Remove the check that rejects sleepable BPF programs from doing
BPF_ANY/BPF_EXIST updates on local storage. This restriction was added
in commit b00fa38a9c ("bpf: Enable non-atomic allocations in local
storage") because kzalloc(GFP_KERNEL) could sleep inside
local_storage->lock. This is no longer a concern: all local storage
allocations now use kmalloc_nolock() which never sleeps.
In addition, since kmalloc_nolock() only accepts __GFP_ACCOUNT,
__GFP_ZERO and __GFP_NO_OBJ_EXT, the gfp_flags parameter plumbing from
bpf_*_storage_get() to bpf_local_storage_update() becomes dead code.
Remove gfp_flags from bpf_selem_alloc(), bpf_local_storage_alloc() and
bpf_local_storage_update(). Drop the hidden 5th argument from
bpf_*_storage_get helpers, and remove the verifier patching that
injected GFP_KERNEL/GFP_ATOMIC into the fifth argument.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20260411015419.114016-4-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Switch to kmalloc_nolock() universally in local storage. Socket local
storage didn't move to kmalloc_nolock() when BPF memory allocator was
replaced by it for performance reasons. Now that kfree_rcu() supports
freeing memory allocated by kmalloc_nolock(), we can move the remaining
local storages to use kmalloc_nolock() and cleanup the cluttered free
paths.
Use kfree() instead of kfree_nolock() in bpf_selem_free_trace_rcu() and
bpf_local_storage_free_trace_rcu(). Both callbacks run in process context
where spinning is allowed, so kfree_nolock() is unnecessary.
Benchmark:
./bench -p 1 local-storage-create --storage-type socket \
--batch-size {16,32,64}
The benchmark is a microbenchmark stress-testing how fast local storage
can be created. There is no measurable throughput change for socket local
storage after switching from kzalloc() to kmalloc_nolock().
Socket local storage
batch creation speed diff
--------------- ---- ------------------ ----
Baseline 16 433.9 ± 0.6 k/s
32 434.3 ± 1.4 k/s
64 434.2 ± 0.7 k/s
After 16 439.0 ± 1.9 k/s +1.2%
32 437.3 ± 2.0 k/s +0.7%
64 435.8 ± 2.5k/s +0.4%
Also worth noting that the baseline got a 5% throughput boost when sheaf
replaces percpu partial slab recently [0].
[0] https://lore.kernel.org/bpf/20260123-sheaves-for-all-v4-0-041323d506f7@suse.cz/
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/r/20260411015419.114016-3-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When regsafe() compares two scalar registers that both carry
BPF_ADD_CONST, check_scalar_ids() maps their full compound id
(aka base | BPF_ADD_CONST flag) as one idmap entry. However,
it never verifies that the underlying base ids, that is, with
the flag stripped are consistent with existing idmap mappings.
This allows construction of two verifier states where the old
state has R3 = R2 + 10 (both sharing base id A) while the current
state has R3 = R4 + 10 (base id C, unrelated to R2). The idmap
creates two independent entries: A->B (for R2) and A|flag->C|flag
(for R3), without catching that A->C conflicts with A->B. State
pruning then incorrectly succeeds.
Fix this by additionally verifying base ID mapping consistency
whenever BPF_ADD_CONST is set: after mapping the compound ids,
also invoke check_ids() on the base IDs (flag bits stripped).
This ensures that if A was already mapped to B from comparing
the source register, any ADD_CONST derivative must also derive
from B, not an unrelated C.
Fixes: 98d7ca374b ("bpf: Track delta between "linked" registers.")
Reported-by: STAR Labs SG <info@starlabs.sg>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260410232651.559778-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
As a sanity check poison stack slots that stack liveness determined
to be dead, so that any read from such slots will cause program rejection.
If stack liveness logic is incorrect the poison can cause
valid program to be rejected, but it also will prevent unsafe program
to be accepted.
Allow global subprogs "read" poisoned stack slots.
The static stack liveness determined that subprog doesn't read certain
stack slots, but sizeof(arg_type) based global subprog validation
isn't accurate enough to know which slots will actually be read by
the callee, so it needs to check full sizeof(arg_type) at the caller.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-14-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Rework func_instance identification and remove the dynamic liveness
API, completing the transition to fully static stack liveness analysis.
Replace callchain-based func_instance keys with (callsite, depth)
pairs. The full callchain (all ancestor callsites) is no longer part
of the hash key; only the immediate callsite and the call depth
matter. This does not lose precision in practice and simplifies the
data structure significantly: struct callchain is removed entirely,
func_instance stores just callsite, depth.
