hwsim_virtio_rx_work() passes the virtqueue used-ring length reported by
the device straight to skb_put() on a fixed-size receive skb. A backend
reporting a length larger than the skb tailroom drives skb_put() past the
buffer end and hits skb_over_panic() -- a host-triggerable guest panic
(denial of service).
Clamp the length to the skb's available room before skb_put(). A
conforming device never reports more than the posted buffer size, so valid
frames are unaffected; a truncated over-report then fails the
length/header checks in hwsim_virtio_handle_cmd() and is dropped, so
truncating rather than dropping here cannot be turned into a parsing
problem.
Fixes: 5d44fe7c98 ("mac80211_hwsim: add frame transmission support over virtio")
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260620-b4-disp-474bee37-v1-1-1a4d37f3e2d4@proton.me
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Remove WIPHY_FLAG_SUPPORTS_5_10_MHZ and 5/10 MHz channel
width support. We contemplated this back in early 2023
and didn't do it yet, but nobody stepped up to maintain
it.
It's already _mostly_ dead code since it can really only
be used for AP and maybe IBSS and monitor, but not on a
client since there's no way to scan (and hasn't been in
a very long time, if ever), so the only thing that ever
could really happen with it was run syzbot and trip over
assumptions in the code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260529084502.080c5885f0b7.I77cc94485b523c3c006005b9233db13cd4e077b3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement TX and RX path handling for NAN Data Path (NDP) frames,
enabling data communication between NAN peers during scheduled
availability windows.
TX path:
- Select TX channel based on current time slot: use DW channel
during Discovery Windows, or FAW channel from local
schedule during Further Availability Windows.
- Verify peer availability before transmission by checking committed
DW schedule or FAW of the peer schedule.
RX path:
- Extend NAN receive filtering to handle NAN_DATA interface frames.
- Accept incoming frames during FAW slots when channel matches local
schedule.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260506064301.155252ebc72b.Ic210f6c095c6ff372941bc8c77ee9c8c37d0356c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add all the handling to do NAN synchronization on 2.4 GHz including
sending out beacons. With this, the mac80211_hwsim NAN device also works
when used in conjunction with an external medium simulation.
Note that the TSF sync is not ideal in case of an external medium
simulation. This is because the mactime for received frames needs to be
estimated and the simulation may not update the timestamp of beacons
to the actual time that the frame was transmitted.
The implementation has an initial short phase where it scans for
clusters. This facilitates cluster joining and avoids creating a new
cluster immediately, which would result in two cluster join
notifications. It does not scan otherwise and will only see another
cluster appearing if a discovery beacon happens to be sent during the
2.4 GHz discovery window (DW).
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260506064301.7d21c3cdc565.I98b6c15eadefd6d123658294ef1a0cd3c2ce3054@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Frames submitted on the NAN device interface should only be transmitted
during one of the discovery windows (DWs). It is assumed that software
submits frames from the DW end notifications for the next DW period.
