The delstid draft adds new NFS4_SHARE_WANT_TYPE_MASK values that don't
fit neatly into the existing WANT_MASK or WHEN_MASK. Add a new
NFS4_SHARE_WANT_MOD_MASK value and redefine NFS4_SHARE_WANT_MASK to
include it.
Also fix the checks in nfsd4_deleg_xgrade_none_ext() to check for the
flags instead of equality, since there may be modifier flags in the
value.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add a more advanced BAR test that writes all BARs in one go, and then reads
them back and verifies that the value matches the BAR number bitwise OR'ed
with offset, this allows us to verify:
- The BAR number was what we intended to read
- The offset was what we intended to read
This allows us to detect potential address translation issues on the EP.
Reading back the BAR directly after writing will not allow us to detect the
case where inbound address translation on the endpoint incorrectly causes
multiple BARs to be redirected to the same memory region (within the EP).
Link: https://lore.kernel.org/r/20241116032045.2574168-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Pull io_uring updates from Jens Axboe:
"Not a lot in terms of features this time around, mostly just cleanups
and code consolidation:
- Support for PI meta data read/write via io_uring, with NVMe and
SCSI covered
- Cleanup the per-op structure caching, making it consistent across
various command types
- Consolidate the various user mapped features into a concept called
regions, making the various users of that consistent
- Various cleanups and fixes"
* tag 'for-6.14/io_uring-20250119' of git://git.kernel.dk/linux: (56 commits)
io_uring/fdinfo: fix io_uring_show_fdinfo() misuse of ->d_iname
io_uring: reuse io_should_terminate_tw() for cmds
io_uring: Factor out a function to parse restrictions
io_uring/rsrc: require cloned buffers to share accounting contexts
io_uring: simplify the SQPOLL thread check when cancelling requests
io_uring: expose read/write attribute capability
io_uring/rw: don't gate retry on completion context
io_uring/rw: handle -EAGAIN retry at IO completion time
io_uring/rw: use io_rw_recycle() from cleanup path
io_uring/rsrc: simplify the bvec iter count calculation
io_uring: ensure io_queue_deferred() is out-of-line
io_uring/rw: always clear ->bytes_done on io_async_rw setup
io_uring/rw: use NULL for rw->free_iovec assigment
io_uring/rw: don't mask in f_iocb_flags
io_uring/msg_ring: Drop custom destructor
io_uring: Move old async data allocation helper to header
io_uring/rw: Allocate async data through helper
io_uring/net: Allocate msghdr async data through helper
io_uring/uring_cmd: Allocate async data through generic helper
io_uring/poll: Allocate apoll with generic alloc_cache helper
...
Pull block updates from Jens Axboe:
- NVMe pull requests via Keith:
- Target support for PCI-Endpoint transport (Damien)
- TCP IO queue spreading fixes (Sagi, Chaitanya)
- Target handling for "limited retry" flags (Guixen)
- Poll type fix (Yongsoo)
- Xarray storage error handling (Keisuke)
- Host memory buffer free size fix on error (Francis)
- MD pull requests via Song:
- Reintroduce md-linear (Yu Kuai)
- md-bitmap refactor and fix (Yu Kuai)
- Replace kmap_atomic with kmap_local_page (David Reaver)
- Quite a few queue freeze and debugfs deadlock fixes
Ming introduced lockdep support for this in the 6.13 kernel, and it
has (unsurprisingly) uncovered quite a few issues
- Use const attributes for IO schedulers
- Remove bio ioprio wrappers
- Fixes for stacked device atomic write support
- Refactor queue affinity helpers, in preparation for better supporting
isolated CPUs
- Cleanups of loop O_DIRECT handling
- Cleanup of BLK_MQ_F_* flags
- Add rotational support for null_blk
- Various fixes and cleanups
* tag 'for-6.14/block-20250118' of git://git.kernel.dk/linux: (106 commits)
block: Don't trim an atomic write
block: Add common atomic writes enable flag
md/md-linear: Fix a NULL vs IS_ERR() bug in linear_add()
block: limit disk max sectors to (LLONG_MAX >> 9)
block: Change blk_stack_atomic_writes_limits() unit_min check
block: Ensure start sector is aligned for stacking atomic writes
blk-mq: Move more error handling into blk_mq_submit_bio()
block: Reorder the request allocation code in blk_mq_submit_bio()
nvme: fix bogus kzalloc() return check in nvme_init_effects_log()
md/md-bitmap: move bitmap_{start, end}write to md upper layer
md/raid5: implement pers->bitmap_sector()
md: add a new callback pers->bitmap_sector()
md/md-bitmap: remove the last parameter for bimtap_ops->endwrite()
md/md-bitmap: factor behind write counters out from bitmap_{start/end}write()
md: Replace deprecated kmap_atomic() with kmap_local_page()
md: reintroduce md-linear
partitions: ldm: remove the initial kernel-doc notation
blk-cgroup: rwstat: fix kernel-doc warnings in header file
blk-cgroup: fix kernel-doc warnings in header file
nbd: fix partial sending
...
