Kuniyuki Iwashima says:
====================
sysctl: Fix data-races around ipv4_net_table (Roun).
This series fixes data-races around the first 13 knobs and
nexthop_compat_mode in ipv4_net_table.
I will post another patch for three early_demux knobs later,
so the next round will start from ip_default_ttl.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading nexthop_compat_mode, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes: 4f80116d3d ("net: ipv4: add sysctl for nexthop api compatibility mode")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_ip_dynaddr, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_tcp_ecn_fallback, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 492135557d ("tcp: add rfc3168, section 6.1.1.1. fallback")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_tcp_ecn, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_raw_l3mdev_accept, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 6897445fb1 ("net: provide a sysctl raw_l3mdev_accept for raw socket lookup with VRFs")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_icmp_ratemask, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_icmp_ratelimit, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_icmp_errors_use_inbound_ifaddr, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its reader.
Fixes: 1c2fb7f93c ("[IPV4]: Sysctl configurable icmp error source address.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_icmp_ignore_bogus_error_responses, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its reader.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_icmp_echo_ignore_broadcasts, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its reader.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_icmp_echo_enable_probe, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its readers.
Fixes: d329ea5bd8 ("icmp: add response to RFC 8335 PROBE messages")
Fixes: 1fd07f33c3 ("ipv6: ICMPV6: add response to ICMPV6 RFC 8335 PROBE messages")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_icmp_echo_ignore_all, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_max_tw_buckets, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_dointvec_ms_jiffies() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side. For now,
proc_dointvec_ms_jiffies() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_dou8vec_minmax() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side. For now,
proc_dou8vec_minmax() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.
Fixes: cb94441306 ("sysctl: add proc_dou8vec_minmax()")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the regulator_get_optional() call for the SRAM regulator returns
a probe deferral, we must bail out and retry probing later: failing
to do this will produce unstabilities on platforms requiring the
handling for this regulator.
Fixes: ffa7bdf7f3 ("cpufreq: mediatek: Make sram regulator optional")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
x86_has_pat_wp() is using a wrong test, as it relies on the normal
PAT configuration used by the kernel. In case the PAT MSR has been
setup by another entity (e.g. Xen hypervisor) it might return false
even if the PAT configuration is allowing WP mappings. This due to the
fact that when running as Xen PV guest the PAT MSR is setup by the
hypervisor and cannot be changed by the guest. This results in the WP
related entry to be at a different position when running as Xen PV
guest compared to the bare metal or fully virtualized case.
The correct way to test for WP support is:
1. Get the PTE protection bits needed to select WP mode by reading
__cachemode2pte_tbl[_PAGE_CACHE_MODE_WP] (depending on the PAT MSR
setting this might return protection bits for a stronger mode, e.g.
UC-)
2. Translate those bits back into the real cache mode selected by those
PTE bits by reading __pte2cachemode_tbl[__pte2cm_idx(prot)]
3. Test for the cache mode to be _PAGE_CACHE_MODE_WP
Fixes: f88a68facd ("x86/mm: Extend early_memremap() support with additional attrs")
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org> # 4.14
Link: https://lore.kernel.org/r/20220503132207.17234-1-jgross@suse.com
The build on x86_32 currently fails after commit
9bb2ec608a (objtool: Update Retpoline validation)
with:
arch/x86/kernel/../../x86/xen/xen-head.S:35: Error: no such instruction: `annotate_unret_safe'
ANNOTATE_UNRET_SAFE is defined in nospec-branch.h. And head_32.S is
missing this include. Fix this.