Drop must_write_acc propagation. Previously, must_write marks were
accumulated across successors and propagated to the caller via
propagate_to_outer_instance(). Instead, callee entry liveness
(live_before at subprog start) is pulled directly back to the
caller's callsite in analyze_subprog() after each callee returns.
Since (callsite, depth) instances are shared across different call
chains that invoke the same subprog at the same depth, must_write
marks from one call may be stale for another. To handle this,
analyze_subprog() records into a fresh_instance() when the instance
was already visited (must_write_initialized), then merge_instances()
combines the results: may_read is unioned, must_write is intersected.
This ensures only slots written on ALL paths through all call sites
are marked as guaranteed writes.
This replaces commit_stack_write_marks() logic.
Skip recursive descent into callees that receive no FP-derived
arguments (has_fp_args() check). This is needed because global
subprogram calls can push depth beyond MAX_CALL_FRAMES (max depth
is 64 for global calls but only 8 frames are accommodated for FP
passing). It also handles the case where a callback subprog cannot be
determined by argument tracking: such callbacks will be processed by
analyze_subprog() at depth 0 independently.
Update lookup_instance() (used by is_live_before queries) to search
for the func_instance with maximal depth at the corresponding
callsite, walking depth downward from frameno to 0. This accounts for
the fact that instance depth no longer corresponds 1:1 to
bpf_verifier_state->curframe, since skipped non-FP calls create gaps.
Remove the dynamic public liveness API from verifier.c:
- bpf_mark_stack_{read,write}(), bpf_reset/commit_stack_write_marks()
- bpf_update_live_stack(), bpf_reset_live_stack_callchain()
- All call sites in check_stack_{read,write}_fixed_off(),
check_stack_range_initialized(), mark_stack_slot_obj_read(),
mark/unmark_stack_slots_{dynptr,iter,irq_flag}()
- The per-instruction write mark accumulation in do_check()
- The bpf_update_live_stack() call in prepare_func_exit()
mark_stack_read() and mark_stack_write() become static functions in
liveness.c, called only from the static analysis pass. The
func_instance->updated and must_write_dropped flags are removed.
Remove spis_single_slot(), spis_one_bit() helpers from bpf_verifier.h
as they are no longer used.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Tested-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-9-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After arg tracking reaches a fixed point, perform a single linear scan
over the converged at_in[] state and translate each memory access into
liveness read/write masks on the func_instance:
- Load/store instructions: FP-derived pointer's frame and offset(s)
are converted to half-slot masks targeting
per_frame_masks->{may_read,must_write}
- Helper/kfunc calls: record_call_access() queries
bpf_helper_stack_access_bytes() / bpf_kfunc_stack_access_bytes()
for each FP-derived argument to determine access size and direction.
Unknown access size (S64_MIN) conservatively marks all slots from
fp_off to fp+0 as read.
- Imprecise pointers (frame == ARG_IMPRECISE): conservatively mark
all slots in every frame covered by the pointer's frame bitmask
as fully read.
- Static subprog calls with unresolved arguments: conservatively mark
all frames as fully read.
Instead of a call to clean_live_states(), start cleaning the current
state continuously as registers and stack become dead since the static
analysis provides complete liveness information. This makes
clean_live_states() and bpf_verifier_state->cleaned unnecessary.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-8-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The analysis is a basis for static liveness tracking mechanism
introduced by the next two commits.
A forward fixed-point analysis that tracks which frame's FP each
register value is derived from, and at what byte offset. This is
needed because a callee can receive a pointer to its caller's stack
frame (e.g. r1 = fp-16 at the call site), then do *(u64 *)(r1 + 0)
inside the callee — a cross-frame stack access that the callee's local
liveness must attribute to the caller's stack.
Each register holds an arg_track value from a three-level lattice:
- Precise {frame=N, off=[o1,o2,...]} — known frame index and
up to 4 concrete byte offsets
- Offset-imprecise {frame=N, off_cnt=0} — known frame, unknown offset
- Fully-imprecise {frame=ARG_IMPRECISE, mask=bitmask} — unknown frame,
mask says which frames might be involved
At CFG merge points the lattice moves toward imprecision (same
frame+offset stays precise, same frame different offsets merges offset
sets or becomes offset-imprecise, different frames become
fully-imprecise with OR'd bitmask).