Pull vfs direct-io updates from Christian Brauner:
"File systems that write out of place usually require different
alignment for direct I/O writes than what they can do for reads.
Add a separate dio read align field to statx, as many out of place
write file systems can easily do reads aligned to the device sector
size, but require bigger alignment for writes.
This is usually papered over by falling back to buffered I/O for
smaller writes and doing read-modify-write cycles, but performance for
this sucks, so applications benefit from knowing the actual write
alignment"
* tag 'vfs-6.14-rc1.statx.dio' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
xfs: report larger dio alignment for COW inodes
xfs: report the correct read/write dio alignment for reflinked inodes
xfs: cleanup xfs_vn_getattr
fs: add STATX_DIO_READ_ALIGN
fs: reformat the statx definition
Pull misc vfs updates from Christian Brauner:
"Features:
- Support caching symlink lengths in inodes
The size is stored in a new union utilizing the same space as
i_devices, thus avoiding growing the struct or taking up any more
space
When utilized it dodges strlen() in vfs_readlink(), giving about
1.5% speed up when issuing readlink on /initrd.img on ext4
- Add RWF_DONTCACHE iocb and FOP_DONTCACHE file_operations flag
If a file system supports uncached buffered IO, it may set
FOP_DONTCACHE and enable support for RWF_DONTCACHE.
If RWF_DONTCACHE is attempted without the file system supporting
it, it'll get errored with -EOPNOTSUPP
- Enable VBOXGUEST and VBOXSF_FS on ARM64
Now that VirtualBox is able to run as a host on arm64 (e.g. the
Apple M3 processors) we can enable VBOXSF_FS (and in turn
VBOXGUEST) for this architecture.
Tested with various runs of bonnie++ and dbench on an Apple MacBook
Pro with the latest Virtualbox 7.1.4 r165100 installed
Cleanups:
- Delay sysctl_nr_open check in expand_files()
- Use kernel-doc includes in fiemap docbook
- Use page->private instead of page->index in watch_queue
- Use a consume fence in mnt_idmap() as it's heavily used in
link_path_walk()
- Replace magic number 7 with ARRAY_SIZE() in fc_log
- Sort out a stale comment about races between fd alloc and dup2()
- Fix return type of do_mount() from long to int
- Various cosmetic cleanups for the lockref code
Fixes:
- Annotate spinning as unlikely() in __read_seqcount_begin
The annotation already used to be there, but got lost in commit
52ac39e5db ("seqlock: seqcount_t: Implement all read APIs as
statement expressions")
- Fix proc_handler for sysctl_nr_open
- Flush delayed work in delayed fput()
- Fix grammar and spelling in propagate_umount()
- Fix ESP not readable during coredump
In /proc/PID/stat, there is the kstkesp field which is the stack
pointer of a thread. While the thread is active, this field reads
zero. But during a coredump, it should have a valid value
However, at the moment, kstkesp is zero even during coredump
- Don't wake up the writer if the pipe is still full
- Fix unbalanced user_access_end() in select code"
* tag 'vfs-6.14-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (28 commits)
gfs2: use lockref_init for qd_lockref
erofs: use lockref_init for pcl->lockref
dcache: use lockref_init for d_lockref
lockref: add a lockref_init helper
lockref: drop superfluous externs
lockref: use bool for false/true returns
lockref: improve the lockref_get_not_zero description
lockref: remove lockref_put_not_zero
fs: Fix return type of do_mount() from long to int
select: Fix unbalanced user_access_end()
vbox: Enable VBOXGUEST and VBOXSF_FS on ARM64
pipe_read: don't wake up the writer if the pipe is still full
selftests: coredump: Add stackdump test
fs/proc: do_task_stat: Fix ESP not readable during coredump
fs: add RWF_DONTCACHE iocb and FOP_DONTCACHE file_operations flag
fs: sort out a stale comment about races between fd alloc and dup2
fs: Fix grammar and spelling in propagate_umount()
fs: fc_log replace magic number 7 with ARRAY_SIZE()
fs: use a consume fence in mnt_idmap()
file: flush delayed work in delayed fput()
...