Fixes: 9bb2ec608a ("objtool: Update Retpoline validation")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/63e23f80-033f-f64e-7522-2816debbc367@kernel.org
Yang Jihing reported a race between perf_event_set_output() and
perf_mmap_close():
CPU1 CPU2
perf_mmap_close(e2)
if (atomic_dec_and_test(&e2->rb->mmap_count)) // 1 - > 0
detach_rest = true
ioctl(e1, IOC_SET_OUTPUT, e2)
perf_event_set_output(e1, e2)
...
list_for_each_entry_rcu(e, &e2->rb->event_list, rb_entry)
ring_buffer_attach(e, NULL);
// e1 isn't yet added and
// therefore not detached
ring_buffer_attach(e1, e2->rb)
list_add_rcu(&e1->rb_entry,
&e2->rb->event_list)
After this; e1 is attached to an unmapped rb and a subsequent
perf_mmap() will loop forever more:
again:
mutex_lock(&e->mmap_mutex);
if (event->rb) {
...
if (!atomic_inc_not_zero(&e->rb->mmap_count)) {
...
mutex_unlock(&e->mmap_mutex);
goto again;
}
}
The loop in perf_mmap_close() holds e2->mmap_mutex, while the attach
in perf_event_set_output() holds e1->mmap_mutex. As such there is no
serialization to avoid this race.
Change perf_event_set_output() to take both e1->mmap_mutex and
e2->mmap_mutex to alleviate that problem. Additionally, have the loop
in perf_mmap() detach the rb directly, this avoids having to wait for
the concurrent perf_mmap_close() to get around to doing it to make
progress.
Fixes: 9bb5d40cd9 ("perf: Fix mmap() accounting hole")
Reported-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yang Jihong <yangjihong1@huawei.com>
Link: https://lkml.kernel.org/r/YsQ3jm2GR38SW7uD@worktop.programming.kicks-ass.net
Qualcomm DTS fixe for 5.19
The pinctrl state was lost in the recent refactoring of the MSM8974
Devicetree, this contains a fix for this.
* tag 'qcom-dts-fixes-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: msm8974: re-add missing pinctrl
Link: https://lore.kernel.org/r/20220713030627.1371156-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM64-based SoCs Device Tree fixes
for 5.19, please pull the following:
- William corrects the BCM4906 DTS to have an armv8-timer Device Tree,
necessary for booting, and fixes the BCM4908 DTS to have a proper
'enable-method' and 'cpu-release-addr' properties for the kernel to boot
when using u-boot
* tag 'arm-soc/for-5.19/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm4908: Fix cpu node for smp boot
arm64: dts: broadcom: bcm4908: Fix timer node for BCM4906 SoC
Link: https://lore.kernel.org/r/20220712231222.97850-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The upper 32-bit PHC register is not latched when reading the lower
32-bit PHC register. Current code leaves a small window where we may
not read correct higher order bits if the lower order bits are just about
to wrap around.
This patch fixes this by reading higher order bits twice and makes
sure that final value is correctly paired with its lower 32 bits.
Fixes: 30e96f487f ("bnxt_en: Do not read the PTP PHC during chip reset")
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the missing length hint in the TX BD for the XDP transmit path. The
length hint is required on legacy chips.
Also, simplify the code by eliminating the first_buf local variable.
tx_buf contains the same value. The opaque value only needs to be set
on the first BD. Fix this also for correctness.
Fixes: a7559bc8c1 ("bnxt: support transmit and free of aggregation buffers")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bnxt_reinit_after_abort() is called during ifup when a previous
FW reset sequence has aborted or a previous ifup has failed after
detecting FW reset. In all cases, it is safe to assume that a
previous FW reset has completed and the driver may not have fully
reinitialized.
Prior to this patch, it is assumed that the
FUNC_DRV_IF_CHANGE_RESP_FLAGS_HOT_FW_RESET_DONE flag will always be
set by the firmware in bnxt_hwrm_if_change(). This may not be true if
the driver has already attempted to register with the firmware. The
firmware may not set the RESET_DONE flag again after the driver has
registered, assuming that the driver has seen the flag already.
Fix it to always go through the FW reset initialization path if
the BNXT_STATE_FW_RESET_DET flag is set. This flag is always set
by the driver after successfully going through bnxt_reinit_after_abort().
Fixes: 6882c36cf8 ("bnxt_en: attempt to reinitialize after aborted reset")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If bnxt_sriov_enable() fails after some resources have been reserved
for the VFs, the current code is not unwinding properly and the
reserved resources become unavailable afterwards. Fix it by
properly unwinding with a call to bnxt_hwrm_func_qcaps() to
reset all maximum resources.
Also, add the missing bnxt_ulp_sriov_cfg() call to let the RDMA
driver know to abort.
