Pull i2c component probing support from Wolfram Sang:
"Add OF component probing.
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular
device can be detected by some firmware provided identifier, other
times that information is not available, and the kernel has to try to
probe each device.
Instead of a delicate dance between drivers and device tree quirks,
this change introduces a simple I2C component probe function. For a
given class of devices on the same I2C bus, it will go through all of
them, doing a simple I2C read transfer and see which one of them
responds. It will then enable the device that responds"
* tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: fix typo in I2C OF COMPONENT PROBER
of: base: Document prefix argument for of_get_next_child_with_prefix()
i2c: Fix whitespace style issue
arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
platform/chrome: Introduce device tree hardware prober
i2c: of-prober: Add GPIO support to simple helpers
i2c: of-prober: Add simple helpers for regulator support
i2c: Introduce OF component probe function
of: base: Add for_each_child_of_node_with_prefix()
of: dynamic: Add of_changeset_update_prop_string
Pull irq fixes from Borislav Petkov:
- Move the ->select callback to the correct ops structure in
irq-mvebu-sei to fix some Marvell Armada platforms
- Add a workaround for Hisilicon ITS erratum 162100801 which can cause
some virtual interrupts to get lost
- More platform_driver::remove() conversion
* tag 'irq_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Switch back to struct platform_driver::remove()
irqchip/gicv3-its: Add workaround for hip09 ITS erratum 162100801
irqchip/irq-mvebu-sei: Move misplaced select() callback to SEI CP domain
Pull x86 fixes from Borislav Petkov:
- Add a terminating zero end-element to the array describing AMD CPUs
affected by erratum 1386 so that the matching loop actually
terminates instead of going off into the weeds
- Update the boot protocol documentation to mention the fact that the
preferred address to load the kernel to is considered in the
relocatable kernel case too
- Flush the memory buffer containing the microcode patch after applying
microcode on AMD Zen1 and Zen2, to avoid unnecessary slowdowns
- Make sure the PPIN CPU feature flag is cleared on all CPUs if PPIN
has been disabled
* tag 'x86_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Terminate the erratum_1386_microcode array
x86/Documentation: Update algo in init_size description of boot protocol
x86/microcode/AMD: Flush patch buffer mapping after application
x86/mm: Carve out INVLPG inline asm for use by others
x86/cpu: Fix PPIN initialization
Pull more kvm updates from Paolo Bonzini:
- ARM fixes
- RISC-V Svade and Svadu (accessed and dirty bit) extension support for
host and guest
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: riscv: selftests: Add Svade and Svadu Extension to get-reg-list test
RISC-V: KVM: Add Svade and Svadu Extensions Support for Guest/VM
dt-bindings: riscv: Add Svade and Svadu Entries
RISC-V: Add Svade and Svadu Extensions Support
KVM: arm64: Use MDCR_EL2.HPME to evaluate overflow of hyp counters
KVM: arm64: Ignore PMCNTENSET_EL0 while checking for overflow status
KVM: arm64: Mark set_sysreg_masks() as inline to avoid build failure
KVM: arm64: vgic-its: Add stronger type-checking to the ITS entry sizes
KVM: arm64: vgic: Kill VGIC_MAX_PRIVATE definition
KVM: arm64: vgic: Make vgic_get_irq() more robust
KVM: arm64: vgic-v3: Sanitise guest writes to GICR_INVLPIR
Pull sh updates from John Paul Adrian Glaubitz:
"Two small fixes.
The first one by Huacai Chen addresses a runtime warning when
CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS are selected
which occurs because the cpuinfo code on sh incorrectly uses NR_CPUS
when iterating CPUs instead of the runtime limit nr_cpu_ids.
A second fix by Dan Carpenter fixes a use-after-free bug in
register_intc_controller() which occurred as a result of improper
error handling in the interrupt controller driver code when
registering an interrupt controller during plat_irq_setup() on sh"
* tag 'sh-for-v6.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: intc: Fix use-after-free bug in register_intc_controller()
sh: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
Pull arm64 fixes from Catalin Marinas:
- Deselect ARCH_CORRECT_STACKTRACE_ON_KRETPROBE so that tests depending
on it don't run (and fail) on arm64
- Fix lockdep assert in the Arm SMMUv3 PMU driver
- Fix the port and device ID bits setting in the Arm CMN perf driver
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
perf/arm-cmn: Ensure port and device id bits are set properly
perf/arm-smmuv3: Fix lockdep assert in ->event_init()
arm64: disable ARCH_CORRECT_STACKTRACE_ON_KRETPROBE tests
Pull Kbuild updates from Masahiro Yamada:
- Add generic support for built-in boot DTB files
- Enable TAB cycling for dialog buttons in nconfig
- Fix issues in streamline_config.pl
- Refactor Kconfig
- Add support for Clang's AutoFDO (Automatic Feedback-Directed
Optimization)
- Add support for Clang's Propeller, a profile-guided optimization.
- Change the working directory to the external module directory for M=
builds
- Support building external modules in a separate output directory
- Enable objtool for *.mod.o and additional kernel objects
- Use lz4 instead of deprecated lz4c
- Work around a performance issue with "git describe"
- Refactor modpost
* tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (85 commits)
kbuild: rename .tmp_vmlinux.kallsyms0.syms to .tmp_vmlinux0.syms
gitignore: Don't ignore 'tags' directory
kbuild: add dependency from vmlinux to resolve_btfids
modpost: replace tdb_hash() with hash_str()
kbuild: deb-pkg: add python3:native to build dependency
genksyms: reduce indentation in export_symbol()
modpost: improve error messages in device_id_check()
modpost: rename alias symbol for MODULE_DEVICE_TABLE()
modpost: rename variables in handle_moddevtable()
modpost: move strstarts() to modpost.h
modpost: convert do_usb_table() to a generic handler
modpost: convert do_of_table() to a generic handler
modpost: convert do_pnp_device_entry() to a generic handler
modpost: convert do_pnp_card_entries() to a generic handler
modpost: call module_alias_printf() from all do_*_entry() functions
modpost: pass (struct module *) to do_*_entry() functions
modpost: remove DEF_FIELD_ADDR_VAR() macro
modpost: deduplicate MODULE_ALIAS() for all drivers
modpost: introduce module_alias_printf() helper
modpost: remove unnecessary check in do_acpi_entry()
...
