Kalle Valo says:
====================
wireless fixes for v6.10
Hopefully the last fixes for v6.10. Fix a regression in wilc1000
where bitrate Information Elements longer than 255 bytes were broken.
Few fixes also to mac80211 and iwlwifi.
* tag 'wireless-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
wifi: iwlwifi: mvm: avoid link lookup in statistics
wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
wifi: wilc1000: fix ies_len type in connect path
wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP
====================
Link: https://patch.msgid.link/20240704111431.11DEDC3277B@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Abstract the memory type from the page_pool so we can later add support
for new memory types. Convert the page_pool to use the new netmem type
abstraction, rather than use struct page directly.
As of this patch the netmem type is a no-op abstraction: it's always a
struct page underneath. All the page pool internals are converted to
use struct netmem instead of struct page, and the page pool now exports
2 APIs:
1. The existing struct page API.
2. The new struct netmem API.
Keeping the existing API is transitional; we do not want to refactor all
the current drivers using the page pool at once.
The netmem abstraction is currently a no-op. The page_pool uses
page_to_netmem() to convert allocated pages to netmem, and uses
netmem_to_page() to convert the netmem back to pages to pass to mm APIs,
Follow up patches to this series add non-paged netmem support to the
page_pool. This change is factored out on its own to limit the code
churn to this 1 patch, for ease of code review.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/20240628003253.1694510-6-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Every NIC driver utilizing XDP should invoke xdp_do_flush() after
processing all packages. With the introduction of the bpf_net_context
logic the flush lists (for dev, CPU-map and xsk) are lazy initialized
only if used. However xdp_do_flush() tries to flush all three of them so
all three lists are always initialized and the likely empty lists are
"iterated".
Without the usage of XDP but with CONFIG_DEBUG_NET the lists are also
initialized due to xdp_do_check_flushed().
Jakub suggest to utilize the hints in bpf_net_context and avoid invoking
the flush function. This will also avoiding initializing the lists which
are otherwise unused.
Introduce bpf_net_ctx_get_all_used_flush_lists() to return the
individual list if not-empty. Use the logic in xdp_do_flush() and
xdp_do_check_flushed(). Remove the not needed .*_check_flush().
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
56ef27e3 unexported page_pool_unlink_napi() and renamed it to
page_pool_disable_direct_recycling(). This is because there was no
in-tree user of page_pool_unlink_napi().
Since then Rx queue API and an implementation in bnxt got merged. In the
bnxt implementation, it broadly follows the following steps: allocate
new queue memory + page pool, stop old rx queue, swap, then destroy old
queue memory + page pool.
The existing NAPI instance is re-used so when the old page pool that is
no longer used but still linked to this shared NAPI instance is
destroyed, it will trigger warnings.
In my initial patches I unlinked a page pool from a NAPI instance
directly. Instead, export page_pool_disable_direct_recycling() and call
that instead to avoid having a driver touch a core struct.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next:
Patch #1 to #11 to shrink memory consumption for transaction objects:
struct nft_trans_chain { /* size: 120 (-32), cachelines: 2, members: 10 */
struct nft_trans_elem { /* size: 72 (-40), cachelines: 2, members: 4 */
struct nft_trans_flowtable { /* size: 80 (-48), cachelines: 2, members: 5 */
struct nft_trans_obj { /* size: 72 (-40), cachelines: 2, members: 4 */
struct nft_trans_rule { /* size: 80 (-32), cachelines: 2, members: 6 */
struct nft_trans_set { /* size: 96 (-24), cachelines: 2, members: 8 */
struct nft_trans_table { /* size: 56 (-40), cachelines: 1, members: 2 */
struct nft_trans_elem can now be allocated from kmalloc-96 instead of
kmalloc-128 slab.
Series from Florian Westphal. For the record, I have mangled patch #1
to add nft_trans_container_*() and use if for every transaction object.
I have also added BUILD_BUG_ON to ensure struct nft_trans always comes
at the beginning of the container transaction object. And few minor
cleanups, any new bugs are of my own.
Patch #12 simplify check for SCTP GSO in IPVS, from Ismael Luceno.
Patch #13 nf_conncount key length remains in the u32 bound, from Yunjian Wang.
Patch #14 removes unnecessary check for CTA_TIMEOUT_L3PROTO when setting
default conntrack timeouts via nfnetlink_cttimeout API, from
Lin Ma.
Patch #15 updates NFT_SECMARK_CTX_MAXLEN to 4096, SELinux could use
larger secctx names than the existing 256 bytes length.
