To support APX functionality, the EVEX prefix is used to:
- promote legacy instructions
- promote VEX instructions
- add new instructions
Promoted VEX instructions require no extra annotation because the opcodes
do not change and the permissive nature of the instruction decoder already
allows them to have an EVEX prefix.
Promoted legacy instructions and new instructions are placed in map 4 which
has not been used before.
Create a new table for map 4 and add APX instructions.
Annotate SCALABLE instructions with "(es)" - refer to patch "x86/insn: Add
support for APX EVEX to the instruction decoder logic". SCALABLE
instructions must be represented in both no-prefix (NP) and 66 prefix
forms.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-9-adrian.hunter@intel.com
Intel Advanced Performance Extensions (APX) extends the EVEX prefix to
support:
- extended general purpose registers (EGPRs) i.e. r16 to r31
- Push-Pop Acceleration (PPX) hints
- new data destination (NDD) register
- suppress status flags writes (NF) of common instructions
- new instructions
Refer to the Intel Advanced Performance Extensions (Intel APX) Architecture
Specification for details.
The extended EVEX prefix does not need amended instruction decoder logic,
except in one area. Some instructions are defined as SCALABLE which means
the EVEX.W bit and EVEX.pp bits are used to determine operand size.
Specifically, if an instruction is SCALABLE and EVEX.W is zero, then
EVEX.pp value 0 (representing no prefix NP) means default operand size,
whereas EVEX.pp value 1 (representing 66 prefix) means operand size
override i.e. 16 bits
Add an attribute (INAT_EVEX_SCALABLE) to identify such instructions, and
amend the logic appropriately.
Amend the awk script that generates the attribute tables from the opcode
map, to recognise "(es)" as attribute INAT_EVEX_SCALABLE.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-8-adrian.hunter@intel.com
Support for REX2 has been added to the instruction decoder logic and the
awk script that generates the attribute tables from the opcode map.
Add REX2 prefix byte (0xD5) to the opcode map.
Add annotation (!REX2) for map 0/1 opcodes that are reserved under REX2.
Add JMPABS to the opcode map and add annotation (REX2) to identify that it
has a mandatory REX2 prefix. A separate opcode attribute table is not
needed at this time because JMPABS has the same attribute encoding as the
MOV instruction that it shares an opcode with i.e. INAT_MOFFSET.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-7-adrian.hunter@intel.com
Intel Advanced Performance Extensions (APX) uses a new 2-byte prefix named
REX2 to select extended general purpose registers (EGPRs) i.e. r16 to r31.
The REX2 prefix is effectively an extended version of the REX prefix.
REX2 and EVEX are also used with PUSH/POP instructions to provide a
Push-Pop Acceleration (PPX) hint. With PPX hints, a CPU will attempt to
fast-forward register data between matching PUSH and POP instructions.
REX2 is valid only with opcodes in maps 0 and 1. Similar extension for
other maps is provided by the EVEX prefix, covered in a separate patch.
Some opcodes in maps 0 and 1 are reserved under REX2. One of these is used
for a new 64-bit absolute direct jump instruction JMPABS.
Refer to the Intel Advanced Performance Extensions (Intel APX) Architecture
Specification for details.
Define a code value for the REX2 prefix (INAT_PFX_REX2), and add attribute
flags for opcodes reserved under REX2 (INAT_NO_REX2) and to identify
opcodes (only JMPABS) that require a mandatory REX2 prefix
(INAT_REX2_VARIANT).
Amend logic to read the REX2 prefix and get the opcode attribute for the
map number (0 or 1) encoded in the REX2 prefix.
Amend the awk script that generates the attribute tables from the opcode
map, to recognise "REX2" as attribute INAT_PFX_REX2, and "(!REX2)"
as attribute INAT_NO_REX2, and "(REX2)" as attribute INAT_REX2_VARIANT.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-6-adrian.hunter@intel.com
The x86 instruction decoder is used not only for decoding kernel
instructions. It is also used by perf uprobes (user space probes) and by
perf tools Intel Processor Trace decoding. Consequently, it needs to
support instructions executed by user space also.
