Use correct clocks properties for the AD7124 family of ADCs.
These ADCs have an internal clock along with an optional external clock
that can be connected to the CLK pin. This pin can be wired up 3 ways:
1. Not connected - the internal clock is used.
2. Connected to an external clock (input) - the external clock is used.
3. Connected to the CLK pin on another ADC (output) - the internal clock
is used on one and the other is configured for an external clock.
The new bindings describe these 3 cases by picking one of the following:
1. Omit both clocks and #clock-cells properties.
2. Include only the clocks property with a phandle to the external clock.
3. Include only the #clock-cells property on the ADC providing the output.
The clock-names property is now deprecated and should not be used. The
MCLK signal that it refers to is an internal counter in the ADC and
therefore does not make sense as a devicetree property as it can't be
connected to anything external to the ADC. Since there is only one
possible external clock, the clock-names property is not needed anyway.
Based on the implementation of the Linux driver, it looks like the
"mclk" clock was basically being used as a control to select the power
mode of the ADC, which is not something that should be done in the
devicetree.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250828-iio-adc-ad7124-proper-clock-support-v3-1-0b317b4605e5@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add microchip,mcp9601 compatible in addition to the original
microchip,mcp9600 to designate support between these two chips.
The current dt-binding has open-circuit and short-circuit as interrupt
names, but these are only supported in mcp9601.
The OC and SC detection requires that mcp9601 VSENSE be wired up, which
not only enables the OC SC interrupts, but also the OC and SC status
register bits.
Add a microchip,vsense boolean to show the chip is wired for this
support.
Add constraints so this feature only applies if the mcp9601 compatible
is selected.
Signed-off-by: Ben Collins <bcollins@watter.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250822-upstream-changes-v8-2-40bb1739e3e2@watter.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ROHM BD79105 is a simple, 16-bit, 1-channel ADC with a 'CONVSTART'
pin used to start the ADC conversion. Other than the 'CONVSTART', there
are 3 supply pins (one used as a reference), analog inputs, ground and
communication pins. It's worth noting that the pin somewhat confusingly
labeled as 'DIN', is a pin which should be used as a chip-select. The IC
does not have any writable registers.
The device is designed so that the output pin can, in addition to
outputting the data, be used as a 'data-ready'-IRQ. There are cases
where the IRQ can't be used (because it is delivered via SPI data-line).
Hence, some systems may use a GPIO for polling the data readiness.
Add a compatible for the bd79105 and add the data-ready GPIO to the
binding.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/3f70f68665225be3091f8a0412e74037b6a2a88e.1754901948.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Describe the inactivity detection additionally using the free-fall
register. Due to the controversial discussions on the mailing list, this
section of the documentation will be committed separately to allow for a
more focused and detailed elaboration of the topic.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20250727210014.27766-8-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The SARADC controller in most Rockchip SoCs are part of power domains
that are always powered on, i.e. PD_BUS or PD_PERI. These always powered
on power domains have typically not been described in the device tree.
Because these power domains have been left out of the device tree there
has not been any real need to properly describe the power domain of the
SARADC controller.
On RK3528 the SARADC controller is part of the PD_VPU power domain.
