mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-06-12 12:30:22 -04:00
b4eec5cdf112e3a4e286fb79fe507b09e2fca66f
34385 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
e8ab83e34b |
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas: "Add missing sentinels to the arm64 Spectre-BHB MIDR arrays, otherwise is_midr_in_range_list() reads beyond the end of these arrays" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays |
||
|
Will Deacon
|
fee4d17145 |
arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays
Commit |
||
|
Paolo Bonzini
|
2d7124941a |
Merge tag 'kvmarm-fixes-6.15-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.15, round #2 - Single fix for broken usage of 'multi-MIDR' infrastructure in PI code, adding an open-coded erratum check for everyone's favorite pile of sand: Cavium ThunderX |
||
|
Paolo Bonzini
|
5f9e169814 |
KVM: arm64, x86: make kvm_arch_has_irq_bypass() inline
kvm_arch_has_irq_bypass() is a small function and even though it does not appear in any *really* hot paths, it's also not entirely rare. Make it inline---it also works out nicely in preparation for using it in kvm-intel.ko and kvm-amd.ko, since the function is not currently exported. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Marc Zyngier
|
117c3b21d3 |
arm64: Rework checks for broken Cavium HW in the PI code
Calling into the MIDR checking framework from the PI code has recently
become much harder, due to the new fancy "multi-MIDR" support that
relies on tables being populated at boot time, but not that early that
they are available to the PI code. There are additional issues with
this framework, as the code really isn't position independend *at all*.
This leads to some ugly breakages, as reported by Ada.
It so appears that the only reason for the PI code to call into the
MIDR checking code is to cope with The Most Broken ARM64 System Ever,
aka Cavium ThunderX, which cannot deal with nG attributes that result
of the combination of KASLR and KPTI as a consequence of Erratum 27456.
Duplicate the check for the erratum in the PI code, removing the
dependency on the bulk of the MIDR checking framework. This allows
dropping that same check from kaslr_requires_kpti(), as the KPTI code
already relies on the ARM64_WORKAROUND_CAVIUM_27456 cap.
Fixes:
|
||
|
Linus Torvalds
|
b676ac484f |
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Followup fixes for resilient spinlock (Kumar Kartikeya Dwivedi):
- Make res_spin_lock test less verbose, since it was spamming BPF
CI on failure, and make the check for AA deadlock stronger
- Fix rebasing mistake and use architecture provided
res_smp_cond_load_acquire
- Convert BPF maps (queue_stack and ringbuf) to resilient spinlock
to address long standing syzbot reports
- Make sure that classic BPF load instruction from SKF_[NET|LL]_OFF
offsets works when skb is fragmeneted (Willem de Bruijn)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Convert ringbuf map to rqspinlock
bpf: Convert queue_stack map to rqspinlock
bpf: Use architecture provided res_smp_cond_load_acquire
selftests/bpf: Make res_spin_lock AA test condition stronger
selftests/net: test sk_filter support for SKF_NET_OFF on frags
bpf: support SKF_NET_OFF and SKF_LL_OFF on skb frags
selftests/bpf: Make res_spin_lock test less verbose
|
||
|
Kumar Kartikeya Dwivedi
|
92b90f780d |
bpf: Use architecture provided res_smp_cond_load_acquire
In v2 of rqspinlock [0], we fixed potential problems with WFE usage in arm64 to fallback to a version copied from Ankur's series [1]. This logic was moved into arch-specific headers in v3 [2]. However, we missed using the arch-provided res_smp_cond_load_acquire in commit |
||
|
Linus Torvalds
|
0e8863244e |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA
- Use acquire/release semantics in the KVM FF-A proxy to avoid
reading a stale value for the FF-A version
- Fix KVM guest driver to match PV CPUID hypercall ABI
- Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work
s390:
- Don't use %pK for debug printing and tracepoints
x86:
- Use a separate subclass when acquiring KVM's per-CPU posted
interrupts wakeup lock in the scheduled out path, i.e. when adding
a vCPU on the list of vCPUs to wake, to workaround a false positive
deadlock. The schedule out code runs with a scheduler lock that the
wakeup handler takes in the opposite order; but it does so with
IRQs disabled and cannot run concurrently with a wakeup
- Explicitly zero-initialize on-stack CPUID unions
- Allow building irqbypass.ko as as module when kvm.ko is a module
- Wrap relatively expensive sanity check with KVM_PROVE_MMU
- Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
selftests:
- Add more scenarios to the MONITOR/MWAIT test
- Add option to rseq test to override /dev/cpu_dma_latency
- Bring list of exit reasons up to date
- Cleanup Makefile to list once tests that are valid on all
architectures
Other:
- Documentation fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
KVM: arm64: Use acquire/release to communicate FF-A version negotiation
KVM: arm64: selftests: Explicitly set the page attrs to Inner-Shareable
KVM: arm64: selftests: Introduce and use hardware-definition macros
KVM: VMX: Use separate subclasses for PI wakeup lock to squash false positive
KVM: VMX: Assert that IRQs are disabled when putting vCPU on PI wakeup list
KVM: x86: Explicitly zero-initialize on-stack CPUID unions
KVM: Allow building irqbypass.ko as as module when kvm.ko is a module
KVM: x86/mmu: Wrap sanity check on number of TDP MMU pages with KVM_PROVE_MMU
KVM: selftests: Add option to rseq test to override /dev/cpu_dma_latency
KVM: x86: Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
Documentation: kvm: remove KVM_CAP_MIPS_TE
Documentation: kvm: organize capabilities in the right section
Documentation: kvm: fix some definition lists
Documentation: kvm: drop "Capability" heading from capabilities
Documentation: kvm: give correct name for KVM_CAP_SPAPR_MULTITCE
Documentation: KVM: KVM_GET_SUPPORTED_CPUID now exposes TSC_DEADLINE
selftests: kvm: list once tests that are valid on all architectures
selftests: kvm: bring list of exit reasons up to date
selftests: kvm: revamp MONITOR/MWAIT tests
KVM: arm64: Don't translate FAR if invalid/unsafe
...
|
||
|
Paolo Bonzini
|
c478032df0 |
Merge tag 'kvmarm-fixes-6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64: First batch of fixes for 6.15 - Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk stage-1 page tables) to align with the architecture. This avoids possibly taking an SEA at EL2 on the page table walk or using an architecturally UNKNOWN fault IPA. - Use acquire/release semantics in the KVM FF-A proxy to avoid reading a stale value for the FF-A version. - Fix KVM guest driver to match PV CPUID hypercall ABI. - Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM selftests, which is the only memory type for which atomic instructions are architecturally guaranteed to work. |
||
|
Will Deacon
|
a344e258ac |
KVM: arm64: Use acquire/release to communicate FF-A version negotiation
The pKVM FF-A proxy rejects FF-A requests other than FFA_VERSION until
version negotiation is complete, which is signalled by setting the
global 'has_version_negotiated' variable.
To avoid excessive locking, this variable is checked directly from
kvm_host_ffa_handler() in response to an FF-A call, but this can race
against another CPU performing the negotiation and potentially lead to
reading a torn value (incredibly unlikely for a 'bool') or problematic
re-ordering of the accesses to 'has_version_negotiated' and
'hyp_ffa_version' whereby a stale version number could be read by
__do_ffa_mem_xfer().
Use acquire/release primitives when writing 'has_version_negotiated'
with the version lock held and when reading without the lock held.
Cc: Sebastian Ene <sebastianene@google.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Quentin Perret <qperret@google.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Marc Zyngier <maz@kernel.org>
Fixes:
|
||
|
Linus Torvalds
|
f4d2ef4825 |
Merge tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada: - Improve performance in gendwarfksyms - Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS - Support CONFIG_HEADERS_INSTALL for ARCH=um - Use more relative paths to sources files for better reproducibility - Support the loong64 Debian architecture - Add Kbuild bash completion - Introduce intermediate vmlinux.unstripped for architectures that need static relocations to be stripped from the final vmlinux - Fix versioning in Debian packages for -rc releases - Treat missing MODULE_DESCRIPTION() as an error - Convert Nios2 Makefiles to use the generic rule for built-in DTB - Add debuginfo support to the RPM package * tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits) kbuild: rpm-pkg: build a debuginfo RPM kconfig: merge_config: use an empty file as initfile nios2: migrate to the generic rule for built-in DTB rust: kbuild: skip `--remap-path-prefix` for `rustdoc` kbuild: pacman-pkg: hardcode module installation path kbuild: deb-pkg: don't set KBUILD_BUILD_VERSION unconditionally modpost: require a MODULE_DESCRIPTION() kbuild: make all file references relative to source root x86: drop unnecessary prefix map configuration kbuild: deb-pkg: add comment about future removal of KDEB_COMPRESS kbuild: Add a help message for "headers" kbuild: deb-pkg: remove "version" variable in mkdebian kbuild: deb-pkg: fix versioning for -rc releases Documentation/kbuild: Fix indentation in modules.rst example x86: Get rid of Makefile.postlink kbuild: Create intermediate vmlinux build with relocations preserved kbuild: Introduce Kconfig symbol for linking vmlinux with relocations kbuild: link-vmlinux.sh: Make output file name configurable kbuild: do not generate .tmp_vmlinux*.map when CONFIG_VMLINUX_MAP=y Revert "kheaders: Ignore silly-rename files" ... |
||
|
Linus Torvalds
|
aa18761a44 |
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas: - Fix max_pfn calculation when hotplugging memory so that it never decreases - Fix dereference of unused source register in the MOPS SET operation fault handling - Fix NULL calling in do_compat_alignment_fixup() when the 32-bit user space does an unaligned LDREX/STREX - Add the HiSilicon HIP09 processor to the Spectre-BHB affected CPUs - Drop unused code pud accessors (special/mkspecial) * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Don't call NULL in do_compat_alignment_fixup() arm64: Add support for HIP09 Spectre-BHB mitigation arm64: mm: Drop dead code for pud special bit handling arm64: mops: Do not dereference src reg for a set operation arm64: mm: Correct the update of max_pfn |
||
|
Oliver Upton
|
26fbdf3692 |
KVM: arm64: Don't translate FAR if invalid/unsafe
Don't re-walk the page tables if an SEA occurred during the faulting page table walk to avoid taking a fatal exception in the hyp. Additionally, check that FAR_EL2 is valid for SEAs not taken on PTW as the architecture doesn't guarantee it contains the fault VA. Finally, fix up the rest of the abort path by checking for SEAs early and bugging the VM if we get further along with an UNKNOWN fault IPA. Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20250402201725.2963645-4-oliver.upton@linux.dev Signed-off-by: Oliver Upton <oliver.upton@linux.dev> |
||
|
Oliver Upton
|
1cf3e126f1 |
arm64: Convert HPFAR_EL2 to sysreg table
Switch over to the typical sysreg table for HPFAR_EL2 as we're about to start using more fields in the register. Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20250402201725.2963645-3-oliver.upton@linux.dev Signed-off-by: Oliver Upton <oliver.upton@linux.dev> |
||
|
Oliver Upton
|
fb8a3eba9c |