ASoC: Updates for v6.14
This was quite a quiet release for what I imagine are holiday related
reasons, the diffstat is dominated by some Cirrus Logic Kunit tests.
There's the usual mix of small improvements and fixes, plus a few new
drivers and features. The diffstat includes some DRM changes due to
work on HDMI audio.
- Allow clocking on each DAI in an audio graph card to be configured
separately.
- Improved power management for Renesas RZ-SSI.
- KUnit testing for the Cirrus DSP framework.
- Memory to meory operation support for Freescale/NXP platforms.
- Support for pause operations in SOF.
- Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek
ALC5682I-VE
KVM x86 misc changes for 6.14:
- Overhaul KVM's CPUID feature infrastructure to track all vCPU capabilities
instead of just those where KVM needs to manage state and/or explicitly
enable the feature in hardware. Along the way, refactor the code to make
it easier to add features, and to make it more self-documenting how KVM
is handling each feature.
- Rework KVM's handling of VM-Exits during event vectoring; this plugs holes
where KVM unintentionally puts the vCPU into infinite loops in some scenarios
(e.g. if emulation is triggered by the exit), and brings parity between VMX
and SVM.
- Add pending request and interrupt injection information to the kvm_exit and
kvm_entry tracepoints respectively.
- Fix a relatively benign flaw where KVM would end up redoing RDPKRU when
loading guest/host PKRU, due to a refactoring of the kernel helpers that
didn't account for KVM's pre-checking of the need to do WRPKRU.
Kalle Valo says:
====================
wireless-next patches for v6.14
Most likely the last "new features" pull request for v6.14 and this is
a bigger one. Multi-Link Operation (MLO) work continues both in stack
in drivers. Few new devices supported and usual fixes all over.
Major changes:
cfg80211
* Emergency Preparedness Communication Services (EPCS) station mode support
mac80211
* an option to filter a sta from being flushed
* some support for RX Operating Mode Indication (OMI) power saving
* support for adding and removing station links for MLO
iwlwifi
* new device ids
* rework firmware error handling and restart
rtw88
* RTL8812A: RFE type 2 support
* LED support
rtw89
* variant info to support RTL8922AE-VS
mt76
* mt7996: single wiphy multiband support (preparation for MLO)
* mt7996: support for more variants
* mt792x: P2P_DEVICE support
* mt7921u: TP-Link TXE50UH support
ath12k
* enable MLO for QCN9274 (although it seems to be broken with dual
band devices)
* MLO radar detection support
* debugfs: transmit buffer OFDMA, AST entry and puncture stats
* tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (322 commits)
wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize()
wifi: rtw88: add RTW88_LEDS depends on LEDS_CLASS to Kconfig
wifi: wilc1000: unregister wiphy only after netdev registration
wifi: cfg80211: adjust allocation of colocated AP data
wifi: mac80211: fix memory leak in ieee80211_mgd_assoc_ml_reconf()
wifi: ath12k: fix key cache handling
wifi: ath12k: Fix uninitialized variable access in ath12k_mac_allocate() function
wifi: ath12k: Remove ath12k_get_num_hw() helper function
wifi: ath12k: Refactor the ath12k_hw get helper function argument
wifi: ath12k: Refactor ath12k_hw set helper function argument
wifi: mt76: mt7996: add implicit beamforming support for mt7992
wifi: mt76: mt7996: fix beacon command during disabling
wifi: mt76: mt7996: fix ldpc setting
wifi: mt76: mt7996: fix definition of tx descriptor
wifi: mt76: connac: adjust phy capabilities based on band constraints
wifi: mt76: mt7996: fix incorrect indexing of MIB FW event
wifi: mt76: mt7996: fix HE Phy capability
wifi: mt76: mt7996: fix the capability of reception of EHT MU PPDU
wifi: mt76: mt7996: add max mpdu len capability
wifi: mt76: mt7921: avoid undesired changes of the preset regulatory domain
...
