed (when adding a new
port to the list, for example):
# ip link add name dummy2 up master br1 type dummy
# bridge vlan add vid 2 dev dummy2
# bridge vlan del vid 2 dev dummy1
# bridge vlan set vid 2 dev dummy2 mcast_router 2
Fix these issues by removing the port from the relevant (global or
per-VLAN) router port list in br_multicast_port_ctx_deinit(). The
function is invoked during port deletion with the per-port multicast
context and during VLAN deletion with the per-{port, VLAN} multicast
context.
Note that deleting the multicast router timer is not enough as it only
takes care of the temporary multicast router states (1 or 3) and not the
permanent one (2).
[1]
BUG: KASAN: slab-out-of-bounds in br_multicast_add_router.part.0+0x3f1/0x560
Write of size 8 at addr ffff888004a67328 by task ip/384
[...]
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x6f/0x350
print_report+0x108/0x205
kasan_report+0xdf/0x110
br_multicast_add_router.part.0+0x3f1/0x560
br_multicast_set_port_router+0x74e/0xac0
br_setport+0xa55/0x1870
br_port_slave_changelink+0x95/0x120
__rtnl_newlink+0x5e8/0xa40
rtnl_newlink+0x627/0xb00
rtnetlink_rcv_msg+0x6fb/0xb70
netlink_rcv_skb+0x11f/0x350
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
__sys_sendmsg+0x124/0x1c0
do_syscall_64+0xbb/0x360
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[2]
BUG: KASAN: slab-use-after-free in br_multicast_add_router.part.0+0x378/0x560
Read of size 8 at addr ffff888009f00840 by task bridge/391
[...]
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x6f/0x350
print_report+0x108/0x205
kasan_report+0xdf/0x110
br_multicast_add_router.part.0+0x378/0x560
br_multicast_set_port_router+0x6f9/0xac0
br_vlan_process_options+0x8b6/0x1430
br_vlan_rtm_process_one+0x605/0xa30
br_vlan_rtm_process+0x396/0x4c0
rtnetlink_rcv_msg+0x2f7/0xb70
netlink_rcv_skb+0x11f/0x350
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
__sys_sendmsg+0x124/0x1c0
do_syscall_64+0xbb/0x360
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: 2796d846d7 ("net: bridge: vlan: convert mcast router global option to per-vlan entry")
Fixes: 4b30ae9adb ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions")
Reported-by: syzbot+7bfa4b72c6a5da128d32@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/684c18bd.a00a0220.279073.000b.GAE@google.com/T/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250619182228.1656906-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change error values of `ionic_tx_map_single()` and `ionic_tx_map_frag()`
from 0 to `DMA_MAPPING_ERROR` to prevent collision with 0 as a valid
address.
This also fixes the use of `dma_mapping_error()` to test against 0 in
`ionic_xdp_post_frame()`
Fixes: 0f3154e6bc ("ionic: Add Tx and Rx handling")
Fixes: 56e41ee12d ("ionic: better dma-map error handling")
Fixes: ac8813c0ab ("ionic: convert Rx queue buffers to use page_pool")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20250619094538.283723-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit ad5643cf2f ("riscv: Define TASK_SIZE_MAX for
__access_ok()").
This commit changes TASK_SIZE_MAX to be LONG_MAX to optimize access_ok(),
because the previous TASK_SIZE_MAX (default to TASK_SIZE) requires some
computation.
The reasoning was that all user addresses are less than LONG_MAX, and all
kernel addresses are greater than LONG_MAX. Therefore access_ok() can
filter kernel addresses.
Addresses between TASK_SIZE and LONG_MAX are not valid user addresses, but
access_ok() let them pass. That was thought to be okay, because they are
not valid addresses at hardware level.
Unfortunately, one case is missed: get_user_pages_fast() happily accepts
addresses between TASK_SIZE and LONG_MAX. futex(), for instance, uses
get_user_pages_fast(). This causes the problem reported by Robert [1].
Therefore, revert this commit. TASK_SIZE_MAX is changed to the default:
TASK_SIZE.
This unfortunately reduces performance, because TASK_SIZE is more expensive
to compute compared to LONG_MAX. But correctness first, we can think about
optimization later, if required.