Patch #16 adds a selftest to exercise nfnetlink_queue listeners leaving
nfnetlink_queue, from Florian Westphal.
Patch #17 increases hitcount from 255 to 65535 in xt_recent, from Phil Sutter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes the following deadlock introduced by 39a92a55be13
("bluetooth/l2cap: sync sock recv cb and release")
============================================
WARNING: possible recursive locking detected
6.10.0-rc3-g4029dba6b6f1 #6823 Not tainted
--------------------------------------------
kworker/u5:0/35 is trying to acquire lock:
ffff888002ec2510 (&chan->lock#2/1){+.+.}-{3:3}, at:
l2cap_sock_recv_cb+0x44/0x1e0
but task is already holding lock:
ffff888002ec2510 (&chan->lock#2/1){+.+.}-{3:3}, at:
l2cap_get_chan_by_scid+0xaf/0xd0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&chan->lock#2/1);
lock(&chan->lock#2/1);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by kworker/u5:0/35:
#0: ffff888002b8a940 ((wq_completion)hci0#2){+.+.}-{0:0}, at:
process_one_work+0x750/0x930
#1: ffff888002c67dd0 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0},
at: process_one_work+0x44e/0x930
#2: ffff888002ec2510 (&chan->lock#2/1){+.+.}-{3:3}, at:
l2cap_get_chan_by_scid+0xaf/0xd0
To fix the original problem this introduces l2cap_chan_lock at
l2cap_conless_channel to ensure that l2cap_sock_recv_cb is called with
chan->lock held.
Fixes: 89e856e124 ("bluetooth/l2cap: sync sock recv cb and release")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some Broadcom controllers found on Apple Silicon machines abuse the
reserved bits inside the PHY fields of LE Extended Advertising Report
events for additional flags. Add a quirk to drop these and correctly
extract the Primary/Secondary_PHY field.
The following excerpt from a btmon trace shows a report received with
"Reserved" for "Primary PHY" on a 4388 controller:
> HCI Event: LE Meta Event (0x3e) plen 26
LE Extended Advertising Report (0x0d)
Num reports: 1
Entry 0
Event type: 0x2515
Props: 0x0015
Connectable
Directed
Use legacy advertising PDUs
Data status: Complete
Reserved (0x2500)
Legacy PDU Type: Reserved (0x2515)
Address type: Random (0x01)
Address: 00:00:00:00:00:00 (Static)
Primary PHY: Reserved
Secondary PHY: No packets
SID: no ADI field (0xff)
TX power: 127 dBm
RSSI: -60 dBm (0xc4)
Periodic advertising interval: 0.00 msec (0x0000)
Direct address type: Public (0x00)
Direct address: 00:00:00:00:00:00 (Apple, Inc.)
Data length: 0x00
Cc: stable@vger.kernel.org
Fixes: 2e7ed5f5e6 ("Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync")
Reported-by: Janne Grunau <j@jannau.net>
Closes: https://lore.kernel.org/all/Zjz0atzRhFykROM9@robin
Tested-by: Janne Grunau <j@jannau.net>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
e3f02f32a0 ("ionic: fix kernel panic due to multi-buffer handling")
d9c0420999 ("ionic: Mark error paths in the data path as unlikely")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains two Netfilter fixes for net:
Patch #1 fixes CONFIG_SYSCTL=n for a patch coming in the previous PR
to move the sysctl toggle to enable SRv6 netfilter hooks from
nf_conntrack to the core, from Jianguo Wu.
Patch #2 fixes a possible pointer leak to userspace due to insufficient
validation of NFT_DATA_VALUE.
Linus found this pointer leak to userspace via zdi-disclosures@ and
forwarded the notice to Netfilter maintainers, he appears as reporter
because whoever found this issue never approached Netfilter
maintainers neither via security@ nor in private.
netfilter pull request 24-06-27
* tag 'nf-24-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers
netfilter: fix undefined reference to 'netfilter_lwtunnel_*' when CONFIG_SYSCTL=n
====================
Link: https://patch.msgid.link/20240626233845.151197-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
register store validation for NFT_DATA_VALUE is conditional, however,
the datatype is always either NFT_DATA_VALUE or NFT_DATA_VERDICT. This
only requires a new helper function to infer the register type from the
set datatype so this conditional check can be removed. Otherwise,
pointer to chain object can be leaked through the registers.
Fixes: 96518518cc ("netfilter: add nftables")
Reported-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nft_ctx is huge and most of the information stored within isn't used
at all.