====================
Link: https://patch.msgid.link/20250117203529.72D45C4CEDD@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using the ioctl command 'UBI_IOCECNFO' user space can obtain
detailed erase counter information of all blocks of a device.
Signed-off-by: Rickard Andersson <rickard.andersson@axis.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Add a new kernel driver for the Focusrite Control Protocol (FCP),
which is used by Focusrite Scarlett 2nd Gen, 3rd Gen, 4th Gen, Clarett
USB, Clarett+, and Vocaster series audio interfaces. This driver
provides a user-space control interface via ALSA's hwdep subsystem.
Unlike the existing Scarlett2 driver which implements all ALSA
controls in kernel space, this new FCP driver takes a different
approach by providing a minimal kernel interface that allows a
user-space driver to send FCP commands and receive notifications. The
only control implemented in kernel space is the Level Meter, since it
requires frequent polling of volatile data.
While this driver supports all interfaces that the Scarlett2 driver
works with, it is initially enabled only for 4th Gen 16i16, 18i16,
and 18i20 interfaces that are not supported by the Scarlett2 driver.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/597741a9b1198b965561547511d3d345f91cba20.1737048528.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For packets with two-step timestamp requests, the hardware timestamp
comes back to the driver through a confirmation mechanism of sorts,
which allows the driver to confidently bump the successful "pkts"
counter.
For one-step PTP, the NIC is supposed to autonomously insert its
hardware TX timestamp in the packet headers while simultaneously
transmitting it. There may be a confirmation that this was done
successfully, or there may not.
None of the current drivers which implement ethtool_ops :: get_ts_stats()
also support HWTSTAMP_TX_ONESTEP_SYNC or HWTSTAMP_TX_ONESTEP_SYNC, so it
is a bit unclear which model to follow. But there are NICs, such as DSA,
where there is no transmit confirmation at all. Here, it would be wrong /
misleading to increment the successful "pkts" counter, because one-step
PTP packets can be dropped on TX just like any other packets.
So introduce a special counter which signifies "yes, an attempt was made,
but we don't know whether it also exited the port or not". I expect that
for one-step PTP packets where a confirmation is available, the "pkts"
counter would be bumped.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250116104628.123555-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support stacking atomic write limits for DM devices.
All the pre-existing code in blk_stack_atomic_writes_limits() already takes
care of finding the aggregrate limits from the bottom devices.
Feature flag DM_TARGET_ATOMIC_WRITES is introduced so that atomic writes
can be enabled on personalities selectively. This is to ensure that atomic
writes are only enabled when verified to be working properly (for a
specific personality). In addition, it just may not make sense to enable
atomic writes on some personalities (so this flag also helps there).
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
pcie_read_tlp_log() handles only 4 Header Log DWORDs but TLP Prefix Log
(PCIe r6.1 secs 7.8.4.12 & 7.9.14.13) may also be present.
Generalize pcie_read_tlp_log() and struct pcie_tlp_log to also handle TLP
Prefix Log. The relevant registers are formatted identically in AER and DPC
Capability, but has these variations:
a) The offsets of TLP Prefix Log registers vary.
b) DPC RP PIO TLP Prefix Log register can be < 4 DWORDs.
c) AER TLP Prefix Log Present (PCIe r6.1 sec 7.8.4.7) can indicate Prefix
Log is not present.
Therefore callers must pass the offset of the TLP Prefix Log register and
the entire length to pcie_read_tlp_log() to be able to read the correct
number of TLP Prefix DWORDs from the correct offset.
Link: https://lore.kernel.org/r/20250114170840.1633-8-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash ternary fix from
https://lore.kernel.org/r/20250116172019.88116-1-colin.i.king@gmail.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In order to avoid having userspace to use MI_MEM_FENCE,
we are adding a mechanism for userspace to generate a
PCI memory barrier with low overhead (avoiding IOCTL call
as well as writing to VRAM will adds some overhead).