Reported-by: <rtm@csail.mit.edu>
Closes: https://lore.kernel.org/linux-riscv/77605.1750245028@localhost/
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Fixes: ad5643cf2f ("riscv: Define TASK_SIZE_MAX for __access_ok()")
Link: https://lore.kernel.org/r/20250619155858.1249789-1-namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Pull device mapper fixes from Mikulas Patocka:
- dm-crypt: fix a crash on 32-bit machines
- dm-raid: replace "rdev" with correct loop variable name "r"
* tag 'for-6.16/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-raid: fix variable in journal device check
dm-crypt: Extend state buffer size in crypt_iv_lmk_one
Pull f2fs fixes from Jaegeuk Kim:
- fix double-unlock introduced by the recent folio conversion
- fix stale page content beyond EOF complained by xfstests/generic/363
* tag 'f2fs-for-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: fix to zero post-eof page
f2fs: Fix __write_node_folio() conversion
Pull btrfs fixes from David Sterba:
"Fixes:
- fix invalid inode pointer dereferences during log replay
- fix a race between renames and directory logging
- fix shutting down delayed iput worker
- fix device byte accounting when dropping chunk
- in zoned mode, fix offset calculations for DUP profile when
conventional and sequential zones are used together
Regression fixes:
- fix possible double unlock of extent buffer tree (xarray
conversion)
- in zoned mode, fix extent buffer refcount when writing out extents
(xarray conversion)
Error handling fixes and updates:
- handle unexpected extent type when replaying log
- check and warn if there are remaining delayed inodes when putting a
root
- fix assertion when building free space tree
- handle csum tree error with mount option 'rescue=ibadroot'
Other:
- error message updates: add prefix to all scrub related messages,
include other information in messages"
* tag 'for-6.16-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: fix alloc_offset calculation for partly conventional block groups
btrfs: handle csum tree error with rescue=ibadroots correctly
btrfs: fix race between async reclaim worker and close_ctree()
btrfs: fix assertion when building free space tree
btrfs: don't silently ignore unexpected extent type when replaying log
btrfs: fix invalid inode pointer dereferences during log replay
btrfs: fix double unlock of buffer_tree xarray when releasing subpage eb
btrfs: update superblock's device bytes_used when dropping chunk
btrfs: fix a race between renames and directory logging
btrfs: scrub: add prefix for the error messages
btrfs: warn if leaking delayed_nodes in btrfs_put_root()
btrfs: fix delayed ref refcount leak in debug assertion
btrfs: include root in error message when unlinking inode
btrfs: don't drop a reference if btrfs_check_write_meta_pointer() fails
When btf_dump__new() fails to allocate memory for the internal hashmap
(btf_dump->type_names), it returns an error code. However, the cleanup
function btf_dump__free() does not check if btf_dump->type_names is NULL
before attempting to free it. This leads to a null pointer dereference
when btf_dump__free() is called on a btf_dump object.
Fixes: 351131b51c ("libbpf: add btf_dump API for BTF-to-C conversion")
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250618011933.11423-1-chenyuan_fl@163.com
If we are propagating across the userns boundary, we need to lock the
mounts added there. However, in case when something has already
been mounted there and we end up sliding a new tree under that,
the stuff that had been there before should not get locked.
IOW, lock_mnt_tree() should be called before we reparent the
preexisting tree on top of what we are adding.
Fixes: 3bd045cc9c ("separate copying and locking mount tree on cross-userns copies")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
collect_mounts() has several problems - one can't iterate over the results
directly, so it has to be done with callback passed to iterate_mounts();
it has an oopsable race with d_invalidate(); it creates temporary clones
of mounts invisibly for sync umount (IOW, you can have non-lazy umount
succeed leaving filesystem not mounted anywhere and yet still busy).
A saner approach is to give caller an array of struct path that would pin
every mount in a subtree, without cloning any mounts.
* collect_mounts()/drop_collected_mounts()/iterate_mounts() is gone
* collect_paths(where, preallocated, size) gives either ERR_PTR(-E...) or
a pointer to array of struct path, one for each chunk of tree visible under
'where' (i.e. the first element is a copy of where, followed by (mount,root)
for everything mounted under it - the same set collect_mounts() would give).
Unlike collect_mounts(), the mounts are *not* cloned - we just get pinning
references to the roots of subtrees in the caller's namespace.
Array is terminated by {NULL, NULL} struct path. If it fits into
preallocated array (on-stack, normally), that's where it goes; otherwise
it's allocated by kmalloc_array(). Passing 0 as size means that 'preallocated'
is ignored (and expected to be NULL).
* drop_collected_paths(paths, preallocated) is given the array returned
by an earlier call of collect_paths() and the preallocated array passed to that
call. All mount/dentry references are dropped and array is kfree'd if it's not
equal to 'preallocated'.
* instead of iterate_mounts(), users should just iterate over array
of struct path - nothing exotic is needed for that. Existing users (all in
audit_tree.c) are converted.