KVM: arm64: Only read HPFAR_EL2 when value is architecturally valid
KVM's logic for deciding when HPFAR_EL2 is UNKNOWN doesn't align with the architecture. Most notably, KVM assumes HPFAR_EL2 contains the faulting IPA even in the case of an SEA. Align the logic with the architecture rather than attempting to paraphrase it. Additionally, take the opportunity to improve the language around ARM erratum #834220 such that it actually describes the bug. Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20250402201725.2963645-2-oliver.upton@linux.dev Signed-off-by: Oliver Upton <oliver.upton@linux.dev> |
||
|
Jeff Xu
|
0061b6e162 |
mseal sysmap: enable arm64
Provide support for CONFIG_MSEAL_SYSTEM_MAPPINGS on arm64, covering the vdso, vvar, and compat-mode vectors and sigpage mappings. Production release testing passes on Android and Chrome OS. Link: https://lkml.kernel.org/r/20250305021711.3867874-5-jeffxu@google.com Signed-off-by: Jeff Xu <jeffxu@chromium.org> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reviewed-by: Kees Cook <kees@kernel.org> Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org> Cc: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrei Vagin <avagin@gmail.com> Cc: Anna-Maria Behnsen <anna-maria@linutronix.de> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Benjamin Berg <benjamin@sipsolutions.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Elliot Hughes <enh@google.com> Cc: Florian Faineli <f.fainelli@gmail.com> Cc: Greg Ungerer <gerg@kernel.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Jason A. Donenfeld <jason@zx2c4.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jorge Lucangeli Obes <jorgelo@chromium.org> Cc: Linus Waleij <linus.walleij@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Mike Rapoport <mike.rapoport@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Falcato <pedro.falcato@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Stephen Röttger <sroettger@google.com> Cc: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Linus Torvalds
|
d6b02199cd |
Merge tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton: - The series "powerpc/crash: use generic crashkernel reservation" from Sourabh Jain changes powerpc's kexec code to use more of the generic layers. - The series "get_maintainer: report subsystem status separately" from Vlastimil Babka makes some long-requested improvements to the get_maintainer output. - The series "ucount: Simplify refcounting with rcuref_t" from Sebastian Siewior cleans up and optimizing the refcounting in the ucount code. - The series "reboot: support runtime configuration of emergency hw_protection action" from Ahmad Fatoum improves the ability for a driver to perform an emergency system shutdown or reboot. - The series "Converge on using secs_to_jiffies() part two" from Easwar Hariharan performs further migrations from msecs_to_jiffies() to secs_to_jiffies(). - The series "lib/interval_tree: add some test cases and cleanup" from Wei Yang permits more userspace testing of kernel library code, adds some more tests and performs some cleanups. - The series "hung_task: Dump the blocking task stacktrace" from Masami Hiramatsu arranges for the hung_task detector to dump the stack of the blocking task and not just that of the blocked task. - The series "resource: Split and use DEFINE_RES*() macros" from Andy Shevchenko provides some cleanups to the resource definition macros. - Plus the usual shower of singleton patches - please see the individual changelogs for details. * tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits) mailmap: consolidate email addresses of Alexander Sverdlin fs/procfs: fix the comment above proc_pid_wchan() relay: use kasprintf() instead of fixed buffer formatting resource: replace open coded variant of DEFINE_RES() resource: replace open coded variants of DEFINE_RES_*_NAMED() resource: replace open coded variant of DEFINE_RES_NAMED_DESC() resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED() samples: add hung_task detector mutex blocking sample hung_task: show the blocker task if the task is hung on mutex kexec_core: accept unaccepted kexec segments' destination addresses watchdog/perf: optimize bytes copied and remove manual NUL-termination lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap() lib/interval_tree: skip the check before go to the right subtree lib/interval_tree: add test case for span iteration lib/interval_tree: add test case for interval_tree_iter_xxx() helpers lib/rbtree: add random seed lib/rbtree: split tests lib/rbtree: enable userland test suite for rbtree related data structure checkpatch: describe --min-conf-desc-length scripts/gdb/symbols: determine KASLR offset on s390 ... |
||
|
Linus Torvalds
|
eb0ece1602 |
Merge tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton: - The series "Enable strict percpu address space checks" from Uros Bizjak uses x86 named address space qualifiers to provide compile-time checking of percpu area accesses. This has caused a small amount of fallout - two or three issues were reported. In all cases the calling code was found to be incorrect. - The series "Some cleanup for memcg" from Chen Ridong implements some relatively monir cleanups for the memcontrol code. - The series "mm: fixes for device-exclusive entries (hmm)" from David Hildenbrand fixes a boatload of issues which David found then using device-exclusive PTE entries when THP is enabled. More work is needed, but this makes thins better - our own HMM selftests now succeed. - The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed remove the z3fold and zbud implementations. They have been deprecated for half a year and nobody has complained. - The series "mm: further simplify VMA merge operation" from Lorenzo Stoakes implements numerous simplifications in this area. No runtime effects are anticipated. - The series "mm/madvise: remove redundant mmap_lock operations from process_madvise()" from SeongJae Park rationalizes the locking in the madvise() implementation. Performance gains of 20-25% were observed in one MADV_DONTNEED microbenchmark. - The series "Tiny cleanup and improvements about SWAP code" from Baoquan He contains a number of touchups to issues which Baoquan noticed when working on the swap code. - The series "mm: kmemleak: Usability improvements" from Catalin Marinas implements a couple of improvements to the kmemleak user-visible output. - The series "mm/damon/paddr: fix large folios access and schemes handling" from Usama Arif provides a couple of fixes for DAMON's handling of large folios. - The series "mm/damon/core: fix wrong and/or useless damos_walk() behaviors" from SeongJae Park fixes a few issues with the accuracy of kdamond's walking of DAMON regions. - The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo Stoakes changes the interaction between framebuffer deferred-io and core MM. No functional changes are anticipated - this is preparatory work for the future removal of page structure fields. - The series "mm/damon: add support for hugepage_size DAMOS filter" from Usama Arif adds a DAMOS filter which permits the filtering by huge page sizes. - The series "mm: permit guard regions for file-backed/shmem mappings" from Lorenzo Stoakes extends the guard region feature from its present "anon mappings only" state. The feature now covers shmem and file-backed mappings. - The series "mm: batched unmap lazyfree large folios during reclamation" from Barry Song cleans up and speeds up the unmapping for pte-mapped large folios. - The series "reimplement per-vma lock as a refcount" from Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for pulling it out were largely bogus and that change made the code more messy. This patchset provides small (0-10%) improvements on one microbenchmark. - The series "Docs/mm/damon: misc DAMOS filters documentation fixes and improves" from SeongJae Park does some maintenance work on the DAMON docs. - The series "hugetlb/CMA improvements for large systems" from Frank van der Linden addresses a pile of issues which have been observed when using CMA on large machines. - The series "mm/damon: introduce DAMOS filter type for unmapped pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the page's mapped/unmapped status. - The series "zsmalloc/zram: there be preemption" from Sergey Senozhatsky teaches zram to run its compression and decompression operations preemptibly. - The series "selftests/mm: Some cleanups from trying to run them" from Brendan Jackman fixes a pile of unrelated issues which Brendan encountered while runnimg our selftests. - The series "fs/proc/task_mmu: add guard region bit to pagemap" from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to determine whether a particular page is a guard page. - The series "mm, swap: remove swap slot cache" from Kairui Song removes the swap slot cache from the allocation path - it simply wasn't being effective. - The series "mm: cleanups for device-exclusive entries (hmm)" from David Hildenbrand implements a number of unrelated cleanups in this code. - The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual implements a number of preparatoty cleanups to the GENERIC_PTDUMP Kconfig logic. - The series "mm/damon: auto-tune aggregation interval" from SeongJae Park implements a feedback-driven automatic tuning feature for DAMON's aggregation interval tuning. - The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did this in preparation for implementing lazy mmu mode for arm64 to optimize vmalloc. - The series "mm/page_alloc: Some clarifications for migratetype fallback" from Brendan Jackman reworks some commentary to make the code easier to follow. - The series "page_counter cleanup and size reduction" from Shakeel Butt cleans up the page_counter code and fixes a size increase which we accidentally added late last year. - The series "Add a command line option that enables control of how many threads should be used to allocate huge pages" from Thomas Prescher does that. It allows the careful operator to significantly reduce boot time by tuning the parallalization of huge page initialization. - The series "Fix calculations in trace_balance_dirty_pages() for cgwb" from Tang Yizhou fixes the tracing output from the dirty page balancing code. - The series "mm/damon: make allow filters after reject filters useful and intuitive" from SeongJae Park improves the handling of allow and reject filters. Behaviour is made more consistent and the documention is updated accordingly. - The series "Switch zswap to object read/write APIs" from Yosry Ahmed updates zswap to the new object read/write APIs and thus permits the removal of some legacy code from zpool and zsmalloc. - The series "Some trivial cleanups for shmem" from Baolin Wang does as it claims. - The series "fs/dax: Fix ZONE_DEVICE page reference counts" from Alistair Popple regularizes the weird ZONE_DEVICE page refcount handling in DAX, permittig the removal of a number of special-case checks. - The series "refactor mremap and fix bug" from Lorenzo Stoakes is a preparatoty refactoring and cleanup of the mremap() code. - The series "mm: MM owner tracking for large folios (!hugetlb) + CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in which we determine whether a large folio is known to be mapped exclusively into a single MM. - The series "mm/damon: add sysfs dirs for managing DAMOS filters based on handling layers" from SeongJae Park adds a couple of new sysfs directories to ease the management of DAMON/DAMOS filters. - The series "arch, mm: reduce code duplication in mem_init()" from Mike Rapoport consolidates many per-arch implementations of mem_init() into code generic code, where that is practical. - The