Add support to describe an optional power-domains for the SARADC
controller in Rockchip SoCs.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250723085654.2273324-4-jonas@kwiboo.se
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Pull EFI updates from Ard Biesheuvel:
- Expose the OVMF firmware debug log via sysfs
- Lower the default log level for the EFI stub to avoid corrupting any
splash screens with unimportant diagnostic output
* tag 'efi-next-for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: add API doc entry for ovmf_debug_log
efistub: Lower default log level
efi: add ovmf debug log driver
Pull mailbox updates from Jassi Brar:
- aspeed: add driver and bindings for ast2700
- broadcom: add driver and bindings for bcm74110
- mediatek: fix RPM api usage
- qcom: use dev_fwnode
- pcc: support shared buffer
- misc dt-bindings cleanup
* tag 'mailbox-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox/pcc: support mailbox management of the shared buffer
mailbox: bcm74110: Fix spelling mistake
mailbox: bcm74110: remove unneeded semicolon
mailbox: aspeed: add mailbox driver for AST27XX series SoC
dt-bindings: mailbox: Add ASPEED AST2700 series SoC
dt-bindings: mailbox: Drop consumers example DTS
dt-bindings: mailbox: nvidia,tegra186-hsp: Use generic node name
dt-bindings: mailbox: Correct example indentation
dt-bindings: mailbox: ti,secure-proxy: Add missing reg maxItems
dt-bindings: mailbox: amlogic,meson-gxbb-mhu: Add missing interrupts maxItems
dt-bindings: mailbox: qcom-ipcc: document the Milos Inter-Processor Communication Controller
mailbox: Add support for bcm74110
dt-bindings: mailbox: Add support for bcm74110
mailbox: Use dev_fwnode()
mailbox: mtk-cmdq: Switch to pm_runtime_put_autosuspend()
Pull networking fixes from Jakub Kicinski:
Previous releases - regressions:
- netlink: avoid infinite retry looping in netlink_unicast()
Previous releases - always broken:
- packet: fix a race in packet_set_ring() and packet_notifier()
- ipv6: reject malicious packets in ipv6_gso_segment()
- sched: mqprio: fix stack out-of-bounds write in tc entry parsing
- net: drop UFO packets (injected via virtio) in udp_rcv_segment()
- eth: mlx5: correctly set gso_segs when LRO is used, avoid false
positive checksum validation errors
- netpoll: prevent hanging NAPI when netcons gets enabled
- phy: mscc: fix parsing of unicast frames for PTP timestamping
- a number of device tree / OF reference leak fixes"
* tag 'net-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
pptp: fix pptp_xmit() error path
net: ti: icssg-prueth: Fix skb handling for XDP_PASS
net: Update threaded state in napi config in netif_set_threaded
selftests: netdevsim: Xfail nexthop test on slow machines
eth: fbnic: Lock the tx_dropped update
eth: fbnic: Fix tx_dropped reporting
eth: fbnic: remove the debugging trick of super high page bias
net: ftgmac100: fix potential NULL pointer access in ftgmac100_phy_disconnect
dt-bindings: net: Replace bouncing Alexandru Tachici emails
dpll: zl3073x: ZL3073X_I2C and ZL3073X_SPI should depend on NET
net/sched: mqprio: fix stack out-of-bounds write in tc entry parsing
Revert "net: mdio_bus: Use devm for getting reset GPIO"
selftests: net: packetdrill: xfail all problems on slow machines
net/packet: fix a race in packet_set_ring() and packet_notifier()
benet: fix BUG when creating VFs
net: airoha: npu: Add missing MODULE_FIRMWARE macros
net: devmem: fix DMA direction on unmapping
ipa: fix compile-testing with qcom-mdt=m
eth: fbnic: unlink NAPIs from queues on error to open
net: Add locking to protect skb->dev access in ip_output
...
Pull input updates from Dmitry Torokhov:
- updates to several drivers consuming GPIO APIs to use setters
returning error codes
- an infrastructure allowing to define "overlays" for touchscreens
carving out regions implementing buttons and other elements from a
bigger sensors and a corresponding update to st1232 driver
- an update to AT/PS2 keyboard driver to map F13-F24 by default
- Samsung keypad driver got a facelift
- evdev input handler will now bind to all devices using EV_SYN event
instead of abusing id->driver_info
- two new sub-drivers implementing 1A (capacitive buttons) and 21
(forcepad button) functions in Synaptics RMI driver
- support for polling mode in Goodix touchscreen driver
- support for support for FocalTech FT8716 in edt-ft5x06 driver
- support for MT6359 in mtk-pmic-keys driver
- removal of pcf50633-input driver since platform it was used on is
gone
- new definitions for game controller "grip" buttons (BTN_GRIP*) and
corresponding changes to xpad and hid-steam controller drivers
- a new definition for "performance" key
* tag 'input-for-v6.17-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (38 commits)
HID: hid-steam: Use new BTN_GRIP* buttons
Input: add keycode for performance mode key
Input: max77693 - convert to atomic pwm operation
Input: st1232 - add touch-overlay handling
dt-bindings: input: touchscreen: st1232: add touch-overlay example
Input: touch-overlay - add touchscreen overlay handling
dt-bindings: touchscreen: add touch-overlay property
Input: atkbd - correctly map F13 - F24
Input: xpad - use new BTN_GRIP* buttons
Input: Add and document BTN_GRIP*
Input: xpad - change buttons the D-Pad gets mapped as to BTN_DPAD_*
Documentation: Fix capitalization of XBox -> Xbox
Input: synaptics-rmi4 - add support for F1A
dt-bindings: input: syna,rmi4: Document F1A function
Input: synaptics-rmi4 - add support for Forcepads (F21)
Input: mtk-pmic-keys - add support for MT6359 PMIC keys
Input: remove special handling of id->driver_info when matching
Input: evdev - switch matching to EV_SYN
Input: samsung-keypad - use BIT() and GENMASK() where appropriate
Input: samsung-keypad - use per-chip parameters
...