This is implemented by memory-mapping a page as uncached
that is backed by MMIO on the dGPU and thus allowing userspace
to do memory write to the page without invoking an IOCTL.
We are selecting the MMIO so that it is not accessible from
the PCI bus so that the MMIO writes themselves are ignored,
but the PCI memory barrier will still take action as the MMIO
filtering will happen after the memory barrier effect.
When we detect special defined offset in mmap(), We are mapping
4K page which contains the last of page of doorbell MMIO range
to userspace for same purpose.
For user to query special offset we are adding special flag in
mmap_offset ioctl which needs to be passed as follows,
struct drm_xe_gem_mmap_offset mmo = {
.handle = 0, /* this must be 0 */
.flags = DRM_XE_MMAP_OFFSET_FLAG_PCI_BARRIER,
};
igt_ioctl(fd, DRM_IOCTL_XE_GEM_MMAP_OFFSET, &mmo);
map = mmap(NULL, size, PROT_WRITE, MAP_SHARED, fd, mmo);
IGT : b2dbc6f228
UMD : https://github.com/intel/compute-runtime/pull/772
V7:
- Dgpu filter added
V6(MAuld)
- Move physical mmap to fault handler
- Modify kernel-doc and attach UMD PR when ready
V5(MAuld)
- Return invalid early in case of non 4K PAGE_SIZE
- Format kernel-doc and add note for 4K PAGE_SIZE HW limit
V4(MAuld)
- Add kernel-doc for uapi change
- Restrict page size to 4K
V3(MAuld)
- Remove offset defination from UAPI to be able to change later
- Edit commit message for special flag addition
V2(MAuld)
- Add fault handler with dummy page to handle unplug device
- Add Build check for special offset to be below normal start page
- Test d3hot, mapping seems to be valid in d3hot as well
- Add more info to commit message
Cc: Matthew Auld <matthew.auld@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113114201.3178806-1-tejas.upadhyay@intel.com
The hds-thresh option configures the threshold value of
the header-data-split.
If a received packet size is larger than this threshold value, a packet
will be split into header and payload.
The header indicates TCP and UDP header, but it depends on driver spec.
The bnxt_en driver supports HDS(Header-Data-Split) configuration at
FW level, affecting TCP and UDP too.
So, If hds-thresh is set, it affects UDP and TCP packets.
Example:
# ethtool -G <interface name> hds-thresh <value>
# ethtool -G enp14s0f0np0 tcp-data-split on hds-thresh 256
# ethtool -g enp14s0f0np0
Ring parameters for enp14s0f0np0:
Pre-set maximums:
...
HDS thresh: 1023
Current hardware settings:
...
TCP data split: on
HDS thresh: 256
The default/min/max values are not defined in the ethtool so the drivers
should define themself.
The 0 value means that all TCP/UDP packets' header and payload
will be split.
Tested-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250114142852.3364986-3-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
LoongArch KVM changes for v6.14
1. Clear LLBCTL if secondary mmu mapping changed.
2. Add hypercall service support for usermode VMM.
This is a really small changeset, because the Chinese New Year
(Spring Festival) is coming. Happy New Year!
The F11 key on the new Lenovo Thinkpad T14 Gen 5, T16 Gen 3, and P14s
Gen 5 laptops includes a symbol showing a smartphone and a laptop
chained together. According to the user manual, it starts the Microsoft
Phone Link software used to connect to Android/iOS devices and relay
messages/calls or sync data.
As there are no suitable keycodes for this action, introduce a new one.
Signed-off-by: Illia Ostapyshyn <illia@yshyn.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20241114173930.44983-2-illia@yshyn.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
eetlp_prefix_path in the struct pci_dev tells if End-End TLP Prefixes
are supported by the path or not, and the value is only calculated if
CONFIG_PCI_PASID is set.
The Max End-End TLP Prefixes field in the Device Capabilities Register 2
also tells how many (1-4) End-End TLP Prefixes are supported (PCIe r6.2 sec
7.5.3.15). The number of supported End-End Prefixes is useful for reading
correct number of DWORDs from TLP Prefix Log register in AER capability
(PCIe r6.2 sec 7.8.4.12).