series "mm/damon/sysfs: commit parameters online via damon_call()" from SeongJae Park continues the cleaning up of sysfs access to DAMON internal data. - The series "mm: page_ext: Introduce new iteration API" from Luiz Capitulino reworks the page_ext initialization to fix a boot-time crash which was observed with an unusual combination of compile and cmdline options. - The series "Buddy allocator like (or non-uniform) folio split" from Zi Yan reworks the code to split a folio into smaller folios. The main benefit is lessened memory consumption: fewer post-split folios are generated. - The series "Minimize xa_node allocation during xarry split" from Zi Yan reduces the number of xarray xa_nodes which are generated during an xarray split. - The series "drivers/base/memory: Two cleanups" from Gavin Shan performs some maintenance work on the drivers/base/memory code. - The series "Add tracepoints for lowmem reserves, watermarks and totalreserve_pages" from Martin Liu adds some more tracepoints to the page allocator code. - The series "mm/madvise: cleanup requests validations and classifications" from SeongJae Park cleans up some warts which SeongJae observed during his earlier madvise work. - The series "mm/hwpoison: Fix regressions in memory failure handling" from Shuai Xue addresses two quite serious regressions which Shuai has observed in the memory-failure implementation. - The series "mm: reliable huge page allocator" from Johannes Weiner makes huge page allocations cheaper and more reliable by reducing fragmentation. - The series "Minor memcg cleanups & prep for memdescs" from Matthew Wilcox is preparatory work for the future implementation of memdescs. - The series "track memory used by balloon drivers" from Nico Pache introduces a way to track memory used by our various balloon drivers. - The series "mm/damon: introduce DAMOS filter type for active pages" from Nhat Pham permits users to filter for active/inactive pages, separately for file and anon pages. - The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia separates the proactive reclaim statistics from the direct reclaim statistics. - The series "mm/vmscan: don't try to reclaim hwpoison folio" from Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim code. * tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits) mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex() x86/mm: restore early initialization of high_memory for 32-bits mm/vmscan: don't try to reclaim hwpoison folio mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper cgroup: docs: add pswpin and pswpout items in cgroup v2 doc mm: vmscan: split proactive reclaim statistics from direct reclaim statistics selftests/mm: speed up split_huge_page_test selftests/mm: uffd-unit-tests support for hugepages > 2M docs/mm/damon/design: document active DAMOS filter type mm/damon: implement a new DAMOS filter type for active pages fs/dax: don't disassociate zero page entries MM documentation: add "Unaccepted" meminfo entry selftests/mm: add commentary about 9pfs bugs fork: use __vmalloc_node() for stack allocation docs/mm: Physical Memory: Populate the "Zones" section xen: balloon: update the NR_BALLOON_PAGES state hv_balloon: update the NR_BALLOON_PAGES state balloon_compaction: update the NR_BALLOON_PAGES state meminfo: add a per node counter for balloon drivers mm: remove references to folio in __memcg_kmem_uncharge_page() ... |
||
|
Angelos Oikonomopoulos
|
c28f31deea |
arm64: Don't call NULL in do_compat_alignment_fixup()
do_alignment_t32_to_handler() only fixes up alignment faults for
specific instructions; it returns NULL otherwise (e.g. LDREX). When
that's the case, signal to the caller that it needs to proceed with the
regular alignment fault handling (i.e. SIGBUS). Without this patch, the
kernel panics:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000086000006
EC = 0x21: IABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x06: level 2 translation fault
user pgtable: 4k pages, 48-bit VAs, pgdp=00000800164aa000
[0000000000000000] pgd=0800081fdbd22003, p4d=0800081fdbd22003, pud=08000815d51c6003, pmd=0000000000000000
Internal error: Oops: 0000000086000006 [#1] SMP
Modules linked in: cfg80211 rfkill xt_nat xt_tcpudp xt_conntrack nft_chain_nat xt_MASQUERADE nf_nat nf_conntrack_netlink nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xfrm_user xfrm_algo xt_addrtype nft_compat br_netfilter veth nvme_fa>
libcrc32c crc32c_generic raid0 multipath linear dm_mod dax raid1 md_mod xhci_pci nvme xhci_hcd nvme_core t10_pi usbcore igb crc64_rocksoft crc64 crc_t10dif crct10dif_generic crct10dif_ce crct10dif_common usb_common i2c_algo_bit i2c>
CPU: 2 PID: 3932954 Comm: WPEWebProcess Not tainted 6.1.0-31-arm64 #1 Debian 6.1.128-1
Hardware name: GIGABYTE MP32-AR1-00/MP32-AR1-00, BIOS F18v (SCP: 1.08.20211002) 12/01/2021
pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : 0x0
lr : do_compat_alignment_fixup+0xd8/0x3dc
sp : ffff80000f973dd0
x29: ffff80000f973dd0 x28: ffff081b42526180 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
x23: 0000000000000004 x22: 0000000000000000 x21: 0000000000000001
x20: 00000000e8551f00 x19: ffff80000f973eb0 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffaebc949bc488
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000400000 x4 : 0000fffffffffffe x3 : 0000000000000000
x2 : ffff80000f973eb0 x1 : 00000000e8551f00 x0 : 0000000000000001
Call trace:
0x0
do_alignment_fault+0x40/0x50
do_mem_abort+0x4c/0xa0
el0_da+0x48/0xf0
el0t_32_sync_handler+0x110/0x140
el0t_32_sync+0x190/0x194
Code: bad PC value
---[ end trace 0000000000000000 ]---
Signed-off-by: Angelos Oikonomopoulos <angelos@igalia.com>
Fixes:
|
||
|
Linus Torvalds
|
01d5b167dc |
Merge tag 'modules-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules updates from Petr Pavlu: - Use RCU instead of RCU-sched The mix of rcu_read_lock(), rcu_read_lock_sched() and preempt_disable() in the module code and its users has been replaced with just rcu_read_lock() - The rest of changes are smaller fixes and updates * tag 'modules-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux: (32 commits) MAINTAINERS: Update the MODULE SUPPORT section module: Remove unnecessary size argument when calling strscpy() module: Replace deprecated strncpy() with strscpy() params: Annotate struct module_param_attrs with __counted_by() bug: Use RCU instead RCU-sched to protect module_bug_list. static_call: Use RCU in all users of __module_text_address(). kprobes: Use RCU in all users of __module_text_address(). bpf: Use RCU in all users of __module_text_address(). jump_label: Use RCU in all users of __module_text_address(). jump_label: Use RCU in all users of __module_address(). x86: Use RCU in all users of __module_address(). cfi: Use RCU while invoking __module_address(). powerpc/ftrace: Use RCU in all users of __module_text_address(). LoongArch: ftrace: Use RCU in all users of __module_text_address(). LoongArch/orc: Use RCU in all users of __module_address(). arm64: module: Use RCU in all users of __module_text_address(). ARM: module: Use RCU in all users of __module_text_address(). module: Use RCU in all users of __module_text_address(). module: Use RCU in all users of __module_address(). module: Use RCU in search_module_extables(). ... |
||
|
Linus Torvalds
|
494e7fe591 |
Merge tag 'bpf_res_spin_lock' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf relisient spinlock support from Alexei Starovoitov:
"This patch set introduces Resilient Queued Spin Lock (or rqspinlock
with res_spin_lock() and res_spin_unlock() APIs).
This is a qspinlock variant which recovers the kernel from a stalled
state when the lock acquisition path cannot make forward progress.
This can occur when a lock acquisition attempt enters a deadlock
situation (e.g. AA, or ABBA), or more generally, when the owner of the
lock (which we’re trying to acquire) isn’t making forward progress.
Deadlock detection is the main mechanism used to provide instant
recovery, with the timeout mechanism acting as a final line of
defense. Detection is triggered immediately when beginning the waiting
loop of a lock slow path.
Additionally, BPF programs attached to different parts of the kernel
can introduce new control flow into the kernel, which increases the
likelihood of deadlocks in code not written to handle reentrancy.
There have been multiple syzbot reports surfacing deadlocks in
internal kernel code due to the diverse ways in which BPF programs can
be attached to different parts of the kernel. By switching the BPF
subsystem’s lock usage to rqspinlock, all of these issues are
mitigated at runtime.
This spin lock implementation allows BPF maps to become safer and
remove mechanisms that have fallen short in assuring safety when
nesting programs in arbitrary ways in the same context or across
different contexts.
We run benchmarks that stress locking scalability and perform
comparison against the baseline (qspinlock). For the rqspinlock case,
we replace the default qspinlock with it in the kernel, such that all
spin locks in the kernel use the rqspinlock slow path. As such,
benchmarks that stress kernel spin locks end up exercising rqspinlock.
More details in the cover letter in commit
|
||
|
Linus Torvalds
|
fa593d0f96 |
Merge tag 'bpf-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"For this merge window we're splitting BPF pull request into three for
higher visibility: main changes, res_spin_lock, try_alloc_pages.
These are the main BPF changes:
- Add DFA-based live registers analysis to improve verification of
programs with loops (Eduard Zingerman)
- Introduce load_acquire and store_release BPF instructions and add
x86, arm64 JIT support (Peilin Ye)
- Fix loop detection logic in the verifier (Eduard Zingerman)
- Drop unnecesary lock in bpf_map_inc_not_zero() (Eric Dumazet)
- Add kfunc for populating cpumask bits (Emil Tsalapatis)
- Convert various shell based tests to selftests/bpf/test_progs
format (Bastien Curutchet)
- Allow passing referenced kptrs into struct_ops callbacks (Amery
Hung)
- Add a flag to LSM bpf hook to facilitate bpf program signing
(Blaise Boscaccy)
- Track arena arguments in kfuncs (Ihor Solodrai)
- Add copy_remote_vm_str() helper for reading strings from remote VM
and bpf_copy_from_user_task_str() kfunc (Jordan Rome)
- Add support for timed may_goto instruction (Kumar Kartikeya
Dwivedi)
- Allow bpf_get_netns_cookie() int cgroup_skb programs (Mahe Tardy)
- Reduce bpf_cgrp_storage_busy false positives when accessing cgroup
local storage (Martin KaFai Lau)
- Introduce bpf_dynptr_copy() kfunc (Mykyta Yatsenko)
- Allow retrieving BTF data with BTF token (Mykyta Yatsenko)
- Add BPF kfuncs to set and get xattrs with 'security.bpf.' prefix
(Song Liu)
- Reject attaching programs to noreturn functions (Yafang Shao)
- Introduce pre-order traversal of cgroup bpf programs (Yonghong
Song)"
* tag 'bpf-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (186 commits)
selftests/bpf: Add selftests for load-acquire/store-release when register number is invalid
bpf: Fix out-of-bounds read in check_atomic_load/store()
libbpf: Add namespace for errstr making it libbpf_errstr
bpf: Add struct_ops context information to struct bpf_prog_aux
selftests/bpf: Sanitize pointer prior fclose()
selftests/bpf: Migrate test_xdp_vlan.sh into test_progs
selftests/bpf: test_xdp_vlan: Rename BPF sections
bpf: clarify a misleading verifier error message
selftests/bpf: Add selftest for attaching fexit to __noreturn functions
bpf: Reject attaching fexit/fmod_ret to __noreturn functions
bpf: Only fails the busy counter check in bpf_cgrp_storage_get if it creates storage
bpf: Make perf_event_read_output accessible in all program types.