Providers DTS examples should not contain consumer nodes, because they
are completely redundant, obvious (defined in common schema) and add
unnecessary bloat. Drop consumer examples and unneeded node labels.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
According to Devicetree specifications, device node names should be
generic, thus Mailbox provider should be called "mailbox", not "hsp".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
DTS example in the bindings should be indented with 2- or 4-spaces, so
correct a mixture of different styles to keep consistent 4-spaces.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Sven Peter <sven@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Lists should have fixed constraint, so add missing maxItems to the "reg"
property. Since minItems=maxItems, the minItems is implied by dtschema
so can be dropped.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Pull more SCSI updates from James Bottomley:
"This is mostly fixes and cleanups and code reworks that trickled in
across the merge window and the weeks leading up. The only substantive
update is the Mediatek ufs driver which accounts for the bulk of the
additions"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (37 commits)
scsi: libsas: Use a bool for sas_deform_port() second argument
scsi: libsas: Move declarations of internal functions to sas_internal.h
scsi: libsas: Make sas_get_ata_info() static
scsi: libsas: Simplify sas_ata_wait_eh()
scsi: libsas: Refactor dev_is_sata()
scsi: sd: Make sd shutdown issue START STOP UNIT appropriately
scsi: arm64: dts: mediatek: mt8195: Add UFSHCI node
scsi: dt-bindings: mediatek,ufs: add MT8195 compatible and update clock nodes
scsi: dt-bindings: mediatek,ufs: Add ufs-disable-mcq flag for UFS host
scsi: ufs: ufs-mediatek: Add UFS host support for MT8195 SoC
scsi: ufs: ufs-pci: Remove control of UIC Completion interrupt for Intel MTL
scsi: ufs: core: Do not write interrupt enable register unnecessarily
scsi: ufs: core: Set and clear UIC Completion interrupt as needed
scsi: ufs: core: Remove duplicated code in ufshcd_send_bsg_uic_cmd()
scsi: ufs: core: Move ufshcd_enable_intr() and ufshcd_disable_intr()
scsi: ufs: ufs-pci: Remove UFS PCI driver's ->late_init() call back
scsi: ufs: ufs-pci: Fix default runtime and system PM levels
scsi: ufs: ufs-pci: Fix hibernate state transition for Intel MTL-like host controllers
scsi: ufs: host: mediatek: Support FDE (AES) clock scaling
scsi: ufs: host: mediatek: Support clock scaling with Vcore binding
...
Pull Kbuild updates from Masahiro Yamada:
"This is the last pull request from me.
I'm grateful to have been able to continue as a maintainer for eight
years. From the next cycle, Nathan and Nicolas will maintain Kbuild.
