power-domain is required for the sc7180 dispcc GDSC but not every qcom SoC
has a similar dependency for example the apq8064.
Most Qcom SoC's using mdss-dsi-ctrl seem to have the ability to
power-collapse the MDP without collapsing DSI.
For example the qcom vendor kernel commit for apq8084, msm8226, msm8916,
msm8974.
7b5c011a77
"ARM: dts: msm: add mdss gdsc supply to dsi controller device
It is possible for the DSI controller to be active when MDP is
power collapsed. DSI controller needs to have it's own vote for
mdss gdsc to ensure that gdsc remains on in such cases."
This however doesn't appear to be the case for the apq8064 so we shouldn't
be marking power-domain as required in yaml checks.
Fixes: 4dbe55c977 ("dt-bindings: msm: dsi: add yaml schemas for DSI bindings")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/515958/
Link: https://lore.kernel.org/r/20221223021025.1646636-3-bryan.odonoghue@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
drm-misc-next for v6.3:
UAPI Changes:
* connector: Support analog-TV mode property
* media: Add MEDIA_BUS_FMT_RGB565_1X24_CPADHI,
MEDIA_BUS_FMT_RGB666_1X18 and MEDIA_BUS_FMT_RGB666_1X24_CPADHI
Cross-subsystem Changes:
* dma-buf: Documentation fixes
* i2c: Introduce i2c_client_get_device_id() helper
Core Changes:
* Improve support for analog TV output
* bridge: Remove unused drm_bridge_chain functions
* debugfs: Add per-device helpers and convert various DRM drivers
* dp-mst: Various fixes
* fbdev emulation: Always pick 32 bpp as default
* KUnit: Add tests for managed helpers; Various cleanups
* panel-orientation: Add quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50
* TTM: Open-code ttm_bo_wait() and remove the helper
Driver Changes:
* Fix preferred depth and bpp values throughout DRM drivers
* Remove #CONFIG_PM guards throughout DRM drivers
* ast: Various fixes
* bridge: Implement i2c's probe_new in various drivers; Fixes; ite-it6505:
Locking fixes, Cache EDID data; ite-it66121: Support IT6610 chip,
Cleanups; lontium-tl9611: Fix HDMI on DragonBoard 845c; parade-ps8640:
Use atomic bridge functions
* gud: Convert to DRM shadow-plane helpers; Perform flushing synchronously
during atomic update
* ili9486: Support 16-bit pixel data
* imx: Split off IPUv3 driver; Various fixes
* mipi-dbi: Convert to DRM shadow-plane helpers plus rsp driver changes;i
Support separate I/O-voltage supply
* mxsfb: Depend on ARCH_MXS or ARCH_MXC
* omapdrm: Various fixes
* panel: Use ktime_get_boottime() to measure power-down delay in various
drivers; Fix auto-suspend delay in various drivers; orisetech-ota5601a:
Add support
* sprd: Cleanups
* sun4i: Convert to new TV-mode property
* tidss: Various fixes
* v3d: Various fixes
* vc4: Convert to new TV-mode property; Support Kunit tests; Cleanups;
dpi: Support RGB565 and RGB666 formats; dsi: Convert DSI driver to
bridge
* virtio: Improve tracing
* vkms: Support small cursors in IGT tests; Various fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y7QIwlfElAYWxRcR@linux-uq9g
There are 3 possible interrupt sources are handled by DP controller,
HPDstatus, Controller state changes and Aux read/write transaction.
At every irq, DP controller have to check isr status of every interrupt
sources and service the interrupt if its isr status bits shows interrupts
are pending. There is potential race condition may happen at current aux
isr handler implementation since it is always complete dp_aux_cmd_fifo_tx()
even irq is not for aux read or write transaction. This may cause aux read
transaction return premature if host aux data read is in the middle of
waiting for sink to complete transferring data to host while irq happen.