bpftool: Using the right format specifiers
bpftool: Add -Wformat-signedness flag to detect format errors
selftests/bpf: Test freplace from user namespace
libbpf: Pass BPF token from find_prog_btf_id to BPF_BTF_GET_FD_BY_ID
bpf: Return prog btf_id without capable check
bpf: BPF token support for BPF_BTF_GET_FD_BY_ID
bpf, x86: Fix objtool warning for timed may_goto
bpf: Check map->record at the beginning of check_and_free_fields()
...
|
||
|
Linus Torvalds
|
e5e0e6bebe |
Merge tag 'v6.15-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "API: - Remove legacy compression interface - Improve scatterwalk API - Add request chaining to ahash and acomp - Add virtual address support to ahash and acomp - Add folio support to acomp - Remove NULL dst support from acomp Algorithms: - Library options are fuly hidden (selected by kernel users only) - Add Kerberos5 algorithms - Add VAES-based ctr(aes) on x86 - Ensure LZO respects output buffer length on compression - Remove obsolete SIMD fallback code path from arm/ghash-ce Drivers: - Add support for PCI device 0x1134 in ccp - Add support for rk3588's standalone TRNG in rockchip - Add Inside Secure SafeXcel EIP-93 crypto engine support in eip93 - Fix bugs in tegra uncovered by multi-threaded self-test - Fix corner cases in hisilicon/sec2 Others: - Add SG_MITER_LOCAL to sg miter - Convert ubifs, hibernate and xfrm_ipcomp from legacy API to acomp" * tag 'v6.15-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (187 commits) crypto: testmgr - Add multibuffer acomp testing crypto: acomp - Fix synchronous acomp chaining fallback crypto: testmgr - Add multibuffer hash testing crypto: hash - Fix synchronous ahash chaining fallback crypto: arm/ghash-ce - Remove SIMD fallback code path crypto: essiv - Replace memcpy() + NUL-termination with strscpy() crypto: api - Call crypto_alg_put in crypto_unregister_alg crypto: scompress - Fix incorrect stream freeing crypto: lib/chacha - remove unused arch-specific init support crypto: remove obsolete 'comp' compression API crypto: compress_null - drop obsolete 'comp' implementation crypto: cavium/zip - drop obsolete 'comp' implementation crypto: zstd - drop obsolete 'comp' implementation crypto: lzo - drop obsolete 'comp' implementation crypto: lzo-rle - drop obsolete 'comp' implementation crypto: lz4hc - drop obsolete 'comp' implementation crypto: lz4 - drop obsolete 'comp' implementation crypto: deflate - drop obsolete 'comp' implementation crypto: 842 - drop obsolete 'comp' implementation crypto: nx - Migrate to scomp API ... |
||
|
Linus Torvalds
|
f8a4eba343 |
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC fixes from Eric Biggers: "Fix out-of-scope array bugs in arm and arm64's crc_t10dif_arch()" * tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: arm64/crc-t10dif: fix use of out-of-scope array in crc_t10dif_arch() arm/crc-t10dif: fix use of out-of-scope array in crc_t10dif_arch() |
||
|
Jinqian Yang
|
e18c09b204 |
arm64: Add support for HIP09 Spectre-BHB mitigation
The HIP09 processor is vulnerable to the Spectre-BHB (Branch History Buffer) attack, which can be exploited to leak information through branch prediction side channels. This commit adds the MIDR of HIP09 to the list for software mitigation. Signed-off-by: Jinqian Yang <yangjinqian1@huawei.com> Link: https://lore.kernel.org/r/20250325141900.2057314-1-yangjinqian1@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Peter Xu
|
0fff2aa96f |
arm64: mm: Drop dead code for pud special bit handling
Keith Busch observed some incorrect macros defined in arm64 code [1].
It turns out the two lines should never be needed and won't be exposed to
anyone, because aarch64 doesn't select HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD,
hence ARCH_SUPPORTS_PUD_PFNMAP is always N. The only archs that support
THP PUDs so far are x86 and powerpc.
Instead of fixing the lines (with no way to test it..), remove the two
lines that are in reality dead code, to avoid confusing readers.
Fixes tag is attached to reflect where the wrong macros were introduced,
but explicitly not copying stable, because there's no real issue to be
fixed. So it's only about removing the dead code so far.
[1] https://lore.kernel.org/all/Z9tDjOk-JdV_fCY4@kbusch-mbp.dhcp.thefacebook.com/#t
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Donald Dutile <ddutile@redhat.com>
Cc: Will Deacon <will@kernel.org>
Fixes:
|
||
|
Keir Fraser
|
a13bfa4fe0 |
arm64: mops: Do not dereference src reg for a set operation
The source register is not used for SET* and reading it can result in a UBSAN out-of-bounds array access error, specifically when the MOPS exception is taken from a SET* sequence with XZR (reg 31) as the source. Architecturally this is the only case where a src/dst/size field in the ESR can be reported as 31. Prior to |
||
|
Zhenhua Huang
|
89f43e1ce6 |
arm64: mm: Correct the update of max_pfn
Hotplugged memory can be smaller than the original memory. For example,
on my target:
root@genericarmv8:~# cat /sys/kernel/debug/memblock/memory
0: 0x0000000064005000..0x0000000064023fff 0 NOMAP
1: 0x0000000064400000..0x00000000647fffff 0 NOMAP
2: 0x0000000068000000..0x000000006fffffff 0 DRV_MNG
3: 0x0000000088800000..0x0000000094ffefff 0 NONE
4: 0x0000000094fff000..0x0000000094ffffff 0 NOMAP
max_pfn will affect read_page_owner. Therefore, it should first compare and
then select the larger value for max_pfn.
Fixes:
|
||
|
Linus Torvalds
|
dd161f74f8 |
Merge tag 'trace-sorttable-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing / sorttable updates from Steven Rostedt: - Implement arm64 build time sorting of the mcount location table When gcc is used to build arm64, the mcount_loc section is all zeros in the vmlinux elf file. The addresses are stored in the Elf_Rela location. To sort at build time, an array is allocated and the addresses are added to it via the content of the mcount_loc section as well as he Elf_Rela data. After sorting, the information is put back into the Elf_Rela which now has the section sorted. - Make sorting of mcount location table for arm64 work with clang as well When clang is used, the mcount_loc section contains the addresses, unlike the gcc build. An array is still created and the sorting works for both methods. - Remove weak functions from the mcount_loc section Have the sorttable code pass in the data of functions defined via 'nm -S' which shows the functions as well as their sizes. Using this information the sorttable code can determine if a function in the mcount_loc section was weak and overridden. If the function is not found, it is set to be zero. On boot, when the mcount_loc section is read and the ftrace table is created, if the address in the mcount_loc is not in the kernel core text then it is removed and not added to the ftrace_filter_functions (the functions that can be attached by ftrace callbacks). - Update and fix the reporting of how much data is used for ftrace functions On boot, a report of how many pages were used by the ftrace table as well as how they were grouped (the table holds a list of sections that are groups of pages that were able to be allocated). The removing of the weak functions required the accounting to be updated. * tag 'trace-sorttable-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: scripts/sorttable: Allow matches to functions before function entry scripts/sorttable: Use normal sort if theres no relocs in the mcount section ftrace: Check against is_kernel_text() instead of kaslr_offset() ftrace: Test mcount_loc addr before calling ftrace_call_addr() ftrace: Have ftrace pages output reflect freed pages ftrace: Update the mcount_loc check of skipped entries scripts/sorttable: Zero out weak functions in mcount_loc table scripts/sorttable: Always use an array for the mcount_loc sorting scripts/sorttable: Have mcount rela sort use direct values arm64: scripts/sorttable: Implement sorting mcount_loc at boot for arm64 |
||
|
Linus Torvalds
|
3bb3396d77 |
Merge tag 'soc-defconfig-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann: "A small set of updates for the arm64 defconfig to enable more drivers, plus a bit for housekeeping on some of the arm32 defconfigs on particular SoC families" * tag 'soc-defconfig-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm: defconfig: drop RT_GROUP_SCHED=y from bcm2835/tegra/omap2plus arm64: defconfig: Enable USB retimer and redriver arm64: defconfig: Build NSS Clock Controller driver for IPQ9574 arm64: defconfig: Enable SPI NAND flashes arm64: defconfig: Enable Synopsys HDMI receiver arm64: defconfig: Enable Rockchip UFS host driver arm64: defconfig: enable Qualcomm IRIS & VIDEOCC_8550 as module arm64: defconfig: Enable HSR protocol driver arm64: defconfig: Enable gb_beagleplay arm64: defconfig: enable DRM_DISPLAY_CONNECTOR as a module arm64: defconfig: Enable Qualcomm QCM2290 GPU clock controller ARM: shmobile: defconfig: Supplement DTB with ATAG information |
||
|
Linus Torvalds
|
2f24482304 |
Merge tag 'soc-dt-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"There is new support for additional on-chip devices on Apple,
Mediatek, Renesas, Rockchip, Samsung, Google, TI, ST, Nvidia and
Amlogic devices.
The Arm Morello reference platform gets a devicetree for booting in
normal aarch64 mode. The hardware supports experimental CHERI support,
which requires a modified kernel.
The AMD (formerly Xilinx) Versal NET SoC gets added, this is a
combined FPGA with Cortex-A78 CPUs in a SoC.
Six new ST STM32MP2 SoC variants are added. Like the earlier
STM32MP25, the MP211, MP213, MP215, MP231, MP233 and MP235 models are
based on one or two Cortex-A35 cores but each feature a different set
of I/O devices.
Mediatek MT8370 is a minor variation of MT8390 with fewer CPU and GPU
cores
Apple T2 is the baseboard management controller on earlier Intel CPU
based Macs, with 16 models now gaining initial support.