Replace eetlp_prefix_path with eetlp_prefix_max and determine the number of
supported End-End Prefixes regardless of CONFIG_PCI_PASID so that an
upcoming commit generalizing TLP Prefix Log register reading does not have
to read extra DWORDs for End-End Prefixes that never will be there.
The value stored into eetlp_prefix_max is directly derived from device's
Max End-End TLP Prefixes and does not consider limitations imposed by
bridges or the Root Port beyond supported/not supported flags. This is
intentional for two reasons:
1) PCIe r6.2 spec sections 2.2.10.4 & 6.2.4.4 indicate that a TLP is
malformed only if the number of prefixes exceed the number of Max
End-End TLP Prefixes, which seems to be the case even if the device
could never receive that many prefixes due to smaller maximum imposed
by a bridge or the Root Port. If TLP parsing is later added, this
distinction is significant in interpreting what is logged by the TLP
Prefix Log registers and the value matching to the Malformed TLP
threshold is going to be more useful.
2) TLP Prefix handling happens autonomously on a low layer and the value
in eetlp_prefix_max is not programmed anywhere by the kernel (i.e.,
there is no limiter OS can control to prevent sending more than N TLP
Prefixes).
Link: https://lore.kernel.org/r/20250114170840.1633-7-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
In the original change, rawmidi_info.tied_device showed -1 for the
unknown or untied device. But this would require the user-space to
check the protocol version and judge the value conditionally, which
is rather error-prone.
Instead, set the tied_device = 0 to be default as unknown, and
indicate the real device with the offset 1, for achieving more
backward compatibility.
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20250114104711.19197-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains a small batch of Netfilter/IPVS updates
for net-next:
1) Remove unused genmask parameter in nf_tables_addchain()
2) Speed up reads from /proc/net/ip_vs_conn, from Florian Westphal.
3) Skip empty buckets in hashlimit to avoid atomic operations that results
in false positive reports by syzbot with lockdep enabled, patch from
Eric Dumazet.
4) Add conntrack event timestamps available via ctnetlink,
from Florian Westphal.
netfilter pull request 25-01-11
* tag 'nf-next-25-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: conntrack: add conntrack event timestamp
netfilter: xt_hashlimit: htable_selective_cleanup() optimization
ipvs: speed up reads from ip_vs_conn proc file
netfilter: nf_tables: remove the genmask parameter
====================
Link: https://patch.msgid.link/20250111230800.67349-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce a new way to report PHY statistics in a structured and
standardized format using the netlink API. This new method does not
replace the old driver-specific stats, which can still be accessed with
`ethtool -S <eth name>`. The structured stats are available with
`ethtool -S <eth name> --all-groups`.
This new method makes it easier to diagnose problems by organizing stats
in a consistent and documented way.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
THe md-linear is removed by commit 849d18e27b ("md: Remove deprecated
CONFIG_MD_LINEAR") because it has been marked as deprecated for a long
time.
However, md-linear is used widely for underlying disks with different size,
sadly we didn't know this until now, and it's true useful to create
partitions and assemble multiple raid and then append one to the other.
People have to use dm-linear in this case now, however, they will prefer
to minimize the number of involved modules.
Fixes: 849d18e27b ("md: Remove deprecated CONFIG_MD_LINEAR")
Cc: stable@vger.kernel.org
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Coly Li <colyli@kernel.org>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20250102112841.1227111-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
We need the IIO fixes in here as well, and it resolves a merge conflict
in:
drivers/iio/adc/ti-ads1119.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delay accounting can now calculate the average delay of processes, detect
the overall system load, and also record the 'delay max' to identify
potential abnormal delays. However, 'delay min' can help us identify
another useful delay peak. By comparing the difference between 'delay
max' and 'delay min', we can understand the optimization space for
latency, providing a reference for the optimization of latency
performance.