[folded a fix for braino reported by Venkat Rao Bagalkote <venkat88@linux.ibm.com>]
Fixes: 80b5dce8c5 ("vfs: Add a function to lazily unmount all mounts from any dentry")
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull misc fixes from Andrew Morton:
"20 hotfixes. 7 are cc:stable and the remainder address post-6.15
issues or aren't considered necessary for -stable kernels. Only 4 are
for MM.
- The series `Revert "bcache: update min_heap_callbacks to use
default builtin swap"' from Kuan-Wei Chiu backs out the author's
recent min_heap changes due to a performance regression.
A fix for this regression has been developed but we felt it best to
go back to the known-good version to give the new code more bake
time.
- A lot of MAINTAINERS maintenance.
I like to get these changes upstreamed promptly because they can't
break things and more accurate/complete MAINTAINERS info hopefully
improves the speed and accuracy of our responses to submitters and
reporters"
* tag 'mm-hotfixes-stable-2025-06-22-18-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add additional mmap-related files to mmap section
MAINTAINERS: add memfd, shmem quota files to shmem section
MAINTAINERS: add stray rmap file to mm rmap section
MAINTAINERS: add hugetlb_cgroup.c to hugetlb section
MAINTAINERS: add further init files to mm init block
MAINTAINERS: update maintainers for HugeTLB
maple_tree: fix MA_STATE_PREALLOC flag in mas_preallocate()
MAINTAINERS: add missing test files to mm gup section
MAINTAINERS: add missing mm/workingset.c file to mm reclaim section
selftests/mm: skip uprobe vma merge test if uprobes are not enabled
bcache: remove unnecessary select MIN_HEAP
Revert "bcache: remove heap-related macros and switch to generic min_heap"
Revert "bcache: update min_heap_callbacks to use default builtin swap"
selftests/mm: add configs to fix testcase failure
kho: initialize tail pages for higher order folios properly
MAINTAINERS: add linux-mm@ list to Kexec Handover
mm: userfaultfd: fix race of userfaultfd_move and swap cache
mm/gup: revert "mm: gup: fix infinite loop within __get_longterm_locked"
selftests/mm: increase timeout from 180 to 900 seconds
mm/shmem, swap: fix softlockup with mTHP swapin
In snd_usb_get_audioformat_uac3(), the length value returned from
snd_usb_ctl_msg() is used directly for memory allocation without
validation. This length is controlled by the USB device.
The allocated buffer is cast to a uac3_cluster_header_descriptor
and its fields are accessed without verifying that the buffer
is large enough. If the device returns a smaller than expected
length, this leads to an out-of-bounds read.
Add a length check to ensure the buffer is large enough for
uac3_cluster_header_descriptor.
Signed-off-by: Youngjun Lee <yjjuny.lee@samsung.com>
Fixes: 9a2fe9b801 ("ALSA: usb: initial USB Audio Device Class 3.0 support")
Link: https://patch.msgid.link/20250623-uac3-oob-fix-v1-1-527303eaf40a@samsung.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
syzbot reported use-after-free in vhci_flush() without repro. [0]
From the splat, a thread close()d a vhci file descriptor while
its device was being used by iotcl() on another thread.
Once the last fd refcnt is released, vhci_release() calls
hci_unregister_dev(), hci_free_dev(), and kfree() for struct
vhci_data, which is set to hci_dev->dev->driver_data.
The problem is that there is no synchronisation after unlinking
hdev from hci_dev_list in hci_unregister_dev(). There might be
another thread still accessing the hdev which was fetched before
the unlink operation.
We can use SRCU for such synchronisation.
Let's run hci_dev_reset() under SRCU and wait for its completion
in hci_unregister_dev().
Another option would be to restore hci_dev->destruct(), which was
removed in commit 587ae086f6 ("Bluetooth: Remove unused
hci-destruct cb"). However, this would not be a good solution, as
we should not run hci_unregister_dev() while there are in-flight
ioctl() requests, which could lead to another data-race KCSAN splat.
Note that other drivers seem to have the same problem, for exmaple,
virtbt_remove().