Add instructions documented in Intel Architecture Instruction Set
Extensions and Future Features Programming Reference March 2024
319433-052, that have not been added yet:
AADD
AAND
AOR
AXOR
CMPccXADD
PBNDKB
RDMSRLIST
URDMSR
UWRMSR
VBCSTNEBF162PS
VBCSTNESH2PS
VCVTNEEBF162PS
VCVTNEEPH2PS
VCVTNEOBF162PS
VCVTNEOPH2PS
VCVTNEPS2BF16
VPDPB[SU,UU,SS]D[,S]
VPDPW[SU,US,UU]D[,S]
VPMADD52HUQ
VPMADD52LUQ
VSHA512MSG1
VSHA512MSG2
VSHA512RNDS2
VSM3MSG1
VSM3MSG2
VSM3RNDS2
VSM4KEY4
VSM4RNDS4
WRMSRLIST
TCMMIMFP16PS
TCMMRLFP16PS
TDPFP16PS
PREFETCHIT1
PREFETCHIT0
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-5-adrian.hunter@intel.com
The x86 instruction decoder is used not only for decoding kernel
instructions. It is also used by perf uprobes (user space probes) and by
perf tools Intel Processor Trace decoding. Consequently, it needs to
support instructions executed by user space also.
Intel Architecture Instruction Set Extensions and Future Features manual
number 319433-044 of May 2021, documented VEX versions of instructions
VPDPBUSD, VPDPBUSDS, VPDPWSSD and VPDPWSSDS, but the opcode map has them
listed as EVEX only.
Remove EVEX-only (ev) annotation from instructions VPDPBUSD, VPDPBUSDS,
VPDPWSSD and VPDPWSSDS, which allows them to be decoded with either a VEX
or EVEX prefix.
Fixes: 0153d98f2d ("x86/insn: Add misc instructions to x86 instruction decoder")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-4-adrian.hunter@intel.com
The x86 instruction decoder is used not only for decoding kernel
instructions. It is also used by perf uprobes (user space probes) and by
perf tools Intel Processor Trace decoding. Consequently, it needs to
support instructions executed by user space also.
Opcode 0x68 PUSH instruction is currently defined as 64-bit operand size
only i.e. (d64). That was based on Intel SDM Opcode Map. However that is
contradicted by the Instruction Set Reference section for PUSH in the
same manual.
Remove 64-bit operand size only annotation from opcode 0x68 PUSH
instruction.
Example:
$ cat pushw.s
.global _start
.text
_start:
pushw $0x1234
mov $0x1,%eax # system call number (sys_exit)
int $0x80
$ as -o pushw.o pushw.s
$ ld -s -o pushw pushw.o
$ objdump -d pushw | tail -4
0000000000401000 <.text>:
401000: 66 68 34 12 pushw $0x1234
401004: b8 01 00 00 00 mov $0x1,%eax
401009: cd 80 int $0x80
$ perf record -e intel_pt//u ./pushw
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.014 MB perf.data ]
Before:
$ perf script --insn-trace=disasm
Warning:
1 instruction trace errors
pushw 10349 [000] 10586.869237014: 401000 [unknown] (/home/ahunter/git/misc/rtit-tests/pushw) pushw $0x1234
pushw 10349 [000] 10586.869237014: 401006 [unknown] (/home/ahunter/git/misc/rtit-tests/pushw) addb %al, (%rax)
pushw 10349 [000] 10586.869237014: 401008 [unknown] (/home/ahunter/git/misc/rtit-tests/pushw) addb %cl, %ch
pushw 10349 [000] 10586.869237014: 40100a [unknown] (/home/ahunter/git/misc/rtit-tests/pushw) addb $0x2e, (%rax)
instruction trace error type 1 time 10586.869237224 cpu 0 pid 10349 tid 10349 ip 0x40100d code 6: Trace doesn't match instruction
After:
$ perf script --insn-trace=disasm
pushw 10349 [000] 10586.869237014: 401000 [unknown] (./pushw) pushw $0x1234
pushw 10349 [000] 10586.869237014: 401004 [unknown] (./pushw) movl $1, %eax
Fixes: eb13296cfa ("x86: Instruction decoder API")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240502105853.5338-3-adrian.hunter@intel.com
The x86 instruction decoder needs to know these new instructions that
are going to be used in the crypto library as well as the x86 core
code. Add the following:
LOADIWKEY:
Load a CPU-internal wrapping key.
ENCODEKEY128:
Wrap a 128-bit AES key to a key handle.
ENCODEKEY256:
Wrap a 256-bit AES key to a key handle.
AESENC128KL:
Encrypt a 128-bit block of data using a 128-bit AES key
indicated by a key handle.
AESENC256KL:
Encrypt a 128-bit block of data using a 256-bit AES key
indicated by a key handle.