- Fix a shortcut key issue in menuconfig
- Fix missing rebuild of kheaders
- Sort the symbol dump generated by gendwarfsyms
- Support zboot extraction in scripts/extract-vmlinux
- Migrate gconfig to GTK 3
- Add TAR variable to allow overriding the default tar command
- Hand over Kbuild maintainership"
* tag 'kbuild-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (92 commits)
MAINTAINERS: hand over Kbuild maintenance
kheaders: make it possible to override TAR
kbuild: userprogs: use correct linker when mixing clang and GNU ld
kconfig: lxdialog: replace strcpy() with strncpy() in inputbox.c
kconfig: lxdialog: replace strcpy with snprintf in print_autowrap
kconfig: gconf: refactor text_insert_help()
kconfig: gconf: remove unneeded variable in text_insert_msg
kconfig: gconf: use hyphens in signals
kconfig: gconf: replace GtkImageMenuItem with GtkMenuItem
kconfig: gconf: Fix Back button behavior
kconfig: gconf: fix single view to display dependent symbols correctly
scripts: add zboot support to extract-vmlinux
gendwarfksyms: order -T symtypes output by name
gendwarfksyms: use preferred form of sizeof for allocation
kconfig: qconf: confine {begin,end}Group to constructor and destructor
kconfig: qconf: fix ConfigList::updateListAllforAll()
kconfig: add a function to dump all menu entries in a tree-like format
kconfig: gconf: show GTK version in About dialog
kconfig: gconf: replace GtkHPaned and GtkVPaned with GtkPaned
kconfig: gconf: replace GdkColor with GdkRGBA
...
Pull more MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "mseal cleanups" (Lorenzo Stoakes)
Some mseal cleaning with no intended functional change.
- "Optimizations for khugepaged" (David Hildenbrand)
Improve khugepaged throughput by batching PTE operations for large
folios. This gain is mainly for arm64.
- "x86: enable EXECMEM_ROX_CACHE for ftrace and kprobes" (Mike Rapoport)
A bugfix, additional debug code and cleanups to the execmem code.
- "mm/shmem, swap: bugfix and improvement of mTHP swap in" (Kairui Song)
Bugfixes, cleanups and performance improvememnts to the mTHP swapin
code"
* tag 'mm-stable-2025-08-03-12-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (38 commits)
mm: mempool: fix crash in mempool_free() for zero-minimum pools
mm: correct type for vmalloc vm_flags fields
mm/shmem, swap: fix major fault counting
mm/shmem, swap: rework swap entry and index calculation for large swapin
mm/shmem, swap: simplify swapin path and result handling
mm/shmem, swap: never use swap cache and readahead for SWP_SYNCHRONOUS_IO
mm/shmem, swap: tidy up swap entry splitting
mm/shmem, swap: tidy up THP swapin checks
mm/shmem, swap: avoid redundant Xarray lookup during swapin
x86/ftrace: enable EXECMEM_ROX_CACHE for ftrace allocations
x86/kprobes: enable EXECMEM_ROX_CACHE for kprobes allocations
execmem: drop writable parameter from execmem_fill_trapping_insns()
execmem: add fallback for failures in vmalloc(VM_ALLOW_HUGE_VMAP)
execmem: move execmem_force_rw() and execmem_restore_rox() before use
execmem: rework execmem_cache_free()
execmem: introduce execmem_alloc_rw()
execmem: drop unused execmem_update_copy()
mm: fix a UAF when vma->mm is freed after vma->vm_refcnt got dropped
mm/rmap: add anon_vma lifetime debug check
mm: remove mm/io-mapping.c
...
Pull more i2c updates from Wolfram Sang:
"A few more patches from I2C. Some are fixes which would be nice to
have in rc1 already, some patches have nearly been fallen through the
cracks, some just needed a bit more testing.
- acpi: enable 100kHz workaround for DLL0945
- apple: add support for Apple A7–A11, T2 chips; Kconfig update
- mux: mule: fix error handling path
- qcom-geni: fix controller frequency mapping
- stm32f7: add DMA-safe transfer support
- tegra: use controller reset if device reset is missing
- tegra: remove unnecessary dma_sync*() calls"
* tag 'i2c-for-6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: muxes: mule: Fix an error handling path in mule_i2c_mux_probe()
i2c: Force DLL0945 touchpad i2c freq to 100khz
i2c: apple: Drop default ARCH_APPLE in Kconfig
i2c: qcom-geni: fix I2C frequency table to achieve accurate bus rates
dt-bindings: i2c: apple,i2c: Document Apple A7-A11, T2 compatibles
i2c: tegra: Remove dma_sync_*() calls
i2c: tegra: Use internal reset when reset property is not available
i2c: stm32f7: support i2c_*_dma_safe_msg_buf APIs
Pull f2fs updates from Jaegeuk Kim:
"Three main updates: folio conversion by Matthew, switch to a new mount
API by Hongbo and Eric, and several sysfs entries to tune GCs for ZUFS
with finer granularity by Daeho.