This will cause host's receiving buffer contains unexpected data. This
patch fixes this problem by checking aux isr and return immediately at
aux isr handler if there are no any isr status bits set.
Current there is a bug report regrading eDP edid corruption happen during
system booting up. After lengthy debugging to found that VIDEO_READY
interrupt was continuously firing during system booting up which cause
dp_aux_isr() to complete dp_aux_cmd_fifo_tx() prematurely to retrieve data
from aux hardware buffer which is not yet contains complete data transfer
from sink. This cause edid corruption.
Follows are the signature at kernel logs when problem happen,
EDID has corrupt header
panel-simple-dp-aux aux-aea0000.edp: Couldn't identify panel via EDID
Changes in v2:
-- do complete if (ret == IRQ_HANDLED) ay dp-aux_isr()
-- add more commit text
Changes in v3:
-- add Stephen suggested
-- dp_aux_isr() return IRQ_XXX back to caller
-- dp_ctrl_isr() return IRQ_XXX back to caller
Changes in v4:
-- split into two patches
Changes in v5:
-- delete empty line between tags
Changes in v6:
-- remove extra "that" and fixed line more than 75 char at commit text
Fixes: c943b4948b ("drm/msm/dp: add displayPort driver support")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/516121/
Link: https://lore.kernel.org/r/1672193785-11003-2-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
drm-misc-next for 6.2:
Cross-subsystem Changes:
- fbdev: Make fb_modesetting_disabled() static
- udmabuf: Add vmap and vunmap methods to udmabuf_ops
Core Changes:
- doc: make drm-uapi igt-tests more readable
- fb-helper: Revert of the damage worker removal
- fourcc: Add missing big-endian XRGB1555 and RGB565 formats
- gem-shmem: Fix for resource leakage in __drm_gem_shmem_create()
- scheduler: Fix lockup in drm_sched_entity_kill()
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221124074615.ahflw5q5ktfdsr7k@houat
The pixel data for the ILI9486 is always 16-bits wide and it must be
sent over the SPI bus. When the controller is only able to deal with
8-bit transfers, this 16-bits data needs to be swapped before the
sending to account for the big endian bus, this is on the contrary not
needed when the SPI controller already supports 16-bits transfers.
The decision about swapping the pixel data or not is taken in the MIPI
DBI code by probing the controller capabilities: if the controller only
suppors 8-bit transfers the data is swapped, otherwise it is not.
This swapping/non-swapping is relying on the assumption that when the
controller does support 16-bit transactions then the data is sent
unswapped in 16-bits-per-word over SPI.
The problem with the ILI9486 driver is that it is forcing 8-bit
transactions also for controllers supporting 16-bits, violating the
assumption and corrupting the pixel data.
Align the driver to what is done in the MIPI DBI code by adjusting the
transfer size to the maximum allowed by the SPI controller.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Reviewed-by: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221116-s905x_spi_ili9486-v4-2-f86b4463b9e4@baylibre.com
Pull perf fixes from Borislav Petkov:
- Pass only an initialized perf event attribute to the LSM hook
- Fix a use-after-free on the perf syscall's error path
- A potential integer overflow fix in amd_core_pmu_init()
- Fix the cgroup events tracking after the context handling rewrite
- Return the proper value from the inherit_event() function on error
* tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Call LSM hook after copying perf_event_attr
perf: Fix use-after-free in error path
perf/x86/amd: fix potential integer overflow on shift of a int
perf/core: Fix cgroup events tracking
perf core: Return error pointer if inherit_event() fails to find pmu_ctx
Pull x86 fixes from Borislav Petkov:
- Two fixes to correct how kprobes handles INT3 now that they're added
by other functionality like the rethunks and not only kgdb
- Remove __init section markings of two functions which are referenced
by a function in the .text section
* tag 'x86_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK
x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK
x86/calldepth: Fix incorrect init section references
Pull locking fixes from Borislav Petkov:
- Prevent the leaking of a debug timer in futex_waitv()
- A preempt-RT mutex locking fix, adding the proper acquire semantics
* tag 'locking_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Fix futex_waitv() hrtimer debug object leak on kcalloc error
rtmutex: Add acquire semantics for rtmutex lock acquisition slow path
Pull drm fixes from Daniel Vetter:
"I'm just back from the mountains, and Dave is out at the beach and
should be back in a week again. Just i915 fixes and since Rodrigo
bothered to make the pull last week I figured I should warm up gpg and
forward this in a nice signed tag as a new years present!