AESDEC128KL:
Decrypt a 128-bit block of data using a 128-bit AES key
indicated by a key handle.
AESDEC256KL:
Decrypt a 128-bit block of data using a 256-bit AES key
indicated by a key handle.
AESENCWIDE128KL:
Encrypt 8 128-bit blocks of data using a 128-bit AES key
indicated by a key handle.
AESENCWIDE256KL:
Encrypt 8 128-bit blocks of data using a 256-bit AES key
indicated by a key handle.
AESDECWIDE128KL:
Decrypt 8 128-bit blocks of data using a 128-bit AES key
indicated by a key handle.
AESDECWIDE256KL:
Decrypt 8 128-bit blocks of data using a 256-bit AES key
indicated by a key handle.
The detail can be found in Intel Software Developer Manual.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20240502105853.5338-2-adrian.hunter@intel.com
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for TASK_SIZE on rv64/NOMMU, to reflect the lack of user/kernel
separation
- A fix to avoid loading rv64/NOMMU kernel past the start of RAM
- A fix for RISCV_HWPROBE_EXT_ZVFHMIN on ilp32 to avoid signed integer
overflow in the bitmask
- The sud_test kselftest has been fixed to properly swizzle the syscall
number into the return register, which are not the same on RISC-V
- A fix for a build warning in the perf tools on rv32
- A fix for the CBO selftests, to avoid non-constants leaking into the
inline asm
- A pair of fixes for T-Head PBMT errata probing, which has been
renamed MAE by the vendor
* tag 'riscv-for-linus-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: selftests: cbo: Ensure asm operands match constraints, take 2
perf riscv: Fix the warning due to the incompatible type
riscv: T-Head: Test availability bit before enabling MAE errata
riscv: thead: Rename T-Head PBMT to MAE
selftests: sud_test: return correct emulated syscall value on RISC-V
riscv: hwprobe: fix invalid sign extension for RISCV_HWPROBE_EXT_ZVFHMIN
riscv: Fix loading 64-bit NOMMU kernels past the start of RAM
riscv: Fix TASK_SIZE on 64-bit NOMMU
Pull misc fixes from Andrew Morton:
"11 hotfixes. 8 are cc:stable and the remaining 3 (nice ratio!) address
post-6.8 issues or aren't considered suitable for backporting.
All except one of these are for MM. I see no particular theme - it's
singletons all over"
* tag 'mm-hotfixes-stable-2024-04-26-13-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/hugetlb: fix DEBUG_LOCKS_WARN_ON(1) when dissolve_free_hugetlb_folio()
selftests: mm: protection_keys: save/restore nr_hugepages value from launch script
stackdepot: respect __GFP_NOLOCKDEP allocation flag
hugetlb: check for anon_vma prior to folio allocation
mm: zswap: fix shrinker NULL crash with cgroup_disable=memory
mm: turn folio_test_hugetlb into a PageType
mm: support page_mapcount() on page_has_type() pages
mm: create FOLIO_FLAG_FALSE and FOLIO_TYPE_OPS macros
mm/hugetlb: fix missing hugetlb_lock for resv uncharge
selftests: mm: fix unused and uninitialized variable warning
selftests/harness: remove use of LINE_MAX
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and bluetooth.
Nothing major, regression fixes are mostly in drivers, two more of
those are flowing towards us thru various trees. I wish some of the
changes went into -rc5, we'll try to keep an eye on frequency of PRs
from sub-trees.
Also disproportional number of fixes for bugs added in v6.4, strange
coincidence.
Current release - regressions:
- igc: fix LED-related deadlock on driver unbind
- wifi: mac80211: small fixes to recent clean up of the connection
process
- Revert "wifi: iwlwifi: bump FW API to 90 for BZ/SC devices", kernel
doesn't have all the code to deal with that version, yet
- Bluetooth:
- set power_ctrl_enabled on NULL returned by gpiod_get_optional()
- qca: fix invalid device address check, again
- eth: ravb: fix registered interrupt names
Current release - new code bugs:
- wifi: mac80211: check EHT/TTLM action frame length
Previous releases - regressions:
- fix sk_memory_allocated_{add|sub} for architectures where
__this_cpu_{add|sub}* are not IRQ-safe
- dsa: mv88e6xx: fix link setup for 88E6250
Previous releases - always broken:
- ip: validate dev returned from __in_dev_get_rcu(), prevent possible
null-derefs in a few places
- switch number of for_each_rcu() loops using call_rcu() on the
iterator to for_each_safe()
- macsec: fix isolation of broadcast traffic in presence of offload
- vxlan: drop packets from invalid source address
- eth: mlxsw: trap and ACL programming fixes
- eth: bnxt: PCIe error recovery fixes, fix counting dropped packets
- Bluetooth:
- lots of fixes for the command submission rework from v6.4
- qca: fix NULL-deref on non-serdev suspend
Misc:
- tools: ynl: don't ignore errors in NLMSG_DONE messages"
* tag 'net-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().