The analysis also tracks spills/fills to the callee's own stack
(at_stack_in/out), so FP derived values spilled and reloaded.
This pass is run recursively per call site: when subprog A calls B
with specific FP-derived arguments, B is re-analyzed with those entry
args. The recursion follows analyze_subprog -> compute_subprog_args ->
(for each call insn) -> analyze_subprog. Subprogs that receive no
FP-derived args are skipped during recursion and analyzed
independently at depth 0.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-7-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move the `updated` check and reset from bpf_update_live_stack() into
update_instance() itself, so callers outside the main loop can reuse
it. Similarly, move write_insn_idx assignment out of
reset_stack_write_marks() into its public caller, and thread insn_idx
as a parameter to commit_stack_write_marks() instead of reading it
from liveness->write_insn_idx. Drop the unused `env` parameter from
alloc_frame_masks() and mark_stack_read().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-6-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Migrate clean_verifier_state() and its liveness queries from 8-byte
SPI granularity to 4-byte half-slot granularity.
In __clean_func_state(), each SPI is cleaned in two independent
halves:
- half_spi 2*i (lo): slot_type[0..3]
- half_spi 2*i+1 (hi): slot_type[4..7]
Slot types STACK_DYNPTR, STACK_ITER and STACK_IRQ_FLAG are never
cleaned, as their slot type markers are required by
destroy_if_dynptr_stack_slot(), is_iter_reg_valid_uninit() and
is_irq_flag_reg_valid_uninit() for correctness.
When only the hi half is dead, spilled_ptr metadata is destroyed and
the lo half's STACK_SPILL bytes are downgraded to STACK_MISC or
STACK_ZERO. When only the lo half is dead, spilled_ptr is preserved
because the hi half may still need it for state comparison.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-5-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Convert liveness bitmask type from u64 to spis_t, doubling the number
of trackable stack slots from 64 to 128 to support 4-byte granularity.
Each 8-byte SPI now maps to two consecutive 4-byte sub-slots in the
bitmask: spi*2 half and spi*2+1 half. In verifier.c,
check_stack_write_fixed_off() now reports 4-byte aligned writes of
4-byte writes as half-slot marks and 8-byte aligned 8-byte writes as
two slots. Similar logic applied in check_stack_read_fixed_off().
Queries (is_live_before) are not yet migrated to half-slot
granularity.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-4-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Subprogram name can be computed from function info and BTF, but it is
convenient to have the name readily available for logging purposes.
Update comment saying that bpf_subprog_info->start has to be the first
field, this is no longer true, relevant sites access .start field
by it's name.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260410-patch-set-v4-2-5d4eecb343db@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Holding the per-VMA lock across the BPF program body creates a lock
ordering problem when helpers acquire locks that depend on mmap_lock:
vm_lock -> i_rwsem -> mmap_lock -> vm_lock
Snapshot the VMA under the per-VMA lock in _next() via memcpy(), then
drop the lock before returning. The BPF program accesses only the
snapshot.
The verifier only trusts vm_mm and vm_file pointers (see
BTF_TYPE_SAFE_TRUSTED_OR_NULL in verifier.c). vm_file is reference-
counted with get_file() under the lock and released via fput() on the
next iteration or in _destroy(). vm_mm is already correct because
lock_vma_under_rcu() verifies vma->vm_mm == mm. All other pointers
are left as-is by memcpy() since the verifier treats them as untrusted.
Fixes: 4ac4546821 ("bpf: Introduce task_vma open-coded iterator kfuncs")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260408154539.3832150-4-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The open-coded task_vma iterator holds mmap_lock for the entire duration
of iteration, increasing contention on this highly contended lock.
Switch to per-VMA locking. Find the next VMA via an RCU-protected maple
tree walk and lock it with lock_vma_under_rcu(). lock_next_vma() is not
used because its fallback takes mmap_read_lock(), and the iterator must
work in non-sleepable contexts.
lock_vma_under_rcu() is a point lookup (mas_walk) that finds the VMA
containing a given address but cannot iterate across gaps. An
RCU-protected vma_next() walk (mas_find) first locates the next VMA's
vm_start to pass to lock_vma_under_rcu().
Between the RCU walk and the lock, the VMA may be removed, shrunk, or
write-locked. On failure, advance past it using vm_end from the RCU
walk. Because the VMA slab is SLAB_TYPESAFE_BY_RCU, vm_end may be
stale; fall back to PAGE_SIZE advancement when it does not make forward
progress. Concurrent VMA insertions at addresses already passed by the
iterator are not detected.
