Pull timer doc fixes from Ingo Molnar:
- Fix various DocBook formatting errors in kernel/time/ that generated
(justified) warnings during a kernel-doc build.
* tag 'timers-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Fix various kernel-doc problems
Pull perf events hw enablement from Ingo Molnar:
- More hardware-enablement for Intel Meteor Lake & Emerald Rapid
systems: pure model ID enumeration additions that do not affect other
systems.
* tag 'perf-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add Emerald Rapids
perf/x86/msr: Add Emerald Rapids
perf/x86/msr: Add Meteor Lake support
perf/x86/cstate: Add Meteor Lake support
Pull scheduler fixes from Ingo Molnar:
- Fix scheduler frequency invariance bug related to overly long
tickless periods triggering an integer overflow and disabling the
feature.
- Fix use-after-free bug in dup_user_cpus_ptr().
- Fix do_set_cpus_allowed() deadlock scenarios related to calling
kfree() with the pi_lock held. NOTE: the rcu_free() is the 'lazy'
solution here - we looked at patches to free the structure after the
pi_lock got dropped, but that looked quite a bit messier - and none
of this is truly performance critical. We can revisit this if it's
too lazy of a solution ...
* tag 'sched-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Use kfree_rcu() in do_set_cpus_allowed()
sched/core: Fix use-after-free bug in dup_user_cpus_ptr()
sched/core: Fix arch_scale_freq_tick() on tickless systems
Pull objtool fix from Ingo Molnar:
- Fix objtool to be more permissive with hand-written assembly that
uses non-function symbols in executable sections.
* tag 'core-urgent-2023-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Tolerate STT_NOTYPE symbols at end of section
Pull nolibc fixes from Paul McKenney:
- The fd_set structure was incorrectly defined as arrays of u32 instead
of long, which breaks BE64. Fix courtesy of Sven Schnelle.
- S_ISxxx macros were incorrectly testing the bits after applying them
instead of bitwise ANDing S_FMT with the value. Fix from Warner Losh.
- The mips code was randomly broken due to an unprotected "noreorder"
directive in the _start code that could prevent the assembler from
filling delayed slots. This in turn resulted in random other
instructions being placed into those slots. Fix courtesy of Willy
Tarreau.
- The current nolibc header layout refrains from including files that
are not explicitly included by the code using nolibc. Unfortunately,
this causes build failures when such files contain definitions that
are used (for example) by libgcc. Example definitions include raise()
and memset(), which are called by some architectures, but only at
certain optimization levels. Fix courtesy of Willy Tarreau.
- gcc 11.3 in ARM thumb2 mode at -O2 recognized a memset() construction
inside the memset() definition. The compiler replaced this
construction with a call to... memset(). Userland cannot be forced to
build with -ffreestanding, so an empty asm() statement was introduced
into the loop the loop in order to prevent the compiler from making
this unproductive transformation. Fix courtesy of Willy Tarreau.
- Most of the O_* macros were wrong on RISCV because their octal values
were coded as hexadecimal. This resulted in the getdents64() selftest
failing. Fix courtesy of Willy Tarreau.
This was tested on x86_64, i386, armv5, armv7, thumb1, thumb2, mips and
riscv, all at -O0, -Os and -O3.
* tag 'urgent-nolibc.2023.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/nolibc: fix the O_* fcntl/open macro definitions for riscv
tools/nolibc: prevent gcc from making memset() loop over itself
tools/nolibc: fix missing includes causing build issues at -O0
tools/nolibc: restore mips branch ordering in the _start block
tools/nolibc: Fix S_ISxxx macros
nolibc: fix fd_set type
We are missing a ) when we attempt to complain about not having enough
configuration for clang, resulting in the rather inscrutable error:
../lib.mk:23: *** unterminated call to function 'error': missing ')'. Stop.
Add the required ) so we print the message we were trying to print.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
acpi_get_and_request_gpiod() does not take a gpio_lookup_flags argument
specifying that the pins direction should be initialized to a specific
value.
This means that in some cases the pins might be left in input mode, causing
the gpiod_set() calls made to enable the clk / regulator to not work.
One example of this problem is the clk-enable GPIO for the ov01a1s sensor
on a Dell Latitude 9420 being left in input mode causing the clk to
never get enabled.
Explicitly set the direction of the pins to output to fix this.