net: b44: set pause params only when interface is up
tls: fix lockless read of strp->msg_ready in ->poll
dpll: fix dpll_pin_on_pin_register() for multiple parent pins
net: ravb: Fix registered interrupt names
octeontx2-af: fix the double free in rvu_npc_freemem()
net: ethernet: ti: am65-cpts: Fix PTPv1 message type on TX packets
ice: fix LAG and VF lock dependency in ice_reset_vf()
iavf: Fix TC config comparison with existing adapter TC config
i40e: Report MFS in decimal base instead of hex
i40e: Do not use WQ_MEM_RECLAIM flag for workqueue
net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()
net/mlx5e: Advertise mlx5 ethernet driver updates sk_buff md_dst for MACsec
macsec: Detect if Rx skb is macsec-related for offloading devices that update md_dst
ethernet: Add helper for assigning packet type when dest address does not match device address
macsec: Enable devices to advertise whether they update sk_buff md_dst during offloads
net: phy: dp83869: Fix MII mode failure
netfilter: nf_tables: honor table dormant flag from netdev release event path
eth: bnxt: fix counting packets discarded due to OOM and netpoll
igc: Fix LED-related deadlock on driver unbind
...
The save/restore of nr_hugepages was added to the test itself by using the
atexit() functionality. But it is broken as parent exits after creating
child. Hence calling the atexit() function early. That's not it. The
child exits after creating its child and so on.
The parent cannot wait to get the termination status for its children as
it'll keep on holding the resources until the new pkey allocation fails.
It is impossible to wait for exits of all the grand and great grand
children. Hence the restoring of nr_hugepages value from parent is wrong.
Let's save/restore the nr_hugepages settings in the launch script
instead of doing it in the test.
Link: https://lkml.kernel.org/r/20240419115027.3848958-1-usama.anjum@collabora.com
Fixes: c52eb6db7b ("selftests: mm: restore settings from only parent process")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reported-by: Joey Gouly <joey.gouly@arm.com>
Closes: https://lore.kernel.org/all/20240418125250.GA2941398@e124191.cambridge.arm.com
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, the sud_test expects the emulated syscall to return the
emulated syscall number. This assumption only works on architectures
were the syscall calling convention use the same register for syscall
number/syscall return value. This is not the case for RISC-V and thus
the return value must be also emulated using the provided ucontext.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20231206134438.473166-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Fix the warnings by initializing and marking the variable as unused.
I've caught the warnings by using clang.
split_huge_page_test.c:303:6: warning: variable 'dummy' set but not used [-Wunused-but-set-variable]
303 | int dummy;
| ^
split_huge_page_test.c:343:3: warning: variable 'dummy' is uninitialized when used here [-Wuninitialized]
343 | dummy += *(*addr + i);
| ^~~~~
split_huge_page_test.c:303:11: note: initialize the variable 'dummy' to silence this warning
303 | int dummy;
| ^
| = 0
2 warnings generated.
Link: https://lkml.kernel.org/r/20240416162658.3353622-1-usama.anjum@collabora.com
Fixes: fc4d182316 ("mm: huge_memory: enable debugfs to split huge pages to any order")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull kvm fixes from Paolo Bonzini:
"This is a bit on the large side, mostly due to two changes:
- Changes to disable some broken PMU virtualization (see below for
details under "x86 PMU")
- Clean up SVM's enter/exit assembly code so that it can be compiled
without OBJECT_FILES_NON_STANDARD. This fixes a warning "Unpatched
return thunk in use. This should not happen!" when running KVM
selftests.
Everything else is small bugfixes and selftest changes:
- Fix a mostly benign bug in the gfn_to_pfn_cache infrastructure
where KVM would allow userspace to refresh the cache with a bogus
GPA. The bug has existed for quite some time, but was exposed by a
new sanity check added in 6.9 (to ensure a cache is either
GPA-based or HVA-based).
- Drop an unused param from gfn_to_pfn_cache_invalidate_start() that
got left behind during a 6.9 cleanup.