CONFIG_PER_VMA_LOCK is required; return -EOPNOTSUPP without it.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260408154539.3832150-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The open-coded task_vma iterator reads task->mm locklessly and acquires
mmap_read_trylock() but never calls mmget(). If the task exits
concurrently, the mm_struct can be freed as it is not
SLAB_TYPESAFE_BY_RCU, resulting in a use-after-free.
Safely read task->mm with a trylock on alloc_lock and acquire an mm
reference. Drop the reference via bpf_iter_mmput_async() in _destroy()
and error paths. bpf_iter_mmput_async() is a local wrapper around
mmput_async() with a fallback to mmput() on !CONFIG_MMU.
Reject irqs-disabled contexts (including NMI) up front. Operations used
by _next() and _destroy() (mmap_read_unlock, bpf_iter_mmput_async)
take spinlocks with IRQs disabled (pool->lock, pi_lock). Running from
NMI or from a tracepoint that fires with those locks held could
deadlock.
A trylock on alloc_lock is used instead of the blocking task_lock()
(get_task_mm) to avoid a deadlock when a softirq BPF program iterates
a task that already holds its alloc_lock on the same CPU.
Fixes: 4ac4546821 ("bpf: Introduce task_vma open-coded iterator kfuncs")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260408154539.3832150-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When querying info for an offloaded BPF map or program,
bpf_map_offload_info_fill_ns() and bpf_prog_offload_info_fill_ns()
obtain the network namespace with get_net(dev_net(offmap->netdev)).
However, the associated netdev's netns may be racing with teardown
during netns destruction. If the netns refcount has already reached 0,
get_net() performs a refcount_t increment on 0, triggering:
refcount_t: addition on 0; use-after-free.
Although rtnl_lock and bpf_devs_lock ensure the netdev pointer remains
valid, they cannot prevent the netns refcount from reaching zero.
Fix this by using maybe_get_net() instead of get_net(). maybe_get_net()
uses refcount_inc_not_zero() and returns NULL if the refcount is already
zero, which causes ns_get_path_cb() to fail and the caller to return
-ENOENT -- the correct behavior when the netns is being destroyed.
Fixes: 675fc275a3 ("bpf: offload: report device information for offloaded programs")
Fixes: 52775b33bb ("bpf: offload: report device information about offloaded maps")
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Closes: https://lore.kernel.org/bpf/f0aa3678-79c9-47ae-9e8c-02a3d1df160a@hust.edu.cn/
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260409023733.168050-1-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a pkt pointer acquires AT_PKT_END or BEYOND_PKT_END range from
a comparison, and then, known-constant arithmetic is performed,
adjust_ptr_min_max_vals() copies the stale range via dst_reg->raw =
ptr_reg->raw without clearing the negative reg->range sentinel values.
This lets is_pkt_ptr_branch_taken() choose one branch direction and
skip going through the other. Fix this by clearing negative pkt range
values (that is, AT_PKT_END and BEYOND_PKT_END) after arithmetic on
pkt pointers. This ensures is_pkt_ptr_branch_taken() returns unknown
and both branches are properly verified.
Fixes: 6d94e741a8 ("bpf: Support for pointers beyond pkt_end.")
Reported-by: STAR Labs SG <info@starlabs.sg>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260409155016.536608-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The local subprog pointer in create_jt() and visit_abnormal_return_insn()
was declared static.
It is unconditionally assigned via bpf_find_containing_subprog() before
every use. Thus, the static qualifier serves no purpose and rather creates
confusion. Just remove it.
Fixes: e40f5a6bf8 ("bpf: correct stack liveness for tail calls")
Fixes: 493d9e0d60 ("bpf, x86: add support for indirect jumps")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20260408191242.526279-3-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Usage of ld_{abs,ind} instructions got extended into subprogs some time
ago via commit 09b28d76ea ("bpf: Add abnormal return checks."). These
are only allowed in subprograms when the latter are BTF annotated and
have scalar return types.
The code generator in bpf_gen_ld_abs() has an abnormal exit path (r0=0 +
exit) from legacy cBPF times. While the enforcement is on scalar return
types, the verifier must also simulate the path of abnormal exit if the
packet data load via ld_{abs,ind} failed.
This is currently not the case. Fix it by having the verifier simulate
both success and failure paths, and extend it in similar ways as we do
for tail calls. The success path (r0=unknown, continue to next insn) is
pushed onto stack for later validation and the r0=0 and return to the
caller is done on the fall-through side.