- i915 fixes for newer platforms
- i915 locking rework to not give up in vm eviction fallback path too
early"
* tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drm:
drm/i915/dsi: fix MIPI_BKLT_EN_1 native GPIO index
drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence
drm/i915/uc: Fix two issues with over-size firmware files
drm/i915: improve the catch-all evict to handle lock contention
drm/i915: Remove __maybe_unused from mtl_info
drm/i915: fix TLB invalidation for Gen12.50 video and compute engines
Pull Kbuild fixes from Masahiro Yamada:
- Fix broken BuildID
- Add srcrpm-pkg to the help message
- Fix the option order for modpost built with musl libc
- Fix the build dependency of rpm-pkg for openSUSE
* tag 'kbuild-fixes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
fixdep: remove unneeded <stdarg.h> inclusion
kbuild: sort single-targets alphabetically again
kbuild: rpm-pkg: add libelf-devel as alternative for BuildRequires
kbuild: Fix running modpost with musl libc
kbuild: add a missing line for help message
.gitignore: ignore *.rpm
arch: fix broken BuildID for arm64 and riscv
kconfig: Add static text for search information in help menu
Pull ata fix from Damien Le Moal:
"A single fix to address an issue with wake from suspend with PCS
adapters, from Adam"
* tag 'ata-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: ahci: Fix PCS quirk application for suspend
Pull ACPI fixes from Rafael Wysocki:
"These are new ACPI IRQ override quirks, low-power S0 idle (S0ix)
support adjustments and ACPI backlight handling fixes, mostly for
platforms using AMD chips.
Specifics:
- Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
Schumacher).
- Adjust ACPI video detection fallback path to prevent
non-operational ACPI backlight devices from being created on
systems where the native driver does not detect a suitable panel
(Mario Limonciello).
- Fix Apple GMUX backlight detection (Hans de Goede).
- Add a low-power S0 idle (S0ix) handling quirk for HP Elitebook 865
and stop using AMD-specific low-power S0 idle code path for systems
with Rembrandt chips and newer (Mario Limonciello)"
* tag 'acpi-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: x86: s2idle: Stop using AMD specific codepath for Rembrandt+
ACPI: x86: s2idle: Force AMD GUID/_REV 2 on HP Elitebook 865
ACPI: video: Fix Apple GMUX backlight detection
ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
ACPI: resource: do IRQ override on Lenovo 14ALC7
ACPI: resource: do IRQ override on XMG Core 15
ACPI: video: Don't enable fallback path for creating ACPI backlight by default
drm/amd/display: Report to ACPI video if no panels were found
ACPI: video: Allow GPU drivers to report no panels
Pull sound fixes from Takashi Iwai:
"Just a few small fixes:
- A regression fix for HDMI audio on HD-audio AMD codecs
- Fixes for LINE6 MIDI handling
- HD-audio quirk for Dell laptops"
* tag 'sound-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi: Static PCM mapping again with AMD HDMI codecs
ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops
ALSA: line6: fix stack overflow in line6_midi_transmit
ALSA: line6: correct midi status byte when receiving data from podxt
Merge ACPI resource handling quirks and ACPI backlight handling fixes
for 6.2-rc2:
- Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
Schumacher).
- Adjust ACPI video detection fallback path to prevent non-operational
ACPI backlight devices from being created on systems where the native
driver does not detect a suitable panel (Mario Limonciello).
- Fix Apple GMUX backlight detection (Hans de Goede).