Pull UML updates from Richard Weinberger:
- Lots of cleanups, mostly from Benjamin Berg and Tiwei Bie
- Removal of unused code
- Fix for sparse warnings
- Cleanup around stub_exe()
* tag 'uml-for-linus-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (68 commits)
hostfs: Fix the NULL vs IS_ERR() bug for __filemap_get_folio()
um: move thread info into task
um: Always dump trace for specified task in show_stack
um: vector: Do not use drvdata in release
um: net: Do not use drvdata in release
um: ubd: Do not use drvdata in release
um: ubd: Initialize ubd's disk pointer in ubd_add
um: virtio_uml: query the number of vqs if supported
um: virtio_uml: fix call_fd IRQ allocation
um: virtio_uml: send SET_MEM_TABLE message with the exact size
um: remove broken double fault detection
um: remove duplicate UM_NSEC_PER_SEC definition
um: remove file sync for stub data
um: always include kconfig.h and compiler-version.h
um: set DONTDUMP and DONTFORK flags on KASAN shadow memory
um: fix sparse warnings in signal code
um: fix sparse warnings from regset refactor
um: Remove double zero check
um: fix stub exe build with CONFIG_GCOV
um: Use os_set_pdeathsig helper in winch thread/process
...
Pull driver core updates from Greg KH:
"Here is a small set of driver core changes for 6.13-rc1.
Nothing major for this merge cycle, except for the two simple merge
conflicts are here just to make life interesting.
Included in here are:
- sysfs core changes and preparations for more sysfs api cleanups
that can come through all driver trees after -rc1 is out
- fw_devlink fixes based on many reports and debugging sessions
- list_for_each_reverse() removal, no one was using it!
- last-minute seq_printf() format string bug found and fixed in many
drivers all at once.
- minor bugfixes and changes full details in the shortlog"
* tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits)
Fix a potential abuse of seq_printf() format string in drivers
cpu: Remove spurious NULL in attribute_group definition
s390/con3215: Remove spurious NULL in attribute_group definition
perf: arm-ni: Remove spurious NULL in attribute_group definition
driver core: Constify bin_attribute definitions
sysfs: attribute_group: allow registration of const bin_attribute
firmware_loader: Fix possible resource leak in fw_log_firmware_info()
drivers: core: fw_devlink: Fix excess parameter description in docstring
driver core: class: Correct WARN() message in APIs class_(for_each|find)_device()
cacheinfo: Use of_property_present() for non-boolean properties
cdx: Fix cdx_mmap_resource() after constifying attr in ->mmap()
drivers: core: fw_devlink: Make the error message a bit more useful
phy: tegra: xusb: Set fwnode for xusb port devices
drm: display: Set fwnode for aux bus devices
driver core: fw_devlink: Stop trying to optimize cycle detection logic
driver core: Constify attribute arguments of binary attributes
sysfs: bin_attribute: add const read/write callback variants
sysfs: implement all BIN_ATTR_* macros in terms of __BIN_ATTR()
sysfs: treewide: constify attribute callback of bin_attribute::llseek()
sysfs: treewide: constify attribute callback of bin_attribute::mmap()
...
Pull more s390 updates from Heiko Carstens:
- Add swap entry for hugetlbfs support
- Add PTE_MARKER support for hugetlbs mappings; this fixes a regression
(possible page fault loop) which was introduced when support for
UFFDIO_POISON for hugetlbfs was added
- Add ARCH_HAS_PREEMPT_LAZY and PREEMPT_DYNAMIC support
- Mark IRQ entries in entry code, so that stack tracers can filter out
the non-IRQ parts of stack traces. This fixes stack depot capacity
limit warnings, since without filtering the number of unique stack
traces is huge
- In PCI code fix leak of struct zpci_dev object, and fix potential
double remove of hotplug slot
- Fix pagefault_disable() / pagefault_enable() unbalance in
arch_stack_user_walk_common()
- A couple of inline assembly optimizations, more cmpxchg() to
try_cmpxchg() conversions, and removal of usages of xchg() and
cmpxchg() on one and two byte memory areas
- Various other small improvements and cleanups
* tag 's390-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (27 commits)
Revert "s390/mm: Allow large pages for KASAN shadow mapping"
s390/spinlock: Use flag output constraint for arch_cmpxchg_niai8()
s390/spinlock: Use R constraint for arch_load_niai4()
s390/spinlock: Generate shorter code for arch_spin_unlock()
s390/spinlock: Remove condition code clobber from arch_spin_unlock()
s390/spinlock: Use symbolic names in inline assemblies
s390: Support PREEMPT_DYNAMIC
s390/pci: Fix potential double remove of hotplug slot
s390/pci: Fix leak of struct zpci_dev when zpci_add_device() fails
s390/mm/hugetlbfs: Add missing includes
s390/mm: Add PTE_MARKER support for hugetlbfs mappings
s390/mm: Introduce region-third and segment table swap entries
s390/mm: Introduce region-third and segment table entry present bits
s390/mm: Rearrange region-third and segment table entry SW bits
KVM: s390: Increase size of union sca_utility to four bytes
KVM: s390: Remove one byte cmpxchg() usage
KVM: s390: Use try_cmpxchg() instead of cmpxchg() loops
s390/ap: Replace xchg() with WRITE_ONCE()
s390/mm: Allow large pages for KASAN shadow mapping
s390: Add ARCH_HAS_PREEMPT_LAZY support
...
Pull MIPS updates from Thomas Bogendoerfer:
- fix for loongson64 device tree
- add SPI nand to realtek device tree
- change clock tree for mobileye
* tag 'mips_6.13_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Loongson64: DTS: Really fix PCIe port nodes for ls7a
mips: dts: realtek: Add SPI NAND controller
MIPS: mobileye: eyeq6h: add OLB nodes OLB and remove fixed clocks
MIPS: mobileye: eyeq5: use OLB as provider for fixed factor clocks
Pull ARM updates from Russell King:
- add dev_is_amba() function to allow conversions during the next cycle
- improve PREEMPT_RT performance with VFP
- KASAN fixes for vmap stack
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9431/1: mm: Pair atomic_set_release() with _read_acquire()
ARM: 9430/1: entry: Do a dummy read from VMAP shadow
ARM: 9429/1: ioremap: Sync PGDs for VMALLOC shadow
ARM: 9426/1: vfp: Move sending signals outside of vfp_state_hold()ed section.