There are also patches to address bugs and issues in the existing
features such as GCs, file pinning, write-while-dio-read, contingous
block allocation, and memory access violations.
Enhancements:
- switch to new mount API and folio conversion
- add sysfs nodes to controle F2FS GCs for ZUFS
- improve performance on the nat entry cache
- drop inode from the donation list when the last file is closed
- avoid splitting bio when reading multiple pages
Bug fixes:
- fix to trigger foreground gc during f2fs_map_blocks() in lfs mode
- make sure zoned device GC to use FG_GC in shortage of free section
- fix to calculate dirty data during has_not_enough_free_secs()
- fix to update upper_p in __get_secs_required() correctly
- wait for inflight dio completion, excluding pinned files read using dio
- don't break allocation when crossing contiguous sections
- vm_unmap_ram() may be called from an invalid context
- fix to avoid out-of-boundary access in dnode page
- fix to avoid panic in f2fs_evict_inode
- fix to avoid UAF in f2fs_sync_inode_meta()
- fix to use f2fs_is_valid_blkaddr_raw() in do_write_page()
- fix UAF of f2fs_inode_info in f2fs_free_dic
- fix to avoid invalid wait context issue
- fix bio memleak when committing super block
- handle nat.blkaddr corruption in f2fs_get_node_info()
In addition, there are also clean-ups and minor bug fixes"
* tag 'f2fs-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (109 commits)
f2fs: drop inode from the donation list when the last file is closed
f2fs: add gc_boost_gc_greedy sysfs node
f2fs: add gc_boost_gc_multiple sysfs node
f2fs: fix to trigger foreground gc during f2fs_map_blocks() in lfs mode
f2fs: fix to calculate dirty data during has_not_enough_free_secs()
f2fs: fix to update upper_p in __get_secs_required() correctly
f2fs: directly add newly allocated pre-dirty nat entry to dirty set list
f2fs: avoid redundant clean nat entry move in lru list
f2fs: zone: wait for inflight dio completion, excluding pinned files read using dio
f2fs: ignore valid ratio when free section count is low
f2fs: don't break allocation when crossing contiguous sections
f2fs: remove unnecessary tracepoint enabled check
f2fs: merge the two conditions to avoid code duplication
f2fs: vm_unmap_ram() may be called from an invalid context
f2fs: fix to avoid out-of-boundary access in dnode page
f2fs: switch to the new mount api
f2fs: introduce fs_context_operation structure
f2fs: separate the options parsing and options checking
f2fs: Add f2fs_fs_context to record the mount options
f2fs: Allow sbi to be NULL in f2fs_printk
...
Pull printk updates from Petr Mladek:
- Add new "hash_pointers=[auto|always|never]" boot parameter to force
the hashing even with "slab_debug" enabled
- Allow to stop CPU, after losing nbcon console ownership during
panic(), even without proper NMI
- Allow to use the printk kthread immediately even for the 1st
registered nbcon
- Compiler warning removal
* tag 'printk-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: nbcon: Allow reacquire during panic
printk: Allow to use the printk kthread immediately even for 1st nbcon
slab: Decouple slab_debug and no_hash_pointers
vsprintf: Use __diag macros to disable '-Wsuggest-attribute=format'
compiler-gcc.h: Introduce __diag_GCC_all
Pull device mapper updates from Mikulas Patocka:
- fix checking for request-based stackable devices (dm-table)
- fix corrupt_bio_byte setup checks (dm-flakey)
- add support for resync w/o metadata devices (dm raid)
- small code simplification (dm, dm-mpath, vm-vdo, dm-raid)
- remove support for asynchronous hashes (dm-verity)
- close smatch warning (dm-zoned-target)
- update the documentation and enable inline-crypto passthrough
(dm-thin)
* tag 'for-6.17/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: set DM_TARGET_PASSES_CRYPTO feature for dm-thin
dm-thin: update the documentation
dm-raid: do not include dm-core.h
vdo: omit need_resched() before cond_resched()
md: dm-zoned-target: Initialize return variable r to avoid uninitialized use
dm-verity: remove support for asynchronous hashes
dm-mpath: don't print the "loaded" message if registering fails
dm-mpath: make dm_unregister_path_selector return void
dm: ima: avoid extra calls to strlen()
dm: Simplify dm_io_complete()
dm: Remove unnecessary return in dm_zone_endio()
dm raid: add support for resync w/o metadata devices
dm-flakey: Fix corrupt_bio_byte setup checks
dm-table: fix checking for rq stackable devices
Pull RTC updates from Alexandre Belloni:
"Support for a new RTC in an existing driver and all the drivers
exposing clocks using the common clock framework have been converted
to determine_rate(). Summary:
Subsystem:
- Convert drivers exposing a clock from round_rate() to determine_rate()
Drivers:
- ds1307: oscillator stop flag handling for ds1341
- pcf85063: add support for RV8063"
* tag 'rtc-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits)
rtc: ds1685: Update Joshua Kinard's email address.