Fixes: 09b28d76ea ("bpf: Add abnormal return checks.")
Reported-by: STAR Labs SG <info@starlabs.sg>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260408191242.526279-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The verifier currently does not allow overwriting a referenced dynptr's
stack slot to prevent resource leak. This is because referenced dynptr
holds additional resources that requires calling specific helpers to
release. This limitation can be relaxed when there are multiple copies
of the same dynptr. Whether it is the orignial dynptr or one of its
clones, as long as there exists at least one other dynptr with the same
ref_obj_id (to be used to release the reference), its stack slot should
be allowed to be overwritten.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260406150548.1354271-2-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a non-{add,sub} alu op such as xor is performed on a scalar
register that previously had a BPF_ADD_CONST delta, the else path
in adjust_reg_min_max_vals() only clears dst_reg->id but leaves
dst_reg->delta unchanged.
This stale delta can propagate via assign_scalar_id_before_mov()
when the register is later used in a mov. It gets a fresh id but
keeps the stale delta from the old (now-cleared) BPF_ADD_CONST.
This stale delta can later propagate leading to a verifier-vs-
runtime value mismatch.
The clear_id label already correctly clears both delta and id.
Make the else path consistent by also zeroing the delta when id
is cleared. More generally, this introduces a helper clear_scalar_id()
which internally takes care of zeroing. There are various other
locations in the verifier where only the id is cleared. By using
the helper we catch all current and future locations.
Fixes: 98d7ca374b ("bpf: Track delta between "linked" registers.")
Reported-by: STAR Labs SG <info@starlabs.sg>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260407192421.508817-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Consider the case of rX += rX where src_reg and dst_reg are pointers to
the same bpf_reg_state in adjust_reg_min_max_vals(). The latter first
modifies the dst_reg in-place, and later in the delta tracking, the
subsequent is_reg_const(src_reg)/reg_const_value(src_reg) reads the
post-{add,sub} value instead of the original source.
This is problematic since it sets an incorrect delta, which sync_linked_regs()
then propagates to linked registers, thus creating a verifier-vs-runtime
mismatch. Fix it by just skipping this corner case.
Fixes: 98d7ca374b ("bpf: Track delta between "linked" registers.")
Reported-by: STAR Labs SG <info@starlabs.sg>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260407192421.508817-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When an unqualified kprobe target exists in both vmlinux and a loaded
module, number_of_same_symbols() returns a count greater than 1,
causing kprobe attachment to fail with -EADDRNOTAVAIL even though the
vmlinux symbol is unambiguous.
When no module qualifier is given and the symbol is found in vmlinux,
return the vmlinux-only count without scanning loaded modules. This
preserves the existing behavior for all other cases:
- Symbol only in a module: vmlinux count is 0, falls through to module
scan as before.
- Symbol qualified with MOD:SYM: mod != NULL, unchanged path.
- Symbol ambiguous within vmlinux itself: count > 1 is returned as-is.
Fixes: 926fe783c8 ("tracing/kprobes: Fix symbol counting logic by looking at modules as well")
Fixes: 9d8616034f ("tracing/kprobes: Add symbol counting check when module loads")
Suggested-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Link: https://lore.kernel.org/r/20260407203912.1787502-2-andrey.grodzovsky@crowdstrike.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
RCU Tasks Trace grace period implies RCU grace period, and this
guarantee is expected to remain in the future. Only BPF is the user of
this predicate, hence retire the API and clean up all in-tree users.
RCU Tasks Trace is now implemented on SRCU-fast and its grace period
mechanism always has at least one call to synchronize_rcu() as it is
required for SRCU-fast's correctness (it replaces the smp_mb() that
SRCU-fast readers skip). So, RCU-tt GP will always imply RCU GP.
Reviewed-by: Puranjay Mohan <puranjay@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260407162234.785270-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Apparently, struct bpf_empty_prog_array exists entirely to populate a
single element of "items" in a global variable. "null_prog" is only
used during the initializer.
None of this is needed; globals will be correctly sized with an array
initializer of a flexible-array member.
So, remove struct bpf_empty_prog_array and adjust the rest of the code,
accordingly.
With these changes, fix the following warnings:
./include/linux/bpf.h:2369:31: warning: structure containing a flexible
array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/acr7Whmn0br3xeBP@kspp
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow accessing PTR_TO_CTX with variable offsets in syscall programs.