Fixes: 5de691bffe ("platform/x86: Add intel_skl_int3472 driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20230111201426.947853-1-hdegoede@redhat.com
Commit fb541ca4c3 ("md: remove lock_bdev / unlock_bdev") removes
wrappers for blkdev_get/blkdev_put. However, the uninitialized local
static variable of pointer type 'claim_rdev' in md_import_device()
is NULL, which leads to the following warning call trace:
WARNING: CPU: 22 PID: 1037 at block/bdev.c:577 bd_prepare_to_claim+0x131/0x150
CPU: 22 PID: 1037 Comm: mdadm Not tainted 6.2.0-rc3+ #69
..
RIP: 0010:bd_prepare_to_claim+0x131/0x150
..
Call Trace:
<TASK>
? _raw_spin_unlock+0x15/0x30
? iput+0x6a/0x220
blkdev_get_by_dev.part.0+0x4b/0x300
md_import_device+0x126/0x1d0
new_dev_store+0x184/0x240
md_attr_store+0x80/0xf0
kernfs_fop_write_iter+0x128/0x1c0
vfs_write+0x2be/0x3c0
ksys_write+0x5f/0xe0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
It turns out the md device cannot be used:
md: could not open device unknown-block(259,0).
md: md127 stopped.
Fix the issue by declaring the local static variable of struct type
and passing the pointer of the variable to blkdev_get_by_dev().
Fixes: fb541ca4c3 ("md: remove lock_bdev / unlock_bdev")
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Unlike keys where userspace only reacts to keypresses, userspace may act
on switches in both (0 and 1) of their positions.
For example if a SW_TABLET_MODE switch is registered then GNOME will not
automatically show the onscreen keyboard when a text field gets focus on
touchscreen devices when SW_TABLET_MODE reports 0 and when SW_TABLET_MODE
reports 1 libinput will block (filter out) builtin keyboard and touchpad
events.
So to avoid unwanted side-effects EV_SW type inputs should only be
registered if they are actually present, only register SW_CAMERA_LENS_COVER
if it is actually there.
Fixes: 8af9fa37b8 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221221220724.119594-2-hdegoede@redhat.com
Use KE_VSW instead of KE_SW for the SW_CAMERA_LENS_COVER key_entry
and get the value of the switch from the status field when handling
SW_CAMERA_LENS_COVER events, instead of always reporting 0.
Also correctly set the initial SW_CAMERA_LENS_COVER value.
Fixes: 8af9fa37b8 ("platform/x86: dell-privacy: Add support for Dell hardware privacy")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221221220724.119594-1-hdegoede@redhat.com
sp_usb_phy_probe() will call platform_get_resource_byname() that may fail
and return NULL. devm_ioremap() will use usbphy->moon4_res_mem->start as
input, which may causes null-ptr-deref. Check the ret value of
platform_get_resource_byname() to avoid the null-ptr-deref.
Fixes: 99d9ccd973 ("phy: usb: Add USB2.0 phy driver for Sunplus SP7021")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20221125021222.25687-1-shangxiaojing@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
It is possible that we (the host/kernel driver) receive command messages
that are not intended for us. Ignore those for now.
The whole story is a bit more complicated: It is possible to enable
debug output on SAM, which is sent via SSH command messages. By default
this output is sent to a debug connector, with its own target ID
(TID=0x03). It is possible to override the target of the debug output
and set it to the host/kernel driver. This, however, does not change the
original target ID of the message. Meaning, we receive messages with
TID=0x03 (debug) but expect to only receive messages with TID=0x00
(host).
The problem is that the different target ID also comes with a different
scope of request IDs. In particular, these do not follow the standard
event rules (i.e. do not fall into a set of small reserved values).
Therefore, current message handling interprets them as responses to
pending requests and tries to match them up via the request ID. However,
these debug output messages are not in fact responses, and therefore
this will at best fail to find the request and at worst pass on the
wrong data as response for a request.
Therefore ignore any command messages not intended for us (host) for
now. We can implement support for the debug messages once we have a
better understanding of them.
Note that this may also provide a bit more stability and avoid some
driver confusion in case any other targets want to talk to us in the
future, since we don't yet know what to do with those as well. A warning
for the dropped messages should suffice for now and also give us a
chance of discovering new targets if they come along without any
potential for bugs/instabilities.