rtc: rv3032: convert from round_rate() to determine_rate()
rtc: rv3028: convert from round_rate() to determine_rate()
rtc: pcf8563: convert from round_rate() to determine_rate()
rtc: pcf85063: convert from round_rate() to determine_rate()
rtc: nct3018y: convert from round_rate() to determine_rate()
rtc: max31335: convert from round_rate() to determine_rate()
rtc: m41t80: convert from round_rate() to determine_rate()
rtc: hym8563: convert from round_rate() to determine_rate()
rtc: ds1307: convert from round_rate() to determine_rate()
rtc: rv3028: fix incorrect maximum clock rate handling
rtc: pcf8563: fix incorrect maximum clock rate handling
rtc: pcf85063: fix incorrect maximum clock rate handling
rtc: nct3018y: fix incorrect maximum clock rate handling
rtc: hym8563: fix incorrect maximum clock rate handling
rtc: ds1307: fix incorrect maximum clock rate handling
rtc: pcf85063: scope pcf85063_config structures
rtc: Optimize calculations in rtc_time64_to_tm()
dt-bindings: rtc: amlogic,a4-rtc: Add compatible string for C3
rtc: ds1307: handle oscillator stop flag (OSF) for ds1341
...
Pull non-MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "squashfs: Remove page->mapping references" (Matthew Wilcox) gets
us closer to being able to remove page->mapping
- "relayfs: misc changes" (Jason Xing) does some maintenance and
minor feature addition work in relayfs
- "kdump: crashkernel reservation from CMA" (Jiri Bohac) switches
us from static preallocation of the kdump crashkernel's working
memory over to dynamic allocation. So the difficulty of a-priori
estimation of the second kernel's needs is removed and the first
kernel obtains extra memory
- "generalize panic_print's dump function to be used by other
kernel parts" (Feng Tang) implements some consolidation and
rationalization of the various ways in which a failing kernel
splats information at the operator
* tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (80 commits)
tools/getdelays: add backward compatibility for taskstats version
kho: add test for kexec handover
delaytop: enhance error logging and add PSI feature description
samples: Kconfig: fix spelling mistake "instancess" -> "instances"
fat: fix too many log in fat_chain_add()
scripts/spelling.txt: add notifer||notifier to spelling.txt
xen/xenbus: fix typo "notifer"
net: mvneta: fix typo "notifer"
drm/xe: fix typo "notifer"
cxl: mce: fix typo "notifer"
KVM: x86: fix typo "notifer"
MAINTAINERS: add maintainers for delaytop
ucount: use atomic_long_try_cmpxchg() in atomic_long_inc_below()
ucount: fix atomic_long_inc_below() argument type
kexec: enable CMA based contiguous allocation
stackdepot: make max number of pools boot-time configurable
lib/xxhash: remove unused functions
init/Kconfig: restore CONFIG_BROKEN help text
lib/raid6: update recov_rvv.c zero page usage
docs: update docs after introducing delaytop
...
i2c-host for v6.17, part 2
- apple: add support for Apple A7–A11, T2 chips
- qcom-geni: fix controller frequency mapping
- stm32f7: add DMA-safe transfer support
- tegra: use controller reset if device reset is missing
- tegra: remove unnecessary dma_sync*() calls