Simulate this behaviour by checking that we are currently in a DW before
transmitting from ieee80211_hwsim_wake_tx_queue. As frames will be
queued up at the start of a DW, wake the management TX queue every time
a DW is started. Do so with a randomized offset just to avoid every
client transmitting at the same time.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260506064301.f3456f159655.Id6780e2f7f7cab03264299b7d696ba5b1269e451@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg says:
====================
A fairly big set of changes all over, notably with:
- cfg80211: new APIs for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
- mt76:
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- iwlwifi: UNII-9 and continuing UHR work
* tag 'wireless-next-2026-03-26' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (230 commits)
wifi: mac80211: ignore reserved bits in reconfiguration status
wifi: cfg80211: allow protected action frame TX for NAN
wifi: ieee80211: Add some missing NAN definitions
wifi: nl80211: Add a notification to notify NAN channel evacuation
wifi: nl80211: add NL80211_CMD_NAN_ULW_UPDATE notification
wifi: nl80211: allow reporting spurious NAN Data frames
wifi: cfg80211: allow ToDS=0/FromDS=0 data frames on NAN data interfaces
wifi: nl80211: define an API for configuring the NAN peer's schedule
wifi: nl80211: add support for NAN stations
wifi: cfg80211: separately store HT, VHT and HE capabilities for NAN
wifi: cfg80211: add support for NAN data interface
wifi: cfg80211: make sure NAN chandefs are valid
wifi: cfg80211: Add an API to configure local NAN schedule
wifi: mac80211: cleanup error path of ieee80211_do_open
wifi: mac80211: extract channel logic from link logic
wifi: iwlwifi: mld: set RX_FLAG_RADIOTAP_TLV_AT_END generically
wifi: iwlwifi: reduce the number of prints upon firmware crash
wifi: iwlwifi: fix the description of SESSION_PROTECTION_CMD
wifi: iwlwifi: mld: introduce iwl_mld_vif_fw_id_valid
wifi: iwlwifi: mld: block EMLSR during TDLS connections
...
====================
Link: https://patch.msgid.link/20260326152021.305959-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently we execute `SET_NETDEV_DEV(dev, &priv->lowerdev->dev)` for
the virt_wifi net devices. However, unregistering a virt_wifi device in
netdev_run_todo() can happen together with the device referenced by
SET_NETDEV_DEV().
It can result in use-after-free during the ethtool operations performed
on a virt_wifi device that is currently being unregistered. Such a net
device can have the `dev.parent` field pointing to the freed memory,
but ethnl_ops_begin() calls `pm_runtime_get_sync(dev->dev.parent)`.
Let's remove SET_NETDEV_DEV for virt_wifi to avoid bugs like this:
==================================================================
BUG: KASAN: slab-use-after-free in __pm_runtime_resume+0xe2/0xf0
Read of size 2 at addr ffff88810cfc46f8 by task pm/606
Call Trace:
<TASK>
dump_stack_lvl+0x4d/0x70
print_report+0x170/0x4f3
? __pfx__raw_spin_lock_irqsave+0x10/0x10
kasan_report+0xda/0x110
? __pm_runtime_resume+0xe2/0xf0
? __pm_runtime_resume+0xe2/0xf0
__pm_runtime_resume+0xe2/0xf0
ethnl_ops_begin+0x49/0x270
ethnl_set_features+0x23c/0xab0
? __pfx_ethnl_set_features+0x10/0x10
? kvm_sched_clock_read+0x11/0x20
? local_clock_noinstr+0xf/0xf0
? local_clock+0x10/0x30
? kasan_save_track+0x25/0x60
? __kasan_kmalloc+0x7f/0x90
? genl_family_rcv_msg_attrs_parse.isra.0+0x150/0x2c0
genl_family_rcv_msg_doit+0x1e7/0x2c0
? __pfx_genl_family_rcv_msg_doit+0x10/0x10
? __pfx_cred_has_capability.isra.0+0x10/0x10
? stack_trace_save+0x8e/0xc0
genl_rcv_msg+0x411/0x660
? __pfx_genl_rcv_msg+0x10/0x10
? __pfx_ethnl_set_features+0x10/0x10
netlink_rcv_skb+0x121/0x380
? __pfx_genl_rcv_msg+0x10/0x10
? __pfx_netlink_rcv_skb+0x10/0x10
? __pfx_down_read+0x10/0x10
genl_rcv+0x23/0x30
netlink_unicast+0x60f/0x830
? __pfx_netlink_unicast+0x10/0x10
? __pfx___alloc_skb+0x10/0x10
netlink_sendmsg+0x6ea/0xbc0
? __pfx_netlink_sendmsg+0x10/0x10
? __futex_queue+0x10b/0x1f0
____sys_sendmsg+0x7a2/0x950
? copy_msghdr_from_user+0x26b/0x430
? __pfx_____sys_sendmsg+0x10/0x10
? __pfx_copy_msghdr_from_user+0x10/0x10
___sys_sendmsg+0xf8/0x180
? __pfx____sys_sendmsg+0x10/0x10
? __pfx_futex_wait+0x10/0x10
? fdget+0x2e4/0x4a0
__sys_sendmsg+0x11f/0x1c0
? __pfx___sys_sendmsg+0x10/0x10
do_syscall_64+0xe2/0x570
? exc_page_fault+0x66/0xb0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This fix may be combined with another one in the ethtool subsystem:
https://lore.kernel.org/all/20260322075917.254874-1-alex.popov@linux.com/T/#u
Fixes: d43c65b05b ("ethtool: runtime-resume netdev parent in ethnl_ops_begin")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Popov <alex.popov@linux.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260324224607.374327-1-alex.popov@linux.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_tx_prepare_skb() has three error paths, but only two of them
free the skb. The first error path (ieee80211_tx_prepare() returning
TX_DROP) does not free it, while invoke_tx_handlers() failure and the
fragmentation check both do.