Use case
=========
bash-4.4# ./getdelays -d -t 242
print delayacct stats ON
TGID 242
CPU count real total virtual total delay total delay average delay max delay min
39 156000000 156576579 2111069 0.054ms 0.212296ms 0.031307ms
IO count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
SWAP count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
RECLAIM count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
THRASHING count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
COMPACT count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
WPCOPY count delay total delay average delay max delay min
156 11215873 0.072ms 0.207403ms 0.033913ms
IRQ count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
Link: https://lkml.kernel.org/r/20241220173105906EOdsPhzjMLYNJJBqgz1ga@zte.com.cn
Co-developed-by: Wang Yong <wang.yong12@zte.com.cn>
Signed-off-by: Wang Yong <wang.yong12@zte.com.cn>
Co-developed-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Co-developed-by: Kun Jiang <jiang.kun2@zte.com.cn>
Signed-off-by: Kun Jiang <jiang.kun2@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Fan Yu <fan.yu9@zte.com.cn>
Cc: Peilin He <he.peilin@zte.com.cn>
Cc: tuqiang <tu.qiang35@zte.com.cn>
Cc: ye xingchen <ye.xingchen@zte.com.cn>
Cc: Yunkai Zhang <zhang.yunkai@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Introduce the use cases of delay max, which can help quickly detect
potential abnormal delays in the system and record the types and specific
details of delay spikes.
Problem
========
Delay accounting can track the average delay of processes to show
system workload. However, when a process experiences a significant
delay, maybe a delay spike, which adversely affects performance,
getdelays can only display the average system delay over a period
of time. Yet, average delay is unhelpful for diagnosing delay peak.
It is not even possible to determine which type of delay has spiked,
as this information might be masked by the average delay.
Solution
=========
the 'delay max' can display delay peak since the system's startup,
which can record potential abnormal delays over time, including
the type of delay and the maximum delay. This is helpful for
quickly identifying crash caused by delay.
Use case
=========
bash# ./getdelays -d -p 244
print delayacct stats ON
PID 244
CPU count real total virtual total delay total delay average delay max
68 192000000 213676651 705643 0.010ms 0.306381ms
IO count delay total delay average delay max
0 0 0.000ms 0.000000ms
SWAP count delay total delay average delay max
0 0 0.000ms 0.000000ms
RECLAIM count delay total delay average delay max
0 0 0.000ms 0.000000ms
THRASHING count delay total delay average delay max
0 0 0.000ms 0.000000ms
COMPACT count delay total delay average delay max
0 0 0.000ms 0.000000ms
WPCOPY count delay total delay average delay max
235 15648284 0.067ms 0.263842ms
IRQ count delay total delay average delay max
0 0 0.000ms 0.000000ms
[wang.yaxin@zte.com.cn: update docs and fix some spelling errors]
Link: https://lkml.kernel.org/r/20241213192700771XKZ8H30OtHSeziGqRVMs0@zte.com.cn
Link: https://lkml.kernel.org/r/20241203164848805CS62CQPQWG9GLdQj2_BxS@zte.com.cn
Co-developed-by: Wang Yong <wang.yong12@zte.com.cn>
Signed-off-by: Wang Yong <wang.yong12@zte.com.cn>
Co-developed-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Co-developed-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Signed-off-by: Kun Jiang <jiang.kun2@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Fan Yu <fan.yu9@zte.com.cn>
Cc: Peilin He <he.peilin@zte.com.cn>
Cc: tuqiang <tu.qiang35@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: ye xingchen <ye.xingchen@zte.com.cn>
Cc: Yunkai Zhang <zhang.yunkai@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Updates for v6.14
MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
MDP4:
- several small fixes
DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane)
- fixed modes filtering for platforms w/o 3DMux
- fixed DSPP DSPP_2 / _3 links on several platforms
- corrected DSPP definitions on SDM670
- added CWB hardware blocks support
- added VBIF to DPU snapshots
- dropped struct dpu_rm_requirements
DP:
- reworked DP audio support
DSI:
- added SM6150 (aka QCS615) support
GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsutUu4ff6OpXNXxqf1xaV0rV6oV23VXNRiF0_OEfe72Q@mail.gmail.com
So far we notify the sequencer client and port changes upon UMP FB
changes, but those aren't really corresponding to the UMP updates.
e.g. when a FB info gets updated, it's not notified but done only when
some of sequencer port attribute is changed. This is no ideal
behavior.