- Fix a math goof in x86's hugepage logic for
KVM_SET_MEMORY_ATTRIBUTES that results in an array overflow
(detected by KASAN).
- Fix a bug where KVM incorrectly clears root_role.direct when
userspace sets guest CPUID.
- Fix a dirty logging bug in the where KVM fails to write-protect
SPTEs used by a nested guest, if KVM is using Page-Modification
Logging and the nested hypervisor is NOT using EPT.
x86 PMU:
- Drop support for virtualizing adaptive PEBS, as KVM's
implementation is architecturally broken without an obvious/easy
path forward, and because exposing adaptive PEBS can leak host LBRs
to the guest, i.e. can leak host kernel addresses to the guest.
- Set the enable bits for general purpose counters in
PERF_GLOBAL_CTRL at RESET time, as done by both Intel and AMD
processors.
- Disable LBR virtualization on CPUs that don't support LBR
callstacks, as KVM unconditionally uses
PERF_SAMPLE_BRANCH_CALL_STACK when creating the perf event, and
would fail on such CPUs.
Tests:
- Fix a flaw in the max_guest_memory selftest that results in it
exhausting the supply of ucall structures when run with more than
256 vCPUs.
- Mark KVM_MEM_READONLY as supported for RISC-V in
set_memory_region_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits)
KVM: Drop unused @may_block param from gfn_to_pfn_cache_invalidate_start()
KVM: selftests: Add coverage of EPT-disabled to vmx_dirty_log_test
KVM: x86/mmu: Fix and clarify comments about clearing D-bit vs. write-protecting
KVM: x86/mmu: Remove function comments above clear_dirty_{gfn_range,pt_masked}()
KVM: x86/mmu: Write-protect L2 SPTEs in TDP MMU when clearing dirty status
KVM: x86/mmu: Precisely invalidate MMU root_role during CPUID update
KVM: VMX: Disable LBR virtualization if the CPU doesn't support LBR callstacks
perf/x86/intel: Expose existence of callback support to KVM
KVM: VMX: Snapshot LBR capabilities during module initialization
KVM: x86/pmu: Do not mask LVTPC when handling a PMI on AMD platforms
KVM: x86: Snapshot if a vCPU's vendor model is AMD vs. Intel compatible
KVM: x86: Stop compiling vmenter.S with OBJECT_FILES_NON_STANDARD
KVM: SVM: Create a stack frame in __svm_sev_es_vcpu_run()
KVM: SVM: Save/restore args across SEV-ES VMRUN via host save area
KVM: SVM: Save/restore non-volatile GPRs in SEV-ES VMRUN via host save area
KVM: SVM: Clobber RAX instead of RBX when discarding spec_ctrl_intercepted
KVM: SVM: Drop 32-bit "support" from __svm_sev_es_vcpu_run()
KVM: SVM: Wrap __svm_sev_es_vcpu_run() with #ifdef CONFIG_KVM_AMD_SEV
KVM: SVM: Create a stack frame in __svm_vcpu_run() for unwinding
KVM: SVM: Remove a useless zeroing of allocated memory
...
Pull powerpc fixes from Michael Ellerman:
- Fix wireguard loading failure on pre-Power10 due to Power10 crypto
routines
- Fix papr-vpd selftest failure due to missing variable initialization
- Avoid unnecessary get/put in spapr_tce_platform_iommu_attach_dev()
Thanks to Geetika Moolchandani, Jason Gunthorpe, Michal Suchánek, Nathan
Lynch, and Shivaprasad G Bhat.
* tag 'powerpc-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc/papr-vpd: Fix missing variable initialization
powerpc/crypto/chacha-p10: Fix failure on non Power10
powerpc/iommu: Refactor spapr_tce_platform_iommu_attach_dev()
Pull perf tools fixes from Namhyung Kim:
"A random set of small bug fixes:
- Fix perf annotate TUI when used with data type profiling
- Work around BPF verifier about sighand lock checking
And a set of kernel header synchronization"
* tag 'perf-tools-fixes-for-v6.9-2024-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
tools/include: Sync arm64 asm/cputype.h with the kernel sources
tools/include: Sync asm-generic/bitops/fls.h with the kernel sources
tools/include: Sync x86 asm/msr-index.h with the kernel sources
tools/include: Sync x86 asm/irq_vectors.h with the kernel sources
tools/include: Sync x86 CPU feature headers with the kernel sources
tools/include: Sync uapi/sound/asound.h with the kernel sources
tools/include: Sync uapi/linux/kvm.h and asm/kvm.h with the kernel sources
tools/include: Sync uapi/linux/fs.h with the kernel sources
tools/include: Sync uapi/drm/i915_drm.h with the kernel sources
perf lock contention: Add a missing NULL check
perf annotate: Make sure to call symbol__annotate2() in TUI
Pull iommufd fixes from Jason Gunthorpe:
"Two fixes for the selftests:
- CONFIG_IOMMUFD_TEST needs CONFIG_IOMMUFD_DRIVER to work
- The kconfig fragment sshould include fault injection so the fault
injection test can work"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Add config needed for iommufd_fail_nth
iommufd: Add missing IOMMUFD_DRIVER kconfig for the selftest
Pull networking fixes from Jakub Kicinski:
"A little calmer than usual, probably just the timing of sub-tree PRs.