All the above come with dts files for the reference boards. In
addition, these boards are added for the SoCs that are already
supported:
- The Milk-V Jupiter board based on SpacemiT K1/M1
- NetCube Systems Kumquat board based on the 32-bit Allwinner V3s SoC
- Three boards based on 32-bit stm32mp1
- 11 distinct board variants from Toradex and one from Variscite, all
based on i.MX6
- Google Pixel Pro 6 phone based on gs101 (Tensor)
- Three additional variants of the i.MX8MP based "Skov" board
- A second variant of the i.MX95 EVK board
- Two boards based on Renesas SoCs
- Four boards based the Rockchip RK35xx series, plus the RK3588 'MNT
Reform 2' laptop"
* tag 'soc-dt-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (538 commits)
arm64: dts: Add gpio_intc node for Amlogic A5 SoCs
arm64: dts: Add gpio_intc node for Amlogic A4 SoCs
arm64: dts: hi3660: Add property for fixing CPUIdle
arm64: dts: rockchip: remove ethm0_clk0_25m_out from Sige5 gmac0
arm64: dts: marvell: Use preferred node names for "simple-bus"
arm64: dts: marvell: Drop unused CP11X_TYPE define
arm64: dts: marvell: Move arch timer and pmu nodes to top-level
arm64: dts: rockchip: Fix PWM pinctrl names
arm64: dts: rockchip: fix RK3576 SCMI clock IDs
dt-bindings: clock: rk3576: add SCMI clocks
arm64: dts: rockchip: Fix pcie reset gpio on Orange Pi 5 Max
arm64: dts: amd/seattle: Drop undocumented "spi-controller" properties
arm64: dts: amd/seattle: Fix bus, mmc, and ethernet node names
arm64: dts: amd/seattle: Move and simplify fixed clocks
arm64: dts: amd/seattle: Base Overdrive B1 on top of B0 version
arm64: dts: rockchip: Enable HDMI audio output for ArmSoM Sige7
arm64: dts: rockchip: Enable onboard eMMC on Radxa E20C
arm64: dts: rockchip: Add SDHCI controller for RK3528
arm64: dts: rockchip: Remove bluetooth node from rock-3a
arm64: dts: rockchip: Move rk356x scmi SHMEM to reserved memory
...
|
||
|
Linus Torvalds
|
2e3fcbcc3b |
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr, mpt3sas) and the removal of cxlflash. The only non-trivial core change is an addition to unit attention handling to recognize UAs for power on/reset and new media so the tape driver can use it" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (107 commits) scsi: st: Tighten the page format heuristics with MODE SELECT scsi: st: ERASE does not change tape location scsi: st: Fix array overflow in st_setup() scsi: target: tcm_loop: Fix wrong abort tag scsi: lpfc: Restore clearing of NLP_UNREG_INP in ndlp->nlp_flag scsi: hisi_sas: Fixed failure to issue vendor specific commands scsi: fnic: Remove unnecessary NUL-terminations scsi: fnic: Remove redundant flush_workqueue() calls scsi: core: Use a switch statement when attaching VPD pages scsi: ufs: renesas: Add initialization code for R-Car S4-8 ES1.2 scsi: ufs: renesas: Add reusable functions scsi: ufs: renesas: Refactor 0x10ad/0x10af PHY settings scsi: ufs: renesas: Remove register control helper function scsi: ufs: renesas: Add register read to remove save/set/restore scsi: ufs: renesas: Replace init data by init code scsi: ufs: dt-bindings: renesas,ufs: Add calibration data scsi: mpi3mr: Task Abort EH Support scsi: storvsc: Don't report the host packet status as the hv status scsi: isci: Make most module parameters static scsi: megaraid_sas: Make most module parameters static ... |
||
|
Eric Biggers
|
d48b663f41 |
arm64/crc-t10dif: fix use of out-of-scope array in crc_t10dif_arch()
Fix a silly bug where an array was used outside of its scope.
Fixes:
|
||
|
Linus Torvalds
|
fb1ceb29b2 |
Merge tag 'platform-drivers-x86-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers updates from Ilpo Järvinen:
- alienware-wmi:
- Refactor and split WMAX/legacy drivers
- dell-ddv:
- Correct +0.1 offset in temperature
- Use the power supply extension mechanism for battery temperatures
- intel/pmc:
- Refactor init to mostly use a common init function
- Add support for Arrow Lake U/H
- Add support for Panther Lake
- intel/sst:
- Improve multi die handling
- Prefix header search path with sysroot (fixes cross-compiling)
- lenovo-wmi-hotkey-utilities:
- Support for mic & audio mute LEDs
- samsung-galaxybook:
- Add driver for Samsung Galaxy Book series
- wmi:
- Rework WCxx/WExx ACPI method handling
- Enable data block collection when the data block is set
- platform/arm:
- Add Huawei Matebook E Go EC driver
- platform/mellanox:
- Relocate to drivers/platform/mellanox/
- mlxbf-bootctl:
- RTC battery status sysfs support
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (75 commits)
platform/x86: x86-android-tablets: Add select POWER_SUPPLY to Kconfig
platform/x86/amd/pmf: convert timeouts to secs_to_jiffies()
platform/x86: thinkpad_acpi: convert timeouts to secs_to_jiffies()
irqdomain: platform/x86: Switch to irq_domain_create_linear()
platform/x86/amd/pmc: fix leak in probe()
tools/power/x86/intel-speed-select: v1.22 release
tools/power/x86/intel-speed-select: Prefix header search path with sysroot
tools/power/x86/intel-speed-select: Die ID for IO dies
tools/power/x86/intel-speed-select: Fix the condition to check multi die system
tools/power/x86/intel-speed-select: Prevent increasing MAX_DIE_PER_PACKAGE
platform/x86/amd/pmc: Use managed APIs for mutex
platform/x86/amd/pmc: Remove unnecessary line breaks
platform/x86/amd/pmc: Move macros and structures to the PMC header file
platform/x86/amd/pmc: Notify user when platform does not support s0ix transition
platform/x86: dell-ddv: Use the power supply extension mechanism
platform/x86: dell-ddv: Use devm_battery_hook_register
platform/x86: dell-ddv: Fix temperature calculation
platform/x86: thinkpad_acpi: check the return value of devm_mutex_init()
platform/x86: samsung-galaxybook: Fix block_recording not supported logic
platform/x86: dell-uart-backlight: Make dell_uart_bl_serdev_driver static
...
|
||
|
Linus Torvalds
|
e2ae6e14d7 |
Merge tag 'regulator-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This has been a very quiet release, we've got support for one device
added, another removed, and some smaller fixes and API improvements.
The main thing of note is the rework of the PCA9450 LDO5 handling.
- A rework of the handling of LDO5 on the PCA9450, this was quite
wrong in how it handled the SD_VSEL conrol and only worked for some
system designs. This includes a DTS update since there was a not
quite ABI compatible change as part of the fix
- A devres change introducing devm_kmemdup_array() was pulled in so
it could be used with some regulator conversions to that function,
this pulled in some other devres and IIO stuff that was part of the
same pull request
- Removal of the PCF50633 driver, the SoC for the OpenMoko platform
that used it has been removed
- Support for the NXP PF9453"
* tag 'regulator-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (24 commits)
regulator: axp20x: AXP717: dcdc4 doesn't have delay
regulator: dt-bindings: rtq2208: Cleanup whitespace
regulator: dt-bindings: rtq2208: Mark fixed LDO VOUT property as deprecated
regulator: rtq6752: make const read-only array fault_mask static
regulator: pf9453: add PMIC PF9453 support
regulator: dt-bindings: pca9450: Add nxp,pf9453 compatible string
regulator: pcf50633-regulator: Remove
regulator: pca9450: Handle hardware with fixed SD_VSEL for LDO5
regulator: cros-ec: use devm_kmemdup_array()
regulator: devres: use devm_kmemdup_array()
regulator: Add (devm_)of_regulator_get()
devres: Introduce devm_kmemdup_array()
iio: imu: st_lsm9ds0: Replace device.h with what is needed
driver core: Split devres APIs to device/devres.h
err.h: move IOMEM_ERR_PTR() to err.h
regulator: pca9450: Remove duplicate code in probe
regulator: ad5398: Fix incorrect power down bit mask
regulator: pca9450: Fix enable register for LDO5
regulator: pca9450: Fix control register for LDO5
Revert "regulator: pca9450: Add SD_VSEL GPIO for LDO5"
...
|
||
|
Linus Torvalds
|
ee6740fd34 |
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
"Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like
what I did last cycle for the CRC32 and CRC-T10DIF library
functions
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since
they are no longer needed there
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect
- Add kunit test cases for crc64_nvme and crc7
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c()
- Remove unnecessary prompts from some of the CRC kconfig options
- Further optimize the x86 crc32c code"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (36 commits)
x86/crc: drop the avx10_256 functions and rename avx10_512 to avx512
lib/crc: remove unnecessary prompt for CONFIG_CRC64
lib/crc: remove unnecessary prompt for CONFIG_LIBCRC32C
lib/crc: remove unnecessary prompt for CONFIG_CRC8
lib/crc: remove unnecessary prompt for CONFIG_CRC7
lib/crc: remove unnecessary prompt for CONFIG_CRC4
lib/crc7: unexport crc7_be_syndrome_table
lib/crc_kunit.c: update comment in crc_benchmark()
lib/crc_kunit.c: add test and benchmark for crc7_be()
x86/crc32: optimize tail handling for crc32c short inputs
riscv/crc64: add Zbc optimized CRC64 functions
riscv/crc-t10dif: add Zbc optimized CRC-T10DIF function
riscv/crc32: reimplement the CRC32 functions using new template
riscv/crc: add "template" for Zbc optimized CRC functions
x86/crc: add ANNOTATE_NOENDBR to suppress objtool warnings
x86/crc32: improve crc32c_arch() code generation with clang
x86/crc64: implement crc64_be and crc64_nvme using new template
x86/crc-t10dif: implement crc_t10dif using new template
x86/crc32: implement crc32_le using new template
x86/crc: add "template" for [V]PCLMULQDQ based CRC functions
...