Fixes: c0c050c58d ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull tracing fixes from Steven Rostedt:
"Fixes and minor clean ups for tracing:
- Fix memory leak by reverting what was thought to be a double free.
A static tool had gave a false positive that a double free was
possible in the error path, but it was actually a different
location that confused the static analyzer (and those of us that
reviewed it).
- Move use of static buffers by ftrace_dump() to a location that can
be used by kgdb's ftdump(), as it needs it for the same reasons.
- Clarify in the Kconfig description that function tracing has
negligible impact on x86, but may have a bit bigger impact on other
architectures.
- Remove unnecessary extra semicolon in trace event.
- Make a local variable static that is used in the fprobes sample
- Use KSYM_NAME_LEN for length of function in kprobe sample and get
rid of unneeded macro for the same purpose"
* tag 'trace-v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
samples: Use KSYM_NAME_LEN for kprobes
fprobe/samples: Make sample_probe static
blk-iocost: tracing: atomic64_read(&ioc->vtime_rate) is assigned an extra semicolon
ftrace: Be more specific about arch impact when function tracer is enabled
tracing: Fix sleeping while atomic in kdb ftdump
tracing/histograms: Fix memory leak problem
We employ a "waitboost" heuristic to detect when userspace is stalled
waiting for results from earlier execution. Under latency sensitive work
mixed between the gpu/cpu, the GPU is typically under-utilised and so
RPS sees that low utilisation as a reason to downclock the frequency,
causing longer stalls and lower throughput. The user left waiting for
the results is not impressed.
On applying commit 047a1b877e ("dma-buf & drm/amdgpu: remove dma_resv
workaround") it was observed that deinterlacing h264 on Haswell
performance dropped by 2-5x. The reason being that the natural workload
was not intense enough to trigger RPS (using HW evaluation intervals) to
upclock, and so it was depending on waitboosting for the throughput.
Commit 047a1b877e ("dma-buf & drm/amdgpu: remove dma_resv workaround")
changes the composition of dma-resv from keeping a single write fence +
multiple read fences, to a single array of multiple write and read
fences (a maximum of one pair of write/read fences per context). The
iteration order was also changed implicitly from all-read fences then
the single write fence, to a mix of write fences followed by read
fences. It is that ordering change that belied the fragility of
waitboosting.
Currently, a waitboost is inspected at the point of waiting on an
outstanding fence. If the GPU is backlogged such that we haven't yet
stated the request we need to wait on, we force the GPU to upclock until
the completion of that request. By changing the order in which we waited
upon requests, we ended up waiting on those requests in sequence and as
such we saw that each request was already started and so not a suitable
candidate for waitboosting.
Instead of asking whether to boost each fence in turn, we can look at
whether boosting is required for the dma-resv ensemble prior to waiting
on any fence, making the heuristic more robust to the order in which
fences are stored in the dma-resv.
Reported-by: Thomas Voegtle <tv@lio96.de>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6284
Fixes: 047a1b877e ("dma-buf & drm/amdgpu: remove dma_resv workaround")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Karolina Drobnik <karolina.drobnik@intel.com>
Tested-by: Thomas Voegtle <tv@lio96.de>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/07e05518d9f6620d20cc1101ec1849203fe973f9.1657289332.git.karolina.drobnik@intel.com
(cherry picked from commit 394e2b57a9)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
It was brought up that on ARMv7, that because the FUNCTION_TRACER does not
use nops to keep function tracing disabled because of the use of a link
register, it does have some performance impact.
The start of functions when -pg is used to compile the kernel is:
push {lr}
bl 8010e7c0 <__gnu_mcount_nc>
When function tracing is tuned off, it becomes:
push {lr}
add sp, sp, #4
Which just puts the stack back to its normal location. But these two
instructions at the start of every function does incur some overhead.
Be more honest in the Kconfig FUNCTION_TRACER description and specify that
the overhead being in the noise was x86 specific, but other architectures
may vary.