Remove nft_ctx member from the base transaction structure and store
only what is needed.
After this change, relevant struct sizes are:
struct nft_trans_chain { /* size: 120 (-32), cachelines: 2, members: 10 */
struct nft_trans_elem { /* size: 72 (-40), cachelines: 2, members: 4 */
struct nft_trans_flowtable { /* size: 80 (-48), cachelines: 2, members: 5 */
struct nft_trans_obj { /* size: 72 (-40), cachelines: 2, members: 4 */
struct nft_trans_rule { /* size: 80 (-32), cachelines: 2, members: 6 */
struct nft_trans_set { /* size: 96 (-24), cachelines: 2, members: 8 */
struct nft_trans_table { /* size: 56 (-40), cachelines: 1, members: 2 */
struct nft_trans_elem can now be allocated from kmalloc-96 instead of
kmalloc-128 slab.
A further reduction by 8 bytes would even allow for kmalloc-64.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently the chain can be derived from trans->ctx.chain, but
the ctx will go away soon.
Thus add the chain pointer to nft_trans_rule structure itself.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
It would be better to not store nft_ctx inside nft_trans object,
the netlink ctx strucutre is huge and most of its information is
never needed in places that use trans->ctx.
Avoid/reduce its usage if possible, no runtime behaviour change
intended.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Only nft_trans_chain and nft_trans_set subtypes use the
trans->binding_list member.
Add a new common binding subtype and move the member there.
This reduces size of all other subtypes by 16 bytes on 64bit platforms.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
There is 'struct nft_trans', the basic structure for all transactional
objects, and the the various different transactional objects, such as
nft_trans_table, chain, set, set_elem and so on.
Right now 'struct nft_trans' uses a flexible member at the tail
(data[]), and casting is needed to access the actual type-specific
members.
Change this to make the hierarchy visible in source code, i.e. make
struct nft_trans the first member of all derived subtypes.
This has several advantages:
1. pahole output reflects the real size needed by the particular subtype
2. allows to use container_of() to convert the base type to the actual
object type instead of casting ->data to the overlay structure.
3. It makes it easy to add intermediate types.
'struct nft_trans' contains a 'binding_list' that is only needed
by two subtypes, so it should be part of the two subtypes, not in
the base structure.
But that makes it hard to interate over the binding_list, because
there is no common base structure.
A follow patch moves the bind list to a new struct:
struct nft_trans_binding {
struct nft_trans nft_trans;
struct list_head binding_list;
};
... and makes that structure the new 'first member' for both
nft_trans_chain and nft_trans_set.
No functional change intended in this patch.
Some numbers:
struct nft_trans { /* size: 88, cachelines: 2, members: 5 */
struct nft_trans_chain { /* size: 152, cachelines: 3, members: 10 */
struct nft_trans_elem { /* size: 112, cachelines: 2, members: 4 */
struct nft_trans_flowtable { /* size: 128, cachelines: 2, members: 5 */
struct nft_trans_obj { /* size: 112, cachelines: 2, members: 4 */
struct nft_trans_rule { /* size: 112, cachelines: 2, members: 5 */
struct nft_trans_set { /* size: 120, cachelines: 2, members: 8 */
struct nft_trans_table { /* size: 96, cachelines: 2, members: 2 */
Of particular interest is nft_trans_elem, which needs to be allocated
once for each pending (to be added or removed) set element.
Add BUILD_BUG_ON to check struct nft_trans is placed at the top of
the container structure.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When bonding is configured in BOND_MODE_BROADCAST mode, if two identical
SYN packets are received at the same time and processed on different CPUs,
it can potentially create the same sk (sock) but two different reqsk
(request_sock) in tcp_conn_request().
These two different reqsk will respond with two SYNACK packets, and since
the generation of the seq (ISN) incorporates a timestamp, the final two
SYNACK packets will have different seq values.
The consequence is that when the Client receives and replies with an ACK
to the earlier SYNACK packet, we will reset(RST) it.
========================================================================
This behavior is consistently reproducible in my local setup,
which comprises:
| NETA1 ------ NETB1 |
PC_A --- bond --- | | --- bond --- PC_B
| NETA2 ------ NETB2 |
- PC_A is the Server and has two network cards, NETA1 and NETA2. I have
bonded these two cards using BOND_MODE_BROADCAST mode and configured
them to be handled by different CPU.
- PC_B is the Client, also equipped with two network cards, NETB1 and
NETB2, which are also bonded and configured in BOND_MODE_BROADCAST mode.