ARM: 9425/1: vfp: Use vfp_state_hold() in vfp_support_entry().
ARM: 9424/1: vfp: Use vfp_state_hold() in vfp_sync_hwstate().
ARM: 9423/1: vfp: Provide vfp_state_hold() for VFP locking.
ARM: 9415/1: amba: Add dev_is_amba() function and export it for modules
Pull sparc updates from Andreas Larsson:
- Make sparc64 compilable with clang
- Replace one-element array with flexible array member
* tag 'sparc-for-6.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc:
sparc/vdso: Add helper function for 64-bit right shift on 32-bit target
sparc: Replace one-element array with flexible array member
sparc/build: Add SPARC target flags for compiling with clang
sparc/build: Put usage of -fcall-used* flags behind cc-option
Pull powerpc fixes from Madhavan Srinivasan:
- Fix htmldocs errors in sysfs-bus-event_source-devices-vpa-pmu
- Fix warning due to missing #size-cells on powermac
Thanks to Michael Ellerman, Yang Li, Rob Herring, and Stephen Rothwell.
* tag 'powerpc-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/prom_init: Fixup missing powermac #size-cells
docs: ABI: sysfs-bus-event_source-devices-vpa-pmu: Fix htmldocs errors
powerpc/machdep: Remove duplicated include in svm.c
This reverts commit ff123eb774.
Allowing large pages for KASAN shadow mappings isn't inherently wrong,
but adding POPULATE_KASAN_MAP_SHADOW to large_allowed() exposes an issue
in can_large_pud() and can_large_pmd().
Since commit d8073dc6bc ("s390/mm: Allow large pages only for aligned
physical addresses"), both can_large_pud() and can_large_pmd() call _pa()
to check if large page physical addresses are aligned. However, _pa()
has a side effect: it allocates memory in POPULATE_KASAN_MAP_SHADOW
mode. This results in massive memory leaks.
The proper fix would be to address both large_allowed() and _pa()'s side
effects, but for now, revert this change to avoid the leaks.
Fixes: ff123eb774 ("s390/mm: Allow large pages for KASAN shadow mapping")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add a new variant of arch_cmpxchg_niai8() which makes use of the flag
output constraint, which allows the compiler to generate slightly better
code. Also rename arch_cmpxchg_niai8() to arch_try_cmpxchg_niai8() which
reflects the purpose of the function and makes it consistent with other
"try" variants.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The load instruction used within arch_load_niai4() has a short displacement
and index register. Therefore use the R constraint to reflect this.
The used Q constraint does consider an index register.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use mvhhi instead of sth to write a zero to spinlocks. Compared to the
sth variant this avoids the load of zero to a register, and reduces
register pressure.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Both instructions in arch_spin_unlock() do not clobber the condition
code. Therefore remove the condition code clobber from the inline assembly.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Select HAVE_PREEMPT_DYNAMIC_KEY and add the pieces which are required to
support PREEMPT_DYNAMIC.
See commit 99cf983cc8 ("sched/preempt: Add PREEMPT_DYNAMIC using static
keys") and commit 1b2d3451ee ("arm64: Support PREEMPT_DYNAMIC") for more
details.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
In commit 6ee600bfbe ("s390/pci: remove hotplug slot when releasing the
device") the zpci_exit_slot() was moved from zpci_device_reserved() to
zpci_release_device() with the intention of keeping the hotplug slot
around until the device is actually removed.
Now zpci_release_device() is only called once all references are
dropped. Since the zPCI subsystem only drops its reference once the
device is in the reserved state it follows that zpci_release_device()
must only deal with devices in the reserved state. Despite that it
contains code to tear down from both configured and standby state. For
the standby case this already includes the removal of the hotplug slot
so would cause a double removal if a device was ever removed in
either configured or standby state.
Instead of causing a potential double removal in a case that should
never happen explicitly WARN_ON() if a device in non-reserved state is
released and get rid of the dead code cases.
Fixes: 6ee600bfbe ("s390/pci: remove hotplug slot when releasing the device")
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Tested-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Prior to commit 0467cdde8c ("s390/pci: Sort PCI functions prior to
creating virtual busses") the IOMMU was initialized and the device was
registered as part of zpci_create_device() with the struct zpci_dev
freed if either resulted in an error. With that commit this was moved
into a separate function called zpci_add_device().
While this new function logs when adding failed, it expects the caller
not to use and to free the struct zpci_dev on error. This difference
between it and zpci_create_device() was missed while changing the
callers and the incompletely initialized struct zpci_dev may get used in
zpci_scan_configured_device in the error path. This then leads to
a crash due to the device not being registered with the zbus. It was
also not freed in this case. Fix this by handling the error return of
zpci_add_device(). Since in this case the zdev was not added to the
zpci_list it can simply be discarded and freed. Also make this more
explicit by moving the kref_init() into zpci_add_device() and document
that zpci_zdev_get()/zpci_zdev_put() must be used after adding.