Link: https://lore.kernel.org/all/20220705105416.GE5208@pengutronix.de/
Link: https://lkml.kernel.org/r/20220706161231.085a83da@gandalf.local.home
Reported-by: Sascha Hauer <sha@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If you drop into kdb and type "ftdump" you'll get a sleeping while
atomic warning from memory allocation in trace_find_next_entry().
This appears to have been caused by commit ff895103a8 ("tracing:
Save off entry when peeking at next entry"), which added the
allocation in that path. The problematic commit was already fixed by
commit 8e99cf91b9 ("tracing: Do not allocate buffer in
trace_find_next_entry() in atomic") but that fix missed the kdb case.
The fix here is easy: just move the assignment of the static buffer to
the place where it should have been to begin with:
trace_init_global_iter(). That function is called in two places, once
is right before the assignment of the static buffer added by the
previous fix and once is in kdb.
Note that it appears that there's a second static buffer that we need
to assign that was added in commit efbbdaa22b ("tracing: Show real
address for trace event arguments"), so we'll move that too.
Link: https://lkml.kernel.org/r/20220708170919.1.I75844e5038d9425add2ad853a608cb44bb39df40@changeid
Fixes: ff895103a8 ("tracing: Save off entry when peeking at next entry")
Fixes: efbbdaa22b ("tracing: Show real address for trace event arguments")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This reverts commit 46bbe5c671.
As commit 46bbe5c671 ("tracing: fix double free") said, the
"double free" problem reported by clang static analyzer is:
> In parse_var_defs() if there is a problem allocating
> var_defs.expr, the earlier var_defs.name is freed.
> This free is duplicated by free_var_defs() which frees
> the rest of the list.
However, if there is a problem allocating N-th var_defs.expr:
+ in parse_var_defs(), the freed 'earlier var_defs.name' is
actually the N-th var_defs.name;
+ then in free_var_defs(), the names from 0th to (N-1)-th are freed;
IF ALLOCATING PROBLEM HAPPENED HERE!!! -+
\
|
0th 1th (N-1)-th N-th V
+-------------+-------------+-----+-------------+-----------
var_defs: | name | expr | name | expr | ... | name | expr | name | ///
+-------------+-------------+-----+-------------+-----------
These two frees don't act on same name, so there was no "double free"
problem before. Conversely, after that commit, we get a "memory leak"
problem because the above "N-th var_defs.name" is not freed.
If enable CONFIG_DEBUG_KMEMLEAK and inject a fault at where the N-th
var_defs.expr allocated, then execute on shell like:
$ echo 'hist:key=call_site:val=$v1,$v2:v1=bytes_req,v2=bytes_alloc' > \
/sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
Then kmemleak reports:
unreferenced object 0xffff8fb100ef3518 (size 8):
comm "bash", pid 196, jiffies 4295681690 (age 28.538s)
hex dump (first 8 bytes):
76 31 00 00 b1 8f ff ff v1......
backtrace:
[<0000000038fe4895>] kstrdup+0x2d/0x60
[<00000000c99c049a>] event_hist_trigger_parse+0x206f/0x20e0
[<00000000ae70d2cc>] trigger_process_regex+0xc0/0x110
[<0000000066737a4c>] event_trigger_write+0x75/0xd0
[<000000007341e40c>] vfs_write+0xbb/0x2a0
[<0000000087fde4c2>] ksys_write+0x59/0xd0
[<00000000581e9cdf>] do_syscall_64+0x3a/0x80
[<00000000cf3b065c>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
Link: https://lkml.kernel.org/r/20220711014731.69520-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Fixes: 46bbe5c671 ("tracing: fix double free")
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When creating a snapshot of the NVM the driver needs to read the entire
contents from the NVM and store it. The NVM reads are protected by a lock
that is shared between the driver and the firmware.
If the driver takes too long to read the entire NVM (which can happen on
some systems) then the firmware could reclaim the lock and cause subsequent
reads from the driver to fail.
We could fix this by increasing the timeout that we pass to the firmware,
but we could end up in the same situation again if the system is slow.
Instead have the driver break the reading of the NVM into blocks that are
small enough that we have confidence that the read will complete within the
timeout time, but large enough not to cause significant AQ overhead.
Fixes: dce730f178 ("ice: add a devlink region for dumping NVM contents")
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