If the client attempts a TCP connection to the server, it might encounter
a failure. Capturing packets from the server side reveals:
10.10.10.10.45182 > localhost: Flags [S], seq 320236027,
10.10.10.10.45182 > localhost: Flags [S], seq 320236027,
localhost > 10.10.10.10.45182: Flags [S.], seq 2967855116,
localhost > 10.10.10.10.45182: Flags [S.], seq 2967855123, <==
10.10.10.10.45182 > localhost: Flags [.], ack 4294967290,
10.10.10.10.45182 > localhost: Flags [.], ack 4294967290,
localhost > 10.10.10.10.45182: Flags [R], seq 2967855117, <==
localhost > 10.10.10.10.45182: Flags [R], seq 2967855117,
Two SYNACKs with different seq numbers are sent by localhost,
resulting in an anomaly.
========================================================================
The attempted solution is as follows:
Add a return value to inet_csk_reqsk_queue_hash_add() to confirm if the
ehash insertion is successful (Up to now, the reason for unsuccessful
insertion is that a reqsk for the same connection has already been
inserted). If the insertion fails, release the reqsk.
Due to the refcnt, Kuniyuki suggests also adding a return value check
for the DCCP module; if ehash insertion fails, indicating a successful
insertion of the same connection, simply release the reqsk as well.
Simultaneously, In the reqsk_queue_hash_req(), the start of the
req->rsk_timer is adjusted to be after successful insertion.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: luoxuanqiang <luoxuanqiang@kylinos.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240621013929.1386815-1-luoxuanqiang@kylinos.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 1971d13ffa ("af_unix: Suppress false-positive lockdep splat for
spin_lock() in __unix_gc().") added U_LOCK_GC_LISTENER for the old GC,
but it's no longer needed for the new GC.
Let's remove U_LOCK_GC_LISTENER and unix_state_lock_nested() as there's
no user.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
sk_diag_dump_icons() acquires embryo's lock by unix_state_lock_nested()
to fetch its peer.
The embryo's ->peer is set to NULL only when its parent listener is
close()d. Then, unix_release_sock() is called for each embryo after
unlinking skb by skb_dequeue().
In sk_diag_dump_icons(), we hold the parent's recvq lock, so we need
not acquire unix_state_lock_nested(), and peer is always non-NULL.
Let's remove unnecessary unix_state_lock_nested() and non-NULL test
for peer.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
While a SOCK_(STREAM|SEQPACKET) socket connect()s to another, we hold
two locks of them by unix_state_lock() and unix_state_lock_nested() in
unix_stream_connect().
Before unix_state_lock_nested(), the following is guaranteed by checking
sk->sk_state:
1. The first socket is TCP_LISTEN
2. The second socket is not the first one
3. Simultaneous connect() must fail
So, the client state can be TCP_CLOSE or TCP_LISTEN or TCP_ESTABLISHED.
Let's define the expected states as unix_state_lock_cmp_fn() instead of
using unix_state_lock_nested().
Note that 2. is detected by debug_spin_lock_before() and 3. cannot be
expressed as lock_cmp_fn.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The access to seg6_bpf_srh_states is protected by disabling preemption.
Based on the code, the entry point is input_action_end_bpf() and
every other function (the bpf helper functions bpf_lwt_seg6_*()), that
is accessing seg6_bpf_srh_states, should be called from within
input_action_end_bpf().
input_action_end_bpf() accesses seg6_bpf_srh_states first at the top of
the function and then disables preemption. This looks wrong because if
preemption needs to be disabled as part of the locking mechanism then
the variable shouldn't be accessed beforehand.
Looking at how it is used via test_lwt_seg6local.sh then
input_action_end_bpf() is always invoked from softirq context. If this
is always the case then the preempt_disable() statement is superfluous.
If this is not always invoked from softirq then disabling only
preemption is not sufficient.
Replace the preempt_disable() statement with nested-BH locking. This is
not an equivalent replacement as it assumes that the invocation of
input_action_end_bpf() always occurs in softirq context and thus the
preempt_disable() is superfluous.
Add a local_lock_t the data structure and use local_lock_nested_bh() for
locking. Add lockdep_assert_held() to ensure the lock is held while the
per-CPU variable is referenced in the helper functions.
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-13-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv4_tcp_sk is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Make a struct with a sock member (original ipv4_tcp_sk) and a
local_lock_t and use local_lock_nested_bh() for locking. This change
adds only lockdep coverage and does not alter the functional behaviour
for !PREEMPT_RT.