Including fixes from netfilter.
Current release - regressions:
- inet: bring NLM_DONE out to a separate recv() again, fix user space
which assumes multiple recv()s will happen and gets blocked forever
- drv: mlx5:
- restore mistakenly dropped parts in register devlink flow
- use channel mdev reference instead of global mdev instance for
coalescing
- acquire RTNL lock before RQs/SQs activation/deactivation
Previous releases - regressions:
- net: change maximum number of UDP segments to 128, fix virtio
compatibility with Windows peers
- usb: ax88179_178a: avoid writing the mac address before first
reading
Previous releases - always broken:
- sched: fix mirred deadlock on device recursion
- netfilter:
- br_netfilter: skip conntrack input hook for promisc packets
- fixes removal of duplicate elements in the pipapo set backend
- various fixes for abort paths and error handling
- af_unix: don't peek OOB data without MSG_OOB
- drv: flower: fix fragment flags handling in multiple drivers
- drv: ravb: fix jumbo frames and packet stats accounting
Misc:
- kselftest_harness: fix Clang warning about zero-length format
- tun: limit printing rate when illegal packet received by tun dev"
* tag 'net-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them
net: usb: ax88179_178a: avoid writing the mac address before first reading
net: ravb: Fix RX byte accounting for jumbo packets
net: ravb: Fix GbEth jumbo packet RX checksum handling
net: ravb: Allow RX loop to move past DMA mapping errors
net: ravb: Count packets instead of descriptors in R-Car RX path
net: ethernet: mtk_eth_soc: fix WED + wifi reset
net:usb:qmi_wwan: support Rolling modules
selftests: kselftest_harness: fix Clang warning about zero-length format
net/sched: Fix mirred deadlock on device recursion
netfilter: nf_tables: fix memleak in map from abort path
netfilter: nf_tables: restore set elements when delete set fails
netfilter: nf_tables: missing iterator type in lookup walk
s390/ism: Properly fix receive message buffer allocation
net: dsa: mt7530: fix port mirroring for MT7988 SoC switch
net: dsa: mt7530: fix mirroring frames received on local port
tun: limit printing rate when illegal packet received by tun dev
ice: Fix checking for unsupported keys on non-tunnel device
ice: tc: allow zero flags in parsing tc flower
ice: tc: check src_vsi in case of traffic from VF
...
On my new laptop with packages from nixos-unstable, gcc 12.3.0 produces
> lib/setup.c: In function ‘__test_msg’:
> lib/setup.c:20:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 20 | ksft_print_msg(buf);
> | ^~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_ok’:
> lib/setup.c:26:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 26 | ksft_test_result_pass(buf);
> | ^~~~~~~~~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_fail’:
> lib/setup.c:32:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 32 | ksft_test_result_fail(buf);
> | ^~~~~~~~~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_xfail’:
> lib/setup.c:38:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 38 | ksft_test_result_xfail(buf);
> | ^~~~~~~~~~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_error’:
> lib/setup.c:44:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 44 | ksft_test_result_error(buf);
> | ^~~~~~~~~~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_skip’:
> lib/setup.c:50:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 50 | ksft_test_result_skip(buf);
> | ^~~~~~~~~~~~~~~~~~~~~
> cc1: some warnings being treated as errors
As the buffer was already pre-printed into, print it as a string
rather than a format-string.
Fixes: cfbab37b3d ("selftests/net: Add TCP-AO library")
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On my new laptop with packages from nixos-unstable, gcc 12.3.0 produces:
> lib/proc.c: In function ‘netstat_read_type’:
> lib/proc.c:89:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 89 | if (fscanf(fnetstat, type->header_name) == EOF)
> | ^~
> cc1: some warnings being treated as errors
Here the selftests lib parses header name, while expectes non-space word
ending with a column.