Cc: stable@vger.kernel.org
Fixes: 0467cdde8c ("s390/pci: Sort PCI functions prior to creating virtual busses")
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add missing includes to fix this randconfig compile error:
All errors (new ones prefixed by >>):
In file included from mm/pagewalk.c:5:
In file included from include/linux/hugetlb.h:798:
>> arch/s390/include/asm/hugetlb.h:94:31: error: call to undeclared function 'is_pte_marker'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
94 | return huge_pte_none(pte) || is_pte_marker(pte);
| ^
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411281002.IPkRpIcR-lkp@intel.com/
Fixes: 487ef5d4d9 ("s390/mm: Add PTE_MARKER support for hugetlbfs mappings")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Pull RISC-v updates from Palmer Dabbelt:
- Support for pointer masking in userspace
- Support for probing vector misaligned access performance
- Support for qspinlock on systems with Zacas and Zabha
* tag 'riscv-for-linus-6.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits)
RISC-V: Remove unnecessary include from compat.h
riscv: Fix default misaligned access trap
riscv: Add qspinlock support
dt-bindings: riscv: Add Ziccrse ISA extension description
riscv: Add ISA extension parsing for Ziccrse
asm-generic: ticket-lock: Add separate ticket-lock.h
asm-generic: ticket-lock: Reuse arch_spinlock_t of qspinlock
riscv: Implement xchg8/16() using Zabha
riscv: Implement arch_cmpxchg128() using Zacas
riscv: Improve zacas fully-ordered cmpxchg()
riscv: Implement cmpxchg8/16() using Zabha
dt-bindings: riscv: Add Zabha ISA extension description
riscv: Implement cmpxchg32/64() using Zacas
riscv: Do not fail to build on byte/halfword operations with Zawrs
riscv: Move cpufeature.h macros into their own header
KVM: riscv: selftests: Add Smnpm and Ssnpm to get-reg-list test
RISC-V: KVM: Allow Smnpm and Ssnpm extensions for guests
riscv: hwprobe: Export the Supm ISA extension
riscv: selftests: Add a pointer masking test
riscv: Allow ptrace control of the tagged address ABI
...
Pull LoongArch updates from Huacai Chen:
- Fix build failure with GCC 15 due to default -std=gnu23
- Add PREEMPT_RT/PREEMPT_LAZY support
- Add I2S in DTS for Loongson-2K1000/Loongson-2K2000
- Some bug fixes and other small changes
* tag 'loongarch-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Update Loongson-3 default config file
LoongArch: dts: Add I2S support to Loongson-2K2000
LoongArch: dts: Add I2S support to Loongson-2K1000
LoongArch: Allow to enable PREEMPT_LAZY
LoongArch: Allow to enable PREEMPT_RT
LoongArch: Select HAVE_POSIX_CPU_TIMERS_TASK_WORK
LoongArch: Fix sleeping in atomic context for PREEMPT_RT
LoongArch: Reduce min_delta for the arch clockevent device
LoongArch: BPF: Sign-extend return values
LoongArch: Fix build failure with GCC 15 (-std=gnu23)
LoongArch: Explicitly specify code model in Makefile
RISC-V Paches for the 6.13 Merge Window, Part 1
* Support for pointer masking in userspace,
* Support for probing vector misaligned access performance.
* Support for qspinlock on systems with Zacas and Zabha.
Commit 8a13897fb0 ("mm: userfaultfd: support UFFDIO_POISON for
hugetlbfs") added support for PTE_MARKER_POISONED for hugetlbfs, but
PTE_MARKER also needs support for swap entries. For s390, swap entries
were only supported on PTE level, not on the PMD/PUD levels that are used
for large hugetlbfs mappings.
Therefore, when writing a PTE_MARKER_POISONED entry, the resulting entry
on PMD/PUD level would be an invalid / empty entry. Further access would
then generate a pagefault loop, instead of the expected SIGBUS. It is a
loop inside the kernel, but interruptible and uffd fault handling also
calls schedule() in between, so at least it won't completely block the
system.
Previous commits prepared support for swap entries on PMD/PUD levels.
PTE_MARKER support for hugetlbfs can now be enabled by simply adding an
extra is_pte_marker() check to huge_pte_none_mostly(). Fault handling
code also needs to be adjusted to expect the VM_FAULT_HWPOISON_LARGE
fault flag, which was not possible on s390 before.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Introduce region-third (PUD) and segment table (PMD) swap entries, and
make hugetlbfs RSTE <-> PTE conversion code aware of them, so that they
can be used for hugetlbfs PTE_MARKER entries. Future work could also
build on this to enable THP_SWAP and THP_MIGRATION for s390.
Similar to PTE swap entries, bits 0-51 can be used to store the swap
offset, but bits 57-61 cannot be used for swap type because that overlaps
with the INVALID and TABLE TYPE bits. PMD/PUD swap entries must be invalid,
and have a correct table type so that pud_folded() check still works.
Bits 53-57 can be used for swap type, but those include the PROTECT bit.
So unlike swap PTEs, the PROTECT bit cannot be used to mark the swap entry.
Use the "Common-Segment/Region" bit 59 instead for that.
Also remove the !MACHINE_HAS_NX check in __set_huge_pte_at(). Otherwise,
that would clear the _SEGMENT_ENTRY_NOEXEC bit also for swap entries, where
it is used for encoding the swap type. The architecture only requires this
bit to be 0 for PTEs, with !MACHINE_HAS_NX, not for segment or region-third
entries. And the check is also redundant, because after __pte_to_rste()
conversion, for non-swap PTEs it would only be set if it was already set in
the PTE, which should never be the case for !MACHINE_HAS_NX.
This is a prerequisite for hugetlbfs PTE_MARKER support on s390, which
is needed to fix a regression introduced with commit 8a13897fb0
("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs"). That commit
depends on the availability of swap entries for hugetlbfs, which were
not available for s390 so far.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Introduce region-third and segment table entry present SW bits, and adjust
pmd/pud_present() accordingly.
Also add pmd/pud_present() checks to pmd/pud_leaf(), to return false for
future swap entries. Same logic applies to pmd_trans_huge(), make that
return pmd_leaf() instead of duplicating the same check.
huge_pte_offset() also needs to be adjusted, current code would return
NULL for !pud_present(). Use the same logic as in the generic version,
which allows for !pud_present() swap entries.
Similar to PTE, bit 63 can be used for the new SW present bit in region
and segment table entries. For segment-table entries (PMD) the architecture
says that "Bits 62-63 are available for programming", so they are safe to
use. The same is true for large leaf region-third-table entries (PUD).
However, for non-leaf region-third-table entries, bits 62-63 indicate the
TABLE LENGTH and both must be set to 1. But such entries would always be
considered as present, so it is safe to use bit 63 as PRESENT bit for PUD.
They also should not conflict with bit 62 potentially later used for
preserving SOFT_DIRTY in swap entries, because they are not swap entries.