Fixed offsets are already enabled for all program types that do not
convert their ctx accesses, since the changes we made in the commit
de6c7d99f8 ("bpf: Relax fixed offset check for PTR_TO_CTX"). Note
that we also lift the restriction on passing syscall context into
helpers, which was not permitted before, and passing modified syscall
context into kfuncs.
The structure of check_mem_access can be mostly shared and preserved,
but we must use check_mem_region_access to correctly verify access with
variable offsets.
The check made in check_helper_mem_access is hardened to only allow
PTR_TO_CTX for syscall programs to be passed in as helper memory. This
was the original intention of the existing code anyway, and it makes
little sense for other program types' context to be utilized as a memory
buffer. In case a convincing example presents itself in the future, this
check can be relaxed further.
We also no longer use the last-byte access to simulate helper memory
access, but instead go through check_mem_region_access. Since this no
longer updates our max_ctx_offset, we must do so manually, to keep track
of the maximum offset at which the program ctx may be accessed.
Take care to ensure that when arg_type is ARG_PTR_TO_CTX, we do not
relax any fixed or variable offset constraints around PTR_TO_CTX even in
syscall programs, and require them to be passed unmodified. There are
several reasons why this is necessary. First, if we pass a modified ctx,
then the global subprog's accesses will not update the max_ctx_offset to
its true maximum offset, and can lead to out of bounds accesses. Second,
tail called program (or extension program replacing global subprog) where
their max_ctx_offset exceeds the program they are being called from can
also cause issues. For the latter, unmodified PTR_TO_CTX is the first
requirement for the fix, the second is ensuring max_ctx_offset >= the
program they are being called from, which has to be a separate change
not made in this commit.
All in all, we can hint using arg_type when we expect ARG_PTR_TO_CTX and
make our relaxation around offsets conditional on it.
Drop coverage of syscall tests from verifier_ctx.c temporarily for
negative cases until they are updated in subsequent commits.
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260406194403.1649608-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a dev-bound-only BPF program (BPF_F_XDP_DEV_BOUND_ONLY) undergoes
JIT compilation with constant blinding enabled (bpf_jit_harden >= 2),
bpf_jit_blind_constants() clones the program. The original prog is then
freed in bpf_jit_prog_release_other(), which updates aux->prog to point
to the surviving clone, but fails to update offload->prog.
This leaves offload->prog pointing to the freed original program. When
the network namespace is subsequently destroyed, cleanup_net() triggers
bpf_dev_bound_netdev_unregister(), which iterates ondev->progs and calls
__bpf_prog_offload_destroy(offload->prog). Accessing the freed prog
causes a page fault:
BUG: unable to handle page fault for address: ffffc900085f1038
Workqueue: netns cleanup_net
RIP: 0010:__bpf_prog_offload_destroy+0xc/0x80
Call Trace:
__bpf_offload_dev_netdev_unregister+0x257/0x350
bpf_dev_bound_netdev_unregister+0x4a/0x90
unregister_netdevice_many_notify+0x2a2/0x660
...
cleanup_net+0x21a/0x320
The test sequence that triggers this reliably is:
1. Set net.core.bpf_jit_harden=2 (echo 2 > /proc/sys/net/core/bpf_jit_harden)
2. Run xdp_metadata selftest, which creates a dev-bound-only XDP
program on a veth inside a netns (./test_progs -t xdp_metadata)
3. cleanup_net -> page fault in __bpf_prog_offload_destroy
Dev-bound-only programs are unique in that they have an offload structure
but go through the normal JIT path instead of bpf_prog_offload_compile().
This means they are subject to constant blinding's prog clone-and-replace,
while also having offload->prog that must stay in sync.
Fix this by updating offload->prog in bpf_jit_prog_release_other(),
alongside the existing aux->prog update. Both are back-pointers to
the prog that must be kept in sync when the prog is replaced.
Fixes: 2b3486bc2d ("bpf: Introduce device-bound XDP programs")
Signed-off-by: MingTao Huang <mintaohuang@tencent.com>
Link: https://lore.kernel.org/r/tencent_BCF692F45859CCE6C22B7B0B64827947D406@qq.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
list_next_entry() never returns NULL -- when the current element is the
last entry it wraps to the list head via container_of(). The subsequent
NULL check is therefore dead code and get_next_key() never returns
-ENOENT for the last element, instead reading storage->key from a bogus
pointer that aliases internal map fields and copying the result to
userspace.
Replace it with list_entry_is_head() so the function correctly returns
-ENOENT when there are no more entries.