Fixes: cfbab37b3d ("selftests/net: Add TCP-AO library")
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The structure is on the stack and has to be zero-initialized as
the kernel checks for:
> if (in.reserved != 0 || in.reserved2 != 0)
> return -EINVAL;
Fixes: b26660531c ("selftests/net: Add test for TCP-AO add setsockopt() command")
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, "active reset" cases are flaky, because select() is called
for 3 sockets, while only 2 are expected to receive RST.
The idea of the third socket was to get into request_sock_queue,
but the test mistakenly attempted to connect() after the listener
socket was shut down.
Repair this test, it's important to check the different kernel
code-paths for signing RST TCP-AO segments.
Fixes: c6df7b2361 ("selftests/net: Add TCP-AO RST test")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull kselftest fixes from Shuah Khan:
"A fix to kselftest harness to prevent infinite loop triggered in an
assert in FIXTURE_TEARDOWN and a fix to a problem seen in being able
to stop subsystem-enable tests when sched events are being traced"
* tag 'linux_kselftest-fixes-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/harness: Prevent infinite loop due to Assert in FIXTURE_TEARDOWN
selftests/ftrace: Limit length in subsystem-enable tests
The commit fc8b2a6194
("net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation")
adds check of potential number of UDP segments vs
UDP_MAX_SEGMENTS in linux/virtio_net.h.
After this change certification test of USO guest-to-guest
transmit on Windows driver for virtio-net device fails,
for example with packet size of ~64K and mss of 536 bytes.
In general the USO should not be more restrictive than TSO.
Indeed, in case of unreasonably small mss a lot of segments
can cause queue overflow and packet loss on the destination.
Limit of 128 segments is good for any practical purpose,
with minimal meaningful mss of 536 the maximal UDP packet will
be divided to ~120 segments.
The number of segments for UDP packets is validated vs
UDP_MAX_SEGMENTS also in udp.c (v4,v6), this does not affect
quest-to-guest path but does affect packets sent to host, for
example.
It is important to mention that UDP_MAX_SEGMENTS is kernel-only
define and not available to user mode socket applications.
In order to request MSS smaller than MTU the applications
just uses setsockopt with SOL_UDP and UDP_SEGMENT and there is
no limitations on socket API level.
Fixes: fc8b2a6194 ("net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation")
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Building with clang results in the following warning:
posix_timers.c:69:6: warning: absolute value function 'abs' given an
argument of type 'long long' but has parameter of type 'int' which may
cause truncation of value [-Wabsolute-value]
if (abs(diff - DELAY * USECS_PER_SEC) > USECS_PER_SEC / 2) {
^
So switch to using llabs() instead.
Fixes: 0bc4b0cf15 ("selftests: add basic posix timers selftests")
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410232637.4135564-3-jstultz@google.com
After commit 6d029c25b7 ("selftests/timers/posix_timers: Reimplement
check_timer_distribution()"), clang warns:
tools/testing/selftests/timers/../kselftest.h:398:6: warning: variable 'major' is used uninitialized whenever '||' condition is true [-Wsometimes-uninitialized]
398 | if (uname(&info) || sscanf(info.release, "%u.%u.", &major, &minor) != 2)
| ^~~~~~~~~~~~
tools/testing/selftests/timers/../kselftest.h:401:9: note: uninitialized use occurs here
401 | return major > min_major || (major == min_major && minor >= min_minor);
| ^~~~~
tools/testing/selftests/timers/../kselftest.h:398:6: note: remove the '||' if its condition is always false
398 | if (uname(&info) || sscanf(info.release, "%u.%u.", &major, &minor) != 2)
| ^~~~~~~~~~~~~~~
tools/testing/selftests/timers/../kselftest.h:395:20: note: initialize the variable 'major' to silence this warning
395 | unsigned int major, minor;
| ^
| = 0
This is a false positive because if uname() fails, ksft_exit_fail_msg()
will be called, which unconditionally calls exit(), a noreturn function.
However, clang does not know that ksft_exit_fail_msg() will call exit() at
the point in the pipeline that the warning is emitted because inlining has
not occurred, so it assumes control flow will resume normally after
ksft_exit_fail_msg() is called.
Make it clear to clang that all of the functions that call exit()
unconditionally in kselftest.h are noreturn transitively by marking them
explicitly with '__attribute__((__noreturn__))', which clears up the
warning above and any future warnings that may appear for the same reason.