Valid PMDs / PUDs should always have the present bit set, so add it to
the various pgprot defines, and also _SEGMENT_ENTRY which is OR'ed e.g.
in pmd_populate(). _REGION3_ENTRY wouldn't need any change, as the present
bit is already included in the TABLE LENGTH, but also explicitly add it
there, for completeness, and just in case the bit would ever be changed.
gmap code needs some adjustment, to also OR the _SEGMENT_ENTRY, like it
is already done gmap_shadow_pgt() when creating new PMDs, but not in
__gmap_link(). Otherwise, the gmap PMDs would not be considered present,
e.g. when using pmd_leaf() checks in gmap code. The various WARN_ON
checks in gmap code also need adjustment, to tolerate the new present
bit.
This is a prerequisite for hugetlbfs PTE_MARKER support on s390, which
is needed to fix a regression introduced with commit 8a13897fb0
("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs"). That commit
depends on the availability of swap entries for hugetlbfs, which were
not available for s390 so far.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Rearrange region-third and segment table entry SW bits, in order to
make room for future encoding of region/segment table swap entries.
Also adjust _SEGMENT_ENTRY_GMAP_UC and _SEGMENT_ENTRY_GMAP_IN bits in
gmap code. Those should only apply for gmap PMDs, and not really depend
on or conflict with host PMD bits, but for consistency also adjust them:
- _SEGMENT_ENTRY_GMAP_UC "dirty (migration)" was using the same bit as
_SEGMENT_ENTRY_SOFT_DIRTY in the host PMD -> make it use the new
SOFT_DIRTY bit 63 (0x0002)
- _SEGMENT_ENTRY_GMAP_IN "invalidation notify bit" was using 0x8000,
which was an unused bit in the host PMD, that is now used for
_SEGMENT_ENTRY_WRITE -> make it use bit 52 (0x0800) instead, which is
still unused in the host PMD
This is a prerequisite for hugetlbfs PTE_MARKER support on s390, which
is needed to fix a regression introduced with commit 8a13897fb0
("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs"). That commit
depends on the availability of swap entries for hugetlbfs, which were
not available for s390 so far.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
kvm_s390_update_topology_change_report() modifies a single bit within
sca_utility using cmpxchg(). Given that the size of the sca_utility union
is two bytes this generates very inefficient code. Change the size to four
bytes, so better code can be generated.
Even though the size of sca_utility doesn't reflect architecture anymore
this seems to be the easiest and most pragmatic approach to avoid
inefficient code.
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20241126102515.3178914-4-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Within sca_clear_ext_call() cmpxchg() is used to clear one or two bytes
(depending on sca format). The cmpxchg() calls are not supposed to fail; if
so that would be a bug. Given that cmpxchg() usage on one and two byte
areas generates very inefficient code, replace them with block concurrent
WRITE_ONCE() calls, and remove the WARN_ON().
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20241126102515.3178914-3-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
On some powermacs `escc` nodes are missing `#size-cells` properties,
which is deprecated and now triggers a warning at boot since commit
045b14ca5c ("of: WARN on deprecated #address-cells/#size-cells
handling").
For example:
Missing '#size-cells' in /pci@f2000000/mac-io@c/escc@13000
WARNING: CPU: 0 PID: 0 at drivers/of/base.c:133 of_bus_n_size_cells+0x98/0x108
Hardware name: PowerMac3,1 7400 0xc0209 PowerMac
...
Call Trace:
of_bus_n_size_cells+0x98/0x108 (unreliable)
of_bus_default_count_cells+0x40/0x60
__of_get_address+0xc8/0x21c
__of_address_to_resource+0x5c/0x228
pmz_init_port+0x5c/0x2ec
pmz_probe.isra.0+0x144/0x1e4
pmz_console_init+0x10/0x48
console_init+0xcc/0x138
start_kernel+0x5c4/0x694
As powermacs boot via prom_init it's possible to add the missing
properties to the device tree during boot, avoiding the warning. Note
that `escc-legacy` nodes are also missing `#size-cells` properties, but
they are skipped by the macio driver, so leave them alone.
Depends-on: 045b14ca5c ("of: WARN on deprecated #address-cells/#size-cells handling")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241126025710.591683-1-mpe@ellerman.id.au
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Make pci_stop_dev() and pci_destroy_dev() safe so concurrent
callers can't stop a device multiple times, even as we migrate from
the global pci_rescan_remove_lock to finer-grained locking (Keith
Busch)
- Improve pci_walk_bus() implementation by making it recursive and
moving locking up to avoid need for a 'locked' parameter (Keith
Busch)
- Unexport pci_walk_bus_locked(), which is only used internally by
the PCI core (Keith Busch)
- Detect some Thunderbolt chips that are built-in and hence
'trustworthy' by a heuristic since the 'ExternalFacingPort' and
'usb4-host-interface' ACPI properties are not quite enough (Esther
Shimanovich)
Resource management:
- Use PCI bus addresses (not CPU addresses) in 'ranges' properties
when building dynamic DT nodes so systems where PCI and CPU
addresses differ work correctly (Andrea della Porta)
- Tidy resource sizing and assignment with helpers to reduce
redundancy (Ilpo Järvinen)
- Improve pdev_sort_resources() 'bogus alignment' warning to be more
specific (Ilpo Järvinen)
Driver binding:
- Convert driver .remove_new() callbacks to .remove() again to finish
the conversion from returning 'int' to being 'void' (Sergio
Paracuellos)
- Export pcim_request_all_regions(), a managed interface to request
all BARs (Philipp Stanner)
- Replace pcim_iomap_regions_request_all() with
pcim_request_all_regions(), and pcim_iomap_table()[n] with
pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto
octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212
(Philipp Stanner)
- Remove the now unused pcim_iomap_regions_request_all() (Philipp
Stanner)
- Export pcim_iounmap_region(), a managed interface to unmap and
release a PCI BAR (Philipp Stanner)
- Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and
pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the
following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield,
cavium (Philipp Stanner)
Error handling:
- Add sysfs 'reset_subordinate' to reset the entire hierarchy below a
bridge; previously Secondary Bus Reset could only be used when
there was a single device below a bridge (Keith Busch)
- Warn if we reset a running device where the driver didn't register
pci_error_handlers notification callbacks (Keith Busch)
ASPM:
- Disable ASPM L1 before touching L1 PM Substates to follow the spec