This patch adds the two new sequencer event types for notifying the
UMP EP and FB changes via the announce port. The new event takes
snd_seq_ev_ump_notify type data, which is compatible with
snd_seq_addr (where the port number is replaced with the block
number).
The events are sent when the EP and FB info gets updated explicitly
via ioctl, or the backend UMP receives the corresponding UMP
messages.
The sequencer protocol version is bumped to 1.0.5 along with it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-9-tiwai@suse.de
The UMP legacy rawmidi may turn on/off the substream dynamically
depending on the UMP Function Block information. So far, there was no
direct way to know whether the substream is disabled (inactive) or
not; at most one can take a look at the substream name string or try
to open and get -ENODEV.
This patch extends the rawmidi info ioctl to show the current inactive
state of the given substream. When the selected substream is
inactive, info flags field contains the new bit flag
SNDRV_RAWMIDI_INFO_STREAM_INACTIVE.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-3-tiwai@suse.de
The UMP legacy rawmidi is derived from the UMP rawmidi, but currently
there is no way to know which device is involved in other side.
This patch extends the rawmidi info ioctl to show the tied device
number. As default it stores -1, indicating that no tied device.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-2-tiwai@suse.de
Steffen Klassert says:
====================
ipsec-next-2025-01-09
1) Implement the AGGFRAG protocol and basic IP-TFS (RFC9347) functionality.
From Christian Hopps.
2) Support ESN context update to hardware for TX.
From Jianbo Liu.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a separate dio read align field, as many out of place write
file systems can easily do reads aligned to the device sector size,
but require bigger alignment for writes.
This is usually papered over by falling back to buffered I/O for smaller
writes and doing read-modify-write cycles, but performance for this
sucks, so applications benefit from knowing the actual write alignment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250109083109.1441561-3-hch@lst.de
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Nadia Pinaeva writes:
I am working on a tool that allows collecting network performance
metrics by using conntrack events.
Start time of a conntrack entry is used to evaluate seen_reply
latency, therefore the sooner it is timestamped, the better the
precision is.
In particular, when using this tool to compare the performance of the
same feature implemented using iptables/nftables/OVS it is crucial
to have the entry timestamped earlier to see any difference.
At this time, conntrack events can only get timestamped at recv time in
userspace, so there can be some delay between the event being generated
and the userspace process consuming the message.
There is sys/net/netfilter/nf_conntrack_timestamp, which adds a
64bit timestamp (ns resolution) that records start and stop times,
but its not suited for this either, start time is the 'hashtable insertion
time', not 'conntrack allocation time'.
There is concern that moving the start-time moment to conntrack
allocation will add overhead in case of flooding, where conntrack
entries are allocated and released right away without getting inserted
into the hashtable.
Also, even if this was changed it would not with events other than
new (start time) and destroy (stop time).
Pablo suggested to add new CTA_TIMESTAMP_EVENT, this adds this feature.
The timestamp is recorded in case both events are requested and the
sys/net/netfilter/nf_conntrack_timestamp toggle is enabled.
Reported-by: Nadia Pinaeva <n.m.pinaeva@gmail.com>
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This change introduces a mechanism for notifying userspace
applications about changes to IPv6 anycast addresses via netlink. It
includes:
* Addition and deletion of IPv6 anycast addresses are reported using
RTM_NEWANYCAST and RTM_DELANYCAST.
* A new netlink group (RTNLGRP_IPV6_ACADDR) for subscribing to these
notifications.
This enables user space applications(e.g. ip monitor) to efficiently
track anycast addresses through netlink messages, improving metrics
collection and system monitoring. It also unlocks the potential for
advanced anycast management in user space, such as hardware offload
control and fine grained network control.
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250107114355.1766086-1-yuyanghuang@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
NT waits can optionally be made "alertable". This is a special channel for
thread wakeup that is mildly similar to SIGIO. A thread has an internal single
bit of "alerted" state, and if a thread is alerted while an alertable wait, the
wait will return a special value, consume the "alerted" state, and will not
consume any of its objects.
Alerts are implemented using events; the user-space NT emulator is expected to
create an internal ntsync event for each thread and pass that event to wait
functions.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241213193511.457338-16-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