Fixes: c167b9c7e3 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221202223327.690880-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.2
- Identify quirks for Apple controllers (Hector Martin)
- fix error handling in nvme_pci_enable (Tong Zhang)
- refuse unprivileged passthrough on partitions (Christoph Hellwig)
- fix MAINTAINERS to not match nvmem subsystem headers (Russell King)"
* tag 'nvme-6.2-2023-01-12' of git://git.infradead.org/nvme:
MAINTAINERS: stop nvme matching for nvmem files
nvme: don't allow unprivileged passthrough on partitions
nvme: replace the "bool vec" arguments with flags in the ioctl path
nvme: remove __nvme_ioctl
nvme-pci: fix error handling in nvme_pci_enable()
nvme-pci: add NVME_QUIRK_IDENTIFY_CNS quirk to Apple T2 controllers
nvme-apple: add NVME_QUIRK_IDENTIFY_CNS quirk to fix regression
If we have multiple requests waiting on the same target poll waitqueue,
then it's quite possible to get a request triggered and get disappointed
in not being able to make any progress with it. If we race in doing so,
we'll potentially leave the poll request on the internal tables, but
removed from the waitqueue. That means that any subsequent trigger of
the poll waitqueue will not kick that request into action, causing an
application to potentially wait for completion of a request that will
never happen.
Fix this by adding a new poll return state, IOU_POLL_REISSUE. Rather
than have complicated logic for how to re-arm a given type of request,
just punt it for a reissue.
While in there, move the 'ret' variable to the only section where it
gets used. This avoids confusion the scope of it.
Cc: stable@vger.kernel.org
Fixes: eb0089d629 ("io_uring: single shot poll removal optimisation")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If smb311 posix is enabled, we send the intended mode for file
creation in the posix create context. Instead of using what's there on
the stack, create the mfsymlink file with 0644.
Fixes: ce558b0e17 ("smb3: Add posix create context for smb3.11 posix mounts")
Cc: stable@vger.kernel.org
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
When syncing a log, if we fail to update a log root in the log root tree,
we are aborting the transaction if the failure was not -ENOSPC. This is
excessive because there is a chance that a transaction commit can succeed,
and therefore avoid to turn the filesystem into RO mode. All we need to be
careful about is to mark the log for a full commit, which we already do,
to make sure no one commits a super block pointing to an outdated log root
tree.
So don't abort the transaction if we fail to update a log root in the log
root tree, and log an error if the failure is not -ENOSPC, so that it does
not go completely unnoticed.
CC: stable@vger.kernel.org # 6.0+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When syncing the log, if we fail to write log tree extent buffers, we mark
the log for a full commit and abort the transaction. However we don't need
to abort the transaction, all we really need to do is to make sure no one
can commit a superblock pointing to new log tree roots. Just because we
got a failure writing extent buffers for a log tree, it does not mean we
will also fail to do a transaction commit.
One particular case is if due to a bug somewhere, when writing log tree
extent buffers, the tree checker detects some corruption and the writeout
fails because of that. Aborting the transaction can be very disruptive for
a user, specially if the issue happened on a root filesystem. One example
is the scenario in the Link tag below, where an isolated corruption on log
tree leaves was causing transaction aborts when syncing the log.
Link: https://lore.kernel.org/linux-btrfs/ae169fc6-f504-28f0-a098-6fa6a4dfb612@leemhuis.info/
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging conflicting inodes, if we reach the maximum limit of inodes,
we return BTRFS_LOG_FORCE_COMMIT to force a transaction commit. However
we don't mark the log for full commit (with btrfs_set_log_full_commit()),
which means that once we leave the log transaction and before we commit
the transaction, some other task may sync the log, which is incomplete
as we have not logged all conflicting inodes, leading to some inconsistent
in case that log ends up being replayed.
So also call btrfs_set_log_full_commit() at add_conflicting_inode().
Fixes: e09d94c9e4 ("btrfs: log conflicting inodes without holding log mutex of the initial inode")
CC: stable@vger.kernel.org # 6.1
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Sometimes we log a directory without holding its VFS lock, so while we
logging it, dir index entries may be added or removed. This typically
happens when logging a dentry from a parent directory that points to a
new directory, through log_new_dir_dentries(), or when while logging
some other inode we also need to log its parent directories (through
btrfs_log_all_parents()).