closer and avoid a CPU load timeout on some platforms (Ajay
Agarwal)
- Set devices below Intel VMD to D0 before enabling ASPM L1 Substates
as required per spec for all L1 Substates changes (Jian-Hong Pan)
Power management:
- Enable starfive controller runtime PM before probing host bridge
(Mayank Rana)
- Enable runtime power management for host bridges (Krishna chaitanya
chundru)
Power control:
- Use of_platform_device_create() instead of of_platform_populate()
to create pwrctl platform devices so we can control it based on the
child nodes (Manivannan Sadhasivam)
- Create pwrctrl platform devices only if there's a relevant power
supply property (Manivannan Sadhasivam)
- Add device link from the pwrctl supplier to the PCI dev to ensure
pwrctl drivers are probed before the PCI dev driver; this avoids a
race where pwrctl could change device power state while the PCI
driver was active (Manivannan Sadhasivam)
- Find pwrctl device for removal with of_find_device_by_node()
instead of searching all children of the parent (Manivannan
Sadhasivam)
- Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller
('bwctrl') and hotplug files (Bjorn Helgaas)
Bandwidth control:
- Add read/modify/write locking for Link Control 2, which is used to
manage Link speed (Ilpo Järvinen)
- Extract Link Bandwidth Management Status check into
pcie_lbms_seen(), where it can be shared between the bandwidth
controller and quirks that use it to help retrain failed links
(Ilpo Järvinen)
- Re-add Link Bandwidth notification support with updates to address
the reasons it was previously reverted (Alexandru Gagniuc, Ilpo
Järvinen)
- Add pcie_set_target_speed() and related functionality so drivers
can manage PCIe Link speed based on thermal or other constraints
(Ilpo Järvinen)
- Add a thermal cooling driver to throttle PCIe Links via the
existing thermal management framework (Ilpo Järvinen)
- Add a userspace selftest for the PCIe bandwidth controller (Ilpo
Järvinen)
PCI device hotplug:
- Add hotplug controller driver for Marvell OCTEON multi-function
device where function 0 has a management console interface to
enable/disable and provision various personalities for the other
functions (Shijith Thotton)
- Retain a reference to the pci_bus for the lifetime of a pci_slot to
avoid a use-after-free when the thunderbolt driver resets USB4 host
routers on boot, causing hotplug remove/add of downstream docks or
other devices (Lukas Wunner)
- Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test
(Guilherme Giacomo Simoes)
- Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET)
- Use pci_bus_read_dev_vendor_id() instead of hand-coded presence
detection in cpqphp (Ilpo Järvinen)
- Simplify cpqphp enumeration, which is already simple-minded and
doesn't handle devices below hot-added bridges (Ilpo Järvinen)
Virtualization:
- Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS
capability but do isolate functions as though PCI_ACS_RR and
PCI_ACS_CR were set, so the functions can be in independent IOMMU
groups (Mengyuan Lou)
TLP Processing Hints (TPH):
- Add and document TLP Processing Hints (TPH) support so drivers can
enable and disable TPH and the kernel can save/restore TPH
configuration (Wei Huang)
- Add TPH Steering Tag support so drivers can retrieve Steering Tag
values associated with specific CPUs via an ACPI _DSM to improve
performance by directing DMA writes closer to their consumers (Wei
Huang)
Data Object Exchange (DOE):
- Wait up to 1 second for DOE Busy bit to clear before writing a
request to the mailbox to avoid failures if the mailbox is still
busy from a previous transfer (Gregory Price)
Endpoint framework:
- Skip attempts to allocate from endpoint controller memory window if
the requested size is larger than the window (Damien Le Moal)
- Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to
handle controller-specific size and alignment constraints, and add
test cases to the endpoint test driver (Damien Le Moal)
- Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can
observe DWC-specific alignment requirements (Damien Le Moal)
- Synchronously cancel command handler work in endpoint test before
cleaning up DMA and BARs (Damien Le Moal)
- Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas
Cassel)
- Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent
(Niklas Cassel)
- Avoid NULL dereference if Modem Host Interface Endpoint lacks
'mmio' DT property (Zhongqiu Han)
- Release PCI domain ID of Endpoint controller parent (not controller
itself) and before unregistering the controller, to avoid
use-after-free (Zijun Hu)
- Clear secondary (not primary) EPC in pci_epc_remove_epf() when
removing the secondary controller associated with an NTB (Zijun Hu)
Cadence PCIe controller driver:
- Lower severity of 'phy-names' message (Bartosz Wawrzyniak)
Freescale i.MX6 PCIe controller driver:
- Fix suspend/resume support on i.MX6QDL, which has a hardware
erratum that prevents use of L2 (Stefan Eichenberger)
Intel VMD host bridge driver:
- Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 DT binding to require the exact number of
clocks for each SoC (Fei Shao)
- Add support for DT 'max-link-speed' and 'num-lanes' properties to
restrict the link speed and width (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add DT and driver support for using either of the two PolarFire
Root Ports (Conor Dooley)
NVIDIA Tegra194 PCIe controller driver:
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
Qualcomm PCIe controller driver:
- Add qcom SAR2130P DT binding with an additional clock (Dmitry
Baryshkov)
- Enable MSI interrupts if 'global' IRQ is supported, since a
previous commit unintentionally masked them (Manivannan Sadhasivam)
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
- Add DT binding and driver support for IPQ9574, with Synopsys IP
v5.80a and Qcom IP 1.27.0 (devi priya)
- Move the OPP "operating-points-v2" table from the
qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it
can be used by other Qcom platforms (Qiang Yu)
- Add 'global' SPI interrupt for events like link-up, link-down to
qcom,pcie-x1e80100 DT binding so we can start enumeration when the
link comes up (Qiang Yu)
- Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned
to support this (Qiang Yu)
- Add ops_1_21_0 for SC8280X family SoC, which doesn't use the
'iommu-map' DT property and doesn't need BDF-to-SID translation
(Qiang Yu)
Rockchip PCIe controller driver:
- Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint
.align value (Damien Le Moal)
- When unmapping an endpoint window, compute the region index instead
of searching for it, and verify that the address was mapped (Damien
Le Moal)
- When mapping an endpoint window, verify that the address hasn't
been mapped already (Damien Le Moal)
- Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal)
- Fix MSI IRQ data mapping to observe the alignment constraint, which
fixes intermittent page faults in memcpy_toio() and memcpy_fromio()
(Damien Le Moal)
- Rename rockchip_pcie_parse_ep_dt() to
rockchip_pcie_ep_get_resources() for consistency with similar DT
interfaces (Damien Le Moal)
- Skip the unnecessary link train in rockchip_pcie_ep_probe() and do
it only in the endpoint start operation (Damien Le Moal)
- Implement pci_epc_ops.stop_link() to disable link training and
controller configuration (Damien Le Moal)
- Attempt link training at 5 GT/s when both partners support it
(Damien Le Moal)
- Add a handler for PERST# signal so we can detect host-initiated
resets and start link training after PERST# is deasserted (Damien
Le Moal)
Synopsys DesignWare PCIe controller driver:
- Clear outbound address on unmap so dw_pcie_find_index() won't match
an ATU index that was already unmapped (Damien Le Moal)
- Use of_property_present() instead of of_property_read_bool() when
testing for presence of non-boolean DT properties (Rob Herring)
- Advertise 1MB size if endpoint supports Resizable BARs, which was
inadvertently lost in v6.11 (Niklas Cassel)
TI J721E PCIe driver:
- Add PCIe support for J722S SoC (Siddharth Vadapalli)
- Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100
us), before deasserting PERST# to ensure power and refclk are
stable (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root
Complex mode (Kishon Vijay Abraham I)
- Try to avoid unrecoverable SError for attempts to issue config
transactions when the link is down; this is racy but the best we
can do (Kishon Vijay Abraham I)
Miscellaneous:
- Reorganize kerneldoc parameter names to match order in function
signature (Julia Lawall)
- Fix sysfs reset_method_store() memory leak (Todd Kjos)
- Simplify pci_create_slot() (Ilpo Järvinen)
- Fix incorrect printf format specifiers in pcitest (Luo Yifan)"
* tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits)
PCI: rockchip-ep: Handle PERST# signal in EP mode
PCI: rockchip-ep: Improve link training
PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
PCI: rockchip-ep: Refactor endpoint link training enable
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
PCI: rockchip-ep: Fix MSI IRQ data mapping
PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation
PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
PCI: rockchip-ep: Use a macro to define EP controller .align feature
PCI: rockchip-ep: Fix address translation unit programming
PCI/pwrctrl: Rename pwrctrl functions and structures
PCI/pwrctrl: Rename pwrctl files to pwrctrl
PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers
PCI/pwrctl: Create pwrctl device only if at least one power supply is present
PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
tools: PCI: Fix incorrect printf format specifiers
...
$(objtree) refers to the top of the output directory of kernel builds.
This commit adds the explicit $(objtree)/ prefix to build artifacts
needed for building external modules.
This change has no immediate impact, as the top-level Makefile
currently defines:
objtree := .
This commit prepares for supporting the building of external modules
in a different directory.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Add the build support for using Clang's Propeller optimizer. Like
AutoFDO, Propeller uses hardware sampling to gather information
about the frequency of execution of different code paths within a
binary. This information is then used to guide the compiler's
optimization decisions, resulting in a more efficient binary.
The support requires a Clang compiler LLVM 19 or later, and the
create_llvm_prof tool
(https://github.com/google/autofdo/releases/tag/v0.30.1). This
commit is limited to x86 platforms that support PMU features
like LBR on Intel machines and AMD Zen3 BRS.
Here is an example workflow for building an AutoFDO+Propeller
optimized kernel:
1) Build the kernel on the host machine, with AutoFDO and Propeller
build config
CONFIG_AUTOFDO_CLANG=y
CONFIG_PROPELLER_CLANG=y
then
$ make LLVM=1 CLANG_AUTOFDO_PROFILE=<autofdo_profile>
“<autofdo_profile>” is the profile collected when doing a non-Propeller
AutoFDO build. This step builds a kernel that has the same optimization
level as AutoFDO, plus a metadata section that records basic block
information. This kernel image runs as fast as an AutoFDO optimized
kernel.
2) Install the kernel on test/production machines.
3) Run the load tests. The '-c' option in perf specifies the sample
event period. We suggest using a suitable prime number,
like 500009, for this purpose.
For Intel platforms:
$ perf record -e BR_INST_RETIRED.NEAR_TAKEN:k -a -N -b -c <count> \
-o <perf_file> -- <loadtest>
For AMD platforms:
The supported system are: Zen3 with BRS, or Zen4 with amd_lbr_v2
# To see if Zen3 support LBR:
$ cat proc/cpuinfo | grep " brs"
# To see if Zen4 support LBR:
$ cat proc/cpuinfo | grep amd_lbr_v2
# If the result is yes, then collect the profile using:
$ perf record --pfm-events RETIRED_TAKEN_BRANCH_INSTRUCTIONS:k -a \
-N -b -c <count> -o <perf_file> -- <loadtest>
4) (Optional) Download the raw perf file to the host machine.
5) Generate Propeller profile:
$ create_llvm_prof --binary=<vmlinux> --profile=<perf_file> \
--format=propeller --propeller_output_module_name \
--out=<propeller_profile_prefix>_cc_profile.txt \
--propeller_symorder=<propeller_profile_prefix>_ld_profile.txt
“create_llvm_prof” is the profile conversion tool, and a prebuilt
binary for linux can be found on
https://github.com/google/autofdo/releases/tag/v0.30.1 (can also build
from source).
"<propeller_profile_prefix>" can be something like
"/home/user/dir/any_string".
This command generates a pair of Propeller profiles:
"<propeller_profile_prefix>_cc_profile.txt" and
"<propeller_profile_prefix>_ld_profile.txt".
6) Rebuild the kernel using the AutoFDO and Propeller profile files.
CONFIG_AUTOFDO_CLANG=y
CONFIG_PROPELLER_CLANG=y
and
$ make LLVM=1 CLANG_AUTOFDO_PROFILE=<autofdo_profile> \
CLANG_PROPELLER_PROFILE_PREFIX=<propeller_profile_prefix>
Co-developed-by: Han Shen <shenhan@google.com>
Signed-off-by: Han Shen <shenhan@google.com>
Signed-off-by: Rong Xu <xur@google.com>
Suggested-by: Sriraman Tallam <tmsriram@google.com>
Suggested-by: Krzysztof Pszeniczny <kpszeniczny@google.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Stephane Eranian <eranian@google.com>
Tested-by: Yonghong Song <yonghong.song@linux.dev>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When the -ffunction-sections compiler option is enabled, each function
is placed in a separate section named .text.function_name rather than
putting all functions in a single .text section.