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240620132727.660738-7-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
1e7962114c ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error")
165f87691a ("bnxt_en: add timestamping statistics support")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the sysctl net.netfilter.nf_hooks_lwtunnel depends on the
nf_conntrack module, but the nf_conntrack module is not always loaded.
Therefore, accessing net.netfilter.nf_hooks_lwtunnel may have an error.
Move sysctl nf_hooks_lwtunnel into the netfilter core.
Fixes: 7a3f5b0de3 ("netfilter: add netfilter hooks to SRv6 data plane")
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
As defined by the MANA Hardware spec, the queue size for DMA is 4KB
minimal, and power of 2. And, the HWC queue size has to be exactly
4KB.
To support page sizes other than 4KB on ARM64, define the minimal
queue size as a macro separately from the PAGE_SIZE, which we always
assumed it to be 4KB before supporting ARM64.
Also, add MANA specific macros and update code related to size
alignment, DMA region calculations, etc.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1718655446-6576-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds two new helper functions:
flow_rule_is_supp_enc_control_flags()
flow_rule_has_enc_control_flags()
They are intended to be used for validating encapsulation control
flags, and compliment the similar helpers without "enc_" in the name.
The only difference is that they have their own error message,
to make it obvious if an unsupported flag error is related to
FLOW_DISSECTOR_KEY_CONTROL or FLOW_DISSECTOR_KEY_ENC_CONTROL.
flow_rule_has_enc_control_flags() is for drivers supporting
FLOW_DISSECTOR_KEY_ENC_CONTROL, but not supporting any
encapsulation control flags.
(Currently all 4 drivers fits this category)
flow_rule_is_supp_enc_control_flags() is currently only used
for the above helper, but should also be used by drivers once
they implement at least one encapsulation control flag.
There is AFAICT currently no need for an "enc_" variant of
flow_rule_match_has_control_flags(), as all drivers currently
supporting FLOW_DISSECTOR_KEY_ENC_CONTROL, are already calling
flow_rule_match_enc_control() directly.
Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/20240609173358.193178-2-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When calculating hashes for the purpose of multipath forwarding, both IPv4
and IPv6 code currently fall back on flow_hash_from_keys(). That uses a
randomly-generated seed. That's a fine choice by default, but unfortunately
some deployments may need a tighter control over the seed used.
In this patch, make the seed configurable by adding a new sysctl key,
net.ipv4.fib_multipath_hash_seed to control the seed. This seed is used
specifically for multipath forwarding and not for the other concerns that
flow_hash_from_keys() is used for, such as queue selection. Expose the knob
as sysctl because other such settings, such as headers to hash, are also
handled that way. Like those, the multipath hash seed is a per-netns
variable.
Despite being placed in the net.ipv4 namespace, the multipath seed sysctl
is used for both IPv4 and IPv6, similarly to e.g. a number of TCP
variables.
The seed used by flow_hash_from_keys() is a 128-bit quantity. However it
seems that usually the seed is a much more modest value. 32 bits seem
typical (Cisco, Cumulus), some systems go even lower. For that reason, and
to decouple the user interface from implementation details, go with a
32-bit quantity, which is then quadruplicated to form the siphash key.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240607151357.421181-3-petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now there are tracepoints, that cover all functionality of
tcp_hash_fail(), but also wire up missing places
They are also faster, can be disabled and provide filtering.
This potentially may create a regression if a userspace depends on dmesg
logs. Fingers crossed, let's see if anyone complains in reality.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two reasons:
1. It's grown up enough
2. In order to not do header spaghetti by including
<trace/events/tcp.h>, which is necessary for TCP tracepoints.
While at it, unexport and make static tcp_inbound_ao_hash().
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's possible to clean-up some ifdefs by hiding that
tcp_{md5,ao}_needed static branch is defined and compiled only
under related configs, since commit 4c8530dc7d ("net/tcp: Only produce
AO/MD5 logs if there are any keys").