Fixes: de9cbbaadb ("bpf: introduce cgroup storage maps")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Sun Jian <sun.jian.kdev@gmail.com>
Acked-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/20260403132951.43533-2-bestswngs@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a BPF_F_LOCK update races with a concurrent delete, the freed
element can be immediately recycled by alloc_htab_elem(). The fast path
in htab_map_update_elem() performs a lockless lookup and then calls
copy_map_value_locked() under the element's spin_lock. If
alloc_htab_elem() recycles the same memory, it overwrites the value
with plain copy_map_value(), without taking the spin_lock, causing
torn writes.
Use copy_map_value_locked() when BPF_F_LOCK is set so the new element's
value is written under the embedded spin_lock, serializing against any
stale lock holders.
Fixes: 96049f3afd ("bpf: introduce BPF_F_LOCK flag")
Reported-by: Aaron Esau <aaron1esau@gmail.com>
Closes: https://lore.kernel.org/all/CADucPGRvSRpkneb94dPP08YkOHgNgBnskTK6myUag_Mkjimihg@mail.gmail.com/
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260401-bpf_map_torn_writes-v1-1-782d071c55e7@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The static stack liveness analysis needs to know how many bytes a
helper or kfunc accesses through a stack pointer argument, so it can
precisely mark the affected stack slots as stack 'def' or 'use'.
Add bpf_helper_stack_access_bytes() and bpf_kfunc_stack_access_bytes()
which resolve the access size for a given call argument.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260403024422.87231-7-alexei.starovoitov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add two passes before the main verifier pass:
bpf_compute_const_regs() is a forward dataflow analysis that tracks
register values in R0-R9 across the program using fixed-point
iteration in reverse postorder. Each register is tracked with
a six-state lattice:
UNVISITED -> CONST(val) / MAP_PTR(map_index) /
MAP_VALUE(map_index, offset) / SUBPROG(num) -> UNKNOWN
At merge points, if two paths produce the same state and value for
a register, it stays; otherwise it becomes UNKNOWN.
The analysis handles:
- MOV, ADD, SUB, AND with immediate or register operands
- LD_IMM64 for plain constants, map FDs, map values, and subprogs
- LDX from read-only maps: constant-folds the load by reading the
map value directly via bpf_map_direct_read()
Results that fit in 32 bits are stored per-instruction in
insn_aux_data and bitmasks.
bpf_prune_dead_branches() uses the computed constants to evaluate
conditional branches. When both operands of a conditional jump are
known constants, the branch outcome is determined statically and the
instruction is rewritten to an unconditional jump.
The CFG postorder is then recomputed to reflect new control flow.
This eliminates dead edges so that subsequent liveness analysis
doesn't propagate through dead code.
Also add runtime sanity check to validate that precomputed
constants match the verifier's tracked state.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260403024422.87231-5-alexei.starovoitov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a pass that sorts subprogs in topological order so that iterating
subprog_topo_order[] walks leaf subprogs first, then their callers.
This is computed as a DFS post-order traversal of the CFG.
The pass runs after check_cfg() to ensure the CFG has been validated
before traversing and after postorder has been computed to avoid
walking dead code.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260403024422.87231-3-alexei.starovoitov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull bpf fixes from Alexei Starovoitov:
- Fix register equivalence for pointers to packet (Alexei Starovoitov)
- Fix incorrect pruning due to atomic fetch precision tracking (Daniel
Borkmann)
- Fix grace period wait for bpf_link-ed tracepoints (Kumar Kartikeya
Dwivedi)
- Fix use-after-free of sockmap's sk->sk_socket (Kuniyuki Iwashima)
- Reject direct access to nullable PTR_TO_BUF pointers (Qi Tang)
- Reject sleepable kprobe_multi programs at attach time (Varun R
Mallya)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add more precision tracking tests for atomics
bpf: Fix incorrect pruning due to atomic fetch precision tracking
bpf: Reject sleepable kprobe_multi programs at attach time
bpf: reject direct access to nullable PTR_TO_BUF pointers
bpf: sockmap: Fix use-after-free of sk->sk_socket in sk_psock_verdict_data_ready().
bpf: Fix grace period wait for tracepoint bpf_link
bpf: Fix regsafe() for pointers to packet
This patch fixes the invariant violations that can happen after we
refine ranges & tnum based on an incorrectly-detected branch condition.