However, using -function-sections can cause problems with the
linker script. The comments included in include/asm-generic/vmlinux.lds.h
note these issues.:
“TEXT_MAIN here will match .text.fixup and .text.unlikely if dead
code elimination is enabled, so these sections should be converted
to use ".." first.”
It is unclear whether there is a straightforward method for converting
a suffix to "..".
This patch modifies the order of subsections within the text output
section. Specifically, it changes current order:
.text.hot, .text, .text_unlikely, .text.unknown, .text.asan
to the new order:
.text.asan, .text.unknown, .text_unlikely, .text.hot, .text
Here is the rationale behind the new layout:
The majority of the code resides in three sections: .text.hot, .text,
and .text.unlikely, with .text.unknown containing a negligible amount.
.text.asan is only generated in ASAN builds.
The primary goal is to group code segments based on their execution
frequency (hotness).
First, we want to place .text.hot adjacent to .text. Since we cannot put
.text.hot after .text (Due to constraints with -ffunction-sections,
placing .text.hot after .text is problematic), we need to put
.text.hot before .text.
Then it comes to .text.unlikely, we cannot put it after .text (same
-ffunction-sections issue) . Therefore, we position .text.unlikely
before .text.hot.
.text.unknown and .tex.asan follow the same logic.
This revised ordering effectively reverses the original arrangement (for
.text.unlikely, .text.unknown, and .tex.asan), maintaining a similar level
of affinity between sections.
It also places .text.hot section at the beginning of a page to better
utilize the TLB entry.
Note that the limitation arises because the linker script employs glob
patterns instead of regular expressions for string matching. While there
is a method to maintain the current order using complex patterns, this
significantly complicates the pattern and increases the likelihood of
errors.
This patch also changes vmlinux.lds.S for the sparc64 architecture to
accommodate specific symbol placement requirements.
Co-developed-by: Han Shen <shenhan@google.com>
Signed-off-by: Han Shen <shenhan@google.com>
Signed-off-by: Rong Xu <xur@google.com>
Suggested-by: Sriraman Tallam <tmsriram@google.com>
Suggested-by: Krzysztof Pszeniczny <kpszeniczny@google.com>
Tested-by: Yonghong Song <yonghong.song@linux.dev>
Tested-by: Yabin Cui <yabinc@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull parisc architecture update from Helge Deller:
- Fix function graph tracing disablement on parisc
* tag 'parisc-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc/ftrace: Fix function graph tracing disablement
Pull m68knommu updates from Greg Ungerer:
- only include FEC platform entries when hardware supports it
- fix typo in ifdef config name
* tag 'm68knommu-for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: coldfire/device.c: only build FEC when HW macros are defined
m68k: mcfgpio: Fix incorrect register offset for CONFIG_M5441x
Without this I get a bunch of build errors like
In file included from ./include/linux/sched/task_stack.h:12,
from ./arch/riscv/include/asm/compat.h:12,
from ./arch/riscv/include/asm/pgtable.h:115,
from ./include/linux/pgtable.h:6,
from ./include/linux/mm.h:30,
from arch/riscv/kernel/asm-offsets.c:8:
./include/linux/kasan.h:50:37: error: ‘MAX_PTRS_PER_PTE’ undeclared here (not in a function); did you mean ‘PTRS_PER_PTE’?
50 | extern pte_t kasan_early_shadow_pte[MAX_PTRS_PER_PTE + PTE_HWTABLE_PTRS];
| ^~~~~~~~~~~~~~~~
| PTRS_PER_PTE
./include/linux/kasan.h:51:8: error: unknown type name ‘pmd_t’; did you mean ‘pgd_t’?
51 | extern pmd_t kasan_early_shadow_pmd[MAX_PTRS_PER_PMD];
| ^~~~~
| pgd_t
./include/linux/kasan.h:51:37: error: ‘MAX_PTRS_PER_PMD’ undeclared here (not in a function); did you mean ‘PTRS_PER_PGD’?
51 | extern pmd_t kasan_early_shadow_pmd[MAX_PTRS_PER_PMD];
| ^~~~~~~~~~~~~~~~
| PTRS_PER_PGD
./include/linux/kasan.h:52:8: error: unknown type name ‘pud_t’; did you mean ‘pgd_t’?
52 | extern pud_t kasan_early_shadow_pud[MAX_PTRS_PER_PUD];
| ^~~~~
| pgd_t
./include/linux/kasan.h:52:37: error: ‘MAX_PTRS_PER_PUD’ undeclared here (not in a function); did you mean ‘PTRS_PER_PGD’?
52 | extern pud_t kasan_early_shadow_pud[MAX_PTRS_PER_PUD];
| ^~~~~~~~~~~~~~~~
| PTRS_PER_PGD
./include/linux/kasan.h:53:8: error: unknown type name ‘p4d_t’; did you mean ‘pgd_t’?
53 | extern p4d_t kasan_early_shadow_p4d[MAX_PTRS_PER_P4D];
| ^~~~~
| pgd_t
./include/linux/kasan.h:53:37: error: ‘MAX_PTRS_PER_P4D’ undeclared here (not in a function); did you mean ‘PTRS_PER_PGD’?
53 | extern p4d_t kasan_early_shadow_p4d[MAX_PTRS_PER_P4D];
| ^~~~~~~~~~~~~~~~
| PTRS_PER_PGD
Link: https://lore.kernel.org/r/20241126143250.29708-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When enabling GICv4.1 in hip09, VMAPP fails to clear some caches during
the unmap operation, which can causes vSGIs to be lost.
To fix the issue, invalidate the related vPE cache through GICR_INVALLR
after VMOVP.
Suggested-by: Marc Zyngier <maz@kernel.org>
Co-developed-by: Nianyao Tang <tangnianyao@huawei.com>
Signed-off-by: Nianyao Tang <tangnianyao@huawei.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