|
||
|
Linus Torvalds
|
a5b3d8660b |
Merge tag 'hyperv-next-signed-20250324' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu: - Add support for running as the root partition in Hyper-V (Microsoft Hypervisor) by exposing /dev/mshv (Nuno and various people) - Add support for CPU offlining in Hyper-V (Hamza Mahfooz) - Misc fixes and cleanups (Roman Kisel, Tianyu Lan, Wei Liu, Michael Kelley, Thorsten Blum) * tag 'hyperv-next-signed-20250324' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (24 commits) x86/hyperv: fix an indentation issue in mshyperv.h x86/hyperv: Add comments about hv_vpset and var size hypercall input args Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs hyperv: Add definitions for root partition driver to hv headers x86: hyperv: Add mshv_handler() irq handler and setup function Drivers: hv: Introduce per-cpu event ring tail Drivers: hv: Export some functions for use by root partition module acpi: numa: Export node_to_pxm() hyperv: Introduce hv_recommend_using_aeoi() arm64/hyperv: Add some missing functions to arm64 x86/mshyperv: Add support for extended Hyper-V features hyperv: Log hypercall status codes as strings x86/hyperv: Fix check of return value from snp_set_vmsa() x86/hyperv: Add VTL mode callback for restarting the system x86/hyperv: Add VTL mode emergency restart callback hyperv: Remove unused union and structs hyperv: Add CONFIG_MSHV_ROOT to gate root partition support hyperv: Change hv_root_partition into a function hyperv: Convert hypercall statuses to linux error codes drivers/hv: add CPU offlining support ... |
||
|
Linus Torvalds
|
edb0e8f6e2 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
- Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
- Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
- Paravirtual interface for discovering the set of CPU
implementations where a VM may run, addressing a longstanding issue
of guest CPU errata awareness in big-little systems and
cross-implementation VM migration
- Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
- pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
- Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
LoongArch:
- Remove unnecessary header include path
- Assume constant PGD during VM context switch
- Add perf events support for guest VM
RISC-V:
- Disable the kernel perf counter during configure
- KVM selftests improvements for PMU
- Fix warning at the time of KVM module removal
x86:
- Add support for aging of SPTEs without holding mmu_lock.
Not taking mmu_lock allows multiple aging actions to run in
parallel, and more importantly avoids stalling vCPUs. This includes
an implementation of per-rmap-entry locking; aging the gfn is done
with only a per-rmap single-bin spinlock taken, whereas locking an
rmap for write requires taking both the per-rmap spinlock and the
mmu_lock.
Note that this decreases slightly the accuracy of accessed-page
information, because changes to the SPTE outside aging might not
use atomic operations even if they could race against a clear of
the Accessed bit.
This is deliberate because KVM and mm/ tolerate false
positives/negatives for accessed information, and testing has shown
that reducing the latency of aging is far more beneficial to
overall system performance than providing "perfect" young/old
information.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction,
to coalesce updates when multiple pieces of vCPU state are
changing, e.g. as part of a nested transition
- Fix a variety of nested emulation bugs, and add VMX support for
synthesizing nested VM-Exit on interception (instead of injecting
#UD into L2)
- Drop "support" for async page faults for protected guests that do
not set SEND_ALWAYS (i.e. that only want async page faults at CPL3)
- Bring a bit of sanity to x86's VM teardown code, which has
accumulated a lot of cruft over the years. Particularly, destroy
vCPUs before the MMU, despite the latter being a VM-wide operation
- Add common secure TSC infrastructure for use within SNP and in the
future TDX
- Block KVM_CAP_SYNC_REGS if guest state is protected. It does not
make sense to use the capability if the relevant registers are not
available for reading or writing
- Don't take kvm->lock when iterating over vCPUs in the suspend
notifier to fix a largely theoretical deadlock
- Use the vCPU's actual Xen PV clock information when starting the
Xen timer, as the cached state in arch.hv_clock can be stale/bogus
- Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across
different PV clocks; restrict PVCLOCK_GUEST_STOPPED to kvmclock, as
KVM's suspend notifier only accounts for kvmclock, and there's no
evidence that the flag is actually supported by Xen guests
- Clean up the per-vCPU "cache" of its reference pvclock, and instead
only track the vCPU's TSC scaling (multipler+shift) metadata (which
is moderately expensive to compute, and rarely changes for modern
setups)
- Don't write to the Xen hypercall page on MSR writes that are
initiated by the host (userspace or KVM) to fix a class of bugs
where KVM can write to guest memory at unexpected times, e.g.
during vCPU creation if userspace has set the Xen hypercall MSR
index to collide with an MSR that KVM emulates
- Restrict the Xen hypercall MSR index to the unofficial synthetic
range to reduce the set of possible collisions with MSRs that are
emulated by KVM (collisions can still happen as KVM emulates
Hyper-V MSRs, which also reside in the synthetic range)
- Clean up and optimize KVM's handling of Xen MSR writes and
xen_hvm_config
- Update Xen TSC leaves during CPUID emulation instead of modifying
the CPUID entries when updating PV clocks; there is no guarantee PV
clocks will be updated between TSC frequency changes and CPUID
emulation, and guest reads of the TSC leaves should be rare, i.e.
are not a hot path
x86 (Intel):
- Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and
thus modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1
- Pass XFD_ERR as the payload when injecting #NM, as a preparatory
step for upcoming FRED virtualization support
- Decouple the EPT entry RWX protection bit macros from the EPT
Violation bits, both as a general cleanup and in anticipation of
adding support for emulating Mode-Based Execution Control (MBEC)
- Reject KVM_RUN if userspace manages to gain control and stuff
invalid guest state while KVM is in the middle of emulating nested
VM-Enter
- Add a macro to handle KVM's sanity checks on entry/exit VMCS
control pairs in anticipation of adding sanity checks for secondary
exit controls (the primary field is out of bits)
x86 (AMD):
- Ensure the PSP driver is initialized when both the PSP and KVM
modules are built-in (the initcall framework doesn't handle
dependencies)
- Use long-term pins when registering encrypted memory regions, so
that the pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and
don't lead to excessive fragmentation
- Add macros and helpers for setting GHCB return/error codes
- Add support for Idle HLT interception, which elides interception if
the vCPU has a pending, unmasked virtual IRQ when HLT is executed
- Fix a bug in INVPCID emulation where KVM fails to check for a
non-canonical address
- Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is
invalid, e.g. because the vCPU was "destroyed" via SNP's AP
Creation hypercall
- Reject SNP AP Creation if the requested SEV features for the vCPU
don't match the VM's configured set of features
Selftests:
- Fix again the Intel PMU counters test; add a data load and do
CLFLUSH{OPT} on the data instead of executing code. The theory is
that modern Intel CPUs have learned new code prefetching tricks
that bypass the PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that an
event is counting correctly without actually knowing what the event
counts on the underlying hardware
- Fix a variety of flaws, bugs, and false failures/passes
dirty_log_test, and improve its coverage by collecting all dirty
entries on each iteration
- Fix a few minor bugs related to handling of stats FDs
- Add infrastructure to make vCPU and VM stats FDs available to tests
by default (open the FDs during VM/vCPU creation)
- Relax an assertion on the number of HLT exits in the xAPIC IPI test
when running on a CPU that supports AMD's Idle HLT (which elides
interception of HLT if a virtual IRQ is pending and unmasked)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (216 commits)
RISC-V: KVM: Optimize comments in kvm_riscv_vcpu_isa_disable_allowed
RISC-V: KVM: Teardown riscv specific bits after kvm_exit
LoongArch: KVM: Register perf callbacks for guest
LoongArch: KVM: Implement arch-specific functions for guest perf
LoongArch: KVM: Add stub for kvm_arch_vcpu_preempted_in_kernel()
LoongArch: KVM: Remove PGD saving during VM context switch
LoongArch: KVM: Remove unnecessary header include path
KVM: arm64: Tear down vGIC on failed vCPU creation
KVM: arm64: PMU: Reload when resetting
KVM: arm64: PMU: Reload when user modifies registers
KVM: arm64: PMU: Fix SET_ONE_REG for vPMC regs
KVM: arm64: PMU: Assume PMU presence in pmu-emul.c
KVM: arm64: PMU: Set raw values from user to PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
KVM: arm64: Create each pKVM hyp vcpu after its corresponding host vcpu
KVM: arm64: Factor out pKVM hyp vcpu creation to separate function
KVM: arm64: Initialize HCRX_EL2 traps in pKVM
KVM: arm64: Factor out setting HCRX_EL2 traps into separate function
KVM: x86: block KVM_CAP_SYNC_REGS if guest state is protected
KVM: x86: Add infrastructure for secure TSC
KVM: x86: Push down setting vcpu.arch.user_set_tsc
...
|
||
|
Linus Torvalds
|
2d09a9449e |
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"Nothing major this time around.
Apart from the usual perf/PMU updates, some page table cleanups, the
notable features are average CPU frequency based on the AMUv1
counters, CONFIG_HOTPLUG_SMT and MOPS instructions (memcpy/memset) in
the uaccess routines.
Perf and PMUs:
- Support for the 'Rainier' CPU PMU from Arm
- Preparatory driver changes and cleanups that pave the way for BRBE
support
- Support for partial virtualisation of the Apple-M1 PMU
- Support for the second event filter in Arm CSPMU designs
- Minor fixes and cleanups (CMN and DWC PMUs)
- Enable EL2 requirements for FEAT_PMUv3p9
Power, CPU topology:
- Support for AMUv1-based average CPU frequency
- Run-time SMT control wired up for arm64 (CONFIG_HOTPLUG_SMT). It
adds a generic topology_is_primary_thread() function overridden by
x86 and powerpc
New(ish) features:
- MOPS (memcpy/memset) support for the uaccess routines
Security/confidential compute:
- Fix the DMA address for devices used in Realms with Arm CCA. The
CCA architecture uses the address bit to differentiate between
shared and private addresses
- Spectre-BHB: assume CPUs Linux doesn't know about vulnerable by
default
Memory management clean-ups:
- Drop the P*D_TABLE_BIT definition in preparation for 128-bit PTEs
- Some minor page table accessor clean-ups
- PIE/POE (permission indirection/overlay) helpers clean-up
Kselftests:
- MTE: skip hugetlb tests if MTE is not supported on such mappings
and user correct naming for sync/async tag checking modes
Miscellaneous:
- Add a PKEY_UNRESTRICTED definition as 0 to uapi (toolchain people
request)
- Sysreg updates for new register fields
- CPU type info for some Qualcomm Kryo cores"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (72 commits)
arm64: mm: Don't use %pK through printk
perf/arm_cspmu: Fix missing io.h include
arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists
arm64: cputype: Add MIDR_CORTEX_A76AE
arm64: errata: Add KRYO 2XX/3XX/4XX silver cores to Spectre BHB safe list
arm64: errata: Assume that unknown CPUs _are_ vulnerable to Spectre BHB
arm64: errata: Add QCOM_KRYO_4XX_GOLD to the spectre_bhb_k24_list
arm64/sysreg: Enforce whole word match for open/close tokens
arm64/sysreg: Fix unbalanced closing block
arm64: Kconfig: Enable HOTPLUG_SMT
arm64: topology: Support SMT control on ACPI based system
arch_topology: Support SMT control for OF based system
cpu/SMT: Provide a default topology_is_primary_thread()
arm64/mm: Define PTDESC_ORDER
perf/arm_cspmu: Add PMEVFILT2R support
perf/arm_cspmu: Generalise event filtering
perf/arm_cspmu: Move register definitons to header
arm64/kernel: Always use level 2 or higher for early mappings
arm64/mm: Drop PXD_TABLE_BIT
arm64/mm: Check pmd_table() in pmd_trans_huge()
...