This means that while we are at log_dir_items(), we may not find a dir
index key we found before, because it was deleted in the meanwhile, so
a call to btrfs_search_slot() may return 1 (key not found). In that case
we return from log_dir_items() with a success value (the variable 'err'
has a value of 0). This can lead to a few problems, specially in the case
where the variable 'last_offset' has a value of (u64)-1 (and it's
initialized to that when it was declared):
1) By returning from log_dir_items() with success (0) and a value of
(u64)-1 for '*last_offset_ret', we end up not logging any other dir
index keys that follow the missing, just deleted, index key. The
(u64)-1 value makes log_directory_changes() not call log_dir_items()
again;
2) Before returning with success (0), log_dir_items(), will log a dir
index range item covering a range from the last old dentry index
(stored in the variable 'last_old_dentry_offset') to the value of
'last_offset'. If 'last_offset' has a value of (u64)-1, then it means
if the log is persisted and replayed after a power failure, it will
cause deletion of all the directory entries that have an index number
between last_old_dentry_offset + 1 and (u64)-1;
3) We can end up returning from log_dir_items() with
ctx->last_dir_item_offset having a lower value than
inode->last_dir_index_offset, because the former is set to the current
key we are processing at process_dir_items_leaf(), and at the end of
log_directory_changes() we set inode->last_dir_index_offset to the
current value of ctx->last_dir_item_offset. So if for example a
deletion of a lower dir index key happened, we set
ctx->last_dir_item_offset to that index value, then if we return from
log_dir_items() because btrfs_search_slot() returned 1, we end up
returning from log_dir_items() with success (0) and then
log_directory_changes() sets inode->last_dir_index_offset to a lower
value than it had before.
This can result in unpredictable and unexpected behaviour when we
need to log again the directory in the same transaction, and can result
in ending up with a log tree leaf that has duplicated keys, as we do
batch insertions of dir index keys into a log tree.
So fix this by making log_dir_items() move on to the next dir index key
if it does not find the one it was looking for.
Reported-by: David Arendt <admin@prnet.org>
Link: https://lore.kernel.org/linux-btrfs/ae169fc6-f504-28f0-a098-6fa6a4dfb612@leemhuis.info/
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging a directory, at log_dir_items(), if we get an error when
attempting to search the subvolume tree for a dir index item, we end up
returning 0 (success) from log_dir_items() because 'err' is left with a
value of 0.
This can lead to a few problems, specially in the case the variable
'last_offset' has a value of (u64)-1 (and it's initialized to that when
it was declared):
1) By returning from log_dir_items() with success (0) and a value of
(u64)-1 for '*last_offset_ret', we end up not logging any other dir
index keys that follow the missing, just deleted, index key. The
(u64)-1 value makes log_directory_changes() not call log_dir_items()
again;
2) Before returning with success (0), log_dir_items(), will log a dir
index range item covering a range from the last old dentry index
(stored in the variable 'last_old_dentry_offset') to the value of
'last_offset'. If 'last_offset' has a value of (u64)-1, then it means
if the log is persisted and replayed after a power failure, it will
cause deletion of all the directory entries that have an index number
between last_old_dentry_offset + 1 and (u64)-1;
3) We can end up returning from log_dir_items() with
ctx->last_dir_item_offset having a lower value than
inode->last_dir_index_offset, because the former is set to the current
key we are processing at process_dir_items_leaf(), and at the end of
log_directory_changes() we set inode->last_dir_index_offset to the
current value of ctx->last_dir_item_offset. So if for example a
deletion of a lower dir index key happened, we set
ctx->last_dir_item_offset to that index value, then if we return from
log_dir_items() because btrfs_search_slot() returned an error, we end up
returning without any error from log_dir_items() and then
log_directory_changes() sets inode->last_dir_index_offset to a lower
value than it had before.
This can result in unpredictable and unexpected behaviour when we
need to log again the directory in the same transaction, and can result
in ending up with a log tree leaf that has duplicated keys, as we do
batch insertions of dir index keys into a log tree.
Fix this by setting 'err' to the value of 'ret' in case
btrfs_search_slot() or btrfs_previous_item() returned an error. That will
result in falling back to a full transaction commit.
Reported-by: David Arendt <admin@prnet.org>
Link: https://lore.kernel.org/linux-btrfs/ae169fc6-f504-28f0-a098-6fa6a4dfb612@leemhuis.info/
Fixes: e02119d5a7 ("Btrfs: Add a write ahead tree log to optimize synchronous operations")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since nfsd4_state_shrinker_count always calls mod_delayed_work with
0 delay, we can replace delayed_work with work_struct to save some
space and overhead.