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kalle Valo says:
====================
wireless-next patches for v6.11
The first "new features" pull request for v6.11 with changes both in
stack and in drivers. Nothing out of ordinary, except that we have
two conflicts this time:
net/mac80211/cfg.c
https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au
drivers/net/wireless/microchip/wilc1000/netdev.c
https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au
Major changes:
cfg80211/mac80211
* parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers
wilc1000
* read MAC address during probe to make it visible to user space
iwlwifi
* bump FW API to 91 for BZ/SC devices
* report 64-bit radiotap timestamp
* enable P2P low latency by default
* handle Transmit Power Envelope (TPE) advertised by AP
* start using guard()
rtlwifi
* RTL8192DU support
ath12k
* remove unsupported tx monitor handling
* channel 2 in 6 GHz band support
* Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
* multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA)
support
* dynamic VLAN support
* add panic handler for resetting the firmware state
ath10k
* add qcom,no-msa-ready-indicator Device Tree property
* LED support for various chipsets
* tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits)
wifi: ath12k: add hw_link_id in ath12k_pdev
wifi: ath12k: add panic handler
wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity()
wifi: brcm80211: remove unused structs
wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type)
wifi: ath12k: do not process consecutive RDDM event
dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example
wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup()
wifi: rtlwifi: handle return value of usb init TX/RX
wifi: rtlwifi: Enable the new rtl8192du driver
wifi: rtlwifi: Add rtl8192du/sw.c
wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg
wifi: rtlwifi: Add rtl8192du/dm.{c,h}
wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h}
wifi: rtlwifi: Add rtl8192du/rf.{c,h}
wifi: rtlwifi: Add rtl8192du/trx.{c,h}
wifi: rtlwifi: Add rtl8192du/phy.{c,h}
wifi: rtlwifi: Add rtl8192du/hw.{c,h}
wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU
wifi: rtlwifi: Add rtl8192du/table.{c,h}
...
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This removes the bogus check for max > hcon->le_conn_max_interval since
the later is just the initial maximum conn interval not the maximum the
stack could support which is really 3200=4000ms.
In order to pass GAP/CONN/CPUP/BV-05-C one shall probably enter values
of the following fields in IXIT that would cause hci_check_conn_params
to fail:
TSPX_conn_update_int_min
TSPX_conn_update_int_max
TSPX_conn_update_peripheral_latency
TSPX_conn_update_supervision_timeout
Link: https://github.com/bluez/bluez/issues/847
Fixes: e4b019515f ("Bluetooth: Enforce validation on max value of connection interval")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When innerprotoinherit is set, the tunneled packets do not have an inner
Ethernet header.
Change 'maclen' to not always assume the header length is ETH_HLEN, as
there might not be a MAC header.
This resolves issues with drivers (e.g. mlx5, in
mlx5e_tx_tunnel_accel()) who rely on the skb inner network header offset
to be correct, and use it for TX offloads.
Fixes: d8a6213d70 ("geneve: fix header validation in geneve[6]_xmit_skb")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Its no longer used outside inet_timewait_sock.c, so move it there.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TCP timewait timer is proving to be problematic for setups where
scheduler CPU isolation is achieved at runtime via cpusets (as opposed to
statically via isolcpus=domains).
What happens there is a CPU goes through tcp_time_wait(), arming the
time_wait timer, then gets isolated. TCP_TIMEWAIT_LEN later, the timer
fires, causing interference for the now-isolated CPU. This is conceptually
similar to the issue described in commit e02b931248 ("workqueue: Unbind
kworkers before sending them to exit()")
Move inet_twsk_schedule() to within inet_twsk_hashdance(), with the ehash
lock held. Expand the lock's critical section from inet_twsk_kill() to
inet_twsk_deschedule_put(), serializing the scheduling vs descheduling of
the timer. IOW, this prevents the following race:
tcp_time_wait()
inet_twsk_hashdance()
inet_twsk_deschedule_put()
del_timer_sync()
inet_twsk_schedule()
Thanks to Paolo Abeni for suggesting to leverage the ehash lock.
This also restores a comment from commit ec94c2696f ("tcp/dccp: avoid
one atomic operation for timewait hashdance") as inet_twsk_hashdance() had
a "Step 1" and "Step 3" comment, but the "Step 2" had gone missing.
inet_twsk_deschedule_put() now acquires the ehash spinlock to synchronize
with inet_twsk_hashdance_schedule().
To ease possible regression search, actual un-pin is done in next patch.
Link: https://lore.kernel.org/all/ZPhpfMjSiHVjQkTk@localhost.localdomain/
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/pensando/ionic/ionic_txrx.c
d9c0420999 ("ionic: Mark error paths in the data path as unlikely")
491aee894a ("ionic: fix kernel panic in XDP_TX action")
net/ipv6/ip6_fib.c
b4cb4a1391 ("net: use unrcu_pointer() helper")
b01e1c0307 ("ipv6: fix possible race in __fib6_drop_pcpu_from()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
reqsk_alloc() has a single caller, no need to expose it
in include/net/request_sock.h.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