|
||
|
Catalin Marinas
|
64fa6b9322 |
Merge branch 'for-next/el2-enable-feat-pmuv3p9' into for-next/core
* for-next/el2-enable-feat-pmuv3p9: : Enable EL2 requirements for FEAT_PMUv3p9 arm64/boot: Enable EL2 requirements for FEAT_PMUv3p9 |
||
|
Catalin Marinas
|
8ae9e2d832 |
Merge branch 'for-next/smt-control' into for-next/core
* for-next/smt-control: : Support SMT control on arm64 arm64: Kconfig: Enable HOTPLUG_SMT arm64: topology: Support SMT control on ACPI based system arch_topology: Support SMT control for OF based system cpu/SMT: Provide a default topology_is_primary_thread() |
||
|
Catalin Marinas
|
8cc14fdcc1 |
Merge branches 'for-next/amuv1-avg-freq', 'for-next/pkey_unrestricted', 'for-next/sysreg', 'for-next/misc', 'for-next/pgtable-cleanups', 'for-next/kselftest', 'for-next/uaccess-mops', 'for-next/pie-poe-cleanup', 'for-next/cputype-kryo', 'for-next/cca-dma-address', 'for-next/drop-pxd_table_bit' and 'for-next/spectre-bhb-assume-vulnerable', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf/arm_cspmu: Fix missing io.h include
perf/arm_cspmu: Add PMEVFILT2R support
perf/arm_cspmu: Generalise event filtering
perf/arm_cspmu: Move register definitons to header
drivers/perf: apple_m1: Support host/guest event filtering
drivers/perf: apple_m1: Refactor event select/filter configuration
perf/dwc_pcie: fix duplicate pci_dev devices
perf/dwc_pcie: fix some unreleased resources
perf/arm-cmn: Minor event type housekeeping
perf: arm_pmu: Move PMUv3-specific data
perf: apple_m1: Don't disable counter in m1_pmu_enable_event()
perf: arm_v7_pmu: Don't disable counter in (armv7|krait_|scorpion_)pmu_enable_event()
perf: arm_v7_pmu: Drop obvious comments for enabling/disabling counters and interrupts
perf: arm_pmuv3: Don't disable counter in armv8pmu_enable_event()
perf: arm_pmu: Don't disable counter in armpmu_add()
perf: arm_pmuv3: Call kvm_vcpu_pmu_resync_el0() before enabling counters
perf: arm_pmuv3: Add support for ARM Rainier PMU
* for-next/amuv1-avg-freq:
: Add support for AArch64 AMUv1-based average freq
arm64: Utilize for_each_cpu_wrap for reference lookup
arm64: Update AMU-based freq scale factor on entering idle
arm64: Provide an AMU-based version of arch_freq_get_on_cpu
cpufreq: Introduce an optional cpuinfo_avg_freq sysfs entry
cpufreq: Allow arch_freq_get_on_cpu to return an error
arch_topology: init capacity_freq_ref to 0
* for-next/pkey_unrestricted:
: mm/pkey: Add PKEY_UNRESTRICTED macro
selftest/powerpc/mm/pkey: fix build-break introduced by commit
|
||
|
Linus Torvalds
|
317a76a996 |
Merge tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO infrastructure updates from Thomas Gleixner: - Consolidate the VDSO storage The VDSO data storage and data layout has been largely architecture specific for historical reasons. That increases the maintenance effort and causes inconsistencies over and over. There is no real technical reason for architecture specific layouts and implementations. The architecture specific details can easily be integrated into a generic layout, which also reduces the amount of duplicated code for managing the mappings. Convert all architectures over to a unified layout and common mapping infrastructure. This splits the VDSO data layout into subsystem specific blocks, timekeeping, random and architecture parts, which provides a better structure and allows to improve and update the functionalities without conflict and interaction. - Rework the timekeeping data storage The current implementation is designed for exposing system timekeeping accessors, which was good enough at the time when it was designed. PTP and Time Sensitive Networking (TSN) change that as there are requirements to expose independent PTP clocks, which are not related to system timekeeping. Replace the monolithic data storage by a structured layout, which allows to add support for independent PTP clocks on top while reusing both the data structures and the time accessor implementations. * tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits) sparc/vdso: Always reject undefined references during linking x86/vdso: Always reject undefined references during linking vdso: Rework struct vdso_time_data and introduce struct vdso_clock vdso: Move architecture related data before basetime data powerpc/vdso: Prepare introduction of struct vdso_clock arm64/vdso: Prepare introduction of struct vdso_clock x86/vdso: Prepare introduction of struct vdso_clock time/namespace: Prepare introduction of struct vdso_clock vdso/namespace: Rename timens_setup_vdso_data() to reflect new vdso_clock struct vdso/vsyscall: Prepare introduction of struct vdso_clock vdso/gettimeofday: Prepare helper functions for introduction of struct vdso_clock vdso/gettimeofday: Prepare do_coarse_timens() for introduction of struct vdso_clock vdso/gettimeofday: Prepare do_coarse() for introduction of struct vdso_clock vdso/gettimeofday: Prepare do_hres_timens() for introduction of struct vdso_clock vdso/gettimeofday: Prepare do_hres() for introduction of struct vdso_clock vdso/gettimeofday: Prepare introduction of struct vdso_clock vdso/helpers: Prepare introduction of struct vdso_clock vdso/datapage: Define vdso_clock to prepare for multiple PTP clocks vdso: Make vdso_time_data cacheline aligned arm64: Make asm/cache.h compatible with vDSO ... |
||
|
Linus Torvalds
|
a50b4fe095 |
Merge tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner: "A treewide hrtimer timer cleanup hrtimers are initialized with hrtimer_init() and a subsequent store to the callback pointer. This turned out to be suboptimal for the upcoming Rust integration and is obviously a silly implementation to begin with. This cleanup replaces the hrtimer_init(T); T->function = cb; sequence with hrtimer_setup(T, cb); The conversion was done with Coccinelle and a few manual fixups. Once the conversion has completely landed in mainline, hrtimer_init() will be removed and the hrtimer::function becomes a private member" * tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits) wifi: rt2x00: Switch to use hrtimer_update_function() io_uring: Use helper function hrtimer_update_function() serial: xilinx_uartps: Use helper function hrtimer_update_function() ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup() RDMA: Switch to use hrtimer_setup() virtio: mem: Switch to use hrtimer_setup() drm/vmwgfx: Switch to use hrtimer_setup() drm/xe/oa: Switch to use hrtimer_setup() drm/vkms: Switch to use hrtimer_setup() drm/msm: Switch to use hrtimer_setup() drm/i915/request: Switch to use hrtimer_setup() drm/i915/uncore: Switch to use hrtimer_setup() drm/i915/pmu: Switch to use hrtimer_setup() drm/i915/perf: Switch to use hrtimer_setup() drm/i915/gvt: Switch to use hrtimer_setup() drm/i915/huc: Switch to use hrtimer_setup() drm/amdgpu: Switch to use hrtimer_setup() stm class: heartbeat: Switch to use hrtimer_setup() i2c: Switch to use hrtimer_setup() iio: Switch to use hrtimer_setup() ... |
||
|
Linus Torvalds
|
0f40464674 |
Merge tag 'irq-drivers-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq driver updates from Thomas Gleixner:
- Support for hard indices on RISC-V. The hart index identifies a hart
(core) within a specific interrupt domain in RISC-V's Priviledged
Architecture.
- Rework of the RISC-V MSI driver
This moves the driver over to the generic MSI library and solves the
affinity problem of unmaskable PCI/MSI controllers. Unmaskable
PCI/MSI controllers are prone to lose interrupts when the MSI message
is updated to change the affinity because the message write consists
of three 32-bit subsequent writes, which update address and data. As
these writes are non-atomic versus the device raising an interrupt,
the device can observe a half written update and issue an interrupt
on the wrong vector. This is mitiated by a carefully orchestrated
step by step update and the observation of an eventually pending
interrupt on the CPU which issues the update. The algorithm follows
the well established method of the X86 MSI driver.
- A new driver for the RISC-V Sophgo SG2042 MSI controller
- Overhaul of the Renesas RZQ2L driver
Simplification of the probe function by using devm_*() mechanisms,
which avoid the endless list of error prone gotos in the failure
paths.
- Expand the Renesas RZV2H driver to support RZ/G3E SoCs
- A workaround for Rockchip 3568002 erratum in the GIC-V3 driver to
ensure that the addressing is limited to the lower 32-bit of the
physical address space.