* acpi-resource:
ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
ACPI: resource: do IRQ override on Lenovo 14ALC7
ACPI: resource: do IRQ override on XMG Core 15
* acpi-video:
ACPI: video: Fix Apple GMUX backlight detection
ACPI: video: Don't enable fallback path for creating ACPI backlight by default
drm/amd/display: Report to ACPI video if no panels were found
ACPI: video: Allow GPU drivers to report no panels
Starting from ICL, the default for MIPI GPIO sequences seems to be using
native GPIOs i.e. GPIOs available in the GPU. These native GPIOs reuse
many pins that quite frankly seem scary to poke based on the VBT
sequences. We pretty much have to trust that the board is configured
such that the relevant HPD, PP_CONTROL and GPIO bits aren't used for
anything else.
MIPI sequence v4 also adds a flag to fall back to non-native sequences.
v5:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock() in icp_irq_handler()
too (Ville)
- References instead of Closes issue 6131 because this does not fix everything
v4:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock_irq() (Ville)
v3:
- Fix -Wbitwise-conditional-parentheses (kernel test robot <lkp@intel.com>)
v2:
- Fix HPD pin output set (impacts GPIOs 0 and 5)
- Fix GPIO data output direction set (impacts GPIOs 4 and 9)
- Reduce register accesses to single intel_de_rwm()
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6131
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219105955.4014451-1-jani.nikula@intel.com
(cherry picked from commit f087cfe6fc)
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This is unneeded since commit 69304379ff ("fixdep: use fflush() and
ferror() to ensure successful write to files").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Guoqing Jiang reports that openSUSE cannot compile the kernel rpm due
to "BuildRequires: elfutils-libelf-devel" added by commit 8818039f95
("kbuild: add ability to make source rpm buildable using koji").
The relevant package name in openSUSE is libelf-devel.
Add it as an alternative package.
BTW, if it is impossible to solve the build requirement, the final
resort would be:
$ make RPMOPTS=--nodeps rpm-pkg
This passes --nodeps to the rpmbuild command so it will not verify
build dependencies. This is useful to test rpm builds on non-rpm
system. On Debian/Ubuntu, for example, you can install rpmbuild by
'apt-get install rpm'.
NOTE1:
Likewise, it is possible to bypass the build dependency check for
debian package builds:
$ make DPKG_FLAGS=-d deb-pkg
NOTE2:
The 'or' operator is supported since RPM 4.13. So, old distros such
as CentOS 7 will break. I suggest installing newer rpmbuild in such
cases.
Link: https://lore.kernel.org/linux-kbuild/ee227d24-9c94-bfa3-166a-4ee6b5dfea09@linux.dev/T/#u
Fixes: 8818039f95 ("kbuild: add ability to make source rpm buildable using koji")
Reported-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
commit 3d57e1b7b1 ("kbuild: refactor the prerequisites of the modpost
rule") moved 'vmlinux.o' inside modpost-args, possibly before some of
the other options. However, getopt() in musl libc follows POSIX and
stops looking for options upon reaching the first non-option argument.
As a result, the '-T' option is misinterpreted as a positional argument,
and the build fails:
make -f ./scripts/Makefile.modpost
scripts/mod/modpost -E -o Module.symvers vmlinux.o -T modules.order
-T: No such file or directory
make[1]: *** [scripts/Makefile.modpost:137: Module.symvers] Error 1
make: *** [Makefile:1960: modpost] Error 2
The fix is to move all options before 'vmlinux.o' in modpost-args.
Fixes: 3d57e1b7b1 ("kbuild: refactor the prerequisites of the modpost rule")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Previously, *.rpm files were created under $HOME/rpmbuild/, but since
commit 8818039f95 ("kbuild: add ability to make source rpm buildable
using koji"), srcrpm-pkg creates the source rpm in the kernel tree
because it sets '_srcrpmdir'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Dennis Gilmore reports that the BuildID is missing in the arm64 vmlinux
since commit 994b7ac169 ("arm64: remove special treatment for the
link order of head.o").