[0]:
BUG: KASAN: slab-use-after-free in skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline]
BUG: KASAN: slab-use-after-free in skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937
Read of size 8 at addr ffff88807cb8d858 by task syz.1.219/6718
CPU: 1 UID: 0 PID: 6718 Comm: syz.1.219 Not tainted 6.16.0-rc1-syzkaller-00196-g08207f42d3ff #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xd2/0x2b0 mm/kasan/report.c:521
kasan_report+0x118/0x150 mm/kasan/report.c:634
skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline]
skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937
skb_queue_purge include/linux/skbuff.h:3368 [inline]
vhci_flush+0x44/0x50 drivers/bluetooth/hci_vhci.c:69
hci_dev_do_reset net/bluetooth/hci_core.c:552 [inline]
hci_dev_reset+0x420/0x5c0 net/bluetooth/hci_core.c:592
sock_do_ioctl+0xd9/0x300 net/socket.c:1190
sock_ioctl+0x576/0x790 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fcf5b98e929
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fcf5c7b9038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fcf5bbb6160 RCX: 00007fcf5b98e929
RDX: 0000000000000000 RSI: 00000000400448cb RDI: 0000000000000009
RBP: 00007fcf5ba10b39 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007fcf5bbb6160 R15: 00007ffd6353d528
</TASK>
Allocated by task 6535:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
vhci_open+0x57/0x360 drivers/bluetooth/hci_vhci.c:635
misc_open+0x2bc/0x330 drivers/char/misc.c:161
chrdev_open+0x4c9/0x5e0 fs/char_dev.c:414
do_dentry_open+0xdf0/0x1970 fs/open.c:964
vfs_open+0x3b/0x340 fs/open.c:1094
do_open fs/namei.c:3887 [inline]
path_openat+0x2ee5/0x3830 fs/namei.c:4046
do_filp_open+0x1fa/0x410 fs/namei.c:4073
do_sys_openat2+0x121/0x1c0 fs/open.c:1437
do_sys_open fs/open.c:1452 [inline]
__do_sys_openat fs/open.c:1468 [inline]
__se_sys_openat fs/open.c:1463 [inline]
__x64_sys_openat+0x138/0x170 fs/open.c:1463
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 6535:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x62/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2381 [inline]
slab_free mm/slub.c:4643 [inline]
kfree+0x18e/0x440 mm/slub.c:4842
vhci_release+0xbc/0xd0 drivers/bluetooth/hci_vhci.c:671
__fput+0x44c/0xa70 fs/file_table.c:465
task_work_run+0x1d1/0x260 kernel/task_work.c:227
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0x6ad/0x22e0 kernel/exit.c:955
do_group_exit+0x21c/0x2d0 kernel/exit.c:1104
__do_sys_exit_group kernel/exit.c:1115 [inline]
__se_sys_exit_group kernel/exit.c:1113 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1113
x64_sys_call+0x21ba/0x21c0 arch/x86/include/generated/asm/syscalls_64.h:232
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ffff88807cb8d800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 88 bytes inside of
freed 1024-byte region [ffff88807cb8d800, ffff88807cb8dc00)
Fixes: bf18c7118c ("Bluetooth: vhci: Free driver_data on file release")
Reported-by: syzbot+2faa4825e556199361f9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f62d64848fc4c7c30cd6
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
clang gets a bit confused by the code in the qed_mfw_process_tlv_req and
ends up spilling registers to the stack hundreds of times. When sanitizers
are enabled, this can end up blowing the stack warning limit:
drivers/net/ethernet/qlogic/qed/qed_mng_tlv.c:1244:5: error: stack frame size (1824) exceeds limit (1280) in 'qed_mfw_process_tlv_req' [-Werror,-Wframe-larger-than]
Apparently the problem is the complexity of qed_mfw_update_tlvs()
after inlining, and marking the four main branches of that function
as noinline_for_stack makes this problem completely go away, the stack
usage goes down to 100 bytes.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During the hibernate entry sequence, ACP registers will be reset to
default values and acp ip will be completely powered off including acp
SoundWire pads. During resume sequence, if acp SoundWire pad keeper enable
register is not restored along with pad pulldown control register value,
then SoundWire manager links won't be powered on correctly results in
peripheral register access failures and completely audio function is
broken.
Add code to store the acp SoundWire pad keeper enable register and acp pad
pulldown ctrl register values before entering into suspend state and
restore the register values during resume sequence based on condition check
for acp SoundWire pad keeper enable register for ACP6.3, ACP7.0 & ACP7.1
platforms.
Fixes: 4916283880 ("ASoC: amd: ps: add callback functions for acp pci driver pm ops")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20250623084630.3100279-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Reading DPCD registers has side-effects in general. In particular
accessing registers outside of the link training register range
(0x102-0x106, 0x202-0x207, 0x200c-0x200f, 0x2216) is explicitly
forbidden by the DP v2.1 Standard, see
3.6.5.1 DPTX AUX Transaction Handling Mandates
3.6.7.4 128b/132b DP Link Layer LTTPR Link Training Mandates
Based on my tests, accessing the DPCD_REV register during the link
training of an UHBR TBT DP tunnel sink leads to link training failures.
Solve the above by using the DP_LANE0_1_STATUS (0x202) register for the
DPCD register access quirk.
Cc: <stable@vger.kernel.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250605082850.65136-2-imre.deak@intel.com
(cherry picked from commit a40c5d727b)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