- Add support for the Allwinner AS23 NMI controller
- Expand the IMX irqsteer driver to handle up to 960 input interrupts
- The usual small updates, cleanups and device tree changes
* tag 'irq-drivers-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
irqchip/imx-irqsteer: Support up to 960 input interrupts
irqchip/sunxi-nmi: Support Allwinner A523 NMI controller
dt-bindings: irq: sun7i-nmi: Document the Allwinner A523 NMI controller
irqchip/davinci-cp-intc: Remove public header
irqchip/renesas-rzv2h: Add RZ/G3E support
irqchip/renesas-rzv2h: Update macros ICU_TSSR_TSSEL_{MASK,PREP}
irqchip/renesas-rzv2h: Update TSSR_TIEN macro
irqchip/renesas-rzv2h: Add field_width to struct rzv2h_hw_info
irqchip/renesas-rzv2h: Add max_tssel to struct rzv2h_hw_info
irqchip/renesas-rzv2h: Add struct rzv2h_hw_info with t_offs variable
irqchip/renesas-rzv2h: Use devm_pm_runtime_enable()
irqchip/renesas-rzv2h: Use devm_reset_control_get_exclusive_deasserted()
irqchip/renesas-rzv2h: Simplify rzv2h_icu_init()
irqchip/renesas-rzv2h: Drop irqchip from struct rzv2h_icu_priv
irqchip/renesas-rzv2h: Fix wrong variable usage in rzv2h_tint_set_type()
dt-bindings: interrupt-controller: renesas,rzv2h-icu: Document RZ/G3E SoC
riscv: sophgo: dts: Add msi controller for SG2042
irqchip: Add the Sophgo SG2042 MSI interrupt controller
dt-bindings: interrupt-controller: Add Sophgo SG2042 MSI
arm64: dts: rockchip: rk356x: Move PCIe MSI to use GIC ITS instead of MBI
...
|
||
|
Linus Torvalds
|
32b22538be |
Merge tag 'sched-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core & fair scheduler changes:
- Cancel the slice protection of the idle entity (Zihan Zhou)
- Reduce the default slice to avoid tasks getting an extra tick
(Zihan Zhou)
- Force propagating min_slice of cfs_rq when {en,de}queue tasks
(Tianchen Ding)
- Refactor can_migrate_task() to elimate looping (I Hsin Cheng)
- Add unlikey branch hints to several system calls (Colin Ian King)
- Optimize current_clr_polling() on certain architectures (Yujun
Dong)
Deadline scheduler: (Juri Lelli)
- Remove redundant dl_clear_root_domain call
- Move dl_rebuild_rd_accounting to cpuset.h
Uclamp:
- Use the uclamp_is_used() helper instead of open-coding it (Xuewen
Yan)
- Optimize sched_uclamp_used static key enabling (Xuewen Yan)
Scheduler topology support: (Juri Lelli)
- Ignore special tasks when rebuilding domains
- Add wrappers for sched_domains_mutex
- Generalize unique visiting of root domains
- Rebuild root domain accounting after every update
- Remove partition_and_rebuild_sched_domains
- Stop exposing partition_sched_domains_locked
RSEQ: (Michael Jeanson)
- Update kernel fields in lockstep with CONFIG_DEBUG_RSEQ=y
- Fix segfault on registration when rseq_cs is non-zero
- selftests: Add rseq syscall errors test
- selftests: Ensure the rseq ABI TLS is actually 1024 bytes
Membarriers:
- Fix redundant load of membarrier_state (Nysal Jan K.A.)
Scheduler debugging:
- Introduce and use preempt_model_str() (Sebastian Andrzej Siewior)
- Make CONFIG_SCHED_DEBUG unconditional (Ingo Molnar)
Fixes and cleanups:
- Always save/restore x86 TSC sched_clock() on suspend/resume
(Guilherme G. Piccoli)
- Misc fixes and cleanups (Thorsten Blum, Juri Lelli, Sebastian
Andrzej Siewior)"
* tag 'sched-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
cpuidle, sched: Use smp_mb__after_atomic() in current_clr_polling()
sched/debug: Remove CONFIG_SCHED_DEBUG
sched/debug: Remove CONFIG_SCHED_DEBUG from self-test config files
sched/debug, Documentation: Remove (most) CONFIG_SCHED_DEBUG references from documentation
sched/debug: Make CONFIG_SCHED_DEBUG functionality unconditional
sched/debug: Make 'const_debug' tunables unconditional __read_mostly
sched/debug: Change SCHED_WARN_ON() to WARN_ON_ONCE()
rseq/selftests: Fix namespace collision with rseq UAPI header
include/{topology,cpuset}: Move dl_rebuild_rd_accounting to cpuset.h
sched/topology: Stop exposing partition_sched_domains_locked
cgroup/cpuset: Remove partition_and_rebuild_sched_domains
sched/topology: Remove redundant dl_clear_root_domain call
sched/deadline: Rebuild root domain accounting after every update
sched/deadline: Generalize unique visiting of root domains
sched/topology: Wrappers for sched_domains_mutex
sched/deadline: Ignore special tasks when rebuilding domains
tracing: Use preempt_model_str()
xtensa: Rely on generic printing of preemption model
x86: Rely on generic printing of preemption model
s390: Rely on generic printing of preemption model
...
|
||
|
Linus Torvalds
|
fd101da676 |
Merge tag 'vfs-6.15-rc1.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
- Mount notifications
The day has come where we finally provide a new api to listen for
mount topology changes outside of /proc/<pid>/mountinfo. A mount
namespace file descriptor can be supplied and registered with
fanotify to listen for mount topology changes.
Currently notifications for mount, umount and moving mounts are
generated. The generated notification record contains the unique
mount id of the mount.
The listmount() and statmount() api can be used to query detailed
information about the mount using the received unique mount id.
This allows userspace to figure out exactly how the mount topology
changed without having to generating diffs of /proc/<pid>/mountinfo
in userspace.
- Support O_PATH file descriptors with FSCONFIG_SET_FD in the new mount
api
- Support detached mounts in overlayfs
Since last cycle we support specifying overlayfs layers via file
descriptors. However, we don't allow detached mounts which means
userspace cannot user file descriptors received via
open_tree(OPEN_TREE_CLONE) and fsmount() directly. They have to
attach them to a mount namespace via move_mount() first.
This is cumbersome and means they have to undo mounts via umount().
Allow them to directly use detached mounts.
- Allow to retrieve idmappings with statmount
Currently it isn't possible to figure out what idmapping has been
attached to an idmapped mount. Add an extension to statmount() which
allows to read the idmapping from the mount.
- Allow creating idmapped mounts from mounts that are already idmapped
So far it isn't possible to allow the creation of idmapped mounts
from already idmapped mounts as this has significant lifetime
implications. Make the creation of idmapped mounts atomic by allow to
pass struct mount_attr together with the open_tree_attr() system call
allowing to solve these issues without complicating VFS lookup in any
way.
The system call has in general the benefit that creating a detached
mount and applying mount attributes to it becomes an atomic operation
for userspace.
- Add a way to query statmount() for supported options
Allow userspace to query which mount information can be retrieved
through statmount().
- Allow superblock owners to force unmount
* tag 'vfs-6.15-rc1.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (21 commits)
umount: Allow superblock owners to force umount
selftests: add tests for mount notification
selinux: add FILE__WATCH_MOUNTNS
samples/vfs: fix printf format string for size_t
fs: allow changing idmappings
fs: add kflags member to struct mount_kattr
fs: add open_tree_attr()
fs: add copy_mount_setattr() helper
fs: add vfs_open_tree() helper
statmount: add a new supported_mask field
samples/vfs: add STATMOUNT_MNT_{G,U}IDMAP
selftests: add tests for using detached mount with overlayfs
samples/vfs: check whether flag was raised
statmount: allow to retrieve idmappings
uidgid: add map_id_range_up()
fs: allow detached mounts in clone_private_mount()
selftests/overlayfs: test specifying layers as O_PATH file descriptors
fs: support O_PATH fds with FSCONFIG_SET_FD
vfs: add notifications for mount attach and detach
fanotify: notify on mount attach and detach
...
|
||
|
Linus Torvalds
|
99c21beaab |
Merge tag 'vfs-6.15-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- Add CONFIG_DEBUG_VFS infrastucture:
- Catch invalid modes in open
- Use the new debug macros in inode_set_cached_link()
- Use debug-only asserts around fd allocation and install
- Place f_ref to 3rd cache line in struct file to resolve false
sharing
Cleanups:
- Start using anon_inode_getfile_fmode() helper in various places
- Don't take f_lock during SEEK_CUR if exclusion is guaranteed by
f_pos_lock
- Add unlikely() to kcmp()
- Remove legacy ->remount_fs method from ecryptfs after port to the
new mount api
- Remove invalidate_inodes() in favour of evict_inodes()
- Simplify ep_busy_loopER by removing unused argument
- Avoid mmap sem relocks when coredumping with many missing pages
- Inline getname()
- Inline new_inode_pseudo() and de-staticize alloc_inode()
- Dodge an atomic in putname if ref == 1
- Consistently deref the files table with rcu_dereference_raw()
- Dedup handling of struct filename init and refcounts bumps
- Use wq_has_sleeper() in end_dir_add()
- Drop the lock trip around I_NEW wake up in evict()
- Load the ->i_sb pointer once in inode_sb_list_{add,del}
- Predict not reaching the limit in alloc_empty_file()
- Tidy up do_sys_openat2() with likely/unlikely
- Call inode_sb_list_add() outside of inode hash lock
- Sort out fd allocation vs dup2 race commentary
- Turn page_offset() into a wrapper around folio_pos()
- Remove locking in exportfs around ->get_parent() call
- try_lookup_one_len() does not need any locks in autofs
- Fix return type of several functions from long to int in open
- Fix return type of several functions from long to int in ioctls
Fixes:
- Fix watch queue accounting mismatch"
* tag 'vfs-6.15-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (30 commits)
fs: sort out fd allocation vs dup2 race commentary, take 2
fs: call inode_sb_list_add() outside of inode hash lock
fs: tidy up do_sys_openat2() with likely/unlikely
fs: predict not reaching the limit in alloc_empty_file()
fs: load the ->i_sb pointer once in inode_sb_list_{add,del}
fs: drop the lock trip around I_NEW wake up in evict()
fs: use wq_has_sleeper() in end_dir_add()
VFS/autofs: try_lookup_one_len() does not need any locks
fs: dedup handling of struct filename init and refcounts bumps
fs: consistently deref the files table with rcu_dereference_raw()
exportfs: remove locking around ->get_parent() call.
fs: use debug-only asserts around fd allocation and install
fs: dodge an atomic in putname if ref == 1
vfs: Remove invalidate_inodes()
ecryptfs: remove NULL remount_fs from super_operations
watch_queue: fix pipe accounting mismatch
fs: place f_ref to 3rd cache line in struct file to resolve false sharing
epoll: simplify ep_busy_loop by removing always 0 argument
fs: Turn page_offset() into a wrapper around folio_pos()
kcmp: improve performance adding an unlikely hint to task comparisons
...
|
||
|
Eric Biggers
|
ca17aa6640 |
crypto: lib/chacha - remove unused arch-specific init support
All implementations of chacha_init_arch() just call chacha_init_generic(), so it is pointless. Just delete it, and replace chacha_init() with what was previously chacha_init_generic(). Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Nuno Das Neves
|
21050f6197 |
Drivers: hv: Export some functions for use by root partition module
hv_get_hypervisor_version(), hv_call_deposit_pages(), and hv_call_create_vp(), are all needed in-module with CONFIG_MSHV_ROOT=m. Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Stanislav Kinsburskii <skinsburskii@microsoft.linux.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com> Reviewed-by: Tianyu Lan <tiala@microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-7-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-7-git-send-email-nunodasneves@linux.microsoft.com> |