Fixes: 6d029c25b7 ("selftests/timers/posix_timers: Reimplement check_timer_distribution()")
Reported-by: John Stultz <jstultz@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240411-mark-kselftest-exit-funcs-noreturn-v1-1-b027c948f586@kernel.org
Closes: https://lore.kernel.org/all/20240410232637.4135564-2-jstultz@google.com/
There's a new conflict between this commit pending in x86/cpu:
63edbaa48a x86/cpu/topology: Add support for the AMD 0x80000026 leaf
And these fixes in x86/urgent:
c064b536a8 x86/cpu/amd: Make the NODEID_MSR union actually work
1b3108f689 x86/cpu/amd: Make the CPUID 0x80000008 parser correct
Resolve them.
Conflicts:
arch/x86/kernel/cpu/topology_amd.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The test sets a hardware breakpoint and uses a BPF program to suppress the
side effects of a perf event sample, including I/O availability signals,
SIGTRAPs, and decrementing the event counter limit, if the IP matches the
expected value. Then the function with the breakpoint is executed multiple
times to test that all effects behave as expected.
Signed-off-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240412015019.7060-8-khuey@kylehuey.com
Pull cxl fixes from Dave Jiang:
- Fix index of Clear Event Record handles in cxl_clear_event_record()
- Fix use before init of map->reg_type in cxl_decode_regblock()
- Fix initialization of mbox_cmd.size_out in cxl_mem_get_records_log()
- Fix CXL path access_coordinate computation:
- Remove unneded check of iter in loop
- Fix of retrieving of access_coordinate in PCI topology walk
- Fix of incorrect region access_coordinate data calculation
- Consolidate of access_coordinates attached to downstream port
context
- Add check to validate access_coordinate validity to prevent
incorrect data being exposed via sysfs
* tag 'cxl-fixes-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Add checks to access_coordinate calculation to fail missing data
cxl: Consolidate dport access_coordinate ->hb_coord and ->sw_coord into ->coord
cxl: Fix incorrect region perf data calculation
cxl: Fix retrieving of access_coordinates in PCIe path
cxl: Remove checking of iter in cxl_endpoint_get_perf_coordinates()
cxl/core: Fix initialization of mbox_cmd.size_out in get event
cxl/core/regs: Fix usage of map->reg_type in cxl_decode_regblock() before assigned
cxl/mem: Fix for the index of Clear Event Record Handle
Pull hyperv fixes from Wei Liu:
- Some cosmetic changes (Erni Sri Satya Vennela, Li Zhijian)
- Introduce hv_numa_node_to_pxm_info() (Nuno Das Neves)
- Fix KVP daemon to handle IPv4 and IPv6 combination for keyfile format
(Shradha Gupta)
- Avoid freeing decrypted memory in a confidential VM (Rick Edgecombe
and Michael Kelley)
* tag 'hyperv-fixes-signed-20240411' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Don't free ring buffers that couldn't be re-encrypted
uio_hv_generic: Don't free decrypted memory
hv_netvsc: Don't free decrypted memory
Drivers: hv: vmbus: Track decrypted status in vmbus_gpadl
Drivers: hv: vmbus: Leak pages if set_memory_encrypted() fails
hv/hv_kvp_daemon: Handle IPv4 and Ipv6 combination for keyfile format
hv: vmbus: Convert sprintf() family to sysfs_emit() family
mshyperv: Introduce hv_numa_node_to_pxm_info()
x86/hyperv: Cosmetic changes for hv_apic.c
Extend vmx_dirty_log_test to include accesses made by L2 when EPT is
disabled.
This commit adds explicit coverage of a bug caught by syzkaller, where
the TDP MMU would clear D-bits instead of write-protecting SPTEs being
used to map an L2, which only happens when L1 does not enable EPT,
causing writes made by L2 to not be reflected in the dirty log when PML
is enabled:
$ ./vmx_dirty_log_test
Nested EPT: disabled
==== Test Assertion Failure ====
x86_64/vmx_dirty_log_test.c:151: test_bit(0, bmap)
pid=72052 tid=72052 errno=4 - Interrupted system call
(stack trace empty)
Page 0 incorrectly reported clean
Opportunistically replace the volatile casts with {READ,WRITE}_ONCE().
Link: https://lore.kernel.org/kvm/000000000000c6526f06137f18cc@google.com/
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20240315230541.1635322-5-dmatlack@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