The issue is that the type of .notes section, which contains the BuildID,
changed from NOTES to PROGBITS.
Ard Biesheuvel figured out that whichever object gets linked first gets
to decide the type of a section. The PROGBITS type is the result of the
compiler emitting .note.GNU-stack as PROGBITS rather than NOTE.
While Ard provided a fix for arm64, I want to fix this globally because
the same issue is happening on riscv since commit 2348e6bf44 ("riscv:
remove special treatment for the link order of head.o"). This problem
will happen in general for other architectures if they start to drop
unneeded entries from scripts/head-object-list.txt.
Discard .note.GNU-stack in include/asm-generic/vmlinux.lds.h.
Link: https://lore.kernel.org/lkml/CAABkxwuQoz1CTbyb57n0ZX65eSYiTonFCU8-LCQc=74D=xE=rA@mail.gmail.com/
Fixes: 994b7ac169 ("arm64: remove special treatment for the link order of head.o")
Fixes: 2348e6bf44 ("riscv: remove special treatment for the link order of head.o")
Reported-by: Dennis Gilmore <dennis@ausil.us>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Pull block fixes from Jens Axboe:
"Mostly just NVMe, but also a single fixup for BFQ for a regression
that happened during the merge window. In detail:
- NVMe pull requests via Christoph:
- Fix doorbell buffer value endianness (Klaus Jensen)
- Fix Linux vs NVMe page size mismatch (Keith Busch)
- Fix a potential use memory access beyong the allocation limit
(Keith Busch)
- Fix a multipath vs blktrace NULL pointer dereference (Yanjun
Zhang)
- Fix various problems in handling the Command Supported and
Effects log (Christoph Hellwig)
- Don't allow unprivileged passthrough of commands that don't
transfer data but modify logical block content (Christoph
Hellwig)
- Add a features and quirks policy document (Christoph Hellwig)
- Fix some really nasty code that was correct but made smatch
complain (Sagi Grimberg)
- Use-after-free regression in BFQ from this merge window (Yu)"
* tag 'block-6.2-2022-12-29' of git://git.kernel.dk/linux:
nvme-auth: fix smatch warning complaints
nvme: consult the CSE log page for unprivileged passthrough
nvme: also return I/O command effects from nvme_command_effects
nvmet: don't defer passthrough commands with trivial effects to the workqueue
nvmet: set the LBCC bit for commands that modify data
nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding it
nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition
docs, nvme: add a feature and quirk policy document
nvme-pci: update sqsize when adjusting the queue depth
nvme: fix setting the queue depth in nvme_alloc_io_tag_set
block, bfq: fix uaf for bfqq in bfq_exit_icq_bfqq
nvme: fix multipath crash caused by flush request when blktrace is enabled
nvme-pci: fix page size checks
nvme-pci: fix mempool alloc size
nvme-pci: fix doorbell buffer value endianness
Pull io_uring fixes from Jens Axboe:
- Two fixes for mutex grabbing when the task state is != TASK_RUNNING
(me)
- Check for invalid opcode in io_uring_register() a bit earlier, to
avoid going through the quiesce machinery just to return -EINVAL
later in the process (me)
- Fix for the uapi io_uring header, skipping including time_types.h
when necessary (Stefan)
* tag 'io_uring-6.2-2022-12-29' of git://git.kernel.dk/linux:
uapi:io_uring.h: allow linux/time_types.h to be skipped
io_uring: check for valid register opcode earlier
io_uring/cancel: re-grab ctx mutex after finishing wait
io_uring: finish waiting before flushing overflow entries
Pull KUnit fix from Shuah Khan:
- alloc_string_stream_fragment() error path fix to free before
returning a failure.