Add kfree_skb() to the first error path so all three are consistent,
and remove the now-redundant frees in callers (ath9k, mt76,
mac80211_hwsim) to avoid double-free.
Document the skb ownership guarantee in the function's kdoc.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20260314065455.2462900-1-nbd@nbd.name
Fixes: 06be6b149f ("mac80211: add ieee80211_tx_prepare_skb() helper function")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a debugfs 'simulate_incumbent_signal_interference' with custom
file_operations and a .write that accepts "<freq_mhz> <bitmap>". The
handler selects the 6 GHz chanctx whose primary 20 MHz center matches
<freq_mhz> and reports the event via cfg80211_incumbent_signal_notify().
The bitmap marks affected 20 MHz segments within the current chandef
(lowest bit = lowest segment)
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Signed-off-by: Amith A <amith.a@oss.qualcomm.com>
Link: https://patch.msgid.link/20260306060927.504567-2-amith.a@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Per IEEE Std 802.11be-2024, 12.5.2.3.3, if the MPDU is an
individually addressed Data frame between an AP MLD and a
non-AP MLD associated with the AP MLD, then A1/A2/A3
will be MLD MAC addresses. Otherwise, Al/A2/A3 will be
over-the-air link MAC addresses.
Currently, during AAD and Nonce computation for software based
encryption/decryption cases, mac80211 directly uses the addresses it
receives in the skb frame header. However, after the first
authentication, management frame addresses for non-AP MLD stations
are translated to MLD addresses from over the air link addresses in
software. This means that the skb header could contain translated MLD
addresses, which when used as is, can lead to incorrect AAD/Nonce
computation.
In the following manner, ensure that the right set of addresses are used:
In the receive path, stash the pre-translated link addresses in
ieee80211_rx_data and use them for the AAD/Nonce computations
when required.
In the transmit path, offload the encryption for a CCMP/GCMP key
to the hwsim driver that can then ensure that encryption and hence
the AAD/Nonce computations are performed on the frame containing the
right set of addresses, i.e, MLD addresses if unicast data frame and
link addresses otherwise.
To do so, register the set key handler in hwsim driver so mac80211 is
aware that it is the driver that would take care of encrypting the
frame. Offload encryption for a CCMP/GCMP key, while keeping the
encryption for WEP/TKIP and MMIE generation for a AES_CMAC or a
AES_GMAC key still at the SW crypto in mac layer
Co-developed-by: Rohan Dutta <quic_drohan@quicinc.com>
Signed-off-by: Rohan Dutta <quic_drohan@quicinc.com>
Signed-off-by: Sai Pratyusha Magam <sai.magam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260226042959.3766157-1-sai.magam@oss.qualcomm.com
[only store and apply link_addrs for unicast non-data
rather storing always and applying for !unicast_data]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