Also add the call to cancel_work after unregister the shrinker
in nfs4_state_shutdown_net.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The Microsoft Devkit 2023 is a an ARM64 based machine featuring a
Realtek 8153 USB3.0-to-GBit Ethernet adapter. As in their other
machines, Microsoft uses a custom USB device ID.
Add the respective ID values to the driver. This makes Ethernet work on
the MS Devkit device. The chip has been visually confirmed to be a
RTL8153.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20230111133228.190801-1-andre.przywara@arm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 374146cad4 ("drm/vc4: Switch to drmm_mutex_init") converted,
among other functions, vc4_create_object() to use drmm_mutex_init().
However, that function is used to allocate a BO, and therefore the
mutex needs to be freed much sooner than when the DRM device is removed
from the system.
For each buffer allocation we thus end up allocating a small structure
as part of the DRM-managed mechanism that is never freed, eventually
leading us to no longer having any free memory anymore.
Let's switch back to mutex_init/mutex_destroy to deal with it properly.
Fixes: 374146cad4 ("drm/vc4: Switch to drmm_mutex_init")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230112091243.490799-1-maxime@cerno.tech
Pull spi fixes from Mark Brown:
- Fixes for long standing issues with accesses to spidev->spi during
teardown in the spidev userspace driver.
- Rename the newly added spi-cs-setup-ns DT property to be more in line
with our other delay properties before it becomes ABI.
- A few driver specific fixes.
* tag 'spi-fix-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spidev: remove debug messages that access spidev->spi without locking
spi: spidev: fix a race condition when accessing spidev->spi
spi: Rename spi-cs-setup-ns property to spi-cs-setup-delay-ns
spi: dt-bindings: Rename spi-cs-setup-ns to spi-cs-setup-delay-ns
spi: cadence: Fix busy cycles calculation
spi: mediatek: Enable irq before the spi registration
Pull regulator fixes from Mark Brown:
"A couple of small driver specific fixes, one of which I queued for 6.1
but didn't actually send out so has had *plenty* of testing in -next"
* tag 'regulator-fix-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: qcom-rpmh: PM8550 ldo11 regulator is an nldo
regulator: da9211: Use irq handler when ready
ASoC: Fixes for v6.2
There's quite a few fixes here, mostly board specific apart from the SOF
power management ones. We also have some new quirks and Kconfig tweaks
to enable existing code on new platforms, and a one liner which exposes
the SOF firmware state in debugfs to aid with debugging.
There's also a SPI fix that I mistakenly put in the wrong queue and
did some merges on top of before I noticed, it seemed more trouble than
it was worth to unpick things. A copy of the same patch is also in the
spi tree.
Pull SCSI fixes from James Bottomley:
"Ten small fixes (less the one that cleaned up a reverted removal),
nine in drivers of which the ufs one is the most critical.
The single core patch is a minor speedup to error handling"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: libsas: Grab the ATA port lock in sas_ata_device_link_abort()
scsi: hisi_sas: Fix tag freeing for reserved tags
scsi: ufs: core: WLUN suspend SSU/enter hibern8 fail recovery
scsi: scsi_debug: Delete unreachable code in inquiry_vpd_b0()
scsi: mpi3mr: Refer CONFIG_SCSI_MPI3MR in Makefile
scsi: core: scsi_error: Do not queue pointless abort workqueue functions
scsi: storvsc: Fix swiotlb bounce buffer leak in confidential VM
scsi: iscsi: Fix multiple iSCSI session unbind events sent to userspace
scsi: mpi3mr: Remove usage of dma_get_required_mask() API
scsi: mpt3sas: Remove usage of dma_get_required_mask() API
Commit 3f4c8211d9 ("x86/mm: Use mm_alloc() in poking_init()") broke
the kernel for running as Xen PV guest.
It seems as if the new address space is never activated before being
used, resulting in Xen rejecting to accept the new CR3 value (the PGD
isn't pinned).
Fix that by adding the now missing call of paravirt_arch_dup_mmap() to
poking_init(). That call was previously done by dup_mm()->dup_mmap() and
it is a NOP for all cases but for Xen PV, where it is just doing the
pinning of the PGD.
Fixes: 3f4c8211d9 ("x86/mm: Use mm_alloc() in poking_init()")
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230109150922.10578-1-jgross@suse.com