* tag 'linux-kselftest-kunit-fixes-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: alloc_string_stream_fragment error handling bug fix
Pull kvm fixes from Paolo Bonzini:
"Changes that were posted too late for 6.1, or after the release.
x86:
- several fixes to nested VMX execution controls
- fixes and clarification to the documentation for Xen emulation
- do not unnecessarily release a pmu event with zero period
- MMU fixes
- fix Coverity warning in kvm_hv_flush_tlb()
selftests:
- fixes for the ucall mechanism in selftests
- other fixes mostly related to compilation with clang"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (41 commits)
KVM: selftests: restore special vmmcall code layout needed by the harness
Documentation: kvm: clarify SRCU locking order
KVM: x86: fix deadlock for KVM_XEN_EVTCHN_RESET
KVM: x86/xen: Documentation updates and clarifications
KVM: x86/xen: Add KVM_XEN_INVALID_GPA and KVM_XEN_INVALID_GFN to uapi
KVM: x86/xen: Simplify eventfd IOCTLs
KVM: x86/xen: Fix SRCU/RCU usage in readers of evtchn_ports
KVM: x86/xen: Use kvm_read_guest_virt() instead of open-coding it badly
KVM: x86/xen: Fix memory leak in kvm_xen_write_hypercall_page()
KVM: Delete extra block of "};" in the KVM API documentation
kvm: x86/mmu: Remove duplicated "be split" in spte.h
kvm: Remove the unused macro KVM_MMU_READ_{,UN}LOCK()
MAINTAINERS: adjust entry after renaming the vmx hyperv files
KVM: selftests: Mark correct page as mapped in virt_map()
KVM: arm64: selftests: Don't identity map the ucall MMIO hole
KVM: selftests: document the default implementation of vm_vaddr_populate_bitmap
KVM: selftests: Use magic value to signal ucall_alloc() failure
KVM: selftests: Disable "gnu-variable-sized-type-not-at-end" warning
KVM: selftests: Include lib.mk before consuming $(CC)
KVM: selftests: Explicitly disable builtins for mem*() overrides
...
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.2
- fix various problems in handling the Command Supported and Effects log
(Christoph Hellwig)
- don't allow unprivileged passthrough of commands that don't transfer
data but modify logical block content (Christoph Hellwig)
- add a features and quirks policy document (Christoph Hellwig)
- fix some really nasty code that was correct but made smatch complain
(Sagi Grimberg)"
* tag 'nvme-6.2-2022-12-29' of git://git.infradead.org/nvme:
nvme-auth: fix smatch warning complaints
nvme: consult the CSE log page for unprivileged passthrough
nvme: also return I/O command effects from nvme_command_effects
nvmet: don't defer passthrough commands with trivial effects to the workqueue
nvmet: set the LBCC bit for commands that modify data
nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding it
nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition
docs, nvme: add a feature and quirk policy document
Add few static text to explain how one can bring up the search dialog
box by pressing the forward slash key anywhere on this interface.
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When initializing auth context, there may be no secrets passed
by the user. Make return code explicit when returning successfully.
smatch warnings:
drivers/nvme/host/auth.c:950 nvme_auth_init_ctrl() warn: missing error code? 'ret'
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Commands like Write Zeros can change the contents of a namespaces without
actually transferring data. To protect against this, check the Commands
Supported and Effects log is supported by the controller for any
unprivileg command passthrough and refuse unprivileged passthrough if the
command has any effects that can change data or metadata.
Note: While the Commands Support and Effects log page has only been
mandatory since NVMe 2.0, it is widely supported because Windows requires
it for any command passthrough from userspace.
Fixes: e4fbcf32c8 ("nvme: identify-namespace without CAP_SYS_ADMIN")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
To be able to use the Commands Supported and Effects Log for allowing
unprivileged passtrough, it needs to be corretly reported for I/O
commands as well. Return the I/O command effects from
nvme_command_effects, and also add a default list of effects for the
NVM command set. For other command sets, the Commands Supported and
Effects log is required to be present already.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