For example, the branch is always true, but we miss it in
is_branch_taken; we then refine based on the branch being false and end
up with incoherent ranges (e.g. umax < umin).
To avoid this, we can simulate the refinement on both branches. More
specifically, this patch simulates both branches taken using
regs_refine_cond_op and reg_bounds_sync. If the resulting register
states are ill-formed on one of the branches, is_branch_taken can mark
that branch as "never taken".
On a more formal note, we can deduce a branch is not taken when
regs_refine_cond_op or reg_bounds_sync returns an ill-formed state
because the branch operators are sound (verified with Agni [1]).
Soundness means that the verifier is guaranteed to produce sound
outputs on the taken branches. On the non-taken branch (explored
because of imprecision in the bounds), the verifier is free to produce
any output. We use ill-formedness as a signal that the branch is dead
and prune that branch.
This patch moves the refinement logic for both branches from
reg_set_min_max to their own function, simulate_both_branches_taken,
which is called from is_scalar_branch_taken. As a result,
reg_set_min_max now only runs sanity checks and has been renamed to
reg_bounds_sanity_check_branches to reflect that.
We have had five patches fixing specific cases of invariant violations
in the past, all added with selftests:
- commit fbc7aef517 ("bpf: Fix u32/s32 bounds when ranges cross
min/max boundary")
- commit efc11a6678 ("bpf: Improve bounds when tnum has a single
possible value")
- commit f41345f47f ("bpf: Use tnums for JEQ/JNE is_branch_taken
logic")
- commit 00bf8d0c6c ("bpf: Improve bounds when s64 crosses sign
boundary")
- commit 6279846b9b ("bpf: Forget ranges when refining tnum after
JSET")
To confirm that this patch addresses all invariant violations, we have
also reverted those five commits and verified that their related
selftests don't cause any invariant violation warnings anymore. Those
selftests still fail but only because of misdetected branches or
less-precise bounds than expected. This demonstrates that the current
patch is enough to avoid the invariant violation warning AND that the
previous five patches are still useful to improve branch detection.
In addition to the selftests, this change was also tested with the
Cilium complexity test suite: all programs were successfully loaded and
it didn't change the number of processed instructions.
Link: https://github.com/bpfverif/agni [1]
Reported-by: syzbot+c950cc277150935cc0b5@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c950cc277150935cc0b5
Co-developed-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Co-developed-by: Srinivas Narayana <srinivas.narayana@rutgers.edu>
Signed-off-by: Srinivas Narayana <srinivas.narayana@rutgers.edu>
Co-developed-by: Santosh Nagarakatte <santosh.nagarakatte@rutgers.edu>
Signed-off-by: Santosh Nagarakatte <santosh.nagarakatte@rutgers.edu>
Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/a166b54a3cbbbdbcdf8a87f53045f1097176218b.1775142354.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In the subsequent commit, to prune dead branches we will rely on
detecting ill-formed ranges using range_bounds_violations()
(e.g., umin > umax) after refining register bounds using
regs_refine_cond_op().
However, reg_bounds_sync() can sometimes "repair" ill-formed bounds,
potentially masking a violation that was produced by
regs_refine_cond_op().
This commit modifies reg_bounds_sync() to exit early if an invariant
violation is already present in the input.
This ensures ill-formed reg_states remain ill-formed after
reg_bounds_sync(), allowing simulate_both_branches_taken() to correctly
identify dead branches with a single check to range_bounds_violation().
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/73127d628841c59cb7423d6bdcd204bf90bcdc80.1775142354.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In a subsequent patch, the regs_refine_cond_op and reg_bounds_sync
functions will be called in is_branch_taken instead of reg_set_min_max,
to simulate each branch's outcome. Since they will run before we branch
out, these two functions will need to work on temporary registers for
the two branches.
This refactoring patch prepares for that change, by introducing the
temporary registers on bpf_verifier_env and using them in
reg_set_min_max.
This change also allows us to save one fake_reg slot as we don't need to
allocate an additional temporary buffer in case of a BPF_K condition.
Finally, you may notice that this patch removes the check for
"false_reg1 == false_reg2" in reg_set_min_max. That check was introduced
in commit d43ad9da80 ("bpf: Skip bounds adjustment for conditional
jumps on same scalar register") to avoid an invariant violation. Given
that "env->false_reg1 == env->false_reg2" doesn't make sense and
invariant violations are addressed in a subsequent commit, this patch
just removes the check.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Co-developed-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/260b0270052944a420e1c56e6a92df4d43cadf03.1775142354.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
